81 GHz to 86 GHz
E-Band I/Q Downconverter
HMC7587
Data Sheet
FEATURES
GENERAL DESCRIPTION
Conversion gain: 10 dB typical
Image rejection: 30 dBc typical
Noise figure: 6 dB typical
Input power for 1 dB compression (P1dB): −10 dBm typical
Input third-order intercept (IP3): −2 dBm typical
Input second-order intercept (IP2): 25 dBm typical
6× LO leakage at RFIN: −40 dBm typical
Radio frequency (RF) return loss: 10 dB typical
Local oscillator (LO) return loss: 20 dB typical
Die size: 3.599 mm × 2.199 mm × 0.05 mm
The HMC7587 is an integrated, E-band gallium arsenide (GaAs),
monolithic microwave integrated circuit (MMIC), in-phase/
quadrature (I/Q) downconverter chip that operates from 81 GHz
to 86 GHz. The HMC7587 provides a small signal conversion
gain of 10 dB with 30 dBc of image rejection across the frequency
band. The device uses a low noise amplifier followed by an image
rejection mixer that is driven by a 6× multiplier.
The image rejection mixer eliminates the need for a filter following
the low noise amplifier. Differential I and Q mixer outputs are
provided for direct conversion applications. Alternatively, the
outputs can be combined using an external 90° hybrid and two
external 180° hybrids to allow for single-sideband applications. All
data includes the effect of a 3 mil wide ribbon wedge bond on the
RF port, and a 1 mil gold wire wedge bond on the intermediate
frequency (IF) ports.
APPLICATIONS
E-band communication systems
High capacity wireless backhauls
Test and measurement
FUNCTIONAL BLOCK DIAGRAM
13
14
15
16
17
18
19
20
21
LOIN
12
VGX2
11
VGX3
10
VDMULT
9
VDAMP1
8
VDAMP2
VGMIX
7
VGAMP
6
IFIP 5
IFIN 4
×6
IFQN 3
RFIN
IFQP 2
22
39
38
37
36
34
33
32
31
30
VGLNA1
VDLNA1
VGLNA2
VDLNA2
VGLNA3
35
29
28
27
26
24
25
13141-001
40
VDLNA3
HMC7587
VDLNA4
1
VGLNA4
23
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC7587
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
Thermal Resistance ...................................................................... 4
ESD Caution .................................................................................. 4
Pin Configuration and Function Descriptions ............................. 5
Interface Schematics..................................................................... 6
Typical Performance Characteristics ............................................. 7
Upper Sideband Selected, IF = 500 MHz .................................. 7
Upper Sideband Selected, IF = 1000 MHz .............................. 13
Upper Sideband Selected, IF = 2000 MHz .............................. 18
Noise Figure Performance with Upper Sideband Selected ... 23
Amplitude Balance Performance with Upper Sideband
Selected ........................................................................................ 24
Phase Balance Performance with Upper Sideband Selected 25
Lower Sideband Selected, IF = 500 MHz ................................ 26
Lower Sideband Selected, IF = 1000 MHz .............................. 31
Lower Sideband Selected, IF = 2000 MHz .............................. 36
Noise Figure Performance with Lower Sideband Selected ... 41
Amplitude Balance Performance with Lower Sideband
Selected ........................................................................................ 42
Spurious Performance with Upper Sideband Selected, IF =
500 MHz ...................................................................................... 44
Spurious Performance with Upper Sideband Selected, IF =
1000 MHz .................................................................................... 45
Spurious Performance with Upper Sideband Selected, IF =
2000 MHz .................................................................................... 46
Spurious Performance with Lower Sideband Selected, IF =
500 MHz ...................................................................................... 47
Spurious Performance with Lower Sideband Selected, IF =
1000 MHz .................................................................................... 48
Spurious Performance with Lower Sideband Selected, IF =
2000 MHz .................................................................................... 49
Theory of Operation ...................................................................... 50
Applications Information .............................................................. 51
Biasing Sequence ........................................................................ 51
Image Rejection Downconversion ........................................... 51
Zero IF Direct Conversion ........................................................ 52
Assembly Diagram ..................................................................... 53
Mounting and Bonding Techniques for Millimeterwave GaAs
MMICs ............................................................................................. 54
Handling Precautions ................................................................ 54
Mounting ..................................................................................... 54
Wire Bonding.............................................................................. 54
Outline Dimensions ....................................................................... 55
Ordering Guide .......................................................................... 55
Phase Balance Performance with Lower Sideband Selected. 43
REVISION HISTORY
3/16—Revision A: Initial Version
Rev. A | Page 2 of 55
Data Sheet
HMC7587
SPECIFICATIONS
TA = 25°C, IF = 500 MHz, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, voltage on the VDLNAx pins (VDLNA) = 3 V, LO = 2 dBm, upper sideband
selected. Measurements performed as a downconverter with external 90° and 180° hybrids at the IF ports, unless otherwise noted.
Table 1.
Parameter
OPERATING CONDITIONS
RF Frequency Range
LO Frequency Range
IF Frequency Range
LO Drive Range
PERFORMANCE
Conversion Gain
Image Rejection
Input Third-Order Intercept (IP3)
Input Second-Order Intercept (IP2)
Input Power for 1 dB Compression (P1dB)
6× LO Leakage at RF Input (RFIN)
1× LO Leakage at IF Output (IFOUT)
Amplitude Balance 1
Phase Balance1
Noise Figure
RF Return Loss
LO Return Loss
IF Return Loss1
POWER SUPPLY
Supply Current
IDAMP 2
IDMULT 3
IDLNA 4
Test Conditions/Comments
Min
Typ
81
11.83
0
2
8
20
LO = 2 dBm at 12 GHz
Under LO drive
Max
Unit
86
14.33
10
8
GHz
GHz
GHz
dBm
10
30
−2
25
−10
−40
−50
−0.5
±4
6
10
20
25
dB
dBc
dBm
dBm
dBm
dBm
dBm
dB
Degrees
dB
dB
dB
dB
175
80
50
mA
mA
mA
These measurements were performed without external hybrids at the IF ports.
Adjust VGAMP between −2 V and 0 V to achieve the total quiescent current, IDAMP = IDAMP1 + IDAMP2 = 175 mA.
3
Adjust VGX2 and VGX3 between −2 V and 0 V to the achieve the quiescent current, IDMULT = 1 mA to 2 mA. See the Applications Information section for more information.
4
Adjust VGLNAx between −2 V and 0 V to achieve the quiescent current, IDLNA1 + IDLNA2 + IDLNA3 + IDLNA4 = 50 mA.
1
2
Rev. A | Page 3 of 55
HMC7587
Data Sheet
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 2.
Parameter
Drain Bias Voltage
VDAMP1, VDAMP2
VDMULT
VDLNA1, VDLNA2, VDLNA3, VDLNA4
Gate Bias Voltage
VGAMP
VGX2, VGX3
VGLNA1, VGLNA2, VGLNA3, VGLNA4
VGMIX
LO Input Power
Maximum Junction Temperature (to
Maintain 1 Million Hours Mean Time to
Failure (MTTF))
Storage Temperature Range
Operating Temperature Range
Table 3. Thermal Resistance
Rating
Package Type
40-Pad Bare Die [CHIP]
4.5 V
3V
4.5 V
1
Unit
°C/W
Based on ABLEBOND® 84-1LMIT as die attach epoxy with thermal
conductivity of 3.6 W/mK.
ESD CAUTION
−3 V to 0 V
−3 V to 0 V
−3 V to 0 V
−3 V to 0 V
10 dBm
175°C
θJC1
61.7
−65°C to +150°C
−55°C to +85°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Rev. A | Page 4 of 55
Data Sheet
HMC7587
18
19
GND
20
21
GND
17
LOIN
16
GND
15
VGX2
14
GND
13
VGX3
12
GND
11
VDMULT
10
GND
GND
9
VDAMP1
8
GND
7
VGAMP
6
VDAMP2
IFIP 5
VGMIX
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
IFIN 4
HMC7587
IFQN 3
IFQP 2
GND 22
GND
VDLNA3
GND
VGLNA3
GND
VDLNA2
GND
VGLNA2
GND
VDLNA1
GND
VGLNA1
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
13141-002
VGLNA4
40
GND 24
GND
GND
1 GND
VDLNA4
RFIN 23
Figure 2. Pad Configuration
Table 4. Pad Function Descriptions
Pad No.
1, 7, 9, 11, 13, 15, 17,
19, 21, 22, 24, 25, 27,
29, 31, 33, 35, 37, 39
2, 3
Mnemonic
GND
Description
Ground Connect (See Figure 3).
IFQP, IFQN
4, 5
IFIN, IFIP
6
VGMIX
8, 12
VDAMP2, VDAMP1
10
VGAMP
14
VDMULT
16, 18
VGX3, VGX2
20
23
26, 30, 34, 38
LOIN
RFIN
VGLNA1, VGLNA2,
VGLNA3, VGLNA4
VDLNA1, VDLNA2,
VDLNA3, VDLNA4
GND
Positive and Negative IF Q Inputs. These pads are dc-coupled. When operation to dc is not
required, block these pads externally using a series capacitor with a value chosen to pass the
necessary frequency range. For operation to dc, these pads must not source or sink more than
3 mA of current or die malfunction and possible die failure may result (see Figure 4).
Negative and Positive IF I Inputs. These pads are dc-coupled. When operation to dc is not
required, block these pads externally using a series capacitor with a value chosen to pass the
necessary frequency range. For operation to dc, these pads must not source or sink more than
3 mA of current or die malfunction and possible die failure may result (see Figure 4).
Gate Voltage for the FET Mixer (See Figure 5). External bypass capacitors of 120 pF, 0.01 µF, and
4.7 µF are recommended (see Figure 211).
Power Supply Voltage for the First and the Second Stage LO Amplifier (See Figure 5). External
bypass capacitors of 120 pF, 0.01 µF, and 4.7 µF are recommended (see Figure 211).
Gate Voltage for the First and the Second Stage LO Amplifier (See Figure 5). External bypass capacitors
of 120 pF, 0.01 µF, and 4.7 µF are recommended (see Figure 211).
Power Supply Voltage for the LO Multiplier (See Figure 5). External bypass capacitors of 120 pF,
0.01 µF, and 4.7 µF are recommended (see Figure 211).
Gate Voltage for the LO Multiplier (See Figure 5). External bypass capacitors of 120 pF, 0.01 µF, and
4.7 µF are recommended (see Figure 211).
Local Oscillator Input. This pad is dc-coupled and matched to 50 Ω (see Figure 6).
RF Input. This pad is ac-coupled and matched to 50 Ω (see Figure 7).
Gate Voltage for the Low Noise Amplifier (See Figure 8). External bypass capacitors of 120 pF,
0.01 µF, and 4.7 µF are recommended (see Figure 211).
Power Supply Voltage for the Low Noise Amplifier (See Figure 8). External bypass capacitors of
120 pF, 0.01 µF, and 4.7 µF are recommended (see Figure 211).
Ground. The die bottom must be connected to RF/dc ground (see Figure 3).
28, 32, 36, 40
Die Bottom
Rev. A | Page 5 of 55
HMC7587
Data Sheet
INTERFACE SCHEMATICS
13141-006
13141-003
LOIN
GND
Figure 3. GND Interface
Figure 6. LOIN Interface
200Ω
RFIN
Figure 4. IFIN, IFIP, IFQN, and IFQP Interface
Figure 7. RFIN Interface
VDLNA1 , VDLNA2 ,
VDLNA3 , VDLNA4
VDAMP1 , VDAMP2 ,
VDMULT
13141-005
Figure 5. VGMIX, VDAMP1, VDAMP2, VDMULT, VGAMP, VGX2, and VGX3 Interface
VGLNA1 , VGLNA2,
VGLNA3 , VGLNA4
13141-008
100Ω
100Ω
VGMIX, VGAMP,
VGX2, VGX3
13141-007
13141-004
IFIN, IFIP,
IFQN, IFQP
Figure 8. VDLNA1, VDLNA2, VDLNA3, VDLNA4, VGLNA1, VGLNA2, VGLNA3, and VGLNA4 Interface
Rev. A | Page 6 of 55
Data Sheet
HMC7587
TYPICAL PERFORMANCE CHARACTERISTICS
UPPER SIDEBAND SELECTED, IF = 500 MHz
16
16
14
TA = +85°C
TA = +25°C
TA = –55°C
12
12
CONVERSION GAIN (dB)
10
8
6
4
10
8
6
2
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 9. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, Voltage on the VDLNAx Pins
(VDLNA) = 4 V
14
14
12
12
CONVERSION GAIN (dB)
16
8
LO
LO
LO
LO
LO
LO
LO
6
4
2
0
81.0
81.5
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
4
0
81.0
–8
–4
83.0
83.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 11. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
–16
84.5
82.5
84.0
84.5
85.0
85.5 86.0
0
–12
84.0
82.0
4
–16
83.5
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
8
–12
83.0
85.5 86.0
12
–4
82.5
85.0
16
0
82.0
84.5
20
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
81.5
84.0
Figure 13. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
8
–20
81.0
83.5
RF FREQUENCY (GHz)
13141-011
CONVERSION GAIN (dB)
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
LO
LO
LO
LO
LO
LO
LO
6
CONVERSION GAIN (dB)
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
83.0
8
Figure 10. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
20
82.5
10
2
83.5
82.0
Figure 12. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
16
10
81.5
RF FREQUENCY (GHz)
13141-010
CONVERSION GAIN (dB)
0
81.0
13141-013
81.5
13141-012
2
13141-009
0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
4
–20
81.0
81.5
82.0
82.5
83.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 14. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 7 of 55
13141-014
CONVERSION GAIN (dB)
14
HMC7587
Data Sheet
0
0
–5
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–20
–25
–30
–35
–30
–35
–40
–45
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 15. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–50
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 18. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
0
–15
–20
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
–5
–10
IMAGE REJECTION (dBc)
LO
LO
LO
LO
LO
LO
LO
–10
–25
–30
–35
–15
–20
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–25
–30
–35
–40
–45
–50
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-016
–45
–50
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 16. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
13141-019
–40
Figure 19. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
0
0
–15
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–10
–20
–25
–30
–35
–15
–35
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-017
–45
83.0
Figure 17. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–30
–40
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–25
–45
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–20
–40
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–5
–50
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 20. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 8 of 55
13141-020
–10
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–5
–50
81.0
81.5
RF FREQUENCY (GHz)
0
–5
IMAGE REJECTION (dBc)
–25
–45
–50
81.0
IMAGE REJECTION (dBc)
–15
–20
–40
13141-015
IMAGE REJECTION (dBc)
–15
TA = +85°C
TA = +25°C
TA = –55°C
–10
13141-018
–5
–10
Data Sheet
HMC7587
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–6
–8
–8
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
8
6
6
4
4
2
2
IP3 (dBm)
10
8
0
–6
–8
–10
81.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.5
84.0
84.5
85.0
85.5 86.0
LO
LO
LO
LO
LO
LO
LO
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–2
–6
–8
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 22. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
Figure 25. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
8
8
6
6
4
4
IP3 (dBm)
2
0
–2
–6
–8
81.5
82.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.5
83.0
83.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
84.0
84.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
2
0
–2
–4
–6
–8
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-023
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–10
81.0
83.0
–4
13141-022
LO
LO
LO
LO
LO
LO
LO
82.5
Figure 24. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
10
–4
82.0
RF FREQUENCY (GHz)
Figure 21. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–2
81.5
13141-025
82.0
13141-021
81.5
13141-024
–6
–10
81.0
IP3 (dBm)
–2
–4
–4
IP3 (dBm)
2
0
Figure 23. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 26. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 9 of 55
13141-026
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
HMC7587
Data Sheet
50
50
45
TA = +85°C
TA = +25°C
TA = –55°C
40
35
IP2 (dBm)
30
25
20
20
10
10
5
5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
0
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 30. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
50
40
35
30
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
40
35
25
20
30
20
15
10
10
5
0
81.0
0
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-028
5
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
25
15
81.5
LO
LO
LO
LO
LO
LO
LO
45
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
45
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 28. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
13141-031
50
Figure 31. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
50
45
40
40
35
35
30
30
IP2 (dBm)
45
25
20
10
5
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-029
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
25
Figure 29. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 32. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 10 of 55
13141-032
50
0
81.0
81.5
RF FREQUENCY (GHz)
Figure 27. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IP2 (dBm)
25
15
0
81.0
IP2 (dBm)
30
15
13141-027
IP2 (dBm)
35
TA = +85°C
TA = +25°C
TA = –55°C
40
13141-030
45
Data Sheet
0
0
–2
–2
TA = +85°C
TA = +25°C
TA = –55°C
–8
–6
–8
–10
–10
–12
–12
82.0
82.5
83.0
83.5
84.0
85.0
84.5
85.5 86.0
RF FREQUENCY (GHz)
–14
81.0
13141-033
81.5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 33. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
13141-036
–6
–14
81.0
TA = +85°C
TA = +25°C
TA = –55°C
–4
P1dB (dBm)
–4
P1dB (dBm)
HMC7587
Figure 36. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
–30
–30
TA = +85°C
TA = +25°C
TA = –55°C
–35
TA = +85°C
TA = +25°C
TA = –55°C
–35
LEAKAGE (dBm)
LEAKAGE (dBm)
–40
–45
–50
–55
–40
–45
–50
–60
–55
–60
81.0
14.4
1× LO FREQUENCY (GHz)
13141-034
14.3
14.2
14.1
14.0
13.9
13.8
13.7
13.6
13.5
13.4
13.3
13.2
13.1
13.0
12.9
–70
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
6× LO FREQUENCY (GHz)
Figure 37. 6× LO Leakage at RFIN vs. 6× LO Frequency
at Various Temperatures, LO = 2 dBm, VDLNA = 3 V
Figure 34. 1× LO Leakage at IFOUT vs. 1× LO Frequency
at Various Temperatures, LO = 2 dBm, VDLNA = 3 V
–30
–30
LO
LO
LO
LO
–35
= 2dBm
= 4dBm
= 6dBm
= 8dBm
LO
LO
LO
LO
LO
–35
LEAKAGE (dBm)
–40
–45
–50
–55
= 0dBm
= 2dBm
= 4dBm
= 6dBm
= 8dBm
–40
–45
–50
–60
–55
13141-035
1× LO FREQUENCY (GHz)
14.4
14.3
14.2
14.1
14.0
13.9
13.8
13.7
13.6
13.5
13.4
13.3
13.2
13.1
13.0
–70
–60
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
6× LO FREQUENCY (GHz)
Figure 38. 6× LO Leakage at RFIN vs. 6× LO Frequency
at Various LO Powers, VDLNA = 3 V
Figure 35. 1× LO Leakage at IFOUT vs. 1× LO Frequency
at Various LO Powers, VDLNA = 3 V
Rev. A | Page 11 of 55
86.0
13141-038
–65
12.9
LEAKAGE (dBm)
81.5
13141-037
–65
HMC7587
Data Sheet
0
0
–4
–6
–6
RETURN LOSS (dB)
–4
–8
–10
–12
–14
–14
–16
–18
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 39. RF Return Loss vs. RF Frequency at Various Temperatures,
LO = 2 dBm, LO = 12 GHz, VDLNA = 4 V
–20
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
LO
LO
LO
LO
LO
LO
LO
–5
–10
–15
–20
–25
–15
–20
–25
–30
–35
–35
12.6
13.0
13.4
13.8
14.2
14.6
LO FREQUENCY (GHz)
13141-040
–30
12.2
Figure 40. LO Return Loss vs. LO Frequency at Various Temperatures,
LO = 2 dBm, VDLNA = 3 V
0
IFQP
IFIP
IFQN
IFQP
–5
–10
–15
–20
–25
–30
1.1
2.1
3.1
4.1
5.1
6.1
7.1
8.1
IF FREQUENCY (GHz)
9.1
10.1
13141-041
–35
Figure 41. IF Return Loss vs. IF Frequency,
LO = 2 dBm at 12 GHz, VDLNA = 3 V
Rev. A | Page 12 of 55
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–40
11.8
12.2
12.6
13.0
13.4
13.8
14.2
14.6
LO FREQUENCY (GHz)
Figure 43. LO Return Loss vs. LO Frequency at Various LO Powers,
VDLNA = 3 V
13141-043
RETURN LOSS (dB)
–10
–40
0.1
82.0
Figure 42. RF Return Loss vs. RF Frequency at Various Temperatures,
LO = 2 dBm, LO = 12 GHz, VDLNA = 3 V
TA = +85°C
TA = +25°C
TA = –55°C
–5
–40
11.8
81.5
RF FREQUENCY (GHz)
0
RETURN LOSS (dB)
–12
–18
RF FREQUENCY (GHz)
RETURN LOSS (dB)
–8
–10
–16
–20
81.0
TA = +85°C
TA = +25°C
TA = –55°C
–2
13141-039
RETURN LOSS (dB)
–2
13141-042
TA = +85°C
TA = +25°C
TA = –55°C
Data Sheet
HMC7587
UPPER SIDEBAND SELECTED, IF = 1000 MHz
16
16
14
TA = +85°C
TA = +25°C
TA = –55°C
12
CONVERSION GAIN (dB)
10
8
6
4
6
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
14
12
12
CONVERSION GAIN (dB)
14
8
6
4
2
81.5
82.0
82.5
83.0
83.5
84.0
84.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
85.0
85.5 86.0
RF FREQUENCY (GHz)
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
4
12
–4
–8
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-046
84.5
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 46. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
83.5
84.0
–4
–8
–16
84.0
82.0
0
–16
83.5
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
4
–12
83.0
85.5 86.0
8
–12
82.5
85.0
LO
LO
LO
LO
LO
LO
LO
6
16
0
82.0
84.5
8
20
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
81.5
84.0
Figure 48. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
8
–20
81.0
83.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
83.0
10
0
81.0
Figure 45. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
20
82.5
2
13141-045
LO
LO
LO
LO
LO
LO
LO
82.0
Figure 47. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
16
10
81.5
RF FREQUENCY (GHz)
16
0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13141-047
82.5
Figure 44. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
CONVERSION GAIN (dB)
8
13141-048
82.0
13141-044
81.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
10
2
2
0
81.0
12
–20
81.0
81.5
82.0
82.5
83.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 49. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 13 of 55
13141-049
CONVERSION GAIN (dB)
14
HMC7587
Data Sheet
0
0
–4
–4
IMAGE REJECTION (dBc)
–16
–20
–24
–28
–20
–24
–28
–32
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 50. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–40
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 53. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
–8
–20
–24
–28
–12
–16
–24
–28
–32
–36
–36
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–40
81.0
13141-051
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–32
81.5
LO
LO
LO
LO
LO
LO
LO
–4
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 51. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
13141-054
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–8
Figure 54. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
0
–8
–12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–4
–8
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–16
–20
–24
–28
–12
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-052
83.5
Figure 52. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
82.0
82.5
–24
–36
83.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–28
–32
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–20
–36
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–16
–32
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–40
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 55. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 14 of 55
13141-055
0
–40
81.0
82.0
0
LO
LO
LO
LO
LO
LO
LO
–12
–40
81.0
81.5
RF FREQUENCY (GHz)
0
–4
IMAGE REJECTION (dBc)
–16
–36
–40
81.0
IMAGE REJECTION (dBc)
–12
–32
13141-050
IMAGE REJECTION (dBc)
–12
TA = +85°C
TA = +25°C
TA = –55°C
–8
13141-053
TA = +85°C
TA = +25°C
TA = –55°C
–8
Data Sheet
HMC7587
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
IP3 (dBm)
2
0
–2
–2
–6
–6
–8
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
10
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
4
0
–2
2
0
–4
–6
–6
–8
–8
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
13141-057
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–2
–4
81.5
LO
LO
LO
LO
LO
LO
LO
6
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 57. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
13141-060
LO
LO
LO
LO
LO
LO
LO
IP3 (dBm)
8
Figure 60. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
6
4
IP3 (dBm)
2
0
–2
–8
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-058
–6
–8
83.0
Figure 58. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
82.0
82.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–2
–6
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
0
–4
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
2
–4
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 61. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 15 of 55
13141-061
10
–10
81.0
82.0
Figure 59. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
–10
81.0
81.5
RF FREQUENCY (GHz)
Figure 56. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP3 (dBm)
0
–4
–10
81.0
IP3 (dBm)
2
–4
13141-056
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
13141-059
8
HMC7587
Data Sheet
50
50
TA = +85°C
TA = +25°C
TA = –55°C
45
35
30
30
IP2 (dBm)
35
25
20
10
10
5
5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
50
30
40
35
25
20
30
25
15
15
10
10
5
5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
0
81.0
13141-063
81.5
45
45
40
40
35
35
30
30
IP2 (dBm)
50
25
20
5
81.5
82.0
82.5
83.0
83.5
84.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
25
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-064
10
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.0
Figure 66. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
50
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
RF FREQUENCY (GHz)
Figure 63. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
15
LO
LO
LO
LO
LO
LO
LO
20
13141-066
35
45
Figure 64. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 67. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 16 of 55
13141-067
40
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
45
0
81.0
82.0
Figure 65. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
50
0
81.0
81.5
RF FREQUENCY (GHz)
Figure 62. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP2 (dBm)
20
15
RF FREQUENCY (GHz)
IP2 (dBm)
25
15
0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
40
13141-062
IP2 (dBm)
40
13141-065
45
Data Sheet
HMC7587
0
0
–2
–2
P1dB (dBm)
–6
–8
–10
–6
–8
–10
–12
–12
–14
–14
–16
81.0
81.5
82.0
82.5
TA = +85°C
TA = +25°C
TA = –55°C
–4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-068
P1dB (dBm)
–4
Figure 68. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–16
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 69. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 17 of 55
13141-071
TA = +85°C
TA = +25°C
TA = –55°C
HMC7587
Data Sheet
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
14
14
12
12
CONVERSION GAIN (dB)
16
8
LO
LO
LO
LO
LO
LO
LO
6
4
2
81.5
82.0
82.5
83.0
83.5
84.0
84.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
85.0
85.5 86.0
RF FREQUENCY (GHz)
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–8
85.5 86.0
RF FREQUENCY (GHz)
13141-076
85.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 72. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–4
–8
–16
84.5
82.0
4
–12
84.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
8
–16
83.5
85.5 86.0
RF FREQUENCY (GHz)
–12
83.0
85.0
LO
LO
LO
LO
LO
LO
LO
4
12
–4
82.5
84.5
6
16
0
82.0
84.0
8
20
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
81.5
83.5
Figure 74. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
8
–20
81.0
83.0
10
0
81.0
CONVERSION GAIN (dB)
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
82.5
2
Figure 71. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
20
82.0
Figure 73. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
16
10
81.5
RF FREQUENCY (GHz)
13141-075
CONVERSION GAIN (dB)
4
13141-077
82.5
Figure 70. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
6
13141-078
82.0
13141-074
81.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
2
2
0
81.0
10
–20
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 75. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 18 of 55
13141-079
CONVERSION GAIN (dB)
UPPER SIDEBAND SELECTED, IF = 2000 MHz
Data Sheet
HMC7587
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–32
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 76. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–40
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 79. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
–8
–20
–24
–28
–12
–16
–24
–28
–32
–36
–36
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–40
81.0
13141-081
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–32
81.5
LO
LO
LO
LO
LO
LO
LO
–4
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 77. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
13141-084
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–8
Figure 80. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
0
–4
–8
–12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–4
–8
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–16
–20
–24
–28
–12
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-082
83.5
Figure 78. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
82.0
82.5
–28
–32
83.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–24
–36
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–20
–36
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–16
–32
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–40
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 81. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 19 of 55
13141-085
0
–40
81.0
82.0
0
LO
LO
LO
LO
LO
LO
LO
–12
–40
81.0
81.5
RF FREQUENCY (GHz)
0
–4
IMAGE REJECTION (dBc)
–16
–36
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
81.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13141-080
IMAGE REJECTION (dBc)
–8
13141-083
–4
HMC7587
Data Sheet
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
IP3 (dBm)
2
0
–2
–2
–6
–6
–8
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
–2
–4
–4
–6
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–6
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
13141-087
81.5
–10
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 83. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
13141-090
–8
RF FREQUENCY (GHz)
Figure 86. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
6
4
IP3 (dBm)
2
0
–2
–8
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-088
–6
–8
83.0
Figure 84. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
82.0
82.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–6
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–2
–4
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
2
–4
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 87. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 20 of 55
13141-091
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
–10
81.0
82.0
Figure 85. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
10
–10
81.0
81.5
RF FREQUENCY (GHz)
Figure 82. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IP3 (dBm)
0
–4
–10
81.0
IP3 (dBm)
2
–4
13141-086
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
13141-089
8
HMC7587
50
45
45
40
40
35
35
30
30
25
TA = +85°C
TA = +25°C
TA = –55°C
20
15
10
5
5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
45
40
40
35
35
30
30
IP2 (dBm)
50
45
25
15
10
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
20
10
83.0
83.5
84.0
84.5
85.0
85.5 86.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
45
40
40
35
35
30
30
IP2 (dBm)
50
45
25
20
5
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
83.0
83.5
84.0
84.5
85.0
85.5 86.0
25
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-094
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
82.5
Figure 92. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
50
10
82.0
RF FREQUENCY (GHz)
Figure 89. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
15
81.5
Figure 90. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 93. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 21 of 55
13141-097
82.0
13141-093
81.5
13141-096
5
RF FREQUENCY (GHz)
0
81.0
82.5
25
15
5
0
81.0
82.0
Figure 91. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
50
LO
LO
LO
LO
LO
LO
LO
81.5
RF FREQUENCY (GHz)
Figure 88. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
20
TA = +85°C
TA = +25°C
TA = –55°C
15
RF FREQUENCY (GHz)
IP2 (dBm)
20
10
0
81.0
IP2 (dBm)
25
13141-095
IP2 (dBm)
50
13141-092
IP2 (dBm)
Data Sheet
HMC7587
Data Sheet
0
0
–2
TA = +85°C
TA = +25°C
TA = –55°C
P1dB (dBm)
–6
–8
–10
–6
–8
–10
–12
–12
–14
–14
–16
81.0
81.5
82.0
82.5
TA = +85°C
TA = +25°C
TA = –55°C
–4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-098
P1dB (dBm)
–4
Figure 94. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–16
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 95. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 22 of 55
13141-101
–2
Data Sheet
HMC7587
NOISE FIGURE PERFORMANCE WITH UPPER SIDEBAND SELECTED
10
10
TA = +85°C
TA = +25°C
TA = –55°C
8
NOISE FIGURE (dB)
7
6
5
4
3
3
1
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
0
81.0
83.0
83.5
84.0
84.5
85.0
85.5
86.0
9
7
7
6
5
4
3
6
5
4
2
2
1
1
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
0
81.0
13141-105
81.5
LO
LO
LO
LO
LO
LO
LO
3
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 97. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
13141-108
NOISE FIGURE (dB)
8
Figure 100. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 1000 MHz, VDLNA = 3 V
10
10
TA = +85°C
TA = +25°C
TA = –55°C
9
8
7
7
6
5
4
3
6
5
4
2
1
1
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
13141-106
2
81.5
Figure 98. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
LO
LO
LO
LO
LO
LO
LO
3
0
81.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 101. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 23 of 55
13141-109
NOISE FIGURE (dB)
8
0
81.0
82.5
10
TA = +85°C
TA = +25°C
TA = –55°C
8
9
82.0
Figure 99. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 3 V
10
0
81.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
RF FREQUENCY (GHz)
Figure 96. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
9
LO
LO
LO
LO
LO
LO
LO
4
1
RF FREQUENCY (GHz)
NOISE FIGURE (dB)
6
5
2
0
81.0
NOISE FIGURE (dB)
7
2
13141-104
NOISE FIGURE (dB)
8
9
13141-107
9
HMC7587
Data Sheet
AMPLITUDE BALANCE PERFORMANCE WITH UPPER SIDEBAND SELECTED
0
–0.5
–1.0
–1.5
–1.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
–2.0
81.0
0.5
AMPLITUDE BALANCE (dB)
0.5
–1.0
TA = +85°C
TA = +25°C
TA = –55°C
–2.0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 103. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
83.5
84.0
84.5
85.0
85.5 86.0
0
–0.5
TA = +85°C
TA = +25°C
TA = –55°C
–1.0
–2.0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 106. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
1.0
1.0
TA = +85°C
TA = +25°C
TA = –55°C
TA = +85°C
TA = +25°C
TA = –55°C
0.5
AMPLITUDE BALANCE (dB)
0.5
0
–0.5
–1.0
0
–0.5
–1.0
–1.5
–1.5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
–2.0
81.0
13141-112
–2.0
81.0
83.0
–1.5
13141-111
–1.5
82.5
Figure 105. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
1.0
–0.5
82.0
RF FREQUENCY (GHz)
1.0
0
81.5
13141-113
82.0
Figure 102. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
AMPLITUDE BALANCE (dB)
–0.5
13141-114
81.5
RF FREQUENCY (GHz)
AMPLITUDE BALANCE (dB)
0
–1.5
13141-110
–2.0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
0.5
Figure 104. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-115
AMPLITUDE BALANCE (dB)
0.5
1.0
TA = +85°C
TA = +25°C
TA = –55°C
AMPLITUDE BALANCE (dB)
1.0
Figure 107. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 24 of 55
Data Sheet
HMC7587
PHASE BALANCE PERFORMANCE WITH UPPER SIDEBAND SELECTED
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
PHASE BALANCE (Degrees)
4
2
0
–2
–4
–6
–4
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 111. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
10
8
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
–10
81.0
13141-117
81.5
Figure 109. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-120
–8
RF FREQUENCY (GHz)
Figure 112. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
8
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
4
2
0
–2
–4
–6
–8
–8
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
–10
81.0
13141-118
81.5
Figure 110. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
TA = +85°C
TA = +25°C
TA = –55°C
6
–6
–10
81.0
81.5
13141-119
82.0
10
PHASE BALANCE (Degrees)
–2
–10
81.0
13141-116
81.5
Figure 108. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
PHASE BALANCE (Degrees)
2
0
–8
RF FREQUENCY (GHz)
–10
81.0
6
4
–6
–8
–10
81.0
TA = +85°C
TA = +25°C
TA = –55°C
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-121
PHASE BALANCE (Degrees)
8
Figure 113. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 25 of 55
HMC7587
Data Sheet
16
14
14
12
12
8
6
TA = +85°C
TA = +25°C
TA = –55°C
2
0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 114. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
4
0
81.0
14
14
12
12
CONVERSION GAIN (dB)
16
10
8
6
4
2
0
81.0
81.5
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 115. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
LO
LO
LO
LO
LO
LO
LO
6
4
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
–4
85.5 86.0
RF FREQUENCY (GHz)
Figure 116. Conversion Gain vs. RF Frequency at Various IDLNA
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–20
81.0
13141-124
85.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
–16
84.5
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
4
–16
84.0
85.5 86.0
8
–12
83.5
85.0
12
–12
83.0
84.5
16
0
82.5
84.0
20
–4
82.0
83.5
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
81.5
83.0
Figure 118. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
8
–20
81.0
82.5
8
0
81.0
CONVERSION GAIN (dB)
16
82.0
10
2
RF FREQUENCY (GHz)
20
81.5
Figure 117. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
16
LO
LO
LO
LO
LO
LO
LO
TA = +85°C
TA = +25°C
TA = –55°C
RF FREQUENCY (GHz)
13141-123
CONVERSION GAIN (dB)
6
2
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
81.5
82.0
82.5
83.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
84.5
RF FREQUENCY (GHz)
85.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.5 86.0
13141-127
4
10
13141-126
10
13141-125
CONVERSION GAIN (dB)
16
13141-122
CONVERSION GAIN (dB)
LOWER SIDEBAND SELECTED, IF = 500 MHz
Figure 119. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 26 of 55
Data Sheet
HMC7587
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–36
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 120. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–40
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 123. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
–9
–20
–24
–28
–13
–17
–25
–29
–33
–37
–36
–41
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–45
81.0
13141-129
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–21
–32
81.5
LO
LO
LO
LO
LO
LO
LO
–5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 121. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
13141-132
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–12
Figure 124. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
0
–8
–12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–4
–8
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–16
–20
–24
–28
–12
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
–40
81.0
13141-130
83.5
Figure 122. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
82.0
82.5
–28
–36
83.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–24
–32
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–20
–36
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–16
–32
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
81.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-133
0
–4
–40
81.0
82.0
–1
LO
LO
LO
LO
LO
LO
LO
–8
–40
81.0
81.5
RF FREQUENCY (GHz)
0
–4
IMAGE REJECTION (dBc)
–16
–32
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
81.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13141-128
IMAGE REJECTION (dBc)
–8
13141-131
–4
Figure 125. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 27 of 55
HMC7587
Data Sheet
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
IP3 (dBm)
2
0
–2
–2
–6
–6
–8
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 129. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
0
–4
–6
–6
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-135
81.5
–10
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 127. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
Figure 130. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
6
4
IP3 (dBm)
2
0
–2
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–2
–4
–6
–6
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 128. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 131. Input IP3 vs. RF Frequency at Various IDLNA
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 28 of 55
13141-139
–8
13141-136
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
2
–4
–10
81.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
13141-138
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–2
–4
–10
81.0
81.5
RF FREQUENCY (GHz)
Figure 126. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IP3 (dBm)
0
–4
–10
81.0
IP3 (dBm)
2
–4
13141-134
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
13141-137
8
Data Sheet
HMC7587
50
50
45
TA = +85°C
TA = +25°C
TA = –55°C
40
35
IP2 (dBm)
30
25
20
20
10
10
5
5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
0
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 135. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
50
40
35
30
40
35
25
20
30
20
15
10
10
5
5
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
0
81.0
13141-141
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
25
15
81.5
LO
LO
LO
LO
LO
LO
LO
45
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 136. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
50
50
45
45
40
40
35
35
30
30
IP2 (dBm)
Figure 133. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
25
20
15
10
5
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
25
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-142
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
Figure 134. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 137. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 29 of 55
13141-144
45
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
13141-145
50
0
81.0
81.5
RF FREQUENCY (GHz)
Figure 132. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IP2 (dBm)
25
15
0
81.0
IP2 (dBm)
30
15
13141-140
IP2 (dBm)
35
TA = +85°C
TA = +25°C
TA = –55°C
40
13141-143
45
HMC7587
Data Sheet
0
0
–2
TA = +85°C
TA = +25°C
TA = –55°C
P1dB (dBm)
–6
–8
–10
–6
–8
–10
–12
–12
–14
–14
–16
81.0
81.5
82.0
82.5
TA = +85°C
TA = +25°C
TA = –55°C
–4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-146
P1dB (dBm)
–4
Figure 138. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–16
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 139. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 30 of 55
13141-149
–2
Data Sheet
HMC7587
LOWER SIDEBAND SELECTED, IF = 1000 MHz
16
16
14
TA = +85°C
TA = +25°C
TA = –55°C
12
CONVERSION GAIN (dB)
10
8
6
4
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 140. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
14
12
12
CONVERSION GAIN (dB)
14
8
LO
LO
LO
LO
LO
LO
LO
6
4
2
81.5
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 141. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
16
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
4
–8
85.5 86.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 142. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–8
–20
81.0
13141-154
RF FREQUENCY (GHz)
85.0
85.5 86.0
–4
–16
84.5
85.0
4
–16
84.0
84.5
8
–12
83.5
82.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
12
–12
83.0
81.5
16
0
82.5
LO
LO
LO
LO
LO
LO
LO
6
20
–4
82.0
84.0
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
81.5
83.5
Figure 144. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
8
–20
81.0
83.0
8
0
81.0
CONVERSION GAIN (dB)
20
82.5
10
2
RF FREQUENCY (GHz)
82.0
Figure 143. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
16
10
81.5
RF FREQUENCY (GHz)
16
0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
4
0
81.0
13141-153
CONVERSION GAIN (dB)
6
13141-156
81.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
2
13141-152
0
81.0
10
13141-155
2
12
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-157
CONVERSION GAIN (dB)
14
Figure 145. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 31 of 55
HMC7587
Data Sheet
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–32
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 146. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–40
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 149. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
–16
–8
–20
–24
–28
–12
–16
–24
–28
–32
–36
–36
82.5
83.0
83.5
84.0
84.5
85.0
–40
81.0
13141-159
82.0
85.5 86.0
RF FREQUENCY (GHz)
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–32
81.5
LO
LO
LO
LO
LO
LO
LO
–4
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 147. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
13141-162
–12
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–8
Figure 150. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
0
–8
–12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–4
–8
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–16
–20
–24
–28
–12
84.0
84.5
85.0
–40
81.0
13141-160
83.5
85.5 86.0
RF FREQUENCY (GHz)
Figure 148. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
82.0
82.5
–28
–36
83.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–24
–36
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–20
–32
82.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–16
–32
81.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 151. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 32 of 55
13141-163
0
–4
–40
81.0
82.0
0
LO
LO
LO
LO
LO
LO
LO
–4
–40
81.0
81.5
RF FREQUENCY (GHz)
0
IMAGE REJECTION (dBc)
–16
–36
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
81.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13141-158
IMAGE REJECTION (dBc)
–8
13141-161
–4
Data Sheet
HMC7587
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
IP3 (dBm)
2
0
–2
–2
–6
–6
–8
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–10
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 155. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
0
–4
–6
–6
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-165
81.5
–10
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 153. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
Figure 156. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
6
4
IP3 (dBm)
2
0
–2
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–2
–4
–6
–6
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 154. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 157. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 33 of 55
13141-169
–8
13141-166
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
2
–4
–10
81.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
13141-168
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–2
–4
–10
81.0
81.5
RF FREQUENCY (GHz)
Figure 152. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP3 (dBm)
0
–4
–10
81.0
IP3 (dBm)
2
–4
13141-164
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
13141-167
8
HMC7587
Data Sheet
50
TA = +85°C
TA = +25°C
TA = –55°C
40
35
30
30
IP2 (dBm)
35
25
20
15
10
5
5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
81.0
45
45
40
40
35
35
30
30
IP2 (dBm)
50
25
10
5
0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
85.0
85.5 86.0
RF FREQUENCY (GHz)
83.0
83.5
84.0
84.5
85.0
85.5 86.0
25
LO
LO
LO
LO
LO
LO
LO
20
15
10
5
0
81.0
13141-171
15
82.5
Figure 161. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
50
LO
LO
LO
LO
LO
LO
LO
82.0
RF FREQUENCY (GHz)
Figure 158. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
20
81.5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 162. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
50
50
45
45
40
40
35
35
30
30
IP2 (dBm)
Figure 159. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
25
20
10
5
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
25
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-172
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
Figure 160. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 163. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 34 of 55
13141-174
81.5
RF FREQUENCY (GHz)
IP2 (dBm)
20
10
0
81.0
IP2 (dBm)
25
15
13141-170
IP2 (dBm)
40
TA = +85°C
TA = +25°C
TA = –55°C
45
13141-175
45
13141-173
50
Data Sheet
HMC7587
0
0
–2
–2
P1dB (dBm)
–6
–8
–10
–6
–8
–10
–12
–12
–14
–14
–16
81.0
81.5
82.0
82.5
TA = +85°C
TA = +25°C
TA = –55°C
–4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-176
P1dB (dBm)
–4
Figure 164. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–16
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 165. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 35 of 55
13141-179
TA = +85°C
TA = +25°C
TA = –55°C
HMC7587
Data Sheet
16
14
14
12
12
8
6
4
TA = +85°C
TA = +25°C
TA = –55°C
2
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
4
0
81.0
14
14
12
12
CONVERSION GAIN (dB)
16
10
8
6
4
2
0
81.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
81.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 167. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
LO
LO
LO
LO
LO
LO
LO
6
4
81.5
12
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
16
12
8
4
0
–4
–8
84.0
84.5
85.0
85.5 86.0
82.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 170. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
CONVERSION GAIN (dB)
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
83.5
RF FREQUENCY (GHz)
20
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.0
8
0
81.0
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
82.5
10
2
83.5
82.0
Figure 169. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
16
LO
LO
LO
LO
LO
LO
LO
TA = +85°C
TA = +25°C
TA = –55°C
RF FREQUENCY (GHz)
13141-183
CONVERSION GAIN (dB)
6
2
Figure 166. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
CONVERSION GAIN (dB)
8
–12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
4
0
–4
–8
–12
–16
–20
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-184
–16
–20
81.0
Figure 168. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
81.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-187
0
81.0
10
13141-186
10
13141-185
CONVERSION GAIN (dB)
16
13141-182
CONVERSION GAIN (dB)
LOWER SIDEBAND SELECTED, IF = 2000 MHz
Figure 171. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 36 of 55
Data Sheet
HMC7587
0
0
–4
–4
IMAGE REJECTION (dBc)
–16
–20
–24
–28
–20
–24
–28
–36
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 172. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–40
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 175. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
0
0
–8
–12
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
–4
–8
IMAGE REJECTION (dBc)
LO
LO
LO
LO
LO
LO
LO
–4
–20
–24
–28
–12
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–24
–28
–36
–40
81.0
–40
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-189
–36
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 173. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
13141-192
–32
–32
Figure 176. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
0
0
–8
–12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–4
–8
IMAGE REJECTION (dBc)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–16
–20
–24
–28
–12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–16
–20
–24
–28
–32
–32
–36
–40
81.0
–40
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-190
–36
Figure 174. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
81.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-193
IMAGE REJECTION (dBc)
–16
–32
–40
81.0
IMAGE REJECTION (dBc)
–12
–32
13141-188
IMAGE REJECTION (dBc)
–12
TA = +85°C
TA = +25°C
TA = –55°C
–8
13141-191
TA = +85°C
TA = +25°C
TA = –55°C
–8
Figure 177. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 37 of 55
HMC7587
Data Sheet
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-194
81.5
–10
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 178. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 181. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–2
–4
–4
–6
–6
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-195
81.5
–10
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 179. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 182. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
6
4
IP3 (dBm)
2
0
–2
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
82.0
82.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
2
0
–2
–4
–4
–6
–6
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-196
–8
–10
81.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
13141-198
–8
–8
–10
81.0
81.5
13141-197
–8
IP3 (dBm)
0
–2
–4
–10
81.0
IP3 (dBm)
2
Figure 180. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–10
81.0
81.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 183. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 38 of 55
13141-199
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
HMC7587
50
45
45
40
40
35
35
30
30
25
TA = +85°C
TA = +25°C
TA = –55°C
20
15
15
10
5
5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 184. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 187. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
50
50
30
40
35
25
20
30
25
20
15
15
10
10
5
0
81.0
0
81.0
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-201
5
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 185. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 188. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
50
50
45
45
40
35
35
30
30
IP2 (dBm)
40
25
20
10
5
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
25
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
10
5
13141-202
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
15
Figure 186. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
0
81.0
81.5
82.0
82.5
83.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
83.5
84.0
84.5
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 189. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 39 of 55
13141-204
35
LO
LO
LO
LO
LO
LO
LO
45
13141-205
40
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
45
IP2 (dBm)
TA = +85°C
TA = +25°C
TA = –55°C
20
10
0
81.0
IP2 (dBm)
25
13141-203
IP2 (dBm)
50
13141-200
IP2 (dBm)
Data Sheet
HMC7587
Data Sheet
0
0
–2
–2
P1dB (dBm)
–6
–8
–10
–6
–8
–10
–12
–12
–14
–14
–16
81.0
81.5
82.0
82.5
TA = +85°C
TA = +25°C
TA = –55°C
–4
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-206
P1dB (dBm)
–4
Figure 190. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–16
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
Figure 191. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 40 of 55
13141-209
TA = +85°C
TA = +25°C
TA = –55°C
Data Sheet
HMC7587
NOISE FIGURE PERFORMANCE WITH LOWER SIDEBAND SELECTED
10
10
+85°C
+25°C
–55°C
9
8
NOISE FIGURE (dB)
7
6
5
4
3
5
4
1
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
0
81.0
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 192. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Figure 195. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 3 V
10
10
+85°C
+25°C
–55°C
8
9
8
NOISE FIGURE (dB)
7
6
5
4
3
7
6
5
4
2
2
1
1
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
0
81.0
13141-213
81.5
LO
LO
LO
LO
LO
LO
LO
3
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 193. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
13141-216
9
Figure 196. Noise Figure vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
9
+85°C
+25°C
–55°C
9
8
8
NOISE FIGURE (dB)
7
6
5
4
3
7
6
5
4
LO
LO
LO
LO
LO
LO
LO
3
2
2
1
0
81.0
0
81.0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
13141-214
1
Figure 194. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
81.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5
86.0
RF FREQUENCY (GHz)
Figure 197. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 41 of 55
13141-217
0
81.0
LO
LO
LO
LO
LO
LO
LO
3
2
RF FREQUENCY (GHz)
NOISE FIGURE (dB)
6
1
0
81.0
NOISE FIGURE (dB)
7
2
13141-212
NOISE FIGURE (dB)
8
13141-215
9
HMC7587
Data Sheet
1.0
1.0
0.5
0.5
TA = +85°C
TA = +25°C
TA = –55°C
–1.0
–1.5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
–2.0
81.0
0.5
0.5
AMPLITUDE BALANCE (dB)
1.0
0
–0.5
–1.0
TA = +85°C
TA = +25°C
TA = –55°C
–1.5
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 199. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–2.0
81.0
81.5
82.0
82.5
AMPLITUDE BALANCE (dB)
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
Figure 200. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
84.5
85.0
85.5 86.0
TA = +85°C
TA = +25°C
TA = –55°C
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
0
–0.5
–1.0
TA = +85°C
TA = +25°C
TA = –55°C
–1.5
–2.0
81.0
13141-220
–2.0
81.0
84.0
Figure 202. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
0.5
TA = +85°C
TA = +25°C
TA = –55°C
83.5
RF FREQUENCY (GHz)
0.5
–1.0
83.0
–1.0
1.0
–0.5
82.5
–0.5
1.0
0
82.0
0
–1.5
RF FREQUENCY (GHz)
–1.5
81.5
Figure 201. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
1.0
–2.0
81.0
TA = +85°C
TA = +25°C
TA = –55°C
RF FREQUENCY (GHz)
13141-219
AMPLITUDE BALANCE (dB)
Figure 198. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
AMPLITUDE BALANCE (dB)
–1.0
–1.5
13141-218
–2.0
81.0
–0.5
13141-222
–0.5
0
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-223
0
13141-221
AMPLITUDE BALANCE (dB)
AMPLITUDE BALANCE (dB)
AMPLITUDE BALANCE PERFORMANCE WITH LOWER SIDEBAND SELECTED
Figure 203. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 42 of 55
Data Sheet
HMC7587
PHASE BALANCE PERFORMANCE WITH LOWER SIDEBAND SELECTED
10
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
0
–2
–4
–8
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 204. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–10
81.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
Figure 207. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
–8
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
13141-225
81.5
–10
81.0
Figure 205. Phase Balance vs. RF Frequency at Various Temperatures
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
81.5
82.0
82.5
83.0
83.5
84.0
84.5
85.0
85.5 86.0
RF FREQUENCY (GHz)
13141-228
–8
RF FREQUENCY (GHz)
Figure 208. Phase Balance vs. RF Frequency at Various Temperatures
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
8
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
–6
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-226
81.5
–10
81.0
Figure 206. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
81.5
82.0
82.5
83.0
83.5
84.0
84.5
RF FREQUENCY (GHz)
85.0
85.5 86.0
13141-229
–8
–8
–10
81.0
82.0
10
8
–10
81.0
81.5
RF FREQUENCY (GHz)
10
PHASE BALANCE (Degrees)
2
–6
RF FREQUENCY (GHz)
PHASE BALANCE (Degrees)
4
–8
–10
81.0
TA = +85°C
TA = +25°C
TA = –55°C
6
–6
13141-224
PHASE BALANCE (Degrees)
8
13141-227
10
Figure 209. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 43 of 55
HMC7587
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 500 MHz
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.416 GHz
at LOIN = 2 dBm.
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V,
LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.416 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
29.2
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
39
N/A
N/A
4
N/A
N/A
N/A
N/A
57
N/A
5
N/A
N/A
N/A
N/A
N/A
59.7
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.6
N/A
N/A
4
N/A
N/A
N/A
N/A
49.3
N/A
5
N/A
N/A
N/A
N/A
N/A
53.9
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
29.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
43.1
N/A
N/A
4
N/A
N/A
N/A
N/A
61.2
N/A
5
N/A
N/A
N/A
N/A
N/A
63.5
2
N/A
N/A
30.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
41.5
N/A
N/A
4
N/A
N/A
N/A
N/A
59.4
N/A
5
N/A
N/A
N/A
N/A
N/A
64
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.7
N/A
N/A
4
N/A
N/A
N/A
N/A
52.1
N/A
5
N/A
N/A
N/A
N/A
N/A
57.2
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.25 GHz
at LOIN = 2 dBm.
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.25 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.75 MHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.75 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 44 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
30.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
45.4
N/A
N/A
4
N/A
N/A
N/A
N/A
62.9
N/A
5
N/A
N/A
N/A
N/A
N/A
67.3
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7587
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 1000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm.
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.333 GHz
at LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.333 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.4
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.9
N/A
N/A
4
N/A
N/A
N/A
N/A
56.5
N/A
5
N/A
N/A
N/A
N/A
N/A
59.3
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.1
N/A
N/A
4
N/A
N/A
N/A
N/A
52.8
N/A
5
N/A
N/A
N/A
N/A
N/A
56.7
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
42
N/A
N/A
4
N/A
N/A
N/A
N/A
60.2
N/A
5
N/A
N/A
N/A
N/A
N/A
62.7
2
N/A
N/A
29.7
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
41.7
N/A
N/A
4
N/A
N/A
N/A
N/A
58.7
N/A
5
N/A
N/A
N/A
N/A
N/A
63.4
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
39.3
N/A
N/A
4
N/A
N/A
N/A
N/A
55.1
N/A
5
N/A
N/A
N/A
N/A
N/A
60.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.166 GHz
at LOIN = 2 dBm.
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.166 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.666 MHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.666 MHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 45 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
44.2
N/A
N/A
4
N/A
N/A
N/A
N/A
62.1
N/A
5
N/A
N/A
N/A
N/A
N/A
66.6
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7587
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 2000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm.
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.166 GHz
at LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.166 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
42
N/A
N/A
4
N/A
N/A
N/A
N/A
56.3
N/A
5
N/A
N/A
N/A
N/A
N/A
61.1
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.5
N/A
N/A
4
N/A
N/A
N/A
N/A
55.6
N/A
5
N/A
N/A
N/A
N/A
N/A
60.8
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.5
N/A
N/A
4
N/A
N/A
N/A
N/A
52.9
N/A
5
N/A
N/A
N/A
N/A
N/A
52.3
2
N/A
N/A
29.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
45.1
N/A
N/A
4
N/A
N/A
N/A
N/A
58.7
N/A
5
N/A
N/A
N/A
N/A
N/A
65.5
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
41
N/A
N/A
4
N/A
N/A
N/A
N/A
58.6
N/A
5
N/A
N/A
N/A
N/A
N/A
64.7
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14 GHz
at LOIN = 2 dBm
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14 GHz
at LOIN = 2 dBm
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.5 MHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.5 MHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 46 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.7
N/A
N/A
4
N/A
N/A
N/A
N/A
56.5
N/A
5
N/A
N/A
N/A
N/A
N/A
54.2
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7587
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 500 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm.
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.583 GHz
at LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.583 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.5
N/A
N/A
4
N/A
N/A
N/A
N/A
52.8
N/A
5
N/A
N/A
N/A
N/A
N/A
55.9
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.4
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.3
N/A
N/A
4
N/A
N/A
N/A
N/A
49.2
N/A
5
N/A
N/A
N/A
N/A
N/A
55.1
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
44.8
N/A
N/A
4
N/A
N/A
N/A
N/A
59.1
N/A
5
N/A
N/A
N/A
N/A
N/A
64.8
2
N/A
N/A
28.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.6
N/A
N/A
4
N/A
N/A
N/A
N/A
55.6
N/A
5
N/A
N/A
N/A
N/A
N/A
59.8
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40
N/A
N/A
4
N/A
N/A
N/A
N/A
52.1
N/A
5
N/A
N/A
N/A
N/A
N/A
58.3
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.416 GHz
at LOIN = 2 dBm.
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.416 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.916 MHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 13.916 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 47 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
46.5
N/A
N/A
4
N/A
N/A
N/A
N/A
61.6
N/A
5
N/A
N/A
N/A
N/A
N/A
68.5
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7587
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 1000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm.
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.666 GHz
at LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.666 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.1
N/A
N/A
4
N/A
N/A
N/A
N/A
51
N/A
5
N/A
N/A
N/A
N/A
N/A
55.6
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40
N/A
N/A
4
N/A
N/A
N/A
N/A
50.8
N/A
5
N/A
N/A
N/A
N/A
N/A
59.4
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.7
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
42.8
N/A
N/A
4
N/A
N/A
N/A
N/A
56.9
N/A
5
N/A
N/A
N/A
N/A
N/A
68.1
2
N/A
N/A
27.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
39.2
N/A
N/A
4
N/A
N/A
N/A
N/A
53.4
N/A
5
N/A
N/A
N/A
N/A
N/A
59.1
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.4
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
41.8
N/A
N/A
4
N/A
N/A
N/A
N/A
54.9
N/A
5
N/A
N/A
N/A
N/A
N/A
62.9
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.5 GHz
at LOIN = 2 dBm.
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.5 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 14 GHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 14 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 48 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
45.2
N/A
N/A
4
N/A
N/A
N/A
N/A
60.3
N/A
5
N/A
N/A
N/A
N/A
N/A
73.2
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7587
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 2000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm.
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.833 GHz
at LOIN = 2 dBm.
Mixer spurious products are measured in dBc from the IF output
power level. Spur values are (M × RF) − (N × LO). N/A means not
applicable.
M × N Spurious Outputs, VDLNA = 4 V
M × RF
RF = 81 GHz at RFIN = −10 dBm, LO frequency = 13.833 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.3
N/A
N/A
4
N/A
N/A
N/A
N/A
48
N/A
5
N/A
N/A
N/A
N/A
N/A
56.5
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
43.2
N/A
N/A
4
N/A
N/A
N/A
N/A
56.2
N/A
5
N/A
N/A
N/A
N/A
N/A
65.4
6
N/A
N/A
N/A
N/A
N/A
N/A
M × RF
M × RF
0
1
2
3
4
5
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
22.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.1
N/A
N/A
4
N/A
N/A
N/A
N/A
48.1
N/A
5
N/A
N/A
N/A
N/A
N/A
63
2
N/A
N/A
25.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
39.5
N/A
N/A
4
N/A
N/A
N/A
N/A
51.8
N/A
5
N/A
N/A
N/A
N/A
N/A
59.5
6
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
45.6
N/A
N/A
4
N/A
N/A
N/A
N/A
60
N/A
5
N/A
N/A
N/A
N/A
N/A
63.9
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.666 GHz
at LOIN = 2 dBm.
RF = 86 GHz at RFIN = −10 dBm, LO frequency = 14.666 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 14.166 GHz
at LOIN = 2 dBm.
RF = 83 GHz at RFIN = −10 dBm, LO frequency = 14.166 GHz
at LOIN = 2 dBm.
0
N/A
N/A
N/A
N/A
N/A
N/A
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 49 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
23.2
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
42.3
N/A
N/A
4
N/A
N/A
N/A
N/A
51
N/A
5
N/A
N/A
N/A
N/A
N/A
67
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7587
Data Sheet
THEORY OF OPERATION
Quadrature LO signals drive the two I and Q mixer cores. The
LO path provides a 6× multiplier that allows the use of a lower
frequency range LO input signal, typically between 11.83 GHz
and 14.33 GHz. The 6× multiplier is implemented using a cascade
of 3× and 2× multipliers. The LO buffer amplifiers are included
on-chip to allow a typical LO drive level of only 2 dBm for full
performance.
The HMC7587 is a GaAs low noise I/Q downconverter with an
integrated LO buffer and a 6× multiplier. See Figure 210 for a
functional block diagram of the downconverter circuit architecture.
The RF input is internally ac-coupled and matched to 50 Ω. The
input passes through four stages of low noise amplification. The
preamplified RF input signal then splits and drives two singly
balanced passive mixers.
IFIP IFIN
VDAMP2
VGAMP
VDAMP1 VDMULT
×2
VGX3 VGX2 LOIN
×3
VGMIX
AC COUPLING,
MATCHING ELEMENTS,
AND GND BOND PADS NOT ILLUSTRATED.
IFQN IFQP
VDLNA4
VGLNA4 VDLNA3
VGLNA3 VDLNA2
VGLNA2 VDLNA1
Figure 210. Downconverter Circuit Architecture
Rev. A | Page 50 of 55
VGLNA1
13141-230
RFIN
Data Sheet
HMC7587
APPLICATIONS INFORMATION
BIASING SEQUENCE
To power down the HMC7587, follow the procedure in reverse.
The HMC7587 uses several amplifier and multiplier stages. The
active stages all use depletion mode pseudomorphic high electron
mobility transistors (pHEMTs). To ensure transistor damage does
not occur, use the following power-up bias sequence:
For additional guidance on general bias sequencing, see the
MMIC Amplifier Biasing Procedure application note.
1.
2.
3.
4.
5.
6.
IMAGE REJECTION DOWNCONVERSION
A typical image rejection downconversion application circuit is
shown in Figure 211. For image rejection downconversions,
external 180°and 90° hybrid couplers are typically used. The 180°
hybrids or baluns convert the differential I and Q output signals to
unbalanced waveforms. The 90° hybrid then combines the outputs
in quadrature to form a classic Hartley image rejection receiver
with a typical image rejection of 30 dBc.
Apply a −2 V bias to VGAMP, VGLNA1, VGLNA2, VGLNA3, VGLNA4,
VGX2, and VGX3.
Apply a −1 V bias to VGMIX.
Apply 4 V to VDAMP1, VDAMP2, VDLNA1, VDLNA2, VDLNA3, and
VDLNA4, and apply 1.5 V to VDMULT.
Adjust VGAMP between −2 V and 0 V to achieve a total
amplifier drain current (IDAMP1 + IDAMP2) of 175 mA.
Adjust VGLNA1, VGLNA2, VGLNA3, and VGLNA4 to achieve a total
LNA drain current (IDLNA1 + IDLNA2 + IDLNA3 + IDLNA4) of 50 mA.
Apply the LO input signal with a power level of 2 dBm and
adjust VGX2 and VGX3 between −2 V and 0 V to achieve
80 mA of drain current on VDMULT.
VGAMP
120pF
0.01µF
4.7µF
VDAMP1 , VDAMP2
VDMULT
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
VGX2, VGX3
VGMIX
LOIN
13
14
15
16
17
18
19
20
21
LOIN
12
VGX2
11
VGX3
10
VDMULT
9
VDAMP1
8
VGAMP
5
7
VDAMP2
IFIN
6
VGMIX
IFIP
4
180°
HYBRID
×6
IF
OUTPUT
90°
HYBRID
IFQN
IFQP
3
RFIN
2
22
180°
HYBRID
40
39
38
37
36
35
34
33
32
31
30
VGLNA1
VDLNA1
VGLNA2
VDLNA2
VGLNA3
VDLNA3
HMC7587
VDLNA4
1
VGLNA4
23
29
28
27
RF
INPUT
24
26
25
VDLNA3 , VDLNA4
VGLNA1, VGLNA2
0.01µF
120pF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
VDLNA1 , VDLNA2
VGLNA3, VGLNA4
120pF
Figure 211. Typical Image Rejection Downconversion Application Circuit
Rev. A | Page 51 of 55
0.01µF
4.7µF
13141-231
4.7µF
HMC7587
Data Sheet
The HMC7587 I/Q outputs are ground referenced and dc coupling
to a differential signal source with a common-mode output voltage
other than 0 V can cause degraded RF performance and possible
device damage due to electrical overstress.
ZERO IF DIRECT CONVERSION
A typical zero IF direct conversion application circuit is shown
in Figure 212. It is important to ac couple the IFIP, IFIN, IFQP,
and IFQN pads to the ADC inputs. Most ADCs are designed to
operate with a common-mode voltage that is above ground.
VDAMP1 , VDAMP2
VGMIX
120pF
0.01µF
4.7µF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
VGAMP
VDMULT
VGX2, VGX3
LOIN
14
15
16
17
18
19
20
21
LOIN
13
VGX2
12
VGX3
11
VDMULT
10
VDAMP1
IFIN
9
VDAMP2
I ADC
8
VGAMP
5
7
VGMIX
IFIP
6
4
×6
IFQN
3
Q ADC
IFQP
RFIN
2
22
VDLNA3 , VDLNA4
VGLNA3, VGLNA4
4.7µF
0.01µF
120pF
4.7µF
0.01µF
120pF
39
38
37
36
34
33
32
31
30
VGLNA1
VDLNA1
VGLNA2
VDLNA2
VGLNA3
35
29
28
27
26
24
25
120pF
120pF
Figure 212. Typical Zero IF Direct Conversion Application Circuit
Rev. A | Page 52 of 55
RF
INPUT
0.01µF
0.01µF
4.7µF
4.7µF
VGLNA1, VGLNA2
VDLNA1 , VDLNA2
13141-232
40
VDLNA3
HMC7587
VDLNA4
1
VGLNA4
23
Data Sheet
HMC7587
ASSEMBLY DIAGRAM
VGMIX
VDAMP1 ,
VDAMP2
VGAMP
VDMULT
VGX2,
VGX3
4.7µF
4.7µF
4.7µF
4.7µF
4.7µF
0.01µF
1mil
GOLD WIRE
(WEDGE BOND)
3mil
NOMINAL GAP
120pF
LOIN
IFIP
IFIN
IFQN
IFQP
RFIN
50Ω
TRANSMISSION
LINE
120pF
1mil
GOLD WIRE
(WEDGE BOND)
3mil WIDE
GOLD RIBBON
(WEDGE BOND)
0.01µF
4.7µF
VDLNA4
VGLNA4
4.7µF
4.7µF
VDLNA1 , VDLNA2 , VGLNA1, VGLNA2,
VDLNA3
VGLNA3
Figure 213. Assembly Diagram
Rev. A | Page 53 of 55
13141-234
4.7µF
HMC7587
Data Sheet
MOUNTING AND BONDING TECHNIQUES FOR MILLIMETERWAVE GaAs MMICS
Attach the die directly to the ground plane eutectically or with
conductive epoxy.
To bring RF to and from the chip, use 50 Ω microstrip transmission lines on 0.127 mm (5 mil) thick alumina thin film
substrates (see Figure 214).
General Handling
Handle the chip on the edges only using a vacuum collet or with
a sharp pair of bent tweezers. Because the surface of the chip has
fragile air bridges, never touch the surface of the chip with a
vacuum collet, tweezers, or fingers.
MOUNTING
0.05mm (0.002") THICK GaAs MMIC
The chip is back metallized and can be die mounted with gold/
tin (AuSn) eutectic preforms or with electrically conductive epoxy.
The mounting surface must be clean and flat.
WIRE BOND
0.076mm
(0.003")
Eutectic Die Attach
It is best to use an 80%/20% gold/tin preform with a work surface
temperature of 255°C and a tool temperature of 265°C. When
hot 90%/10% nitrogen/hydrogen gas is applied, maintain the tool
tip temperature at 290°C. Do not expose the chip to a temperature
greater than 320°C for more than 20 sec. No more than 3 sec of
scrubbing is required for attachment.
0.127mm (0.005") THICK ALUMINA
THIN FILM SUBSTRATE
13141-235
RF GROUND PLANE
Figure 214. Routing RF Signals
To minimize bond wire length, place microstrip substrates as
close to the die as possible. Typical die to substrate spacing is
0.076 mm to 0.152 mm (3 mil to 6 mil).
HANDLING PRECAUTIONS
To avoid permanent damage, adhere to the following precautions.
Storage
All bare die ship in either waffle or gel-based ESD protective
containers, sealed in an ESD protective bag. After opening the
sealed ESD protective bag, all die must be stored in a dry
nitrogen environment.
Cleanliness
Handle the chips in a clean environment. Never use liquid
cleaning systems to clean the chip.
Static Sensitivity
Follow ESD precautions to protect against ESD strikes.
Transients
Epoxy Die Attach
ABLEBOND 84-1LMIT is recommended for die attachment.
Apply a minimum amount of epoxy to the mounting surface so
that upon placing it into position, a thin epoxy fillet is observed
around the perimeter of the chip. Cure epoxy per the schedule
provided by the manufacturer.
WIRE BONDING
RF bonds made with (3 mil (0.0762 mm) × 0.5 mil (0.0127 mm)
gold ribbon are recommended for the RF ports and wedge bonds
with 1 mil (0.0254 mm) diameter gold wire are recommended for
the IF and LO ports. These bonds must be thermosonically bonded
with a force of 40 g to 60 g. DC bonds of 1 mil (0.0254 mm)
diameter, thermosonically bonded, are recommended. Create ball
bonds with a force of 40 g to 50 g and wedge bonds at 18 g to 22 g.
Create all bonds with a nominal stage temperature of 150°C.
Apply a minimum amount of ultrasonic energy to achieve reliable
bonds. Keep all bonds as possible, less than 12 mils (0.31 mm).
Suppress instrument and bias supply transients while bias is
applied. To minimize inductive pickup, use shielded signal and
bias cables.
Rev. A | Page 54 of 55
Data Sheet
HMC7587
OUTLINE DIMENSIONS
3.599
0.290
0.510
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
0.474
0.151
0.058
6
5
0.307
7
8
9
10
11 12 13 14 15 16 17 18 19 20
21
0.162
4
0.648
2.199
3
0.307
2
22
0.500
23
24
1
0.210
0.095
31 30 29 28 27 26 25
0.274
0.114
0.318
1.055
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
TOP VIEW
(CIRCUIT SIDE)
04-10-2015-A
0.085
40 39 38 37 36 35 34 33 32
0.130
0.130
Figure 215. 40-Pad Bare Die [CHIP]
(C-40-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
HMC7587
HMC7587-SX
1
2
Temperature Range
−55°C to +85°C
−55°C to +85°C
Package Description
40-Pad Bare Die [CHIP]
40-Pad Bare Die [CHIP]
The HMC7587-SX consists of two pairs of the die in a gel pack for sample orders.
This is a waffle pack option; contact Analog Devices, Inc., for additional packaging options.
©2016 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13141-0-3/16(A)
Rev. A | Page 55 of 55
Package Option2
C-40-1
C-40-1