GRUNDFOS DATA BOOKLET
CRN150-6 A-F-G-V-HBQV 75kW 3x400D 50Hz
Grundfos Pump 95922429
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRN150/95922429/CRN-150-6-A-F-G-V-HBQV.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CRN 150-6 A-F-G-V-HBQV
Note! Product picture may differ from actual product
Product No.: 95922429
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in
high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy
service and access. Power transmission is via a split coupling. Pipework connection is via DIN
flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means
of two coupling guards. The long coupling makes it possible to replace the shaft seal without
removing the motor from the pump.
The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming
plug and air vent screw.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible
wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Carbon graphite, resin-impregnated
- Stationary seat material: Silicon carbide (SiC)
This material pairing has a very good corrosion resistance and is especially suitable for water up to
+90 °C. The seal life will be reduced significantly at temperatures above +90 °C. The material
pairing is not recommended for liquids containing particles as this will result in heavy wear on the
SiC face.
Secondary seal material: FKM (fluorocarbon rubber)
FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used in
media without water.
The shaft seal is retained in the pump head by a cover and screws. It can be replaced without
removing the motor.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The pump has a stainless steel base mounted on a separate base plate. The base and base plate
are kept in position by the tension of the staybolts which hold the pump together. Both the suction
and the discharge side of the base have two pressure gauge tappings. The pump is secured to the
foundation by four bolts through the base plate. The flanges are fastened to the base by means of
locking rings.
Motor
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.
The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled
conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the
motor is to be connected to a variable speed drive, the pump should be ordered with an electrically
insulated motor bearing. Grundfos CUE offers a range of variable speed drives. Please find more
information in Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
273 .. 363 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Curve tolerance:
2975 rpm
150 m³/h
134 m
HBQV
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Stainless steel
DIN W.-Nr. 1.4408
AISI 351
Stainless steel
DIN W.-Nr. 1.4401
AISI 316
Installation:
Maximum ambient temperature: 328 K
Max pressure at stated temp:
30 bar / 90 °C
30 bar / 0 °C
Flange standard:
DIN
Pipe connection:
DN 125
Pressure stage:
PN 25/40
Flange size for motor:
FF500
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Printed from Grundfos CAPS [2013.03.059]
SIEMENS
IE3
2
75 kW
75 kW
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
50 Hz
3 x 380-420D/660-725Y V
136-122/78,0-70,0 A
680-680 %
0,9
2975 rpm
IE3 94,7%
94,7-94,7 %
94,8-94,8 %
94,1-94,1 %
55 (Protect. water jets/dust)
F
Others:
Net weight:
Gross weight:
736 kg
900 kg
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
95922429 CRN 150-6 50 Hz
H
[m]
CRN 150-6, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
220
200
180
160
140
120
100
100
80
80
60
60
40
40
20
20
0
0
0
20
40
60
P2
[kW]
80
100
120
140
160
180
Q [m³/h]
NPSH
[m]
80
16
70
14
60
12
50
10
40
8
30
6
20
4
10
2
0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Product name:
Product No:
EAN number:
Value
CRN 150-6 A-F-G-V-HBQV
95922429
5700838936506
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
H
[m]
CRN 150-6, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
220
200
180
160
Printed from Grundfos CAPS [2013.03.059]
100
150
Q [m³/h]
P2
[kW]
NPSH
[m]
15
40
10
20
5
0
0
100
150
60
28
18
8x
4x
472
380
F (DIN)
PN25-40/DN 125
550
380
344
275
G 1/2
G 1/2
L2
L3
+T
L1
TO AMPLIFIER
RELAY
TO AMPLIFIER
RELAY
+T
L1
+T
L2
L3
+T
+T
736 kg
50
+T
Others:
Net weight:
0
0
432
SIEMENS
IE3
2
75 kW
75 kW
50 Hz
3 x 380-420D/660-725Y V
136-122/78,0-70,0 A
680-680 %
0,9
2975 rpm
IE3 94,7%
94,7-94,7 %
94,8-94,8 %
94,1-94,1 %
55 (Protect. water jets/dust)
F
PTC
81U15340
20
0
555
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
Motor No:
40
20
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
Water
273 .. 363 K
293 K
998.2 kg/m³
60
40
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
80
60
820
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
328 K
30 bar / 90 °C
30 bar / 0 °C
DIN
F
DN 125
PN 25/40
FF500
100
80
1642
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
100
180
Material code:
Code for rubber:
120
43
Impeller:
Stainless steel
DIN W.-Nr. 1.4408
AISI 351
Stainless steel
DIN W.-Nr. 1.4401
AISI 316
G
V
140
220
Materials:
Pump housing:
2975 rpm
150 m³/h
134 m
6
HBQV
ISO 9906:1999 Annex A
6
A
A
270
Technical:
Speed for pump data:
Rated flow:
Rated head:
Impellers:
Shaft seal:
Curve tolerance:
Stages:
Pump version:
Model:
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Gross weight:
900 kg
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
95922429 CRN 150-6 50 Hz
432
820
555
550
F (DIN)
PN25-40/DN 125
8x
28
4x
18
180
270
G 1/2
220
1642
G 1/2
100
43
275
344
380
150
380
472
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
95922429 CRN 150-6 50 Hz
+T
+T
TO AMPLIFIER
RELAY
L1
+T
L2
+T
L3
+T
TO AMPLIFIER
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
+T
RELAY
L1
L2
L3
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89