Pr
el
im
in
ar
y
Analog Devices Welcomes
Hittite Microwave Corporation
www.analog.com
www.hittite.com
Pr
el
im
in
ar
y
THIS PAGE INTENTIONALLY LEFT BLANK
HMC392A
v00.1115
Typical Applications
Features
The HMC392A is ideal for:
Gain: 15.5 dB
• Point-to-Point Radios
Noise Figure: 2.4 dB
• VSAT
Single Supply Voltage: +5V
50 Ohm Matched Input/Output
• LO Driver for HMC Mixers
3
No External Components Required
• Space
Small Size: 1.3 x 1.0 x 0.1 mm
Functional Diagram
General Description
y
• Military EW, ECM, C I
The HMC392A is a GaAs MMIC Low Noise
Amplifi er die which operates between 3.5 and
7.0 GHz. The amplifi er provides 15.5 dB of gain,
2.4 dB noise fi gure, and 28 dBm IP3 from a +5V
supply voltage. The HMC392A has six bonding
adjustment options which allow the user to select
the bias point and output power of the device
(+15 to +18 dBm). The HMC392A a m p l i f i e r
can
easily
be
integrated
into
M u l t i - C h i p - Modules (MCMs) due to its small
(1.3 mm2) size. All data is with the chip in a 50 Ohm
test fi xture connected via 0.025mm (1 mil) diameter
wire bonds of minimal length 0.31mm (12 mils).
in
ar
im
Pr
el
LOW NOISE AMPLIFIERS - CHIP
1
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Electrical Specifi cations, TA = +25° C, Vdd = 5V
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
4.0 - 6.0
13
Typ.
Max.
3.5 - 7.0
GHz
15.5
19
14
19
dB
0.018
0.025
0.018
0.025
dB/ °C
Noise Figure
2.4
3.0
2.8
3.4
dB
Input Return Loss
15
10
Output Return Loss
15
10
dB
16
dBm
18
dBm
Gain Variation Over Temperature
Output Power for 1 dB Compression (P1dB)
13
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
16
11.5
Units
12
18
25
Supply Current (Idd)
28
50
23
66
dB
28
50
dBm
66
mA
Note: Data taken with pads PS4 and PS8 bonded to ground (state 5) unless otherwise noted.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC392A
v00.1115
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Absolute Maximum Ratings
7 Vdc
RF Input Power (RFIN)(Vdd = +5 Vdc)
+11 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 7.1 mW/°C above 85 °C)
0.64 W
Thermal Resistance
(channel to die bottom)
140 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85° C
Idd (mA)
+4.5
49
+5.0
50
+5.5
51
Pr
el
im
in
ar
y
(State 5 Depicted)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Vdd (Vdc)
LOW NOISE AMPLIFIERS - CHIP
Drain Bias Voltage (Vdd)
2
Typical Supply Current vs. Vdd
NOTES:
1. ALL DIMENSIONS IN INCHES [MILLIMETERS]
2. ALL TOLERANCES ARE ±0.001 (0.025)
3. DIE THICKNESS IS 0.004 (0.100) BACKSIDE IS GROUND
4. BOND PADS ARE 0.004 (0.100) SQUARE
5. BOND PAD SPACING, CTR-CTR: 0.006 (0.150)
6. BACKSIDE METALLIZATION: GOLD
7. BOND PAD METALLIZATION: GOLD
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
2