Proposal 13574 (STScI Edit Number: 2, Created: Tuesday, July 22, 2014 8:02:32 PM EST) - Overview 13574 - WFC3 contamination & stability monitor Cycle: 21, Proposal Category: CAL/WFC3 (Availability Mode: RESTRICTED) INVESTIGATORS Name Dr. Sylvia M. Baggett (PI) (Contact) Dr. Derek Hammer (CoI) Dr. Susana E. Deustua (CoI) Ms. Jennifer Mack (CoI) Dr. Kai G. Noeske (CoI) Institution Space Telescope Science Institute Space Telescope Science Institute Space Telescope Science Institute Space Telescope Science Institute Space Telescope Science Institute E-Mail sbaggett@stsci.edu hammer@stsci.edu deustua@stsci.edu mack@stsci.edu noeske@stsci.edu VISITS Visit Targets used in Visit Configurations used in Visit Orbits Used Last Orbit Planner Run 01 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:01:50.0 OP Current with Visit? yes 02 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:01:55.0 yes 03 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:02.0 yes 04 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:06.0 yes 05 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:10.0 yes 06 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:14.0 yes 07 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:18.0 yes 08 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:22.0 yes 09 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:26.0 yes 10 (1) GRW+70D5824 WFC3/UVIS 1 22-Jul-2014 21:02:30.0 yes 1 Proposal 13574 (STScI Edit Number: 2, Created: Tuesday, July 22, 2014 8:02:32 PM EST) - Overview 10 Total Orbits Used ABSTRACT The photometric throughput of WFC3 is monitored periodically during the year to evaluate its stability. The data consist of spectrophotometric standard star images in the UVIS channel, in a subset of key filters plus the UVIS grism. The observation cadence, once every five weeks, is deliberately out of phase with the monthly anneal procedures (proposal 13554) in order to sample the phase space. Aperture photometry results are used to assess the UVIS flux stability as a function of time and wavelength. In conjunction with other programs, the data are also used in the photometric zeropoint determinations. OBSERVING DESCRIPTION The white dwarf spectrophotometric standard GRW+70d5824 is observed in both UVIS chips. Each iteration of the monitor requires 1 full orbit, repeated every 5 weeks. Images are obtained in subarray format in order to sample as many filters as possible. IR monitoring is performed as part of a separate program in order to minimize CSM (channel select mechanism) moves within visits. The core of this program are UVIS images taken with the primary UV filters (F218W, F225W, F275W, F336W, F438W): in the presence of contamination buildup, the bluest of these would show a decline in throughput first. A UV grism exposure along with the necessary reference image (F300X) are included as well. One visible filter exposure per chip (alternating F606W or F814W) are obtained as controls. The standard star is relatively bright requiring only short UVIS exposure times which will have low image backgrounds, so all images are post-flashed to mitigate CTE losses. To optimize use of the orbit, any unused visibility is applied to images exploring other aspects which can affect photometric results such as short exposure times and shutter blade in use. --------- Additional Comments ---------Due to lack of target visibility, the windows for visits 1 and 3 had to be shifted somewhat off the originally-planned 5-week cadence. To compensate and keep time coverage across these few months as even as possible, windows for visits 2 and 4 have been tweaked as well. To incorporate an on-orbit test of the BLADE parameter, a subset of exposures in Visit 9 have been adjusted to use BLADE. To allow for the test to occur during an otherwise BLADE-free time-period (currently identified as early Sep 2014), Visits 8,9,10 will not have the standard 5 week cadence but have their adjusted in order to cover Aug-Sep-Oct 2014 as evenly as possible. 2 Fixed Targets Patterns Visit Proposal 13574 - iteration 1 (01) - WFC3 contamination & stability monitor Proposal 13574, iteration 1 (01), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 03-DEC-2013:00:00:00 AND 15-DEC-2013:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f225w after pattern # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 3 Wed Jul 23 01:02:32 GMT 2014 Exposures (1), (2), (9), (10) (5), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 1 (01) - WFC3 contamination & stability monitor # 1 Exposures 2 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W 3 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 4 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 5 F275W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F275W 6 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 4 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 1 (01) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 1 (01) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 2 Secs (2 Secs) [==>] 4 Secs (4 Secs) [==>] Pattern 3, Exps 5-5 i 6.0 Secs (18 Secs) n iteration 1 (01) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) n iteration 1 (01) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 1 (01) ( [==>(Pattern 1)] 2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 1 (01) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 1 (01) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 5 Orbit Structure Proposal 13574 - iteration 1 (01) - WFC3 contamination & stability monitor 6 Fixed Targets Patterns Visit Proposal 13574 - iteration 2 (02) - WFC3 contamination & stability monitor Proposal 13574, iteration 2 (02), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 08-JAN-2014:00:00:00 AND 15-JAN-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 very short f438w # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 7 Wed Jul 23 01:02:32 GMT 2014 Exposures (1), (2), (9), (10) (3), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 2 (02) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 6 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 8 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 2 (02) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 2 (02) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 2 (02) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 0.5 Secs (0.5 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 0.5 Secs (0.5 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) n iteration 2 (02) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 2 (02) ( [==>(Pattern 1)] 2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 2 (02) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 2 (02) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 9 Orbit Structure Proposal 13574 - iteration 2 (02) - WFC3 contamination & stability monitor 10 Fixed Targets Patterns Visit Proposal 13574 - iteration 3 (03) - WFC3 contamination & stability monitor Proposal 13574, iteration 3 (03), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 28-JAN-2014:00:00:00 AND 03-FEB-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f225w UVIS2 after pattern # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 11 Wed Jul 23 01:02:33 GMT 2014 Exposures (1), (2), (7), (8) (3), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 3 (03) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 6 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 7 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 8 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 9 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 10 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 11 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 12 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 3 (03) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 3 (03) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 3 (03) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 7-7 i 17.6 Secs (70.4 Secs) n iteration 3 (03) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 8-8 i 6.3 Secs (25.2 Secs) n iteration 3 (03) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 2 Secs (2 Secs) [==>] 4 Secs (4 Secs) [==>] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 3 (03) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 3 (03) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 13 Orbit Structure Proposal 13574 - iteration 3 (03) - WFC3 contamination & stability monitor 14 Fixed Targets Patterns Visit Proposal 13574 - iteration 4 (04) - WFC3 contamination & stability monitor Proposal 13574, iteration 4 (04), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 14-MAR-2014:00:00:00 AND 20-MAR-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 intermediate f438w # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 15 Wed Jul 23 01:02:33 GMT 2014 Exposures (1), (2), (9), (10) (3), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 4 (04) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 6 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 16 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 4 (04) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 4 (04) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 4 (04) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 1.0 Secs (1 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 2.0 Secs (2 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) n iteration 4 (04) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 4 (04) ( [==>(Pattern 1)] 2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 4 (04) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 4 (04) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 17 Orbit Structure Proposal 13574 - iteration 4 (04) - WFC3 contamination & stability monitor 18 Fixed Targets Patterns Visit Proposal 13574 - iteration 5 (05) - WFC3 contamination & stability monitor Proposal 13574, iteration 5 (05), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 28-APR-2014:00:00:00 AND 04-MAY-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f225w around pattern # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 19 Wed Jul 23 01:02:33 GMT 2014 Exposures (1), (3), (9), (10) (5), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 5 (05) - WFC3 contamination & stability monitor Exposures # 1 Label Target F218W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W 2 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 3 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 4 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 5 F275W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F275W 6 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 20 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 5 (05) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 2. Secs (2 Secs) [==>] Pattern 2, Exps 3-3 i 6.3 Secs (25.2 Secs) n iteration 5 (05) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 4. Secs (4 Secs) [==>] Pattern 3, Exps 5-5 i 6.0 Secs (18 Secs) n iteration 5 (05) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] GS ACQ SCENARI Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) O BASE1B3 n iteration 5 (05) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 5 (05) ( [==>(Pattern 1)] 2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 5 (05) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 5 (05) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 21 Orbit Structure Proposal 13574 - iteration 5 (05) - WFC3 contamination & stability monitor 22 Fixed Targets Patterns Visit Proposal 13574 - iteration 6 (06) - WFC3 contamination & stability monitor Proposal 13574, iteration 6 (06), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 02-JUN-2014:00:00:00 AND 08-JUN-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f225w UVIS2 around pattern # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 23 Wed Jul 23 01:02:33 GMT 2014 Exposures (1), (2), (7), (9) (3), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 6 (06) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 6 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 7 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 8 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 9 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 10 F225W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W 11 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 24 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 6 (06) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 6 (06) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 6 (06) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] GS ACQ SCENARI Pattern 2, Exps 7-7 i 17.6 Secs (70.4 Secs) O BASE1B3 n iteration 6 (06) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 2 Secs (2 Secs) [==>] Pattern 2, Exps 9-9 i 6.3 Secs (25.2 Secs) n iteration 6 (06) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 4 Secs (4 Secs) [==>] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 6 (06) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 6 (06) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 25 Orbit Structure Proposal 13574 - iteration 6 (06) - WFC3 contamination & stability monitor 26 Fixed Targets Patterns Visit Proposal 13574 - iteration 7 (07) - WFC3 contamination & stability monitor Proposal 13574, iteration 7 (07), completed Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 07-JUL-2014:00:00:00 AND 13-JUL-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f336w # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 27 Wed Jul 23 01:02:33 GMT 2014 Exposures (1), (2), (9), (10) (3), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 7 (07) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 6 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 28 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] GS ACQ SCENARI Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) O BASE1B3 n iteration 7 (07) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 7 (07) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 7 (07) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 0.8 Secs (0.8 Secs) [==>] 4.0 Secs (4 Secs) [==>] 1.6 Secs (1.6 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] GS ACQ SCENARI Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) O BASE1B3 n iteration 7 (07) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 7 (07) ( [==>(Pattern 1)] 2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 7 (07) ( [==>(Pattern 1)] 3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 7 (07) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 29 Orbit Structure Proposal 13574 - iteration 7 (07) - WFC3 contamination & stability monitor 30 Fixed Targets Patterns Visit Proposal 13574 - iteration 8 (08) - WFC3 contamination & stability monitor Proposal 13574, iteration 8 (08), implementation Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 04-AUG-2014:00:00:00 AND 08-AUG-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f336w UVIS2 # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 31 Wed Jul 23 01:02:34 GMT 2014 Exposures (1), (2), (7), (8) (3), (9) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 8 (08) - WFC3 contamination & stability monitor # 1 2 Exposures 3 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W 4 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 5 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 6 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 7 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 8 9 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 10 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 11 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 32 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 8 (08) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 8 (08) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 8 (08) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 7-7 i 17.6 Secs (70.4 Secs) n iteration 8 (08) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 8-8 i 6.3 Secs (25.2 Secs) n iteration 8 (08) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 9-9 i 6.0 Secs (18 Secs) n iteration 8 (08) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 0.8 Secs (0.8 Secs) [==>] 4.0 Secs (4 Secs) [==>] 1.6 Secs (1.6 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 8 (08) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 33 Orbit Structure Proposal 13574 - iteration 8 (08) - WFC3 contamination & stability monitor 34 Fixed Targets Patterns Visit Proposal 13574 - iteration 9 (09) - WFC3 contamination & stability monitor Proposal 13574, iteration 9 (09), implementation Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 01-SEP-2014:00:00:00 AND 04-SEP-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 very short f438w in UVIS2 # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 35 Wed Jul 23 01:02:34 GMT 2014 Exposures (1), (2), (7), (8) (3), (9) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 9 (09) - WFC3 contamination & stability monitor # 1 2 3 4 Exposures 5 Label Target F218W-UVI (1) GRW+70D5824 S1 F225W-UVI (1) GRW+70D5824 S1 F275W-UVI (1) GRW+70D5824 S1 F336W-UVI (1) GRW+70D5824 S1 F438W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W F225W F275W F336W F438W 6 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 7 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 8 9 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 F336W-UVI (1) GRW+70D5824 S2 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W F336W F438W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0; BLADE=A CR-SPLIT=NO; FLASH=12.; BLADE=A CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0; BLADE=A CR-SPLIT=NO; FLASH=12.0; BLADE=B CR-SPLIT=NO; FLASH=12.0; BLADE=B 36 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 9 (09) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 2-2 i 6.3 Secs (25.2 Secs) n iteration 9 (09) (2) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 3-3 i 6.0 Secs (18 Secs) n iteration 9 (09) (3) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] Pattern 2, Exps 7-7 i n iteration 9 (09) (2) Pattern 2, Exps 8-8 i n iteration 9 (09) (2) Pattern 3, Exps 9-9 i n iteration 9 (09) (3) 1.3 Secs (1.3 Secs) [==>] 17.6 Secs (70.4 Secs) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 6.3 Secs (25.2 Secs) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 6.0 Secs (18 Secs) [==>(Pattern 1)] [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] 0.5 Secs (0.5 Secs) [==>] [1] Proposal 13574 - iteration 9 (09) - WFC3 contamination & stability monitor 12 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W CR-SPLIT=NO; FLASH=12.0; BLADE=B 13 F438W-UVI (1) GRW+70D5824 WFC3/UVIS, ACCUM, F438W CR-SPLIT=NO; S2 UVIS2-C512C-SUB FLASH=12.0 14 F814W-UVI (1) GRW+70D5824 WFC3/UVIS, ACCUM, F814W CR-SPLIT=NO; S2 UVIS2-C512C-SUB FLASH=12. 15 G280 refere (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. nce image ( SIZEAXIS2=768; F300X) suba rray on chip CENTERAXIS2=10 2 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 3.1 Secs (3.1 Secs) [==>] 1.0 Secs (1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] 1.0 Secs (1 Secs) [==>] [1] [1] [1] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 37 Orbit Structure Proposal 13574 - iteration 9 (09) - WFC3 contamination & stability monitor 38 Fixed Targets Patterns Visit Proposal 13574 - iteration 10 (10) - WFC3 contamination & stability monitor Proposal 13574, iteration 10 (10), implementation Diagnostic Status: No Diagnostics Scientific Instruments: WFC3/UVIS Special Requirements: SCHED 50%; BETWEEN 13-OCT-2014:00:00:00 AND 18-OCT-2014:23:59:59 Comments: single orbit covering UVIS1, UVIS2, and grisms from both channels plus 2 short f225w after pattern # Primary Pattern Secondary Pattern (2) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG BOX Pattern Orientation=23.884 Purpose=DITHER Angle Between Sides=81.785 Number Of Points=4 Center Pattern=false Point Spacing=0.173 Line Spacing=0.112 (3) Pattern Type=WFC3-UVIS-DITHER- Coordinate Frame=POS-TARG LINE-3PT Pattern Orientation=46.84 Purpose=DITHER Angle Between Sides= Number Of Points=3 Center Pattern=false Point Spacing=0.135 Line Spacing= # Name Target Coordinates Targ. Coord. Corrections (1) GRW+70D5824 RA: 13 38 51.1700 (204.7132083d) Proper Motion RA: -0.0798 sec of time/yr Alt Name1: PRIMARY Dec: +70 17 7.85 (70.28551d) Proper Motion Dec: -0.0262 arcsec/yr Equinox: J2000 Epoch of Position: 1991.25 39 Wed Jul 23 01:02:34 GMT 2014 Exposures (1), (3), (9), (10) (5), (11) Fluxes V=12.77 B-V = -9.0e-2 Miscellaneous Reference Frame: WFPC2 OBSERVATIONS Proposal 13574 - iteration 10 (10) - WFC3 contamination & stability monitor Exposures # 1 Label Target F218W-UVI (1) GRW+70D5824 S1 Config,Mode,Aperture WFC3/UVIS, ACCUM, UVIS1-C512A-SUB Spectral Els. F218W 2 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 3 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 4 F225W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F225W 5 F275W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F275W 6 F336W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F336W 7 F438W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F438W 8 F606W-UVI (1) GRW+70D5824 S1 WFC3/UVIS, ACCUM, UVIS1-C512A-SUB F606W 9 F218W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F218W 10 11 F225W-UVI (1) GRW+70D5824 S2 F275W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F225W F275W 12 F336W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F336W 13 F438W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F438W 14 F814W-UVI (1) GRW+70D5824 S2 WFC3/UVIS, ACCUM, UVIS2-C512C-SUB F814W Opt. Params. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12. CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12.0 CR-SPLIT=NO; FLASH=12. 40 Special Reqs. Groups Exp. Time (Total)/[Actual Dur.] Pattern 2, Exps 1-1 i 17.6 Secs (70.4 Secs) n iteration 10 (10) (2 [==>(Pattern 1)] ) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 2. Secs (2 Secs) [==>] Pattern 2, Exps 3-3 i 6.3 Secs (25.2 Secs) n iteration 10 (10) (2 [==>(Pattern 1)] ) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] 4. Secs (4 Secs) [==>] Pattern 3, Exps 5-5 i 6.0 Secs (18 Secs) n iteration 10 (10) (3 [==>(Pattern 1)] ) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 1.3 Secs (1.3 Secs) [==>] Pattern 2, Exps 9-9 i 17.6 Secs (70.4 Secs) n iteration 10 (10) (2 [==>(Pattern 1)] ) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 2, Exps 10-1 6.3 Secs (25.2 Secs) 0 in iteration 10 (10) [==>(Pattern 1)] (2) [==>(Pattern 2)] [==>(Pattern 3)] [==>(Pattern 4)] Pattern 3, Exps 11-1 6.0 Secs (18 Secs) 1 in iteration 10 (10) [==>(Pattern 1)] (3) [==>(Pattern 2)] [==>(Pattern 3)] 4.0 Secs (4 Secs) [==>] 3.1 Secs (3.1 Secs) [==>] 6.2 Secs (6.2 Secs) [==>] Orbit [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] Proposal 13574 - iteration 10 (10) - WFC3 contamination & stability monitor 15 G280 refere (1) GRW+70D5824 nce image ( F300X) suba rray on chip 2 WFC3/UVIS, ACCUM, UVIS F300X AMP=D; POS TARG 0.0,-50. SIZEAXIS2=768; CENTERAXIS2=10 26; FLASH=12.0 Comments: Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target near the center of chip 2. 1.0 Secs (1 Secs) [==>] [1] SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 16 G280 image, (1) GRW+70D5824 WFC3/UVIS, ACCUM, UVIS G280 SIZEAXIS2=768; POS TARG 0.0,-50. 40. Secs (40 Secs) chip2 CENTERAXIS2=10 [==>] 26; [1] AMP=D; FLASH=12.0 Comments: Only "UVIS" aperture is allowed with G280, so a postarg is used to move the target to UVIS2. Nominal "UVIS" aperture is ~10" above the chip gap on chip 1; a Y-postarg of about -50" places the target ne ar the center of chip 2. SIZEAXIS2=768 is used to minimize data volume, while CENTERAXIS2 is used to center the subarray readout on the target location. The latter is set to 1026, to place the vertical center of the subarray at the vertical center of chip 2. These parameters are based upon similar observations obtained successfully in Cycle 17 (proposal 11934). 41 Orbit Structure Proposal 13574 - iteration 10 (10) - WFC3 contamination & stability monitor 42