GRUNDFOS DATA BOOKLET
CRE90-3 A-F-A-E-HQQE 3x400 50 HZ
Grundfos Pump 96124355
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRE90/96124355/CRE-90-3-A-F-A-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CRE 90-3 A-F-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96124355
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
DIN flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
The motor includes a frequency converter and PI controller in the motor terminal box. This enables
continuously variable control of the motor speed, which again enables adaptation of the
performance to a given requirement.
Further product details
An external sensor can be connected if controlled pump operation based on for example flow,
differential pressure or temperature is required.
The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means
of two coupling guards. The long coupling makes it possible to replace the shaft seal without
removing the motor from the pump.
Printed from Grundfos CAPS [2013.03.059]
1/8
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and air
vent screw.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is retained in the pump head by a cover and screws. It can be replaced without
removing the motor.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. Both the suction and the discharge side of the base have two
pressure gauge tappings. The pump is secured to the foundation by four bolts through the base
plate. The flanges are fastened to the base by means of locking rings.
Printed from Grundfos CAPS [2013.03.059]
2/8
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor requires no external motor protection. The motor control unit incorporates protection
against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
243 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
2947 rpm
90 m³/h
65.5 m
HQQE
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp:
16 bar / 120 °C
16 bar / -30 °C
Flange standard:
DIN
Pipe connection:
DN 100
Pressure stage:
PN 16
Flange size for motor:
FF300
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
180MB
2
22 kW
50 Hz
3 x 380-480 V
43,5-35,0 A
0,91-0,90
480-3540 rpm
IP55
F
Others:
Label:
Grundfos Blueflux
Minimum efficiency index, MEI ≥: 0.7
Printed from Grundfos CAPS [2013.03.059]
3/8
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Net weight:
Gross weight:
Printed from Grundfos CAPS [2013.03.059]
242 kg
293 kg
4/8
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96124355 CRE 90-3 50 Hz
H
[m]
CRE 90-3, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
110
100 %
100
90
80
70
60
50
100
40
80
30
60
20
40
10
20
25 %
0
0
0
10
20
30
40
50
60
70
80
90
100
110
120 Q [m³/h]
P
[kW]
25
NPSH
[m]
P1
25
P2
20
20
15
15
10
10
5
5
0
0
Printed from Grundfos CAPS [2013.03.059]
5/8
Company name:
Created by:
Phone:
Fax:
Date:
Description
Product name:
Product No:
EAN number:
Value
CRE 90-3 A-F-A-E-HQQE
96124355
5700396706696
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
H
[m]
110
CRE 90-3, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
100 %
100
90
80
80
100
Q [m³/h]
P
[kW]
P1
NPSH
[m]
20
P2
10
0
0
348
380
4 x ø14
ø100
280
DIN
5
8 x ø18
10
261
Grundfos Blueflux
0.7
242 kg
293 kg
95139514
60
199
Others:
Label:
Minimum efficiency index, MEI ≥:
Net weight:
Gross weight:
Config. file no:
40
G 1/2
180MB
2
22 kW
50 Hz
3 x 380-480 V
43,5-35,0 A
0,91-0,90
480-3540 rpm
IP55
F
85757530
20
PN16/DN100
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor No:
0
0
350
Water
243 .. 393 K
293 K
998.2 kg/m³
20
G 1/2
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
40
10 25 %
314
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
60
20
0
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
313 K
16 bar / 120 °C
16 bar / -30 °C
DIN
F
DN 100
PN 16
FF300
80
30
308
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
100
40
45
Material code:
Code for rubber:
50
ø220
Impeller:
60
ø156
Materials:
Pump housing:
70
2947 rpm
90 m³/h
65.5 m
3
HQQE
3
A
A
ø180
Technical:
Speed for pump data:
Rated flow:
Rated head:
Impellers:
Shaft seal:
Stages:
Pump version:
Model:
140
6: GND (frame)
5: +10 V
4: Setpoint input
3: GND (frame)
2: Start/stop
1: Digital input
9: GND (frame)
8: +24 V
7: Sensor input
B: RS-485B
Y: Screen
A: RS-485A
541
L1 L2 L3
865
6 5 4 3 2
10K
RUN
0-10 V
0/4-20 mA
B Y A
7
8 9 1
STOP
1/0
0-10 V
0/4-20 mA
4-20 mA
NC C2 NO
NC C1 NO
Group 3
Group 2
Group 1
Printed from Grundfos CAPS [2013.03.059]
6/8
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96124355 CRE 90-3 50 Hz
308
541
314
350
G 1/2
DIN
865
PN16/DN100
8 x ø18
199
45
ø100
261
280
380
348
ø220
ø180
140
ø156
G 1/2
4 x ø14
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
7/8
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
NC C2 NO
NC C1 NO
0-10 V
0/4-20 mA
4-20 mA
Group 1
1/0
B Y A
7 8 9 1
Group 3
Group 2
96124355 CRE 90-3 50 Hz
L1 L2 L3
1: Digital input
9: GND (frame)
8: +24 V
7: Sensor input
B: RS-485B
Y: Screen
A: RS-485A
STOP
RUN
0/4-20 mA
6: GND (frame)
5: +10 V
4: Setpoint input
3: GND (frame)
2: Start/stop
0-10 V
10K
6 5 4 3 2
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
8/8
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89