See Our NEW
PRODUCTS
Inside
Loading Dock Lights
Trailer Stands and
Dock Accessories
Overhead Door Track Guards
Save-T Protection Products
Protection Devices & Dock Plates
Save-T COLUMN PROTECTORS
Save-T Column Protectors are the perfect solution for protecting
warehouse and factory columns, posts, and beams. These high density polyethylene protectors absorb impact and prevent damage and
repair charges to columns, forklifts, equipment, and personnel. They
can be installed in just seconds. Two halves attach together with
easy-to-use Velcro straps and require no tools. Each column protector is maintenance free, light weight, and UV protected. Other highvisibility colors are available.
T1706
Product No.
Description
Wt.
T1704
Narrow Protector for 4''- 6'' Column
16 lbs.
T1706
Protector for 6'' Column
40 lbs.
T1708
Protector for 8'' Column
40 lbs.
T1710
Protector for 10'' Column
40 lbs.
T1712
Protector for 12'' Column
40 lbs.
Save-T WALL PROTECTORS
T1726
Save-T Wall Protectors are a simple solution for preventing damage
to walls in areas with forklift, hand truck, or drum traffic. Each high
density polyethylene protector is impact resistant, light weight, and
resistant to cracking and chipping. (Anchors not provided).
Product No.
Description
Wt.
T1726
6'' Wall Protector (Set of 2)
8 lbs.
T1728
10'' Wall Protector (Set of 2)
14 lbs.
Save-T CORNER PROTECTORS
Save-T Corner Protectors deflect impact and protect plant areas
prone to damage by forklift, hand truck, or personnel traffic. They
can be mounted to protect racks or overhead door frames. Each
lightweight corner protector is UV stabilized.
Product No.
Description
Wt.
T1720
21'' Corner Protector (Set of 2)
10 lbs.
T1725
42'' Corner Protector (Set of 2)
20 lbs.
Save-T PORTABLE POLY DOCK PLATE
T1720
The Save-T Portable Poly Dock Plate is designed for use with two
and four wheeled dollies, hand trucks, and carts. Its light, durable
ergonomic design and raised non-slip surface makes it easy to handle and use. Maximum load capacity is 750 lbs.
Product No.
T1795
Description
Wt.
Portable Poly Dock Plate - 35'' W x 36''L x 5''H 30 lbs.
T1795CR Shipping Container Ramp - 35'' W x 36''L x 6''H
25 lbs.
Save-T PORTABLE POLY CURB RAMP (Not Shown)
TMI’s Save-T Curb Ramp is primarily used with hand trucks or carts.
Its lightweight, durable design makes this the perfect product for
delivery trucks. Maximum load capacity is 1000 lbs.
T1795
Product No.
T1784
2
Description
Poly Curb Ramp - 27'' W x 27''L x 4''H
Wt.
9 lbs.
Cabinets, Containment Platforms & Waste Cans
Save-T STORAGE CABINETS
Save-T Storage Cabinets are the perfect solution for storing flammables,
acids, pesticides, chemicals, and other liquids. Safety Cabinets are made of
18 gauge steel and are designed to protect contained flammable liquids for
a period of 10 minutes, giving employees time to exit a building in case of a
fire. Each cabinet has adjustable shelves to accommodate various container
sizes. Save-T Storage Cabinets meet NFPA Code 30 and OSHA specifications. Additional sizes are available.
Product No.
Description
Wt.
T1930
1 Door, Sliding Self Closing Storage Cabinet - 30 Gallons
253 lbs.
T1947
2 Door, Manual Close Storage Cabinet - 45 Gallons
342 lbs.
T3010
2 Door, Self Closing Storage Cabinet - 30 Gallons
257 lbs.
T4510
2 Door, Self Closing Storage Cabinet - 45 Gallons
353 lbs.
T1915
Manual Shelf for 15, 30, 45 Gallon Cabinets
12 lbs.
T1947
All steel cabinets meet NFPA Code 30 and OSHA specifications.
Self-closing models meet Uniform Fire Code and NFPA Code One requirements.
Save-T SPILL CONTAINMENT PLATFORMS
Save-T Spill Containment Platforms are the most flexible solutions for
spill protection, containment, and storage of hazardous products on the
market. Each platform is made of polyethylene for excellent chemical
resistance. Platforms are low profile and can easily be moved with a
pallet jack or fork lift. Compared to other spill containment platforms on
the market, this design is the easiest and most affordable. Modular
platforms meet EPA 40 CFR 264.175.
Product No.
Description
T1631
Wt.
T1631
2 Drum Budget Basin - 34 Gallons
28 lbs.
T1632*
2 Drum Modular Platform - 30 Gallons
32 lbs.
T1645*
4 Drum Pallet - 66 Gallons
65 lbs.
T1686*
6 Drum Pallet - 88 Gallons
T1683
IBC Unit with Poly Platform - 400 Gallons
T1613
Drum Bogie - 1250 lbs Load Capacity - 5 Casters
T1660
Drum Funnel
T1613
88 lbs.
250 lbs.
24 lbs.
7 lbs.
* EPA 40 CFR 264.175: Container storage areas must have a containment
system that has sufficient capacity to contain 10% of the volume of
containers or the volume of the largest container, whichever is greater.
T1683
Save-T POLY WASTE CANS
For additional sizes
please contact TMI
Save-T Poly Waste Cans provide temporary storage of solvents, waste
rags, shavings, and other materials subject to spontaneous combustion.
Save-T Waste Cans are chemically resistant to most compounds and will
not rust. Cans have a self-closing lid with foot lever. Each Poly Waste Can
is FM approved. Yellow and red are available.
Product No.
Description
Wt.
T937FLY
Poly Waste Can - 14 Gallons - 22'' x 18'' x 21''
16 lbs.
T935FLY
Poly Waste Can - 10 Gallons - 22'' x 18'' x 18''
14 lbs.
T933FLY
Poly Waste Can - 6 Gallons - 16.5'' x 13.5'' x 16''
9 lbs.
T937
T935
T933
3
3
Parking Blocks, Speed Bumps & Post Guards
Save-T PARKING BLOCKS and SPEED BUMPS
Save-T Parking Blocks are made of rugged, high density polyethylene.
They are flexible enough to fit parking lot contours, are light weight,
affordable, and will never need painted. Colors available include yellow,
gray, blue, and black with yellow stripes. TMI's Save-T Speed Bumps
feature a non-skid surface and are also weather and chemical resistant.
These high visibility yellow bumps are load tested to 20,000 lbs. per
pneumatic tire. Mounting hardware is included.
Product No.
Parking Block
Cut-Away
Description
Wt.
T1790Y
HDPE Parking Block - 4''H x 8''W x 72''L
Yellow, Gray, Blue, Black
15 lbs.
T1792
HDPE Speed Bump - Cable Guard - Yellow - 6' Long 15 lbs.
T1793
HDPE Speed Bump - Cable Guard - Yellow - 9' Long 25 lbs.
T1790KIT HDPE Anchor Kit for Parking Stops (3 Anchors)
3 lbs.
T1792KIT HDPE Anchor Kit for Speed Bumps (6 Anchors)
8 lbs.
Save-T SOLID RECYCLED PLASTIC PARKING BLOCK
and SPEED BUMPS
These solid parking blocks are virtually indestructible and maintenance free.
These products carry a lifetime warranty against breakage, chipping, or cracking. Mounting hardware is included.
Product No.
Description
Wt.
SPB-4-6-72
Solid Standard Parking Block - 4''H x 6''W x 72''L
30 lbs.
DLP-4.5-6-72
Solid Deluxe Parking Block - 4.5''H x 6''W x 72''L
36 lbs.
TPB-7-10- 96
Solid Truck Parking Block - 7''H x 10''W x 96''L
80 lbs.
SSB-2-10-72
Solid Standard Speed Bump - 2''H x 10''W x 72''L
25 lbs.
Save-T BOLLARD POSTS and MACHINE GUARDS
Save-T Bollard Posts are simple solutions for adding protection to your facility
and preventing damage to doorways, racking, or corners. Posts feature a
durable, yellow, powder-coated lead-free paint. Each post is made of 1/2" thick
steel mounted on a 3/8" steel plate. Post caps are included and can be
removed for filling. TMI's Save-T Machine Guards provide protection for facilities and equipment. Made of heavy duty steel, machine guards create barriers
between traffic areas and valuable machinery, saving money on costly repairs.
Product
No.
BOLLARDS and MACHINE GUARDS
Description
Description
T1742
T1743
T1744
T1749
4''
4''
4''
4''
Dia.
Dia.
Dia.
Dia.
Bollard Post - 24''H
Bollard Post - 36''H
Bollard Post - 42''H
Post Cap
T1759 5'' Sq. Post Cap
T1755
T1756
T1757
T1758
5''
5''
5''
5''
Dia.
Dia.
Dia.
Dia.
Bollard Post - 24''H
Bollard Post - 36''H
Bollard Post - 42''H
Post Cap
T1746
T1770
T1774
T1775
T1752 5'' Sq. Bollard Post - 24''H
T1753 5'' Sq. Bollard Post - 36''H
T1754 5'' Sq. Bollard Post - 42'H
4
Product
No.
T1763 6'' Dia. Bollard Post - 36''H
T1764 6'' Dia. Bollard Post - 42''H
T1769 6'' Dia. Post Cap
4''
4''
4''
4''
Machine
Machine
Machine
Machine
Guard - 24''H x 36''W
Guard- 24''H x 48''W
Guard- 36''H x 36''W
Guard- 36''H x 48''W
T1771 4'' Machine Guard- 42''H x 36''W
T1747 4'' Machine Guard- 42''H x 48''W
Bumpers, Wheel Chocks & Post Sleeves
Save-T LAMINATED RUBBER BUMPERS
Laminated Bumpers are constructed of recycled truck tire pads compressed
between steel angles and secured with 3/4" steel tie rods. Laminated bumpers,
the most common style, protect both trucks and docks. Our complete line
includes all sizes from 4-1/2" to 12" thick in horizontal, vertical, extra-length, and
extra-thick styles. Gussets for lower loading docks and special sizes are also
available.
LAMINATED
Save-T STEEL FACED BUMPERS
Steel Faced Bumpers with a 3/8" thick steel front plate should be used where
maximum protection is desired. They will absorb more shock and abrasion than
standard laminated bumpers, and absorb the constant height adjustment of air
ride trailers. Standard sizes are 4-1/4" to 12-3/4" thick in standard design and
sizes. Gussets for lower loading docks and special sizes are also available.
Steel Faced Bumpers last as much as 5 times longer than standard laminated
bumpers, offering the lowest cost of ownership.
STEEL
FACED
Save-T MOLDED RUBBER BUMPERS
Molded Dock Bumpers are manufactured using reinforced rubber in a variety of
shapes and sizes. These solid, durable, one piece bumpers are smooth, attractive, and will not harden or be affected by weather. The most popular models are
the "T", "L", and "R" styles. We carry a full line of standard sizes.
MOLDED
Save-T EXTRUDED BUMPERS
When wall protection from forklifts and other loading dock equipment is needed,
Extruded Bumpers are the ideal solution. This type of bumper is also great for
indoor parking areas and marinas. They are available in any length up to ten feet
and can have holes pre-drilled at the factory. Common styles include the "D" and
"E" shapes.
EXTRUDED
Save-T WHEEL CHOCKS
TMI, LLC carries an entire line of wheel chocks, including laminated rubber, molded
rubber, urethane, and aluminum. Wheel chocks can be purchased with standard
chain lengths of 10’, 12’, and 15’. Safety security signs are also available.
WHEEL CHOCKS
OSHA Regulation 1910.78(M) - Wheel chocks must be used in addition
to a trailer stand while trailer is docked.
Save-T BUMPER POST SLEEVES
Save-T Post Sleeves make old, unattractive bollards look new again. These
sleeves save money by eliminating maintenance and repair costs due to chipping,
rusting, cracking, or discoloration. Post sleeves are available in 2 types: smooth
and ribbed. They fit 4", 6", and 8" posts. Each sleeve is 56" long and can be easily
trimmed to fit existing posts. Yellow is our standard. Additional colors are available.
Product No.
T1732
T1732BASE
T1730
T1730BASE
T1735
T1736
T1737
Description
Sleeve for 4'' Round Bumper Post - Yellow
Base for 4'' Round Bumper Post Sleeve
Sleeve for 6'' Round Bumper Post - Yellow
Base for 4'' Round Bumper Post Sleeve
Sleeve for 4'' Round Bumper Post - Yellow
Sleeve for 6'' Round Bumper Post - Yellow
Sleeve for 8'' Round Bumper Post - Yellow
Ribbed
Ribbed
Smooth
Smooth
Smooth
Wt.
4 lbs.
2 lbs.
6 lbs.
2 lbs.
4 lbs.
6 lbs.
8 lbs.
5
3
Trailer Stands and Door Track Guards
TMI’s Save-T Trailer Stands are essential for loading dock safety. The Auto-Riser
will prevent a spotted trailer’s landing gear from collapsing. The Ratchet-Riser
will also help reposition a trailer after an accident with 40,000 lbs. of lifting
capacity.
AUTO-RISER
Save-T AUTO-RISER TRAILER STANDS
• Exclusive gas-activated leveling system with security pin
• 100,000 lbs static load capacity
• Height adjustable from 42" to 52.5"
• 5" x 30" support pad
• Extra large 17" x 18.5" base
• 10" semi-pneumatic rubber tires
• Only one required per trailer
• Weight - 150 lbs.
• One year limited warranty
Save-T RATCHET-RISER TRAILER STANDS
•
•
•
•
•
•
•
•
•
RATCHET-RISER
38" ratcheting/positioning handle
100,000 lbs static load capacity
40,000 lbs lifting capacity
Height adjustable from 39.5" to 51"
Large circular base
10" semi-pneumatic rubber tires
Two recommended per trailer
Weight - 105 lbs.
One year limited warranty
OSHA regulations suggest that trailer stands may prevent the upending of
trailers during loading or unloading when the trailer is not attached to a
tractor or converter dolly.
Save-T OVERHEAD DOOR TRACK GUARDS
Overhead Door Track Guards are made of heavy-duty 7 gauge steel. They
wrap around the door tracks to absorb impact from forklifts and other vehicles, drastically reducing down time and repair costs. Track guards bolt to
the floor and the wall for firm attachment.
•
•
•
•
•
•
6
Wraps around door track without interfering with door operation
45 Degree angle flange adds strength and protects from side impact
1/4" thick floor plate drilled for three 1/2'' anchors
3/16" thick wall flange drilled for three 1/2'' anchors
7-1/4" projection
Stocked in 36", and 48" sections
Dock Lights and Stop & Go Lights
Save-T FLEX DOCKLITE ® - NEW !
DLP-FLEX-INC
The Phoenix FLEX Docklite is ideal for illuminating truck trailers. Its sleek profile
and compact design minimize potential damage from unintended impact. When
impact occurs, the flexible arm and hinged bracket allow the fixture to swing easily
out of the way. The head is made of heat-resistant polymer that is cool-to-the-touch
and can accommodate incandescent lamps up to 150 watts.
Overall Length: 42"; Head Diameter: 6"; Weight: 8 lbs
Save-T POLYMER DOCKLITE ® HEADS
The Polymer Docklite Head is a cool-to-the-touch head that can easily replace
existing incandescent metal light heads. The polymer head has a heat shield that
deflects and dissipates heat and prevents denting.
Head Diameter: 8"; Compatible with standard Phoenix arms
Save-T FLUORESCENT DOCKLITE ® HEADS - Energy Savings
DLP-INC-LH
The self-ballasted compact fluorescent light head uses less energy than standard
incandescent lamps, allowing for up to 75% energy savings each year. This light
head is cool-to-the-touch and impact resistant for added safety on loading docks.
These lights can replace existing incandescent light heads. Energy savings rebates
may be available! Head Diameter: 8"; Compatible with standard Phoenix arms
Phoenix Modular Dock Light Heads
Product No.
Description
DLP-40SBFL-LH
DL-INC-LH
Incandescent Light Head
DL-50HPS-LH
50 Watt High Pressure Sodium (Available up to 100 Watts)
DL-50MH-LH
50 Watt Metal Halide (Available up to 100 Watts)
DL-500QH-LH
500 Watt Quartz Halogen
Phoenix Modular Dock Light Arms
Product No.
Description
DL-24-ARM
Single Strut 24'' Arm
DL-42-ARM-DS Double Strut 42'' Arm
DL-42-ARM
Single Strut 42'' Arm
DL-60-ARM-DS Double Strut 60'' Arm
DL-60-ARM
Single Strut 60'' Arm
DL-42-ARM-SP Spring Arm 42''
Product No.
Description
Fans, Explosion Proof, Weather Tight, and Impact Resistant Lights Available –
Call 800-888-9750 for information
Save-T POLYCARBONATE DOCK LIGHTS
The Tri-Lite DL40-P is a 40'' Double Strut Arm with a Polycarbonate
Light Head. This model is perfect for new construction when quality is
needed at an affordable price. The polycarbonate head is cool-to-thetouch and very durable. Single strut arm and metal head available.
DL40-P
Save-T STOP & GO COMMUNICATION LIGHTS
Reduce Accidents and Injuries!
Tri-Lite Stop & Go Lights alert truck drivers and loading dock personnel to
the safety status of docked or docking trucks. When the truck backs up to
the dock, the light flashes green. Once the truck reaches the dock and is
safely locked into place, a signal is sent to the Stop and Go Light. The light
changes to a flashing red light, communicating to the driver that the truck is
safely docked. These are available in Incandescent, LED, and Low Voltage
light types.
SG10/20/30
3
7
Other
Products
Air Doors are engineered to create an invisible wall that separates environments. Not only
do they stabilize work area temperatures, but
they save on expensive energy costs.
Air Doors provide year round comfort for
customers and employees. Our Industrial
Air Doors are used for both interior or exterior doorways at plants and warehouses.
All Commercial and Industrial Series Air Doors
have heating options. Electric heaters are the
most popular. Steam, hot water and gas-fired
units are available.
Industrial Curtains & Enclosures
Softwall partitions are the most inexpensive
solution to contain environmental problems
such as dust, smoke, humidity, adverse temperatures and noise. Our Pipe Staff design
adds stability and security with “lock-up” cane
bolts and “lock-down” wall brackets.
Weld Screens are free-standing and custom
made to your specifications. The PVC
Screens have heat-sealed hems on all four
sides using an electronic welding process.
Grommets are placed at 12" centers to eliminate ripping and tearing. Frames consist of
7⁄8"
galvanized square tubing. Heavy-duty
square tube legs eliminate excess sway and
wobble. Available in transparent or opaque
PVC.
5350 Campbells Run Road
Pittsburgh, PA 15205-9738
800-888-9750
Tel: 412-787-9750
Fax: 412-787-3665
Web: www.tmi-pvc.com
E-Mail: customer-service@tmi-pvc.com
Copyright © 2008
Catalog Number LDA-07-08