GRUNDFOS DATA BOOKLET CRNE90-2 A-F-G-V-HQQV 3x400 50 HZ Grundfos Pump 96124393 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/CRNE90/96124393/CRNE-90-2-A-F-G-V-HQQV.html info@lenntech.com tel. +31-15-261.09.00 fax. +31-15-261.62.89 BE > THINK > INNOVATE Company name: Created by: Phone: Fax: Date: Position Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - Qty. Description 1 CRNE 90-2 A-F-G-V-HQQV Note! Product picture may differ from actual product Product No.: 96124393 Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power transmission is via a split coupling. Pipework connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. Further product details An external sensor can be connected if controlled pump operation based on for example flow, differential pressure or temperature is required. The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or exceed legislative requirements such as the EuP IE3 grade. Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the process is a pretreatment. The entire process consists of these elements: 1) Alkaline-based cleaning. 2) Zinc phosphating. 3) Cathodic electro-deposition. 4) Curing to a dry film thickness 18-22 my m. The colour code for the finished product is NCS 9000/RAL 9005. Pump A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of two coupling guards. The long coupling makes it possible to replace the shaft seal without removing the motor from the pump. Printed from Grundfos CAPS [2013.03.059] 1/8 Company name: Created by: Phone: Fax: Date: Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and air vent screw. The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal. Primary seal: - Rotating seal ring material: Silicon carbide (SiC) - Stationary seat material: Silicon carbide (SiC) This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing offers good resistance against abrasive particles. Secondary seal material: FKM (fluorocarbon rubber) FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used in media without water. The shaft seal is retained in the pump head by a cover and screws. It can be replaced without removing the motor. The chambers and impellers are made of stainless steel sheet. The chambers are provided with a PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface, and the shape of the blades ensure a high efficiency. The pump has a stainless steel base mounted on a separate base plate. The base and base plate are kept in position by the tension of the staybolts which hold the pump together. Both the suction and the discharge side of the base have two pressure gauge tappings. The pump is secured to the foundation by four bolts through the base plate. The flanges are fastened to the base by means of locking rings. Printed from Grundfos CAPS [2013.03.059] 2/8 Company name: Created by: Phone: Fax: Date: Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - Motor The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. Electrical tolerances comply with IEC 60034. The motor requires no external motor protection. The motor control unit incorporates protection against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions. Technical data Liquid: Pumped liquid: Liquid temperature range: Liquid temp: Density: Water 253 .. 363 K 293 K 998.2 kg/m³ Technical: Speed for pump data: Rated flow: Rated head: Shaft seal: 2923 rpm 90 m³/h 43.2 m HQQV Materials: Pump housing: Impeller: Stainless steel DIN W.-Nr. 1.4401 AISI 316 Stainless steel DIN W.-Nr. 1.4401 AISI 316 Installation: Maximum ambient temperature: 313 K Max pressure at stated temp: 16 bar / 90 °C 16 bar / -20 °C Flange standard: DIN Pipe connection: DN 100 Pressure stage: PN 16 Flange size for motor: FF300 Electrical data: Motor type: Rated power - P2: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Printed from Grundfos CAPS [2013.03.059] 160MD 15 kW 50 Hz 3 x 380-480 V 30,0-26,0 A 0,91-0,86 480-3540 rpm 3/8 Company name: Created by: Phone: Fax: Date: Position Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - Qty. Description Enclosure class (IEC 34-5): Insulation class (IEC 85): IP55 F Others: Label: Grundfos Blueflux Minimum efficiency index, MEI ≥: 0.7 Net weight: 214 kg Gross weight: 265 kg Shipping volume: 0.8 m3 Printed from Grundfos CAPS [2013.03.059] 4/8 Company name: Created by: Phone: Fax: Date: Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - 96124393 CRNE 90-2 50 Hz H [m] CRNE 90-2, 3*400 V, 50Hz eta [%] Pumped liquid = Water Liquid temperature = 293 K Density = 998.2 kg/m³ 75 70 100 % 65 60 55 50 100 45 90 40 80 35 70 30 60 25 50 20 40 15 30 10 20 25 % 5 10 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 Q [m³/h] P [kW] NPSH [m] P1 15 15 P2 10 10 5 5 0 0 Printed from Grundfos CAPS [2013.03.059] 5/8 Company name: Created by: Phone: Fax: Date: 0 348 380 4 x ø14 DIN 0 8 x ø18 5 ø100 Grundfos Blueflux 0.7 214 kg 265 kg 0.8 m3 95139506 5 280 Others: Label: Minimum efficiency index, MEI ≥: Net weight: Gross weight: Shipping volume: Config. file no: NPSH [m] 10 261 160MD 15 kW 50 Hz 3 x 380-480 V 30,0-26,0 A 0,91-0,86 480-3540 rpm IP55 F 85757526 Q [m³/h] P2 199 Electrical data: Motor type: Rated power - P2: Mains frequency: Rated voltage: Rated current: Cos phi - power factor: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): Motor No: 100 G 1/2 Water 253 .. 363 K 293 K 998.2 kg/m³ 80 10 PN16/DN100 Liquid: Pumped liquid: Liquid temperature range: Liquid temp: Density: 60 P1 350 Flange standard: Connect code: Pipe connection: Pressure stage: Flange size for motor: 313 K 16 bar / 90 °C 16 bar / -20 °C DIN F DN 100 PN 16 FF300 40 G 1/2 Installation: Maximum ambient temperature: Max pressure at stated temp: 20 314 Material code: Code for rubber: 100 90 80 70 60 50 40 30 20 10 0 308 Impeller: Stainless steel DIN W.-Nr. 1.4401 AISI 316 Stainless steel DIN W.-Nr. 1.4401 AISI 316 G V eta [%] 45 Materials: Pump housing: 2923 rpm 90 m³/h 43.2 m 2 HQQV 2 A A 70 100 % 65 60 55 50 45 40 35 30 25 20 15 10 5 25 % 0 0 P [kW] ø220 Technical: Speed for pump data: Rated flow: Rated head: Impellers: Shaft seal: Stages: Pump version: Model: CRNE 90-2 A-F-G-V-HQQV 96124393 5700396707174 CRNE 90-2, 3*400 V, 50Hz Pumped liquid = Water Liquid temperature = 293 K Density = 998.2 kg/m³ ø156 Product name: Product No: EAN number: H [m] Value ø180 Description Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - 140 6: GND (frame) 5: +10 V 4: Setpoint input 3: GND (frame) 2: Start/stop 1: Digital input 9: GND (frame) 8: +24 V 7: Sensor input B: RS-485B Y: Screen A: RS-485A 471 L1 L2 L3 773 6 5 4 3 2 10K RUN 0-10 V 0/4-20 mA B Y A 7 8 9 1 STOP 1/0 0-10 V 0/4-20 mA 4-20 mA NC C2 NO NC C1 NO Group 3 Group 2 Group 1 Printed from Grundfos CAPS [2013.03.059] 6/8 Company name: Created by: Phone: Fax: Date: Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - 96124393 CRNE 90-2 50 Hz 308 471 314 350 G 1/2 DIN 773 PN16/DN100 8 x ø18 199 45 ø100 261 280 380 348 ø220 ø180 140 ø156 G 1/2 4 x ø14 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2013.03.059] 7/8 Company name: Created by: Phone: Fax: Date: Lenntech BV - lenntech.com info@lenntech.com +31 15 2610900 +31 15 2616289 - NC C2 NO NC C1 NO 0-10 V 0/4-20 mA 4-20 mA Group 1 1/0 B Y A 7 8 9 1 Group 3 Group 2 96124393 CRNE 90-2 50 Hz L1 L2 L3 1: Digital input 9: GND (frame) 8: +24 V 7: Sensor input B: RS-485B Y: Screen A: RS-485A STOP RUN 0/4-20 mA 6: GND (frame) 5: +10 V 4: Setpoint input 3: GND (frame) 2: Start/stop 0-10 V 10K 6 5 4 3 2 Note! All units are in [mm] unless others are stated. Printed from Grundfos CAPS [2013.03.059] 8/8 Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com www.lenntech.com tel. +31-15-261.09.00 fax. +31-15-261.62.89