Fingerprint Reader
CHD200G series
User Manual
Content
1.
Products Introductions ......................................... 1
2.
Product Parameters ........................................... 1
3. Functions and Operation ........................................... 2
3.1 FUNCTIONS ........................................................................................................................................... 2
3.1.1 Working Mode ................................................................................................................................ 2
3.1.2 Keypad functions ........................................................................................................................... 2
3.1.3 ID/IC card reading Fucntions....................................................................................................... 2
3.1.4 Fingerprint identify mode.............................................................................................................. 2
3.1.5 Stress fingerprint alarm functions ............................................................................................... 2
3.1.6 Fingerprint output .......................................................................................................................... 2
3.1.7 Fingerprint register ........................................................................................................................ 2
3.2 OPERATION ........................................................................................................................................... 3
3.2.1 Fingerprint scan method .............................................................................................................. 3
3.2.2 Simply operation method ............................................................................................................. 3
3.2.2.1 Register User.............................................................................................................................. 3
3.2.2.2 Register fingerprint .................................................................................................................... 3
3.2.2.3 Register fingerprint .................................................................................................................... 3
3.2.2.4 Standalone mode ....................................................................................................................... 3
3.2.2.5 Swipe card with fingerprint ....................................................................................................... 3
3.2.2.6 ID with fingerprint ....................................................................................................................... 3
3.2.2.7 ID with password ........................................................................................................................ 4
3.2.2.8 Swipe card with password ........................................................................................................ 4
3.2.2.9 Fingerprint with password......................................................................................................... 4
3.2.2.10 Change Device ID ................................................................................................................... 4
3.3 OUTPUT CONNECTION .......................................................................................................................... 4
3.3.1 Wiegand Output connection ........................................................................................................ 4
3.3.2 Tamper alarm output connections............................................................................................... 4
3.3.3 RS485 connections ....................................................................................................................... 5
4. Connection Defines ................................................ 5
5. Appearance and Dimension ......................................... 6
5.1APPEARANCE ......................................................................................................................................... 6
5.2 DIMENSION ........................................................................................................................................... 7
6. Installation Defines ................................................ 7
6.1 INSTALLATION TOOLS AND MATERIALS ................................................................................................. 7
6.2 INSTALLATION STEPS ............................................................................................................................ 7
6.2.1 Installation station selection......................................................................................................... 7
6.2.2 Installation ...................................................................................................................................... 7
6.2.2.1 installation wall manage ............................................................................................................ 7
6.2.2.2 Cables connection ..................................................................................................................... 8
7. Packing List....................................................... 8
CHD200G series Fingerprint Reader
1. Products Introductions
CHD200G series Fingerprint Reader is the second generation Fingerprint Reader of our
company, integrates with strong 32bit RISC CPU and the advanced identify algorithm, also have
Voice Remind functions. It provides the fast 1:1 or 1:N comparison, well-adapted standalone
fingerprint identify products. With strong anti-interferences, and anti-stress, tamper functions,
make the product more useful and safety. It extends the password keypad, ID/IC card reader and
voice remind functions, and the product have identification+authorization confirmation functions,
supports Wiegand 26 output and RS 485. Usually used in Smart Buildings, Bank Vaults, Control
Centers, and Jails etc. with strict security requirement areas.
Item
Model No.
Name
Remark
1
CHD200G
Fingerprint Reader
Fingerprint identify, Wiegand output, RS485
2
CHD200GK
Keypad Fingerprint
Fingerprint identify+password, Wiegand output,
Reader
RS485
3
CHD200GID
4
CHD200GIC
5
CHD200GIDK
6
CHD200GICK
ID Card Fingerprint
Fingerprint identify+ID card, Wiegand output, RS485
Reader
IC Card Fingerprint
Fingerprint identify+IC card, Wiegand output, RS485
Reader
ID Card Fingerprint
Fingerprint identify+ID card+password, Wiegand
Reader with Keypad
output, RS485
IC Card Fingerprint
Fingerprint identify+ID card+password, Wiegand
Reader with Keypad
output, RS485
2. Product Parameters
Dimension: 155mm(L) * 52mm(W) * 39mm(D) ±5%;
Weight: 0.2Kg±5%;
Working Voltage: 12VDC±5%;
Working Current: 300mA±5%;
Car Type: ID or IC card;
Frequency: ID card: 125KHZ±5%, IC card: 13.56MHZ±5%;
Reading distance: 50-100mm (without other same products interferences);
Working environment: -10~+55 C degree, 20%~90%;
Working environment: -20~+70℃, 5%～90%;
ESD parameter: air discharge ±8KV
Working status: standby status, LED blue light ON; scan the fingerprint, green LED light ON;
illegal fingerprint, buzzer three beeps, red LED and blue LED blink twice; legal fingerprint,
buzzer beep once, red LED and blue LED blinks twice; legal fingerprint, buzzer beep once,
1
CHD200G series Fingerprint Reader
red LED light and blue LED light blink once; swipe card, buzzer beep once, red LED light and
blue light blink once.
Standard: Fingerprint Enterprise Standard, Enterprise Standard No.: Q/NBL007-2006.
Others:
Keypad: 12 keys;
Communication: RS485, use for fingerprint download or upload;
Communication speed: 9600/19200/38400/115200 BPS, 38400BPS as default;
Net ID: 1-254 set by software, default as 1, using 0 to do any operation;
Output Interface: Wiegand, OC output;
Output format: 26bits /28bits /44 bits optional;
Communication distance: Wiegand less than 60m, RS485 less than 1200m;
Sensitivity Grade: FRR 1.4%, FAR 0.00001%;
User Capacity: maximum 5000 users;
Fingerprint Capacity: 5000;
Fingerprint working mode: 1: N identification: support fingerprint, card, keypad
1:1 identification: support keypad ID + fingerprint, card + fingerprint
Password function: fingerprint + password, card + password, ID + password
Fingerprint identify time: ID + fingerprint / card + fingerprint, less than 1s
Fingerprint only work mode: save 5000 fingerprints, identify time less than 3s;
Fingerprint scan valid area: 16mmX14mm±5%
3. Functions and Operation
3.1 Functions
3.1.1 Working Mode
Support to use software to set Device working mode, output Wiegand format, In & Out
direction, Wiegand output code method.
3.1.2 Keypad functions
When the case of no associate keypad mode, keypad output support 4/8 Wiegand mode
3.1.3 ID/IC card reading Fucntions
Without associated fingerprint situations, support Wiegand 26/44 format output.
3.1.4 Fingerprint identify mode
Support fingerprint only, ID + fingerprint, card + fingerprint identification modes.
3.1.5 Stress fingerprint alarm functions
Once user input stress fingerprint, output alarm information through Wiegand 28/29 mode.
3.1.6 Fingerprint output
Fingerprint ID output format support BCD code and Hexadecimal output
3.1.7 Fingerprint register
Using software to register, maximum fingerprint eigenvalue as 1664 bytes. Through RS485,
maximum user 6000 users.
2
CHD200G series Fingerprint Reader
3.2 Operation
3.2.1 Fingerprint scan method
To take HD fingerprint image, , finger should be close to touch fingerprint sensor and refer to
below picture and use correct method to scan the fingerprint:
Pic a
Pic b
Pic c
Pic d
Pic e
Remark: Pic a and Pic b as the right way, Pic a as face, Pic b as side. Pic c, Pic d and Pic e
as wrong way.
Put the finger and wait more than 0.5s! One user can have three fingerprints, here advice
one user register 1 or 2 fingerprints.
3.2.2 Simply operation method
Connect the device by RS485 with the computer, use software to manage, and do the
following operations:
3.2.2.1 Register User
Using software to register user information, include User ID, Fingerprint Index No. (No. in
the registered fingerprint database), Card No., backup password;
3.2.2.2 Register fingerprint
Using software to register, maximum fingerprint eigenvalue as 1664 bytes.
3.2.2.3 Register fingerprint
Using software to register the registered fingerprint, if not register in the device first.
3.2.2.4 Standalone mode
Input fingerprint, swipe card or press keypad, then output the set Wiegand format date.
3.2.2.5 Swipe card with fingerprint
Swipe card first, scan the fingerprint in the 10s of the associated fingerprint, if input
succeed, will output the User ID by the set Wiegand input format. If the device is as Out
direction, output Wiegand 29 only. Press button to output the keypad signal.
3.2.2.6 ID with fingerprint
Input User and press # as the end, input the fingerprint in 10s, if succeed, will output the
User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29
only. Swipe card to output the associated Card No.
3
CHD200G series Fingerprint Reader
3.2.2.7 ID with password
Input User and press # as the end, input the user password in 10s, if succeed, will output
the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand
29 only. Swipe card to output the associated Card No.
3.2.2.8 Swipe card with password
Input User and press # as the end, input the user password in 10s, if succeed, will
output the User ID by the set Wiegand input format. If the device is as Out direction, output
Wiegand 29 only. Input fingerprint to output the associated User ID
3.2.2.9 Fingerprint with password
Input Fingerprint, input the user password and press # as the end in 10s, if succeed,
will output the User ID by the set Wiegand input format. If the device is as Out direction, output
Wiegand 29 only. Swipe card to output the associated Card No.
3.2.2.10 Change Device ID
Using ID as 0 to connect the device with the software, then use the software to change the
ID, available range is from 1 to 254.
3.3 Output Connection
3.3.1 Wiegand Output connection
Fingerprint Reader
Controller
3.3.2 Tamper alarm output connections
4
CHD200G series Fingerprint Reader
When have alarm (door switch, infrared) audion power on, relay action.
Remark: OC door alarm output, need addition a outer relay and a DC12V power supply.
3.3.3 RS485 connections
Attentions:
1. RS485 communication suggests use STP cable had better multi-core
STP;
2. Use a twin-STP cable to be signal cable;
RS485 connection:
1. A, B terminals must be welded well;
2. Must use CAT-5 STP;
Terminals
CAT-5 STP
A
A
System
B
B
RS485
For more devices using RS485 to connect:
A
B
120Ohm resistance
4. Connection Defines
5
CHD200G series Fingerprint Reader
No.
Color
Function
Remark
1
Red
+12VC
2
Black
GND
3
Brown
RS485A
4
Grey
RS485B
5
Green
Wiegand WD0
6
White
Wiegand WD1
Connect with controller
Wiegand, transfer
fingerprint ID
7
Yellow
Alarm output
Tamper alarm
8
Orange
Backup
Power supply
Upload or download data
5. Appearance and Dimension
5.1Appearance
6
CHD200G series Fingerprint Reader
5.2 Dimension
6. Installation Defines
Attentions:
Fully consider easy for repair and maintains
Location should avoid choose high temperature site
Device can’t under straight sunlight
Device can’t be shower bath
Before installation please testing device
6.1 Installation tools and materials
Installation tools:
Electric drill, strike drill, cross screwdriver, angle grinder, wire-cutter, wire strippers, press
line pliers, the hammer, etc.
Installation material:
PVC cable tank or cable tube, screws, installation hanger, etc
6.2 Installation Steps
6.2.1 Installation station selection
Fingerprint reader along to high technical precision instrument, the installation place will
affect the products life-span and working performance, refer to above notice to choose the best
place for use.
6.2.2 Installation
When install the fingerprint reader, pay attention to the screwdriver and other edge tools
don’t destroy the shell, avoid any damage to keep good appearance.
6.2.2.1 installation wall manage
Before installation, must manage the wall, find the logical height-ness (suggest 1.4 to
1.5m), and based on the hanger (accessory of fingerprint reader) size to drill the holes on the
wall to fix the fingerprint reader, and wiring the reader, the hanger size refers to below picture:
7
CHD200G series Fingerprint Reader
Fingerprin
t Reader
Metal board
6.2.2.2 Cables connection
Connection the cables according to the definition, and weld the cable joint to keep it
fastness, and use the pyrocondensation tube to packing it well.
Take care below points:
1) The power supply cable must connect correct, red cable to positive, black cable to
negative, can’t be in reverse.
2) Fingerprint reader Wiegand output signal cables, connect the Wiegand of the controller
for transferring fingerprint ID to controller;
3) Power supply cables suggest to use more than 0.5 square mm, signal cables use
AWG16#-AWG24# cables, much better to use shielded wire pipe to make the cables low
down the possibility of the outside interferences.
7. Packing List
Item
Content
Qty
1
Fingerprint Reader
1pcs
2
8P BNC multi color cables
1pcs
3
M4*12mm flat crews
2pcs
4
M6*30 rubber plug
2pcs
5
User Manual
1pcs
6
Certification
1pcs
8
Remark