Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com

advertisement
Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC-C033
v03.0711
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER MODULE, 24 - 33 GHz OUTPUT
Features
High Output Power: +17 dBm
Frequency Multipliers
4
Low Input Power Drive: 0 to +6 dBm
Typical Applications
100 KHz SSB Phase Noise: -132 dBc/Hz
The HMC-C033 is suitable for:
• Clock Generation Applications:
SONET OC-192 & SDH STM-64
Single Supply: +5V @ 81 mA
Hermetically Sealed Module
• Point-to-Point & VSAT Radios
Field Replaceable 2.92mm Connectors
• Military EW/Radar
-55 °C to +85 °C Operating Temperature
• Space
General Description
Functional Diagram
The HMC-C033 is a x2 active broadband frequency
multiplier utilizing GaAs PHEMT technology in a
miniature hermetic module. When driven by a 3 dBm
signal, the multiplier provides +17 dBm typical output
power from 24 to 33 GHz. The Fo and 3Fo isolations
are >20 dBc and >30 dBc respectively at 28 GHz with
respect to output signal level. This frequency multiplier
features DC blocked I/O’s, and is ideal for use in LO
multiplier chains for Pt to Pt & VSAT Radios yielding
reduced parts count vs. traditional approaches. The
low additive SSB Phase Noise of -132 dBc/Hz at
100 kHz offset helps maintain good system noise
performance.
Electrical Specifications, TA = +25° C, Vdc = +5V, 3 dBm Drive Level
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Output Power
14
Max.
Units
GHz
24 - 33
GHz
17
dBm
Fo Isolation (with respect to output level)
20
dBc
3Fo Isolation (with respect to output level)
30
dBc
Input Return Loss
13
dB
Output Return Loss
SSB Phase Noise (100 kHz Offset)
Supply Current
4-1
Typ.
12 - 16.5
20
dB
-132
dBc/Hz
81
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C033
v03.0711
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER MODULE, 24 - 33 GHz OUTPUT
Output Power vs.
Temperature @ 3 dBm Drive Level
Output Power vs. Drive Level
20
20
15
10
+25C
+85C
-55C
5
10
5
0
-5
-15
0
4
-2 dBm
0 dBm
2 dBm
4 dBm
6 dBm
-10
-20
22
23 24 25
26 27 28
29
30 31 32
33 34
35
22
23 24 25
OUTPUT FREQUENCY (GHz)
26 27 28
29
30 31 32
33 34
35
33 34
35
OUTPUT FREQUENCY (GHz)
Output Power vs.
Supply Voltage @ 3 dBm Drive Level
Isolation @ 3 dBm Drive Level
20
20
OUTPUT POWER (dBm)
15
+4.5V
+5.0V
+5.5V
10
5
10
Fo
2Fo
3Fo
5
0
-5
-10
-15
-20
0
-25
22
23 24 25
26 27 28
29
30 31 32
33 34
22
35
23 24 25
OUTPUT FREQUENCY (GHz)
26 27 28
29
30 31 32
OUTPUT FREQUENCY (GHz)
Output Power vs. Input Power
25
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
15
Frequency Multipliers
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
15
15
10
5
0
24GHz
28GHz
33GHz
-5
-10
-15
-20
-10
-8
-6
-4
-2
0
2
4
6
8
10
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
4-2
HMC-C033
v03.0711
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER MODULE, 24 - 33 GHz OUTPUT
Input Return Loss vs.
Temperature @ 0 dBm Drive Level
Output Return Loss vs.
Temperature @ 0 dBm Drive Level
0
-5
+25C
+85C
-55C
-5
RETURN LOSS (dB)
4
RETURN LOSS (dB)
0
-10
-15
+25C
+85C
-55C
-10
-15
-20
Frequency Multipliers
-25
-20
-30
11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5
22
23 24 25
FREQUENCY (GHz)
26 27 28
29
30 31 32
35
Typical Supply Current vs. Vdd
Absolute Maximum Ratings
RF Input (Vdc = +5V)
+13 dBm
Vdd (Vdc)
Idd (mA)
Bias Supply Voltage (Vdc)
+6 Vdc
4.5
81
Storage Temperature
-65 to +150 °C
5.0
81
Operating Temperature
-55 to +85 °C
5.5
81
Note:
Multiplier will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Pin Description
4-3
33 34
FREQUENCY (GHz)
Pin Number
Function
Description
1
RFIN and
RF Ground
Pin is AC coupled and matched
to 50 Ohms. RFIN uses a female
2.92mm field replaceable connector.
2, 5, 6
GND
One of these pins must be connected
to power supply ground.
3
Vdc
Power supply voltage for the amplifier includes a 7.5V
zener diode for over voltage and negative voltage
protection
4
RFOUT and
RF Ground
Pin is AC coupled and matched
to 50 Ohms. RFOUT uses a female
2.92mm field replaceable connector.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C033
v03.0711
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER MODULE, 24 - 33 GHz OUTPUT
Outline Drawing
Frequency Multipliers
4
Package Information
Package Type
C-10
Package Weight [1]
18.7 gms [2]
Spacer Weight
3.3 gms [2]
[1] Includes the connectors
[2] ±1 gms Tolerance
NOTES:
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. FINISH: GOLD PLATE OVER NICKEL PLATE
3. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. TOLERANCES:
4.1 .XX = ±0.02
4.2 .XXX = ±0.010
5. FIELD REPLACEABLE 2.92mm CONNECTORS
TENSOLITE 231CCSF OR EQUIVALENT
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
4-4
Download