1
If you are still experiencing problems connecting a Windows laptop to the
classroom display, you may need to configure your display settings on your
laptop.
1) Your laptop must be connected to the classroom display system using the
provided VGA cable at the teaching station.
2) You need to “right click” on the desktop. If you have a trackpad you will do
this by pressing down with two fingers on the trackpad.
3) This will open the window shown here.
Learning Technology Services, UW-Stout, Thursday, January 29, 2015
2
4) Drop down to Graphics Options.
5) Drop to Output To.
6) Click Clone Displays.
Learning Technology Services, UW-Stout, Thursday, January 29, 2015
3
7) Select Built-in Display + Digital Display.
8) Your laptop will be set and the configuration should hold for the next time
you connect to the display system as well. You may need to take the
DisplayPort adapter out from the back of the computer and re-insert it. You
may need to press the Windows Key + the P key and then select duplicate.
Learning Technology Services, UW-Stout, Thursday, January 29, 2015