Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
INDUSTRIAL C88
6-ROUND LIQUID CARTRIDGE HOUSINGS
C88 6-Round Liquid Cartridge Housings give the versatility of choosing cartridges for the
needed flow rates, chemical compatibility and particle retention.
FEATURES/BENEFITS
ccommodates 6 elements in 20”, 30” or
A
40” (254, 508, 762, 1016 mm) lengths
Flow rates to 120 gpm (454.2 Lpm)
Buna-N lid seal
316 Stainless Steel cup and spring
assemblies
150 PSI (10.3 bar) and 300 PSI (20.7 bar)
pressure ratings
Differential, drain, and vent ports
Carbon or Stainless Steel construction
Two-part epoxy paint inside and outside
on carbon steel housings
Zinc-plated quick-swing closure
with eye nuts
300 PSI (20.7 bar) housing has a slip and
blind flange lid
Adjustable support legs
316 Stainless Steel center guide post
ade to accept double open end
M
cartridges (DOE) or 222 style with closed
top cap*
APPLICATIONS
Commercial
General Industrial
Cup & Spring
Assembly
OPTIONS
Cartridge
Duplexing for continual flow during maintenance
Higher pressure rating
226 style cartridge compatibility
Center
Guide Post
Fin style top
Bottom Cup
ASME Code U or UM
Tube Sheet
* Note: Type of element top which will be used must be noted at the time of the housing order.
FILTRATION & PROCESS
C88 6-ROUND LIQUID CARTRIDGE HOUSINGS
PRESSURE DROP VS FLOW RATE
0.75”/1”
10
(0.69)
1.25”/1.5“
2”
3”
8
(0.56)
Differential Pressure
psi (Bar)
6
(0.41)
4
(0.26)
2
(0.14)
4”
1
(0.07)
0.8
(0.06)
0.6
(0.04)
0.4
(0.03)
0.2
(0.01)
0
10
(0.6)
15
(1)
20
25 30
40
50
60
(1.3) (1.6) (1.9) (2.5) (3.2) (3.8)
80
(5)
100 150 200 250 300 400 500
(6.3) (9.5) (12.6) (15.8) (19) (25) (31.5)
Flow Rate – gpm (Lpm)
DIMENSIONS
HOUSING
CARTRIDGE
QUANTITY
CARTRIDGE
LENGTH
CONNECTION
SIZE (IN.)
2
20”
3
4
2
C88
6
30”
3
4
2
40”
3
4
METRIC
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
IN
MM
A
5.8
146
5.9
149
5.7
145
5.8
146
5.9
149
5.7
145
5.8
146
5.9
149
5.7
145
B
6.8
171
6.9
175
6.9
175
6.8
171
6.9
175
6.9
175
6.8
171
6.9
175
6.9
175
All dimensions are approximate.
FILTRATION & PROCESS
C88 6-ROUND LIQUID CARTRIDGE HOUSINGS
DIMENSIONS
C
D
23.7
24.6
602
624
24.0
24.8
610
630
24.1
24.9
613
633
33.7
34.6
856
878
34.0
34.8
864
884
34.1
34.9
867
887
43.7
44.6
1,110
1,132
44.0
44.8
1,118
1,138
44.1
44.9
1,121
1,141
E
20.0
508
20.6
524
21.3
540
30.0
762
30.6
778
31.3
794
41.3
1,048
51.3
1,302
61.3
1,556
F
26.3
667
27.5
699
28.8
730
36.3
921
37.5
953
38.8
984
48.8
1,238
58.8
1,492
68.8
1,746
STYLE
STYLE
A
- BOTTOM
OUTLET
OUTLET
STYLE
A -A-BOTTOM
BOTTOM
OUTLET
Threaded
Threaded
STYLE
STYLE
B -BSIDE
-B
SIDE
OUTLET
STYLE
-OUTLET
SIDE
OUTLET
Flanged
Flanged
FLANGED
150
150
lb A.N.S.I.
lb A.N.S.I.
THREADED
NPT
NPT
NPT
Threaded
Threaded
150 LB A.N.S.I.
ADJUSTABLE LEGS
Flanged
Flanged
FLANGED
150150
lb A.N.S.I.
lb A.N.S.I.
THREADED
NPT
NPT
NPT
150 LB A.N.S.I.
12”
(305 mm)
AA
AA
B B
ININ
B B
ININ
ININ
ININ
22”
(559 mm)
E E
E E
CC
DD
F F
F F
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
ORDERING INFORMATION
To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
HOUSING EXAMPLE: C88202NBCD15U
C88 housing (C88), 20” length (20), 2” (2), NPT connection (N)
Outlet location on opposite side (B), Carbon steel (C), Double open ended element (D)
150 psi (15), ASME Code (U) Stamp (U)
C88 20 2
HOUSING
C88
N
LENGTH
(IN.)
CONNECTION
(IN.)
CONNECTION
TYPE
OUTLET
LOCATION
20
30
40
2
3
4
N = NPT
F = Flange
A = Bottom
B = Opposite Side
B
C
MATERIAL
C = Carbon Steel
4 = 304 SS
4L= 304L SS
6 = 316 SS
6L = 316L SS
D
15
ELEMENT
BASE*
ELEMENT
TOP
D = DOE
22 = 222 Style
26 = 226 Style
S = Single Open End
F = Fin Style
None = DOE
U
PSI
15 = 150
30 = 300
ASME
CODE
U = (U) Stamp
UM = (UM) Stamp
None = No Stamp
Note: If DOE, it is only required once in the part number and will specify both top and base. Cartridges are not included but must be specified as to the
type using when ordering the housing. Carbon steel not recommended for water use as the epoxy coating is not designed as a corrosion inhibitor.
FILTRATION & PROCESS
C88 6-ROUND LIQUID CARTRIDGE HOUSINGS
Lenntech
FILTRATION & PROCESS
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their
respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
Pentair is an equal opportunity employer.
4003024 Rev D DE14 © 2014 Pentair Residential Filtration, LLC. All rights reserved.