RL6118VRMVICAT
RL6126VRMVICAT
Catalog No.
6” Remodel ICAT Compact Fluorescent
Recessed Housing
Type
Project
Specifications/Features
Housing/Mounting
6-3/8" aperture size.
Compact design to insert into solid or suspended ceilings
Insulated ceiling, thermally protected housing.
Works in ceiling thickness up to 1/2" with push-in mounting springs.
Spring-latch access plates.
High performance tested for StopAire™ according to ASTM-283.
Lamp/Electrical
Vertical lamp position.
RL6118VRMVICAT: (1) 18W DTT or TRT 4PIN, G24Q-2 or GX24Q-2 base.
RL6126VRMVICAT: (1) 26W DTT or TRT 4PIN, G24Q-2 or GX24Q-3 base.
Prewired junction box with convenient screwdriver pry-outs:
(4) 1/2", (1) 1/2" and 3/4" concentric and (4) Romex knockouts.
Approved for through-branch (4-in/4-out) (8) #12 AWG wiring.
Electronic 120V ballast.
Class P thermally protected by internal fuse in electronic ballast.
End of lamp life protection circuit; program start for extended lamp life
Sound rating: A
Maximum input (18W) current: @ 120V (.15A)
Maximum input (26W) current: @ 120V (.24A)
16-1/4"
7-1/2"
Trims
Choice of open baffled trim, specular reflector or black baffle trim with
sandblasted glass lens.
See “Trims for 6" VRMVICAT Compact Fluorescent Recessed Housings”
spec sheet for trim information and details.
6-7/8"
Warranty
This fixture is covered for two (2) years by a full replacement guarantee
after date of purchase.
Electronic ballast has a five (5) year warranty.
Ceiling Opening: 6-3/8"
Listing
cULus listed.
Conforms to Washington State Energy Code for low air infiltration.
New York State Energy Code compliant.
Ordering Information
Example Order:
RL6118VRMVICAT
CTR161902V-WHT
Housing
Trims
RL6118VRMVICAT - 18W DTT/TTT Housing
RL6126VRMVICAT - 26W DTT/TTT Housing
See “Trims for 6" VRMVICAT Compact Fluorescent Recessed Housings”
spec sheet for trim information and details.
1-847-559-5500
www.contechlighting.com
Please
Recycle
All specifications subject to change without notice.
Trims for 6" VRMVICAT
Compact Fluorescent
Recessed Housings
Catalog No.
Type
Project
All trims are compatable with 6 Inch ICAT Vertical Lamp Compact Fluorescent Recessed Housings.RL6118VRMVICAT and RL6126VRMVICAT.
All trims have white trim finish unless specified.
All trims are cULus listed.
All trims are suitable for damp locations; only shower trims are listed for wet locations.
8-1/8"
O.D.
CTR1903-P
2-1/2" x 4-3/4"
Aperture
5-3/4"
I.D.
7-7/8"
O.D.
CTR161901V-B
CTR161902V-CLR
CTR161901V-P
CTR161902V-PL
CTR161901V-P-WHT
CTR161902V-WHT
Black Baffle, Clear Reflector, Black Plastic Trim Ring
Scoop Wall Wash
White beveled steel trim ring. Polythylene sponge
gaskets. (2) Butterfly spring clips. All steel construction.
Black Baffle, Clear Reflector, White Plastic Trim Ring
White Baffle, White Reflector, White Plastic Trim Ring
6-1/4"
I.D.
6"
I.D.
7-1/4"
O.D.
CTR161905V-P
CTR161903V-PL
Baffle collar. Convex frosted lens. Clear specular upper
reflector. White trim ring.
5"
I.D.
6"
I.D.
7-7/8"
O.D.
White specular reflector supported by (3) chrome posts,
1-1/4" drop from ceiling.
8-1/8"
O.D.
CTR161913-P
CTR161916-P
Clear Reflector with Lexan Trim. White trim ring. Wet
location listed.
Glass lens, 1-1/2" drop. Clear reflector with Lexan trim.
White trim ring. Wet location listed.
Fresnel Lens
White Specular Reflector
Floating Etched Glass Trim
8-1/8"
O.D.
5"
I.D.
Matte Platinum Specular Reflector
CTR162615V-P
Black Baffle Collar
Self-flanged Platinum Specular Reflector
7-7/8"
O.D.
Clear Specular Reflector
7-1/4"
O.D.
CTR161903V-CLR
Self-flanged Clear Specular Reflector
6"
I.D.
Drop Opal Shower Light
Reflector/Trim Finishes
Reflector Finish Options:
WHT - White
CLR - Clear
1-847-559-5500
PL
- Matte Platinum
Trim Finish Codes:
B
www.contechlighting.com
P - White
- Black
Please
Recycle
All specifications subject to change without notice.