Sorrell College of Buiness
Visual Presenter 660
Quick Start Guide
1.
2.
3.
4.
5.
6.
Lens
Camera Arms
Auxiliary floodlight and Lamp Arm
Where the Object (Document) is placed
Power Button
Auto Tune Button
TROY UNIVERSITY
Sorrell College of Buiness
Visual Presenter 660
To Begin Using The Doc Cam
1. Pull up the camera and the camera arm. The camera should aim at the center of the presenter.
2. Press and hold the [LAMP RELEASE] on both sides of the Visual Presenter and push the latches
forward to pull up the lamp arm.
3. Turning the folded lamp arm toward the platform as in the direction of the arrow.
4. Place an object to be displayed under the camera.
5. Press [POWER]
6. Press [AUTO TUNE]

on the remote control or control panel to power on.
on the control panel to optimize the image. You are ready to present.
Once PS650 is turned on, the LED on the control panel will flash a few times and stay lit.
TROY UNIVERSITY