323
COLLINS CLASSROOM CENTER
TECH SUPPORT
Help Desk: x4357
For priority support, please use the
classroom phone.
NOTES
At the end of class:
Turn off the projector.
Log off the teaching station.
Turn off the room lights.
PLEASE LEAVE THIS MANUAL ON THE
COUNTERTOP OF THE INSTRUCTOR’S STATION
Collins Classroom Center
THIS ROOM IS EQUIPPED WITH:
COMPUTER
VIDEO
AUDIO
PC
Video Projector
Wall Speakers
Laptop Connection
Document Camera
Projector Controlled
Audio System
Wireless Presenter
1
323
323
EQUIPMENT
OVERVIEW
Panasonic PT-LZ370
Projector
To use the projector:
1.
Make sure both the projector and the needed video
device (Computer, VCR, DVD, etc.) are turned ON.
2.
Use the corresponding input button on the
projector’s remote to activate the video input line for
the video device.
Devices are generally selected by pressing the corresponding input button.
Below is the input configuration for this room. In a few classrooms, additional
steps are needed to get some of the video devices to display on the
projector. A detailed explanation of how to operate each device is given in the
following sections of this manual.
Input Buttons
INPUT CONFIGURATION:
Projector Remote
2
PROJECTOR
HDMI 1 (6) - PC
HDMI 2 (6) - Guest Device
Computer (1) - Document Cam
Projector Controlled
Audio System
All audio in the Projector Controlled Audio System is adjusted
directly through the volume button on the projector’s remote.
Additionally, the remote‘s AV Mute button can be used to
silence the audio and simultaneously black the screen.
AV Mute Button
Projector Remote
3
AUDIO SYSTEM
Volume Button
Samsung SDP-860
Document Camera
1.)
Make sure the document camera and the projector are
turned ON.
2.)
Use the corrosponding input buttons on the projector’s
remote to select the document camera as the video
source.
4
DOCUMENT CAMERA
To use the document camera:
Windows Media
DVD Player
While this room is not equi pped with a dedicated DVD player, DVDs can be
played through the PC’s DVD drive.
To play a DVD:
1.)
Make sure the PC, projector, and receiver are turned ON.
2.)
Use the corrosponding input button on the projector remote select
the computer as the video source.
3.)
Insert your DVD into the PC’s DVD drive.
4.)
If video playback software does not automatically open,
launch Windows Media Player from the application menu.
5.)
To play media in fullscreen mode, press ALT + ENTER or click on
the fullscreen toggle in the bottom right corner of the window. To
exit fullscreen mode, press ESC.
5
DVD
Fullscreen Toggle
HP
Computer
To use the computer:
1.)
LOGON to the computer using your UWSP username and password.
2.)
To display the computer’s screen on the projector, turn the
projector on using the POWER button on the remote. Then press the
corresponding input button on the projector remote to choose the PC
as the video source (see the “PROJECTOR” page).
Unlocking a computer:
If the PC’s screen indicates that it has been locked by another user, you can
unlock the system by restarting it. To restart a locked computer:
1.)
Press and hold the POWER button on the computer until it shuts
down (typically, you will need to hold the button for 5 to 10 seconds
before the sequence will begin).
2.)
Press the power button again to restart the PC. When the login screen
appears, enter your UWSP username and password.
NOTE TO USERS:
6
COMPUTER
Please remember to logoff the computer when finished. After 60 minutes of
inactivity, classroom computers will automatically lock, preventing subsequent
users from logging on. If a computer has accidentally been left locked by another
user, please see the section on “Unlocking a Computer” above.
HDMI & DisplayPort
Guest Device Connection
To connect a mobile device:
1.)
HDMI - Disconnect the DisplayPort adapter from the HDMI cable (if
connected) and connect your mobile device to the provided HDMI
cable.
DisplayPort - Connect your mobile device to the provided DisplayPort
adapter and then connect the DisplayPort adapter to the provided
HDMI cable.
● If your device does not have a DisplayPort or HDMI connection, contact Tech Support for further
assistance.
● Some devices have proprietary, mini, or micro connections and will require an additional adapter to connect to
the room’s AV system.
● Also, some devices require proper configuration to utilize an external display. To configure your device
accordingly, please refer to the instructions provided by your manufacturer.
2.)
Use the corresponding input buttons on the projector remote to
select the guest device as the video source.
● When the correct projector input is selected while the guest device is connected, the AV system will
automaticly switch from the comptuer to the guest device.
HDMI Cable
DisplayPort Adapter
7
GUEST DEVICES
Wireless internet connections are also available in most classrooms. For
instructions on configuring your device, contact Help Desk at x4375 or visit
www.uwsp.edu/IT/Network/Wireless.
COLLINS
CLASSROOM
CENTER
323
TECHNOLOGY PROBLEMS
For issues related to technical services, please consult the
technical support information found on the front cover.
At the end of class:
At the end of class:
SEE FRONT
MAINTENANCE EMERGENCIES
x4219
During the hours of 7 AM - 3:30 PM, issues related to building
maintenance may be directed to Facility Services. During off-hours,
maintenance emergencies may be reported to Protective Services.
FACILITY SERVICES
SECURITY CONCERNS
x3456
For issues related to building or campus security, please contact
Campus Protective Services.
CAMPUS PROTECTIVE
SERVICES
POLICE/FIRE EMERGENCIES
9-911
SPPD/SPFD
NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up.
EXIT
EXIT
323
EXIT
THIRD FLOOR
EXIT