71 GHz to 76 GHz,
E-Band I/Q Downconverter
HMC7586
Data Sheet
FEATURES
GENERAL DESCRIPTION
Conversion gain: 12.5 dB typical
Image rejection: 28 dBc typical
Noise figure: 5 dB typical
Input power for 1 dB compression (P1dB): −9 dBm typical
Input third-order intercept (IP3): −1 dBm typical
Input second-order intercept (IP2): 20 dBm typical
6× local oscillator (LO) leakage at RFIN: −40 dBm typical
1× LO leakage at IFOUT: −50 dBm typical
Radio frequency (RF) return loss: 5 dB typical
LO return loss: 20 dB typical
Die size: 3.599 mm × 2.199 mm × 0.05 mm
The HMC7586 is an integrated E-band gallium arsenide (GaAs),
monolithic microwave integrated circuit (MMIC) in-phase/
quadrature (I/Q) downconverter chip that operates from 71 GHz to
76 GHz. The HMC7586 provides a small signal conversion gain
of 12.5 dB with 28 dBc of image rejection across the frequency
band. The device uses a low noise amplifier followed by an
image rejection mixer that is driven by a 6× LO multiplier.
The image rejection mixer eliminates the need for a filter
following the low noise amplifier. Differential I and Q mixer
outputs are provided for direct conversion applications.
Alternatively, the outputs can be combined using an external
90° hybrid and two external 180° hybrids for single-sideband
applications. All data includes the effect of a 1 mil gold wire
wedge bond on the intermediate frequency (IF) ports.
APPLICATIONS
E-band communication systems
High capacity wireless backhauls
Test and measurement
FUNCTIONAL BLOCK DIAGRAM
14
15
16
17
18
19
20
21
LOIN
13
VDAMP1
12
VGX2
11
VGX3
10
VDMULT
9
VDAMP2
8
VGAMP
7
VGMIX
6
IFIP 5
IFIN 4
6×
IFQN 3
RFIN
IFQP 2
22
39
38
37
36
34
33
32
31
30
VGLNA1
VDLNA1
VGLNA2
VDLNA2
VGLNA3
35
29
28
27
26
24
25
13128-001
40
VDLNA3
HMC7586
VDLNA4
1
VGLNA4
23
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC7586
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1 Applications ....................................................................................... 1 General Description ......................................................................... 1 Functional Block Diagram .............................................................. 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 4 Thermal Resistance ...................................................................... 4 ESD Caution .................................................................................. 4 Pin Configuration and Function Descriptions ............................. 5 Interface Schematics..................................................................... 6 Typical Performance Characteristics ............................................. 7 Lower Sideband Selected, IF = 1000 MHz ................................ 7 Return Loss Performance .......................................................... 12 Lower Sideband Selected, IF = 500 MHz ................................ 13 Lower Sideband Selected, IF = 2000 MHz .............................. 18 Noise Figure Performance, Lower Sideband Selected ........... 23 Spurious Performance With Lower Sideband Selected, IF =
500 MHz ...................................................................................... 44 Spurious Performance With Lower Sideband Selected, IF =
1000 MHz .................................................................................... 45 Spurious Performance With Lower Sideband Selected, IF =
2000 MHz .................................................................................... 46 Spurious Performance with Upper Sideband Selected, IF =
500 MHz ...................................................................................... 47 Spurious Performance with Upper Sideband Selected, IF =
1000 MHz .................................................................................... 48 Spurious Performance with Upper Sideband Selected, IF =
2000 MHz .................................................................................... 49 Theory of Operation ...................................................................... 50 Applications Information .............................................................. 51 Biasing Sequence ........................................................................ 51 Image Rejection Downconversion ........................................... 51 Zero IF Direct Conversion ........................................................ 52 Assembly Diagram ..................................................................... 53 Amplitude Balance Performance, Lower Sideband Selected 24 Mounting and Bonding Techniques for Millimeterwave GaAs
MMICs ............................................................................................. 54 Phase Balance Performance, Lower Sideband Selected ........ 25 Handling Precautions ................................................................ 54 Upper Sideband Selected, IF = 500 MHz ................................ 26 Mounting ..................................................................................... 54 Upper Sideband Selected, IF = 1000 MHz .............................. 31 Wire Bonding.............................................................................. 54 Upper Sideband Selected, IF = 2000 MHz .............................. 36 Outline Dimensions ....................................................................... 55 Noise Figure Performance, Upper Sideband Selected ........... 41 Ordering Guide .......................................................................... 55 Amplitude Balance Performance, Upper Sideband Selected 42 Phase Balance Performance, Upper Sideband Selected ........ 43 REVISION HISTORY
3/16—Revision A: Initial Version
Rev. A | Page 2 of 55
Data Sheet
HMC7586
SPECIFICATIONS
TA = 25°C, IF = 1000 MHz, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, voltage on the VDLNAx pins (VDLNA) = 3 V, LO = 2 dBm, lower
sideband selected. Measurements performed as a downconverter with external 90° and 180° hybrids at the IF ports, unless otherwise
noted.
Table 1.
Parameter
OPERATING CONDITIONS
RF Frequency Range
LO Frequency Range
IF Frequency Range
LO Drive Range
PERFORMANCE
Conversion Gain
Image Rejection
Input Third-Order Intercept (IP3)
Input Second-Order Intercept (IP2)
Input Power for 1 dB Compression (P1dB)
6× LO Leakage at RF Input (RFIN)
1× LO Leakage at IF Output (IFOUT)
Amplitude Balance 1
Phase Balance1
Noise Figure
RF Return Loss
LO Return Loss
IF Return Loss1
POWER SUPPLY
Supply Current
IDAMP 2
IDMULT 3
IDLNA 4
Test Conditions/Comments
Min
Typ
71
11.83
0
2
8
20
VDLNAx = 4 V
VDLNAx = 4 V
VDLNAx = 4 V
Under LO drive
Max
Unit
76
14.33
10
8
GHz
GHz
GHz
dBm
12.5
28
−1
20
−9
−40
−50
−0.4
±4
5
5
20
25
dB
dBc
dBm
dBm
dBm
dBm
dBm
dB
Degrees
dB
dB
dB
dB
175
80
50
mA
mA
mA
Measurements performed without external hybrids at the IF ports.
Adjust VGAMP between −2 V and 0 V to achieve the total quiescent current, IDAMP = IDAMP1 + IDAMP2 = 175 mA.
3
Adjust VGX2 and VGX3 between −2 V and 0 V to achieve the total quiescent current, IDMULT = 1 mA to 2 mA. See the Applications Information section for more information.
4
Adjust VGLNAx between −2 V and 0 V to achieve the total quiescent current, IDLNA1 + IDLNA2 + IDLNA3 + IDLNA4 = 50 mA.
1
2
Rev. A | Page 3 of 55
HMC7586
Data Sheet
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 2.
Parameter
Drain Bias Voltage
VDAMP1, VDAMP2
VDMULT
VDLNA1, VDLNA2, VDLNA3, VDLNA4
Gate Bias Voltage
VGAMP
VGX2, VGX3
VGLNA1, VGLNA2, VGLNA3, VGLNA4
VGMIX
LO Input Power
Maximum Junction Temperature (to
Maintain 1 Million Hours Mean Time to
Failure (MTTF))
Storage Temperature Range
Operating Temperature Range
ESD Sensitivity, Human Body Model (HBM)
Table 3. Thermal Resistance
Rating
Package Type
40-Pad Bare Die [CHIP]
4.5 V
3V
4.5 V
1
Unit
°C/W
Based on ABLEBOND® 84-1LMIT as die attach epoxy with a thermal
conductivity of 3.6 W/mK.
ESD CAUTION
−3 V to 0 V
−3 V to 0 V
−3 V to 0 V
−3 V to 0 V
10 dBm
175°C
θJC1
61.7
−65°C to +150°C
−55°C to +85°C
100 V (Class 0)
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Rev. A | Page 4 of 55
Data Sheet
HMC7586
18
19
GND
20
21
GND
17
LOIN
16
GND
15
VGX2
14
GND
13
VGX3
12
GND
11
VDMULT
10
GND
GND
9
VDAMP1
8
GND
7
VGAMP
6
VDAMP2
IFIP 5
VGMIX
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
IFIN 4
HMC7586
IFQN 3
IFQP 2
GND 22
GND
VGLNA1
30
29
28
27
26
25
13128-002
VDLNA1
31
GND 24
GND
GND
32
GND
33
VGLNA2
34
GND
35
VDLNA2
36
GND
37
VGLNA3
38
GND
39
VDLNA3
40
GND
GND
VGLNA4
1
VDLNA4
RFIN 23
Figure 2. Pad Configuration
Table 4. Pad Function Descriptions
Pad No.
1, 7, 9, 11, 13, 15, 17,
19, 21, 22, 24, 25, 27,
29, 31, 33, 35, 37, 39
Mnemonic
GND
Description
Ground Connect. See Figure 3.
2, 3
IFQP, IFQN
4, 5
IFIN, IFIP
6
VGMIX
8, 12
VDAMP2, VDAMP1
10
VGAMP
14
VDMULT
16, 18
VGX3, VGX2
20
23
26, 30, 34, 38
LOIN
RFIN
VGLNA1, VGLNA2,
VGLNA3, VGLNA4
VDLNA1, VDLNA2,
VDLNA3, VDLNA4
GND
Positive and Negative IF Q Outputs. These pads are dc-coupled. When operation to dc is not
required, block these pads externally using a series capacitor with a value chosen to pass the
necessary frequency range. For operation to dc, these pads must not source or sink more than 3
mA of current or die malfunction and die failure may result (see Figure 4).
Negative and Positive IF I Outputs. These pads are dc-coupled. When operation to dc is not
required, block these pads externally using a series capacitor with a value chosen to pass the
necessary frequency range. For operation to dc, these pads must not source or sink more than 3
mA of current or die malfunction and die failure may result (see Figure 4).
Gate Voltage for the FET Mixer. See Figure 5. Refer to the typical application circuit for required
external components (see Figure 211).
Power Supply Voltage for the First and the Second Stage LO Amplifier. See Figure 5. Refer to the
typical application circuit for required external components (see Figure 211).
Gate Voltage for the First and the Second Stage LO Amplifier. See Figure 5. Refer to the typical
application circuit for required external components (see Figure 211).
Power Supply Voltage for the LO Multiplier. See Figure 5. Refer to the typical application circuit for
required external components (see Figure 211).
Gate Voltage for the LO Multiplier. See Figure 5. Refer to the typical application circuit for required
external components (see Figure 211).
Local Oscillator Input. This pad is dc-coupled and matched to 50 Ω (see Figure 6).
RF Input. This pad is ac-coupled and matched to 50 Ω (see Figure 7).
Gate Voltage for the Low Noise Amplifier. See Figure 8. Refer to the typical application circuit for
required external components (see Figure 211).
Power Supply Voltage for the Low Noise Amplifier. See Figure 8. Refer to the typical application
circuit for required external components (see Figure 211).
Ground. Die bottom must be connected to RF/dc ground (see Figure 3).
28, 32, 36, 40
Die Bottom
Rev. A | Page 5 of 55
HMC7586
Data Sheet
INTERFACE SCHEMATICS
13128-006
13128-003
LOIN
GND
Figure 6. LOIN Interface
Figure 3. GND Interface
200Ω
RFIN
Figure 7. RFIN Interface
Figure 4. IFIP, IFIN, IFQN, IFQP, and VGMIX Interface
VDLNA1 , VDLNA2 ,
VDLNA3 , VDLNA4
VDAMP1 , VDAMP2 ,
VDMULT
13128-005
Figure 5. VDAMP1, VDAMP2, VDMULT, VGAMP, VGMIX, VGX2, and VGX3 Interface
VGLNA1, VGLNA2,
VGLNA3, VGLNA4
13128-008
100Ω
100Ω
VGMIX, VGAMP,
VGX2, VGX3
13128-007
13128-004
IFIN, IFIP,
IFQN, IFQP
Figure 8. VDLNA1, VDLNA2, VDLNA3, VDLNA4, VGLNA1, VGLNA2, VGLNA3, and VGLNA4
Interface
Rev. A | Page 6 of 55
Data Sheet
HMC7586
TYPICAL PERFORMANCE CHARACTERISTICS
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
14
14
12
12
CONVERSION GAIN (dB)
16
10
8
6
4
2
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
LO
LO
LO
LO
LO
LO
LO
6
4
75.0
75.5 76.0
13128-011
74.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
–4
–8
–16
74.0
72.5
0
–16
73.5
72.0
4
–12
73.0
71.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
8
–12
RF FREQUENCY (GHz)
75.5 76.0
12
0
72.5
75.0
16
–4
72.0
74.5
20
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
71.5
74.0
Figure 13. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
8
–20
71.0
73.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
12
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.0
8
0
71.0
Figure 10. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
20
72.5
10
2
73.0
72.0
Figure 12. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
16
LO
LO
LO
LO
LO
LO
LO
71.5
RF FREQUENCY (GHz)
13128-010
CONVERSION GAIN (dB)
Figure 9. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13128-013
71.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
6
2
13128-009
0
71.0
8
13128-012
2
10
–20
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
71.5
72.0
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 14. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
Figure 11. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
Rev. A | Page 7 of 55
13128-014
CONVERSION GAIN (dB)
LOWER SIDEBAND SELECTED, IF = 1000 MHz
HMC7586
Data Sheet
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–32
–36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 15. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–40
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 18. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
–8
–20
–24
–28
–12
–16
–20
–24
–28
–32
–32
–36
–36
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–40
71.0
13128-016
71.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
–20
–24
–28
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-017
74.5
75.0
75.5 76.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–24
–28
–36
74.0
74.5
–20
–36
73.5
74.0
–16
–32
73.0
73.5
–12
–32
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–16
72.0
72.5
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–12
71.5
72.0
Figure 19. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
0
71.5
RF FREQUENCY (GHz)
Figure 16. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
–4
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
13128-019
–16
LO
LO
LO
LO
LO
LO
LO
–4
–40
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 20. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Figure 17. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
Rev. A | Page 8 of 55
13128-020
–12
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–8
–40
71.0
72.0
0
LO
LO
LO
LO
LO
LO
LO
–4
–40
71.0
71.5
RF FREQUENCY (GHz)
0
IMAGE REJECTION (dBc)
–16
–36
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
71.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13128-015
IMAGE REJECTION (dBc)
–8
13128-018
–4
Data Sheet
HMC7586
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
IP3 (dBm)
2
0
–2
–2
–6
–6
–8
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
10
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
4
0
–2
2
0
–4
–6
–6
–8
–8
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
13128-022
72.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 22. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
10
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–2
–4
71.5
LO
LO
LO
LO
LO
LO
LO
6
13128-025
LO
LO
LO
LO
LO
LO
LO
6
IP3 (dBm)
8
Figure 25. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
10
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
2
2
IP3 (dBm)
4
0
–2
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
0
–4
–6
–6
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
–2
–4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 23. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 26. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 9 of 55
13128-026
–8
13128-023
–10
71.0
72.0
Figure 24. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
–10
71.0
71.5
RF FREQUENCY (GHz)
Figure 21. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP3 (dBm)
0
–4
–10
71.0
IP3 (dBm)
2
–4
13128-021
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
13128-024
8
HMC7586
Data Sheet
40
40
36
36
28
IP2 (dBm)
24
20
16
16
12
8
4
4
0
71.0
0
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
40
28
24
32
28
20
16
24
16
12
8
8
4
4
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-028
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
20
12
71.5
LO
LO
LO
LO
LO
LO
LO
36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-031
32
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
36
Figure 31. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
Figure 28. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
40
36
36
32
32
28
28
24
24
IP2 (dBm)
40
20
16
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
20
16
12
12
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
8
4
Figure 29. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
0
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 32. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 10 of 55
13128-032
4
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
13128-029
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
0
71.0
72.0
Figure 30. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
40
0
71.0
71.5
RF FREQUENCY (GHz)
Figure 27. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
RF FREQUENCY (GHz)
IP2 (dBm)
24
12
13128-027
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-030
TA = +85°C
TA = +25°C
TA = –55°C
32
Data Sheet
HMC7586
0
0
–2
–4
–6
P1dB (dBm)
–8
–10
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–14
71.0
13128-033
–16
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 33. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
13128-036
–12
–14
Figure 36. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 1000 MHz, VDLNA = 4 V
–30
–20
TA = +85°C
TA = +25°C
TA = –55°C
–35
TA = +85°C
TA = +25°C
TA = –55°C
–25
–40
–45
–50
–55
–35
–40
–45
–60
–50
–65
–55
–70
11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0
1× LO FREQUENCY (GHz)
–60
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
6× LO FREQUENCY (GHz)
Figure 34. LO Leakage at IFOUT vs. 1× LO Frequency
at Various Temperatures, LO = 2 dBm, VDLNA = 3 V
13128-037
LEAKAGE (dBm)
–30
13128-034
LEAKAGE (dBm)
–8
–10
–12
Figure 37. 6× LO Leakage at RFIN vs. 6× LO Frequency at Various
Temperatures, LO = 2 dBm, VDLNA = 3 V
–30
–20
LO
LO
LO
LO
LO
LO
–35
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
–30
–45
–50
–55
–40
–45
–65
–55
–70
11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0
–60
71.0
13128-035
–50
Figure 35. LO Leakage at IFOUT vs. 1× LO Frequency at Various LO Powers,
VDLNA = 3 V
= 0dBm
= 2dBm
= 4dBm
= 6dBm
= 8dBm
–35
–60
1× LO FREQUENCY (GHz)
LO
LO
LO
LO
LO
–25
LEAKAGE (dBm)
–40
LEAKAGE (dBm)
–6
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
71.5
72.0
72.5
73.0
73.5
74.0
74.5
6× LO FREQUENCY (GHz)
75.0
75.5 76.0
13128-038
P1dB (dBm)
–4
LO
LO
LO
LO
LO
LO
LO
–2
TA = +85°C
TA = +25°C
TA = –55°C
Figure 38. 6× LO Leakage at RFIN vs. 6× LO Frequency at Various LO Powers,
VDLNA = 3 V
Rev. A | Page 11 of 55
HMC7586
Data Sheet
RETURN LOSS PERFORMANCE
0
0
TA = +85°C
TA = +25°C
TA = –55°C
–2
–4
RETURN LOSS (dB)
–6
–8
–10
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 39. RF Return Loss vs. RF Frequency at Various Temperatures,
LO = 2 dBm, LO = 12 GHz, VDLNA = 4 V
–8
–10
–14
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 42. RF Return Loss vs. RF Frequency at Various Temperatures,
LO = 2 dBm, LO = 12 GHz, VDLNA = 3 V
0
TA = +85°C
TA = +25°C
TA = –55°C
–4
LO
LO
LO
LO
LO
LO
LO
–4
–8
–8
RETURN LOSS (dB)
–12
–16
–20
–24
–28
–12
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–16
–20
–24
–28
–32
–32
–36
–40
–40
11.50 11.75 12.00 12.25 12.50 12.75 13.00 13.25 13.50 13.75 14.00 14.25 14.50
LO FREQUENCY (GHz)
13128-040
–36
Figure 40. LO Return Loss vs. LO Frequency at Various Temperatures,
LO = 2 dBm, VDLNA = 4 V
0
IFIP
IFIN
IFQN
IFQP
–5
–10
–15
–20
–25
–30
1.1
2.1
3.1
4.1
5.1
6.1
IF FREQUENCY (GHz)
7.1
8.1
9.1
10.1
13128-041
–35
–40
0.1
71.5
RF FREQUENCY (GHz)
0
RETURN LOSS (dB)
–6
13128-042
72.0
13128-039
71.5
RF FREQUENCY (GHz)
RETURN LOSS (dB)
–4
–12
–12
–14
71.0
TA = +85°C
TA = +25°C
TA = –55°C
Figure 41. IF Return Loss vs. IF Frequency, LO = 2 dBm, LO = 12 GHz, VDLNA = 4 V
Rev. A | Page 12 of 55
11.50 11.75 12.00 12.25 12.50 12.75 13.00 13.25 13.50 13.75 14.00 14.25 14.50
LO FREQUENCY (GHz)
Figure 43. LO Return Loss vs. LO Frequency at Various LO Powers,
VDLNA = 4 V
13128-043
RETURN LOSS (dB)
–2
Data Sheet
HMC7586
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
10
8
6
2
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 44. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
14
14
12
12
CONVERSION GAIN (dB)
16
8
LO
LO
LO
LO
LO
LO
LO
6
4
2
0
71.0
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
12
12
CONVERSION GAIN (dB)
16
8
4
0
–4
–8
–20
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
=
=
=
=
=
75.0
75.5 76.0
Figure 46. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
74.5
75.0
75.5 76.0
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
8
4
0
–4
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–12
30mA
35mA
40mA
45mA
50mA
RF FREQUENCY (GHz)
74.0
Figure 48. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
16
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
RF FREQUENCY (GHz)
–16
–20
71.0
13128-046
CONVERSION GAIN (dB)
4
20
–16
LO
LO
LO
LO
LO
LO
LO
6
20
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
73.0
8
0
71.0
Figure 45. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
–12
72.5
10
2
73.0
72.0
Figure 47. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
16
10
71.5
RF FREQUENCY (GHz)
13128-045
CONVERSION GAIN (dB)
0
71.0
13128-048
72.0
13128-044
71.5
13128-047
2
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
71.5
72.0
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 49. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 13 of 55
13128-049
CONVERSION GAIN (dB)
LOWER SIDEBAND SELECTED, IF = 500 MHz
HMC7586
Data Sheet
0
0
–4
–4
IMAGE REJECTION (dBc)
–16
–20
–24
–28
–12
–16
–20
–24
–28
–32
–32
–36
–36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–40
71.0
Figure 50. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 53. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
–8
–24
–28
–12
–16
–20
–24
–28
–32
–32
–36
–36
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–40
71.0
0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
–20
–24
–28
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 52. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
75.5 76.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–28
–40
71.0
13128-052
74.5
75.0
–24
–36
74.0
74.5
–20
–32
73.5
74.0
–16
–36
73.0
73.5
–12
–32
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–16
72.0
72.5
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–12
71.5
72.0
Figure 54. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
71.5
RF FREQUENCY (GHz)
Figure 51. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
–4
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
13128-054
–20
71.5
LO
LO
LO
LO
LO
LO
LO
–4
IMAGE REJECTION (dBc)
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
13128-051
IMAGE REJECTION (dBc)
–8
IMAGE REJECTION (dBc)
72.5
0
LO
LO
LO
LO
LO
LO
LO
–12
–40
71.0
72.0
RF FREQUENCY (GHz)
0
–4
–40
71.0
71.5
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 55. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 14 of 55
13128-055
–40
71.0
13128-050
IMAGE REJECTION (dBc)
–12
TA = +85°C
TA = +25°C
TA = –55°C
–8
13128-053
TA = +85°C
TA = +25°C
TA = –55°C
–8
Data Sheet
HMC7586
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-056
71.5
–10
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 59. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
0
–4
–6
–6
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–2
–4
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
13128-057
71.5
–10
71.0
71.5
72.0
72.5
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
73.5
74.0
74.5
75.0
75.5 76.0
Figure 60. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
Figure 57. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
10
73.0
RF FREQUENCY (GHz)
13128-060
–8
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
4
2
2
IP3 (dBm)
4
0
–2
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–2
–4
–6
–6
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
0
–4
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
13128-058
–10
71.0
72.0
RF FREQUENCY (GHz)
Figure 56. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–10
71.0
71.5
13128-059
–8
–8
IP3 (dBm)
0
–2
–4
–10
71.0
IP3 (dBm)
2
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 58. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
Figure 61. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 15 of 55
13128-061
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
HMC7586
Data Sheet
40
40
36
36
28
IP2 (dBm)
24
20
16
16
12
8
4
4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
40
28
24
32
28
20
16
24
16
12
8
8
4
4
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-063
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
20
12
71.5
LO
LO
LO
LO
LO
LO
LO
36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 63. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
13128-066
32
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
36
Figure 66. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
40
36
36
32
32
28
28
24
24
IP2 (dBm)
40
20
16
20
16
12
4
71.5
72.0
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
4
13128-064
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
Figure 64. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
0
71.0
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 67. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 16 of 55
13128-067
12
0
71.0
72.0
Figure 65. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
40
0
71.0
71.5
RF FREQUENCY (GHz)
Figure 62. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
0
71.0
IP2 (dBm)
24
12
13128-062
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-065
TA = +85°C
TA = +25°C
TA = –55°C
32
Data Sheet
HMC7586
0
0
–2
–4
P1dB (dBm)
–6
–8
–10
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 68. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–14
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 69. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 4 V
Rev. A | Page 17 of 55
13128-071
–12
–14
–16
71.0
–6
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–10
–12
13128-068
P1dB (dBm)
–4
LO
LO
LO
LO
LO
LO
LO
–2
TA = +85°C
TA = +25°C
TA = –55°C
HMC7586
Data Sheet
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
14
14
12
12
CONVERSION GAIN (dB)
16
8
LO
LO
LO
LO
LO
LO
LO
6
4
2
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
73.0
73.5
74.0
74.5
75.0
75.5 76.0
8
LO
LO
LO
LO
LO
LO
LO
6
4
0
71.0
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 71. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 74. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
20
20
16
12
12
CONVERSION GAIN (dB)
16
8
4
0
–4
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–16
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
74.5
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.0
75.5 76.0
RF FREQUENCY (GHz)
8
4
0
–4
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–12
–16
13128-076
–12
–20
71.0
72.5
10
2
73.0
72.0
Figure 73. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
16
10
71.5
RF FREQUENCY (GHz)
13128-075
CONVERSION GAIN (dB)
Figure 70. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13128-078
71.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
6
2
13128-074
0
71.0
8
13128-077
2
10
Figure 72. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
–20
71.0
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 75. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 18 of 55
13128-079
CONVERSION GAIN (dB)
LOWER SIDEBAND SELECTED, IF = 2000 MHz
Data Sheet
HMC7586
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–36
–36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 76. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–40
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 79. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
–8
–20
–24
–28
–12
–16
–20
–24
–28
–32
–32
–36
–36
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–40
71.0
13128-081
71.5
0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
–20
–24
–28
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-082
74.5
75.0
75.5 76.0
Figure 78. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–24
–28
–36
74.0
74.5
–20
–36
73.5
74.0
–16
–32
73.0
73.5
–12
–32
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–16
72.0
72.5
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–12
71.5
72.0
Figure 80. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
–8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
71.5
RF FREQUENCY (GHz)
Figure 77. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
–4
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
13128-084
–16
LO
LO
LO
LO
LO
LO
LO
–4
–40
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 81. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 19 of 55
13128-085
–12
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
IMAGE REJECTION (dBc)
–8
–40
71.0
72.0
0
LO
LO
LO
LO
LO
LO
LO
–4
–40
71.0
71.5
RF FREQUENCY (GHz)
0
IMAGE REJECTION (dBc)
–16
–32
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
71.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13128-080
IMAGE REJECTION (dBc)
–8
13128-083
–4
HMC7586
Data Sheet
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
13128-086
71.5
–10
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 85. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
–2
–4
–6
–6
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–4
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
13128-087
71.5
–10
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
10
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
6
2
IP3 (dBm)
2
0
–2
–6
–8
–8
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-088
–6
73.5
74.0
74.5
75.0
75.5 76.0
Figure 84. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–2
–4
73.0
73.5
0
–4
72.5
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
4
72.0
72.5
Figure 86. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
4
71.5
72.0
RF FREQUENCY (GHz)
Figure 83. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
10
71.5
13128-090
–8
RF FREQUENCY (GHz)
–10
71.0
72.0
RF FREQUENCY (GHz)
Figure 82. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–10
71.0
71.5
13128-089
–8
RF FREQUENCY (GHz)
IP3 (dBm)
0
–2
–4
–10
71.0
IP3 (dBm)
2
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 87. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 20 of 55
13128-091
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
Data Sheet
HMC7586
40
40
36
36
28
IP2 (dBm)
24
20
16
16
12
8
4
4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
36
36
32
32
28
28
24
24
IP2 (dBm)
40
20
16
12
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
73.0
73.5
74.0
74.5
75.0
75.5 76.0
20
LO
LO
LO
LO
LO
LO
LO
16
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
13128-093
71.5
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-096
4
RF FREQUENCY (GHz)
Figure 92. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
Figure 89. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
40
36
36
32
32
28
28
24
24
IP2 (dBm)
40
20
16
20
16
12
4
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
4
13128-094
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
0
71.0
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 93. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Figure 90. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Rev. A | Page 21 of 55
13128-097
12
0
71.0
72.5
12
4
0
71.0
72.0
Figure 91. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
40
LO
LO
LO
LO
LO
LO
LO
71.5
RF FREQUENCY (GHz)
Figure 88. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
0
71.0
IP2 (dBm)
24
12
13128-092
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-095
TA = +85°C
TA = +25°C
TA = –55°C
32
HMC7586
Data Sheet
0
0
–2
–4
P1dB (dBm)
–6
–8
–10
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 94. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–14
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 95. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 4 V
Rev. A | Page 22 of 55
13128-101
–12
–14
–16
71.0
–6
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–10
–12
13128-098
P1dB (dBm)
–4
LO
LO
LO
LO
LO
LO
LO
–2
TA = +85°C
TA = +25°C
TA = –55°C
Data Sheet
HMC7586
NOISE FIGURE PERFORMANCE, LOWER SIDEBAND SELECTED
8
NOISE FIGURE (dB)
7
6
5
4
3
4
3
1
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
NOISE FIGURE (dB)
4
3
74.5
75.0
75.5 76.0
5
4
3
2
1
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-105
72.0
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
1
71.5
LO
LO
LO
LO
LO
LO
7
2
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 100. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 1000 MHz, VDLNA = 3 V
Figure 97. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
TA = +85°C
TA = +25°C
TA = –55°C
8
NOISE FIGURE (dB)
6
5
4
3
7
5
4
3
1
1
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-106
2
72.0
Figure 98. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
2
71.5
LO
LO
LO
LO
LO
LO
9
7
0
71.0
74.0
8
5
8
73.5
9
6
9
73.0
10
TA = +85°C
TA = +25°C
TA = –55°C
7
0
71.0
72.5
13128-108
8
72.0
Figure 99. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 3 V
10
9
71.5
RF FREQUENCY (GHz)
Figure 96. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
NOISE FIGURE (dB)
5
1
71.5
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
2
0
71.0
NOISE FIGURE (dB)
7
2
13128-104
NOISE FIGURE (dB)
8
LO
LO
LO
LO
LO
LO
9
0
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 101. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 23 of 55
13128-109
9
10
TA = +85°C
TA = +25°C
TA = –55°C
13128-107
10
HMC7586
Data Sheet
AMPLITUDE BALANCE PERFORMANCE, LOWER SIDEBAND SELECTED
1.0
1.0
0.8
0.2
0
–0.2
–0.4
0
–0.2
–0.4
–0.8
–0.8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 102. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–1.0
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
1.0
0.8
0.2
0
–0.2
–0.4
0.6
0.4
0.2
0
–0.2
–0.4
–0.6
–0.6
–0.8
–0.8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–1.0
71.0
13128-111
71.5
Figure 103. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
TA = +85°C
TA = +25°C
TA = –55°C
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-114
0.4
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0.6
Figure 106. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
1.0
0.8
0.8
0.4
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0.6
0.2
0
–0.2
–0.4
0.4
0.2
0
–0.2
–0.4
–0.6
–0.6
–0.8
–0.8
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
–1.0
71.0
13128-112
71.5
Figure 104. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
TA = +85°C
TA = +25°C
TA = –55°C
0.6
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-115
1.0
–1.0
71.0
72.0
Figure 105. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
0.8
–1.0
71.0
71.5
RF FREQUENCY (GHz)
1.0
AMPLITUDE BALANCE (dB)
0.2
–0.6
RF FREQUENCY (GHz)
AMPLITUDE BALANCE (dB)
0.4
–0.6
–1.0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
0.6
13128-113
0.4
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0.6
13128-110
AMPLITUDE BALANCE (dB)
0.8
Figure 107. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 24 of 55
Data Sheet
HMC7586
PHASE BALANCE PERFORMANCE, LOWER SIDEBAND SELECTED
8
15
TA = +85°C
TA = +25°C
TA = –55°C
4
PHASE BALANCE (Degrees)
PHASE BALANCE (Degrees)
6
2
0
–2
–4
–6
TA = +85°C
TA = +25°C
TA = –55°C
10
5
0
–5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
13128-116
71.5
Figure 108. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 111. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
6
10
4
8
TA = +85°C
TA = +25°C
TA = –55°C
2
PHASE BALANCE (Degrees)
PHASE BALANCE (Degrees)
71.5
13128-119
–8
–10
71.0
0
–2
–4
–6
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
Figure 109. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 112. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
8
TA = +85°C
TA = +25°C
TA = –55°C
6
TA = +85°C
TA = +25°C
TA = –55°C
6
4
PHASE BALANCE (Degrees)
2
0
–2
–4
–6
–8
4
2
0
–2
–4
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
–10
71.0
13128-118
71.5
Figure 110. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-121
PHASE BALANCE (Degrees)
72.0
RF FREQUENCY (GHz)
8
–10
71.0
71.5
13128-120
71.5
13128-117
–10
71.0
–8
Figure 113. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 25 of 55
HMC7586
Data Sheet
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
2
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
14
12
12
CONVERSION GAIN (dB)
14
8
6
4
2
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 115. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
16
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
LO
LO
LO
LO
LO
LO
LO
6
4
71.5
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
74.0
74.5
75.0
75.5 76.0
4
–4
–8
–20
71.0
75.0
75.5 76.0
13128-124
–16
–20
71.0
74.5
73.5
0
–16
74.0
73.0
8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–12
73.5
75.5 76.0
Figure 118. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
–12
73.0
75.0
12
0
RF FREQUENCY (GHz)
74.5
16
–4
72.5
74.0
20
4
72.0
73.5
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
71.5
73.0
8
0
71.0
CONVERSION GAIN (dB)
20
72.5
10
2
13128-123
LO
LO
LO
LO
LO
LO
LO
72.0
Figure 117. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
16
10
71.5
RF FREQUENCY (GHz)
16
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13128-125
72.0
Figure 114. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
CONVERSION GAIN (dB)
6
13128-126
71.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
2
13128-122
0
71.0
10
Figure 116. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
RF FREQUENCY (GHz)
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
13128-127
CONVERSION GAIN (dB)
UPPER SIDEBAND SELECTED, IF = 500 MHz
Figure 119. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 26 of 55
Data Sheet
HMC7586
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–36
–36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 120. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–40
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 123. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
0
–8
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
–4
–8
IMAGE REJECTION (dBc)
LO
LO
LO
LO
LO
LO
LO
–12
–20
–24
–28
–32
–12
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–24
–28
–40
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–8
–16
–20
–24
–28
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
75.5 76.0
Figure 122. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–28
–40
71.0
13128-130
74.0
75.0
–24
–36
73.5
74.5
–20
–32
73.0
74.0
–16
–36
72.5
73.5
–12
–32
72.0
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–12
71.5
72.5
Figure 124. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
72.0
RF FREQUENCY (GHz)
Figure 121. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
–4
71.5
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-133
71.5
13128-129
–36
–40
71.0
13128-132
–32
–36
–40
71.0
71.5
RF FREQUENCY (GHz)
0
–4
IMAGE REJECTION (dBc)
–16
–32
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
71.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13128-128
IMAGE REJECTION (dBc)
–8
13128-131
–4
Figure 125. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Rev. A | Page 27 of 55
HMC7586
Data Sheet
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-134
71.5
–10
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 126. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
Figure 129. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-135
71.5
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 127. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
Figure 130. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
IP3 (dBm)
2
0
–2
2
0
–2
–4
–6
–6
–8
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-136
–4
–10
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
13128-138
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–4
–10
71.0
71.5
13128-137
–8
IP3 (dBm)
0
–2
–4
–10
71.0
IP3 (dBm)
2
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 131. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Figure 128. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
Rev. A | Page 28 of 55
13128-139
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
Data Sheet
HMC7586
40
40
36
36
28
IP2 (dBm)
24
20
16
16
12
8
4
4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
40
36
36
32
28
24
24
IP2 (dBm)
32
28
20
16
12
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
20
LO
LO
LO
LO
LO
LO
LO
16
12
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
4
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-141
71.5
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 136. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 3 V
40
40
36
36
32
32
28
28
24
24
IP2 (dBm)
Figure 133. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 500 MHz, VDLNA = 4 V
20
16
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
20
16
12
12
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
8
4
0
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 137. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
Figure 134. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
Rev. A | Page 29 of 55
13128-145
4
13128-142
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
0
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
13128-144
4
0
71.0
72.0
Figure 135. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
40
LO
LO
LO
LO
LO
LO
LO
71.5
RF FREQUENCY (GHz)
Figure 132. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
0
71.0
IP2 (dBm)
24
12
13128-140
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-143
TA = +85°C
TA = +25°C
TA = –55°C
32
HMC7586
Data Sheet
0
0
–2
LO
LO
LO
LO
LO
LO
LO
–2
TA = +85°C
TA = +25°C
TA = –55°C
–4
–4
P1dB (dBm)
–8
–10
–6
–8
–12
–10
–14
–18
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 138. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–14
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 139. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 4 V
Rev. A | Page 30 of 55
13128-149
–12
–16
13128-146
P1dB (dBm)
–6
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
Data Sheet
HMC7586
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
14
12
12
CONVERSION GAIN (dB)
14
8
6
4
2
71.5
72.0
72.5
73.0
73.5
74.0
74.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 141. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
16
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
LO
LO
LO
LO
LO
LO
LO
6
4
71.5
72.0
72.5
74.0
74.5
75.0
75.5 76.0
4
0
–4
–8
–20
71.0
75.0
75.5 76.0
13128-154
–16
–20
71.0
74.5
73.5
8
–16
74.0
73.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
Figure 144. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
–12
73.5
75.5 76.0
8
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–12
73.0
75.0
12
–4
RF FREQUENCY (GHz)
74.5
16
0
72.5
74.0
20
4
72.0
73.5
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
71.5
73.0
10
0
71.0
CONVERSION GAIN (dB)
20
72.5
2
13128-153
LO
LO
LO
LO
LO
LO
LO
72.0
Figure 143. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
16
10
71.5
RF FREQUENCY (GHz)
16
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13128-155
72.5
Figure 140. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
CONVERSION GAIN (dB)
6
13128-156
72.0
13128-152
71.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
2
2
0
71.0
10
Figure 142. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
RF FREQUENCY (GHz)
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
13128-157
CONVERSION GAIN (dB)
UPPER SIDEBAND SELECTED, IF = 1000 MHz
Figure 145. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 31 of 55
HMC7586
Data Sheet
0
0
–4
–4
TA = +85°C
TA = +25°C
TA = –55°C
–12
–16
–20
–24
–28
–20
–24
–28
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
–4
–16
–20
–24
–28
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–24
–28
RF FREQUENCY (GHz)
75.0
75.5 76.0
75.0
75.5 76.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
Figure 148. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–28
–40
71.0
13128-160
74.5
74.5
–24
–36
74.0
74.0
–20
–32
73.5
73.5
–16
–36
73.0
73.0
–12
–32
72.5
72.5
–8
–20
72.0
72.0
–4
–16
71.5
71.5
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–12
–40
71.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
Figure 150. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
LO
LO
LO
LO
LO
LO
LO
RF FREQUENCY (GHz)
Figure 147. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
–4
75.5 76.0
–24
–40
71.0
13128-159
73.5
75.0
–28
–36
73.0
74.5
–20
–36
72.5
74.0
–16
–32
72.0
73.5
–12
–32
71.5
73.0
–8
IMAGE REJECTION (dBc)
–12
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
72.5
Figure 149. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
0
LO
LO
LO
LO
LO
LO
LO
72.0
RF FREQUENCY (GHz)
–4
–8
71.5
13128-162
72.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-163
71.5
13128-161
–40
71.0
13128-158
–36
–40
71.0
Figure 146. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IMAGE REJECTION (dBc)
–16
–36
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–32
–40
71.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
IMAGE REJECTION (dBc)
IMAGE REJECTION (dBc)
–8
Figure 151. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 32 of 55
Data Sheet
HMC7586
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-164
71.5
–10
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 152. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
Figure 155. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-165
71.5
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 153. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
Figure 156. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
6
4
2
2
IP3 (dBm)
4
0
–2
–6
–8
–8
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-166
–6
72.0
Figure 154. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–2
–4
71.5
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
0
–4
–10
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 157. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 33 of 55
13128-168
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–4
–10
71.0
71.5
13128-167
–8
IP3 (dBm)
0
–2
–4
–10
71.0
IP3 (dBm)
2
13128-169
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
HMC7586
Data Sheet
40
40
36
TA = +85°C
TA = +25°C
TA = –55°C
32
28
IP2 (dBm)
24
20
16
16
12
8
4
4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 161. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
40
32
28
24
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
32
28
20
16
24
16
12
8
8
4
4
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-171
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
20
12
71.5
LO
LO
LO
LO
LO
LO
LO
36
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 162. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 3 V
40
40
36
36
32
32
28
28
24
24
IP2 (dBm)
Figure 159. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 1000 MHz, VDLNA = 4 V
20
16
16
12
4
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
4
13128-172
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
0
71.0
20
Figure 160. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
0
71.0
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 163. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
Rev. A | Page 34 of 55
13128-175
12
13128-174
40
0
71.0
71.5
RF FREQUENCY (GHz)
Figure 158. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
0
71.0
IP2 (dBm)
24
12
13128-170
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-173
36
Data Sheet
HMC7586
0
–2
–2
TA = +85°C
TA = +25°C
TA = –55°C
–4
P1dB (dBm)
–6
–8
–10
–6
–10
–12
–14
–14
–16
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 164. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–8
–12
13128-176
P1dB (dBm)
–4
LO
LO
LO
LO
LO
LO
LO
–16
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 165. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 1000 MHz, VDLNA = 4 V
Rev. A | Page 35 of 55
13128-179
0
HMC7586
Data Sheet
16
16
14
14
12
12
CONVERSION GAIN (dB)
10
8
6
TA = +85°C
TA = +25°C
TA = –55°C
4
2
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
14
12
12
CONVERSION GAIN (dB)
14
8
6
4
2
71.5
72.0
72.5
73.0
73.5
74.0
74.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 167. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
16
12
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–8
4
75.0
75.5 76.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
4
0
–4
–8
–20
71.0
13128-184
RF FREQUENCY (GHz)
72.0
8
–16
74.5
71.5
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
Figure 170. Conversion Gain vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
–16
74.0
LO
LO
LO
LO
LO
LO
LO
6
–12
73.5
75.5 76.0
8
–12
73.0
75.0
12
–4
72.5
74.5
16
0
72.0
74.0
20
4
71.5
73.5
RF FREQUENCY (GHz)
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
8
–20
71.0
73.0
10
0
71.0
CONVERSION GAIN (dB)
20
72.5
2
13128-183
LO
LO
LO
LO
LO
LO
LO
72.0
Figure 169. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
16
10
71.5
RF FREQUENCY (GHz)
16
0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
4
13128-185
72.0
Figure 166. Conversion Gain vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
CONVERSION GAIN (dB)
6
13128-186
71.5
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
8
2
13128-182
0
71.0
10
Figure 168. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
RF FREQUENCY (GHz)
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
13128-187
CONVERSION GAIN (dB)
UPPER SIDEBAND SELECTED, IF = 2000 MHz
Figure 171. Conversion Gain vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 36 of 55
Data Sheet
HMC7586
0
0
–4
TA = +85°C
TA = +25°C
TA = –55°C
IMAGE REJECTION (dBc)
–12
–16
–20
–24
–28
–20
–24
–28
–36
–36
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 172. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
–40
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 175. Image Rejection vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
0
–8
–16
–4
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
–8
IMAGE REJECTION (dBc)
LO
LO
LO
LO
LO
LO
LO
–12
–20
–24
–28
–32
–12
–16
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–20
–24
–28
–40
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–8
–16
–20
–24
–28
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
75.5 76.0
Figure 174. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
–28
–40
71.0
13128-190
74.0
75.0
–24
–36
73.5
74.5
–20
–32
73.0
74.0
–16
–36
72.5
73.5
–12
–32
72.0
73.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
–4
–12
71.5
72.5
Figure 176. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
IMAGE REJECTION (dBc)
–8
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
72.0
RF FREQUENCY (GHz)
Figure 173. Image Rejection vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
–4
71.5
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-193
71.5
13128-189
–36
–40
71.0
13128-192
–32
–36
–40
71.0
71.5
RF FREQUENCY (GHz)
0
–4
IMAGE REJECTION (dBc)
–16
–32
RF FREQUENCY (GHz)
IMAGE REJECTION (dBc)
–12
–32
–40
71.0
TA = +85°C
TA = +25°C
TA = –55°C
–8
13128-188
IMAGE REJECTION (dBc)
–8
13128-191
–4
Figure 177. Image Rejection vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 37 of 55
HMC7586
Data Sheet
10
10
8
8
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
IP3 (dBm)
0
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-194
71.5
–10
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 178. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 181. Input IP3 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
LO
LO
LO
LO
LO
LO
LO
6
4
2
8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
LO
LO
LO
LO
LO
LO
LO
6
4
IP3 (dBm)
8
0
–2
2
–2
–4
–6
–6
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-195
71.5
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 179. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
Figure 182. Input IP3 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
10
10
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
6
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
6
4
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
4
IP3 (dBm)
2
0
–2
2
0
–2
–4
–6
–6
–8
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-196
–4
–10
71.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
13128-198
–8
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
0
–4
–10
71.0
71.5
13128-197
–8
IP3 (dBm)
0
–2
–4
–10
71.0
IP3 (dBm)
2
–10
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 183. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Figure 180. Input IP3 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Rev. A | Page 38 of 55
13128-199
IP3 (dBm)
4
TA = +85°C
TA = +25°C
TA = –55°C
6
Data Sheet
HMC7586
40
40
36
36
28
IP2 (dBm)
24
20
16
16
12
8
4
4
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 187. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
40
36
32
28
24
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
32
28
20
16
24
16
12
8
8
4
4
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-201
72.0
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
20
12
71.5
LO
LO
LO
LO
LO
LO
LO
36
IP2 (dBm)
LO
LO
LO
LO
LO
LO
LO
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 188. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 3 V
40
40
36
36
32
32
28
28
24
24
IP2 (dBm)
Figure 185. Input IP2 vs. RF Frequency at Various LO Powers,
RFIN = −20 dBm, IF = 2000 MHz, VDLNA = 4 V
20
16
20
16
12
4
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
4
13128-202
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
8
0
71.0
71.5
72.0
72.5
73.0
= 5mA
= 10mA
= 15mA
= 20mA
= 25mA
73.5
74.0
IDLNA
IDLNA
IDLNA
IDLNA
IDLNA
74.5
75.0
= 30mA
= 35mA
= 40mA
= 45mA
= 50mA
75.5 76.0
RF FREQUENCY (GHz)
Figure 189. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Figure 186. Input IP2 vs. RF Frequency at Various IDLNA Values,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
Rev. A | Page 39 of 55
13128-205
12
0
71.0
13128-204
40
0
71.0
71.5
RF FREQUENCY (GHz)
Figure 184. Input IP2 vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
IP2 (dBm)
20
8
0
71.0
IP2 (dBm)
24
12
13128-200
IP2 (dBm)
28
TA = +85°C
TA = +25°C
TA = –55°C
32
13128-203
TA = +85°C
TA = +25°C
TA = –55°C
32
HMC7586
Data Sheet
0
–2
–2
TA = +85°C
TA = +25°C
TA = –55°C
–4
P1dB (dBm)
–6
–8
–10
–6
–10
–12
–14
–14
–16
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 190. Input P1dB vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
= –4dBm
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
–8
–12
13128-206
P1dB (dBm)
–4
LO
LO
LO
LO
LO
LO
LO
–16
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 191. Input P1dB vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 4 V
Rev. A | Page 40 of 55
13128-209
0
Data Sheet
HMC7586
NOISE FIGURE PERFORMANCE, UPPER SIDEBAND SELECTED
8
7
7
NOISE FIGURE (dB)
8
6
5
4
3
3
1
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
0
71.0
7
73.5
74.0
74.5
75.5 76.0
75.0
6
5
4
3
5
4
3
2
1
1
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
0
71.0
13128-213
72.0
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
2
71.5
LO
LO
LO
LO
LO
LO
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-216
NOISE FIGURE (dB)
8
Figure 196. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 1000 MHz, VDLNA = 3 V
Figure 193. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
7
7
NOISE FIGURE (dB)
8
6
5
4
3
5
4
3
1
1
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-214
2
72.0
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
2
71.5
LO
LO
LO
LO
LO
LO
9
0
71.0
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
Figure 197. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 2000 MHz, VDLNA = 3 V
Figure 194. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 41 of 55
13128-217
TA = +85°C
TA = +25°C
TA = –55°C
8
0
71.0
73.0
9
8
9
72.5
10
TA = +85°C
TA = +25°C
TA = –55°C
7
0
71.0
72.0
Figure 195. Noise Figure vs. RF Frequency at Various LO Powers,
IF = 500 MHz, VDLNA = 3 V
10
9
71.5
RF FREQUENCY (GHz)
Figure 192. Noise Figure vs. RF Frequency at Various Temperatures,
LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
NOISE FIGURE (dB)
4
1
RF FREQUENCY (GHz)
NOISE FIGURE (dB)
5
2
71.5
= –2dBm
= 0dBm
= +2dBm
= +4dBm
= +6dBm
= +8dBm
6
2
0
71.0
LO
LO
LO
LO
LO
LO
9
13128-212
NOISE FIGURE (dB)
9
10
TA = +85°C
TA = +25°C
TA = –55°C
13128-215
10
HMC7586
Data Sheet
AMPLITUDE BALANCE PERFORMANCE, UPPER SIDEBAND SELECTED
1.0
1.0
0.8
0.2
0
–0.2
–0.4
0
–0.2
–0.4
–0.8
–0.8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 198. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
–1.0
71.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
1.0
0.8
0.2
0
–0.2
–0.4
0.4
0.2
0
–0.2
–0.4
–0.6
–0.6
–0.8
–0.8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–1.0
71.0
13128-219
71.5
Figure 199. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
TA = +85°C
TA = +25°C
TA = –55°C
0.6
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-222
0.4
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0.6
Figure 202. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
1.0
1.0
0.5
0.5
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0
–0.5
–1.0
TA = +85°C
TA = +25°C
TA = –55°C
0
–0.5
–1.0
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
–2.0
71.0
13128-220
71.5
Figure 200. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-223
–1.5
–1.5
–2.0
71.0
72.0
Figure 201. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 3 V
0.8
–1.0
71.0
71.5
RF FREQUENCY (GHz)
1.0
AMPLITUDE BALANCE (dB)
0.2
–0.6
RF FREQUENCY (GHz)
AMPLITUDE BALANCE (dB)
0.4
–0.6
–1.0
71.0
TA = +85°C
TA = +25°C
TA = –55°C
0.6
13128-221
0.4
AMPLITUDE BALANCE (dB)
TA = +85°C
TA = +25°C
TA = –55°C
0.6
13128-218
AMPLITUDE BALANCE (dB)
0.8
Figure 203. Amplitude Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 42 of 55
Data Sheet
HMC7586
PHASE BALANCE PERFORMANCE, UPPER SIDEBAND SELECTED
10
10
8
TA = +85°C
TA = +25°C
TA = –55°C
PHASE BALANCE (Degrees)
4
2
0
–2
–4
0
–2
–4
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
–10
71.0
13128-224
71.5
RF FREQUENCY (GHz)
Figure 204. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 500 MHz, VDLNA = 4 V
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
Figure 207. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, F = 500 MHz, VDLNA = 3 V
8
4
2
0
–2
–4
4
2
0
–2
–4
–6
–6
–8
–8
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
–10
71.0
13128-225
71.5
Figure 205. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 4 V
TA = +85°C
TA = +25°C
TA = –55°C
6
71.5
72.0
72.5
73.0
73.5
74.0
74.5
75.0
75.5 76.0
RF FREQUENCY (GHz)
13128-228
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
Figure 208. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 1000 MHz, VDLNA = 3 V
10
10
8
8
PHASE BALANCE (Degrees)
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
TA = +85°C
TA = +25°C
TA = –55°C
6
4
2
0
–2
–4
–6
–8
–8
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
–10
71.0
13128-226
–10
71.0
72.0
10
8
–10
71.0
71.5
RF FREQUENCY (GHz)
10
PHASE BALANCE (Degrees)
2
13128-227
–8
PHASE BALANCE (Degrees)
4
–6
–6
–10
71.0
TA = +85°C
TA = +25°C
TA = –55°C
6
Figure 206. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 4 V
71.5
72.0
72.5
73.0
73.5
74.0
74.5
RF FREQUENCY (GHz)
75.0
75.5 76.0
13128-229
PHASE BALANCE (Degrees)
8
6
Figure 209. Phase Balance vs. RF Frequency at Various Temperatures,
RFIN = −20 dBm, LO = 2 dBm, IF = 2000 MHz, VDLNA = 3 V
Rev. A | Page 43 of 55
HMC7586
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 500 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.91 GHz
at LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.91 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.8
N/A
N/A
4
N/A
N/A
N/A
N/A
44.7
N/A
5
N/A
N/A
N/A
N/A
N/A
48.9
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.25 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.6
N/A
N/A
4
N/A
N/A
N/A
N/A
48.2
N/A
5
N/A
N/A
N/A
N/A
N/A
53.9
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.75 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37
N/A
N/A
4
N/A
N/A
N/A
N/A
43.7
N/A
5
N/A
N/A
N/A
N/A
N/A
56.5
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.7
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.1
N/A
N/A
4
N/A
N/A
N/A
N/A
44
N/A
5
N/A
N/A
N/A
N/A
N/A
48.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.25 MHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.2
N/A
N/A
4
N/A
N/A
N/A
N/A
45.9
N/A
5
N/A
N/A
N/A
N/A
N/A
51.1
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.75 GHz
at LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 44 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
35.6
N/A
N/A
4
N/A
N/A
N/A
N/A
42.5
N/A
5
N/A
N/A
N/A
N/A
N/A
54.7
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7586
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 1000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 12 GHz at
LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 12 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.9
N/A
N/A
4
N/A
N/A
N/A
N/A
44.8
N/A
5
N/A
N/A
N/A
N/A
N/A
51.8
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.33 MHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.1
N/A
N/A
4
N/A
N/A
N/A
N/A
47.7
N/A
5
N/A
N/A
N/A
N/A
N/A
55.1
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.83 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.2
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.8
N/A
N/A
4
N/A
N/A
N/A
N/A
46
N/A
5
N/A
N/A
N/A
N/A
N/A
59.4
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
33.9
N/A
N/A
4
N/A
N/A
N/A
N/A
43.6
N/A
5
N/A
N/A
N/A
N/A
N/A
50.5
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.33 MHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.6
N/A
N/A
4
N/A
N/A
N/A
N/A
45.8
N/A
5
N/A
N/A
N/A
N/A
N/A
53
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.83 GHz
at LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 45 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
26.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.2
N/A
N/A
4
N/A
N/A
N/A
N/A
44.8
N/A
5
N/A
N/A
N/A
N/A
N/A
56.7
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7586
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH LOWER
SIDEBAND SELECTED, IF = 2000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 12.16 GHz
at LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 12.16 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
39.7
N/A
N/A
4
N/A
N/A
N/A
N/A
46.7
N/A
5
N/A
N/A
N/A
N/A
N/A
56.7
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.5 MHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
29.15
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.7
N/A
N/A
4
N/A
N/A
N/A
N/A
47.1
N/A
5
N/A
N/A
N/A
N/A
N/A
57.5
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 13 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.6
N/A
N/A
4
N/A
N/A
N/A
N/A
50.4
N/A
5
N/A
N/A
N/A
N/A
N/A
63.4
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
28
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.3
N/A
N/A
4
N/A
N/A
N/A
N/A
44.1
N/A
5
N/A
N/A
N/A
N/A
N/A
54.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.5 MHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
29.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.5
N/A
N/A
4
N/A
N/A
N/A
N/A
45.3
N/A
5
N/A
N/A
N/A
N/A
N/A
55.5
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 13 GHz at
LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 46 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
27.1
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
38.8
N/A
N/A
4
N/A
N/A
N/A
N/A
48.8
N/A
5
N/A
N/A
N/A
N/A
N/A
61
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7586
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 500 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.75 GHz
at LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.75 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36
N/A
N/A
4
N/A
N/A
N/A
N/A
46.7
N/A
5
N/A
N/A
N/A
N/A
N/A
49.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.08 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
35.6
N/A
N/A
4
N/A
N/A
N/A
N/A
46.4
N/A
5
N/A
N/A
N/A
N/A
N/A
51.3
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.58 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.2
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.5
N/A
N/A
4
N/A
N/A
N/A
N/A
44.5
N/A
5
N/A
N/A
N/A
N/A
N/A
55.6
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.4
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
35.2
N/A
N/A
4
N/A
N/A
N/A
N/A
45.6
N/A
5
N/A
N/A
N/A
N/A
N/A
53
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12.08 MHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.1
N/A
N/A
4
N/A
N/A
N/A
N/A
44.5
N/A
5
N/A
N/A
N/A
N/A
N/A
48.7
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.58 GHz
at LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 47 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.9
N/A
N/A
4
N/A
N/A
N/A
N/A
44
N/A
5
N/A
N/A
N/A
N/A
N/A
53.3
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7586
Data Sheet
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 1000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.66 GHz
at LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.66 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.2
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.4
N/A
N/A
4
N/A
N/A
N/A
N/A
50.2
N/A
5
N/A
N/A
N/A
N/A
N/A
50.8
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.4
N/A
N/A
4
N/A
N/A
N/A
N/A
46
N/A
5
N/A
N/A
N/A
N/A
N/A
49.5
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.5 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.5
N/A
N/A
4
N/A
N/A
N/A
N/A
46.1
N/A
5
N/A
N/A
N/A
N/A
N/A
55.2
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
37.1
N/A
N/A
4
N/A
N/A
N/A
N/A
47.6
N/A
5
N/A
N/A
N/A
N/A
N/A
57.7
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 12 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
33.2
N/A
N/A
4
N/A
N/A
N/A
N/A
44.2
N/A
5
N/A
N/A
N/A
N/A
N/A
47.6
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.5 GHz at
LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 48 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
34.7
N/A
N/A
4
N/A
N/A
N/A
N/A
44.4
N/A
5
N/A
N/A
N/A
N/A
N/A
52.9
6
N/A
N/A
N/A
N/A
N/A
N/A
Data Sheet
HMC7586
M × N Spurious Outputs, VDLNA = 3 V
SPURIOUS PERFORMANCE WITH UPPER
SIDEBAND SELECTED, IF = 2000 MHz
TA = 25°C, VGMIX = −1 V, VDAMPx = 4 V, VDMULT = 1.5 V, LOIN =
2 dBm. Mixer spurious products are measured in dBc from the
IF output power level. Spur values are (M × RF) − (N × LO).
N/A means not applicable.
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.5 GHz at
LOIN = 2 dBm.
M × N Spurious Outputs, VDLNA = 4 V
RF = 71 GHz at RFIN = −10 dBm, LO frequency = 11.5 GHz at
LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.6
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
41.2
N/A
N/A
4
N/A
N/A
N/A
N/A
49.5
N/A
5
N/A
N/A
N/A
N/A
N/A
59.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 11.83 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.8
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
32
N/A
N/A
4
N/A
N/A
N/A
N/A
44.2
N/A
5
N/A
N/A
N/A
N/A
N/A
48.6
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.33 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.4
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.8
N/A
N/A
4
N/A
N/A
N/A
N/A
47.2
N/A
5
N/A
N/A
N/A
N/A
N/A
54.6
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
25.3
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
40.1
N/A
N/A
4
N/A
N/A
N/A
N/A
46.3
N/A
5
N/A
N/A
N/A
N/A
N/A
66.4
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 73 GHz at RFIN = −10 dBm, LO frequency = 11.83 GHz
at LOIN = 2 dBm.
M × RF
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
24.5
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
36.1
N/A
N/A
4
N/A
N/A
N/A
N/A
42.6
N/A
5
N/A
N/A
N/A
N/A
N/A
48.1
6
N/A
N/A
N/A
N/A
N/A
N/A
RF = 76 GHz at RFIN = −10 dBm, LO frequency = 12.33 GHz
at LOIN = 2 dBm.
M × RF
6
N/A
N/A
N/A
N/A
N/A
N/A
Rev. A | Page 49 of 55
0
1
2
3
4
5
0
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
N/A
N/A
23.9
N/A
N/A
N/A
N × LO
3
N/A
N/A
N/A
35.5
N/A
N/A
4
N/A
N/A
N/A
N/A
45
N/A
5
N/A
N/A
N/A
N/A
N/A
52.2
6
N/A
N/A
N/A
N/A
N/A
N/A
HMC7586
Data Sheet
THEORY OF OPERATION
balanced passive mixers. Quadrature LO signals drive the two
I and Q mixer cores. The LO path provides a 6× multiplier that
allows the use of a lower frequency range LO input signal,
typically between 11.83 GHz and 14.33 GHz. The 6× multiplier
is implemented using a cascade of 3× and 2× multipliers. The
LO buffer amplifiers are included on chip to allow a typical LO
drive level of only 2 dBm for full performance.
The HMC7586 is a GaAs low noise I/Q downconverter with an
integrated LO buffer and a 6× multiplier. See Figure 210 for a
functional block diagram of the downconverter circuit
architecture.
The RF input is internally ac-coupled and matched to 50 Ω. The
input passes through four stages of low noise amplification. The
preamplified RF input signal then splits and drives two singly
IFIP IFIN
VDAMP2
VGAMP
VDAMP1 VDMULT
2×
VGX3 VGX2 LOIN
3×
VGMIX
AC COUPLING,
MATCHING ELEMENTS,
AND GND BOND PADS NOT ILLUSTRATED.
IFQN IFQP
VDLNA4
VGLNA4 VDLNA3
VGLNA3 VDLNA2
VGLNA2 VDLNA1
Figure 210. Downconverter Circuit Architecture
Rev. A | Page 50 of 55
VGLNA1
13128-230
RFIN
Data Sheet
HMC7586
APPLICATIONS INFORMATION
BIASING SEQUENCE
To power down the HMC7586, follow the reverse procedure.
The HMC7586 uses several amplifier and multiplier stages. The
active stages all utilize depletion mode pHEMT transistors. It is
important to follow the following power-up bias sequence to
ensure transistor damage does not occur.
For additional guidance on general bias sequencing, see the
MMIC Amplifier Biasing Procedure application note.
1.
2.
3.
4.
5.
6.
IMAGE REJECTION DOWNCONVERSION
A typical image rejection downconversion application circuit is
shown in Figure 211. For image rejection downconversion,
external 180° and 90° hybrid couplers are typically used. The
180° hybrids or baluns convert the differential I and Q output
signals to unbalanced waveforms. The 90° hybrid then combines
the outputs in quadrature to form a classic Hartley image
rejection receiver with a typical image rejection of 28 dBc.
Apply a −2 V bias to VGAMP, VGLNA1, VGLNA2, VGLNA3, VGLNA4,
VGX2, and VGX3.
Apply a −1 V bias to VGMIX.
Apply 4 V to VDAMP1, VDAMP2, VDLNA1, VDLNA2, VDLNA3, and
VDLNA4, and apply 1.5 V to VDMULT.
Adjust VGAMP between −2 V and 0 V to achieve a total
amplifier drain current (IDAMP1 + IDAMP2) of 175 mA.
Adjust VGLNA1, VGLNA2, VGLNA3, and VGLNA4 to achieve a total
LNA drain current (IDLNA1 + IDLNA2 + IDLNA3 + IDLNA4) of
50 mA.
Apply an LO input signal with a power level of ~2 dBm and
adjust VGX2 and VGX3 between 2 V and 0 V to achieve
80 mA of drain current on VDMULT.
VGAMP
VDAMP1 , VDAMP2
+
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
+
+
4.7µF
VDMULT
4.7µF
VGX2, VGX3
VGMIX
+
+
4.7µF
LOIN
13
14
15
16
17
18
19
20
21
LOIN
12
VGX2
11
VGX3
10
VDMULT
9
VDAMP1
8
VGAMP
5
7
VDAMP2
IFIN
6
VGMIX
IFIP
4
180°
HYBRID
6×
IF
OUTPUT
IFQN
IFQP
3
RFIN
2
22
180°
HYBRID
23
40
VDLNA4
+
39
38
37
36
35
34
33
32
31
29
28
VGLNA1
27
26
25
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
VGLNA4
+
30
VDLNA1
VGLNA2
VDLNA2
VDLNA3
VGLNA3
24
VGLNA4
HMC7586
VDLNA4
1
RF
INPUT
Figure 211. Typical Image Rejection Downconversion Application Circuit
Rev. A | Page 51 of 55
+
+
VGLNA1, VGLNA2, VGLNA3
4.7µF
VDLNA1 , VDLNA2 , VDLNA3
4.7µF
13128-231
90°
HYBRID
HMC7586
Data Sheet
The HMC7586 I/Q outputs are ground referenced, and dc coupling
to a differential signal source with a common-mode output voltage
other than 0 V may cause degraded RF performance and possible
device damage due to electrical overstress.
ZERO IF DIRECT CONVERSION
A typical zero IF direct conversion application circuit is shown
in Figure 212. It is important to ac couple the IFIP, IFIN, IFQP,
and IFQN pads to the ADC inputs. Most ADCs are designed to
operate with a common-mode voltage that is above ground.
VDAMP1 , VDAMP2
+
VGMIX
+
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
+
+
+
4.7µF
4.7µF
4.7µF
VGAMP
VDMULT
VGX2, VGX3
LOIN
13
14
15
16
17
18
19
20
21
LOIN
12
VGX2
11
VGX3
10
VDMULT
IFIN
9
VDAMP2
I ADC
8
VDAMP1
5
7
VGAMP
6
VGMIX
IFIP
4
6×
IFQN
3
Q ADC
RFIN
IFQP
2
22
VDLNA4
+
VGLNA4
+
39
38
37
36
34
33
32
31
30
VGLNA1
VDLNA1
VGLNA2
VDLNA2
VGLNA3
35
29
28
27
26
RF
INPUT
24
25
4.7µF
0.01µF
120pF
120pF
0.01µF
4.7µF
0.01µF
120pF
120pF
0.01µF
Figure 212. Typical Zero IF Direct Conversion Application Circuit
Rev. A | Page 52 of 55
+
+
VGLNA1, VGLNA2, VGLNA3
4.7µF
VDLNA1 , VDLNA2 , VDLNA3
4.7µF
13128-232
40
VDLNA3
HMC7586
VDLNA4
1
VGLNA4
23
Data Sheet
HMC7586
ASSEMBLY DIAGRAM
VGMIX
VDAMP1 ,
VDAMP2
VGAMP
VDMULT
VGX2,
VGX3
4.7µF
4.7µF
4.7µF
4.7µF
4.7µF
0.01µF
1mil
GOLD WIRE
(WEDGE BOND)
3mil
NOMINAL GAP
120pF
50Ω
TRANSMISSION
LINE
120pF
1mil
GOLD WIRE
(WEDGE BOND)
3mil WIDE
GOLD RIBBON
(WEDGE BOND)
0.01µF
4.7µF
VDLNA4
VGLNA4
4.7µF
4.7µF
VDLNA1 , VDLNA2 , VGLNA1 , VGLNA2,
VDLNA3
VGLNA3
Figure 213. Assembly Diagram
Rev. A | Page 53 of 55
13128-234
4.7µF
HMC7586
Data Sheet
MOUNTING AND BONDING TECHNIQUES FOR MILLIMETERWAVE GaAs MMICS
Attach the die directly to the ground plane eutectically or with
conductive epoxy.
To bring RF to and from the chip, use 50 Ω microstrip transmission lines on 0.127 mm (5 mil) thick alumina thin film
substrates (see Figure 214).
General Handling
Handle the chip on the edges only using a vacuum collet or with
a sharp pair of bent tweezers. Because the surface of the chip
has fragile air bridges, never touch the surface of the chip with a
vacuum collet, tweezers, or fingers.
MOUNTING
0.05mm (0.002") THICK GaAs MMIC
The chip is back metallized and can be die mounted with gold/
tin (AuSn) eutectic preforms or with electrically conductive
epoxy. The mounting surface must be clean and flat.
WIRE BOND
0.076mm
(0.003")
Eutectic Die Attach
It is best to use an 80%/20% gold tin preform with a work
surface temperature of 255°C and a tool temperature of 265°C.
When hot 90%/10% nitrogen/hydrogen gas is applied, maintain
tool tip temperature at 290°C. Do not expose the chip to a
temperature greater than 320°C for more than 20 sec. No more
than 3 sec of scrubbing is required for attachment.
0.127mm (0.005") THICK ALUMINA
THIN FILM SUBSTRATE
13128-235
RF GROUND PLANE
Figure 214. Routing RF Signals
To minimize bond wire length, place microstrip substrates as
close to the die as possible. Typical die to substrate spacing is
0.076 mm to 0.152 mm (3 mil to 6 mil).
HANDLING PRECAUTIONS
To avoid permanent damage, adhere to the following
precautions.
Epoxy Die Attach
ABLEBOND 84-1LMIT is recommended for die attachment.
Apply a minimum amount of epoxy to the mounting surface so
that upon placing it into position, a thin epoxy fillet is observed
around the perimeter of the chip. Cure epoxy per the schedule
provided by the manufacturer.
Storage
WIRE BONDING
All bare die ship in either waffle or gel-based ESD protective
containers, sealed in an ESD protective bag. After opening
the sealed ESD protective bag, store all die a dry nitrogen
environment.
RF bonds made with 3 mil (0.0762 mm) × 0.5 mil (0.0127 mm)
gold ribbon are recommended for RF port and wedge bonds with
1 mil (0.0254 mm) diameter gold wire are recommended for IF
and LO ports. Thermosonically bond these bonds with a force of
40 g to 60 g. DC bonds of 1 mil (0.0254 mm) diameter, thermosonically bonded, are recommended. Create ball bonds with a force
of 40 g to 50 g and wedge bonds with a force of 18 g to 22 g. Create
all bonds with a nominal stage temperature of 150°C. Apply a
minimum amount of ultrasonic energy to achieve reliable bonds.
Keep all bonds as short as possible, less than 12 mil (0.31 mm).
Cleanliness
Handle the chips in a clean environment. Never use liquid
cleaning systems to clean the chip.
Static Sensitivity
Follow ESD precautions to protect against ESD strikes that are
greater than 100 V.
Transients
Suppress instrument and bias supply transients while bias is
applied. To minimize inductive pickup, use shielded signal and
bias cables.
Rev. A | Page 54 of 55
Data Sheet
HMC7586
OUTLINE DIMENSIONS
3.599
0.290
0.510
0.474
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
0.151
0.058
6
5
0.307
7
8
9
10
11 12 13 14 15 16 17 18 19 20
21
0.162
4
0.648
2.199
3
0.307
2
22
0.500
23
24
1
0.210
0.095
31 30 29 28 27 26 25
0.274
0.114
0.318
1.055
0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
TOP VIEW
(CIRCUIT SIDE)
04-10-2015-A
0.085
40 39 38 37 36 35 34 33 32
0.130
0.130
Figure 215. 40-Pad Bare Die [CHIP]
(C-40-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
HMC7586
HMC7586-SX
1
2
Temperature Range
−55°C to +85°C
−55°C to +85°C
Package Description
40-Pad Bare Die [CHIP]
40-Pad Bare Die [CHIP]
The HMC7586-SX consists of two pairs of the die in a gel pack for sample orders.
This is a waffle pack option; contact Analog Devices, Inc. for additional packaging options.
©2016 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13128-0-3/16(A)
Rev. A | Page 55 of 55
Package Option2
C-40-1
C-40-1