GRUNDFOS DATA BOOKLET
CRE20-05 AN-F-A-E-HQQE 3x400 50 HZ
Grundfos Pump 96512946
Thank you for your interest in our products
Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRE20/96512946/CRE-20-5-AN-F-A-E-HQQE.html
info@lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CRE 20-5 AN-F-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96512946
Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
DIN flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
The motor includes a frequency converter and PI controller in the motor terminal box. This enables
continuously variable control of the motor speed, which again enables adaptation of the
performance to a given requirement.
Further product details
The pump is equipped with a pressure sensor registering pump discharge pressure and enabling
controlled pump operation based on constant pressure.
The product carries the Grundfos Blueflux® label. It represents the best from Grundfos within
energy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet or
exceed legislative requirements such as the EuP IE3 grade.
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
Printed from Grundfos CAPS [2013.03.059]
1/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and air vent screw.
The pressure sensor is fitted to the pump head.
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The discharge side of
the base has a drain plug. The pump is secured to the foundation by four bolts through the base
plate.
Printed from Grundfos CAPS [2013.03.059]
2/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with free-hole flange (FF).
Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor requires no external motor protection. The motor control unit incorporates protection
against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
Water
253 .. 393 K
293 K
998.2 kg/m³
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
2919 rpm
21 m³/h
58 m
HQQE
CE,TR
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp:
16 bar / 120 °C
16 bar / -20 °C
Flange standard:
DIN
Pipe connection:
DN 50
Pressure stage:
PN 16
Flange size for motor:
FF265
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Efficiency:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
132SC
2
5.5 kW
5.5 kW
50 Hz
3 x 380-480 V
11,0-8,80 A
0,94-0,93
360-3530 rpm
IE3 89,2%
IP55
F
Others:
Label:
Grundfos Blueflux
Printed from Grundfos CAPS [2013.03.059]
3/9
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
Qty. Description
Minimum efficiency index, MEI ≥: 0.7
Net weight:
96 kg
Gross weight:
124 kg
Printed from Grundfos CAPS [2013.03.059]
4/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96512946 CRE 20-5 50 Hz
H
[m]
CRE 20-5, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
80
75
100 %
70
65
60
55
50
100
45
90
40
80
35
70
30
60
25
50
20
40
15
30
10
20
25 %
5
10
0
0
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
Q [m³/h]
P
[kW]
NPSH
[m]
7
6
5
14
P1
P2
12
10
4
8
3
6
2
4
1
2
0
0
Printed from Grundfos CAPS [2013.03.059]
5/9
Company name:
Created by:
Phone:
Fax:
Date:
CRE 20-5 AN-F-A-E-HQQE
96512946
5700396621555
Technical:
Speed for pump data:
Rated flow:
Rated head:
Impellers:
Shaft seal:
Approvals on nameplate:
Stages:
Pump version:
Model:
2919 rpm
21 m³/h
58 m
05
HQQE
CE,TR
05
AN
A
100
90
80
70
60
50
40
30
20
10
0
5
10
15
20
25
Q [m³/h]
P1
P2
4
NPSH
[m]
10
2
5
0
0
ø65
215
256
ø18.1
300
130
176
300
G 1/2
G 1/2
Water
253 .. 393 K
293 K
998.2 kg/m³
G 1/2
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
220
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
313 K
16 bar / 120 °C
16 bar / -20 °C
DIN
F
DN 50
PN 16
FF265
188
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
eta
[%]
20
Material code:
Code for rubber:
75 100 %
70
65
60
55
50
45
40
35
30
25
20
15
10
25 %
5
0
0
P
[kW]
ø125
Impeller:
CRE 20-5, 3*400 V, 50Hz
Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m³
4 x ø13.5
Product name:
Product No:
EAN number:
Materials:
Pump housing:
H
[m]
Value
ø165
Description
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
90
L1 L2 L3
587
391
SUPPLY:
SEE NAMEPLATE
FOR FUTHER DATA
96086116
A:RS485 A
132SC
2
5.5 kW
5.5 kW
50 Hz
3 x 380-480 V
11,0-8,80 A
0,94-0,93
360-3530 rpm
IE3 89,2%
IP55
F
NONE
85757417
Controls:
Pressure sensor:
Y
Others:
Label:
Minimum efficiency index, MEI ≥:
Net weight:
Grundfos Blueflux
0.7
96 kg
Printed from Grundfos CAPS [2013.03.059]
0-10V
0/4-20mA
+OUT
+OUT
-
B:RS485 B
SIGNAL RELAY:
Max:250V/2A AC1
Min: DC 5V/1mA
STOP
7: SENSOR INPUT
4-20m A
RUN
8: +24V
1: DIGITAL INPUT
0/4-20m A
4: SETPOINT
0-10V
+
CONNECTION FOR
2: RUN/STOP
3: GND
9: GND
0/1
NC C NO
Y:SHIELD
Electrical data:
Motor type:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Cos phi - power factor:
Rated speed:
Efficiency:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
Motor No:
10K
5: +10V
6: GND
GRUNDFOS SENSOR
OPTIONAL
CONNECTION
FOR PC-TOOL
6/9
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Gross weight:
Config. file no:
124 kg
96115832
Printed from Grundfos CAPS [2013.03.059]
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
7/9
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96512946 CRE 20-5 50 Hz
188
391
220
300
G 1/2
587
G 1/2
130
176
300
ø65
ø165
90
20
ø125
ø18.1
G 1/2
4 x ø13.5
215
256
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos CAPS [2013.03.059]
8/9
-
Printed from Grundfos CAPS [2013.03.059]
+OUT
96086116
0/4-20mA
0-10V
1: DIGITAL INPUT
9: GND
8: +24V
7: SENSOR INPUT
GRUNDFOS SENSOR
CONNECTION FOR
OPTIONAL
0/1
4-20m A
B:RS485 B
Y:SHIELD
0/4-20m A
+
-
0-10V
10K
RUN
STOP
SIGNAL RELAY:
Max:250V/2A AC1
Min: DC 5V/1mA
L1 L2 L3
CONNECTION
FOR PC-TOOL
6: GND
5: +10V
4: SETPOINT
3: GND
2: RUN/STOP
NC C NO
A:RS485 A
SUPPLY:
SEE NAMEPLATE
FOR FUTHER DATA
Company name:
Created by:
Phone:
Fax:
Date:
Lenntech BV - lenntech.com
info@lenntech.com
+31 15 2610900
+31 15 2616289
-
96512946 CRE 20-5 50 Hz
Note! All units are in [mm] unless others are stated.
9/9
+OUT
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
info@lenntech.com
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89