Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC346MS8G / 346MS8GE
v07.1008
ATTENUATORS - SMT
5
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
Typical Applications
Features
This attenuator is ideal for use as a VVA
for DC - 8 GHz applications:
Wide Bandwidth: DC - 8 GHz
• Point-to-Point Radio
32 dB Attenuation Range
Low Phase Shift vs. Attenuation
• VSAT Radio
General Description
Functional Diagram
The HMC346MS8G & HMC346MS8GE are absorptive Voltage Variable Attenuators (VVA) in 8 lead surface-mount packages operating from DC - 8 GHz. It
features an on-chip reference attenuator for use with
an external op-amp to provide simple single voltage
attenuation control, 0 to -3V. The device is ideal in
designs where an analog DC control signal must control RF signal levels over a 30 dB amplitude range.
Applications include AGC circuits and temperature
compensation of multiple gain stages in microwave
point-to-point and VSAT radios.
Electrical Specifi cations, TA = +25° C, 50 ohm system
Parameter
Typical
Max
Units
1.5
2.5
dB
DC - 8 GHz
Attenuation Range
DC - 8 GHz
27
32
dB
Return Loss
DC - 8 GHz
5
10
dB
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
2
8
ns
ns
Input Power for 0.25 dB Compression (0.5 - 8 GHz)
Min. Atten.
Atten. >2 dB
+8
-2
dBm
dBm
Input Third Order Intercept (0.5 - 8 GHz)
(Two-tone Input Power = -8 dBm Each Tone)
Min. Atten.
Atten. >2 dB
+25
+10
dBm
dBm
Switching Characteristics
5 - 102
Min
Insertion Loss
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC346MS8G / 346MS8GE
v07.1008
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
-1
-10
-2
T+25C
T -40C
T+85C
-20
-30
-40
-4
0
1
2
3
4
5
6
7
8
9
0
10
1
2
3
0
0
-5
-0.5
CONTROL VOLTAGE (Vdc)
RETURN LOSS (dB)
5
6
-10
-15
-20
MIN
15 dB
MAX
2
3
4
5
6
7
8
9
V2 +25C
-2
-2.5
0
10
5
10
15
V1 +25C
20
V1 -40C
25
30
RELATIVE ATTENUATION (dB)
Relative Attenuation vs.
Control Voltage @ 8 GHz
Relative Phase
140
0
CONTROL VOLTAGE (Vdc)
max
25 dB 30 dB
120
RELATIVE PHASE (DEG)
10
V2 +85C
-1.5
FREQUENCY (GHz)
20 dB
100
15 dB
10 dB
80
9
V2 -40C
V1 +85C
1
8
-1
-3
-30
0
7
Relative Attenuation vs.
Control Voltage @ 4 GHz
Return Loss vs. Attenuation
-25
4
FREQUENCY (GHz)
FREQUENCY (GHz)
ATTENUATORS - SMT
0
ATTENUATION (dB)
INSERTION LOSS (dB)
0
-3
5
Relative Attenuation
Insertion Loss vs. Temperature
5 dB
60
40
20
-0.5
V2 -40C
-1
V2 +25C
V2 +85C
-1.5
-2
-2.5
V1 +85C
0
V1 +25C
V1 -40C
-3
0
1
2
3
4
5
6
FREQUENCY (GHz)
7
8
9
10
0
5
10
15
20
25
30
RELATIVE ATTENUATION (dB)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 103
HMC346MS8G / 346MS8GE
v07.1008
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
Input Third Order
Intercept vs Attenuation*
Input Second Order
Intercept vs. Attenuation*
70
30
SECOND ORDER INTERCEPT POINT (dBm)
THIRD ORDER INTERCEPT POINT (dBm)
ATTENUATORS - SMT
5
25
0 dB
3 dB
6 dB
10 dB
20
15
10
60
50
40
30
0 dB
3 dB
6 dB
10 dB
20
10
5
0
1
2
3
4
5
6
7
0
8
1
2
3
FREQUENCY (GHz)
0.25 dB Compression vs. Attenuation
5
6
8
20
0 dB (REF)
5 dB
15
INPUT P1dB (dBm)
15
10
5
10
5
0
0 dB (REF)
5 dB
0
-5
-5
0
1
2
3
4
5
6
7
8
0
1
2
3
FREQUENCY (GHz)
4
5
6
FREQUENCY (GHz)
Second Harmonic vs. Attenuation
SECOND HARMONIC (dBc)
80
70
60
50
40
0 dB
3 dB
30
6 dB
10 dB
20
0
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
*Two-tone input power = -8 dBm each tone, 1 MHz spacing.
5 - 104
7
1 dB Compression vs. Attenuation
20
INPUT.25dB COMPRESSION (dBm)
4
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7
8
HMC346MS8G / 346MS8GE
v07.1008
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
RF Input Power
+18 dBm
Control Voltage Range
+1 to -5 V
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
ATTENUATORS - SMT
5
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC346MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC346MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H346
XXXX
[2]
H346
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 105
HMC346MS8G / 346MS8GE
v07.1008
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
ATTENUATORS - SMT
5
Pin Descriptions
Pin Number
Function
Description
1, 8
RF1
RF2
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
2, 7
GND
This pin must be DC grounded.
3, 6
V2, V1
Control Input (Master).
4
I
Control Input (Slave).
5
N/C
Not Connected.
Interface Schematic
Single-Line Control Driver
External op-amp control circuit maintains impedance match while attenuation is varied. Input control ranges from 0 Volts
(min. attenuation) to -2.5 Volts (max. attenuation.)
5 - 106
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC346MS8G / 346MS8GE
v07.1008
GaAs MMIC SMT VOLTAGE-VARIABLE
ATTENUATOR, DC - 8 GHz
5
ATTENUATORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104091 [1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J7
DC PIN
U1
HMC346MS8G / HMC346MS8GE
PCB [2]
104089 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF ports should be
50 ohm impedance and the package ground leads
and package bottom should be connected directly
to the PCB RF ground plane, similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 107