CRNE5-8 A-P-G-V-HQQV 1x220-240 50HZ
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE

Position Qty. Description
1 CRNE 5-8 A-P-G-V-HQQV
Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
Note! Product picture may differ from actual product
Product No.: 96518483
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power transmission is via a split coupling. Pipework connection is via PJE
(Victaulic®) couplings.
The pump is fitted with a 1-phase, fan-cooled asynchronous motor.
The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
An external sensor can be connected if controlled pump operation based on for example flow, differential pressure or temperature is required.
A control panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The control panel has indicator lights for "Operation" and "Fault".
Communication with the pump is possible by means of the Grundfos GO Remote or the R100 remote control (accessories). The remote controls enable further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means of two coupling guards.
Printed from Grundfos CAPS [2013.03.059]
1/8

Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
Position Qty. Description
The pump head and flange for motor mounting is made in one piece (cast iron). The pump head cover is a separate component (stainless steel). The pump head has a combined 1/2" priming plug and air vent screw.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
Rotating seal ring material: Silicon carbide (SiC)
Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing offers good resistance against abrasive particles.
Secondary seal material: FKM (fluorocarbon rubber)
FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used in media without water.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface, and the shape of the blades ensure a high efficiency.
The pump has a stainless steel base mounted on a separate base plate. The base and base plate are kept in position by the tension of the staybolts which hold the pump together. The discharge side of the base has a combined drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate. The base is prepared for connection by means of PJE (Victualic®) couplings.
Printed from Grundfos CAPS [2013.03.059]
2/8

Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
Position Qty. Description
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is flange-mounted with tapped-hole flange (FT).
Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor requires no external motor protection. The motor control unit incorporates protection against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
The terminal box holds terminals for these connections:
pump start/stop input (potential-free contact)
remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA
10 V voltage supply for setpoint potentiometer, Imax = 5 mA
one analog sensor input, 0-10 V, 0(4)-20 mA
24 V voltage supply for sensor, Imax = 40 mA
one analog output
three digital inputs
one potential-free fault signal relay with changeover contact, reporting "Fault", "Operation" or
"Ready"
RS-485 GENIbus connection.
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Water
253 .. 363 K
293 K
998.2 kg/m³
2789 rpm
5.7 m³/h
36.1 m
HQQV
CE,TR
Materials:
Pump housing:
Impeller:
Stainless steel
DIN W.-Nr. 1.4408
AISI 316
ASTM A 351 CF 8M
Stainless steel
DIN W.-Nr. 1.4401
AISI 316
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp:
Flange standard:
Pipe connection:
Flange size for motor:
25 bar / 90 °C
25 bar / -20 °C
PJE
42,4 mm
FT100
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
80B
2
1.1 kW
Power (P2) required by pump: 1.1 kW
Printed from Grundfos CAPS [2013.03.059]
3/8

Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
Position Qty. Description
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
50 Hz
1 x 200-240 V
8,20-6,80 A
0,97
360-2840 rpm
IP55
F
Others:
Minimum efficiency index, MEI ≥: 0.57
Net weight:
Gross weight:
Shipping volume:
27 kg
29.9 kg
0.06 m3
Printed from Grundfos CAPS [2013.03.059]
4/8

Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
96518483 CRNE 5-8 50 Hz
H
[m]
CRNE 5-8, 1*230 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³ eta
[%]
30
25
20
40
35
60
55
100 %
50
45
15
10
30
20
1.0
0.8
0.6
0.4
0.2
0.0
5
25 %
0
0
P
[kW]
1.6
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
1.4
1.2
P1
10
Q [m³/h]
0
NPSH
[m]
8
7
6
P2
5
4
3
2
1
0
Printed from Grundfos CAPS [2013.03.059]
5/8
80
70
100
90
60
50
40

Description
Product name:
Product No:
EAN number:
Technical:
Speed for pump data:
Rated flow:
Rated head:
Impellers:
Shaft seal:
Approvals on nameplate:
Stages:
Pump version:
Model:
Materials:
Pump housing:
Value
CRNE 5-8 A-P-G-V-HQQV
96518483
5700396784120
2789 rpm
5.7 m³/h
36.1 m
8
HQQV
CE,TR
8
A
A
Impeller:
Stainless steel
DIN W.-Nr. 1.4408
AISI 316
ASTM A 351 CF 8M
Stainless steel
DIN W.-Nr. 1.4401
AISI 316
G
V
Material code:
Code for rubber:
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
Flange standard:
Connect code:
Pipe connection:
Flange size for motor:
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
313 K
25 bar / 90 °C
25 bar / -20 °C
PJE
P
42,4 mm
FT100
Water
253 .. 363 K
293 K
998.2 kg/m³
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
Motor No:
Others:
Minimum efficiency index, MEI ≥: 0.57
Net weight:
Gross weight:
27 kg
29.9 kg
Shipping volume:
Config. file no:
0.06 m3
96059463
80B
2
1.1 kW
1.1 kW
50 Hz
1 x 200-240 V
8,20-6,80 A
0,97
360-2840 rpm
IP55
F
PTC
85755105
Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
H
[m]
60
55
50
45
40
100 %
35
30
25
20
15
10
5
P
[kW]
0
0
25 %
1 2 3 4 5
CRNE 5-8, 1*230 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
6 7 Q [m³/h] eta
[%]
NPSH
[m]
70
60
50
40
30
20
10
0
100
90
80
P1
1.0
0.5
0.0
P2
4
2
0
Group 3
Group 2
231 425
ø42,2
Group 1
50
22
Printed from Grundfos CAPS [2013.03.059]
6/8

96518483 CRNE 5-8 50 Hz
178
167
Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
G 1/2
G 1/2
100
150
210
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
180
210
4 x ø13
7/8

96518483 CRNE 5-8 50 Hz
NC C ND N PE L
Company name: Lenntech BV - lenntech.com
Created by: info@lenntech.com
Phone:
Fax:
Date: -
+31 15 2610900
+31 15 2616289
0-10 V
0/4-20 mA
0/1
4-20 mA
1 9 8 7 B Y A
1:Digital input
9:GND (frame)
8:+24 V
7:Sensor input
B:RS-485B
Y:Screen
A:RS-485A
0/4-20 mA
STOP
RUN
0-10 V
10K
6:GND (frame)
5:+10 V
4:Setpoint input
3:GND (frame)
2:Start/stop
6 5 4 3 2
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
8/8

All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89