GRUNDFOS DATA BOOKLET
CR15-07 A-F-A-E-HQQE 3x400D 50 HZ
Grundfos Pump 96501898
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRFAM/96501898/CR-15-7-A-F-A-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CR 15-7 A-F-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96501898
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
DIN flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details
The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and air vent screw.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The discharge side of
the base has a drain plug. The pump is secured to the foundation by four bolts through the base
plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The
protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any
duty point. Grundfos CUE offers a range of variable speed drives. Please find more information in
Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
253 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
2919 rpm
17 m³/h
77.9 m
HQQE
CE,TR
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp:
16 bar / 120 °C
16 bar / -20 °C
Flange standard:
DIN
Pipe connection:
DN 50
Pressure stage:
PN 16
Flange size for motor:
FF265
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Printed from Grundfos CAPS [2013.03.059]
132SC
IE3
2
5.5 kW
5.5 kW
5.5 kW
50 Hz
3 x 380-415 D V
11 A
1080-1180 %
0,87-0,82
2920-2940 rpm
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
IE3 89,2%
89,2-89,2 %
90,0-89,8 %
89,6-88,4 %
55 (Protect. water jets/dust)
F
Others:
Label:
Grundfos Blueflux
Minimum efficiency index, MEI ≥: 0.7
Net weight:
102 kg
Gross weight:
127 kg
Shipping volume:
0.43 m3
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96501898 CR 15-7 50 Hz
H
[m]
CR 15-7, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
100
90
80
70
60
50
100
40
80
30
60
20
40
10
20
0
0
0
2
4
6
8
10
12
14
16
18
20
22
Q [m³/h]
P
[kW]
NPSH
[m]
7
6
5
7
P1
P2
6
5
4
4
3
3
2
2
1
1
0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
70
60
50
100
40
80
30
60
20
40
10
20
0
0
0
5
10
P2
2
2
0
0
ø18.1
215
256
ø65
4 x ø13.5
4
130
176
300
G 1/2
G 1/2
Water
253 .. 393 K
293 K
998.2 kg/m³
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
Printed from Grundfos CAPS [2013.03.059]
L2
L3
+T
L1
+T
TO AMPLIFIER
RELAY
+T
TO AMPLIFIER
RELAY
132SC
IE3
2
5.5 kW
5.5 kW
5.5 kW
50 Hz
3 x 380-415 D V
11 A
1080-1180 %
0,87-0,82
2920-2940 rpm
IE3 89,2%
89,2-89,2 %
90,0-89,8 %
89,6-88,4 %
55 (Protect. water jets/dust)
F
PTC
+T
L1
+T
L2
L3
+T
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
NPSH
[m]
4
300
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Q [m³/h]
P1
220
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
20
P
[kW]
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
333 K
16 bar / 120 °C
16 bar / -20 °C
DIN
F
DN 50
PN 16
FF265
15
G 1/2
2919 rpm
17 m³/h
77.9 m
98.5 m
07
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 15
07
A
A
134
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
80
391
Material code:
Code for rubber:
90
677
Impeller:
100
eta
[%]
90
Materials:
Pump housing:
CR 15-7, 3*400 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
20
Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:
CR 15-7 A-F-A-E-HQQE
96501898
5700396231426
H
[m]
ø125
Product name:
Product No:
EAN number:
Value
ø165
Description
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Motor No:
85U17417
Others:
Label:
Minimum efficiency index, MEI ≥:
Net weight:
Gross weight:
Shipping volume:
Grundfos Blueflux
0.7
102 kg
127 kg
0.43 m3
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96501898 CR 15-7 50 Hz
134
391
220
300
G 1/2
677
G 1/2
130
176
300
ø65
ø165
90
20
ø125
ø18.1
G 1/2
4 x ø13.5
215
256
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96501898 CR 15-7 50 Hz
+T
+T
TO AMPLIFIER
RELAY
L1
+T
L2
+T
L3
+T
TO AMPLIFIER
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
+T
RELAY
L1
L2
L3
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89