RL6118VRMVICAT RL6126VRMVICAT Catalog No. 6” Remodel ICAT Compact Fluorescent Recessed Housing Type Project Specifications/Features Housing/Mounting 6-3/8" aperture size. Compact design to insert into solid or suspended ceilings Insulated ceiling, thermally protected housing. Works in ceiling thickness up to 1/2" with push-in mounting springs. Spring-latch access plates. High performance tested for StopAire™ according to ASTM-283. Lamp/Electrical Vertical lamp position. RL6118VRMVICAT: (1) 18W DTT or TRT 4PIN, G24Q-2 or GX24Q-2 base. RL6126VRMVICAT: (1) 26W DTT or TRT 4PIN, G24Q-2 or GX24Q-3 base. Prewired junction box with convenient screwdriver pry-outs: (4) 1/2", (1) 1/2" and 3/4" concentric and (4) Romex knockouts. Approved for through-branch (4-in/4-out) (8) #12 AWG wiring. Electronic 120V ballast. Class P thermally protected by internal fuse in electronic ballast. End of lamp life protection circuit; program start for extended lamp life Sound rating: A Maximum input (18W) current: @ 120V (.15A) Maximum input (26W) current: @ 120V (.24A) 16-1/4" 7-1/2" Trims Choice of open baffled trim, specular reflector or black baffle trim with sandblasted glass lens. See “Trims for 6" VRMVICAT Compact Fluorescent Recessed Housings” spec sheet for trim information and details. 6-7/8" Warranty This fixture is covered for two (2) years by a full replacement guarantee after date of purchase. Electronic ballast has a five (5) year warranty. Ceiling Opening: 6-3/8" Listing cULus listed. Conforms to Washington State Energy Code for low air infiltration. New York State Energy Code compliant. Ordering Information Example Order: RL6118VRMVICAT CTR161902V-WHT Housing Trims RL6118VRMVICAT - 18W DTT/TTT Housing RL6126VRMVICAT - 26W DTT/TTT Housing See “Trims for 6" VRMVICAT Compact Fluorescent Recessed Housings” spec sheet for trim information and details. 1-847-559-5500 www.contechlighting.com Please Recycle All specifications subject to change without notice. Trims for 6" VRMVICAT Compact Fluorescent Recessed Housings Catalog No. Type Project All trims are compatable with 6 Inch ICAT Vertical Lamp Compact Fluorescent Recessed Housings.RL6118VRMVICAT and RL6126VRMVICAT. All trims have white trim finish unless specified. All trims are cULus listed. All trims are suitable for damp locations; only shower trims are listed for wet locations. 8-1/8" O.D. CTR1903-P 2-1/2" x 4-3/4" Aperture 5-3/4" I.D. 7-7/8" O.D. CTR161901V-B CTR161902V-CLR CTR161901V-P CTR161902V-PL CTR161901V-P-WHT CTR161902V-WHT Black Baffle, Clear Reflector, Black Plastic Trim Ring Scoop Wall Wash White beveled steel trim ring. Polythylene sponge gaskets. (2) Butterfly spring clips. All steel construction. Black Baffle, Clear Reflector, White Plastic Trim Ring White Baffle, White Reflector, White Plastic Trim Ring 6-1/4" I.D. 6" I.D. 7-1/4" O.D. CTR161905V-P CTR161903V-PL Baffle collar. Convex frosted lens. Clear specular upper reflector. White trim ring. 5" I.D. 6" I.D. 7-7/8" O.D. White specular reflector supported by (3) chrome posts, 1-1/4" drop from ceiling. 8-1/8" O.D. CTR161913-P CTR161916-P Clear Reflector with Lexan Trim. White trim ring. Wet location listed. Glass lens, 1-1/2" drop. Clear reflector with Lexan trim. White trim ring. Wet location listed. Fresnel Lens White Specular Reflector Floating Etched Glass Trim 8-1/8" O.D. 5" I.D. Matte Platinum Specular Reflector CTR162615V-P Black Baffle Collar Self-flanged Platinum Specular Reflector 7-7/8" O.D. Clear Specular Reflector 7-1/4" O.D. CTR161903V-CLR Self-flanged Clear Specular Reflector 6" I.D. Drop Opal Shower Light Reflector/Trim Finishes Reflector Finish Options: WHT - White CLR - Clear 1-847-559-5500 PL - Matte Platinum Trim Finish Codes: B www.contechlighting.com P - White - Black Please Recycle All specifications subject to change without notice.