Document 12112504

advertisement
March 6, 2015 TO: ALL BIDDERS OF RECORD RE: H59‐6060‐MJ: Horry Georgetown Grand Strand Culinary Building Construction ADDENDUM #3
The following items shall take precedence over the drawings and specifications for the above named project and shall become part of the Contract Documents. Where any item called for in the specifications, or indicated on the drawings is not supplemented hereby, the original requirements shall remain in effect. Where any original item is amended, voided, or suspended hereby, the provisions of such item not specifically amended, voided or superseded, shall remain in effect. PROJECT MANUAL: Form SE‐310, Invitation for Construction Services: 1. Revise Bid Closing Date from 3/12/2015 to 4/2/2015. The Bid is delayed due to extended review by the Economic Development Administration. Please note that this also allows more time for questions and substitution requests. 2. Bid opening time is still 3:00 p.m. Location has been revised: HGTC Conway Campus, Building 100, Room 107 (Boardroom) 2050 Hwy. 501 East, Conway, SC Section 055000 Add paragraph 2.15 as follows: 2.15 STAINLESS STEEL FABRICATIONS AT BARBEQUE OVEN A.
Stainless Steel: Stainless steel shall be non‐magnetic corrosion resistant chromium‐nickel steel, Type 304 (18‐8 alloy), polished to #4 finish where exposed (excluding rods), unless otherwise noted. Gauges/thickness shall be as noted on drawings. B.
Bifold Doors. 1. Bifold doors shall be custom fabricated to sizes indicated on drawings. 2. Provide cutouts, fittings and anchorages as needed to coordinate assembly and installation with other work. Provide integrally welded steel strap anchors at frames for embedding in concrete. 3. Provide stainless steel hardware as noted on drawings. a. Spring handles: 6" stainless steel, type 302, 1/8" diameter, with 1/2" core. b. Hinges: Weld‐on bullet hinges, stainless steel, 3" high, with 5/16" pin diameter. C.
Cooking grates 1. Cooking grates shall be custom fabricated. Provide three panels, approximate size of 2'‐3" x 3'x3'‐2 1/2". Size shall be field verified after construction of concrete barbeque oven prior to fabrication of grates. Measurements for grates shall be 1/2" less than actual field 1 of 5 measurement of wall‐to‐wall measurement inside oven. 2. Field of grate shall be 1/4" diameter stainless steel rods placed at 1" o.c. welded to perimeter edging of 1/4"x1" (vertical orientation). Weld cross rods at 9" o.c. under crossing rods with ends welded to perimeter edging. Section 083113.01 1. Revise name of section from "Roof Access Doors and Frames" to "Exterior Access Doors and Frames". 2. Add new 2.01‐B to read as follows: B. For Barbeque access panels: TMS series panel by J.L. Industries, Inc. 3. Revise current 2.01‐B (Acceptable Manufacturers) to 2.01‐C. 4. Add new 2.02‐B to read as follows: B. J.L. Industries Style TMS Multipurpose Flush Stainless Steel Access Panel. 1. Size per drawings. 2. Frame: 18 gauge stainless steel with 1" wall flange. 3. Door: 16 gauge stainless steel with continuous stainless steel hinge. 4. Finish: 304 stainless steel, #4 satin finish. 5. Lock: Flush Screwdriver operated steel cam. 5. Revise 2.03‐D to read: "Stainless steel Sheet, Strip, Plate, and Flat Bars: ASTM A 666, Type 304 or 316. Remove tool and die marks and stretch lines or blend into finish." DRAWINGS: Sheet A‐357 At Detail 2/A‐357, at right side of detail, replace notation 'Stainless steel cooking grate set on galv. steel angle.' with the following: '(3) 2'‐3"x3'‐2 1/2" stainless steel cooking grates. Set on stainless steel angle. Field verify size of grates prior to manufacture.' At Detail 2/A‐357, at right side of detail, replace notation 'Galvanized steel angle with stud bolts. Refer to Structural drawings (typ.).' with the following: '2"x2"x3/16" stainless steel angle with stainless steel stud bolts. Install at front and back of oven to support cooking grates.' Sheet A‐364 At Detail 3/A‐364, delete '3/4"' from the notations stating '3/4" Hard Coat Stucco' (two places). Delete notation for "Water resistive barrier" for soffit only. Base coat of soffit will be applied directly to sheathing after sheathing prepped per coating manufacturer's specifications. 2 of 5 Sheet A‐423 Sheet A‐423 – Interior Elevations Reissued. Clarification of the wall base at the tile floor portion of the Demo Kitchen has been added to elevations C1, C3, and C5. PTF‐12 should be installed at tiled floor area at head wall of Kitchen, and wrap around wall to nearest inside corner. (There it can transition back to rubber base). Rear accent wall tile shown on elevation C4 also updated to reflect GTW‐4 and GTW‐5 as the correct tile specifications. (Adobe.pdf file attached to this addendum) Sheet A‐621 Sheet A‐621 – Finish Legend Reissued. Carpet, CPT‐2 specification has been modified for the Demo Auditorium. New specification is as follows: Tandus, Iso 04536, Wired 48201, Install with Powerbond Cushion Dryback. Adhesives for use on stairs: Taylor 1NC or Parabond M250. (Adobe.pdf file attached to this addendum) Sheet A‐623 Sheet A‐623 – Room Finish Schedule Reissued. Additional wall base clarification added to schedule in Room 122C Demo Kitchen, PTF‐12. Accent wall tile also corrected to GTW‐4 in lieu of GTW‐1. (Adobe.pdf file attached to this addendum) Sheet E‐504 At enlarged Demo Kitchen Plan, revise Keyed Note 3 to read: “POWER FOR FURNITURE/CASEWORK. COORDINATE LOCATION OF DEVICES PER MANUFACTURERS INSTALLATION INSTRUCTIONS. ELECTRICAL CONTRACTOR SHALL MAKE FINAL CONNECTION TO BRANCH CIRCUIT FOR A FULLY FUNCTIONING SYSTEM INCORPORATING ALL PRE‐
MANUFACTURED WIRING DEVICES.” Sheet FS‐102 At Schedule of Foodservice Equipment & Connections, for Item 3‐132, delete the phrase "spare number" and add description "Waste Containers", and show "6" for the quantity. RESPONSE TO QUESTIONS: 1. Specs call for basecoat, mesh and finish on soffits and not stucco, the plan shows 3/4" stucco, please advise which is correct. Ref. Detail 3/A‐364. The specification 092423 Stucco Soffits is correct. The 3/4" depth given is removed from detail in Drawing section above. 3 of 5 1A. If the specs are correct and the soffits are base coat, mesh and finish, the trims will need to be picked up by the sheathing contractor. It is the responsibility of the General Contractor to verify that all components of the work are included in his bid. 2. Room 122C, Demo Kitchen, Finish Schedule calls for Rubber Base. Does rubber base go in the hard tile area also? The rubber base (RB‐2) does not go into the hard tiled area of the Demo Kitchen. The floor tile shall be used in this area as a base, and match the 8" height of the rubber base. That is, PTF‐2 will be used as the wall base, only at the tiled area of the Demo Kitchen. See corrections in Drawing section of this addendum. 3. In Detail 2, sheet A‐357, no size is provided for the Stainless Steel Cooking Grate. Will this be furnished by the Food Service Vendor? This will be a custom fabrication (adding specification in Project Manual section above). Approximate size for grate will be three sections of 2'‐3" x 3'‐2 1/2", but should be field verified after barbeque oven is poured. Assignment of supplier will be up to G.C. 4. Stainless Steel Access Doors and Bifold Steel Doors to Barbeque Oven are not sized or Specified. Will these also be provided by the Food Service Vendor? The access door is sized at Detail 1, Sheet A‐357 (24"X16"). Specification is added in Project Manual section of this Addendum. The Bifold doors are sized at Detail 1, Sheet A‐358. These are custom fabrications. Assignment of supplier will be up to G.C. 5. Detail 2, sheet A‐357 shows galvanized angles in the fire pit to support the stainless steel cooking grate. Is it possible that when the barbeque pit is used that the galvanized angles would give off fumes as they get hot? A good observation. The support angles shall be stainless steel ( notations changed in Drawing section of this Addendum.) 6. For the three‐colored random masonry pattern you are looking for, do you think you would be looking at all lighter units or darker units? This question arose from the fact that, for at least one supplier, lighter masonry units of the type specified for the veneer are a higher cost item due to the inclusion of white cements versus gray cements. For this project, bids shall be based on Architectural Concrete Shotface unit masonry that use white cements. 7. I have questions regarding item 19‐153 Curing Rack. It is specified to have two(2) tiers on casters. Having two(2) shelves on casters makes the unit unstable. It requires either a 3‐sided frame or one more shelf for the middle for stability. With that being said, Metro’s 3‐sided frame for a 21 x 42” is not a 4 of 5 standard product. There are two(2) options to go with. 1. Change the size to 24 x 36 and 24 x 48 for the 3‐sided frame. This accommodates the space used by the two(2) 21 x 42 units. 2. Add one more 21 x 42 shelf to the middle of the unit. My other question is what are the 24 pairs of S‐Hooks being used for? S‐Hooks are used on stationary shelves in place of a post. Not applicable in this scenario. Add center shelf to the unit at the size already specified. The S‐hooks will be used to hang products that are being cured, and are to remain in the bid package. SUBSTITUTION REQUESTS: Division 06 EB Endres is Not Approved as an acceptable supplier of millwork nor casework in this specifcation. 096723 Resinous Flooring Tennant Company is Not Approved as an acceptable supplier for this specification. Florock is Approved as an acceptable supplier for this specification with the following requirement: Florock Epoxy 100% Solid Colorants shall be used in the system to achieve color and blending to be approved by Architect. Key Resin is Approved as an acceptable supplier for this specification. 114000 Food Service Equipment Dewey's Service Company is Approved as an acceptable supplier for this specification. (note: this supplier was not approved in error by Addendum #2.) END OF ADDENDUM #3 5 of 5 E
HORRY-GEORGETOWN
GRAND STRAND
CULINARY ARTS
BUILDING
CONSTRUCTION
PLASTIC LAMINATE WALL PANELS. P.LAM.
COLORS ALTERNATE ON EACH "FACE";
MULTIPLE COLORS USED (PLM-3-8), REFER
TO KEY FOR COLOR LOCATION. PAINTED
WALL BEYOND, PNT-1
PLASTIC LAMINATE WALL PANELS KEY
PLM-3
PLM-6
PLM-4
PLM-7
PLM-5
MOZINGO + WALLACE
ARCHITECTS, LLC
PLM-8
618 CHESTNUT RD., STE. 205, M.B. , SC 29572
TEL. 843.449.8000
FAX 843.843.1113
admin@mozingowallace.com
D1
DEMO KITCHEN - PLASTIC LAM. WALL PANELS
1/4" = 1'-0"
D
LS3P ASSOCIATES LTD.
ANGLED WALL
205 1/2 KING ST. CHARLESTON SC 29401
TEL. 843.577.4444
REAR WALL
GYP-1
A4
A-301
GTW-4, (TYP)
PNT-9
RECESS IN
SURROUND
D3
A-761
C
D1
A-761
D1
D2
A-761
A-761
10"
NOTE:
NOMINAL SIZE OF
GLAZED WALL AND
GLASS TILE VARY
SLIGHTLY. COORDINATE
WITH ARCHITECT ON
GROUT INSTALLATION.
D5
A-761
A-761
1'-5"
1'-2"
3'-0"
3'-0"
1'-5"
A4
ALIGN
RECESSED FLAT SCREEN
MONITOR PER A/V DWGS
& LINE ARRAY SPEAKERS
PER A/V DRAWINGS
(FABRIC WALL COVERING
TO CONCEAL SPEAKER
FACE). GC TO PROVIDE
BLOCKING.
2'-0"
2'-0"
SFW-2
10"
PTF-12
WRAP TILE BASE AROUND WALL
AND STOP AT NEAREST INSIDE CORNER
SFW-2
CHW-3
CUSTOM FRONT LAMINATE
PANEL, PLM-9
1
1
1
8"
10"
8"
PTF-12
DEMO KITCHEN
C3
1/4" = 1'-0"
10"
10"
10"
8"
8"
3/4" REVEALS TO MATCH
BACK WALL.
PLASTIC LAMINATE
WALL PANELS
WITH REVEALS,
TYP. (PLM-9)
ALIGN
SFW-2
PTF-12
10"
ALIGN
QSS-2,
WATERFALL EDGE
PLM-9
SFW-2
HATCH TILE
INDICATES GTW-5
ALIGN
RECESSED FLAT SCREEN
MONITOR PER A/V DWGS
& LINE ARRAY SPEAKERS
PER A/V DRAWINGS
(FABRIC WALL COVERING
TO CONCEAL SPEAKER
FACE). GC TO PROVIDE
BLOCKING.
HOOD
SURROUND
MET-2
10"
2'-0"
1'-2"
A-124
ALIGN
2'-0"
PLASTIC LAMINATE
WALL PANELS WITH
3/4" REVEALS, TYP.
(PLM-9)
FLAT SCREEN MONITOR
PER A/V DWGS. GC TO
PROVIDE BLOCKING.
B2
WWW.LS3P.COM
1
2'-0"
2'-0"
ALIGN
C1
FAX 843.722.4789
DEMO KITCHEN - REAR WEST
QSS-2
C4
3/8" = 1'-0"
PLM-9
CHW-3
CUSTOM FRONT LAMINATE
PANEL, PLM-9
CHW-2, TYP.
DEMO KITCHEN - REAR
C5
3/8" = 1'-0"
PTF-12
WRAP TILE BASE AROUND WALL
AND STOP AT NEAREST INSIDE CORNER
1
DEMO KITCHEN - REAR EAST
3/8" = 1'-0"
MEMBERS OF THE AMERICAN INSTITUTE OF ARCHITECTS
B2
A-606
D3
D1
D2
A-761
A-761
COPYRIGHT 2013 ALL RIGHTS RESERVED
PRINTED OR ELECTRONIC DRAWINGS AND
DOCUMENTATION MAY NOT BE REPRODUCED
IN ANY FORM WITHOUT WRITTEN PERMISSION
FROM MOZINGO + WALLACE ARCHITECTS,
LLC AND LS3P ASSOCIATES LTD.
A-761
FOOD SERVICE EQUIPMENT
PER FOOD SERVICE DRAWINGS
2"
DUPLEX OUTLET
PER ELECTRICAL
2"
REVISIONS:
B
FEB
FEB
No.
Description
1
Bid Addendum #3
Date
03/06/15
PNT-1
1'-6"
3'-0"
1'-11 1/2"
1'-11 1/2"
3'-0"
1'-6"
RB-1
CORRIDOR ELEVATION
B5
1/4" = 1'-0"
f10b
f8b
f6b
f4b
DEMO KITCHEN ISLAND REAR
1/2" = 1'-0"
f2b
OSE PROJECT #:
1202-130790
DATE:
OCTOBER 28, 2014
DRAWN BY:
WBA/KG/JAR
CHECKED BY:
RB
INTERIOR
ELEVATIONS
A
VWC-2
3/5/2015 5:06:55 PM
C:\Users\kellygilreath\Documents\HGTC Culinary - INTERIOR_2013_kellygilreath.rvt
B1
RB-1
A1
A-423
RB-1
OFFICE ELEVATION
1/4" = 1'-0"
SOLUTIONS THROUGH LISTENING
SERVICE BY DESIGN
1
2
3
4
5
6
CONSTRUCTION DOCUMENTS
ROOM FINISH LEGEND
E
D
C
A
3/5/2015 5:06:55 PM
C:\Users\kellygilreath\Documents\HGTC Culinary - INTERIOR_2013_kellygilreath.rvt
B
CODE
DESCRIPTION
DIVISION 5 METAL
MDPY-1
METAL DRAPERY
MET-1
DECORATIVE METAL
MET-2
DECORATIVE METAL
MET-3
DECORATIVE METAL
DIVISION 6 WOOD AND PLASTICS
CHW-1
CABINET HARDWARE
CHW-2
CABINET HARDWARE
CHW-3
CABINET HARDWARE
MDFP-1
MEDIUM DENSITY FIBERBOARD PANEL
Hafele
Hafele
Cliffside Industries
Interlam
Decorative Stainless Steel Look, Item #: 101.20.729
Decorative Stainless Steel Look, Item #: 101.20.723
D85D53-64-SS Stainless Steel Refrigerator Pull
Art Diffusion, DMD 350 II, Horizontal Pattern Direction
Brushed/Satin Nickel
Brushed/Satin Nickel
Brushed Natural Stainless Steel
Non-Gloss Foil, (O) Street Sign
MDFP-2
Interlam
Art Diffusion, ELP001, Vertical Pattern Direction
Non-Gloss Foil, (O) Milky Sketch
PLM-1
PLASTIC LAMINATE
PLM-2
PLASTIC LAMINATE
PLM-3
PLASTIC LAMINATE
PLM-4
PLASTIC LAMINATE
PLM-5
PLASTIC LAMINATE
PLM-6
PLASTIC LAMINATE
PLM-7
PLASTIC LAMINATE
PLM-8
PLASTIC LAMINATE
PLM-9
PLASTIC LAMINATE
PLM-10
PLASTIC LAMINATE
PLM-11
PLASTIC LAMINATE
PLM-12
PLASTIC LAMINATE
PLM-13
PLASTIC LAMINATE
QSS-1
QUARTZ SOLID SURFACING
QSS-2
QUARTZ SOLID SURFACING
SPP-1
SOLID POLYMER PANELS
SS-1
SOLID SURFACING
SS-2
SOLID SURFACE
SSW-1
SCULPTURAL SCREEN WALL
DIVISION 8 GLAZING
WF-1
WINDOW FILM
DIVISION 9 FINISHES - CEILINGS
ACT-IA
ACOUSTICAL CEILING TILE
ACT-IB
ACOUSTICAL CEILING TILE
ACT-IC
ACOUSTICAL CEILING TILE
ACT-II
ACOUSTICAL CEILING TILE
Wilsonart
Wilsonart
Abet Laminati
Abet Laminati
Abet Laminati
Abet Laminati
Abet Laminati
Abet Laminati
Abet Laminati
Wilsonart
Pionite
Formica
Abet Laminati
Cambria
HanStone
Lumicor
Corian
Corian
Modular Arts
Cosmic Strandz
Cosmic Strandz
4941K-18
4940K-18
1812, Finish: SEI
861, Finish: LUC-2
835, Finish: SEI
835, Finish: Millerighe
834, Finish: Millerighe
887, Finish: LUC-2
1672, Finish: Soft
4845-60
Moonlighting Papel AV971
923-58, Surf, Matte Finish
409, Grainwood Finish
Whitehall 0120
Sandcastle CL106
Finish: Matte (both sides)
Silver Birch
Cameo White
Painted: Sherwin Williams, SW0068 Copen Blue
ACT-III
ACT-IV
ACOUSTICAL CEILING TILE
ACOUSTICAL CEILING TILE
Conwed
USG
ACT-V
ACOUSTICAL CEILING TILE
USG
ACT-VI
ACOUSTICAL CEILING TILE
USG
MEDIUM DENSITY FIBERBOARD PANEL
EXP-1
EXPOSED CEILING
EXP-2
EXPOSED CEILING
EXP-3
EXPOSED CEILING
GYP-1
GYPSUM BOARD CEILING
GYP-2
GYPSUM BOARD CEILING
GYP-3
GYPSUM BOARD CEILING
GYP-4
GYPSUM BOARD CEILING
GYP-5
GYPSUM BOARD CEILING
GYP-6
GYPSUM BOARD CEILING
GYP-7
GYPSUM BOARD CEILING
GYP-8
GYPSUM BOARD CEILING
GYP-9
GYPSUM BOARD CEILING
GYP-10
GYPSUM BOARD CEILING
GYP-11
GYPSUM BOARD CEILING
DIVISION 9 FINISHES - FLOORS
CPT-1
CARPET, TILE
CPT-2
CARPET, POWERBOND
CPT-3
CARPET, TILE
CPT-4
CARPET, TILE
PTF-1
PORCELAIN TILE, FLOOR
PTF-2
PORCELAIN TILE, FLOOR
PTF-3
PORCELAIN TILE, FLOOR
PTF-4
PORCELAIN TILE, FLOOR
PTF-5
NOT USED
PTF-6
PORCELAIN TILE, FLOOR
PTF-7
NOT USED
PTF-8
PORCELAIN TILE, FLOOR
PTF-9
PORCELAIN TILE, FLOOR
PTF-10
PORCELAIN TILE, FLOOR
PTF-11
PORCELAIN TILE, FLOOR
PTF-12
PORCELAIN TILE, FLOOR
PTF-13
PORCELAIN TILE, FLOOR
PTF-14
PORCELAIN TILE, FLOOR
PTF-15
PORCELAIN TILE, FLOOR
PTF-16
PORCELAIN TILE, FLOOR
PTF-17
PORCELAIN TILE, FLOOR
PTF-18
PORCELAIN TILE, FLOOR
PTF-19
PORCELAIN TILE, FLOOR
PTF-20
PORCELAIN TILE, FLOOR
PTF-21
PORCELAIN TILE, FLOOR
PTF-22
PORCELAIN TILE, FLOOR
PTF-23
PORCELAIN TILE, FLOOR
PTF-24
PORCELAIN TILE, FLOOR
RSN-1
RESILIENT STAIR NOSING
SC
SEALED CONCRETE
UF-1
URETHANE FLOOR
VCT-1
VINYL COMPOSITION TILE
VCT-2
VINYL COMPOSITION TILE
VCT-3
VINYL COMPOSITION TILE
DIVISION 9 FINISHES - MISC.
GRT-1
GROUT
GRT-2
GROUT
GRT-3
GROUT
GRT-4
GROUT
GRT-5
GROUT
GRT-6
GROUT
TSP-1
TRANSITION STRIP PIECE
TSP-2
TRANSITION STRIP PIECE
TSP-3
TRANSITION STRIP PIECE
TSP-4
TRANSITION STRIP PIECE
TSP-5
TRANSITION STRIP PIECE
TSP-6
TRANSITION STRIP PIECE
DIVISION 9 FINISHES - WALL BASE
HDFB-1
HIGH DENSITY FIBERBOARD, BASE
PTB-1
PORCELAIN TILE, BASE
PTB-2
PORCELAIN TILE, BASE
PTB-3
PORCELAIN TILE, BASE
PTB-4
PORCELAIN TILE, BASE
PTB-5
PORCELAIN TILE, BASE
PTB-6
PORCELAIN TILE, BASE
RB-1
RUBBER BASE - 4" COVE
RB-2
RUBBER BASE - PROFILE SERIES
UB-1
URETHANE BASE, COVED
1
1
MANUFACTURER
Cascade Coil Drapery
MOZ
MOZ
MOZ
PATTERN NAME
COLOR NAME
3/8" - 15 Gauge Aluminum, 3% Fullness
Blendz Collection, Grain: Bamboo
Classic, Earth Collection, Grain: Waterfall
Classic, Neutral Collection, Grain: Linen
SIZE
Brite Pearl Gray
#312, Finish: Polycoat Gloss
Penny Copper, Ivory: Polycoat Gloss
Ivory, Finish: Polycoat Gloss
Twilight Zephyr
Desert Collection
Large Ovalesque
Terra Collection
Interlocking Rock Blocks, OHM
4' x 8' Sheet, .040 Thickness
4' x 8' Sheet, .040 Thickness
4' x 8' Sheet, .040 Thickness
136mm Overall, 96mm Center to Center
376mm Overall, 306mm Center to Center
64"L x 1" Thick x 2" High
Verify Panel Size with Millworker, 0.375"
Depth, 0.75" Thickness
48" x 96" Panel, 0.55" Depth, 0.75"
Thickness
COMMENTS
Bistro. Contact: Demi Hanes, Cascade Coil Drapery, 971-224-2188
Bistro Hood Surround. Grain to run vertically.
Demo Kitchen Hood Surround. Grain to run horizontally.
Cooking Suite
Work/Break Room, Demo Prep, Bake Shop, Admin Offices
Demo Kitchen, Bistro Bar
Demo Kitchen Refrigerators
Bistro Bar Face, Hostess Podium Face
Bistro
32"H x 24"W x 5-8"D max relief
Men's RR (Lobby)
Women's RR (Lobby)
Lobby - Demo Kitchen Wall
Lobby - Demo Kitchen Wall
Lobby - Demo Kitchen Wall
Lobby - Demo Kitchen Wall
Lobby - Demo Kitchen Wall
Lobby - Demo Kitchen Wall
Work/Break Room, Demo Prep, Demo Kitchen Cabinets
Work/Break Room, Demo Prep Countertops
Bistro Back Bar, Bake Shop Cabinets
Doors
Hostess Podium
Bistro, Bake Shop
Demo Kitchen
Bistro Entry Doors
Restrooms
Window Sill
Bistro
50" x 98.4'
Upper Lobby Glass
2' x 2' x 3/4"
2' x 2' x 3/4"
2' x 4' x 3/4"
4' x 4'
Back of House Corridors, Service, and Storage Areas
Corridor C-2
Administration Suite, High Ceilings @ Bistro
Conference
.365" Gauge
HORRY-GEORGETOWN
GRAND STRAND
CULINARY ARTS
BUILDING
CONSTRUCTION
MOZINGO + WALLACE
ARCHITECTS, LLC
618 CHESTNUT RD., STE. 205, M.B. , SC 29572
TEL. 843.449.8000
FAX 843.843.1113
admin@mozingowallace.com
3M
Fasara, Lattice g, JR451038913
USG
USG
USG
USG
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Sherwin Williams
Designtex
Olympia Micro Clima Plus Panels, SQ Edge, 4750 (minimum .60 NRC). Grid: Donn DX 26 HD 15/16" and Donn MS 274 2" Wall Molding
Eclipse Clima Plus Pedestals I Panels, PE/ILT Edge, 72015. Grid: Donn Centricitee DXT 26 HD and Donn MS 274 2" Shadow Molding
Eclipse Clima Plus Illusion Four/48 Panels, ILT Edge, 78011. Grid: Donn Centricitee DXT 26 HD and Donn MS 274 2" Shadow Molding
Panz Perforated Panel with 1/2", 6 lb. density fiberglass acoustic material. Perforation: A116. Grid: Fineline Edge with 9/16" Fineline 1/8" DXFF
Suspension and Donn MS274 2" Shadow Molding
Individual Subtle Textures with resin hardened spots on panel backs. Install w/ mfg's recommended piano wire
Halycon Clima Plus Planks, FL Edge, 98348 (minimum .95 NRC). Grid: Donn Identitee DXI26HRC HD with Double 1/8" Reveal and Donn MS274
2" Shadow Molding. Trim: Compasso Slim
Olympia Micro Clima Plus Panels, FLB Edge, 4754 (minimum .60 NRC). Grid: Donn Identitee DXI26HRC with Double 1/8" Reveal and Donn
MS274 2" Shadow Molding
Mars Clima Plus Healthcare Ceiling, SQ Edge, 86169. Grid: Donn ZXLA26 HD with miminum G60 Classification and Gordon WA 20 2" Aluminum
Angle Molding
Dryfall Paint
Dryfall Paint
Dryfall Paint
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
Painted - MPI Gloss Level 1
3M, Di-Noc Architectural Finish, Fine Wood
SW7003 Toque White
SW7018 Dovetail
SW7066 Gray Matters
SW7003 Toque White
SW7066 Gray Matters
SW7064 Passive
SW7016 Mindful Gray
SW7016 Mindful Gray
SW7101 Futon
SW7637 Oyster White
SW7671 On The Rocks
SW7657 Tinsmith
SW7056 Reserved White
FW-337
Milliken
Tandus
Tandus
Mats Inc.
Ceramic Technics
Ceramic Technics
Crossville
Crossville
Monuments and Shrines Collection, Design: Horseshoe
Iso 04536, Install with Powerbond Cushion Dryback, Adhesives for use on stairs: Taylor 1NC or Parabond M250
Angulate 04655
Entrance Matting, Calypso Tile
Ecco Stone Mineral
Ecco Stone Mineral
Structure
Structure
HS108 Ring-A-Ding
Wired 48201
Luminarie 22106
Anthracite
Mineral Gray, Honed
Mineral White, Honed
Gypsum AV221
Shale AV223
19.7" x 19.7" Tile
6' Wide
24" x 24" Tile
19 11/16" x 19 11/16" x 3/8" Thick
12" x 24" x 13/32"
12" x 24" 13/32"
24" x 24"
24" x 24"
Install: Monolithic. Administration Suite. Contact: Dawn Templeton, Milliken, 843-412-9256
Demo Auditorium
Install: Monolithic. Bistro.
Entry Vestibules
Grout: GRT-3. Men's RR. Contact: Pace Adams, Ceramic Technics, 770-740-0050
Grout: GRT-3. Women's RR. Contact: Pace Adams, Ceramic Technics, 770-740-0050
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Crossville
Structure
Sandstone AV222
24" x 24"
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Provenza
Daltile
Trinity Tile
Stonpeak
Trinity Tile
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Crossville
Johnsonite
W-age
Porcealto Graniti Series (Fine Grain)
Valley
Simply Modern Collection
Valley
Structure
Argent
Argent
Argent
Argent
Argent
Argent
Structure
Structure
Structure
Structure
Structure
Flexible Vinyl Stair Nosing, RCN-20-A
Marrow,Lucidato Finish
Pepe Grigio CD41
Camel
Simply Grey
Camel
Shale AV223
A1407 Water Vapors HON
A1407 Water Vaports HON
A1413 Under the Sea HON
A1413 Under the Sea HON
A1414 Carnegie Cool HON
A1414 Carnegie Cool HON
Sandstone AV222
Sandstone AV222
Gypsum AV221
Gypsum AV221
Shale AV223
20 Charcoal WG
24" x 24"
8" x 8"
12" x 24"
12" x 24"
8" x 48"
12" x 24"
12" x 24"
6" x 24"
12" x 24"
6" x 24"
12" x 24"
6" x 24"
12" x 24"
6" x 24"
12" x 24"
6" x 24"
6" x 24"
Verify with carpet thickness
Grout: GRT-5. Bistro. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-5. Bistro Cooking Suite. Contact: Cindy Bell, Daltile, 919-946-7519
Grout: GRT-5. Bistro, Break, Demo Prep, Demo Kitchen. Contact: Jason Beamer, Trinity Tile, 352-369-0444
Grout: GRT-3. BOH Restrooms
Grout: GRT-5. Bistro, Break, Demo Prep, Demo Kitchen. Contact: Jason Beamer, Trinity Tile, 352-369-0444
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Grout: GRT-2. Lobby. Contact: Tammy Weintraub, Palmetto Tile, 843-361-0839
Demo Auditorium
Stonhard
Armstrong
Armstrong
Armstrong
Stonshield UTS, Urethane
Imperial Texture Standard Excelon
Imperial Texture Standard Excelon
Imperial Texture Standard Excelon
Flagstone
51904 Sterling
51941 Polar White
51861 Soft Warm Gray
12" x 12"
12" x 12"
12" x 12"
Kitchens, Contact: Chuck Hatcher, Stonhard, 540-314-3360
General VCT
Corridor C-3, C-4
Corridor C-3, C-4
Laticrete
Laticrete
Laticrete
Laticrete
Laticrete
Laticrete
Schluter Systems
Schluter Systems
Schluter Systems
Johnsonite
Johnsonite
Johnsonite
Epoxy Grout
Unsanded Grout
Epoxy Grout
Epoxy Grout
Epoxy Grout
Epoxy Grout
Schluter - Jolly
Schluter - Schiene
Schluter - Reno U
Resilient Strip, CTA Adaptor
Resilient Strip, CRS Reducer
Resilient Strip, SSR Reducer
to match wall tile
24 Natural Gray
60 Dusty Gray
44 Bright White
24 Natural Grey
18 Sauterne
ATBG Brushed Nickel Anodized Aluminum
AE Satin Anodized Aluminum
AE Satin Anodized Aluminum
20 Charcoal
20 Charcoal
20 Charcoal
Verify profile with tile thickness
Verify profile with tile thickness
Verify profile with tile thickness
Verify profile with flooring thickness
Verify profile with flooring thickness
Verify profile with flooring thickness
Porcealto Graniti Series (Fine Grain)
Valley
Simply Modern Collection, Cove Base
Ecco Stone Mineral
Ecco Stone Mineral
W-age
4" Rubber Cove Base
Millwork Collection, Reveal 8"
Stonshield UTS, Urethane
Painted to Match Wall Color
Pepe Grigio CD41
Camel
Simply Grey
Mineral Gray, Honed
Mineral White, Honed
Marrow, Lucidato Finish
20 Charcoal WG
179 Steel WG
Flagstone
See Elevations
6" x 8" Cove Base
3" x 24" Bullnose
6" x 12" Cove Base
3" x 24" Bullnose
3" x 24" Bullnose
6" x 24"
4" high
8" high
6" high
Daltile
Trinity Tile
Stonepeak
Ceramic Technics
Ceramic Technics
Provenza
Johnsonite
Johnsonite
Stonhard
2
3
Ceiling Tile & Grid: White
Ceiling Tile & Grid: White
Ceiling Tile & Grid: White
Ceiling Tile: Wood Look, Grid: Silver Satin
Custom Colored Edges in Architect selected color of acoustically transparent paint 4' x 4' x 2"
Ceiling Tile, Grid & Trim: White
2' x 6' x 1"
Lobby Floating Ceiling Panels
Demo Auditorium
Ceiling Tile & Grid: White
2' x 2' x 3/4"
Bake Shop
Ceiling Tile & Grid: White
2' x 2' x 3/4"
Kitchens
LS3P ASSOCIATES LTD.
205 1/2 KING ST. CHARLESTON SC 29401
TEL. 843.577.4444
FAX 843.722.4789
WWW.LS3P.COM
Bistro
Demo Auditorium
General "White"
Conference
Demo Kitchen/Auditorium
Bistro
Bistro "Squares" Perimeter
Bistro "Squares"
Bistro "Squares"
Bistro "Squares"
Bistro "Squares"
Bistro "Squares"
Bistro Bar. Contact Jayne Hines, Designtex, 843.906.0801
Bistro Pizza Oven Surround
Lobby
Restroom Floors, BOH Restroom Walls, Kitchen Walls
Restroom Walls
Bistro
Demo Kitchen Walls
4
Carpet to Porcelain Tile Transition
VCT to Porcelain Tile Transition, Urethane Flooring to Porcelain Tile Transition
Carpet to VCT Transition
Carpet to Sealed Concrete Transition
VCT to Sealed Concrete Transition, Urethane Florring to Sealed Concrete Transition
COPYRIGHT 2013 ALL RIGHTS RESERVED
PRINTED OR ELECTRONIC DRAWINGS AND
DOCUMENTATION MAY NOT BE REPRODUCED
IN ANY FORM WITHOUT WRITTEN PERMISSION
FROM MOZINGO + WALLACE ARCHITECTS,
LLC AND LS3P ASSOCIATES LTD.
REVISIONS:
No.
Description
1
Bid Addendum #3
Date
03/06/15
OSE PROJECT #:
1202-130790
DATE:
OCTOBER 28, 2014
DRAWN BY:
KG
CHECKED BY:
RB
FINISH LEGEND
Grout: GRT-5. Cooking Suite
Break, Demo Prep
Grout: GRT-3. BOH Restrooms
Grout: GRT-3. Men's RR
Grout: GRT-3. Women's RR
Grout: GRT-5. Bistro
A-621
Demo Auditorium, Conference
Kitchens, Contact: Chuck Hatcher, Stonhard, 540-314-3360
5
MEMBERS OF THE AMERICAN INSTITUTE OF ARCHITECTS
SOLUTIONS THROUGH LISTENING
SERVICE BY DESIGN
6
CONSTRUCTION DOCUMENTS
ROOM FINISH SCHEDULE NOTES
ROOM FINISH SCHEDULE
NUMBER
E
101
102
103
104
105
106
107
110
111
112
113
114
115
116
117
118
120
121
122A
122B
122C
WALLS
ROOM
NAME
COOLER
COOLER
COOLER
ENTRY
ENTRY
ENTRY
RECEPTION
WORK/BREAK ROOM
BREAK
CONFERENCE
FACULTY
FACULTY
FACULTY
FACULTY
FACULTY
FACULTY
FACULTY
FACULTY
ADJUNCT
MEN
WOMEN
A/V CONTROL
ROOF ACCESS
DEMO KITCHEN
FLOOR
BASE
CEILING
NORTH
SOUTH
D
C
DEMO PREP
WOMEN
MEN
TEACHING KITCHEN 2
SECURE STORAGE
DISH
TEACHING KITCHEN 1
SECURE STORAGE
BAKING LAB 2
BAKING LAB 1
CHOCOLATE
BAKE SHOP
TEACH STORAGE
BEER/LIQUOR STORAGE
BISTRO
WEST
PROVIDE ELECTRIC OPERATED DRAPERY SYSTEM AT EXTERIOR WINDOWS (DPY-2).
PROVIDE MANUAL ROLLER SHADES AT EXTERIOR WINDOWS (SHD-1).
PROVIDE ELECTRIC OPERATED DRAPERY SYSTEM AT EXTERIOR WINDOWS (DPY-1).
ALL GLAZED WALL TILE TO BE INSTALLED FLOOR TO CEILING.
REFER TO TYPICAL ACCENT WALL ELEVATION D1 ON SHEET A-422. INSTALL STAINLESS
STEEL CORNER GUARDS AT ALL OUTSIDE CORNERS. REFER TO SPECS.
PORCELAIN WALL TILE TO BE INSTALLED FLOOR TO CEILING. REFER TO INTERIOR
ELEVATIONS FOR FURTHER INFORMATION.
MEN'S RESTROOM COUNTER TO BE SOLID SURFACE (SS-1), APRON: PLM-1.
NOT USED.
COUNTERTOP: PLM-10, CABINETS: PLM-9. HARDWARE: SEE INTERIOR ELEVATIONS.
WOMEN'S RESTROOM COUNTER TO BE SOLID SURFACE (SS-1), APRON: PLM-2.
COLUMNS IN DEMO AUDITORIUM TO BE PAINTED GFRG (PNT-8).
NOT USED.
INSTALL RESILIENT STAIR NOSING (RSN-1) ON ALL STAIRS IN DEMO AUDITORIUM.
COUNTERTOP: QSS-2, CABINETS: PLM-9. HARDWARE: CHW-2.
FIXED AUDIENCE SEATING LOCATED IN ROOM, FAS-1.
BAKE SHOP COUNTERTOP: QSS-1, CABINETS: PLM-11. HARDWARE: CHW-1.
BAR COUNTER FACE: MDFP-2, COUNTERTOP: QSS-1, CABINETS: PLM-11. HARDWARE:
CHW-2.
1.
2.
3.
4.
5.
NOTES
6.
CPT-4
CPT-4
CPT-4
CPT-1
CPT-1
PTF-10,12
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
CPT-1
PTF-1
PTF-2
CPT-2
SC
CPT-2, RSN-1, PTF-10,12
HDFB-1
HDFB-1
HDFB-1
RB-1
RB-1
PTB-2
RB-2
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
PTB-4
PTB-5
RB-1
RB-1
RB-2, PTF-12
GYP-1
GYP-1
GYP-1
GYP-1, EXP-1
GYP-1
ACT-IC
EXP-1, GYP-2, ACT-II
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC
ACT-IC, GYP-1
ACT-IC, GYP-1
ACT-IA
EXP-1
ACT-IV, VI, EXP-3, GYP-3
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-1, PTW-2
VWC-1, PTW-2, PNT-2
PNT-1
PNT-1
ATW-1,2,3,4, PNT-7,9
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-1, PTW-2, PNT-2
VWC-1, PTW-2
PNT-1
PNT-1
ATW-1,2,3,4, PNT-7,9
1
123
127
128
129
129B
130
132
132B
133
134
134B
137
138
139
140
EAST
PTF-10,12
PTF-2
PTF-1
UF-1
UF-1
UF-1
UF-1
UF-1
UF-1
UF-1
UF-1
VCT-1
VCT-1
VCT-1
PTF-3,8,10,12 CPT-3
PTB-2
PTB-5
PTB-4
UB-1
UB-1
UB-1
UB-1
UB-1
UB-1
UB-1
UB-1
RB-1
RB-1
RB-1
PTB-6
ACT-VI
ACT-IC, GYP-1
ACT-IC, GYP-1
ACT-VI
ACT-VI
ACT-VI
ACT-VI
ACT-VI
ACT-VI
ACT-VI
ACT-VI
ACT-V
ACT-IA
ACT-IA
GYP-1,4,5,7,6,8,9,10, EXP-2, ACT-IC
PNT-7
VWC-1, PTW-2
VWC-1, PTW-2
GTW-2,3
PNT-1
GTW-1
GTW-1
PNT-1
GTW-1
GTW-2,3
GTW-1
PNT-1
PNT-1
PNT-1
PNT-10, SSW-1
PNT-7
VWC-1, PTW-2
VWC-1, PTW-2
GTW-1
PNT-1
GTW-1
GTW-2,3
PNT-1
GTW-2,3
GTW-1
GTW-1
PNT-1
PNT-1
PNT-1
PNT-10, MDFP-2
140A
140B
140C
140D
141
WINE CLOSET
BAR STORAGE
BAR
WAIT STATION
COOKING SUITE
PTF-8
PTF-10,12
PTF-10,12
UF-1
PTF-9
HDFB-1
PTB-6
PTB-6
UB-1
PTB-1
GYP-1
ACT-IA
GYP-11, EXP-2
ACT-VI
ACT-VI, GYP-1
PNT-1
PNT-1
PNT-10
PNT-10, MDFP-2
142
143
143A
145
146
148
149
150
151
152
153
154
C-1
CHEF DINING
PRODUCTION KITCHEN
PROD. KIT. SUPPORT
MEN
WOMEN
RECYCLE
CHAIR & TABLE STORAGE
LOADING/ RECEIVING
CLEANING SUPPLIES
CAMPUS STORAGE
CENTRAL STORAGE
SECURE STORAGE
LOBBY
PTB-6
UB-1
UB-1
PTB-3
PTB-3
RB-1
RB-1
UB-1
RB-1
RB-1
UB-1
REB-1
HDFB-1
GYP-4, ACT-IC
ACT-VI, EXP-1
ACT-VI
ACT-IA
ACT-IA
ACT-IA
EXP-1
ACT-IA
EXP-1
EXP-1
ACT-IA
EXP-1
GYP-1, EXP-1, ACT-III
PNT-10
FRP-1
PNT-1
PTW-3,4, PNT-2
PTW-3,4, PNT-2
PNT-1
PNT-1
PNT-13, FRP-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
C-2
C-3
C-4
C-5
D-1
D-2
E-1
J-1
M-1
M-2
CORRIDOR
CORRIDOR
CORRIDOR
CORRIDOR
TELECOM/ DATA
TELECOM/ DATA
ELECTRICAL
JANITOR
MECHANICAL
MECHANICAL
CPT-3
UF-1
UF-1
PTF-11
PTF-11
VCT-1,2,3
VCT-1
SC
VCT-1
SC
UF-1
SC
PTF-3,4,6,13,14,15,16,17,18,19,20,21,
22,23,24
PTF-4,13
VCT-1,2,3
VCT-1,2,3
CPT-1
VCT-1
VCT-1
VCT-1
SC
SC
SC
PNT-1
PNT-1
AWF-1
PNT-10
STAINLESS STEEL,
PTW-1
PNT-10
FRP-1
PNT-1
PTW-3,4, PNT-2
PTW-3,4, PNT-2
PNT-1
PNT-1
PNT-13, FRP-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1, PLM-3,4,5,6,7,8
HDFB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
RB-1
ACT-IB
ACT-IA
ACT-IA
GYP-1, EXP-1
EXP-1
ACT-IA
EXP-1
EXP-1
EXP-1
EXP-1
PNT-1, VWC-3,8
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
FRP-1
PNT-1
PNT-1
PNT-1,3,4,5
PNT-1
PNT-6, VWC-8
PNT-1
PNT-1
PNT-1
PNT-1
FRP-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-2, PNT-1
PNT-1
VWC-2, PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-1
VWC-1
PNT-1
PNT-1
PLM-9, GTW-4,5, PNT-9,
SFW-2
1
PNT-7
VWC-1
VWC-1, PTW-2
GTW-1
PNT-1
GTW-1
GTW-1
PNT-1
GTW-1
GTW-1
GTW-1
PNT-1
PNT-1
PNT-1
PNT-10, PTW-1
PNT-1
PNT-10
STAINLESS STEEL,
PNT-10
PNT-10, MDFP-2
FRP-1
PNT-1
PTW-3,4, PNT-2
PTW-3,4, PNT-2
PNT-1
PNT-1
PNT-13
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1, VWC-3,4,5,6,7,
WF-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
FRP-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-2, PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
VWC-1, PNT-2
VWC-1, PNT-2
PNT-1
PNT-1
PNT-9
PNT-7
VWC-1
VWC-1
GTW-1
PNT-1
GTW-1
GTW-1
PNT-1
GTW-1
GTW-1
GTW-1
PNT-1
PNT-1
PNT-1
PNT-10, MDFP-2,
MDPY-1
PNT-1
MDFP-2
PNT-10
FRP-1
PNT-1
PTW-3,4, PNT-2
PTW-3,4, PNT-2
PNT-1
PNT-1
PNT-13, FRP-1
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1,10,11,12, VWC-8
PNT-1
PNT-6
PNT-1
PNT-1
PNT-1
PNT-1
PNT-1
FRP-1
PNT-1
PNT-1
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
NOTE 2,9
NOTE 9
NOTE 3
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2,9
NOTE 2
NOTE 6,7
NOTE 6,10
HORRY-GEORGETOWN
GRAND STRAND
CULINARY ARTS
BUILDING
CONSTRUCTION
MOZINGO + WALLACE
ARCHITECTS, LLC
618 CHESTNUT RD., STE. 205, M.B. , SC 29572
HOOD SURROUND: MET-2. REFER TO INTERIOR ELEVATIONS. NOTE 1,11,13,14,15
TEL. 843.449.8000
FAX 843.843.1113
admin@mozingowallace.com
NOTE 9
NOTE 6,10
NOTE 6,7
NOTE 4,5
NOTE 4
NOTE 4,5
NOTE 4,5
NOTE 4,5
NOTE 4
NOTE 16
LS3P ASSOCIATES LTD.
REFER TO INTERIOR ELEVATIONS.
205 1/2 KING ST. CHARLESTON SC 29401
TEL. 843.577.4444
FAX 843.722.4789
WWW.LS3P.COM
REFER TO INTERIOR ELEVATIONS. NOTE 17
HOOD SURROUND: MET-1. COUNTER FACES: MDFP-1, MET-3
INSTALL FRP-1 PANELS BEHIND RECYCLE BINS.
INSTALL FRP PANELS AROUND WASH AREA.
REFER TO INTERIOR ELEVATIONS ON SHEET A-421. WINDOW SILLS: SS-2.
INSTALL FRP-1 ON ALL WALLS FLOOR TO CEILING.
MEMBERS OF THE AMERICAN INSTITUTE OF ARCHITECTS
COPYRIGHT 2013 ALL RIGHTS RESERVED
PRINTED OR ELECTRONIC DRAWINGS AND
DOCUMENTATION MAY NOT BE REPRODUCED
IN ANY FORM WITHOUT WRITTEN PERMISSION
FROM MOZINGO + WALLACE ARCHITECTS,
LLC AND LS3P ASSOCIATES LTD.
REVISIONS:
B
No.
Description
1
A
OSE PROJECT #:
1202-130790
03/06/15
REFER TO FINISH LEGEND AND SCHEDULE FOR MATERIAL DESIGNATIONS. NOTE
ROOM ASSIGNMENT WITH EACH FINISH IN SCHEDULE.
DATE:
OCTOBER 28, 2014
DRAWN BY:
KG
B.
REFER TO SHEET A-603 FOR FLOOR TRANSITION/ THRESHOLD DETAILS.
CHECKED BY:
RB
C.
INTERIOR FINISHES TO WRAP ALL WALLS WITHIN PARAMETERS OF ARROWS.
D.
REFER TO INTERIOR ELEVATIONS WHERE PROVIDED FOR ADDITIONAL FINISH
INFORMATION.
E.
REFER TO REFLECTED CEILING PLANS ON SHEETS A-121 THROUGH A-123 AND
ROOM FINISH SCHEDULE FOR CEILING FINISHES.
F.
FLOOR FINISHES SHALL EXTEND UNDER BUILT-IN COUNTERS AND EQUIPMENT.
G.
ALL FLOORING TRANSITIONS AND SEAMS AT A DOOR SHALL OCCUR DIRECTLY
UNDER THE CENTERLINE OF CLOSED DOOR U.N.O.
H.
ALL TILE PATTERNS SHALL BE CENTERED ON WALL AND/OR FLOOR TO ALLOW
THE LARGEST SIZE CUT PIECE AT EDGES AS POSSIBLE.
J.
METAL TRANSITION STRIPS ARE REQUIRED AT ALL INSTANCES WHERE GROUT
COLOR CHANGES IN TILE FLOORING.
K.
FACTORY FINISH ALL EXPOSED METAL SURFACES (ie. GRILLES, HEATING UNITS,
ELECTRICAL PANELS, SPRINKLER HEADS) TO MATCH ADJACENT SURFACE IN ALL
PUBLICLY VIEWED AREAS.
L.
ALL HOLLOW METAL DOOR FRAMES TO BE PAINTED PNT-14 U.N.O.
A.
3/5/2015 5:09:42 PM
C:\Users\kellygilreath\Documents\HGTC Culinary - INTERIOR_2013_kellygilreath.rvt
GENERAL FINISH NOTES
Bid Addendum #3
Date
ROOM FINISH
SCHEDULE
A-623
SOLUTIONS THROUGH LISTENING
SERVICE BY DESIGN
1
2
3
4
5
6
CONSTRUCTION DOCUMENTS
Download