Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
WellPro.Z* Depth Cartridge Filter
For Well Injection Applications with Z.Plex* Technology
Typical Applications
•
Well injection
•
Produced water filtration
•
Water flood / enhanced oil recovery
•
Brine filtration
•
Sea water filtration
General Properties
Figure 1: Z.Plex Filter Technology
Description and Use
WellPro.Z Filters are available with four pore size
ratings. They are made of 100% polypropylene construction. Tables 1, 2 and 3 show further details on
dimensions, flow rate and crush rate of the
WellPro.Z.
Table 1: Dimensions
WellPro.Z* is manufactured using patent pending
Z.Plex filter technology (Figure 1) and is engineered
for well injection, produced water disposal and
other oil and gas applications. WellPro.Z’s proprietary filter matrix provides unmatched performance
in these applications.
Nominal
Outside Diameter
2.5” (6.4 cm)
•
•
Table 2: WellPro.Zs psid vs. Flow Rate1
psid
bar
1.0
0.65
Up to twice the life of conventional depth filters
0.9
.060
0.8
.055
Up to 50% lower pressure drop
0.7
.050
0.6
.040
0.5
.035
.030
•
Up to 100% greater dirt holding capacity
•
Superior protection of geologic strata
0.4
•
Optimized exterior decreases premature loading
0.3
.020
0.2
.014
0.1
.007
0
0
•
Excellent temperature / oil resistance
•
Provides lower total cost of filtration operations
Nominal
Inside Diameter
1” (2.5 cm)
gpm
1
2
3
4
5
lpm
3.8
7.6
11.4
15.2
19
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2010, General Electric Company. All rights reserved.
FS1096EN.doc Aug-10
Table 3: Temperature vs. Crush Strength1
psid
bar
100
7.0
90
6.2
80
5.5
70
4.8
60
4.1
50
3.5
40
2.8
30
2.1
20
1.4
10
0.7
0
0.0
1 Data
Ordering Information
If you are ordering WellPro.Zs filters with standard
ends (with no adapter on either end), select one
designation from each of the first three columns.
Your Product Order Number will look like this: WP.Zs
05-40. If you are ordering WellPro.Zs with end
adapters, select designations from all applicable
columns. Your Product Order Number will look like
this: WP.Zs 05-40 XK. See further ordering details in
Table 4.
Additional Information
based on 10” length filter
Micron Ratings, Lengths and End Adapters
•
•
Micron ratings: 1, 5, 10 and 20 micron
Standard lengths fit most housings – custom
lengths are also available
•
Wide range of end adapters including selfsealing spring, and 222 o-rings.
WellPro.Zs cartridge filters are made from
thermally-bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the
manufacture of these cartridges.
GE filter cartridges are designed and manufactured
for resistance to a wide range of chemical solutions.
Conditions will vary with each application and users
should carefully verify chemical compatibility.
Please contact your GE representative for more
information.
Table 4: Ordering Information
Type
Micron Rating
(µm)
Cartridge Length
Inches (cm)
WP.Z
01 = 1
05 = 5
19 ½ (49.5)
20 (50.8)
I.D. = 1.0
0.D. = 2.5
10 = 10
20 = 20
29 (74.3)
30 (76.2)
40 (101.6)
2Viton
End #1 Adapter
E=
X=
222 O-Ring
Standard Plain
End (no gasket)
End #2 Adapter
Material
K = Self Seal Spring
H = Fin
O-Rings
S = Silicone
S=
X=
E = EPDM
V = Viton2
B = Buna
Solid End
Standard Plain
End (no gasket)
is a registered trademark of DuPont.
Lenntech
Page 2
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
FS1096EN.doc Aug-10
The below GE ‐series cartridge filters are all the models that are potentially possible in all variations.
Please note that not all models are actually produced or on stock and some model numbers and names have becom
Nevertheless this should help as cross reference table chart for GE filters nomenclature.
WellPro.Z
WP.Z0119 1/2E WP.Z0519 1/2E WP.Z1019 1/2E WP.Z2019 1/2E
WP.Z0119 1/2E WP.Z0519 1/2E WP.Z1019 1/2E WP.Z2019 1/2E
WP.Z0119 1/2E WP.Z0519 1/2E WP.Z1019 1/2E WP.Z2019 1/2E
WP.Z0119 1/2EXWP.Z0519 1/2EXWP.Z1019 1/2EXWP.Z2019 1/2EX
WP.Z0119 1/2X WP.Z0519 1/2X WP.Z1019 1/2X WP.Z2019 1/2X
WP.Z0119 1/2X WP.Z0519 1/2X WP.Z1019 1/2X WP.Z2019 1/2X
WP.Z0119 1/2X WP.Z0519 1/2X WP.Z1019 1/2X WP.Z2019 1/2X
WP.Z0119 1/2X WP.Z0519 1/2X WP.Z1019 1/2X WP.Z2019 1/2X
WP.Z0120EK WP.Z0520EK WP.Z1020EK WP.Z2020EK
WP.Z0120EH WP.Z0520EH WP.Z1020EH WP.Z2020EH
WP.Z0120ES WP.Z0520ES WP.Z1020ES WP.Z2020ES
WP.Z0120EX WP.Z0520EX WP.Z1020EX WP.Z2020EX
WP.Z0120XK WP.Z0520XK WP.Z1020XK WP.Z2020XK
WP.Z0120XH WP.Z0520XH WP.Z1020XH WP.Z2020XH
WP.Z0120XS WP.Z0520XS WP.Z1020XS WP.Z2020XS
WP.Z0120XX WP.Z0520XX WP.Z1020XX WP.Z2020XX
WP.Z0129EK WP.Z0529EK WP.Z1029EK WP.Z2029EK
WP.Z0129EH WP.Z0529EH WP.Z1029EH WP.Z2029EH
WP.Z0129ES WP.Z0529ES WP.Z1029ES WP.Z2029ES
WP.Z0129EX WP.Z0529EX WP.Z1029EX WP.Z2029EX
WP.Z0129XK WP.Z0529XK WP.Z1029XK WP.Z2029XK
WP.Z0129XH WP.Z0529XH WP.Z1029XH WP.Z2029XH
WP.Z0129XS WP.Z0529XS WP.Z1029XS WP.Z2029XS
WP.Z0129XX WP.Z0529XX WP.Z1029XX WP.Z2029XX
WP.Z0130EK WP.Z0530EK WP.Z1030EK WP.Z2030EK
WP.Z0130EH WP.Z0530EH WP.Z1030EH WP.Z2030EH
WP.Z0130ES WP.Z0530ES WP.Z1030ES WP.Z2030ES
WP.Z0130EX WP.Z0530EX WP.Z1030EX WP.Z2030EX
WP.Z0130XK WP.Z0530XK WP.Z1030XK WP.Z2030XK
WP.Z0130XH WP.Z0530XH WP.Z1030XH WP.Z2030XH
WP.Z0130XS WP.Z0530XS WP.Z1030XS WP.Z2030XS
WP.Z0130XX WP.Z0530XX WP.Z1030XX WP.Z2030XX
WP.Z0140EK WP.Z0540EK WP.Z1040EK WP.Z2040EK
WP.Z0140EH WP.Z0540EH WP.Z1040EH WP.Z2040EH
WP.Z0140ES WP.Z0540ES WP.Z1040ES WP.Z2040ES
WP.Z0140EX WP.Z0540EX WP.Z1040EX WP.Z2040EX
WP.Z0140XK WP.Z0540XK WP.Z1040XK WP.Z2040XK
WP.Z0140XH WP.Z0540XH WP.Z1040XH WP.Z2040XH
WP.Z0140XS WP.Z0540XS WP.Z1040XS WP.Z2040XS
WP.Z0140XX WP.Z0540XX WP.Z0140XX WP.Z2040XX
Lenntech B.V.
T +31‐15‐261.09.00
F +31‐15‐261.62.89
info@lenntech.com
www.lenntech.com
Rotterdamseweg 402 1238935
1238934
1238933
1238932
1238939
1238938
1238937
1238936
1238943
1238942
1238941
1238940
1238947
1238946
1238945
1238944
1238951
1238950
1238949
1238948
1238955
1238954
1238953
1238952
1238960
1238959
1238958
1238957
1238964
1238963
1238962
1238961
1238968
1238967
1238966
1238965
1238972
1238971
1238970
1238969
WP.Zs 20-19 1/2
WP.Zs 10-19 1/2
WP.Zs 05-19 1/2
WP.Zs 01-19 1/2
WP.Zs 20-20
WP.Zs 10-20
WP.Zs 05-20
WP.Zs 01-20
WP.Zs 20-29 1/4
WP.Zs 10-29 1/4
WP.Zs 05-29 1/4
WP.Zs 01-29 1/4
WP.Zs 20-30
WP.Zs 10-30
WP.Zs 05-30
WP.Zs 01-30
WP.Zs 20-40
WP.Zs 10-40
WP.Zs 05-40
WP.Zs 01-40
WP.Zs 20-19 1/2 XK
WP.Zs 10-19 1/2 XK
WP.Zs 05-19 1/2 XK
WP.Zs 01-19 1/2 XK
WP.Zs 20-20 XK
WP.Zs 10-20 XK
WP.Zs 05-20 XK
WP.Zs 01-20 XK
WP.Zs 20-29 1/4 XK
WP.Zs 10-29 1/4 XK
WP.Zs 05-29 1/4 XK
WP.Zs 01-29 1/4 XK
WP.Zs 20-30 XK
WP.Zs 10-30 XK
WP.Zs 05-30 XK
WP.Zs 01-30 XK
WP.Zs 20-40 XK
WP.Zs 10-40 XK
WP.Zs 05-40 XK
WP.Zs 01-40 XK