50 MHz to 4.0 GHz RF/IF Gain Block ADL5601

advertisement
50 MHz to 4.0 GHz
RF/IF Gain Block
ADL5601
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
GND
Fixed gain of 15 dB
Operation from 50 MHz to 4.0 GHz
Highest dynamic range gain block
Input/output internally matched to 50 Ω
Integrated bias control circuit
OIP3 of 43.0 dBm at 900 MHz
P1dB of 19.0 dBm at 900 MHz
Noise figure of 3.7 dB at 900 MHz
Single 5 V power supply
Low quiescent current of 83 mA
Thermally efficient SOT-89 package
ESD rating of ±1.5 kV (Class 1C)
(2)
ADL5601
1
2
3
RFIN
GND
RFOUT
08219-001
BIAS
Figure 1.
GENERAL DESCRIPTION
The ADL5601 is a broadband, 15 dB linear amplifier that operates
at frequencies up to 4.0 GHz. The device can be used in a wide
variety of cellular, cable television (CATV), military, and instrumentation equipment.
The ADL5601 provides the highest dynamic range available
from an internally matched gain block. This is accomplished by
providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4.0 GHz frequency range.
The ADL5601 provides a gain of 15 dB, which is stable over
frequency, temperature, and supply voltage, as well as from device
to device. The device is internally matched to 50 Ω at the input
and output, making the ADL5601 very easy to implement in a wide
Rev. A
variety of applications. Only input/output ac coupling capacitors,
power supply decoupling capacitors, and an external inductor
are required for operation.
The ADL5601 is fabricated on an InGaP heterojunction bipolar
transistor (HBT) process and has an ESD rating of ±1.5 kV
(Class 1C). The device is available in a thermally efficient SOT-89
package.
The ADL5601 consumes 83 mA on a single 5 V supply and is
fully specified for operation from −40°C to +85°C.
A fully populated RoHS-compliant evaluation board is
available.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADL5601
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Basic Connections .......................................................................... 12
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Soldering Information and
Recommended PCB Land Pattern ........................................... 12
Revision History ............................................................................... 2
W-CDMA ACPR Performance .................................................... 13
Specifications..................................................................................... 3
Evaluation Board ............................................................................ 14
Typical Scattering Parameters (S-Parameters) ......................... 5
Outline Dimensions ....................................................................... 15
Absolute Maximum Ratings............................................................ 7
Ordering Guide .......................................................................... 15
ESD Caution .................................................................................. 7
Pin Configuration and Function Descriptions ............................. 8
Typical Performance Characteristics ............................................. 9
REVISION HISTORY
11/13—Rev. 0 to Rev. A
Added Figure 15, Renumbered Sequentially ...............................11
Changes to Figure 17 .......................................................................12
Updated Outline Dimensions ........................................................15
9/09—Revision 0: Initial Version
Rev. A | Page 2 of 16
Data Sheet
ADL5601
SPECIFICATIONS
VCC = 5 V and TA = 25°C, unless otherwise noted.
Table 1.
Parameter
OVERALL FUNCTION
Frequency Range
FREQUENCY = 50 MHz
Gain
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 140 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 350 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 700 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
Test Conditions/Comments
Min
Typ
50
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
14.3
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
18.0
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
Rev. A | Page 3 of 16
Max
Unit
4000
MHz
15.6
16.3
34.0
−50.7
−78.7
3.9
dB
dBm
dBm
dBc
dBc
dB
15.4
±0.05
±0.19
±0.02
18.8
34.7
−51.1
−77.3
3.8
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
15.2
±0.02
±0.20
±0.02
19.1
35.8
−53.8
−82.9
3.8
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
15.2
±0.01
±0.21
±0.02
19.0
40.7
−55.6
−77.9
3.8
16.5
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
ADL5601
Parameter
FREQUENCY = 900 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 2000 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 2600 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 3500 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 4000 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
Data Sheet
Test Conditions/Comments
Min
Typ
Max
Unit
14.3
15.3
±0.01
±0.22
±0.02
19.0
43.0
−57.6
−78.7
3.7
16.5
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
18.0
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
Rev. A | Page 4 of 16
14.2
±0.08
±0.27
±0.03
17.5
34.2
−41.9
−67.3
4.5
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
13.4
±0.04
±0.20
±0.04
16.0
30.7
−46.4
−65.4
4.7
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
12.9
±0.06
±0.32
±0.05
14.2
26.7
−41.0
−62.4
5.5
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
12.1
±0.11
±0.50
±0.05
12.7
24.7
−41.0
−59.7
6.1
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
Data Sheet
ADL5601
Parameter
POWER INTERFACE
Supply Voltage (VCC)
Supply Current
vs. Temperature
Power Dissipation
Test Conditions/Comments
VCC
Min
Typ
Max
Unit
4.5
5.0
83
±2.3
0.42
5.5
100
V
mA
mA
W
−40°C ≤ TA ≤ +85°C
VCC = 5 V
TYPICAL SCATTERING PARAMETERS (S-PARAMETERS)
VCC = 5 V, TA = 25°C, and the effects of the evaluation board have been deembedded up to the pins of the device.
Table 2.
Frequency
(MHz)
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
S11
Magnitude (dB)
−20.65
−25.05
−25.57
−24.93
−24.24
−23.29
−22.53
−22.07
−21.78
−21.51
−21.57
−21.78
−22.13
−22.68
−23.43
−24.35
−25.29
−25.88
−25.90
−25.31
−24.16
−23.38
−22.70
−22.10
−21.81
−21.78
−21.96
−22.31
−22.92
−23.53
−24.04
−24.50
−24.13
−23.01
−21.46
−19.67
−17.73
−15.95
−14.26
−12.72
−11.36
Angle (°)
−144.57
+175.09
+149.73
+130.36
+114.36
+101.24
+88.38
+76.45
+66.13
+55.91
+46.37
+38.11
+30.61
+23.62
+18.47
+16.37
+16.28
+20.10
+25.78
+29.70
+29.42
+25.45
+20.88
+13.43
+4.90
−4.74
−15.31
−27.46
−40.13
−55.61
−74.40
−95.46
−118.14
−140.97
−161.36
−178.55
+167.17
+154.24
+141.96
+130.33
+119.00
S21
Magnitude (dB)
+15.59
+15.34
+15.27
+15.20
+15.14
+15.07
+15.02
+14.97
+14.94
+14.92
+14.90
+14.89
+14.89
+14.88
+14.89
+14.89
+14.89
+14.88
+14.87
+14.87
+14.86
+14.83
+14.81
+14.80
+14.78
+14.75
+14.72
+14.68
+14.64
+14.60
+14.56
+14.49
+14.43
+14.37
+14.27
+14.18
+14.07
+13.92
+13.77
+13.60
+13.39
Angle (°)
+161.69
+149.77
+136.48
+122.75
+108.91
+95.06
+81.26
+67.39
+53.57
+39.81
+25.97
+12.17
−1.54
−15.54
−29.41
−43.49
−57.51
−71.67
−85.39
−99.48
−113.64
−127.83
−141.81
−155.93
−170.15
+175.70
+161.57
+147.40
+133.17
+118.79
+104.52
+90.23
+75.97
+61.50
+47.04
+32.52
+18.07
+3.63
−10.89
−25.40
−39.85
Rev. A | Page 5 of 16
S12
Magnitude (dB)
−19.76
−19.85
−19.89
−19.92
−19.96
−19.99
−20.03
−20.05
−20.07
−20.08
−20.09
−20.10
−20.10
−20.11
−20.11
−20.11
−20.12
−20.13
−20.14
−20.16
−20.18
−20.22
−20.25
−20.27
−20.31
−20.35
−20.40
−20.44
−20.50
−20.56
−20.62
−20.70
−20.79
−20.89
−21.00
−21.12
−21.26
−21.42
−21.60
−21.81
−22.05
Angle (°)
−7.97
−24.47
−38.84
−52.66
−66.22
−79.64
−92.91
−106.12
−119.35
−132.53
−145.77
−159.04
−172.37
+174.38
+161.06
+147.71
+134.31
+120.86
+107.34
+93.84
+80.32
+66.77
+53.39
+39.79
+26.19
+12.56
−1.10
−14.74
−28.45
−42.17
−55.96
−69.82
−83.66
−97.51
−111.39
−125.37
−139.35
−153.36
−167.35
+178.67
+164.79
S22
Magnitude (dB)
−16.61
−16.06
−15.85
−15.63
−15.49
−15.40
−15.35
−15.38
−15.48
−15.68
−16.07
−16.65
−17.41
−18.36
−19.65
−21.34
−23.41
−25.86
−28.12
−28.73
−27.11
−25.16
−23.33
−22.27
−21.38
−20.75
−20.35
−20.06
−19.80
−19.60
−19.29
−18.83
−18.22
−17.57
−16.78
−15.91
−14.91
−13.88
−12.82
−11.79
−10.77
Angle (°)
−168.75
+164.97
+145.84
+128.22
+112.53
+98.52
+84.79
+71.26
+58.84
+46.57
+34.25
+22.42
+10.91
−0.29
−10.39
−18.60
−25.16
−26.32
−18.10
−1.68
+8.91
+5.98
+1.75
−8.80
−21.30
−35.07
−50.07
−66.34
−83.25
−100.18
−117.80
−135.14
−150.53
−164.65
−177.64
+170.73
+160.24
+150.20
+140.45
+130.63
+120.32
ADL5601
Frequency
(MHz)
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
3550
3600
3650
3700
3750
3800
3850
3900
3950
4000
Data Sheet
S11
Magnitude (dB)
−10.11
−9.04
−8.12
−7.33
−6.66
−6.11
−5.65
−5.28
−5.00
−4.78
−4.64
−4.54
−4.50
−4.52
−4.60
−4.72
−4.92
−5.18
−5.52
−5.95
−6.50
−7.17
−7.96
−8.95
−10.11
−11.43
−12.93
−14.51
−15.96
−16.86
−16.83
−15.98
−14.75
−13.43
−12.23
−11.21
−10.32
−9.59
−8.99
Angle (°)
+107.84
+96.61
+85.63
+74.68
+63.86
+53.33
+42.82
+32.51
+22.51
+12.49
+2.62
−7.06
−16.80
−26.55
−36.24
−46.09
−56.14
−66.18
−76.58
−87.31
−98.20
−109.56
−121.53
−134.08
−147.58
−162.30
−178.72
+161.78
+138.82
+111.84
+83.89
+58.24
+36.92
+18.94
+3.37
−10.83
−24.29
−37.18
−49.64
S21
Magnitude (dB)
+13.16
+12.90
+12.63
+12.34
+12.04
+11.75
+11.46
+11.18
+10.94
+10.73
+10.56
+10.43
+10.35
+10.31
+10.32
+10.37
+10.47
+10.60
+10.76
+10.96
+11.16
+11.37
+11.59
+11.77
+11.94
+12.09
+12.18
+12.24
+12.26
+12.24
+12.17
+12.06
+11.92
+11.76
+11.54
+11.31
+11.05
+10.78
+10.49
Angle (°)
−54.15
−68.23
−82.16
−95.90
−109.35
−122.46
−135.36
−147.97
−160.34
−172.61
+175.37
+163.51
+151.65
+139.80
+127.87
+115.83
+103.58
+91.16
+78.44
+65.65
+52.38
+38.77
+24.80
+10.48
−4.10
−18.93
−34.00
−49.17
−64.42
−79.75
−95.04
−110.33
−125.55
−140.74
−155.80
−170.64
+174.74
+160.27
+146.04
Rev. A | Page 6 of 16
S12
Magnitude (dB)
−22.31
−22.60
−22.91
−23.24
−23.59
−23.92
−24.25
−24.57
−24.86
−25.12
−25.33
−25.52
−25.66
−25.74
−25.78
−25.79
−25.75
−25.67
−25.57
−25.45
−25.30
−25.16
−25.03
−24.91
−24.71
−24.64
−24.61
−24.63
−24.69
−24.80
−24.97
−25.15
−25.39
−25.66
−25.97
−26.33
−26.71
−27.07
−27.43
Angle (°)
+150.95
+137.28
+123.82
+110.57
+97.61
+84.90
+72.46
+60.24
+48.34
+36.64
+25.08
+13.55
+2.20
−9.14
−20.59
−32.13
−43.77
−55.71
−67.81
−80.30
−93.05
−106.14
−119.49
−133.23
−148.47
−162.78
−177.32
+168.07
+153.27
+138.48
+123.67
+108.97
+94.34
+79.90
+65.42
+51.35
+37.49
+23.89
+10.62
S22
Magnitude (dB)
−9.78
−8.88
−8.12
−7.45
−6.85
−6.37
−6.00
−5.68
−5.44
−5.29
−5.19
−5.13
−5.13
−5.19
−5.27
−5.40
−5.60
−5.86
−6.16
−6.57
−7.07
−7.65
−8.35
−9.19
−10.19
−11.23
−12.44
−13.64
−14.74
−15.67
−16.20
−15.98
−15.33
−14.38
−13.18
−12.03
−11.04
−10.13
−9.28
Angle (°)
+109.99
+99.58
+88.80
+77.69
+66.77
+55.88
+44.86
+33.86
+23.12
+12.46
+1.65
−9.06
−19.67
−30.41
−41.23
−52.01
−62.93
−74.10
−85.27
−96.63
−108.36
−120.33
−132.41
−144.97
−157.59
−171.07
+174.45
+158.38
+140.90
+121.24
+98.98
+76.14
+55.10
+35.05
+17.14
+1.60
−12.99
−27.31
−40.73
Data Sheet
ADL5601
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage, VCC
Input Power (Referred to 50 Ω)
Internal Power Dissipation (Paddle Soldered)
θJA (Junction to Air)
θJC (Junction to Paddle)
Maximum Junction Temperature
Lead Temperature (Soldering, 60 sec)
Operating Temperature Range
Storage Temperature Range
Rating
6.5 V
16 dBm
600 mW
30.7°C/W
5.0°C/W
150°C
240°C
−40°C to +85°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. A | Page 7 of 16
ADL5601
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
RFIN
1
GND
2
RFOUT
3
ADL5601
(2) GND
NOTES
1. THE EXPOSED PADDLE IS
INTERNALLY CONNECTED TO GND
AND MUST BE SOLDERED TO A LOW
IMPEDANCE GROUND PLANE.
08219-002
TOP VIEW
(Not to Scale)
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
Mnemonic
RFIN
GND
RFOUT
(2)
Exposed Paddle
Description
RF Input. This pin requires a dc blocking capacitor.
Ground. Connect this pin to a low impedance ground plane.
RF Output and Supply Voltage. A dc bias is provided to this pin through an inductor that is connected to the
external power supply. The RF path requires a dc blocking capacitor.
Exposed Paddle. The exposed paddle is internally connected to GND and must be soldered to a low impedance
ground plane.
Rev. A | Page 8 of 16
Data Sheet
ADL5601
TYPICAL PERFORMANCE CHARACTERISTICS
45
26
45
+25°C
40
24
OIP3
30
20
P1dB
30
25
18
+25°C –40°C
16
GAIN
15
+85°C
20
P1dB (dBm)
25
14
10
0
0
0.4
0.8
1.2
20
15
+85°C
10
12
NF
5
35
–40°C
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
OIP3 (dBm)
22
5
4.0
10
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
08219-006
35
08219-020
NF, GAIN, P1dB, OIP3 (dB, dBm)
40
FREQUENCY (GHz)
Figure 6. P1dB and OIP3 vs. Frequency and Temperature
Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency
44
16.0
15.5
900MHz
42
–40°C
40
15.0
36
+25°C
14.0
OIP3 (dBm)
13.5
13.0
2000MHz
34
32
140MHz
50MHz
30
2600MHz
28
26
12.5
24
12.0
3500MHz
22
11.5
4000MHz
20
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
18
–10 –8
08219-004
11.0
–6
–4
–2
0
2
4
6
8
10
12
14
16
POUT PER TONE (dBm)
08219-007
GAIN (dB)
14.5
700MHz
350MHz
38
+85°C
Figure 7. OIP3 vs. Output Power (POUT) and Frequency
Figure 4. Gain vs. Frequency and Temperature
0
7.5
7.0
–5
NOISE FIGURE (dB)
–15
S22
–20
S12
–25
S11
6.0
+85°C
5.5
5.0
+25°C
4.5
–40°C
4.0
3.5
–30
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
Figure 5. Input Return Loss (S11), Output Return Loss (S22), and
Reverse Isolation (S12) vs. Frequency
2.5
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
FREQUENCY (GHz)
Figure 8. Noise Figure vs. Frequency and Temperature
Rev. A | Page 9 of 16
4.0
08219-008
3.0
–35
08219-021
S-PARAMETERS (dB)
6.5
–10
ADL5601
Data Sheet
–30
80
70
–40
PERCENTAGE (%)
HARMONICS (dBc)
60
–50
H2
–60
–70
50
40
30
20
H3
–80
10
–90
2.0
2.5
3.0
3.5
4.0
FREQUENCY (GHz)
0
38
40
39
42
41
43
47
46
45
44
48
49
08219-010
1.5
1.0
4.4
08219-023
0.5
08219-022
0
OIP3 (dBm)
Figure 12. OIP3 Distribution at 900 MHz, POUT = 0 dBm
Figure 9. Single-Tone Harmonics vs. Frequency, POUT = 0 dBm
90
60
80
50
PERCENTAGE (%)
PERCENTAGE (%)
70
60
50
40
30
40
30
20
20
10
10
14.5
14.7
14.9
15.1
15.3
15.5
15.7
15.9
GAIN (dB)
0
08219-011
0
3.0
3.2
3.4
3.6
Figure 10. Gain Distribution at 900 MHz
4.2
Figure 13. Noise Figure Distribution at 900 MHz
92
60
5.25V
90
50
SUPPLY CURRENT (mA)
88
40
30
20
86
84
5V
82
80
78
4.75V
76
10
72
–40 –30 –20 –10
0
18.4
18.6
18.8
19
19.2
19.4
P1dB (dBm)
19.6
0
10
20
30
40
50
60
70
TEMPERATURE (°C)
Figure 11. P1dB Distribution at 900 MHz
Figure 14. Supply Current vs. Temperature
Rev. A | Page 10 of 16
80
90
08219-014
74
08219-012
PERCENTAGE (%)
4.0
3.8
NOISE FIGURE (dB)
Data Sheet
ADL5601
100
+85°C
+25°C
90
85
–40°C
80
75
–6
–4
–2
0
2
4
6
8
10
12
14
16
18
20
22
POUT (dBm)
08219-100
SUPPLY CURRENT (mA)
95
Figure 15. Supply Current vs. POUT and Temperature VCC = 5 V
Rev. A | Page 11 of 16
ADL5601
Data Sheet
BASIC CONNECTIONS
The basic connections for operating the ADL5601 are shown in
Figure 16. Recommended components are listed in Table 5. The
input and output should be ac-coupled with appropriately sized
capacitors (the device characterization was performed with
0.1 μF capacitors). A 5 V dc bias is supplied to the amplifier
through the bias inductor connected to RFOUT (Pin 3). The
bias voltage should be decoupled using a 1 µF capacitor, a 1.2 nF
capacitor, and a 68 pF capacitor.
GND VCC
C6
GND
1µF
(2)
SOLDERING INFORMATION AND RECOMMENDED
PCB LAND PATTERN
Figure 17 shows the recommended land pattern for the ADL5601.
To minimize thermal impedance, the exposed paddle on the
package underside, along with Pin 2, should be soldered to a
ground plane. If multiple ground layers exist, they should be
stitched together using vias. For more information on land
pattern design and layout, refer to the AN-772 Application
Note, A Design and Manufacturing Guide for the Lead Frame
Chip Scale Package (LFCSP).
C5
1.80mm
1.2nF
ADL5601
C4
68pF
2
RFIN
L1
470nH
3
GND
RFOUT
RFIN
C2
0.1µF
RFOUT
08219-015
C1
0.1µF
1
Figure 16. Basic Connections
0.762mm
0.635mm
3.48mm
5.37mm
0.20mm
0.62mm
0.86mm
1.27mm
0.86mm
08219-101
1.50mm
3.00mm
Figure 17. Recommended Land Pattern
Table 5. Recommended Components for Basic Connections
Frequency
50 MHz to 4000 MHz
C1
0.1 µF
C2
0.1 µF
L1
470 nH (Coilcraft 0603LS-NX or equivalent)
Rev. A | Page 12 of 16
C4
68 pF
C5
1.2 nF
C6
1 µF
Data Sheet
ADL5601
W-CDMA ACPR PERFORMANCE
–45
–50
–55
–60
–65
–70
–75
–20
–15
–10
–5
0
5
10
POUT (dBm)
Figure 18. ACPR vs. POUT, Single W-CDMA Carrier (Test Model 1, 64)
at 2140 MHz
Rev. A | Page 13 of 16
08219-024
The ADL5601 achieves an ACPR of −69 dBc at −5 dBm output,
at which point device noise, rather than distortion, begins to
dominate the power in the adjacent channels. At an output
power of +5 dBm, ACPR is still very low at −56 dBc, making
the device particularly suitable for power amplifier (PA) driver
applications.
–40
ACPR AT 5MHz CARRIER OFFSET (dBc)
Figure 18 shows a plot of the adjacent channel power ratio
(ACPR) vs. POUT for the ADL5601. The signal type used is a
single wideband code division multiple access (W-CDMA)
carrier (Test Model 1, 64) at 2140 MHz. This signal is generated
by a very low ACPR source. ACPR is measured at the output by
a high dynamic range spectrum analyzer that incorporates an
instrument noise-correction function.
ADL5601
Data Sheet
EVALUATION BOARD
Figure 19 shows the evaluation board layout, and Figure 20
shows the schematic for the ADL5601 evaluation board. The
board is powered by a single 5 V supply.
GND VCC
C6
GND
1µF
(2)
C5
The components used on the board are listed in Table 6.
Power can be applied to the board through clip-on leads
(VCC and GND).
1.2nF
ADL5601
C4
68pF
1
RFIN
L1
470nH
3
2
GND
RFOUT
RFIN
C2
0.1µF
RFOUT
08219-018
Figure 20. Evaluation Board Schematic
Figure 19. Evaluation Board Layout (Top)
Table 6. Evaluation Board Configuration Options
Component
C1, C2
L1
VCC and GND
C4
C5
C6
Description
AC coupling capacitors
DC bias inductor
Clip-on terminals for power supply
Power supply decoupling capacitor
Power supply decoupling capacitor
Power supply decoupling capacitor
Default Value
0.1 μF, 0402
470 nH, 0603 (Coilcraft 0603LS-NX or equivalent)
68 pF, 0603
1.2 nF, 0603
1 μF, 1206
Rev. A | Page 14 of 16
08219-019
C1
0.1µF
Data Sheet
ADL5601
OUTLINE DIMENSIONS
1.75
1.55
(2)
4.25
3.94
1
2
2.413
2.380
2.337
2.60
2.30
3
1.20
0.75
1.50 TYP
1.270
1.252
1.219
BOTTOM VIEW
0.635
0.569
0.508
3.00 TYP
TOP VIEW
2.29
2.14
4.60
4.40
1.60
1.40
0.44
0.35
END VIEW
0.52
0.32
COMPLIANT TO JEDEC STANDARDS TO-243
09-12-2013-C
PKG-003480
0.56
0.36
Figure 21. 3-Lead Small Outline Transistor Package [SOT-89]
(RK-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADL5601ARKZ-R7
ADL5601-EVALZ
1
Temperature Range
−40°C to +85°C
Package Description
3-Lead SOT-89, 7“ Tape and Reel
Evaluation Board
Z = RoHS Compliant Part.
Rev. A | Page 15 of 16
Package Option
RK-3
ADL5601
Data Sheet
NOTES
©2009–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08219-0-11/13(A)
Rev. A | Page 16 of 16
Download