®
Lenntech
info@lenntech.com
www.lenntech.com
Tel. +31-15-261.09.00
Fax. +31-15-261.62.89
#20
Opaque
#10 Clear
SLIM LINE ® FILTER H OUS INGS
• Slim design reduces space required for installation without sacrificing capacity
• Available in 5", 10", and 20" lengths
#5 Clear
#5 Opaque
#10
Opaque
• FDA Grade
• Optional pressure relief button on inlet side of cap
• Leak-proof seal with top-seated o-ring
• Available with clear or opaque sumps
Slim Line ®
available in either reinforced
polypropylene or clear StyreneAcrylonitrile (SAN) in 5", 10"
and 20" lengths. The black or blue
reinforced polypropylene housing
caps are available with 1/4", 3/8"
or 1/2" NPT connections. Four
bosses are molded into every cap for
mounting purposes.
They are equipped with a black,
reinforced polypropylene cap and
offer an optional pressure-relief
button on the inlet side to relieve
pressure inside the housing when
Slim Line ®
applications and when space and
chemical compatibility are
primary concerns.
Opaque Slim Line ® Filter Housings
Molded from rugged reinforced
polypropylene, Opaque Slim Line ®
chemical compatibility and are ideal
applications. These applications
include under-sink and countertop
service and humidifying systems.
Clear Slim Line
®
Filter Housings
performance, and cartridge life.
They are also ideal for a variety
of applications.
Manufactured of clear StyreneAcrylonitrile (SAN), the sumps are
annealed to relieve stress, adding
clarity and strength.
Slim line®
Filter Housings
OF
- J
JN
4
M
"QQSPYJNBUF/FU1SFTTVSF%SPQoQTJ#BS
4
F
JO
-
MJN
The 158005, 158006, 158114, 158115, 158120, 158125,
158126, 158128, 158129, 158131,158149, 158195,
158196, 158204, and 158205 are Tested and Certified by
NSF International to NSF/ANSI Standard 42 for material
and structural integrity requirements.
'MPX3BUFoHQN-QN
Housing Specifications and Performance Data
model
maximum Dimensions
initial ∆P (psi) @ Flow rate (gpm)
#5 Clear
73⁄8" x 45⁄8" (187 mm x 118 mm)
1/4" NPT–2 psi @ 3 gpm (0.14 bar @ 11 Lpm)
#10 Clear
121⁄8" x 45⁄8" (308 mm x 118 mm)
3/8" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
#5 Opaque
7" x 4 ⁄8" (178 mm x 111 mm)
1/4" NPT–2 psi @ 3 gpm (0.14 bar @ 11 Lpm)
#10 Opaque
113⁄4" x 43⁄8" (299 mm x 111 mm)
1/2" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
#20 Opaque
21 ⁄8" x 4 ⁄8" (556 mm x 111 mm)
1/2" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
3
7
3
materials of Construction
Housing
SAN (Clear) or Polypropylene (Opaque)
Cap
Reinforced Polypropylene
Button Assembly
300-series Stainless Steel, EPDM, and Polypropylene
O-Ring
Buna-N
Maximum Temperature
125ºF (51.7ºC)
Maximum Pressure
125 psi (8.62 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Lenntech bv
©2006 Pentair Filtration, Inc.
Rotterdamseweg 402m
2629HH Delft
The Netherlands
info@lenntech.com
www.lenntech.com
Tel. +31-15-261.09.00
Fax. +31-15-261.62.89
Printed in USA MR06 310050