GRUNDFOS DATA BOOKLET
CR1-25 A-FGJ-A-E-HQQE 3x230/400 50HZ
Grundfos Pump 96516255
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRFAM/96516255/CR-1-25-A-FGJ-A-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CR 1-25 A-FGJ-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96516255
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
combined DIN-ANSI-JIS flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details
The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and air vent screw.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible
wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The discharge side of
the base has a combined drain plug and bypass valve. The pump is secured to the foundation by
four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with tapped-hole flange (FT).
Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
The motor does not incorporate motor protection and must be connected to a motor-protective
circuit breaker which can be manually reset. The motor-protective circuit breaker must be set
according to the rated current of the motor (I1/1).
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
253 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
2896 rpm
1.8 m³/h
120 m
HQQE
CE,TR
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp:
25 bar / 120 °C
25 bar / -20 °C
Flange standard:
DIN
Pipe connection:
DN 25 / DN 32
Pressure stage:
PN 16 / PN 25
Flange size for motor:
FT115
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Printed from Grundfos CAPS [2013.03.059]
90SB
IE3
2
1.5 kW
1.5 kW
1.5 kW
50 Hz
3 x 220-240 D/380-415 Y V
5,45/3,15 A
850-930 %
0,87-0,82
2890-2910 rpm
IE3 84,2%
84,2-84,2 %
84,5-83,9 %
83,1-81,0 %
55 (Protect. water jets/dust)
F
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Others:
Label:
Grundfos Blueflux
Minimum efficiency index, MEI ≥: 0.7
Net weight:
43.5 kg
Gross weight:
46.4 kg
Shipping volume:
0.11 m3
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96516255 CR 1-25 50 Hz
H
[m]
CR 1-25, 3*400 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
eta
[%]
90
160
80
140
70
120
60
100
50
80
40
60
30
40
20
20
10
0
0
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4
P
[kW]
NPSH
[m]
1.6
1.4
Q [m³/h]
8
P1
1.2
7
6
P2
1.0
5
0.8
4
0.6
3
0.4
2
0.2
1
0.0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
50
80
40
60
30
40
20
20
10
0
0
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
P
[kW]
NPSH
[m]
P1
P2
1.0
4
0.5
2
0.0
0
Printed from Grundfos CAPS [2013.03.059]
4 x ø13.5
220
250
ø35
180
141
19 x 24.5
100
178
G 1/2
L3
L2
L1
HIGH VOLTAGE
L3
L2
L1
DIRECTION OF ROTATION
90SB
IE3
2
1.5 kW
1.5 kW
1.5 kW
50 Hz
3 x 220-240 D/380-415 Y V
5,45/3,15 A
850-930 %
0,87-0,82
2890-2910 rpm
IE3 84,2%
84,2-84,2 %
84,5-83,9 %
83,1-81,0 %
55 (Protect. water jets/dust)
F
NONE
110
Water
253 .. 393 K
293 K
998.2 kg/m³
LOW VOLTAGE
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
DIRECTION OF ROTATION
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
60
100
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
333 K
25 bar / 120 °C
25 bar / -20 °C
DIN
FGJ
DN 25 / DN 32
PN 16 / PN 25
FT115
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
120
281
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
70
697
Material code:
Code for rubber:
80
140
75
Impeller:
160
eta
[%]
20
Materials:
Pump housing:
2896 rpm
1.8 m³/h
120 m
156 m
25
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 1
25
A
A
CR 1-25, 3*400 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
ø89
Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:
CR 1-25 A-FGJ-A-E-HQQE
96516255
5700396739557
H
[m]
ø100
Product name:
Product No:
EAN number:
Value
ø140
Description
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Motor No:
85U05906
Others:
Label:
Minimum efficiency index, MEI ≥:
Net weight:
Gross weight:
Shipping volume:
Grundfos Blueflux
0.7
43.5 kg
46.4 kg
0.11 m3
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96516255 CR 1-25 50 Hz
110
697
281
178
G 1/2
ø140
ø100
20
75
ø89
19 x 24.5
ø35
100
141
180
250
220
4 x ø13.5
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96516255 CR 1-25 50 Hz
LOW VOLTAGE
DIRECTION OF ROTATION
L1
L2
L3
HIGH VOLTAGE
DIRECTION OF ROTATION
L1
L2
L3
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89