Equipm
E
ment and
a Teechniccal Gu
uide foor:
IT11 (7
7511) Autom
A motivee Serviice
(Auttomotiive Seervice Techn
nologyy I)
Return to the Eq
quipment an
nd Technicaal Guide hoome page
Categorr
y
Iteem
Quantit
Q
y
Reequire
d?
equipme
nt
1" carbon
n scraper 4C
4
yess
equipme
nt
1" gaskett scraper
4
4C
yess
equipme
nt
1-1/2 ton
n floor
jack
4
4C
yess
equipme
nt
1/2" drill,
variable speed,
s
reversiblee,
portable, corded
1C
yess
equipme
nt
1/2"-driv
ve socket
wrench set
4
4C
yess
equipme
nt
1/2"-driv
ve socket
wrench set,
10mm - 25mm
2
standard depth &
deep
4
4C
yess
equipme
nt
1/2"-driv
ve socket
wrench set, 7/16"
to 1-1/8"
4
4C
standard depth &
deep
yess
Esstimat
ed
d Cost
Coonta
ct
Wh
hom
?
Contact
Infoormation
Note
s
tool
1/2"-drive torque
wrench (50-250
lb. ft.)
1C
yes
equipme
nt
1/4" drive socket
wrench set,
flex/universal
type
4C
yes
tool
1/4"-drive socket
wrench set, 1/4"
- 1/2" standard
depth & deep
4C
yes
Quantit
y
Require
d?
tool
1/4"-drive socket
wrench set, 6mm
- 12mm standard
depth and deep
4C
yes
tool
12" adjustable
wrench
4C
yes
equipme
nt
12V test light
4C
yes
tool
25 watt pencil-tip
1C
soldering iron
yes
equipme
nt
3" & 6"
extensions for
1/4"-drive socket
wrench
4C
yes
equipme
nt
3", 6" & 12"
extensions for
1/2"-drive socket
wrench
4C
yes
equipme
nt
3", 6", 12" & 18"
extensions for
3/8"-drive socket
wrench set
4C
yes
Categor
y
Item
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
tool
3/8" drill,
variable speed,
portable,
reversable,
cordless
2C
yes
equipme
nt
3/8" drive socket
wrench set, 9mm
- 19mm standard
depth + deep
4C
yes
tool
3/8"-drive air
ratchet
4C
yes
Quantit
y
Require
d?
tool
3/8"-drive socket
set, 5/16" and
3/4" standard
depth (6 point) +
deep
4C
yes
tool
3/8"-drive torque
wrench (10-250
lb. in.)
1C
yes
tool
3/8"-drive torque
wrench (5 - 75
lb. ft.)
1C
yes
equipme
nt
5/16" Cape
chisel and 3/8",
3/4" cold chisel
4C
yes
equipme
nt
6" & 12"
extensions for
1/2"-drive socket
wrench
4C
yes
tool
6" adjustable
wrench
4C
yes
equipme
nt
Air blow gun
(meeting OSHA
requirements)
4C
yes
Categor
y
Item
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
equipme
nt
Air chisel
(various bits)
1C
yes
equipme
nt
Air compressor
and hoses
1C
yes
equipme
nt
Air pressure
regulator
1C
yes
Quantit
y
Require
d?
tool
Automotive
stethoscope
(electronic
recommended)
1C
yes
tool
Axle stands
(safety stands)
8C
yes
tool
Battery charger
1C
yes
equipme
nt
Battery post
cleaner
1C
yes
equipme
nt
Battery terminal
pliers and puller
1C
yes
tool
Belt tension
gauge
1C
yes
equipme
nt
Bench or
pedestal grinder
1C
yes
equipme
nt
Brake spoon
4C
yes
equipme
nt
Brass drift punch
4C
yes
tool
Center punch
4C
yes
Categor
y
Categor
y
Item
Item
Quantit
y
Require
d?
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
equipme
nt
Chisel holder
4C
yes
equipme
nt
Claw type
pickup tool
2C
yes
tool
Combination
wrench set,
standard (1/4"1") and metric
(7mm - 19mm)
4C
yes
tool
Compression
tester
1C
yes
equipme
nt
Computer scan
tool (hand held)
or personal
computer (PC)
with interface
1C
capability for onboard diagnostics
(OBD II
compliant
recommended)
yes
tool
Constant velocity
joint (CV)
service tools:
1C
boot clamp pliers
or crimping ring
yes
tool
Constant velocity
joint (CV)
service tools:
1C
boot installation
tool
yes
equipme
nt
Coolant/combust
ion gas detector
(recommended)
1C
yes
tool
Cooling system
pressure tester
and adapters
1C
yes
tool
Creeper
4C
yes
Categor
y
Item
Quantit
y
Require
d?
equipme
nt
Crowfoot wrench
set, metric &
2C
standard
yes
tool
Cylinder leakage
tester
1C
yes
tool
Depth
micrometer
1C
yes
equipme
nt
Dial indicator
with flex arm
and clamp base
1C
yes
equipme
nt
Digital
multimeter with
various lead sets
2C
yes
tool
Drain pan
4C
yes
tool
Drill bit set,
twist, 1/64" and
1/2"
2C
yes
equipme
nt
Ear protection
1S
yes
equipme
nt
Engine coolant
recovery
equipment
(recycler or
coolant disposal
contract service)
1C
yes
tool
Extension cord
4C
yes
Categor
y
tool
Item
Quantit
y
External &
1C
internal snap ring
Require
d?
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
pliers
tool
Face shield
4C
yes
equipme
nt
Feeler gauge
(blade type),
0.002" - 0.040";
0.006mm - 0.070
mm
4C
yes
tool
Fender covers
6C
yes
equipme
nt
Files, coarse, 6"
& 12"; fine 6"
and 12"; half
round 6" & 12"
and round, 6" &
12"
4C
yes
equipme
nt
Flare nut
(tubing)
wrenches, 3/8" 3/4" and 10mm 17mm
2C
yes
tool
Flashlight
4C
yes
equipme
nt
Flex handle
(breaker bar) for
1/2"-drive socket
wrench
4C
yes
equipme
nt
Flexhead ratchet
for 3/8"-drive
socket wrench
4C
yes
equipme
nt
Flexible socket
set for 3/8" drive
socket wrench,
3/8" - 3/4" &
9mm - 19mm
4C
yes
Quantit
y
Require
d?
4C
yes
Categor
y
tool
Item
Fuse puller
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
tool
Hacksaw
4C
yes
equipme
nt
Hammer, ball
peen 16 oz,
2C
brass, dead blow,
plastic...
yes
tool
Hand-held
vacuum pump
1C
yes
tool
Hand-operated
bearing packer
1C
yes
equipme
nt
Hex key (Allen
wrench) set,
standard (0.050"
- 3/8") and
metric (2mm 7mm)
4C
yes
equipme
nt
Hoist
1C
yes
tool
Hot plate or
equivalent
1C
yes
equipme
nt
Hydraulic press
with adapters (25 1C
ton)
yes
equipme
nt
Ignition wrench
set - standard and 2C
metric
yes
Categor
y
Item
Quantit
y
Require
d?
equipme
nt
Impact
screwdriver set
4C
yes
tool
Impact socket
set, 3/8" drive
(standard and
metric)
2C
yes
tool
Impact sockets,
2C
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
1/2" drive (7/16"
- 1-1/8") &
(12mm-32mm)
equipme
nt
Impact wrench,
1/2" drive & 3/8" 2C
drive
yes
equipme
nt
Inspection mirror 2C
yes
tool
Jumper cables
1C
yes
equipme
nt
Jumper wire set
(with various
adapters)
2C
yes
equipme
nt
Magnetic pickup
tool
2C
yes
tool
Master puller set
1C
yes
tool
Micrometers, 01", 1-2", 2-3", 34" and 4-5"
1C
yes
Categor
y
Item
Quantit
y
Require
d?
tool
Oil filter wrench
2C
yes
tool
Oil waste
receptacle with
extension neck
and funnel
1C
yes
equipme
nt
Oxyacetylene
torch
1C
yes
equipme
nt
Parts cleaning
tank and gloves
(non-solvent
based cleaner
suggested)
1C
yes
equipme
nt
Phillips &
standard screw
4C
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
starter
equipme
nt
Phillips
screwdriver set stubby, #1, #2,
6" #1, 6" #2, 12"
#3 and offset #2
4C
yes
equipme
nt
Pin punch, 1/8",
3/16", 1/4" and
5/16"
4C
yes
equipme
nt
Plier set,
combination 6",
hose clamp,
locking jaw,
needle nose 6",
side cutting and
slip joint (water
pump)
4C
yes
equipme
nt
Posidrive
screwdriver set - 4C
#1, #2, #3 and #4
yes
tool
Pump type oil
can
1C
yes
Quantit
y
Require
d?
Categor
y
Item
equipme
nt
Ratchet for 3/8"drive socket
wrench set
4C
yes
equipme
nt
Ratchet for
socket wrench
set
4C
yes
tool
Remote starter
switch
1C
yes
equipme
nt
Rolling-head pry
bar
1C
yes
equipme
Safety glasses
1S
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
nt
(meeting OSHA
requirements)
tool
Screw extractor
set
2C
yes
tool
Seat covers
4C
yes
tool
Soldering gun
1C
yes
tool
Spark plug boot
puller
1C
yes
equipme
nt
Spark plug feeler
gauge (gap tool)
4C
yes
Categor
y
Quantit
y
Require
d?
equipme
nt
Spark plug
sockets, 5/8" &
13/16" for 3/8"
drive socket
wrench
4C
yes
equipme
nt
Speed handle for
3/8" drive socket
wrench
4C
yes
equipme
nt
Standard
screwdriver set stubby, 6", 9",
12", and offset
4C
yes
equipme
nt
Straight pry bar
4C
yes
tool
Tach/dwell meter 1C
yes
tool
Tap and die set standard and
metric
1C
yes
tool
Tape measure
4C
yes
equipme
nt
Taper punch,
3/8", 1/2" and
4C
yes
Item
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
5/8"
tool
Thread repair
insert kit
1C
yes
tool
Tire inflator
chuck
2C
yes
Categor
y
Item
Quantit
y
Require
d?
4C
yes
equipme
nt
Tire pressure
gauge
curriculu
m
Today's Class State Covered
cost
yes
equipme
nt
Torx7 driver set T-8, T-10, T-15,
T-20, T-25, T4C
27, T-30, T-40,
T-50 and T-55
yes
tool
Trouble/work
lights
(fluorescent
preferred)
4C
yes
tool
Tube quick
disconnect tool
set
4C
yes
tool
Tubing bender
1C
yes
tool
Tubing
cutter/flaring set
(double-lap and
ISO)
1C
yes
equipme
nt
Universal joint
for 3/8" drive
socket wrench
4C
yes
tool
V-blocks
1C
yes
tool
Valve core
4C
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
0
Vendo
r
Todaysclass.c
om
Note
s
removing tool
Categor
y
Item
Quantit
y
Require
d?
equipme
nt
Vernier calipers 0-6" and 01C
125mm
yes
tool
Wheel chocks
8C
yes
tool
Wire brush
4C
yes
tool
Work bench with
8C
vises
yes
Estimat
ed Cost
Conta
ct
Whom
?
Contact
Information
Note
s
Category •
•
•
•
•
•
•
•
•
equipment - is a non-expendable, tangible item. It is usually more feasible to repair it
rather than replace it with an entirely new unit. It has a unit cost of over $100.
tool - is an expendable, tangible item. It is usually more feasible to replace it with an
entirely new unit rather than repair it. It has a unit cost of less than $100.
curriculum - is additional curriculum materials.
software - is computer software that is required or can enhance the instruction.
training - is coursework or other professional development for the teacher.
subscription - is for curriculum or supplemental material for a specified period of time.
supplemental - is instructional resources that provide more information about or extend
the content of a subject.
licensure/certification - is examinations, license and certification fees for the students.
other - is additional instructional resources.
Quantity - is the number of items needed for the (C) CTE classroom/lab, for the (B) school
building, for the (L) LEA, or the number needed based on the number of (S) students in the
classroom/lab.
In some cases the number is based on the (W) workstations in the classroom/lab. A classroom
may be divided into several kitchen workstations or hospital bed workstations. In these cases the
number of items is what is needed to equip one workstation. The number of workstations is
based on the anticipated number of students taking that course at one time.
Quantity Examples:
•
1S = one of these items for each student in the classroom/lab
•
•
•
•
•
•
1S, 1C = one of these items for each student in the classroom/lab and an additional one in
the classroom for the teacher
1:4S = one item for every four students in the classroom/lab
1B = one of these items per school building.
1L = one of these items per LEA (school district).
2C = two of these items per CTE classroom/lab.
3W-kitchen = three of these items per kitchen workstation in the classroom/lab.
Required?
•
•
yes = This is required to teach the course.
no = This is not required to teach the course.
Estimated Cost - This is the estimated cost of this item.
Contact Whom? - Should you contact the DPI Consultant or contact the vendor directly?