GRUNDFOS DATA BOOKLET
CR45-11-2 A-F-A-E-HQQE 3x400/690 50 HZ
Grundfos Pump 96122816
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRFAM/96122816/CR-45-11-2-A-F-A-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CR 45-11-2 A-F-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96122816
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
DIN flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means
of two coupling guards. The long coupling makes it possible to replace the shaft seal without
removing the motor from the pump.
The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming
plug and air vent screw.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible
wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is retained in the pump head by a cover and screws. It can be replaced without
removing the motor.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. Both the suction and the discharge side of the base have two
pressure gauge tappings. The pump is secured to the foundation by four bolts through the base
plate. The flanges are fastened to the base by means of locking rings.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The
protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the
motor is to be connected to a variable speed drive, the pump should be ordered with an electrically
insulated motor bearing. Grundfos CUE offers a range of variable speed drives. Please find more
information in Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
243 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
2960 rpm
45 m³/h
222 m
HQQE
CE,TR
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Cast iron
EN-JS1050
ASTM 80-55-06
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 328 K
Max pressure at stated temp:
30 bar / 120 °C
30 bar / -30 °C
Flange standard:
DIN
Pipe connection:
DN 80
Pressure stage:
PN 16 / PN 25 / PN 40
Flange size for motor:
FF400
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Printed from Grundfos CAPS [2013.03.059]
SIEMENS
IE3
2
45 kW
45 kW
50 Hz
3 x 380-420D/660-725Y V
81,0-74,0/47,0-43,0 A
690-690 %
0,9
2960 rpm
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
IE3 94,0%
94,0-94,0 %
94,5-94,5 %
94,4-94,4 %
55 (Protect. water jets/dust)
F
Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight:
455 kg
Gross weight:
506 kg
Shipping volume:
0.88 m3
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96122816 CR 45-11-2 50 Hz
H
[m]
CR 45-11-2, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
300
250
200
150
100
100
50
50
0
0
0
5
10
15
20
P2
[kW]
25
30
35
40
45
50
55
Q [m³/h]
NPSH
[m]
40
16
35
14
30
12
25
10
20
8
15
6
10
4
5
2
0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
Value
Product name:
Product No:
EAN number:
CR 45-11-2 A-F-A-E-HQQE
96122816
5700396688602
Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Impeller reduc.:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:
2960 rpm
45 m³/h
222 m
271 m
11
2
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 45
11
A
A
200
150
100
100
50
50
0
0
0
10
20
30
40
NPSH
[m]
6
20
4
10
2
0
0
ø80
G 1/2
266
331
8 x ø18
365
190
G 1/2
248
G 1/2
450
SIEMENS
IE3
2
45 kW
45 kW
50 Hz
3 x 380-420D/660-725Y V
81,0-74,0/47,0-43,0 A
690-690 %
0,9
2960 rpm
IE3 94,0%
94,0-94,0 %
94,5-94,5 %
94,4-94,4 %
55 (Protect. water jets/dust)
F
PTC
325
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Motor efficiency at 1/2 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
442
Water
243 .. 393 K
293 K
998.2 kg/m³
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
4 x ø14
30
708
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
Q [m³/h]
P2
[kW]
Cast iron
EN-JS1050
ASTM 80-55-06
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
328 K
30 bar / 120 °C
30 bar / -30 °C
DIN
F
DN 80
PN 16 / PN 25 / PN 40
FF400
50
1469
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
250
140
Material code:
Code for rubber:
300
eta
[%]
45
Impeller:
CR 45-11-2, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
ø200
Materials:
Pump housing:
H
[m]
ø120
ø160
Description
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
L2
L3
+T
L1
+T
TO AMPLIFIER
RELAY
+T
TO AMPLIFIER
RELAY
+T
L1
+T
L2
L3
+T
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
Printed from Grundfos CAPS [2013.03.059]
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Motor No:
81U15336
Others:
Minimum efficiency index, MEI ≥:
Net weight:
Gross weight:
Shipping volume:
0.7
455 kg
506 kg
0.88 m3
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96122816 CR 45-11-2 50 Hz
325
708
442
450
1469
G 1/2
G 1/2
190
45
ø80
248
266
365
331
ø160
140
ø120
G 1/2
ø200
8 x ø18
4 x ø14
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96122816 CR 45-11-2 50 Hz
+T
+T
TO AMPLIFIER
RELAY
L1
+T
L2
+T
L3
+T
TO AMPLIFIER
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
THERMISTORS PTC ACCORDING TO DIN 44082
+T
RELAY
L1
L2
L3
Note! All units are in [mm] unless others are stated.
Printed from Grundfos CAPS [2013.03.059]
9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89