GKN DESIGN AUTHORITY SPECIFICATION MATRIX
advertisement
GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. GPS-SHOP-0001 PSBO-003185 PSBO-000036 PSBO-000382 PSBO-003385 PSBL-000276 PSSA-000119 PSBO-000383 GPS-FABR-0003 GPS-FABR-0013 PSBL-000275 GPS-FABR-0007 PSBO-000485 PSSA-000578 PSBO-003387 PSSA-000212 PSSA-000041 PSSA-000080 PSSA-000106 PSSA-000307 PSBL-000274 PSBO-000050 PSBO-000029 PSBO-003384 PSBO-003373 PSBL-000273 GPS-CLEN-0010 PSBO-003381 PSBO-001126 PSBO-003282 PSBO-002257 PSBO-003376 PSBO-003377 PSBO-003380 PSBO-003379 PSNG-000470 PSBO-003375 PSBO-000079 PSBO-003374 PSSA-000577 PSNG-000364 PSBO-003303 PSBO-003371 PSBO-003372 PSSA-000576 PSSA-000574 PSSA-000575 PSBO-000042 PSBO-000526 PSNG-000363 PSNG-000091 PSNG-000386 PSNG-000431 PSNG-000469 PSNG-000461 Rev. S D C C A A E B C B A B D A A D B B L C A H G A A A C A F B C A A A A A A G A A B C A A A A A E D D C B B A B Title AREA REQUIREMENTS FOR COMPOSITE FAB & ADHESIVE BONDING D012Z026-01 REV AH, 787 PARTNERS/SUPPLIERS: PROCESS PS12050 REV V - PICKLING MMS5028 REV H - PLASTIC ROTOMOLDING COMPOUND, NYLON PS14032 REV U DEV 1 PREPARATION AND APPLICATION OF PLASTIC F 299-947-104 STRUCTURAL ADHESIVE FILMAND PRIMER SYSTEM,HIGH T SS8798 REV 16, IDENTIFICATION MARKING OF PART METHODS FOR MMS5028 ADDENDUM 1 REV E - APPROVED MMS 5028 MATERIAL SOURCE ROTATIONAL MOLDING OF NYLON FAB, PROCUREMENT AND ACCPT OF CORR RESIST ALUM SAND ASSY MB 2008 CARBON/EPOXY, LAMINATES, FABRI AND ACCEPTANCE OF FOR BOEING PS21237 REV G NEUTRON RADIOGRAPHIC INSPECTION SS5213 REV 6 BOLT - 12 PT EXT WRENCHING,LONG THREAD, INCONEL PS14213 REV M DEV 2 VACUUM FORMING OF F-15 TITANIUM WING SKI SS8612 REV 11, FILM ADHESIVE BONDING SYSTEM, STRUCTURAL COMP SS9581 REV 8 FIBER LAMINATED PRODUCTS, SURFACE FINISH REQUIR SS9170/680 REV 4 EXPENDABLE MANUFACTURING MATERIALS WIPING SS7777 REV 35, SIKORSKY MATERIAL AND PROCESS SPEC INDEX SS9170/660 REV 04, EMM, VACUUM BAG SEALANT CLASS 299-963-001 REV H SPECIMEN, TEST, ADHESIVE BOND CONTROL PS13143 REV W, ALUMINUM, ION VAPOR DEPOSITION (IVD) OF PS12020 REV AB - CLEANING, SOLVENT VAPOR DEGREASING BSS7002 DEP 1-84 REV O STORAGE OF TIME AND TEMPERATURE SENSI D6Z00001 REV AD 787 PROCESSES AND SYSTEMS COMMONALITY MATRIX 299-947-072 REV K FAIRING COMPOUND,AERODYNAMIC, EPOXY AND PO AUTOMATED TITANIUM LINE (BUILDING 1) - OPERATING PLAN AND PR PS19146 REV P DEV 1 FASTENERS, TAPER-LOK; INSTALLATION OF BAC5004-2 REV AF, PERMANENT STRAIGHT SHANK FASTENER INSTALLA BAC5736 REV V APPLICATION OF CHEMICAL AND SOLVENTRESISTANT F BAC5034-4 REV G, TEMPORARY PROTECTION OF PRODUCTIO NMATERIAL BSS7002 DEP 1-87 STORAGE OF TIME ANDTEMPERATURE SENSITIVE (T BAC5008 PSD 6-132 APPLICATION OF LUBRICANTS ST7M197 REV H FERRULE - TUBE, BUTT WELD FLEXIBLE FLUID C BAC5753 PSD 6-166 CLEANING, DESCALING, ANDSURFACE PREPARATIO T-132A ADCN B02 EDDY CURRENT INSPECTION ? GENERAL PS14034 REV AD DEV 2 LAMINATES, REINFORCED PLASTIC, FABRICAT PS14034 REV AD - LAMINATES, REINFORCED PLASTIC, FABRICATION PS14290 REV T DEV 11 COMPOSITE AND BONDING CURE CYCLE PROCED SS8483 - TECH HELP - STH-14-1937 GC100M REV H, CORE MATERIAL, HONEYCOMB, 68A900001_P.ZIP 1MA10322 REV NEW ALUMINUM ALLOY SPECIAL SHAPED SECTION - EXT 1D0344 REV NEW HINGE, EXTRUDED SS9451 REV 2 TACKIFIER FOR FABRICATION OF STRUCTURAL COMPOSI SS9182 REV 6 SERVICE MODEL DESIGNATION, STENCIL OF SS9038 REV 3 STENCIL - NUMERICAL AIRCRAFT MARKING PS12050.6 REV M - PICKLING TITANIUM AND TITANIUM ALLOYS (EXP PS13208 REV W, HARDCOATING OF ALUMINUM ALLOYS GB23K REV AC, BRACKET, ANGLE, CLAMP SUPPORT, GC100F REV W, CORE MATERIAL GP110ADW REV C, INK, MARKING, FOR IN JET PRINTERS NGP111HK REV C, PRIMER, ADHESION PROMOTER, GC100M REV G AMEND 1 CORE MATERIAL, HONEYCOMB, 5056 ALUMINUM GS31AB REV AR AMD2 SHOP PRACTICE,MANDATORY / OPTIONAL Issued Date 4/10/2015 4/9/2015 4/8/2015 4/8/2015 4/7/2015 4/6/2015 4/6/2015 3/31/2015 3/31/2015 3/31/2015 3/27/2015 3/27/2015 3/24/2015 3/24/2015 3/24/2015 3/24/2015 3/24/2015 3/23/2015 3/23/2015 3/23/2015 3/20/2015 3/18/2015 3/17/2015 3/13/2015 3/12/2015 3/11/2015 3/9/2015 3/6/2015 3/5/2015 3/5/2015 3/5/2015 3/5/2015 3/5/2015 3/5/2015 3/2/2015 3/2/2015 2/24/2015 2/23/2015 2/23/2015 2/20/2015 2/17/2015 2/16/2015 2/10/2015 2/10/2015 2/6/2015 2/2/2015 2/2/2015 1/27/2015 1/22/2015 1/22/2015 1/22/2015 1/22/2015 1/22/2015 1/22/2015 1/22/2015 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSNG-000393 D PSSA-000556 A PSBO-002652 C PSBO-000002 J PSBO-003367 A PSBO-000182 H PSBO-000024 L PSBO-003366 A PSSA-000249 C PSBO-000208 C PSSA-000340 C PSSA-000555 A PSSA-000558 A PSSA-000560 A PSSA-000563 A PSSA-000562 A PSSA-000561 A PSSA-000559 A PSSA-000557 A PSSA-000426 C PSBO-003365 A PSBO-003364 A PSBL-000019 B PSBO-003363 A PSBO-003358 A GPS-WELD-0001 I GPS-CORR-0001 E PSBO-003356 A PSBO-000736 C PSBO-003348 A PSBO-003359 A GPS-CLEN-0003 C PSBO-003361 A PSBO-003362 A PSBO-003360 A PSNG-000467 A PSNG-000468 A PSBL-000202 B GPS-ASSY-0003 B PSBL-000268 A PSNG-000171 C PSNG-000246 C PSNG-000251 C PSNG-000174 D PSBL-000269 A PSBL-000270 A PSBL-000271 A PSBL-000272 A PSBO-003357 A PSBO-000178 I PSBO-000189 O PSBO-001930 B PSBO-003355 A PSNG-000049 C PSBO-003353 A Title GS30BF REV AF, SUB LIST, MATERIAL, METALLIC AND NON-METALLIC SS9170/560 REV 3 D02 EXPENDABLE MANUFACTURING MATERIALS (EMM MMS5064 REV C, HIGH STRENGTH CARBON FIBER REINFORCED MCS5900.1 REV AW, CONSUMABLE MATERIAL SPECIFICATION FOR CO PS17004.1 SAFETYING WITH SAFETY CABLE PS17004 REV AC, SAFETYING PRACTICES PS11344 REV AC, SEALING METHODS PS10010 REV A TRAINING AND CERTIFICATION REQUIREMENTS SS9578 REV 17, CLOTH, GLASS, EPOXY RESIN PREIMPREGNATED PS19260 REV K - INSERTS, HELICAL COIL; INSTALLATION OF SS9578 REV 17 DEV 01, CLOTH, GLASS, EPOXY RESIN PREIMPREGNAT SS5211 REV 11 BOLT - 12 PT EXT WRENCHING,LONG THREAD, STEEL1 SS9578 REV 17 D03, CLOTH, GLASS, EPOXY RESIN IMPREGNATED SS9578 REV 17 D05, CLOTH, GLASS, EPOXY RESIN IMPREGNATED SS9642 REV1 D04, 350?F (177?C) CURING EPOXY IMPREGNATED WOVE SS9641 REV1 D02, 350?F (177?C) CURING EPOXY IMPREGNATED UNID SS9578 REV 17 D06, CLOTH, GLASS, EPOXY RESIN PREIMPREGNATED SS9578 REV 17 D04, CLOTH, GLASS, EPOXY RESIN IMPREGNATED SS9578 REV 17 D02, CLOTH, GLASS, EPOXY RESIN IMPREGNATED SS8805 REV 11, INSPECTION PROCESS, MAGNETIC PARTICLE 4M43 REV W BUSHING, SLEEVE - PRESS-FIT, STEEL, BRONZE, BERYL 9M789 REV E COVER ASSEMBLY - SMALL ROUND ACCESS, INTERNAL HE BPS4589 REV A, PROCESSING OF SANDWICH STRUCTURES STF1302 REV E FINISH INSTRUCTION STF1612 REV E FINISH INSTRUCTION GENERAL PRODUCTION ARC FUSION WELDING APPLICATION OF FUEL TANK COATINGS D6-8411 REV C QUALITY ASSURANCE REQUIREMENTS BAC5750 REV N, SOLVENT CLEANING PS14022 REV K FABRICATION OF INSERTS AND PLUGS FORALUMINUM F BAC5750 PSD 9-38 SOLVENT CLEANING CLEANING AND PRIMING OF TITANIUIM DETAIL PARTS FOR ADHESIVE BAC5750 PSD 6-106 SOLVENT CLEANING BAC5750 PSD 9-40 SOLVENT CLEANING BAC5750 PSD 6-105 SOLVENT CLEANING T-103 ESP PENETRANT INSPECTION T-132 ESP EDDY CURRENT INSPECTION - GENERAL 512-947-002 REV A, FINISH SPEC FOR THE RELENTLESS MODEL 525 SHOT PEENING 299-947-496 TOUCH-UP COATING, ONE-PART PHST1002 REV H, ACS/UMS SUPPLIER PKG REQMTS MANUAL PHST1004 REV N, PHS & T MATERIAL HANDLING MANUAL QSM-00034 REV B, SILICON CARBIDE ABRASIVE SHEET R-306 REV D, FABRUCATING AND FORMING TITANIUM PARTS MB1538 REV N FILLER, POLYESTER, BODY AND PINHOLE MB1630 REV F PINHOLE FILLER FOR COMPOSITE MATERIALS MB1615 REV B LACQUER PUTTY FOR PAINT SHOP USE MB1942 REV A FEATHER FILL POLYESTER PRIMER SURFACER PS14288 REV E DEV1 ROTATIONAL MOLDING OF NYLON MATERIALS PS16002 REV AN , MARKING OF IDENTIFICATION AND MODIFICATION PS17169 REV AL, BONDING AND GROUNDING; ELECTRICAL 30M-MS21141 REV A, SUP FOR MS21141 BOEING ST. LOUIS MMS146 ADD 1 REV T APPROVED MMS 146 MATERIAL SOURCES (F/A-18 PS21244 REV E ULTRASONIC RESONANCE INSPECTION OF BONDED ASSY MMS146 REV P ALUMINUM FORGINGS, ALLOY 7050 Issued Date 1/22/2015 1/20/2015 1/13/2015 1/9/2015 1/9/2015 1/9/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 1/8/2015 12/17/2014 12/16/2014 12/12/2014 12/11/2014 12/9/2014 12/9/2014 12/1/2014 11/24/2014 11/14/2014 11/14/2014 11/14/2014 11/14/2014 11/14/2014 11/14/2014 11/14/2014 11/13/2014 11/13/2014 11/6/2014 11/6/2014 11/6/2014 11/5/2014 11/5/2014 11/5/2014 11/5/2014 11/4/2014 11/4/2014 11/4/2014 11/4/2014 11/3/2014 10/29/2014 10/29/2014 10/24/2014 10/24/2014 10/22/2014 10/21/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-003224 B PSBO-003352 A PSBO-002423 C PSBO-003351 A PSBO-003349 A PSNG-000197 B PSNG-000198 B PSNG-000464 A GPS-CORR-0008 A PSNG-000182 B PSNG-000255 C PSNG-000256 C PSSA-000532 B PSSA-000533 B PSNG-000465 A PSNG-000463 A PSNG-000194 C PSNG-000185 B PSBO-002070 C PSBO-000069 K PSBO-003220 C PSBO-000170 P PSNG-000460 A PSPW-000051 C PSNG-000459 A PSNG-000458 A GPS-EREQ-0001 P PSNG-000116 B PSNG-000462 A GPS-CLEN-0005 E GPS-CLEN-0004 D PSNG-000399 B PSBO-003346 A PSBO-003343 A GPS-CORR-0007 B PSBO-003345 A PSBO-003344 A PSBL-000267 A PSBO-003342 A PSBO-000441 C PSSA-000300 B PSBO-002851 B PSBO-000206 L PSBO-000780 H PSBO-002710 D PSBO-000776 E PSBO-001653 C PSBO-003312 C PSBO-003340 A PSBO-003341 A PSBO-003313 C PSBO-002776 D PSBO-001798 C PSBL-000016 C PSBL-000017 C Title DQS4.2-17 REV M GENERAL CONTOUR WAVINESS AND MISMATCH C-17 DSQR APPROVED LIST BDS-207 REV C, INTERFACE DRAWINGS PS14213 REV M DEV 1 VACUUM FORMING OF F-15 TITANIUM WING SKI ST9M468 REV L LATCH ASSEMBLY ? FLUSH, DEEP OFFSET DAA7322H024 REV E CANCELLATION DCN G82947 DAA7326H001 CANCELLATION DCN G82946 GP111EL REV B PRIMER, CORROSION,INHIBITING, ADHESIVE BONDING APPLICATION OF SOL-GEL CONVERSION COATING ON TITANIUM SC-305 REV C GRAIN DIRECTION CONTROL QSM-00077 REV D FLATBACK MASKING TAPE QSM-00109 REV F, MASKING TAPE SS8798 REV 16 DEV 3, IDENTIFICATION MARKING OF PART, METHODS SS8798 REV 15 DEV10, IDENTIFICATION MARKING OF PART, METHODS T-181 ESP MEASUREMENT OF ALPHA CASE OF TITANIUM ALLOYS SDRLDAF3121P041 REV A ADF3 SUBCONTRACTS DATA REQUIREMENTS LI T-181 REV B, MEASMENT OF ALPHA CASE ON TITANIUM ALLOYS SC-320 REV B CONTROL OF TITANIUM CONTAMINATION D950-11059-1 REV D, BDS SELLER SPECIAL TOOLING REQMTS PS13646 REV AJ - PAINTING OF F-15 AIRCRAFT PS21230 REV C WRITTEN PROCEDURE REQUIREMENTS FOR NONDESTRUCT PS16001 REV CB, MARKING OF FABRICATED PARTS ACS-PRS-8002 REV B AREA REQUIREMENTS FOR ADHESIVE BONDING AN PWA36465 REV B FABRIC, EPOXY TACKIFIED, 75/25 DOUBLE CLOTH ACS-PRS-5051 REV D COMPOSITE SANDWICH STRUCTURE FOR 250?F ACS-PRS-5003 REV C CARBON FIBER REINFORCED EPOXYLAMINATES, PYROMETRY REQUIREMENTS FOR THERMAL PROCESSING EQUIPMENT GSS4407 REV G, LACQUER: ACRYLIC, GSS15304 REV G AMD1 INSTALLATION OF HIGH STRENGTH,PULL TYPE, PICKLING ALUMINUM ALLOYS CLEANING, ALKALINE GSS4406 REV C, CLEAR DULL VINYL, LACQUERBAC5771 PSD 6-82 STRIPPING INORGANIC FINISHES BAC5632 PSD 6-62 BORIC ACID ? SULFURIC ACIDANODIZING BORIC ACID - SULFURIC ACID ANODIZING BAC5632 PSD 6-55 BORIC ACID SULFURIC ACID ANODIZING BAC5632 PSD 6-64 BORIC ACID - SULFURIC ACID ANODIZING 299-947-386 CORE MATERIAL,NONMETALLIC HONEYCOMB,PHENOLIC RES 9D0207 PANEL, STRUCTURAL, AIRCRAFT, HONEYCOMB SANDWICH LIGHT PS21211.3 REV J, ULTRASONIC INSPECTION OF FINISH-MACHINED P SS9170/542 REV 1, EMM PRESSURE STRIP INTENSIFIER CLASS PS17202 REV V, ESDS DEVICES AND ASSEMBLIES; PROTECTION OF PS19200 REV AT, FASTENERS, BOLTS AND SCREWS: INSTALLATION PS17150.1 REV AC, EQUIPMENT, TOOLING AND PROCEDURES FOR CRI 3M463THRU3M465 REV BB, NUT ASSEM, SELF-LOCKING, GANG CHANNEL PS17111 REV W, STRIPPING OF ELECTRICAL WIRES 30M-NAS673 THRU NAS678 REV D, NAS673 THRU NAS678 BOEING ST. 74A900053 SERIALIZATION AND TRACEABILITY REQUIREMENTS FOR F/ BSS7225 REV H ADHESION, TAPE TEST BSS7084 REV A PRE-APPROVED STATISTICAL SAMPLINGPLANS 74A900054 CONTROL OF FRACTURE AND MAINTENANCE CRITICAL PARTS 5M2509 REV L, FLOODLIGHT, ELECTRICAL 30M-NAS1291 REV F, BOEING-ST. LOUIS SUPPLEMENT FOR BPS4514 REV C, MACHINING, DRILLING AND TRIMMING FIBER REINF BPS4515 REV F, INSTALL OF FASTENERS IN COMP COMP AND COMP M Issued Date 10/20/2014 10/20/2014 10/17/2014 10/17/2014 10/14/2014 10/10/2014 10/10/2014 10/9/2014 10/9/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 10/8/2014 9/30/2014 9/29/2014 9/29/2014 9/29/2014 9/29/2014 9/29/2014 9/29/2014 9/29/2014 9/24/2014 9/15/2014 9/15/2014 9/15/2014 9/15/2014 9/15/2014 9/11/2014 9/10/2014 9/10/2014 9/10/2014 9/10/2014 9/9/2014 9/4/2014 9/3/2014 9/3/2014 9/3/2014 8/27/2014 8/27/2014 8/27/2014 8/20/2014 8/20/2014 8/20/2014 8/20/2014 8/20/2014 8/20/2014 8/20/2014 8/20/2014 8/18/2014 8/18/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBL-000036 PSBL-000040 PSBL-000098 PSBL-000231 PSBL-000102 PSBL-000084 PSBL-000039 PSBL-000035 PSBO-000017 PSBO-001927 PSBO-003336 PSBO-003339 PSNG-000456 PSSA-000554 GPS-CLEN-0002 PSBO-003338 PSBO-003337 PSBO-000294 PSBO-000326 PSBO-003268 PSBO-000488 PSNG-000454 PSBO-000297 PSBO-000516 PSBO-003334 PSBO-000203 PSBO-002892 PSBO-003333 PSBO-000135 PSBO-003178 PSBO-001461 PSBO-001101 PSBO-001038 PSBO-000471 PSBO-000052 PSBO-000086 PSBO-000427 PSBO-000110 PSBO-001396 PSSA-000117 PSBO-002075 PSBL-000266 GPS-FABR-0008 GPS-FABR-0015 GPS-FABR-0006 PSF22-001563 PSBO-003332 PSBO-000285 PSBO-001529 PSBO-003331 PSBO-003330 PSNG-000455 PSBO-000371 PSBO-003325 PSBO-003327 Rev. G E B B B B C C E C A A A A E A A B D B B C B C A G C A C D B C D E E B D B C G C A B B B A A D B A A A C A A Title 160-014 REV CA, ALTERNATE MATERIAL LIST BELL MATERIAL BULLITNS SUBJECT INDEX REV DK MB1462 REV P, ADHESIVE PRIMER BPS4533 REV C, INSTALLATION OF SHIMS MB1588 REV L, RELEASE AGENTS FOR MOLDS AND FIXTURES MB1247 REV B, INK, METAL MARKING,TEMPORARY,NON-PERMANENT 299-099-031 REV AC, FINISH CODE 160-009 REV P, SHEET METAL MANUFACTURING PRACTICES PS11205.3 REV H - FABRICATION OF FORM-IN-PLACE DOOR SEALS US PS17146.1 REV U, COUPLINGS, FLEXIBLE, FLUID SYSTEM 6D0012 REV H CUTOUT AND MTG PATTERN, FLUSH LATCHES, STANDARD BMS10-103 REV D NONCHROMATED PRIMER FORCOMPOSITES ACS-PRS-2301 REV E MARKING OF FABRICATED PARTS ANDASSEMBLIES SS8888 REV 8 D06 COMPOSITE COMPONENTS, GENERAL PROCESS SPEC CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESIVE BONDING BMS10-11 REV AB QPL REV B CHEMICAL AND SOLVENT RESISTANTFINI BMS10-11 REV AB CHEMICAL AND SOLVENT RESISTANTFINIS PS21241.2 REV F - BUBBLE LEAK TESTING PS22300 REV K - ELECTRON BEAM FUSION WELDING (EXPORT CONTROL PS14999 REV J GKN DEV 3 COBONDING CARBON/EPOXY PREPREGS, ALU PS21241.1 REV F MASS SPECTROMETER LEAK TESTING GS30BF AMEND AE5 SUBSTITUTION LIST, MATERIALS,METALLIC AND N PS21255 REV C - ULTRASONIC INSPECTION OF BONDED MMS 440 MATE PS14008 REV T, FLARING PER MS33583 AMD MS33584; TUBING 74A900057_H PS19145 REV AE, INSTALLATION OF HI-LOK FASTENERS 9M1014 REV H, STRAP, TIE DOWN, METALLIC D6-56199 REV AD HARDWARE AND SOFTWARE COMPATIBILITY REQUIRE PS15500.6 REV D - HEAT TREATING OF ALUMINUM ALLOYS TO THE -T PS14268 REV AA GKN DEV 5, CARBON FIBER REINFORCED TOUGHENED 3M1239 REV C, RING RETAINING 5M3007 REV E, LIGHTED,SWITCH/INDICATOR ASSEMBLY, NIGHT VISIO PS19150 REV AH FASTENERS, LOCKBOLTS, INSTALLATION OF PS21313 REV M, COATING ADHESION TESTS PS13204 REV AJ - CONVERSION COATING, BRUSH AND SPRAY PS14111.1 REV J - DRILLING AND SHIMMING SEQUENCE FOR COMPOSI PS14064 REV J - DUCTS, PRESSURE, BRAIDED, GLASS ROVING OR PS14306 REV H - ADHESIVE BONDING OF METAL FACED SANDWICH PAN 5M2953 REV J, CONNECTOR ACCESSORY, BACKSHELL, 45, STRAIN REL SS8483 REV 8, ANODIC COATINGS FOR ALUMINUM AND ALUM ALLOYS 5M2482 REV F, SWITCH, ROTARY, MINIATURE, 36DEGREES INDEXING, 299-947-128 REV N POLYURETHANE FOAM SYSTEMS(RIGID AND FLEXIB CARBON FIBER BISMALEIMIDE LAMINATES, FABR AND ACCEPT OF ADHESIVE BONDING OF COMPOSITE STRUCTURE LAMINATES, REINFORCED PLASTIC, FABRICATION OF APPENDIX QX REV 7 SUPPLIER QUALITY REQUIREMENTS BAC001PREF PREFACE PS21219 REV D, EDDY CURRENT INSPECTION ST7M190 REV U, SLEEVE - TUBE COUPLING, EXTERNALLY SWAGED PS19424 REV E FASTENERS, RIVNUT; INSTALLATION OF (DOUGLAS AI PS14124 REV P DEV 1 SANDWICH MATERIAL, HONEYCOMB CORE, CARBO GC100F REV V AMEND 1 CORE MATERIAL, HONEYCOMB,5052 ALUMINUM MMS443 ADDENDUM 1 REV K - APPROVED MMS 443 MATERIAL SOURCES BAC5730 PSD 6-103 SHOT PEENING BAC5730 PSD 6-105 SHOT PEENING Issued Date 8/18/2014 8/18/2014 8/18/2014 8/18/2014 8/18/2014 8/18/2014 8/18/2014 8/18/2014 8/13/2014 8/13/2014 8/12/2014 8/12/2014 8/12/2014 8/12/2014 8/12/2014 8/12/2014 8/12/2014 8/6/2014 8/6/2014 8/6/2014 8/6/2014 8/4/2014 7/30/2014 7/30/2014 7/29/2014 7/23/2014 7/23/2014 7/17/2014 7/16/2014 7/16/2014 7/16/2014 7/16/2014 7/16/2014 7/16/2014 7/9/2014 7/9/2014 7/9/2014 7/9/2014 7/9/2014 7/9/2014 7/9/2014 7/8/2014 7/8/2014 7/8/2014 7/8/2014 7/8/2014 7/3/2014 7/2/2014 7/2/2014 7/2/2014 6/30/2014 6/30/2014 6/26/2014 6/26/2014 6/26/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-003329 A PSSA-000549 B PSSA-000540 B PSSA-000205 E PSSA-000088 D PSBO-003328 A PSBO-003326 A PSBO-000293 B PSBO-000754 B PSBO-000440 B PSBO-002733 E GPS-SHOP-0001 E A PSBL-000003 B PSBL-000042 D PSBL-000151 B PSBL-000144 B PSBL-000143 B PSBL-000131 C PSBL-000128 B PSBL-000106 B PSBL-000080 B PSBL-000050 F PSBL-000041 D PSSA-000553 A PSSA-000552 A PSNG-000451 B PSNG-000392 C PSBL-000252 B PSBL-000242 D PSBL-000227 B PSBL-000226 B PSBL-000224 B PSBL-000215 B PSBL-000201 B PSBL-000187 B PSBL-000182 B PSBL-000258 B PSBL-000257 B PSBL-000009 B PSBL-000015 B PSBL-000033 B PSBL-000142 B PSBO-001530 D PSBO-002152 M PSBO-003209 D PSBO-002174 D PSBO-001531 D PSBO-003323 B PSBO-001004 C PSNG-000395 C PSBO-002859 D PSBO-002050 C PSSA-000077 D PSNG-000453 A PSSA-000108 B Title BAC5730 PSD 9-8 SHOT PEENING SS8806 DEV 6 REV 13 INSPECTION, LIQUID PENETRANT SS9612 DEV 1 REV 10 ORGANIC FIBER CLOTH (ARAMID)/EPOXY RESI SS8806 REV 13, INSPECTION, LIQUID PENETRANT SS9612 REV 10 ORGANIC FIBER CLOTH (ARAMID) EPOXY RESIN PREIM BAC5730 PSD 9-4 SHOT PEENING BAC5730 PSD 6-104 SHOT PEENING PS21241 REV D - LEAK TESTING, GENERAL BAC5793 REV V, APPLICATION OF CORROSION RESISTANT FINISH FOR PS21211.2 REV D - ULTRASONIC INSPECTION OF METAL TUBING PS11207 REV V, FUEL CAVITY ANTI-CHAFING CCA ROOM MAINTENANCE PERMIT BPS4339 REV D, HONEYCOMB CORE MATERIAL BELL PROCESS SPECIFICATION SUBJECT INDEX REV DY BPS4102 REV R, PACK AND/OR PRESER OF AIRCRAFT PARTS BPS4019 REV C, RIVETING PROCEDURE FOR UNIVERSAL, ROUND HEAD MB1260 REV U, TAPE, MASKING, FOR PAINT SHOP USE MB1671 REV K, ID AND MARKING FOR COMP MATERIALS MB1409 REV AL, PRIMER, EPOXY, CHEMICAL AND SOLVENT RESISTANT MB1676 REV K, GLOVES, DISPOSABLE MB1195 REV U, CLEANING COMPOUND QPS200 REV 6 BELL HELICOPTER SUPPLIER QUALITY MANAGEMENT SYS BELL PROCESS SPECIFICATION NUMERICAL INDEX REV DV ASQR-01 APP E SUPPLIER PROCESS CERTIFICATIONREQUIREMENTS ASQR-01 APPENDIX D SUPPLIER SUBTIER MANAGEMENT QUALITY REQUI GM4004 REV D AMEND 2 SHIM MATERIAL, CAST PLASTIC, EPOXY RESI GR110RV REV J, RESIN, EPOXY, FASTENER/INSERT POTTING MB1728 REV G CHEMICAL FILM FOR ELEC BONDING & GROUNDING ALUM BPS4050 REV AE MARKING AIRCRAFT PARTS QPS109 REV 6 ANTI-FRICTION BEARINGS PRODUCT QUALITY REQUIRE QPS108 REV 6 BELL DESIGNED ELECTRICAL PRODUCT QUALITY REQUI QPS104 REV 9 CASTING FORGINGS EXTRUSIONS AND DESIGNATED WRO MB1810 REV T, PRIMER, POLYAMIDE EPOXY, TOUCHUP KIT 299-100-837 REV U, TECHNICAL DATA BPS4138 REV F, CHEMICAL CLEANING OF AIRCRAFT MATERIALS QPS300 REV 4 BELL CONTROLLED ITEM PROGRAM 299-099-900 REV CN APPROVED SOURCE LIST MB1745 REV F CARBON FABRIC, DRY-PLAIN WEAVE BPS4437 REV E, FABRICATION OF STRUCTURAL COMPONENTS BPS4512 REV C, 250 TO 290 CURE LAMINATE COMP STRUCTURES 110-229 REV E, FASTENER MB1077 REV G,TAPE, MASKING, FOR ACRYLIC PLASTIC 7M1275 REV C, COUPLING HALF, QUICK DISCONNECT, SELF SEALING 10M10 REV BN, MISC - ELECTRICAL PS14034 REV AC DEVIATION 5 LAMINATES, REINFORCED PLASTIC, FA ST5M1348 REV AD, CONNECTOR, PLUG, ELECTRICAL - COAXIAL, 7M1276 REV C COUPLING HALF, QUICK DISCONNECT, SELF SEALING PS14223 REV V DEV 3, FABRICATION, PROCUREMENT AND ACCEPTANCE 7M513 REV C HOSE ASSEMBLY, NON METALIC-TFE, WITH INTEGRAL FI GS31AB REV AR SHOP PRACTICE 5M3006 REV H, LIGHT ASSEMBLY ST5M1269 REV N, SWITCH TOGGLE, SPDT, 2 AND 3 POSITION,ENVIRO SS9170/140 REV 05, EXPENDABLE MANUFACTURING MATERIALS ACS-PRS-3251 REV J, PROCESS SPECIFICATION FOR FINISHES, ORGA SA5468 REV 1 FSP NOTICE OF INTENDED MANUFACTURING PROCESS Issued Date 6/26/2014 6/26/2014 6/26/2014 6/26/2014 6/26/2014 6/26/2014 6/26/2014 6/25/2014 6/25/2014 6/25/2014 6/25/2014 6/24/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/23/2014 6/20/2014 6/19/2014 6/18/2014 6/18/2014 6/18/2014 6/18/2014 6/18/2014 6/17/2014 6/11/2014 6/11/2014 6/11/2014 6/11/2014 6/9/2014 6/6/2014 6/2/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-000073 J PSBO-000245 D PSBO-002843 C PSBO-001750 C PSBO-000263 B PSBO-002657 C PSBO-000445 H PSBO-000793 B PSBO-002777 E PSNG-000452 A PSBO-003322 A PSSA-000551 A PSBO-000239 I PSBO-000836 F PSBL-000265 A GPS-WELD-0001 B A PSSA-000177 B PSBO-003321 A PSBO-000067 M PSBO-001524 C PSBO-003165 B PSBO-000186 E PSBO-000979 J PSNG-000446 A PSNG-000448 A PSSA-000525 C PSNG-000450 A PSNG-000449 A PSNG-000447 A PSNG-000445 A PSBO-000205 E PSNG-000075 B PSBO-002452 C PSBO-000214 F PSBO-000839 E PSBO-001617 H PSBO-000087 B PSBO-000187 L PSBO-000364 C PSBO-000995 B PSBO-000879 I PSBO-003166 C PSNG-000149 C PSBO-000216 F PSBO-001772 B PSBO-002711 C PSBO-001583 B PSF22-001561 A PSF22-001562 A PSBO-003320 A PSSA-000550 A PSBL-000263 A PSBO-000462 B PSBL-000264 A PSBO-000001 N Title PS14010 REV AG - LINES, FLUID: FABRICATION AND ASSEMBLY OF PS20701.3 REV P - FABRICATION PRACTICES; GENERAL (DOUGLAS CO 5M3015 REV G, LIGHT ASSEMBLY 7M1272 REV C, COUPLING HALF, QUICK DISCONNECT, SELF SEALING, PS21151.2 REV C - TEST METHODS FOR COMPOSITES: INTERLAMINAR 7M1282 REV B, RESTRICTOR, FLUID FLOW- BLANK, UNION, FLARED PS14148 REV Y, FABRICATION AND APPLICATION OF F/A-18 E/F BL PS11217.4 REV T SPRAY APPL OF TANKS AND CAVITIES WITH POLYSU PS17145 REV U, CONNECTORS, FLUID SYSTEM, PERMASWAGE GS30BF AMEND AE1 ADHESIVE / LIQUID SHIM BAC5793 PSD 6-105 APP OF CORROSIONRESISTANT FINISH FOR INTEG SS9642 REV 1 DEV 3 350 ?F (177?C) CURING EPOXY IMPREGNATED W PS20700.1 REV AR, ASSEMBLY SHOP PRACTICE (DOUGLAS COMMERCIA 6M130 REV BC, CIRCLE NUMBERS- WIRE AND CABLE, ELECTRICAL BPS4555 VARIATION REQUEST - 80-ABF-DSS-14-206 WELDING INSPECTION WHITE LIGHT INTENSITY LOG SS9452 REV 2, RESIN SYSTEMS FOR FABRICATION OF STRUC COMPOSI STF1607 REV E FINISH INTRUCTION PS13630.1 REV AF , PAINTING AT DETAIL AND ASSEMBLY LEVEL PS16014.1 REV C, MARKING OF ITEMS WITH A 2D DATA MATRIX CODE PS16014 REV C, MARKING OF ITEMS WITH A 2D DATA MATRIX CODE PS17035 REV AB- BUSHINGS, INSTALLATION OF; FORCE MATE METHOD PS13662 REV AE, PAINT MOLDLINE F/A-18 E/F & EA-18G AIRCRAF K-138 ESP REV A CLEANING BEFORE INSPECTION K-106B ESP REV A CLEANING TITANIUM PARTS BEFORE THERMAL PROC SS8766 REV 10, SHOT PEENING OF TITANIUM ALLOYS K-132 ESP REV A, CLEANING AFTER INSPECTION K-107 ESP REV A, DESCALING TITANIUM K-142B ESP SOLVENT CLEANING ACS-PRS-4501 REV D BEARINGS AND BUSHINGS,INSTALLATION OF PS19180 REV P, COLD WORKING HOLES; SPLIT SLEEVE METHOD SQAR-REV 10 21 13, SUPPLIER QUALITY ASSURANCE REQUIREMENTS PS14240.3 REV K, CARBON/EPOXY, HIGH STRENGTH, THICK MONOLITH PS19427 REV AE, FASTENERS, HI-LOK AND MD PINS; INSTALLATION 9M927 REV E MOUNT, RESILIENT-VIBRATION, HEAVY DUTY, SQUARE P PS23038 REV T, AUTHORITY FOR MATERIAL SUSTITUTION PS14111.2 REV E - TRIMMING COMPOSITE PARTS WITH THE PASER AB PS17100 REV AW, WIRING, ELECTRICAL, AIRCRAFT, FABRICATION A MMS350 REV L - STRUCTURAL ADHESIVE SYSTEM, INTERMEDIATE MODU ST3M475 REV M RETAINER- FLOATING BARREL NUT, CRES PS17115.2 REV AE, WIRING, ELECTRICAL, BRAIDED, APP OF PS20028 REV H, TRIMMING OF METALLIC DETAIL PARTS FOR ASSEM AML4004 REV 23, APPROVED MATERIALS LIST PS20001 REV AA, PROTECTION OF PARTS DURING FABRICATION AND T PS17130 REV AF, ASSEMBLY OF AN OR SIMULAR TYPE CONNECTORS 3M975 REV P, RECEPTACLE, QUICK-RELEASE PIN 7M514 REV E, COUPLING HALF, QUICK DISCONNECT-NIPPLE, SELF-SE 5PTMKT03-B MATERIAL SPECIFICATIONMOLDABLE PLASTIC SHIM 5PTPJT01-G FINISH REQUIREMENTS, F-22 AIRCRAFT AND SUPPORT EQ MMS423 ADD 1 REV K, APPROVED MATERIAL SOURCE SS8813 REV 3D07 NONDESTRUCTIVE INSPECTION PLAN MB1064 REV D METHYL-ETHYL-KETONE BSS7043 REV B RADIOLOGIC INSPECTION, STORAGE PHOSPHOR PLATE BPS4451 VARIATION REQUEST 80-ABF-DSS-14-123 MCS5900 REV AD, CONSUMABLE MATERIAL SPECIFICATION FOR COMPO Issued Date 5/28/2014 5/28/2014 5/28/2014 5/28/2014 5/28/2014 5/21/2014 5/16/2014 5/14/2014 5/14/2014 5/13/2014 5/12/2014 5/12/2014 5/7/2014 5/7/2014 5/6/2014 5/6/2014 5/6/2014 5/5/2014 5/2/2014 4/30/2014 4/30/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/28/2014 4/25/2014 4/21/2014 4/18/2014 4/16/2014 4/16/2014 4/16/2014 4/9/2014 4/9/2014 4/9/2014 4/9/2014 4/9/2014 4/9/2014 4/4/2014 4/2/2014 4/2/2014 4/2/2014 4/2/2014 4/1/2014 4/1/2014 3/28/2014 3/28/2014 3/26/2014 3/26/2014 3/26/2014 3/26/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBL-000262 PSBO-000772 PSNG-000170 PSSA-000104 PSNG-000165 PSNG-000177 PSNG-000444 PSNG-000257 PSNG-000252 PSNG-000250 PSNG-000249 PSNG-000248 PSBL-000001 PSBO-001505 PSNG-000178 PSNG-000181 PSNG-000161 PSNG-000267 PSNG-000233 PSNG-000243 PSNG-000229 PSNG-000195 PSNG-000221 PSNG-000226 PSNG-000169 PSBO-000015 PSBO-003307 PSPW-000019 PSPW-000026 PSPW-000058 PSPW-000054 PSPW-000049 PSBO-003304 PSPW-000066 PSSA-000201 PSPW-000067 PSBO-002655 PSSA-000548 PSBO-000794 PSSA-000039 PSSA-000012 PSSA-000207 PSSA-000301 PSSA-000306 PSSA-000463 PSSA-000475 PSSA-000547 PSSA-000546 PSSA-000545 PSSA-000507 PSSA-000465 PSSA-000387 PSSA-000304 PSSA-000296 PSSA-000173 Rev. A H B D B B A B B B B B C C B B B B B B B B C B B L A B C B B C A B D A D A D C F C B B B B A A A B B B B B B Title SQRM-001, SUPPLIER QUALITY REQUIREMENTS MANUAL PS11217.6 REV H, F/A-18 E/F OUTER MOLDLINE SEALING SC-304 REV B, FORGING GRAIN FLOW ASQR-01 REV 9, SUPPLIER QA SYSTEM REQUIREMENTS J-309 REV C, ELECTRON BEAM FUSION WELDING RAA3700E006 REV D, PROTECTIVE FINISH RQMTS FOR AIRCRAFT SC-109 REV C SEQ D05 REQUIREMENTS, SPRAY PAINTING FACILITIES QSM-00490 REV A, LONG-MASK MASKING TAPE QSM-00052 REV A, ISOPROPYL ALCOHOL QSM-00004 REV A, ABRASIVE PADS QSM-00002 REV C, WIPER MATERIAL QSM-00001 REV C, CLEANING SOLVENT QPS100 REV 20, BELL DESIGNED PRODUCT QUALITY REQUIREMENTS ST3M744 REV Y, BOLT -CLOSE TOLERANCE, SPLINE DRIVE, CRES (12 SC-306 REV B, MACHINED PARTS- SPECIAL CONTROLS SC-302 REV B, QUALITY ASSURANCE CRIT FOR FORMED METAL PARTS D107 REV C MARKING TITANIUM ALLOYS SC-110 REV B, RQMTS FOR SPRAY PAINTING EQMT K-142 REV B, SOLVENT CLEANING MS-519 REV F, IMPACT RESISTANT EPOXY/WOVEN S-GLASS K-135 REV G, STRIPPING ORGANIC COATINGS D102 REV D, IDENTIFICATION BY INK OR PAINT MARKING K-130 REV C, ABRASIVE CLEANING K-132 REV B, CLEANING AFTER INSPECTION MS-344 REV D, TITANIUM, TI-6A1-4V SHAPES PS11205 REV BA, SEAL, DOOR, FORM-IN-PLACE, FABRICATION OF 74A900004_M.ZIP PWA36459 REV F CARBON FIBER OR FIBERGLASS EPOXY SHEET MOLD PWA36477 REV B- FABRIC, WOVEN CARBON FIBER IM-7 FOUR HARNE PWA36468 REV B, ADHESIVE FILM, EPOXY, SCRIM SUPPORTED PWA36460 REV D FABRIC WOVEN CARBON FIBER PWA300 REV BK CONTROL OF MATERIALS, PROCESSES AND PARTS 74A900000_G.ZIP PWA36475 REV B RESIN, BISMALEIMIDE - RTM PROCESSABLE SS8601 REV 5, FILM ADHESIVE BONDING SYSTEM PWA79465 FABRIC, WOVEN CARBON FIBER, 5HS, EPOXY TACKIFIED DPS3.02-17 REV P ID OF PARTS AND ASSEMBLIES-MILITARY SS9152-PP0902 REV 1 MEASUREMENT OFRESIN CONTENT(BURN-OFF MET PS19406 REV N, RADOMES, FILAMENT WOUND FIBERGLASS AND LAM SS9226 REV 4, ADHESIVE BONDING, TEST PANELS SS9122 REV 18, SHELF-LIFE, OUT-TIME AND STORAGE CONDITIONS SS8603 REV 4, APP OF ADHESIVE PRIMER SS9170/543 REV 02, EMM TOOLING TAPE, PRESSURE SENSITIVE ADHE SS9170/622 REV 03, EMM, TAPES, PRESSURE SENSITIVE CLASS SS8520 REV 4, COATINGS AND FINISHES, ORGANIC AND INORGANIC, SS9226 REV 4 DEV 5, ADHESIVE BONDING, TEST PANELS SS8483 DEV 5 REV 8 ANODIC COATINGS FOR ALUMINUM AND ALUMINUM SS8013 DEV 01 REV 9 HEAT TREATMENT OF ALUMINUM ALLOYS, 7075SS9170-504 AMD 1-01 REV 1 EXPANDABLE MANUFACTURING MATERIALS SS8452 REV 2 TITANIUM ALLOY 6A1-4V FORGINGS, BETA SOLUTION SS8788 REV 1 PAINT STRIPPING OF AIRCRAFT SS9170/560 REV 03, EMM BLENDED SOLVENTS, MANUAL CLEANING SS9170/621 REV 02, EMM TAPE, ADHESIVE FLASHBREAKER CLASS SS9170/520 REV 06, EMM RELEASE FILM CLASS (1) SS9702 REV 4 STEEL, 4340 DEVM FORGED PARTS Issued Date 3/25/2014 3/20/2014 3/17/2014 3/17/2014 3/14/2014 3/14/2014 3/14/2014 3/14/2014 3/14/2014 3/14/2014 3/14/2014 3/14/2014 3/12/2014 3/12/2014 3/11/2014 3/11/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/10/2014 3/5/2014 3/5/2014 3/4/2014 3/4/2014 3/4/2014 3/4/2014 3/4/2014 3/3/2014 2/28/2014 2/28/2014 2/28/2014 2/27/2014 2/27/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 2/26/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSSA-000145 C GMS-WELD-0001F PSSA-000148 B PSSA-000237 C PSSA-000544 A PSSA-000543 A PSSA-000542 A PSSA-000391 B PSSA-000332 B PSSA-000324 C PSSA-000322 D PSSA-000267 D PSSA-000188 B PSSA-000161 B PSSA-000150 B PSSA-000149 B PSBL-000032 C PSBO-000373 F PSPW-000060 A PSPW-000062 A PSPW-000064 A PSPW-000065 A PSPW-000063 A PSPW-000061 A PSBO-000438 C PSBO-002605 B PSSA-000209 B PSBL-000012 B PSBL-000020 B PSBL-000261 A PSBL-000260 A PSBL-000259 A PSBL-000243 B PSBL-000207 B PSBL-000051 B PSBL-000034 B PSBL-000031 B PSSA-000063 C PSBL-000029 B PSBL-000027 C PSBO-000760 C PSBO-003293 A PSBO-003294 A PSBO-001369 C PSBO-003292 A PSBO-001756 E PSBO-000635 D PSBO-001781 D PSBO-002229 B PSBO-002362 D PSBO-002360 B PSBO-002293 C PSBO-002280 H PSBO-002273 C PSBO-002271 C Title SS8013 REV 9, ALLUMINUM ALLOY 7075-T73 HEAT TREATMENT OF CONSUMABLE MATERIALS FOR WELDING PROCESSES SS8015 REV 12 CARBURIZING AND HEAT TREATING OF CASE HARDENIN SS8802 REV 9, CASTINGS, CLASSIFICATION AND RADIO SS8540 DEV 01 REV 2, PRESERVATION OF BARE LOW ALLOY STEELS, SS8612 DEV 1 REV 10 FILM ADHESIVE BONDING SYSTEM, STRUCTURAL SS9642 DEV 2 REV 1 350 ?F (177?C) CURING EPOXY IMPREGNATED SS9048 REV 10, PLATES, PHOTOGRAPHIC SS9642 REV 1, 350F CURING EPOXY IMPREGNATED WOVEN GRAPHITE SS9587 REV 08 DEV 01, SYNTACTIC FOAM FILLER MATERIALS SS9587 REV 08, SYNTACTIC FOAM FILLER MATERIALS SS8521 REV 4, ORGANIC FINISHES, GENER SPEC SS8015 REV 12 DEV 3, CARBURIZING AND HEAT TREATING SS8540 REV 2 PRESERVATION OF BARE LOW ALLOY STEELS. BARE CAR SS8015 REV 12 DEV 2 CARBURIZING AND HEAT TREATING OF CASE HA SS8015 REV 12 DEV 1 CARBURIZING AND HEAT TREATING OF CASE HA 110-225 REV G, FASTENER, BLIND, 130? SHEAR HEAD, HIGHSTRENGT MMS5005 ADDENDUM 1 REV N, APPROVED MMS 5005 MATERIAL SOURCE MCL MANUAL SECTION A-3 MATERIAL CONTROL LABORATORY MANUAL APPENDIX 56 MATERIAL CONTROL LABORATORY MANUAL SECTION F-17 SUPP A MATERIAL CONTROL LABORATORY MANUAL SECTION F-23 MATERIAL CONTROL LABORATORY MANUAL SECTION F-17 MATERIAL CONTROL LABORATORY MANUAL APPENDIX 36 PS21206.2 REV D - RADIOGRAPHIC INSPECTION OF ELECTRONIC COMP BAC5875 REV N, FABRICATION OF ALUMINUM FOR MARKERS SS8611 REV 6, ADHESIVE BONDING, SYSTEM G BPS4458 REV F, STRUCTURAL ADHESIVE BONDING 299-947-333 REV U, NDT ACCEPT CRITERIA FOR LAMINATE AND SAND 100-229 REV NEW, PLATE-IDENTIFICATION,ELECTRICAL REPAIR SET 299-947-494 REV B MAR-RESISTANT ROTOR BLADE TOPCOATING 299-947-345 REV G TAPE, UNIDIRECTIONAL, 350?F-CURE, EPOXYRES BPS4182 REVISION G - CHEMICAL FILM TREATMENT 299-947-739 REV N, DRAWING INTERPRETATION AND GENERAL RQMTS BPS4162 REV H, INSTALL AND RETENTION OF BEARINGS THROUGH ST 160-006 REV AY, ALTERNATE MATERIALS LIST 110-223 REV L, FASTENER SS8669 REV 21 ADHESIVE BONDING 100-158 REV P, PIN, 130 FLUSH CROWN SHEAR HEAD 299-947-320 REV L, ADHESIVE FILM AND PRIMER SYSTEM BSS7219 REV D, INTERGRANULAR ATTACK, TEST METHOD BAC5772 REV W CHEMICAL MILLING ALUMINUM BACALLOYS BSS7348 REV A RATE TESTING PROCEDURE FOR CHEMICALREMOVAL OF DPS3.177 REV M SOLID FILM LUBRICANTS BAC5000 PSD6-239 SEALING, GENERAL DPM INDEX FEBRUARY 1 2014 BACD2097 REV W SURFACE TEXTURE (U.S. CUSTOMARY AND METRIC) 9M712 REV H, JOINT - UNIVERSAL, PLAIN, SPECIAL BDS-602 REV B, MODEL BASED DEFINITION-DATA SET REVISIONS BACG20AK REV N, GROMMET, BLANKET, TUBULAR BACL10AJ REV H, LATCH, FLUSH TYPE, HEAVY DUTY BMS4-6 REV L QPL REV H, BOEING MS D33142-14B REV DK, OPTICAL ALIGNMENT TARGETS BACG27D REV C, GUIDE, MOP SILL BACB30NN REV AV, BOLT, 100 DEG HEAD, CROSS RECESS Issued Date 2/26/2014 2/24/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/21/2014 2/20/2014 2/20/2014 2/20/2014 2/20/2014 2/20/2014 2/20/2014 2/20/2014 2/20/2014 2/19/2014 2/19/2014 2/19/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/18/2014 2/14/2014 2/14/2014 2/14/2014 2/12/2014 2/12/2014 2/12/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-002235 B PSBO-002234 B PSBO-002233 D PSBO-002491 E PSBO-002489 B PSBO-002474 B PSBO-002460 E PSBO-002456 F PSBO-002415 B PSBO-002412 B PSBO-002411 B PSBO-002363 D PSBO-002587 B PSBO-002585 F PSBO-002584 B PSBO-002565 B PSBO-002555 B PSBO-002539 F PSBO-002538 B PSBO-002527 B PSBO-002505 C PSBO-003159 B PSBO-003152 B PSBO-003151 B PSBO-003148 C PSBO-002890 B PSBO-002746 B PSBO-002662 B PSBO-002601 C PSBO-002600 C PSBO-002588 E PSBO-002199 B PSBO-001690 B PSBO-003290 A PSBO-003251 B PSBO-000082 D PSBO-000751 C PSBO-002074 B PSBO-001228 C PSNG-000442 B GPS-SHOP-0001 D A PSBO-000539 D PSBO-000693 C PSBO-002576 B PSBO-002575 B PSBO-002546 B PSBO-002500 B PSBO-002435 B PSBO-002298 B PSBO-002266 B PSBO-002264 C PSBO-002263 B PSBO-002621 F PSBO-002612 B PSBO-002260 B Title BMS5-142 REV G, QPL REV A BMS5-142 REV G, LOW DENSITY SEALANT BMS5-45 REV G QPL REV A BACT44G REV M, TRACK, MOUNTING, FOR CONNECTOR, ELECTRICAL BMS3-32 REV C, LANDING GEAR SHOCK STRUT FLUID, ANTI-WEAR BACB30ZF REV M, BOLT, 12 POINT HEAD, PD SHANK, NICKEL ALLOY BMS5-157 REV K QPL REV B BPS-F-69SUP REV BJ, FASTENERS, EXTERNALLY THREADED D32061-00 REV W, BOEING TEMPLATE DOCUMENT BACB30NM REV BB, BOLT, HEX HEAD, 160 KSI MIN TENSILE BACN11BT REV A, NUT, SELF-LOCKING, HEXAGON, SELF-SEALING BACG20AJ REV N, GROMET, BLANKET, RECTANGULAR BSS7082 REV A, PPV, PROCEDURES AND REQUIREMENTS BMS10-83 REV L QPL ORG BMS10-83 REV L, INTERIOR DECORATIVE URETHANE PAINT SYSTEM BMS10-107 QPL REV F BACS12JE REV E, SCREW, 100 DEG HEAD, TORX PLUS RECESS BACC66K REV AJ, CONNECTOR, ELECTRICAL, RECTANGULAR, PLUG, SI BACI10AL REV AA, INSERT ARRGMT, CONNECTOR, ELECTRICAL, GENER BMS5-162 ORG, QPL A BACF3U REV K, FILLER, FLAT, RECTANGULAR, GLASS FIBER AND CAR BMS8-139 REV N QPL REV A BMS8-331 REV H QPL REV ORG BMS8-331 REV H, ADVANCED COMPS BMS8-276 REV V QPL REV A 5M3150 REV C, SWITCH- PUSH BUTTON 5M2997 REV D, TERMINAL, STUD, BLIND, FOR ELECTRICAL BONDING 5M3190 REV A, SWITCH, SENSITIVE, PLUNGER, 7 AMPERES BACB31T REV K, BOLT, HEX DRIVE, SLEEVED, PROTRUDING HEAD BACS38A REV AC, STRAP ASSEMBLY, WEBBING D33142-0 REV DK, BOEING OPTICAL TOOLS CATALOG D31181-0 REV P, BOEING ADVANCED COMPOSITES TOOL DESIGN DOCUM 30M-NAS1474 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR PS19151 REV L FASTENERS, EDDIE BOLT 2; INSTALLATION OF BAC5845 REV P, APPLICATION OF POLYURETHANETOPCOAT PS14080 REV N, APPLICATION OF MARKINGS TO PANELS BAC5763 REV L, EMULSION CLEANING AND AQUEOUS DEGREASING PS23041 REV V DEV 2-GKN, MACHINED PARTS, REQUIRE AND ACCEPT BAC5710 REV R APPLICATION OF SPECIAL PURPOSE COATINGS GS31AB REV AP AMEND 3, SHOP PRACTICE CONSUMABLE MATERIAL CP 11-22-13 BAC5430 REV M FABRICATION AND INSTALLATION OF RESIN BONDED L BAC5338 REV D, ACID ETCH AND ELECTROCHEMICAL ETCH MARKING BAC5667 REV A, APP OF SOL-GEL COATINGS BAC5308 REV E, APP OF STENCIL ADN INSIGNIA MARKINGS BAC5312 REV L, APP OF PLASTIC FILM MARKERS BAC5527 REV M, APP OF SECONDARY FUEL BARRIER BAC5117-6 REV H, ELECTRICAL FAYING SURFACE BONDS BAC5506 REV F, INSTALL OF ELASTOMERIC SEALS BAC5360 REV B, REQUIREMENTS TO LIMIT UV DEGRADATION OF COMP BAC5090, QPL REV B BAC5090 REV A, COMPRESSION MOLDING OF REINFORCED THERMOPL BAC5355D QPL REV H BAC5666, QPL REV E BAC5063-3 REV B, BLIND FASTENER INSTALLATION IN COMP STRUCTU Issued Date 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/11/2014 2/7/2014 2/7/2014 2/7/2014 2/6/2014 2/6/2014 2/6/2014 2/6/2014 2/3/2014 2/3/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 1/31/2014 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002023 PSBO-000193 PSBO-003088 PSBO-002444 PSBO-002468 PSBO-000533 PSBO-001257 PSBO-000023 PSBO-001718 PSBO-001859 PSF22-000155 PSBO-002761 PSSA-000264 PSNG-000394 PSBO-000183 PSBO-000442 PSBO-000527 PSBO-001858 GPS-FABR-0002 PSNG-000125 PSBO-000141 PSBO-000353 PSNG-000356 PSBO-003289 PSBO-002517 PSBO-002372 PSBO-000354 PSBO-000180 PSBO-002249 PSBO-003280 PSBO-003279 PSBO-003281 PSBO-003288 PSBO-003287 PSBO-003286 PSBO-003285 PSBO-003284 PSBO-003283 PSBO-000003 PSBO-001413 PSBO-003278 PSNG-000044 PSBO-000281 PSBO-003183 PSBO-001419 PSBO-000872 PSNG-000387 PSBO-000536 PSBO-001121 PSBO-003277 PSBO-000192 PSBO-002857 PSBO-000697 PSBO-000213 PSBO-002850 Rev. C B B C B C C C C C C B E E G C B C C B F E C A C C B G D A A A A A A A A A G B A B D B B C C E D A F E B G B Title BAC5300-1 REV G, SURFACE AND EDGE INTEGRITY OF METAL PARTS PS19003 REV D - FASTENERS, CAPTIVE PANEL, INSTALLATION PS14240 REV R DEV 5, CARBON EPOXY, LAMINATES, FABR AND ACCEP BAC5001-10 REV F, TUBE ASSEMBLIES, INSTALLATION AND CLAMPING BAC5008 REV U, APP OF LUBRICANTS BAC5063 REV N FASTNER INSTALLATION IN COMPOSITE STRUCTURES BAC5001 REV M, FLUID LINES, FITTINGS AND PRESSURE TESTING PS11339 REV G - ADHESIVE TAPE - PRESSURE SENSITIVE (DPS 1.09 ST3M446 REV V, CLIP - NUT RETAINING, GANG CHANNEL AND PLATE 3M1170 REV U, BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS 5PTC1007 REV AA LABEL, AIRFRAME ITEM 1 D BAR CODE, 2D UID DA PS14450 REV A, ATMOSPHERIC PRESSURE CURING TOUGHENED EPOXY SS8555 REV 15, AIRCRAFT PAINT REQUIREMENTS GS30BF REV AD7, SUB LIST, MATERIALS, METALLIC AND NONPS17031 REV W, BEARINGS/BUSHINGS, GROOVED OUTER RACE, STAKI PS21211.5 REV D, ULTRASONIC INSPECTION OF METALLIC, BONDED, PS13222 REV J COATING, CHEMICAL CONVERSION OF ALUMINUM ALLOY 3M1169 REV U, BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESSFIBER PLACEMENT OF CARBON/EPOXY LAMINATES GSS20350 REV D AMD 4, STRUCTURAL ADHESIVE BONDING PS15701 REV P - GENERAL HEAT TREATING CRITERIA FOR ALUMINUM MCS6000 REV M, CONSUMABLE MATERIAL SPECIFICATION FOR HAND A AML4355 REV 14, APPROVED MATERIALS LIST PS21220 REV C, EDDY CURRENT INSPECTION OF METAL TUBING MMS545 REV M ADD 1, APPROVED MMS 545 MATERIAL SOURCES PS23001 REV V, ACCEPTANCE PROCEDURE FOR AIRFRAME CASTINGS MCS6000.1 REV A - CONSUMABLE MATERIAL SPECIFICATION FOR HAND PS16011 REV V - MARKING METHODS AND MATERIALS (DPS 3.27, -1, BSS7002 REV AC, STORAGE OF TIME AND TEMP SENSITIVE MATERIALS BAC5703 REV K CRITERIA FOR LIMITED CONTAMINATION AREAS BAC5022 REV H SULFURIC ACID ANODIC FILMS BAC5730-1 REV D SHOT PEEN FORMING BSS7626 REV B APPLICATION OF CORROSION RESISTANTFUEL TANK CO BSS7343 REV E NONDESTRUCTIVELY DETERMININGPRESENCE OF NON-VI BSS7286 REV B STATISTICAL PROCESS CONTROL OFDESIGNATED ENGIN BSS7023 REV AA MANUFACTURING FACILITIES WITHAPPROVED OPERATI BAC5951 REV D GLASS BEAD PEENING BAC5765 REV V CLEANING AND DEOXIDIZING ALUMINUMALLOYS PS11001 REV AE, CEMENTING OF RUBBER, PLASTICS, FABRICS, AND PS17600 REV N BUSHINGS AND BEARINGS; INSTALLATION AND STAKIN PS20018 REV F, SURFACE FINISH REQUIREMENTS FOR ROUND HOLES PS20509 REV U AREA REQ FOR ADHESIVE BONDING/COMPOST FAB PS21206.6 REV F - COMPUTED RADIOGRAPHIC INSPECTION PS14004 REV R, INSULATION OF AIR DUCTS ST5M1414 REV AG, CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHEL PS21244 REV E, ULTRASONIC RESONANCE INSP OF BONDED ASSY GP110AEF REV AE, PAINT, COATING, POLYURETHANE, HIGH SOLIDS, BAC5307 REV U PART MARKING BAC5000 REV AL SEALING, GENERAL BAC5665 PSD 6-4 APPLICATION OF SOL-GELCONVERSION COATINGS ON PS19000 REV AA, INSTALLATION OF FASTENERS MMS833 REV L, YARN; BRAIDING, ELECTRICAL HARNESS JACKET BAC5665 REV A APPLICATION OF SOL-GEL CONVERSION COATINGS ON PS19420 REV T - FASTENERS, SOLID RIVETS; INSTALLATION OF (BO ST7M217 REV J, TEE Issued Date 1/31/2014 1/30/2014 1/30/2014 1/30/2014 1/30/2014 1/30/2014 1/30/2014 1/29/2014 1/29/2014 1/29/2014 1/27/2014 1/22/2014 1/21/2014 1/17/2014 1/16/2014 1/16/2014 1/16/2014 1/16/2014 1/14/2014 1/8/2014 1/3/2014 1/3/2014 1/3/2014 1/3/2014 1/3/2014 1/3/2014 1/3/2014 1/3/2014 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/19/2013 12/18/2013 12/18/2013 12/16/2013 12/13/2013 12/11/2013 12/11/2013 12/11/2013 12/11/2013 12/9/2013 12/6/2013 12/5/2013 12/5/2013 12/4/2013 12/4/2013 12/2/2013 11/27/2013 11/27/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000284 PSBO-002221 PSGS-000029 PSSA-000539 PSGS-000037 PSSA-000265 PSBO-003276 PSNG-000443 PSBO-000329 PSBL-000021 PSBO-000781 PSBO-003275 PSSA-000428 PSNG-000168 PSBO-001286 PSBO-002349 PSNG-000084 PSNG-000441 PSSA-000277 PSSA-000503 PSBO-003271 PSBO-003272 PSBO-003273 PSBO-003274 PSBO-000463 PSBO-001289 PSBO-002029 PSBO-002237 PSBO-002252 PSBO-002288 PSBO-002581 PSBO-002580 PSBO-002487 PSBO-002408 PSBO-002407 PSBO-002356 PSBO-002355 PSBO-002344 PSBO-002289 PSBO-002644 PSBO-002643 PSBO-002599 PSBO-002597 PSBO-002583 PSBO-002276 PSBO-002243 PSBO-002196 PSBO-001347 PSBO-000866 PSBO-000464 PSBO-000544 PSBO-000905 PSBO-002929 PSBO-002867 PSBO-002824 Rev. F F B A B E A A C B E A C B E B D A C B A A A A C C B C C B B B B B B C C C B B B B B B B B B D D D C C B B B Title PS21211.4 REV W - ULTRASONIC INSPECTION OF COMPOSITE LAMINAT BAC5348G QPL REV E GAMPS 3102 REV J, INTEGRAL FUEL TANK COATING SS8813 REV 03 DEV 06, NONDESTRUCTIVE INSPECTION PLAN GAMPS 3216 REV B, EPOXY TOPCOAT, HI SOLIDS, PHOSP ESTER FLUI SS8630 REV 25, SEALING AND INSULATION OF MATING SURFACES DPS 11.01 REV AR CHROMIC ACID ANODIZING ALUMINUM MIL-DTL-5541F CHEMICAL CONVERSION COATINGSON ALUMINUM AND AL PS23401 REV P - CERTIFICATION OF FURNACES AND TEMPERATURE CO 299-947-346 REV J, FABRIC, WOVEN, 350 CURE PS17179 REV AA FABRICATION AND INSTALLATION OF ELECTRICAL WI 6M229 REV A KNOT FIBER REINFORCED PLASTIC DETAILS 06000-777-001 REV 7, MFG INSPECT AND ACCEPT CRIT FOR CH53K MS-342 REV E, TITANIUM 6AI-4V, ELI, RA FORGINGS BACD2074 REV AS FASTNER CODES AND SYMBOLS BSS7063 REV C, GEN REQUIREMENTS FOR CERT OF ELECTRICAL TERM PS19200 REV AP, FASTERNERS, BOLTS, AND SCREW: INSTALLATION GM4355 REV B AMD 1 ADHESIVE, STRUCTURAL HEAT-RESISTANT (350? SS7007 REV 20, GROUNDING AND BONDING ELECTRICAL, PROCEDURE F SS8707 REV 3, GRINDING OF TITANIUM PARTS BMS7-323 REV E HIGH STRENGTH FATIGUE TOLERANT,STRESS CORROSI BMS7-323 REV E QPL REV A, BOEING MATERIAL SPECIFICATIONQUALI BMS7-381 REV C, HIGH STRENGTH, DAMAGE TOLERANT,CORROSION RES BMS7-381 REV C QPL REV ORG, BOEING MATERIAL SPECIFICATIONQU BSS7600 REV V - PERSONNEL CERTIFICATION, GENERAL REQUIREMENT BACS40R REV AL SHIM, LAMINATED, ALUMINUM ALLOY, CRES TITANIU BMS7-360 REV H QPL REV C BOEING MATERIAL SPECIFICATIONQUALIF BMS7-247 H, QPL REV D BOEING MATERIAL SPECIFICATIONQUALIFIED BPS-P-170 REV C, PROCESS CONTROL REQUIREMENTS FOR FASTENERS BMS8-246 REV K, COATED, TRANSPARENT POLYCARBONATE MATERIALS BMS7-374 REV B QPL REV ORG BMS7-374 REV B, SURFACE TREATED METAL FOIL BSS7617 REV R, ELECTRICAL BONDING AND GROUNDING, EMPLOYEE CE BMS8-321 H, QPL REV A BMS8-321 REV H, POLYETHERIMIDE BASED THERMOPLASTIC INJECTION BMS7-394 REV B ORG QPL BMS7-394 REV B , HIGH CONDUCTIVITY, MODERATE STRENGTH ALUM BSS7064 REV C, CERT OF ELECTRICAL CRIMP TOOLS BY GO NOGO GAG BMS8-246 REV K, MS QPL BMS5-89 T, QPL REV ORG BMS5-89 REV T, CORROSION INHIBITING ADHESIVE PRIMER BACU24CE REV B, UNION, FLARELESS FITTING END BMS7-306 REV J, QPL REV E BOEING MATERIAL SPECIFICATIONQUALI BMS8-297H, QPL REV E BPS-B-241 REV B, BRACKET, SYSTEM RACEWAY BSS7669 REV K, ASSEMBLY OF COAXIAL AND QUAD CONNECTORS AND C BACS31U REV E, INSERTS, SEAL, ELECTRIC WIRE BUNDLE BSS7100 REV R, ALTERNATIVES DOC- PROCESSES MATERIALS PAR BMS5-45 REV G, FUEL TANK SEALANT BSS7698 REV G - NONDESTRUCTIVE INSPECTION, PERSONNEL CERTIF DPS1.37 REV.AE - ELECTRICAL BONDING CONNECTIONS - MILITARY HS217 REV AA, STANDARD MACHINING, SHEET METAL FORMING, AND A BSS7055 REV B, ULTRASONIC INSPECTION, WROUGHT PRODUCTS DPS9.312 REV V, CLEANING AND DEOXIDIZING DMS 2310 REV E QPL ISSUE 10 Issued Date 11/27/2013 11/27/2013 11/26/2013 11/26/2013 11/26/2013 11/25/2013 11/22/2013 11/22/2013 11/20/2013 11/18/2013 11/14/2013 11/14/2013 11/14/2013 11/13/2013 11/12/2013 11/12/2013 11/7/2013 11/7/2013 11/6/2013 11/6/2013 11/5/2013 11/5/2013 11/5/2013 11/5/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/4/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002664 PSBO-002592 PSBO-002586 PSBO-002569 PSBO-002519 PSBO-002518 PSBO-002486 PSBO-002414 PSBO-002383 PSBO-002200 PSBO-001836 PSBO-001500 PSBO-001492 PSBO-001378 PSBO-001068 PSBO-001041 PSBO-000825 PSBO-000813 PSBO-000768 PSBO-000767 PSBO-000627 PSBO-000708 PSBO-003092 PSBO-003032 PSBO-002591 PSBO-002589 PSBO-002568 PSBO-002483 PSBO-002418 PSBO-002417 PSBO-002312 PSBO-003122 PSBO-003121 PSBO-002218 PSBO-001680 PSBO-001580 PSBO-001166 PSBO-000762 PSBO-000764 PSBO-001344 PSBO-002054 PSBO-003155 PSBO-003147 PSBO-003146 PSBO-003145 PSBO-002826 PSBO-002627 PSBO-002168 PSBO-001357 PSSA-000535 PSSA-000536 PSBO-003189 PSBO-003210 PSBO-003219 PSBO-000722 Rev. B B B B C B B C B B B B B B F E C D D C D D B C D D C D C B C B B E C B C D E B D B B B B C F C B A A B B B B Title DPS2.70-2 REV DE, ASSEMBLY SHOP PRACTICE D33101-29 REV BF, BONDING TOOL AND ROTATIONAL MOLD COMPONENT BSS7029 REV C, FPQ PROCEDURES AND REQUIREMENTS FOR COMP PART D38201-0 REV U, FACILITIES- ELECTRICAL D37520-5 REV AF, MGMT OF APPROVED FIRE RESISTANT MATERIALS F D38201-2 REV U, LIGHTING D32102-3 REV AJ, LAMINATING RESINS D33181-100 REV CA, PAINTING OF SPECIAL TOOLS D32061-16 REV W, APPLY TRIM TEMPLATE D32101-0 REV AA, BOEING PLASTICS TOOLING DOCUMENT DPS4.601 REV P, METAL GRINDING DPS3.80-5 REV AK FLUID PIPING AND FITTINGS ? FABRICATION DMS 1935, REV E, STEEL, 300M (VACUUM MELTED) DPS9.98 REV D DETONATION GUN DEPOSITED COATINGS DPS4.704 REV AY, MAGNETIC PARTICLE INSPECTION DPS9.07 REV AM, SURFACE TREATMENT OF CORROSION RESISTANT S DPS9.316 REV AJ, STRIPPING OF ORGANIC COATINGS DPS2.50 REV BG SEALING-MATERIALS AND METHODS D36001-1 REV M, BAR CODE STANDARDS D37520-1C REV W, SUPLIERS' PART PROTECT GUIDE - INTRODUCTION BAC5492 REV L, MACHINING AND CUTTING TITANIUM BAC5748 REV U, ABRASIVE CLEANING, DEBURRING, AND FINISHING BPS-N-70 REV AR, NUT, SELF-LOCKING BAC5980 REV E, NONDESTRUCTIVE INSPECTION OF COMP PARTS D33113-1 REV N, ACCOUNTABILITY OF INPLANT OUTPLANT SPECIAL T D33142-13B REV DG, LASER ALIGNMENT D32102-0 REV AJ, BOEING TOOLING RESIN AND PLASTIC MATERIALS D37522-6 REV U, COMPANY PACKAGING BMS10-60 QPL TO REV T, ORIGINA BMS10-60 REV T, PROTECTIVE ENAMEL D31102-0 REV J, MOLD DESIGN DOCUMENT DMS1592 QPL ISSUE NO. 19, QPL TITANIUM ALLOY SHEET, STRIP AN DMS 1592 REV H, TITANIUM ALLOY SHEET, STRIP AND PLATE, BAC5321 REV B, QPL REV V DPS11.06 REV K, COLOR ANODIZING DECORATIVE PARTS ST9M446 REV M, STRAP ASSEMBLY - QUICK COUPLER, LOOP ENDS DPS4.710-3-17 REV F GENERAL FABRICATION PRACTICES D33041-0 REV AJ, BOEING TOOL INDENTIFICATION CODES D33200-1 REV AH, BOEING SUPPLIER'S TOOLING BMS7-186 REV M ALUMINUM ALLOY FORGINGS BAC5300-2 REV G, METAL PART FORMING, STRAIGHTENING AND FITTI BMS8-124 REV AB QPL REV M BMS8-276 REV V, ADVANCED COMPS BMS5-154 QPL FOR REV G, ADHESIVE FOR COMP BONDING BMS5-154 REV G, ADHESIVE FOR COMP BONDING ST5M1439 REV H, CONNECTOR, PLUG, ELECTRICAL BAC5332A, QPL REV Y INSTALLATION OF MOLDABLE PLASTIC SHIM 9M830 REV G, LATCH ASSEMBLY BAIL RETENTION DPS1.088-17 REV K FABRICATING INTERIOR NONACOUSTICAL PANELS SS1027 REV 7 - JOGGLING OF ALUMINUM ALLOY SHEET STOCK SS5200 REV 0 - MINIMUM BEND RADII 9D0017 REV G, LATCH ASSY BAC5034-1 REV E TEMPORARY PROTECTION OF PRODUCTION MATERIALS DPS9.76-1 REV T, SULFAMATE NICKEL PLATING BAC5034-3 REV C TEMPORARY PROTECTION OF PRODUCTION MATERIALS Issued Date 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 11/1/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/31/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/30/2013 10/29/2013 10/29/2013 10/24/2013 10/24/2013 10/24/2013 10/22/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-000763 B PSBO-000798 B PSBO-000816 B PSBO-000903 B PSBO-000907 B PSBO-001343 B PSBO-001328 B PSBO-001327 B PSBO-001255 B PSBO-001208 B PSBO-001128 B PSBO-001070 B PSBO-000906 B PSBO-000824 B PSBO-000802 C PSBO-000789 B PSBO-003269 A PSSA-000534 A PSBO-003270 A PSBO-000078 D PSBO-000081 C PSBO-000179 B PSBO-000366 B PSBO-001079 C PSBO-001030 H PSBO-000671 D PSBO-000540 B PSBO-000367 B PSBO-000461 B GPS-TEST-0006 N PSBO-000037 G PSBO-001639 B PSBO-002716 B GPS-CORR-0006 E PSBO-000814 D PSBO-000820 D PSBO-002459 D PSBOM-000002 B PSBOM-000005 B PSBOM-000004 C PSBOM-000001 C PSBO-001952 D PSBO-001906 B PSBO-002998 B PSBO-000855 G PSBO-001341 E PSBO-002537 C PSBO-000426 B PSBO-003264 A PSBO-003265 A PSBO-003266 A PSBO-003263 A PSNG-000076 C PSSA-000090 B PSSA-000335 C Title D33041-7 REV AG FIXTURES (3) DPS9.99 C, HIGH VELOCITY OXYFUEL (HVOF) DEPOSITED COATINGS DPS3.576 REV AH AGE CONTROL OF RUBBER MMS5035 ADDENDUM 1 REV B, APPROVED MATERIAL SOURCES EPB4-232 REV U PAINT, APPLICATION OF, TO THE AH-64 HELICOPT D37520-4 REV K, PART PRESERVATION AND PROTECTION STANDARDS BAC5842 REV K, QPL CHEMICAL MILLING TITANIUM BAC5842 REV K CHEMICAL MILLING TITANIUM BAC5849 REV M BRUSH PLATING, ANODIZIING ELECTROCHEMICAL ETCH BAC5652 REV B INSPECTION OF CASTINGS BAC5004-3 REV J, BLIND FASTENER INSTALLATION DMS2380 REV D R-1 TUBING, HEAT SHRINKABLE, FLEXIBLE, IRRA EPB4-230 REV AM FINISH SPEC FOR AH-64 ADV ATT HELICOPTER DPS9.89 REV P BRUSH PLATING DMS1536 REV M TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY DPS4.710 REV M MINIMUM FABRICATION PRACTICES FOR METALS STF1037 FINISH INSTRUCTION SS8767 REV 5 SHOT PEENING OF ALUMINUM ALLOYS STF1051 FINISH INSTRUCTION PS14032 REV U - PREPARATION AND APPLICATION OF PLASTIC FILLE PS14059 REV M, LAMINATES, GLASS FABRIC REINFORCED SILICONE PS16010 REV R - IDENTIFICATION OF PARTS AND ASSEMBLIES (DOUG MMS370 REV D - STRUCTURAL ADHESIVE SYSTEM, 250 DEGREES F CUR 14M918 REV F PLASTIC TUBING, SPECIAL SHAPED SECTION-EXTRUDED PS17130.1 REV AP, CONNECT, ELECTRICAL, CRIMP TYPE: ASSY OF 11M1085 REV C STRIP, ELASTOMERIC, ONE-SIDED TAPER BAC5439 REV J ULTRASONIC INSPECTION MMS370 ADDENDUM 1 REV B - APPROVED MMS 370 MATERIAL SOURCES BSS7041 REV D - RADIOLOGIC INSPECTION, RADIOGRAPHY (FILM) ROCKWELL HARDNESS AND ROCKWELL SUPERFICIAL HARDNESS TESTING PS12050.1 REV AC, PICKLING ALUMINUM ALLOYS ST7M277 REV U, FERRULE, GROOVED CLAMP COUPLING PS20101 REV U, PROTECTION OF ACRYLICS DURING STORAGE ANODIZING, ALUMINUM ALLOYS DPS 3.17-51 REV AH LUBRICATION OF DC-10, KC-10 AND MD-11 AI DPS4.804 REV AC, FABRICATION OF HIGH STRENGTH LOW ALLOY BMS5-157 REV K, ADVANCED INSULATION BLANKET TAPES HP6-13 REV P PENETRANT INSPECTION HP9-24 REV A ALUMINUM, CLEANING OF, PRIOR TO PENETRANT INSP HP9-5 REV J, CHEMICAL CLEANING METHODS FOR METALLIC PARTS HP6-5 REV R MAGNETIC PARTICLE INSPECTION SRP1002 REV T - SHEET METAL REPAIR STOCK 4M49 REV W, SHIM GANG CHANNEL BMS15-5 REVG, WIPER, ABSORBENT, PROCESS CLEANING PS17135 REV AD, WIRE AND CABLE TERMINATION DATA D6-5000 REV AT, SPECIAL COMMERICAL AIRPLANE COMPANY FINISH BACS31N REV D, SUPPORT, PLASTIC, INDEX PIN, INSULATION PS13690 REV L - APPLICATION OF ELASTOMERIC MATERIAL STF1307 FINISH INSTRUCTION PS13327 REV N ENAMELS, HEAT RESISTANT; APPLICATION OF 1D1842_REV_NEW HINGE EXTRUDED 6M79 REV E PARABOLIC FILLETS PS14268 REV AA, CARBON FIBER REINFORCED TOUGHENED EPOXY SS9699 REV 6 ACCEPTANCE CRITERIA FOR LAMINATED AIRFRAME PART SS9690 REV 03, NON METALLIC DEVELOPMENT MATERIALS Issued Date 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/22/2013 10/21/2013 10/21/2013 10/21/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/18/2013 10/17/2013 10/16/2013 10/16/2013 10/16/2013 10/15/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/11/2013 10/10/2013 10/10/2013 10/10/2013 10/9/2013 10/8/2013 10/8/2013 10/8/2013 9/27/2013 9/26/2013 9/26/2013 9/26/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000083 PSSA-000423 PSBO-003252 PSBO-003255 PSBO-003257 PSBO-003259 PSBO-003261 PSBO-003260 PSBO-003258 PSBO-003256 PSBO-003254 PSBO-003253 PSBO-000279 PSBO-000280 PSBO-000283 PSBO-001522 PSBO-000773 PSBO-000493 PSBO-003233 PSBO-003234 PSBO-003236 PSBO-003238 PSBO-003240 PSBO-003250 PSBO-003249 PSBO-003248 PSBO-003247 PSBO-003246 PSBO-003245 PSBO-003244 PSBO-003243 PSBO-003242 PSBO-003241 PSBO-003239 PSBO-003237 PSBO-003235 PSBO-000021 PSNG-000367 PSNG-000388 PSNG-000137 PSNG-000438 PSNG-000439 PSBL-000256 PSBO-001893 PSBO-000299 PSBO-002072 PSBO-003231 PSBO-003232 PSBL-000255 PSSA-000531 PSNG-000027 PSNG-000036 PSNG-000039 PSNG-000050 PSNG-000077 Rev. C B A A A A A A A A A A C C D G C I A A A A A A A A A A A A A A A A A A M C C C A A A C G B A A A A E E D D C Title SS9208 REV 50 PRODUCT DEFINITION ACCEPTANCE CRITERIA SS9523 REV 06, FOAM, POLYURETHANE, RIGID TWO COMPONENT, POUR BAC5845 PDS 6-53, APPLICATION OFPOLYURETHANE TOPCOAT BAC5845 PSD 6-55, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 6-57, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 9-14, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 9-17, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 9-16, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 6-58, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 6-56, APPLICATION OF POLYURETHANETOPCOAT BAC5845 PSD 6-54, APPLICATION OF POLYURETHANE TOPCOAT BAC5845 PSD 6-49, APPLICATION OFPOLYURETHANE TOPCOAT PS21206 REV N - RADIOGRAPHIC INSPECTION - GENERAL PS21206.1 REV H, RADIOGRAPHIC INSPECTION OF METALLIC AND CO PS21211 REV M, ULTRASONIC INSPECTION OF WROUGHT METALS MMS420, REV BC, ADD 1 APPROVED MMS 420 MATERIAL SOURCES PS11307 REV T STRAIN SENSORS FOR FATIGUE STRAIN RECORDER PS21202 REV AR PENETRANT INSPECTION BACR10AL REV L RETAINER, FLOATING BARREL NUT BACB10HH REV T BEARING,TRACK ROLLER, NARROW,SINGLE ROW NEED BACB28AP REV T BUSHING,FLANGED, UNDERSIZE BORE,NOMINAL AND BACC30BH REV AB COLLAR,PRELOAD, TENSION, REDUCEDHEX, CRES BACN10Z REV NEW NUTPLATE, SELF?LOCKING,HIGH TEMPERATURE, 82 BACW10BP REV AE WASHER,PLAIN AND COUNTERSUNK,(NOMINAL, .015 BACN10YU REV G NUT,SPACER PLATE, TRIANGLE BASE,LIGHT DUTY BACR15BB REV BB RIVET,UNIVERSAL HEAD, CLOSETOLERANCE SHANK BACR15BA REV BB RIVET,100 DEG PRECISION HEAD,CLOSE TOLERANC BACP18BC REV D PIN,COTTER (SPLIT) BACN11G REV R NUT, PLATE, SELF-LOCKING, FLOATING,VARIABLE C BACN10GH REV U NUT,SPACER PLATE, TWO LUG,LIGHT DUTY (THREAD BACN11U REV D, NUT,JAM, DRILLED AND UNDRILLED,STANDARD AND BACJ40AP REV ORG JUMPER ASSEMBLY,BONDING, ELECTRICAL,INSULA BACF3F REV AF FILLER,FLAT, RECTANGULAR,ALUMINUM ALLOY BACC30BL REV H COLLAR,PRELOAD, SHEAR, 7075?T73 ALUMINUMALL BACB28AK REV L BUSHING,PLAIN (FOR CLAMPEDINSTALLATION) BACB30NX REV BE BOLT,PROTRUDING HEAD, HEX DRIVE,TENSION, PS11270 REV BC, SEALING METHODS, (C-17 AIRCRAFT) GC130N REV K, COATING, POLYURETHANE, TWO-COMPONENT GP110H REV AE, PAINT, LACQUER, ACRYLIC, MIL-L-81352 GP100J REV T, PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE AML4364 PRODUCT: ADHESIVE, STRUCTURAL, 250? F - 350? F CURE GM4364 ADHESIVE, STRUCTURAL,250OF - 350OF CURE BPS4558-2 INSTALLATION OF NUT PLATES UTILIZING COLD EXPANSI ST9M626 REV M, MOUNT, SESILIENT-VIBRATION, LIGHT LOAD, FUEL PS21330 REV AL - ACCEPTANCE, REINSPECTION AND STORAGE OF STR PS21330 REV AL DEV 1, ACCEPTANCE, REINSPECT & STOR OF STRUCT DPS1.624-1 REVB BLEED PROCESS - DMS 2224 PREPREG DPS1.624 REV V AUTOCLAVE PROCESSING OFADVANCED COMPOSITE PRE MB1658 REV R SEALING COMPOUND, CORROSION INHIBITED SS8743 REV 7 STAKING OF GROOVED PLAINSPHERICAL BEARINGS PS13375 REV AD, APPLICATION OF EPOXY PRIMER PS16001 REV BU, MARKING OF FABRICATED PARTS PS19402 REV AN, HOLE PREPARATION-FEEDS AND SPEEDS PS23023 REV V HARDNESS AND ELECTRICAL CONDIUCTIVITY INSP PS12040 REV AC, CLEANING, ABRASIVE Issued Date 9/25/2013 9/25/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/19/2013 9/18/2013 9/18/2013 9/18/2013 9/18/2013 9/18/2013 9/18/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/12/2013 9/11/2013 9/11/2013 9/11/2013 9/10/2013 9/10/2013 9/10/2013 9/4/2013 9/4/2013 8/30/2013 8/30/2013 8/27/2013 8/27/2013 8/26/2013 8/26/2013 8/22/2013 8/22/2013 8/22/2013 8/22/2013 8/22/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000083 PSNG-000082 PSNG-000081 PSNG-000070 PSBO-000204 PSBO-000274 PSBO-002876 PSBO-001957 PSBO-000469 PSBL-000253 PSBL-000254 GPS-ASSY-0002 PSBO-000028 PSBO-002794 PSBO-000088 PSBO-000060 PSBO-002798 PSBO-002838 PSBO-003230 PSBO-003229 PSNG-000089 PSNG-000138 PSNG-000153 PSNG-000102 PSNG-000383 PSBO-001499 PSBO-003228 GPS-ASSY-0001 PSBO-003226 PSBO-003227 PSSA-000530 PSBO-000495 PSBO-003044 PSBO-002184 PSBO-000177 PSBO-000854 PSBO-002516 PSBO-002837 PSBO-000997 PSBO-000514 PSBO-000844 PSBO-003197 PSBO-001754 PSBO-003225 PSBO-003222 PSBO-003223 PSBO-000046 PSBO-000480 PSBO-000199 PSBO-001466 PSBL-000250 PSBL-000251 PSBO-000292 PSBO-003221 PSBO-000092 Rev. B B D B E K B D B A A A B C F F B B A A B B C C B B A B A A A B C B B D C B F B D B B A A A F E E D A A D A C Title PS19145 REV AD, INSTALL OF HI-LOK FASTENERS PS19000 REV Y, INSTALLATION OF FASTENERS PS14032 REV U, PREPARATION AND APPLICATION OF PLASTIC FILLER PS21211.5 REV C ULTRASONIC INSP OF METALLIC, BONDED, OR BRAZ PS19146 REV P, FASTENERS, TAPER-LOK; INSTALLATION PS21201 REV AE - MAGNET PARTICLE INSPECTION (EXPORT CONTROL PS20650.3 REV F, CHEMICAL BLANKING SRP 1103 (AC) - PRESS-FIT BUSHING REPAIR FOR HOLES PS21221 REV F - NONDESTRUCTIVE TESTING OF SUPERPLASTIC FORME BPS4007 REV P PASSIVATION BPS4140 REV G HEAT TREATMENT OF STEEL GRIT BLAST OF METAL AND COMPOSITE PARTS PS12011 REV H - CLEANING, AQUEOUS, HAND OR IMMERSION 4M373 REV F, LOCKNUT AND RETAINER ASSEMBLY PS14124 REV P, SANDWHICH MATERIAL, HONEYCOMB CORE PS13525 REV AC - POLYURETHANE CORROSION RESISTANT COATING, S ST9M583 REV C, MOUNT RESILIENT ST9M425 REV G, MOUNT, RESILIENT-VIBRATION, LIGHT LOAD PS14130 REV P SKINS, STRUCTURAL, BORON/EPOXY, FABRICATION A PS14290_REV_T_DEV_9_GKN GA100BD REV AA, ADHESIVE, EPOXY, PASTE GP100M REV K, PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE AML4362 REV 5, APPROVED MATERIALS LIST GS180C REV CK, SHAPE GP20A REV CH, PROCESS AND FINISH CODES 4M297 REV L BEARING, PLAIN, SELF?ALIGNING ? SELF?LUBRICATING DMS2082 SE 030-MC ADHESIVE DEFLASH USING CORN STARCH MEDIA DPS4.706 REV M DPS5.00-2 REV AR SS8604 REV 03 SEALING COMPOUNDS, HIGHADHESION FUEL TANK AND PS20650 REV E CHEMICAL BLANKING DPS4.747 REV G, NONDESTRUCTIVE TESTING PROCEDURE APPROVAL 5M2483 REV D, SWITCH, ROTARY WITH PUSHBUTTON CONCENTRIC SHAF PS16001.12 REV C - DOT PEEN MARKING OF METAL PARTS PS17113 REV V, LACING AND TYING OF WIRING MMS545 REV M, BORON EPOXY PREPREG MATERIAL PS16011 DEV 2, MARKING METHODS AND MATERIALS PS17153 REV AH, TERMINATION & GROUNDING OF SHIELDING ON WIRE PS16011.4 REV A, DOT PEEN MARKING OF C-17 AND COMMERCIAL MET 30M-NAS561 REV E SUPPLEMENT FOR NAS 561 6M248 REV C, BUSHING INSTALL- COUNTERSINK SWAGED RETENTION DMS2082 REV E SEALING COMPOUND, INTEGRAL FUEL TANKS & FUEL 9M663 REV D CLOSURE ORIFICE - AIR INLET SEAL DQSCN14 REV NEW GENERAL CONTOUR WAVINESS AND MISMATCH C-17 DQSCN13 REV NEW GENERAL CONTOUR WAVINESS AND MISMATCH C-17 PS12300 REV AF - FLUID-CARRYING PARTS AND ASSEMBLIES (EXCEPT PS23023 REV W, HARDNESS AND ELECTRICAL CONDUCTIVITY INSPECT PS19121 REV Y, FASTENERS, LOCKED SPINDLE BLIND RIVETS, INST ST3M781 REV AC, FASTENER-BLIND, INTERNALLY THREADED, EXTERN 299-947-547 REV A, ACCEPTANCE CRITERIA AND IN-PROCESS REWORK 299-947-326 REV N, FABRIC, WOVEN, EPOXY RESIN-IMPREGNATED GL PS21240 REV K, NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATI 4M399 REV B BUSHING - SPECIAL, OVERSIZE PS10000 REV AC, MATERIAL AND PROCESS SPECIFICATION CONTROL Issued Date 8/22/2013 8/22/2013 8/22/2013 8/22/2013 8/21/2013 8/21/2013 8/21/2013 8/21/2013 8/21/2013 8/20/2013 8/20/2013 8/20/2013 8/14/2013 8/14/2013 8/14/2013 8/7/2013 8/7/2013 8/7/2013 8/7/2013 8/5/2013 8/1/2013 8/1/2013 8/1/2013 8/1/2013 8/1/2013 7/31/2013 7/31/2013 7/30/2013 7/29/2013 7/29/2013 7/25/2013 7/24/2013 7/24/2013 7/24/2013 7/16/2013 7/16/2013 7/16/2013 7/16/2013 7/16/2013 7/16/2013 7/15/2013 7/15/2013 7/12/2013 7/11/2013 6/28/2013 6/28/2013 6/27/2013 6/27/2013 6/27/2013 6/21/2013 6/20/2013 6/20/2013 6/19/2013 6/19/2013 6/6/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000526 PSSA-000528 PSSA-000529 PSPW-000021 PSBL-000248 PSBL-000249 PSBO-000085 PSBO-003205 PSBO-003215 PSBO-003217 PSBO-003216 PSBO-001385 PSBO-000372 PSBL-000247 PSBO-001777 PSBO-000546 PSBO-000301 PSBO-000201 PSBO-003213 PSBO-003212 PSSA-000524 PSSA-000522 PSSA-000523 PSBO-003211 PSBL-000245 PSBL-000246 PSBO-000202 PSBO-000233 PSBO-001114 PSBO-002039 PSBO-000449 PSBO-000276 PSBO-002773 PSBL-000244 PSPW-000022 PSBO-003208 PSSA-000521 PSBO-003204 PSBO-003206 PSBO-003207 PSBO-001684 GPS-TEST-0007 PSBO-000790 PSBO-003160 PSBO-000196 GPS-SHOP-0003 PSBL-000238 PSBO-003201 PSBL-000241 PSBL-000233 PSBO-003200 PSBL-000237 PSBL-000236 PSBL-000235 PSBL-000234 Rev. A A A C A A G A A A A B H A D B D F A A A A A A A A E B D B E B B A D A A A A A B I E B D E A A A A A A A A A Title SS8407 REV 11, STRESS RELIEF AND EMBRITTLEMENT RELIEF BAKING SS8460 REV 2, CLEANING OF STEEL PARTS SS8460 AMEND 2, CLEANING OF STEEL PARTS PWA36463 REV B - TACKIFIER, EPOXY RTM HPO3 BPS4018 REV T, INSTALLATION AND TIGHTENING PROCEDURES FOR TH 160-007 REV AN, TORQUE VALUES,THREADED FASTENERS, FLUID FITT PS14111 REV T, MACHINING AND DRILLING COMPOSITES DPS4.713 SPECO DMS2200 REV G, ADHESIVE, 350 DEGREES F (177 DEGREES C) CURE, DPS1.834-3.17 REV AJ, MISCELLANEOUS ELECTRICAL CONNECTORS DMSQPL2200 ISSUE 11, ADHESIVE, 350?F (177?C) CURE, MULTIPURP DPS1.834-40.3 REV BL, ELECTRICAL TOOL CODES-COMMERCIAL MMS5005 REV T, COMPOSITE SURFACE SCRIMS, MODERATE TEMPERATU MB1658 REV R, SEALING COMPOUND, CORROSION INHIBITED 5M3185 REV C, GUARD - SWITCH BAC5753 REV U CLEANING, DESCALING AND SURFACE PREPARATION OF PS21332 REV N, ACCEPTANCE, REINSPECTION, AND STORAGE OF CAR PS19127 REV T- FASTENERS, HUCK BLIND BOLTS; INSTALLATION O PS21239.2 REV A, COATING THICKNESS MEASUREMENT BY DIRECT RE 1MA240 REV E ALUMINUM ALLOY RECTANGULAR BAR - EXTRUDED SS8774 REV - AMENDMENT SHEET 2, SHOT PEENED PARTS, LOCAL ROT SS8774 REV - , SHOT PEENED PARTS, LOCAL ROTO PEEN REWORK SS8774 REV - AMENDMENT SHEET 1, SHOT PEENED PARTS, LOCAL ROT STF1724 REV F FINISH INSTRUCTION BPS4456 REV B, ANTI-FRETTING TREATMENT FOR TITANIUM BPS4478-2 FABRICATION OF ROOM TEMPERATURE CURING LAMINATED C PS19135 REV AA, FASTENERS, JO-BOLT TYPE BLIND BOLTS; INSTALL PS20209.1 REV D - REPAIR METHODS FOR DELAMINATIONS IN FIBER PS13630.2 REV M, FINAL PAINT OF F/A-18 AND AV-8 AIRCRAFT 6M212 REV J, TUBING ENDS,ADHESIVE BONDED TUBE JOINT, DIMENSI MMS332 REV R - HIGH TEMPERATURE RESISTANT FUEL TANK FILLETI PS21203 REV K - HARDNESS TESTING OF PARTS AND MATERIALS 40M123 REV D, MILITARY AIRCRAFT AND WEAPON PROGRAMS PARTS MG BPS4424 REV G NONDESTRUCTIVE INSPECTION OF BONDED AND COMPOS PWA36464 REV C - RESIN, EPOXY, RESIN TRANSFER MOLDING DMSQPL2233 ISSUE 21 PLATE, ALUMINUM ALLOY, 7050 SS8711 REV 01 TITANIUM AND TITANIUM ALLOYS, STRESS RELIEVING DPS4.713 REV AK ULTRASONIC INSPECTION - WROUGHT METALS DMS2223 REVISION C WEBBING, TEXTILE, NYLON DMSQPL2223 ISSUE NO 3 WEBBING, TEXTILE, NYLON ST9M558 REV H STRAP, TETAINING - CUSHIONED, TUBE SUPPORT ELECTRICAL CONDUCTIVITY TESTING REQUIREMENTS DPS9.45 REV AW CONVERSION COATINGS FOR ALUMINUM DPS11.05-2 REV F, SULFURIC ACID ANODIZING - THIN FILM PS19110 REV W, FASTENERS, SOLID RIVETS; INSTALLATION MOLD RELEASE APPLICATION BPS4589 VAR 1 PS14290 REV T, PSD GKN REV 9, COMP AND BONDING CURE CYCLE BPS4555 VARIATION REQUEST - 80-ABF-DSS-13-132 299-947-074 REV U, PREMIXED, PREFROZEN SEALANTS DPS4.50-36-17 REV B. EPOXY (FR) COATING SYSTEM MB1828 REV B SEALANT, CORROSION INHIBITIVE, ELECTRICALLY CON MB1800 REV C SEALING COMPOUND, CORROSION INHIBITED, PREMIXE MB1772 REV E SEALANT, LIGHT WEIGHT MB1771 REV F SEALANT, LOW TEMPERATURE CURE Issued Date 6/6/2013 6/6/2013 6/6/2013 5/23/2013 5/21/2013 5/21/2013 5/17/2013 5/17/2013 5/17/2013 5/17/2013 5/17/2013 5/17/2013 5/17/2013 5/16/2013 5/16/2013 5/16/2013 5/16/2013 5/16/2013 5/14/2013 5/7/2013 5/7/2013 5/7/2013 5/7/2013 4/30/2013 4/22/2013 4/22/2013 4/19/2013 4/19/2013 4/19/2013 4/19/2013 4/19/2013 4/19/2013 4/19/2013 4/18/2013 4/17/2013 4/15/2013 4/15/2013 4/12/2013 4/12/2013 4/12/2013 4/11/2013 4/8/2013 4/5/2013 4/5/2013 4/1/2013 4/1/2013 3/27/2013 3/27/2013 3/27/2013 3/26/2013 3/26/2013 3/26/2013 3/26/2013 3/26/2013 3/26/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSSA-000084 D PSSA-000282 D PSSA-000513 A GPS-FABR-0010 B PSSA-000520 A PSSA-000519 A PSSA-000518 A PSSA-000516 A PSSA-000515 A PSSA-000514 A PSSA-000433 B PSSA-000162 C PSSA-000147 C PSSA-000011 B PSBO-000025 E PSNG-000436 A PSBO-003199 A GPS-PSMR-0001 A GPS-PSMR-0003 A GPS-PSMR-0004 A GPS-PSMR-0002 A PSBL-000232 A PSSA-000327 B PSGS-000078 A PSBO-000446 B PSBO-001074 B PSBO-002718 B PSBO-001665 D PSBO-003196 A PSBO-003198 A PSGS-000046 A PSGS-000054 A PSGS-000063 A PSGS-000062 A PSGS-000061 A PSGS-000060 A PSGS-000059 A PSGS-000058 A PSGS-000057 A PSGS-000056 A PSGS-000055 A PSGS-000072 A PSGS-000071 A PSGS-000070 A PSGS-000069 A PSGS-000068 A PSGS-000067 A PSGS-000066 A PSGS-000065 A PSGS-000064 A PSGS-000077 A PSGS-000076 A PSGS-000075 A PSGS-000074 A PSGS-000073 A Title SS9211 REV 9 FLIGHT SAFETY PARTS SOURCE APPROVAL, QUALITY AN SS8693 REV 07, BRUSH COATING AND TOUCH UP SS8622 REV 6 AMD 1, MULTIPLE PART PASTE ADHES FIBER PLACED CARBON/EPOXY LAMINATES, FABRIC AND ACCEPT OF SS8705 REV 17 DEV 14, SURFACE TEMPER ETCH INSPECTION SS8705 REV 17 DEV 13, SURFACE TEMPER ETCH INSPECTION SS8705 REV 17 DEV 03, SURFACE TEMPER ETCH INSPECTION SS8630 REV 24 DEV 1, SEALING AND INSULATION OF MATING SURF SS8622 REV 6 AMD 3, MULTIPLE PART PASTE ADHES SS8622 REV 6 AMD 2, MULTIPLE PART PASTE ADHES SS4011 REV 5, PRESS FIT PARTS- ASSEMBLY OF INTERFERENCE FITS SS8705 REV 17, SURFACE TEMPER ETCH INSPECTION SS9213 REV 05, SUPP TO MATERIAL AND PROCESS SPECIFICATIO SS8809 REV 3, INSPECTION, ULTRASONIC, NON-METALICS, PROCES PS11345 REV R, SEALING AND LEAK TESTING OF ADHESIVE BONDED GP111A REV E. PRIMER, ONE PART ADHESION PROMOTER FOR SILICON BAC5307 PSD6-286, PART MARKING 1024-005P, ACCEPTANCE TEST PROCEDURE FOR P&W CASCADE 800-CAS-2, ORIG ULTRASONIC TESTING TECH FOR COMP BONDED 800-CAS-3, SHORT BEAM SHEAR TEST SAMPLING PLAN FOR FAN 800-CAS-1, INSTRUCTIONS FOR PW4168 CASCADE INSP GAGE MB1733 REV F, SHIMMING COMPOUND, FILLED RESIN SS9639 REV 1, EPOXY IMPREGNATED EXPANDED COPPER FOIL GAMPS 3210 REV A, PROTECT AND HANDLING OF MATERIALS AND PART PS14211.2 REV G - SUPERPLASTIC FORMING (SPF) OF TI-6AL-4V TI PS14211 REV P SUPERPLASTIC FORMING (SPF) OF TITANIUM ALLOY PS14211 REV P PSD GKN REV 1, SUPERPLASTIC FORMING PS20107 REV P, TIRES, AIRCRAFT: STORAGE, HANDLING AND MOUNTI MMS5063 ADD 1, APPROVED MMS5063 MATERIAL SOURCES STF1617, FINISH INSTRUCTION GAMPS 5108 REV E, HEAT TREATING OF ALUMINUM ALLOYS GAMPS 6201 REV C SCN 3, ANODIC COATINGS GAMPS 9101 REV B, ULTRASONIC QUALITY RQMTS FOR ALUM AND ALUM GAMPS 8310 REV -, STANDARD MACHINING, DRILLING AND TRIMMING GAMPS 7115 REV E SCN 4, REQMTS FOR SEAL PRESS, UNPRESS, AND GAMPS 7115 REV E SCN 3, REQMTS FOR SEAL PRESS, UNPRESS, AND GAMPS 7115 REV E SCN 2, REQMTS FOR SEAL PRESS, UNPRESS, AND GAMPS 7115 REV E SCN 1, REQMTS FOR SEAL PRESS, UNPRESS, AND GAMPS 7115 REV E, REQMTS FOR SEALING PRESS, UNPRESS, AND ENV GAMPS 7102 REV D SCN 2, SEALING OF SURFACES FOR AERODYNAMIC GAMPS 6201 REV C SCN 4, ANODIC COATINGS GMS 4113, LIGHT LENSE AND WINDSHIELD SEALANT GMS 4003 REV D SCN 4, SHIM MATERIAL, CAST PLASTIC, EPOXY RES GAT11F REV N SCN 1, TERMINAL INSTALLATION - ELECTRC GROUND A GAS186SU REV B, SHAPE - ZEE, LONGERON, SPECIAL GAS183A REV R, SHAPE - TEE EXTRUDED GAS182H, SHAPE - CHANNEL, EXTRUDED, SPECIAL GAR501F REV E, RIVET- SOLID, UNIVERSAL HEAD, ALUMINUM ALLOY GAR501E REV D. RIVET- SOLID, COUNTERSUNK 100 PRECISION HEAD GAN11AC, NAMEPLATE OVERCOAT, PLACARD AND PANEL PROTECT COATI SQAR-9100 REV_A, GULFSTREAM AEROSPACE CORP SHIPPING, MARKING AND PACKING INSTRUCTIONS GMS 5006 SCN 3, EPOXY TOPCT, HI SLID, DIPHOSPH ESTER HYDRAU GMS 5005 REV A, EPOXY PRIMER COATING, WATER REDUCIBLE GMS 4114 REV A, AERODYNAMIC SMOOTHING COMPOUND Issued Date 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/20/2013 3/8/2013 3/7/2013 3/7/2013 3/5/2013 3/4/2013 3/4/2013 3/4/2013 3/4/2013 2/25/2013 2/25/2013 2/25/2013 2/20/2013 2/20/2013 2/20/2013 2/19/2013 2/19/2013 2/19/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSGS-000053 PSGS-000048 PSGS-000050 PSGS-000051 PSGS-000052 PSGS-000049 PSGS-000047 PSBO-000621 PSGS-000041 PSGS-000040 PSGS-000039 PSGS-000038 PSGS-000036 PSGS-000035 PSGS-000034 PSGS-000033 PSGS-000032 PSGS-000045 PSGS-000044 PSGS-000043 PSGS-000042 PSGS-000031 PSGS-000030 PSGS-000028 PSGS-000027 PSGS-000026 PSGS-000025 PSGS-000024 PSGS-000006 PSGS-000005 PSGS-000004 PSGS-000003 PSGS-000002 PSGS-000001 PSBO-003195 PSBO-003194 PSBO-003193 PSGS-000023 PSGS-000022 PSGS-000021 PSGS-000020 PSGS-000019 PSGS-000018 PSGS-000017 PSGS-000016 PSGS-000015 PSGS-000014 PSGS-000013 PSGS-000012 PSGS-000011 PSGS-000010 PSGS-000009 PSGS-000008 PSGS-000007 PSBO-000759 Rev. A A A A A A A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C Title GAMPS 6201 REV C SCN 2, ANODIC COATINGS GAMPS 5108 REV E SCN 2, HEAT TREAT OF ALUMINUM AND ALUMINUM GAMPS 6113 SCN 4, CHEM CONVERSION COATING GAMPS 6201 REV C, ANODIC COATINGS GAMPS 6201 REV C SCN 1, ANODIC COATINGS GAMPS 5108 REV E SCN 3, HEAT TREAT OF ALUMINUM AND ALUMINUM GAMPS 5108 REV E SCN 1, HEAT TREAT OF ALUMINUM ALLOYS BAC5034 REV N, TEMPORARY PROTECTION OF PRODUCTION MATERIALS GAMPS 4105 REV B, ALKALINE CLEANING OF FERROUS AND NON-FERRO GAMPS 4103 REV B SCN 2, ACID CLEAN AND PASSIVA OF FERR AND N GAMPS 4102 REV B, ACID CLEANING OF ALUMINUM AND ALUMINUM ALL GAMPS 4101 REV A, PREP OF SURFACES BY ABRASIVE METHODS GAMPS 3216 REV A SCN 2, EPOXY TOPCOAT, HI SOLIDS, PHOSP ESTE GAMPS 3116 REV B SCN 4, PRIMER, EPOXY, WATERBORNE, PREP AND GAMPS 3116 REV B SCN 3, PRIMER, EPOXY, WATERBORNE, PREP AND GAMPS 3116 REV B SCN 2, PRIMER, EPOXY, WATERBORNE, PREP AND GAMPS 3116 REV B SCN 1, PRIMER, EPOXY, WATERBORNE, PREP AND GAMPS 5102 REV B SCN 4, HEATTREAT OF WROUGHT PRECIP HARDEN S GAMPS 4122 SCN 2, SOLVENT WIPE CLEANING GAMPS 4122, SOLVENT WIPE CLEANING GAMPS 4107 REV A SCN 4, CLEANG AND DESCAL OF TITANI AND TITA GAMPS 3116 REV B, PRIMER, EPOXY, WATERBORNE, PREP AND APP OF GAMPS 3102 REV H SCN 1, INTEGRAL FUEL TANK COATING GAMPS 2701 REV A SCN 1, CHEMICAL MILLING OF ALUMINUM ALLOYS GAMPS 2605 REV B, ELECTRICAL BONDING REQMTS GAMPS 2431 REV A, THERMOFORMING OF THERMOPLASTIC SHEETS GAMPS 2309 REV B, FUSION WELDING OF ALUMINUM AND ALUMINUM AL GAMPS 2226 REV B SCN 2 GAH11F REV D, HOLE-FLANGED, LIGHTENING GAF14A REV U SCN 2, INDIVIDUAL FINISH AND PROCESS CODES GAF14A REV U, INDIVIDUAL FINISH AND PROCESS CODES GAC-CR 00041 REV A, GVI FUEL SYSTEM MECHANICAL INTERFACE GAC14D REV-, CONTROL, SERIALIZATION AND TRACEABILITY APPROVED PROCESS SOURCES MAY 2010. BSS7011 SSD6-1, GUIDELINES FOR THE APPLICATION OF PAINT BSS7011 REV C, GUIDELINES FOR THE APPLICATION OF PAINT BSS7413, NON-DESTRUCTIVE THICKNESS MEASUREMENT OF NONGAMPS 2222 REV B, INSTALL OF MECHL FASTEN IN NON METALLIC MA GAMPS 2220 REV D, INSTALL AND INSPECT OF BOLTS SCREWS AND NU GAMPS 2206 REV B SCN 3, INSTALL OF HI SHEAR TYPE FASTENERS I GAMPS 2203 REV B SCN 1, INSTALL OF BLIND RIVETS GAMPS 2202 REV B, INSTALL OF SOLID AND TUBULAR RIVETS GAMPS 2201 REV C, INSTALL OF HI STRENGTH, THREADED, BLIND ME GAMPS 2114 SCN 3, SHIMMING PROCESS SPEC GAMPS 2112 SCN 2, AUTOCLAVE FORMING OF THE GIV UPPER WING PA GAMPS 2109 REV A SCN 2, STAND MACH PRACT AND CONTROL OF MACH GAMPS 2109 REV A, STAND MACH PRACT AND CONTROL OF MACHINED P GAMPS 2106 REV C SCN 1, FORMING AND FAB OF TITANIUM AND TITA GAMPS 2102 REV B, PEENING OF FERROUS AND NON-FERROUS ALLOYS GAMPS 2101 REV D SCN 1, FABRICATION OF ALUMINUM ALLOYS GAMPS 2101 REV D, FABRICATION OF ALUMINUM ALLOYS GAMPS 1106 REV A SCN 2, ID MARKING OF FAB NON-METALLIC PARTS GAMPS 1105 REV C, ID MARKING OF FAB METALLIC PARTS AND ASSE GAMP 9102 REV C, ULTRASONIC INSPECT OF LOW ALLOY AND STAINLE BSS7039 REV B LIQUID PENETRANT INSPECTION Issued Date 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/14/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 2/13/2013 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000746 PSBL-000228 PSBL-000230 PSBL-000229 PSSA-000283 PSSA-000284 PSSA-000319 PSSA-000320 PSBL-000222 PSBL-000225 PSBL-000223 PSBO-003191 PSBO-000010 PSBO-003190 PSBO-002156 PSNG-000432 PSBO-001715 PSBO-002073 PSBO-002182 PSBL-000219 PSBL-000220 PSBL-000221 PSBL-000217 PSBL-000218 PSBL-000214 PSBL-000216 PSBL-000213 PSBL-000004 PSBO-000237 PSBO-003186 PSBO-000785 PSBO-000996 PSBL-000212 PSF22-000501 PSF22-000178 PSF22-000535 PSF35-000309 PSF35-000304 PSF35-000170 PSF35-000131 PSF22-001463 PSBL-000209 PSBL-000210 PSBL-000211 PSBO-003184 PSBO-000448 PSBO-000521 PSBO-000472 PSNG-000032 PSNG-000078 PSBL-000203 PSNG-000186 PSBL-000205 PSBL-000206 PSBL-000204 Rev. B A A A B C F B A A A A E A B B B B B A A A A A A A A B B A B B A B G C F B B C B A A A A B B B D D A B A A A Title BAC5034-2 REV B,TEMPORARY PROTECTION OF PRODUCTION MATERIALS 299-100-840 REV P, FATIGUE CONTROLLED COMPONENTS 299-947-478 REV K, RQMT SPEC FLIGHT SAFETY PARTS PROGRAM 299-099-796 REV K, RQMTS SPEC: CRITICAL PARTS PROGRAM SS8786 REV 04, PAINT STRIPPING, IMMERSION BRUSH ON METHOD SS9170/161 REV 03, EMM VACUUM BAG BLEEDER MATERIAL SS9300 REV 31, TORQUE, WRENCH AND TIGHTENING SS9524 REV 03, FOAM, POLYURETHANE, RIGID BALLISTIC, MOLDED P BPS4335 REV C, ADHESIVE BONDING OF NAMEPLATES QPS106 BELL HELICOPTER ACCREDITED SUPPLIER INSPECTION CONVE SUPPLIER DESIGNED PRODUCT QUALITY REQUIREMENTS SRP6802 REV F, STANDARD REPAIR PROCEDURE PS11015 REV L - CEMENTING METAL 17P9M2007 REV U, NDT INSPECT PROCEDURES ST5M1444 REV D, SWITCH-ROTARY, 4 POLE, 16 POSITION, LOW CURR GR501AT REV G, RIVET 100 FLUSH SHEAR HEAD, 7050 ALUMINUM 40M114 REV M, DRAWING INTERPRETATION DOCUMENT PS21330 REV AK SUP 1 AIS, ACCEP, REINSPECT & STOR OF STRUCTU ST5M1417 REV N, CONNECTOR, COAZIAL, RADIO FREQUENCY-THREADED MB1250 REV J, TACK RAG MB1373 REV K, ABRASIVE COATED CLOTH AND PAPER PD-M-125-08 REV B, INSPECTION STATUS STAMPS MB1045 REV AA EPOXY ENAMEL MB1568 REV R COATING POLYURETHANE, HIGH SOLIDS MB1047L, EPOXY PRIME QPS111 REV 2, SUBCONTRACT TOOLING 299-947-140 REV F, REQMTS SPEC: PRIMARY PARTS PROGRAM BPS4352 REV L,SURFACE PREP OF MATERIALS FOR ADHESIVE BONDIN PS20509 REV U, AREA REQUIREMENTS FOR ADHESIVE BONDING/COMPO PS20509 (U) REV 1 PSD F-15 AND F-4, AREA REQMTS FOR ADHESIVE 6M51 REV V, STANDARD JOGGLES PS17129 REV F CONNECT, FLUID SYSTEM, RYNGLOK, SWAGING & INST BPS4453 REV C, CONDUCTIVITY INSPECT OF WROUGHT ALUMINUM ALL 5PTPRT07-C-A01, CABLE SHIELD TERMINATIONS 5PTMYL02-T, AUTHORIZRD MATERIAL SUB FOR USE ON THE F-22 A 5PD40835-M, AUTHORIZED MATERIAL SUBS FOR USE ON THE F22 LMA-PR012F, COAXIAL CABLE ASSEMBLY, INSTALL, AND TESTING LMA-PR003B, DESIGN, MFG, INSTALL, AND TESTING OF AIRCRAFT HA LMA-MU001A, SEALING CAPS FOR INTEGRAL FUEL TANK FAST SYST LMA-ML075C, FAST CURING ACRYLIC ADHESIVE LMA-M7060A, MECHANICALLY STRENGTHENED CORROSION RESISTANT 299-947-125 REV G, ADHESIVE, ROOM TEMP CURING TWO PART EPOXY MB1310 REV D, TAPE FLATBACK HIGH ADHESION BPS4389 REV C EO, CHEMICAL MILLING PS17039 REV G, INSTALLATION AND ASSEMBLY PROCEDURES MMS728 ADDENDUM 1 REV B - APPROVED MMS 728 MATERIAL SOURCES PS17001.1 REV R, TORQUE VALUES FOR FLUID LINE CONNECTIONS MMS417 REV H, CONDUCTIVE COATING PS14223 REV V, FABRICATION, PROCUREMENT AND ACCEPTANCE OF PS13630.1 REV AD, PAINTING AT DETAIL AND ASSEMBLY LEVEL MB1008 REV J, ALUMINUM DEOXIDIZER T-103 REV E, PENETRANT INSPECTION MB1708, RUBBER CEMENT BPS4352 REV K VARIATION 1, MB1702 REV C NON-CHROMATED LIQUID DEOXIDIZERS Issued Date 2/13/2013 2/12/2013 2/12/2013 2/12/2013 2/8/2013 2/8/2013 2/8/2013 2/8/2013 2/7/2013 2/7/2013 2/7/2013 2/4/2013 1/23/2013 1/23/2013 1/23/2013 1/23/2013 1/18/2013 1/18/2013 1/18/2013 1/17/2013 1/17/2013 1/17/2013 1/15/2013 1/15/2013 1/11/2013 1/11/2013 1/10/2013 1/4/2013 1/2/2013 1/2/2013 12/21/2012 12/21/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/18/2012 12/14/2012 12/14/2012 12/14/2012 12/13/2012 12/6/2012 12/6/2012 12/6/2012 12/4/2012 12/4/2012 11/30/2012 11/30/2012 11/30/2012 11/30/2012 11/30/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-003181 PSBO-003182 PSBO-000777 PSBO-001503 PSBO-002671 PSSA-000512 PSNG-000163 PSNG-000167 PSNG-000172 PSNG-000211 PSNG-000217 PSNG-000259 PSNG-000272 PSNG-000435 PSNG-000260 PSNG-000219 PSNG-000213 PSNG-000209 PSNG-000176 PSNG-000166 PSBO-000333 PSBO-003066 PSBO-000994 PSBO-000774 PSBO-000388 PSBO-002742 PSBL-000200 PSBO-003180 PSBO-000103 PSBO-003179 PSBL-000037 PSBL-000199 PSBL-000198 PSBL-000197 PSBL-000196 PSBL-000195 PSBL-000194 PSBL-000193 PSBL-000192 PSBL-000191 PSBL-000190 PSBL-000189 PSBL-000188 PSBL-000186 PSBO-003177 PSBO-001373 PSBO-003176 PSBL-000183 PSSA-000511 PSNG-000434 PSNG-000433 PSBO-003175 PSBO-000225 PSBO-000066 PSBL-000184 Rev. A A G B B A B B B B B B B A B B B B B B L C D C B C A A F A D A A A A A A A A A A A A A A B A A A A A A D E A Title BMS10-20N, CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANK BMS10-20N QPL REV ORG PS17140 REV BC, CONNECTOR, ELECTRICAL, RADIO FREQUENCY MMS1205 REV T, TITANIUM SEAMLESS TUBING, COLD WORKED AND S 6M39 REV AB, STANDARD BEND RADII SS3995 REV 1, SHIPPING AND PROTECTIVE CLOSURES H-102 REV B, HEAT TREATMENT OF TITANIUM PARTS K-105 REV B, PHOSPHATE FLUORIDE SURFACE PREP OF TITANIUM R-103 REV B, CHEMICAL MILLING OF TITANIUM K-106 REV B, CLEANING TITANIUM PARTS BEFORE THERMAL PROCESSI K-109 REV B, CLEANING TITANIUM BEFORE WELDING R-109 REV B, APPLYING HEAT TREAT PROTECTIVE COATINGS T-119 REV B, TENSION TESTING OF WROUGHT METALLIC MATERIALS J-304 REV B, FUSION WELDING TITANIUM ALLOYS R-304 REV B, STRAIGHTENING TITANIUM FORGINGS AND EXTRUSIONS K-129 REV D, ALKALINE DEGREASING K-107 REV B, DESCALING TITANIUM K-104 REV B, CLEANING TITANIUM BEFORE CHEMICAL SURFACE TREAT R-329 REV C, SUPERPLASTIC FORMING OF TITANIUM K-103 REV D, CLEANING TITANIUM BEFORE ADHES BOND OR FINISH PS23600 REV BB, AGE/SHELF LIFE CONTROL REQUIREMENTS SUPPLEM PS13336 REV K, PREPARATION AND APP OF SILK SCREEN ENAMEL PS13693 REV T,APP OF CORROSIION-RESISTANT OR LGHTWEIGHT ELAS PS13517.1 REV L, FINAL PAINT OF T-45 AIRCRAFT MMS5031 REV E, RESIN FOR RESIN TRANSFER MOLDING PS11104 REV L, BONDING, THERMAL INSULATION; FOR HARPOON CONT 299-947-551, CORE MATERIAL, NONMETALLIC HONEYCOMB PS14014 REV F, FORMING FERROUS ALLOYS PS14268 REV AA, CARBON FIBER REINFORCED TOUGHENED EPOXY PB4-989 REV B AMD TO PS14268 REV AA, CARBON FIBER REINDFORCE 170-001 REV AV, SUPERSESSION ALTERNATE PARTS LIST STANDARDS INDEX LIST BPS4570 REV B, INSTALL OF ADHESIVE BONDED FASTENERS BPS4569, DRILLING OFHOLES IN METALLIC MATERIALS BPS4548, HIGH INTERFERENCE FIT BUSHING INSTALL BPS4428 REV A, CORROSION PROTECTIVE COATING, PAINT TYPE BPS4409 REV C, SHOT PEENING OF STEEL, ALUMINUM AND TITANIUM BPS4343 REV A, MECHANICAL CLEANING OF METALS BPS4326 REV A, VIBRATION AND BARREL FINISHING OF METALS BPS4316 REV D, ALUMINUM AND ALUMINUM ALLOY RIVETS PROCESSIN BPS4168 REV C, APP OF ALUMINUM FOIL ID PLATES BPS4163 REV J, AIRCRAFT CASTINGS BPS4139 REV P, HEAT TREATMENT OF ALUMINUM ALLOYS BPS4044 REV C, EMBRITTLEMENT AND STRESS RELIEF FOR PLATED PB2-375 REV B, AMD TO PS12050.1 REV AB, PICKLING ALUMINUM AL DPS4.707 REV BB PENETRANT INSP (FLUORESCENT) DPS4.707-1 REV L, PENETRANT INSPECTION - VISIBLE DYE MB1547 REV C, INK, INSPECTION SS9209 REV A, DRAWING INTERPRETATION MANUAL SC-206 REV E NONAERODYAMIC SURFACE SMOOTHNESS AND QUALITY CR SC-210 SEQ B04, AERODYNAMIC SMOOTHNESS RQMTS 6M284 REV A, TUBING END, ROTATIONAL MOLDING BEAD PS20014 REV J, USE OF TORQUE WRENCHES AND ADAPTORS PS13630 REV AE, PAINTING OF F/A-18 AND AV-8 AIRCRAFT MB1727 REV A, ABRASIVE BRUSHES FOR ELECTRICAL BONDING AND GR Issued Date 11/28/2012 11/28/2012 11/21/2012 11/21/2012 11/21/2012 11/9/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/7/2012 11/6/2012 11/6/2012 11/6/2012 11/6/2012 11/6/2012 11/6/2012 10/31/2012 10/31/2012 10/25/2012 10/25/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/23/2012 10/22/2012 10/19/2012 10/19/2012 10/18/2012 10/18/2012 10/18/2012 10/18/2012 10/18/2012 10/18/2012 10/18/2012 10/18/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBL-000185 A PSBL-000181 A PSBO-000771 C PSF22-001480 B PSF22-000264 D PSBO-000195 B PSBO-001398 C PSBL-000180 A PSBL-000175 A PSBL-000176 A PSBL-000179 A PSBL-000178 A PSBO-003174 A PSBO-003173 A PSBO-003172 A PSBO-003171 A PSBO-003170 A PSBL-000177 A PSBO-000090 B PSF35-000017 D PSBO-000164 D PSBO-000685 E PSBO-002841 D PSBO-001590 B PSBO-000210 I PSBO-000098 B PSBO-000967 C PSBO-001412 C PSBO-000389 B PSBO-003169 A PSF22-000809 B PSF22-001556 B PSSA-000045 C PSSA-000502 B PSSA-000315 E PSF35-000223 B PSBO-000016 M PSBO-000357 C PSBO-001559 B PSBO-001577 B PSBO-003068 C PSBO-001605 C PSBO-001561 B PSBO-000528 C PSBO-000358 C PSBL-000174 A PSBO-003167 A PSBO-000070 C PSSA-000506 A PSBO-002852 B PSBO-002187 B PSBO-000631 C PSBO-000523 E PSBO-000099 C GPS-TEST-0006 CA Title MB1842 ABRASIVE WHEEL MB1001 REV V, ZINC CHROMATE PRIMER MMS809 ADD1 REV L APPROVED MMS809 MATERIAL SOURCES LMA-MB017C, ADHESIVE COATED CU MESH FOR LIGHTNING STRIKER PR LMA-D0006D, ENG MATERIALS AND APPROVED PRODUCTS PS19005 REV E - INSTALLATION OF INSERTS IN SANDWICH AND OPEN 7M1265 REV D, RESTRICTOR, FLUID FLOW-BLANK UNION, FLARED 901-432-010 REV D, AERODYNAMIC SMOOTHNESS REQMTS MB1960 REV A, PRESATURATED WIPES AND CANISTERS MB1977, WATER-BASED MOLD TOOL CLEANER MB1224 REV K, RELEASE AGENT FOR BONDING MOLDS AND FIXTURES MB1466 REV C, TAPE, PRESSURE SENSITIVE POLYURETHANE FILM STF1514 REV E, FINISH INSTRUCTION STF1511 REV F, FINISH INSTRUCTION STF1504 REV B, FINISH INSTRUCTION STF1502 REV B, FINISH INSTRUCTION STF1002 REF F, FINISH INSTRUCTION MB1794, EPOXY, DEVCON 5-MINUTE PS14134 REV G - EDGE FILLING AND POTTING OF ASSEMBLIES LMA-PK004F, INSTALLATION PROCEDURE FOR BONDED NUTPLATES PS15761 REV L - STRESS RELIEF PROCEDURE -TITANIUM ALLOYS (D PS14085 REV K APPLICATION OF VIBRATION AND SOUND DAMPING TAP 5M3192 C, CABLE, ETHERNET, TWISTED SHIELDED PAIR 3M1296 REV C, NUT-DRILLED, JAM COARSE THREADS PS19402 REV AN, HOLE PREPARATION - FEEDS AND SPEEDS PS14214 REV J, FAB', PROCUREMENT ACCEPTANCE OF HEAT & CORR 5M3155 REV E, CONNECTOR, ELECTRICAL, CIRCULAR, THREADED PLUG PS17020 REV Y FUEL CELLS, BLADDER TYPE; INSTALLATION OF MMS5031 ADDENDUM 1 REV C - APPROVED MMS 5031 MATERIAL SOURCE 1MA160 REV AM, ALUMINUM ALLOY T-SECTION -EXTRUDED 5PTPAL03-E-A02, FORMING AND PRESSURE TESTING OF NONSTRUCTURA 5PTPTL30-A, RESTORATION OF COATING FOR F22 INLET DUCT SS8442 REV 4, VAPOR BLASTING SS5307 REV 10, BOLT HEX HEAD, STRUCTURAL SIX LOBE RECESS SS9201 REV 7, FASTENER INSTALL AND ACCEPT CRITERIA LMA-PC002B, RQMTS FOR EDDY CURRENT INSPECTION PS11205.2 REV AF, FAB OF CONDUCTIVE, FORM-IN-PLACE DO MMS1439 ADDENDUM 1 REV J - APPROVED MMS 1439 MATERIAL SOURCE MMS149 ADDENDUM 1 REV K, BOEING MATERIAL SPECIFICATION MMS1420 ADDENDUM 1 REV R, APPROVED MMS 1420 MATERIAL SOURCES PS14111 REV R SUP 1 FA 18, MACHINING AND DRILLING COMPOSITES 7M1267 REV C, HOSE ASSEMBLY, FLANGED, TEFLON, LOW PRESSURE MMS1432 ADD 1 REV K, BOEING MATERIAL SPECIFICATION PS13500 REV P, APPLICATION OF EROSION RESISTANT COATINGS MMS307 REV H, HEAT AND CORROSION RESISTANT STRUCTURAL ADHES BPS4467 REV C, HARDNESS TESTING AND REQUIREMENTS OF METALS PS11020 REV AB PSD GKN REV 1 PS13656 REV T, APPLICATION OF MMS 417 CONDUCTIVE COATING SS5059 ROSAN SLIMSERT INSERTS 7M910 REV E, ELBOW-THICK BULKHEAD ST5M1383 REV F, TERMINAL, LUG, CRIMP STYLE, UNINSULATED BAC5730 REV R, SHOT PEENING PS17146 REV R CONNECTORS, FLUID SYSTEM, INTERNALLY SWAGED BE PS14223 REV V, FABRICATION, PROCUREMENT AND ACCEPTANCE OF C HARDNESS & CONDUCTIVITY VERIFICATION LOG SURVEILLANCE Issued Date 10/18/2012 10/4/2012 10/4/2012 10/4/2012 10/4/2012 10/2/2012 10/2/2012 9/13/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 9/11/2012 8/29/2012 8/29/2012 8/29/2012 8/29/2012 8/29/2012 8/29/2012 8/29/2012 8/24/2012 8/24/2012 8/24/2012 8/24/2012 8/16/2012 8/7/2012 8/7/2012 8/7/2012 8/7/2012 8/7/2012 8/7/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/2/2012 8/1/2012 7/30/2012 7/24/2012 7/24/2012 7/24/2012 7/24/2012 7/24/2012 7/24/2012 7/24/2012 7/20/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. GPS-TEST-0006 BA PSBO-001574 D PSBO-001677 C PSBL-000173 A PSF22-000150 N PSF22-000151 G PSSA-000505 A PSBO-001453 C PSBO-001926 D PSBL-000047 C PSNG-000012 F PSNG-000052 G PSNG-000002 C PSBO-000483 D PSBO-001745 B PSBO-001784 C PSBO-001951 D PSSA-000494 B PSSA-000504 A PSPW-000059 A GPS-CLEN-0006 C PSBL-000172 A PSBL-000171 A PSF35-000333 A PSBO-003163 A PSBO-003164 A PSBO-003162 A PSBO-000663 B PSBO-003161 A PSBO-002513 C PSBO-001066 B PSBO-001786 B PSF35-000101 H PSF35-000326 F PSSA-000501 A PSBL-000170 A PSBO-003156 A PSBO-003158 A PSBO-003157 A PSBO-003154 A PSBO-002646 B PSBO-000012 G PSBO-000664 C PSBO-001897 B PSBO-001395 B PSBL-000167 A PSBL-000169 A PSBL-000168 A PSBO-003149 A PSBO-003150 A PSBO-000450 B PSBL-000164 A PSBL-000165 A PSBL-000166 A PSBO-003144 A Title HARDNESS TEST BLOCK SURVEILLANCE 9M702 REV AG, CLAMP, BLOCK - TUBE SUPPORT, PLASTIC DPS1.05-3 REV AV, HARDNESS VALUES FOR ALLUMINUM ALLOYS BPS4592, IUID MARKING AIRCRAFT PARTS 5PTPTL24-M-V02, APP OF SHEET MATERIAL, MOLDED PARTS, AND BOO 5PTPTL25-G-V01, APPLICATION OF COVERSTRIPS SS8557, WATER REDUCIBLE EPOXY AIRCRAFT COATING, RQMTS FOR 5M333 REV AJ, SWITCH-TOGGLE, MAGNETIC HOLD-IN, SINGLE POLE, PS17140.1 REV W, CONNECTOR, ELECTRICAL, RADIO FREQ, AIRCRAFT 90-067 REV J, LATCH ASSEMBLY, TRIGGER ACTION, CHANNEL, 10-LB PS11217 REV BB, SEALING METHODS, AIRCRAFT MCS5900 REV Y,CONSUMABLE MATERIAL SPEC FOR COMP FAB AND BOND MMS332 ADDENDUM 1 REV K MATERIAL SOURCES PS22162 REV U AUTOMATIC GAS TUNSTEN WELDING OF TUBLAR JOINTS MMS5067 ADD 1 REV A, APPROVED MMS 5067 MATERIAL SOURCES MMS5068 ADD 1 REV B, APPROVED MMS5068 MATERIAL SOURCES SRP 1001 (P) - TAPERED METAL REPAIR STOCK 06000-700-003 REV 1, FINISH SPEC FOR THE CH-53K HELICOPTER SS8708 REV 1, TITANIUM PARTS, MACHINING OF PWA36456 REV E, FABRIC, WOVEN CARBON FIBER CLEANING, AQUEOUS IMMERSION DEGREASING 299-947-090 REV AE, PLASTIC SHEET, ACRYLIC HEAT RESISTANT MB1870 REV A, ADHESION PROMOTER FOR POLYSULFIDE SEALANTS 2ZZP00008B AMD 1, MARKING SPECIFICATION FOR JSF AIRCRAFT 9D0190 REV A, STRAP, WEBBING - HAND GRIP 9D0204, D-RING HANDLE ASSEMBLY. PS13234 REV G, COATING, FIRE BARRIER, MMS 455 APP OF 1MA100 REV AG, ALUMINUM ALLOY ANGLE-EXTRUDED PS23041 REV V SUPP 1 F-15 ST5M1418 REV K, CAP, PROTECTIVE, ELECTRICAL CONNECTOR 5M2938 REV N, JUMPER ASSEMBLY, ELECTRIC, RF BONDING 3M1273 REV D, BOLT - PAN HEAD, GEAR DRIVE, TITANIUM LMA-QT009P, LM AERO QUALIFIED PROCESSORS LIST FOR LMA-PT009 LMA-QT008H, LM AERO QPL FOR LMA-PT008 SS9451 REV 1, TACIFIER FOR FAB OF STRUCTURAL COMP BPS4407 REV H, PREPARATION AND APPLICATION OF SEALANTS BMS5-137 REV L, STRUCT ADHESIVE FOR ACOUSTIC PANELS BMS8-139 REV N, GLASS FABRIC PREIMPREG HIGH TEMP RESIS EPOXY BMS5-137 REV L QPL ORG BMS8-124 REV AB, NONMETALLIC HONEYCOMB CORE MMS446 ADD 1 REV J, APPROVED MMS 446 MATERIAL SOURCES PS11020 REV AB, LIQUID SHIMMING OF F/A-18 AND C-17 AIRCRAFT 5M2022 REV AE, CABLE-RF, TWIN CONDUCTOR, 75 OHM 3M1325 REV C, BOLT, CLOSE TOLERANCE, SPLINE DRIVE, CRES 3M1279 REV C, FASTNER-BLIND, INTERNALLY THREADED; EXTERNAL MB1094 REV E, SULFURIC ACID, TECHNICAL MB1142 REV D, ALCOHOL, METHYL MB1095 REV C, SODIUM DICHROMATE, TECHNICAL BMS8-151 REV N, EPOXY PREIMPREGNATED GLASS FABRIC BMS8-151 REV N QPL ORG, EPOXY PREIMPREGNATED GLASS FABRIC MMS332 ADDENDUM 1 REV K - APPROVED MMS 332 MATERIAL SOURCES MB1041 REV G, NAPHTHA, ALIPHATIC MB1054 REV E, TOLUENE MB1279 REV E, ACETONE PS14148 REV U DEV 1 GKN, FAB AND APP OF FA 18 Issued Date 7/13/2012 7/9/2012 7/6/2012 6/29/2012 6/25/2012 6/25/2012 6/25/2012 6/21/2012 6/21/2012 6/18/2012 6/18/2012 6/18/2012 6/18/2012 6/13/2012 6/13/2012 6/13/2012 6/12/2012 6/12/2012 6/12/2012 6/5/2012 6/5/2012 6/1/2012 5/30/2012 5/25/2012 5/18/2012 5/18/2012 5/17/2012 5/16/2012 5/16/2012 5/16/2012 5/9/2012 5/9/2012 5/9/2012 5/9/2012 5/8/2012 5/7/2012 5/7/2012 5/7/2012 5/7/2012 5/7/2012 5/3/2012 5/2/2012 5/2/2012 5/2/2012 5/2/2012 4/30/2012 4/30/2012 4/30/2012 4/25/2012 4/25/2012 4/24/2012 4/23/2012 4/23/2012 4/23/2012 4/19/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBA-000007 B PSBO-001418 B GMS-ADHE-0002 F PSSA-000500 A PSBO-003061 C PSBL-000163 A PSBA-000003 D PSBO-003140 A PSBO-003141 A PSBO-003143 A PSBO-003142 A PSF35-000123 B PSBO-000006 F PSBL-000160 A PSBL-000161 A PSUT-000003 B PSUT-000001 C PSPW-000003 D PSBL-000162 A PSF22-001320 B PSF35-000097 B PSNG-000029 D PSBL-000159 A PSNG-000413 A PSNG-000415 A PSNG-000417 A PSNG-000426 A PSNG-000425 A PSNG-000424 A PSNG-000423 A PSNG-000422 A PSNG-000421 A PSNG-000420 A PSNG-000419 A PSNG-000418 A PSNG-000430 A PSNG-000429 A PSNG-000428 A PSNG-000427 A PSNG-000416 A PSNG-000414 A PSNG-000412 A PSNG-000410 A PSNG-000411 A PSF22-001485 B PSNG-000401 A PSNG-000403 A PSSA-000062 C PSNG-000409 A PSNG-000408 A PSNG-000407 A PSNG-000406 A PSNG-000405 A PSNG-000404 A PSNG-000402 A Title BAL-QS-002 SUPPLIER QUALITY REQUIREMENTS PS17150.3 REV K, EQUIPTMENT TOOLING & PROCEDURES FOR CRIMPIN MATERIAL SPECIFICATION RTM6 EPOXY RESIN SS8813 REV 3 DEV 5, NONDESTRUCTIVE INSPECTION PLAN MMS901 ADD 1 REV J, APPROVED MMS901 MATERIAL SOURCES BPS4427 REV B, APPLICATION OF EPOXY ENAMEL BAE/AG/QC/SC1 PARTS 1 TO 7, BAE SYSTEMS AIRCRAFT BUSINESS ST7M389 REV D, SLEEVE, SEAL, COUPLER STF1742 REV E, FINISH INSTRUCTION STF1709 REV J, FINISH INSTRUCTION STF1706 REV N, FINISH INSTRUCTION LMA-ML018A, ADHE, TWO-PART, ROOM TEMP CURING, EPOXY FOR B PS11006 REV AA, CEMENTING OF SILICONE AND FLUOROSILICONE RUB MB1002 REV P, ALKALINE, ALUMINUM, CLEANER MB1282 REV A, MAGNESIUM CLEANER, ALKALINE ASQR-09.1 REV 6, FLIGHT SAFETY PARTS PROGRAM ASQR-01 REV 8, SUPPLIER QUALITY SYSTEM REQUIREMENTS ASQR-01 REV 8, SUPPLIER QUALITY SYSTEM REQUIREMENTS MB1527 REV A, CLEANER, EMULSION 5PTV4501 REV E, FILTER, CRYSTAL, BANDPASS PM-5010G, SUPPLIER/SELLAR SHIPPING INSTRUCTIONS PS13630 REV AD, PAINTING OF F/A- 18 AND AV-8 AIRCRAFT BPS4135 REV B.DIMPLING OF ALUM, MAG, STAIN STEEL AND TITAN GSS4310 REV K AMD 1, COATING, PRIMER, EPOXY, APP OF GSS15301 REV D, INSTALL OF HIGH STRENGTH THREADED BLIND GSS15302 REV E AMD 3, INSTALL OF SOLID AND TUBULAR RIVETS GSS15319, INSTALL OF INTERFERENCE FIT PULL TYPE, BLIND FASTE GSS15318, INSTALL OF ASP MECHANICAL LOCK FASTENERS GSS15317, INSTALL OF HIGH STRENGTH, INTERNALLY THREADED GSS15316 REV A, INSTALL OF HI-TIGUE TYPE INTERFER FIT FASTEN GSS15315 REV C AMD 1, DIMPLING, FLUSH HEAD MACHANICAL FASTEN GSS15309 REV A AMD 1, INSTALL OF HI-SHEAR RIVETS GSS15308 REV F, INSTALL OF LOCKBOLTS GSS15306 REV C, INSTALL OF HI-LOK TYPE FASTENERS GSS15304 REV G, INSTALL OF HIGH STRENG, PULL TYPE, BLIND FAS GT100A REV B, TAPE GASKETING, ASBESTOS GT23A REV T, TEST, NON-DESTRUCTIVE, PENETRANT METHOD OF INSP GSS26100 REV G, CHEMICAL MILLING OF ALUMINUM ALLOYS GSS22600 REV A, SPEC CANCELLATION NOTICE GSS15303 REV F AMD 2, INSTALL OF BLIND RIVETS GSS14105 REV F, APP OF HIGH-TEMP, FUEL RESISTANT SEALANTS GS179B REV Y, SHAPE, BULB, EXTRUDED, RUBBER GC110AK REV A, CLOTH, COATED GP111V REV P, PRIMER EPOXY POLYAMIDE, FAST DRY, MIL-P-23377 LMA-MB031 REV A, FABRIC, CARBON FIBER EPOXY PREPREG. GSS5300 REV F, FORMING AND STRAIGHTENING OF ALUM ALLOYS GSS9010 REV C SPECIFICATION CANCELLATION NOTICE SS8640 REV 19, ADHESIVE BONDING GENERAL PURPOSE NGSS4712 REV A, RQMTS FOR UNIQUE ID MARKING, OF FABRICATED GSS14100 REV D AMD 3, SEALING; PRESSURIZED AREAS, SKIN JOINT GSS11802 REV B, FABRICATION OF MONOLITHIC HEAT RESIST GSS11700 REV E, CAST PLASTIC SHIMS, RQMTS FOR FABRICATION OF GSS11300 REV D AMD 3, METALLIC AND NON-METALLIC HONEYCOMB GSS10400 REV D, SPECIFICATION CANCELLATION NOTICE GSS7012C-0, PREPARATION OF SURFACES BY ABRASIVE METHODS Issued Date 4/18/2012 4/18/2012 4/18/2012 4/18/2012 4/18/2012 4/18/2012 4/17/2012 4/16/2012 4/16/2012 4/16/2012 4/16/2012 4/12/2012 4/11/2012 4/10/2012 4/10/2012 4/10/2012 4/10/2012 4/10/2012 4/10/2012 4/10/2012 4/9/2012 4/9/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/5/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000398 PSNG-000145 PSNG-000154 PSNG-000397 PSNG-000396 PSNG-000104 PSBL-000157 PSNG-000391 PSNG-000390 PSNG-000389 PSNG-000385 PSNG-000384 PSNG-000382 PSNG-000381 PSNG-000380 PSNG-000379 PSNG-000378 PSNG-000377 PSNG-000376 PSNG-000375 PSNG-000374 PSNG-000095 PSBL-000158 PSBO-003109 PSNG-000150 PSNG-000151 PSNG-000354 PSNG-000357 PSNG-000359 PSNG-000371 PSNG-000370 PSNG-000369 PSNG-000368 PSNG-000366 PSNG-000365 PSNG-000362 PSNG-000361 PSNG-000360 PSSA-000499 PSNG-000372 PSNG-000358 PSNG-000355 PSBO-000689 PSBO-001095 PSBO-002692 PSBL-000153 PSBL-000154 PSBL-000156 PSF35-000323 PSBL-000155 PSNG-000348 PSNG-000351 PSNG-000349 PSNG-000350 PSNG-000352 Rev. A B B A A B A A A A A A A A A A A A A A A B A B B B A A A A A A A A A A A A A A A A B B B A A A C A A A A A A Title GS182B REV C, SHAPE, CHANNEL EXTRUDED, SPECIAL GS500D REV J, SPACER GS182A REV CA, SHAPE, CHANNEL, EXTRUDED GS180A REV BG, SHAPE, ANGLE, EXTRUDED, EQUAL LEG AND THICKNE GS31AB REV AN8 AMD 8, SHOP PRACTICE, MANDATORY/OPTIONAL GS500G REV R, SPACER MB1845 REV A, ULTRASONIC ATTENUATION TAB MATERIAL GR110PF REV E, RESIN, SYNTACTIC COMPOUND, EPOXY, SELF-EXTING GP111AM REV F, PRIMER, CORROSION, INHIBIT, ADHE BONDING APPS GP110M REV H, INK, MARKING, ONE-PART GP110AD REV E, PAINT, INK, MARKING ONE-PART, RUBBER-STAMP GP100A REV N, PANEL, ALUMINUM SANDWICH, HONEYCOMB CORE GP13E REV C, PIN, HINGE RETENTION OF, MECH AND NON-MECH GN11AC REV AG, NAMEPLATES, PLACARDS, PANELS, DECALS AND GM4308B REV B, FILM ADHESIVE, STRUCTURAL, METAL AND THERMOSE GM4004 REV D, SHIM MATERIAL, CAST PLASTIC, EPOXY RESIN GL511C REV B, LATCH ASSEMBLY SPLASH PROOF, PUSH BUTTON GL503AB REV B1 AMD 1, LOCK ASSEMBLY GL105BH REV T, LUBRICANT, MOLD RELEASE AGENT, LIQUID GH11BA REV C, HOLE PREP, FASTENER SIZE AND ACCEPT CRITERIA GH11AL REV H, HOLE PREP-FASTENER GM4006B, FASTENER INSERT AND EDGE SEALING MATERIALS MB1700, ULTRASONIC CONTACT INSPECT COUPLANTS PS14191 REV N, FAB OF METAL NAMEPLATES AND PANELS AML4006 REV 23, APPROVED MATERIALS LIST AML4107 REV 16, APPROVED MATERIALS LIST AML4308 REV 8, APPROVED MATERIAL LIST AML4358 REV 2, APPROVED MATERIALS LIST GA100ABD REV B, ADHESIVE, EPOXY FILM TOUGHENED GF13D REV G, FLUSHNESS- FASTENER, COUNTERSUNK HEAD GF105M REV F, FLUID, GEL, METAL SURFACE TREATMENT GC130RJ REV H, COATING, POLYURETHANE, HIGH SOLIDS, PIGMENTED GC130R REV AA, COATING, POLYURETHANE GC130DL REV D, COATING, LACQUER, VINYL, FLAT, CLEAR GC130AE REV M, COATING, WALKWAY COMPOUND, NON-SLIP, GA100D REV P, ADHESIVE-SEALANT GA100B REV A, ADHESIVE GA100AJ REV E, ADHESIVE, CEMENT, RUBBER AND GASKET, SS9578 REV 14 AMD 2, CLOTH, GLASS, EPOXY RESIN PREIMPREGNATE GG15A REV E, GAPS, HEAD FASTENERS G120 REV P1, AMD 1, SHIM, ALUMINUM ALLOY, TAPERED IN THICK AML4309 REV 8, APPROVED MATERIALS LIST ST5M1371 REV T, CLAMP, CABLE, ELECTRICAL CONNECTOR-STR PS22800 REV U, SOFT SOLDERING OF ELECTRICAL AND TRECOT 30M-AS1895/7 REV B, AS1895/7, BOEING-ST. LOUIS SUPP MB1106 REV F, DRY BLASTING ABRASIVE MB1261 REV K, MASKING TAPE- HIGH TEMP METAL BOND MB1693 REV B, SILICONE RUBBER DAMMING TAPE LMA-QL025B, LM AERO QPL FOR LMA-PL025 MB1412 REV D, TEFLON TAPE F-185 SEQ D02, APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT 60S600 REV 9, SPACER, NUT PLATE F-185 SEQ D01, APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT F-185 REV C, APPLYING HIGH SOLIDS POLYURETHANE TOPCOAT STF0361 REV A, FINISH INSTRUCTION Issued Date 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/4/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/3/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 4/2/2012 3/28/2012 3/28/2012 3/28/2012 3/27/2012 3/27/2012 3/27/2012 3/27/2012 3/27/2012 3/23/2012 3/23/2012 3/23/2012 3/23/2012 3/23/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000353 PSBO-001244 PSBO-003133 PSBO-002429 PSBO-002228 PSBO-003134 PSBO-003137 PSF35-000013 PSBO-003139 PSBO-003135 PSBO-000055 PSBO-002864 PSBO-003130 PSBO-003132 PSBL-000054 PSBO-003125 PSNG-000347 PSBO-003126 PSBL-000122 PSBO-001349 PSBO-003040 PSBO-000298 PSNG-000341 PSNG-000343 PSNG-000345 PSNG-000346 PSNG-000344 PSNG-000342 PSBO-003124 PSBO-002923 PSF22-001548 PSNG-000340 PSBO-003123 PSBL-000152 PSNG-000330 PSNG-000339 PSF35-000055 PSNG-000333 PSNG-000338 PSNG-000335 PSNG-000332 PSSA-000498 PSBO-001540 PSBO-002169 PSBO-001749 PSBO-003117 PSBO-003120 PSNG-000327 PSBL-000150 PSBO-003114 PSBO-002190 PSBO-000775 PSNG-000288 PSNG-000297 PSNG-000300 Rev. A C A C B A A C A A I B A A B A A A B C B F A A A A A A A C B A A A B A B A A A A A C B B A A A A A B C A A A Title MP-292 REV F, PROCESSING OF ALUM FORGINGS IN THE T6XX COND BAC5749 REV V, ALKALINE CLEANING BAC5063 PSD6-90, BOLT AND NUT INSTALL IN COMP STRUCTURES BACB30MR REV BG, BOLT. BACE21CJ REV B, ELBOW, 90 DEGREE, FLARELESS TUBE BAC5063 PSD6-91, FASTENER INSTALL IN COMP STRUCTS BDS-300 D-01E BCA LMA-PL011C, FASTENER HOLES IN COMP AND METAL STRU BAC5875 PSD9-13, FAB OF ALUMINUM BAC5786 PSD6-66, SECH CLEANING OF ALUMINUM ALLOYS PS13375 REV AD, APPLICATION OF EPOXY PRIMER ST5M1372 REV F, LIGHT, INDICATOR BAC5701 PSD8-20, CADMIUM PLATING BAC5650 PSD8-1, HARDNESS TESTING 299-947-382 REV K, RECERT OF LIMITED SHELF LIFE AND CONTROLL BAC5777 PSD8-4, WASH PRIMER, APP OF QC-26 REV C, QUALITY ACCEPT CRIT FOR FORMED METAL PARTS D210-12080-1 PDD 8-68, BOEING HELI DOC MATERIALS QPS101 REV 68 D8-0127 REV E, MATERIAL SUBSTITUTIONS AND EQUIVALENTS D210-13764-1 REV A, 350 OUT OF AUTOCLAVE CURE EPOX PS21263 REV U, NONDESTRUCTIVE TESTING OF F/A-18 E/F COMPOSI STF0174, FINISH INSTRUCTION 10S500 REV D SHEET 20, AUTHORIZED PART SUBSTITUTIONS FP-87 REV B, SULFURIC ACID ANODIZING OF ALUM AND ALUM ALLOYS FP-162 REV B, TOPCOAT, HIGH SOLIDS FOR POLYURE MIL-C-85285 57B100 REV 22, BOLT, BLIND, FLUSH HEAD (SELF-LOCKING) 10S500 REV D, SHEET 1, AUTHORIZED PART SUBSTITUTIONS PS21263 REV U, SUPP 1 AIS, NDT OF F18 COMPS AND BONDED ASSEM PS21263 REV U SUPP 1 AAS, NONDESTRUCTIVE TESTING OF F/A-18 LMA-PL028 REV A, MANUFACTURE AND QUALITY CONTROL RAA3700E006D, PROTECT FINISH REQMTS FOR AIRCRAFT PS19262 REV F, INSERTS, SCREW THREAD, LOCKED IN BPS4089 REV M, FLUORESCENT PENETRANT INSPECTION 10Y201 REV 27, ACCEPTANCE STANDARD FOR MANUFACTURED PARTS 10Y204 REV 1, ACCEPTANCE STANDARD FOR SURFACE MISMATCHES LMA-MN040B, GENERAL PURPOSE SOLVENT FH-19 REV H, BEARINGS AND BUSHINGS QC-34 REV A, ENGINEERING ACCEPTANCE CRITERIA FOR MFG PARTS FH-114, COLD EXPANS OF HOLES IN ALUMI USING SPLIT MANDREL P-6975 REV B, F5 AND T38 FATIGUE CRIT PARTS PRESERVATION SS9170/681 REV 04 AMD 03, EMM, SOLVENT DAMPENED WIPER CLOTHS 30M-AS5174 REV C, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS33671 REV A, AS33671, BOEING ST. LOUIS SUPP FOR ST7M271 REV M, COUPLING, CLAMP - SHEET METAL FLANGE, SAFETY DMS2169 QPL ADHESIVE, MODIFIED EPOXY, ENVIRONMENTAL RESIST DPS1.960 C17-438, ADHESIVE BONDING OF COMP STRUCTURE P-200 REV E, PACKAGING IN ONE CARTON OR CORRUGATED BOX: BPS4020 REV L, PRESSURE TESTING PS13357 REV P, PREP AND APP OF SANDING SURFACER 4M313 REV G, BUSHING-SWAGE, CRES, FOR USE IN ALUMINUM, TITAN PS17110 REV AD, WIRING, ELECTRICAL; IDENTIFICATION OF C-17 REV J, CLEANING PRIOR TO INSPECTION FP-59 REV C, SULFURIC ACID ANODIC COATINGS FP-153, PRIMER MIL-P-85582, EPOXY, VOC COMPLIANT Issued Date 3/23/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/22/2012 3/21/2012 3/21/2012 3/21/2012 3/21/2012 3/20/2012 3/20/2012 3/20/2012 3/20/2012 3/20/2012 3/20/2012 3/20/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/19/2012 3/16/2012 3/16/2012 3/14/2012 3/13/2012 3/12/2012 3/12/2012 3/9/2012 3/9/2012 3/9/2012 3/9/2012 3/9/2012 3/9/2012 3/7/2012 3/7/2012 3/7/2012 3/2/2012 3/2/2012 3/2/2012 2/29/2012 2/29/2012 2/29/2012 2/29/2012 2/27/2012 2/27/2012 2/27/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000302 PSNG-000304 PSNG-000307 PSNG-000322 PSNG-000320 PSNG-000319 PSNG-000318 PSNG-000317 PSNG-000316 PSNG-000311 PSNG-000310 PSNG-000308 PSNG-000326 PSNG-000325 PSNG-000324 PSNG-000305 PSNG-000303 PSNG-000301 PSNG-000298 PSNG-000296 PSBL-000149 PSBL-000005 PSBL-000109 PSBL-000146 PSBL-000148 PSBL-000147 PSBL-000145 PSBL-000107 PSBO-002005 PSNG-000073 PSNG-000038 PSBO-003113 PSNG-000015 PSBO-000034 PSSA-000176 PSBL-000137 PSSA-000493 PSNG-000274 PSNG-000279 PSNG-000278 PSNG-000275 PSNG-000276 PSNG-000277 PSBL-000133 PSBL-000135 GPS-HEAT-0006 PSBL-000136 PSBL-000134 PSBO-003112 PSBO-000019 PSF22-000177 PSF22-000144 PSF22-000020 PSBO-002894 PSBO-000172 Rev. A A A A A A A A A A A A A A A A A A A A A B B A A A A B B C C A D G B A A A A A A A A A A D A A A Q E E B C E Title HT-19 REV C, HEAT TREAT OF PRECIP HARDENING CORROS RESIST ST IM-23 REV C, ID BY INK OR PAINT MARKING MA-82 REV C, STRAIGHTENING OF ALUMINUM AND MAGNESIUM CASTING STF0160, FINISH INSTRUCTION STF0118 REV B, FINISH INSTRUCTION STF0110 REV B, FINISH INSTRUCTION STF0103 REV B, FINISH INSTRUCTION STF0101 REV B, FINISH IINSTRUCTION NOR-QPL-1365, CUTTING FLUIDS, WATER EXTENDIBLE MA-116 REV D, MACHINING OF HIGH STRENGTH STEELS MA-106 REV B, SHOT PEENING OF ALUMINUM PARTS MA-84 REV E, STRAIGHTENING OF WROUGHT ALUMINUM ALLOYS STF0704, FINISH INSTRUCTION STF0325 REV A, FINISH INSTRUCTION STF0175, FINISH INSTRUCTION IT-60 REV E, PENETRANT INSPECTION HT-21 REV D, HEAT TREAT OF CARBON AND ALLOY STEELS HT-1 REV R, HEAT TREATMENT OF ALUMINUM ALLOYS FP-60 REV D, ANODIC COATINGS FOR MAGNESIUM ALLOYS FP-28 REV J, CHEMICAL CONVERSION COATINGS, COLORED, 299-947-370 REF F, FABRIC, 350?F-CURE, INTERMEDIATE-TOUGHENE BPS4383 REV F, APP OF LOW DENSITY INSERT MATERIAL MB1731 REF G, FLUOROPOLYMER RESIN PARTING FILM BPS4038 REV G, INSTALLATION OF HI-SHEAR RIVETS AND HI-LOK F BPS4472 INSTALLATION OF BLIND, HIGH STRENGTH STEEL FASTENER BPS4315 REV A. RIVETING PROCEDURE, FOR CHOBERT BLIND RIVETS BPS4036 REV D, RIVETS, BLIND, INSTALLATION PROCEDURE MB1679 REV H, FLUOROPOLYMER RESIN PARTING FILM SRP 4807 (J) DAMAGED/DISPLACED NUT ELEMENTS,WING SKIN REPAIR PS19110 REV U, FASTENERS, SOLID RIVETS; INSTALLATION OF PS19135 REV Y FASTENERS, JO-BOLT TYPE BLIND BOLTS, INSTALLAT DPS3.54 REV K, ID MARKING OF RAW STOCK METALS PS11345 REV R SEALING AND LEAK TESTING OF ADHESIVE BONDED HO PS12040 REV AC , CLEANING, ABRASIVE SS8888 REV 8, COMP COMPONENTS, GENERALPROCESS SPECIFICATION 30-277 REV G, COLLAR, WITH INTEGRAL WASHER, STAINLESS STEEL SS8689 REV 6, SEALANT, NON-CURING, CORROSION INHIBITING STF1004 REV H, FINISH INSTRUCTION STF1503 REV G, FINISH INSTRUCTION STF1039 REV F, FINISH INSTRUCTION STF1006 REV E, FINISH INSTRUCTION STF1007 REV D, FINISH INSTRUCTION STF1010 REV B, FINISH INSTRUCTION 100-140 REV H, PLATE ID AERO EQUIP/ ASSEM SERIAL AND PART NU BPS4367 REV B, ZINC CHROMATE PRIMER, APPLICATION OF BMI RESIN POST-CURE OVEN BPS4542 REV B, COLD EXPANDING OF FATIGUE CRITICAL HOLES IN BPS4528 REV A, ELECT BOND AND GROUNG OF AIRCRAFT STRUCT PS14018 REV P, FABRICATION OF METAL NAMEPLATES PS11217 REV BB , SEALING METHODS, AIRCRAFT 5PTPTL27-T PACKAGING CONFIG OF 5PTMKL16 BOOT KITS 5PTPNT01-G, MARKING OF PARTS AND ASSEMBLIES FOR ID AND 5PTMCT03-QPL-3 MATERIAL SPEC QUALIFIED PRODUCT LIST FOR MMS159 REV T, ALUMINUM ALLOY, PLATE (7075-T73 AND -T7351) PS16001.2 REV AF , MARKING OF FLUID LINES (EXPORT CONTROL) Issued Date 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/27/2012 2/24/2012 2/22/2012 2/22/2012 2/22/2012 2/22/2012 2/22/2012 2/22/2012 2/22/2012 2/21/2012 2/21/2012 2/21/2012 2/21/2012 2/21/2012 2/20/2012 2/16/2012 2/10/2012 2/10/2012 2/7/2012 2/7/2012 2/7/2012 2/7/2012 2/7/2012 2/7/2012 2/6/2012 2/6/2012 2/6/2012 2/6/2012 2/6/2012 2/2/2012 2/1/2012 2/1/2012 2/1/2012 2/1/2012 1/30/2012 1/19/2012 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000190 PSBL-000132 PSF22-000019 PSF22-000447 PSBO-003108 PSBO-003104 PSBO-003105 PSSA-000278 PSBL-000130 PSBO-001096 PSBO-000007 PSBO-001873 PSNG-000196 PSNG-000200 PSNG-000203 PSNG-000202 PSNG-000201 PSNG-000199 PSNG-000204 PSNG-000230 PSNG-000228 PSNG-000227 PSNG-000216 PSNG-000215 PSNG-000208 PSNG-000207 PSNG-000206 PSNG-000205 PSNG-000240 PSNG-000239 PSNG-000238 PSNG-000237 PSNG-000236 PSNG-000235 PSNG-000234 PSNG-000232 PSNG-000231 PSNG-000262 PSNG-000258 PSNG-000254 PSNG-000253 PSNG-000247 PSNG-000245 PSNG-000244 PSNG-000242 PSNG-000241 PSNG-000271 PSNG-000270 PSNG-000269 PSNG-000268 PSNG-000266 PSNG-000265 PSNG-000264 PSNG-000263 PSBO-001035 Rev. E A E B A A A C A C C C A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C Title PS18021 REV AC, LUBRICANTS, BONDED DRY FILM, APPLICATION OF BPS4012 REV D, ASSEMBLING THERMAL FITS 5PTMCT03-D-A02, MATERIAL SPEC FABRIC, S-2 GLASS FOR STRUCTU 5PTPJL37-F, APP OF 5PTMRL40 TEFLON FILLED COATINGS 1MA180 REV L, ALUMINUM ALLOY Z-SECTION - EXTRUDED BAC5423 PSD8-16 PENETRANT METHODS OF INSPECTION BAC5730 PSD8-19, SHOT PEENING SS8486 REV 14, CHEMICAL SURFACE TREATMENT OF ALUMINUM AND AL MB1272 REV U, CHEMICAL FILM MATERIAL FOR ALUMINUM DPS7.00-1-17 REV N, ALUMINUM HEAT TREAT PROCEDURES PS11007 REV N - CEMENTING OF NYLON MMS833 ADD 1 REV H D103 REV A, IMPRESSION AND RAISED MARKING IDENTIFICATION EAA8412-001 REV J F-143 SEQ C02, GENERAL RQMTS FOR APPLYING COATINGS F-143 SEQ C01, GENERAL RQMTS FOR APPLYING COATINGS EAA8412-003 REV D EAA1312-017 REV B APP J, AFT DECK ACOUSTIC DATA FOR REDESIGN F-143 SEQ C03, GENERAL RQMTS FOR APPLYING COATINGS K-138 REV B, CLEANING BEFORE INSPECTION K-135 SEQ G02, STRIPPING ORGANIC COATINGS K-135 SEQ G01, STRIPPING ORGANIC COATINGS K-108 REV B, CLEANING TITANIUM PARTS AFTER COLD FORMING K-108 SEQ B01, CLEANING TITANUM PARTS AFTER COLD FORMING F-143 SEQ D01, GENERAL RQMTS FOR APPLYING COATINGS F-143 REV C, GENERAL RQMTS FOR APPLYING COATINGS F-143 SEQ C05, GENERAL RQMTS FOR APPLYING COATINGS F-143 SEQ C04, GENERAL RQMTS FOR APPLYING COATINGS MS-424 SEQ C03, PRIMER COATING, EPOXY, VOC COMPLIANT MS-424 SEQ C02, PRIMER COATING, EPOXY, VOC COMPLIANT MS-424 SEQ C01, PRIMER COATING, EPOXY, VOC COMPLIANT MS-424 REV C, PRIMER COATING, EPOXY, VOC COMPLIANT MS-107 REV A, POWER FEEDER AND BATTERY WIRES K-142 SEQ B03, SOLVENT CLEANING K-142 SEQ B02, SOLVENT CLEANING K-138 SEQ C02, CLEANING BEFORE INSPECTION K-138 SEQ C01, CLEANING BEFORE INSPECTION R-316, THERMAL CUTTING OF TITANIUM QSM-00609, HOT FORMING LUBRICANT QSM-00060, CHEMICALLY NEUTRAL WRAPPING PAPER QSM-00055, DEIONIZED WATER PHST1011 REV A, TITANIUM AND TITANIUM ALLOYS RAW MATERIAL AN MS-519 SEQ F02, IMPACT RESISTANT EPOXY/WOVEN S-GLASS MS-519 SEQ F01, IMPACT RESISTANT EPOXY/WOVEN S-GLASS MS-424 SEQ CO5, PRIMER COATING, EPOXY, VOC COMPLIANT MS-424 SEQ C04, PRIMER COATING, EPOXY, VOC COMPLIANT T-117 SEQ B01, NONDESTRUCTIVE TESTING OF CASTINGS T-117 REV A, NONDESTRUCTIVE TESTING OF CASTINGS SC-301 SEQ B01, THERMAL EQMPT CONTROL SC-301 REV A, THERMAL EQPMT CONTROL SC-109 SEQ D04, RQMTS, SPRAY PAINTING FACILITIES AND AREAS SC-109 SEQ D03, RQMTS, SPRAY PAINTING FACILITIES AND AREAS SC-109 REV C, RQMTS, SPRAY PAINTING FACILITIES AND AREAS SC-108 REV A, CONTROL OF MACHINING AND FORMING FLUIDS 9M731 REV M BUTTON, PLUG - PLASTIC, RECTANGULAR Issued Date 1/19/2012 1/17/2012 1/17/2012 1/17/2012 1/13/2012 1/11/2012 1/11/2012 1/11/2012 1/10/2012 1/6/2012 1/4/2012 1/4/2012 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/23/2011 12/21/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000192 PSBO-002878 GPS-TEST-0005 PSBO-000534 PSBO-000535 PSBO-002195 PSBO-002311 PSBO-002563 PSNG-000180 PSNG-000179 PSNG-000162 PSBO-003103 PSBO-003102 PSBO-003101 PSBO-003100 PSBO-003099 PSBO-003096 PSNG-000191 PSNG-000190 PSNG-000188 PSNG-000187 PSNG-000184 PSNG-000183 PSBO-002593 PSBO-000864 PSBO-002220 PSBO-002457 PSBO-002458 PSBL-000127 PSBO-000522 PSBO-001470 PSBO-003090 PSBO-000482 PSBO-000359 PSF22-000295 PSSA-000100 PSBO-001389 PSF35-000008 PSBO-001968 PSBO-001910 PSBL-000026 PSBL-000059 PSBL-000126 PSNG-000023 PSF22-000366 PSBL-000105 PSBL-000063 PSBL-000066 PSBL-000062 PSBO-001950 PSBO-002639 PSBO-002842 PSBO-002017 PSBL-000125 PSSA-000276 Rev. A C C C C C B B A A A A A A A A A A A A A A A B C B B B A C B A D B D B B C B B B B A C B B B B B B D C B A E Title GSS4510 REV H, COATING, POLYURETHANE, APP OF 30M-AS25036 REV B, BOEING-ST. LOUIS SUPP WATER BREAK PROCEDURE BAC5300 REV M FORMING, STRAIGHTENING AND FITTING METAL PARTS BAC5306 REV J, MARKING OF PANELS AND DIRECT SILKSCREENING BACN13B REV E, NUT, SPACER PLATE, 90 DEGREE, MOLDED PEEK D33200-0 REV AB, TOOLING REFERENCE BMS8-317A QPL REV F SC-309 REV A, TRACEABILITY AND SERIALIZATION CONTROL SC-308 REV B, CONTROL OF FCT AND DURBILITY CRITICAL PARTS F-171 REV C, APP WATER-REDUCIBLE, CORROSION-INHIBITIVE PRIME BAC5001-4 PSD6-52, FLARELESS TUBE END FABRICATION DMS 2115 REV G, COATING, POLYURETHANE SRP6802 REV F, MISLOCATED FASTENER HOLES BAC5300-2 PSD8-2, METAL PART FORMING, STRAIGHTENING AND FITT BAC5001-5 PSD6-24, COUPLING FERRULE DUCT END FAB BAC5009 PSD6-154, BOLT AND NUT INSTALLATION TAF3121-001, MATERIAL TESTING RQMTS FOR TI-6A1-2SN-4ZR-2MO T-106 B01, RADIOGRAPHIC INSPECTION- GENERAL T-103 E02, PENETRANT INSPECTION T-103 E01, PENETRANT INSPECTION SC-313 REV A, PRODUCT QUALIFICATION FOR METALLIC MATERIALS SC-311 REV B, FORGING QUALIFICATION, SPECIAL RQMTS D33101-16 REV BA, ASSORTED PINS, CLAMPS, LOCATORS ADN ACCESS BAC5009 REV AA, BOLT AND NUT INSTALLATION BOEING PROCESS S BAC5348 REV G, PROCESSING OF REINFORCED THERMOPLASTIC LAMINA BMS11-9 REV F, METHYL PROPYL KETONE BMS11-9 REV F QPL ORG BPS4451 REV G, APPLICATION OF EPOXY PRIMER PS17009 REV V, OXY SYSTEMS; INSTALL AND TESTING OF BAC5861 REV E, APPLICATION OF PHOSPHATE-FLUORIDE COATING TO BAC5730 PSD8-18, SHOT PEENING DPS1.098 REV H, INSTAL OF RAIN EROSION AND IMPACT PROTECTION MMS307 ADDENDUM 1 REV C - APPROVED MMS 307 ADHESIVES AND SUP 5PTMUL08-B-A02 - LOW DENSITY GAP FILLER SS9641 REV 1, 350 DEGREES F CURING EPOXY IMPREGNATED PS17118 REV AF, WIRING, ELECTRICAL, SHIELDED AND BRAIDED, FA LMA-PC201E REQ FOR FLUORESCENT PENT INSP OF MET SRP 1405 (J) - COMP MAT REPAIR OF MINOR SURFACE DEFECTS 10M20 REV AJ, MISCELLANEOUS- MECHANICAL 299-947-091 REV T, SPEC FOR DESTRUCTIVE TESTING AND ACCEPT C 299-947-076 REV AL, DUAL-PURPOSE INTERMEDIATE-CURING (265) MB1159 REV N, INK METAL MARKING PS13201 REV AL, ANODIZING , ALUMINUM ALLOYS 5PTPCL01-B, MAGNETIC PARTICLE INSPECTION, REQUIREMENTS FOR MB1669 REV C, TEFLON COATED FABRIC TAPE 299-947-301 REV M, FABRIC WOVEN EPOXY RESIN-IMPREGNATED 299-947-392 REV C, FABRIC WOVEN 265F-CURE EPOXY 299-947-121 REV AF, ADHESIVE FILM AND PRIMER VARIABLE CURE S GEN 1111 (K) - STANDARD REPAIR PROCEDURES REFERENCE INFORMAT PB4-979 REV C, DEV TO PS14290 REV T, 5M3191 REV B, CABLE, ETHERNET, FOUR TWISTED SHIELDED PAIRS ST9M634 REV D, PLATE-IDENTIFICATION, AIRPLANE 901-947-002 REV E, FINISH SPEC FOR V 22 AIRCRAFT SS5100 REV 39, HOLE SIZES Issued Date 12/21/2011 12/21/2011 12/12/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/9/2011 12/8/2011 12/8/2011 12/8/2011 12/7/2011 12/7/2011 12/7/2011 12/7/2011 12/7/2011 11/30/2011 11/30/2011 11/30/2011 11/29/2011 11/29/2011 11/29/2011 11/29/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/28/2011 11/23/2011 11/23/2011 11/23/2011 11/23/2011 11/22/2011 11/22/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBL-000124 A PSF22-000464 B PSF22-001479 B PSBO-000332 B PSBO-001058 C PSBO-003087 A PSF35-000001 E PSF35-000069 B PSF35-000332 A PSF35-000331 A PSF35-000330 A PSF35-000329 A PSF35-000028 B PSF35-000010 C PSBO-001826 C PSBO-002165 E PSBL-000123 A GPS-CLEN-0008 B PSBO-000430 C GPS-TEST-0006 AA PSSA-000489 A PSF22-000775 B PSSA-000484 A PSBA-000005 B PSNG-000087 B PSNG-000018 C PSNG-000001 B PSBO-003084 A PSBO-003082 A PSBO-003081 A PSBO-002939 B PSBO-002595 B PSBO-002502 C PSBL-000118 A PSBL-000119 A PSBL-000120 A PSBO-001256 B PSBO-002202 D PSBO-002241 B PSBO-002278 D PSBO-002473 B PSBO-003077 A PSBO-003076 A PSBO-003073 A PSBO-003072 A PSBO-003071 A PSBO-003069 A PSBO-002928 B PSBO-002485 B PSBO-002426 C PSF22-001557 B PSF22-001433 B PSBO-003079 A PSBO-002277 C PSBO-002240 B Title BPS4555, THIN FILM SURFURIC ACID ANODIZE 5PTPKG19-A, PS FOR UNDERFILL OF BALL GRID ARRAY ASSEMBLIES LMA-MB016D, QUARTZ FABRIC, CYANATE ESTER IMPREGNATED PS24000 REV B, PROCESS CONTROL REQUIREMENTS 27M102 REV R, FITTINGS TUBE SEPARABLE DPS11.05 REV T, SURFURIC ACID ANODIZING 2ZZP00001 REV C, FINISH SPEC FOR JSF WEAPONS SYS 2ZZP00055 REV A, F-35 FLIGHT SCIENCE CRITICAL PARTS LMA-MA013, TAPE, CARBON FIBER EPOXY PREPREG LMA-QB028, QPL LMA-PR013, HIGH PERFORMANCE COAXIAL CABLE TESTING LMA-PL029, PROCESSING OF CARBON FIBER REINFORCED PEEK AND PE 2ZZP00009B/F35-02 INTEGRAL FUEL TANK SEALING 2ZZP00008B, MARKING SPEC FOR JSF AIRCRAFT ST5M1517 REV AN, SWITCH, PUSHBUTTON, ILLUMINATED MONETARY 5M3189 REV D, CABL, ELEC, 100 OHM SHIELDED QUAD 100 BASE-T E BPS4464 REV B, APP OF POLYURETHANE COATING CLEANING OF MEYER LAMINATOR FOR TACKIFIED CHANGEOVER PS14234 REV L, SUPERPLASTIC FORMING/DIFFUSION BONDING (SPF/ HARDNESS & CONDUCTIVITY PRACTICAL EXAM SS9622 REV 3 AMD 2, ORGANIC FIBER CLOTH EPOXY RESIN PREIMPRE 5PTMRL24-A-A01, HIGH TEMP EXTERIOR TOPCOAT SS8809 REV 2 AMD 3, INSPECTION, ULTRASONIC, NON-METALLICS, P SC1 PARTS 1-7 APPENDIX 4 ISSUE 2 DATED 10-18-2011 PS21313 REV L, COATING ADHESION TESTES PS12035 REV Y,CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESIVE MMS307 REV G, HEAT AND CORROSION RESISTANT STRUCTURAL ADHESI DPS1.04-15 REV M, PLASTIC LAMINATES, GENERAL PROCESSING BAC5423 PSD6-159, PENETRANT METHODS OF INSPECTION BAC5034-2 PSD6-30, TEMP PROTECT OF PRODUCT MATERIALS, PARTS BAC5613T QPL REV F BMS7-373A, QPL REV B BACC50AP REV L, COVER, SEAL, FASTENER, ANTI-SPARKING 299-947-077 REV G, PROCUREMENT SPEC FOR BRUSHES 299-947-092 REV E, PROCUREMENT SPEC FOR ACRYLIC ADHESIVE MB1827 REV B, WIPE SOLVENT, LOW VAPOR PRESSURE BAC5786 REV L, ETCH CLEANING OF ALUMINUM ALLOYS BMS5-28 AN QPL REV ORG BMS7-376C QPL REV ORG BMS13-60R, QPL REV B BACB30XN REV K, BOLT, HEX HEAD, 90 KSI SHEAR, SHORT THREAD BAC5605 PSD6-2, INSTALLATION OF TUBING INSULATION BSS7002 SSD9-486, STORAGE OF TIME AND TEMP SENSITIVE MATERIA BAC5001-5 PSD6-27, COUPLING FERRULE DUCT END FABRICATION BAC5001-5 PSD6-26, COUPLING FERRULE DUCT END FABRICATION BAC5001-5 PSD6-25, COUPLING FERRULE DUCT END FABRICATION BAC5355 PSD6-4, FABRICATION OF FLAME PROPAGATION RESIST AND BSS7061 REV B, REQMTS FOR TIM AND TEMP RECORDS USED W/TATS D33121-0 REV J, INDEX TO T CODED JOGGLE TOOLS BACC47EF REV U, CONTACT, ELECTIRCAL, PIN, LOW INSERTION FORC LMA-QL026A, LM AERO QUALIFIED PROCESSORS LIST LMA-D0018 QUALIFICATION REPORT FOR BRYTE CYANATE ESTER PREPR BAC5619 PSD6-53, HEAT TREATMENT OF CORROSION RESISTANT STEEL BMS13-60R, WIRE ELECTRIC, ARC RESISTANT BMS7-376 REV C, ALUMINUM-LITHIUM ALLOY 2099 PLATE Issued Date 11/18/2011 11/18/2011 11/18/2011 11/17/2011 11/17/2011 11/15/2011 11/10/2011 11/10/2011 11/10/2011 11/10/2011 11/10/2011 11/10/2011 11/10/2011 11/10/2011 11/9/2011 11/8/2011 11/7/2011 11/7/2011 10/19/2011 10/19/2011 10/19/2011 10/19/2011 10/19/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/18/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 10/17/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002201 PSBL-000121 PSF22-000287 PSBO-001427 PSSA-000061 PSBO-002732 PSBL-000117 PSBO-000054 PSF35-000204 PSBO-002186 PSBL-000068 PSBL-000070 PSBL-000071 PSBL-000073 PSBL-000075 PSBL-000077 PSBL-000079 PSBL-000082 PSBL-000101 PSBL-000100 PSBL-000099 PSBL-000097 PSBL-000096 PSBL-000095 PSBL-000094 PSBL-000093 PSBL-000092 PSBL-000116 PSBL-000115 PSBL-000114 PSBL-000113 PSBL-000112 PSBL-000111 PSBL-000110 PSBL-000108 PSBL-000104 PSBL-000103 PSNG-000160 PSNG-000159 PSBL-000091 PSBL-000090 PSBL-000089 PSBL-000088 PSBL-000087 PSBL-000086 PSBL-000085 PSBL-000083 PSBL-000081 PSBL-000078 PSBL-000076 PSBL-000074 PSBL-000072 PSBL-000058 PSBL-000060 PSBL-000061 Rev. B A C G B C A C B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title BMS5-28 REV AN, HONEYCOMB EDGE FILLING AND PLOTTING COMPOUND 299-947-110 REV K, PRESSURE SENSITIVE ADHESIVE TAPE LMA-M5004-E, TITANIUM ALLOY FORGINGS, DAMAGE TOLERANT G PB11-584 REV G ADV PROCESS INFO FOR PS21235.1 REV L, ENVIRO SS8622 REV 6, MULTIPLE PART PASTE ADHESIVES PB10-698 REV B, AMD TO PS20509 REV T 299-947-299 REV C, TEST METHODS PS13225.1 REV E, BRUSH ANODIZE REPAIR OF SCRATCHES AND BLEN LMA-PB010D, COUPLING INSTALL, BULKHEAD ST5M1344 REV AH, CONNECTOR, PLUG RECEPTACLE, ELECTRICAL MB1811, TEFLON TAPE; SKIVED WITH SILICONE ADHESIVE MB1043 REV E, TAPE FOR PACKAGING AND SEALING MB1065 REV R, CANCELLED-ADHESIVE, ACRYLIC PLASTIC MB1115 REV E, BARRIER MAT'L MB1171 REV G, RUBBER, HEAT RESISTING, BONDING BLANKET MB1191 REV A, PAPER, KRAFT, WRAPPING MB1194 REV J, FIBERGLASS FABRIC AND ROPE MB1207 REV V, SEALING COMPOUND-VACUUM BAG, EXTRUDED MB1576 REV B, LIQUID ADHESIVE WITH 35 % ADHESIVE SOLIDS MB1534 REV F, POLYESTER BREATHER FABRIC - 10 OZ MB1465 REV H, TAPE, PRESSURE SENSITIVE ADHESIVE MB1461 REV K, ADHESIVE FILM, STRUCTURAL MB1423 REV D, FIBERGLASS FABRIC, DRY-181 STYLE WEAVE MB1400 REV D, RELEASE FILM, PERFORATED (HALOHYDROCARBON) MB1391 REV F, TEFLON COATED FIBERGLASS RELEASE, FABRIC, MB1377 REV L, GLOVE, FOR USE WITH AGGRESSIVE TACK RESINS MB1361 REV T, PEEL PLY FABRIC - SYNTHETIC - NONBONDING MB1882, MOISTURE RESISTANT WRAPPING MATERIAL MB1814, TEFLON TAPE, EXTRUDED WITH NON-SILICONE ADHESIVE MB1813, TEFLON TAPE-ESTRUDED WITH SILICONE ADHESIVE MB1812, TEFLON TAPE - SKIVED WITH NON-SILICONE ADHESIVE MB1764 REV A, POLYESTER BREATHER FABRIC-HEAVY DUTY 10 OZ MB1754 REV A, WIPER MB1751 REV B, SOLVENT BLEND-NON PHOTO REACTIVE MB1697 REV C, RELEASE AGENTS-WATERBASE MB1644 REV B, WIPING CLOTH, CHESECLOTH SUBSTITUTE MB1636 REV B, SEALING COMPOUND-VACUUM BAG-EXTRUDED MMS348 SHIM, LIQUID, EPOXY MMS358 REV E ADD 1, APPROVED MMS 358 MATERIAL SOURCES MB1325 REV A, MOLDING COMPOUND, COTTON CORD REINFORCED MB1315 REV D, PLASTIC MATERIAL, LAMINATED THERMOSETTING MB1312 REV J, FILM - NYLON VACUUM BAG MB1291 REV D, ALCOHOL, ISOPROPYL (WIPE SOLVENT) MB1281 REV C, ABRASIVE PADS-NYLON WEB MB1259, REV D, HIGH TEMPERATURE PARTING FILM MB1249 REV G, CHEESECLOTH, BLEACHED MB1210, ROLLER BRUSH-SLEEVE TYPE-ADHESIVE PRIMING MB1204 REV E, BRUSH - ADHESIVE PRIMING MB1192 REV M, GLOVE, PALLBEARER MB1182 REV AF, LOW DENSITY INSERT MATERIAL MB1135 REV A, ALCOHOL, ETHYL, SPECIALLY DENATURED MB1114 REV D, FLEXIBLE BARRIER MAT'L, HEAT SEALABLE, 299-947-073 REV N, EPOXY RESIN THERMOSETTING 299-947-097 REV W LOW DENSITY INSERT MATERIAL 299-947-100 REV P, PROCUREMENT SPECIFICATION FOR EPOXY ADHES Issued Date 10/17/2011 10/17/2011 10/12/2011 10/11/2011 10/11/2011 10/11/2011 10/10/2011 10/10/2011 10/10/2011 10/10/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/6/2011 10/5/2011 10/5/2011 10/5/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBL-000067 PSBL-000065 PSBL-000064 PSBL-000057 PSBL-000052 PSBO-000240 PSBL-000056 PSBO-002863 PSBL-000053 PSBL-000055 PSBO-003064 PSF22-000076 PSBO-002158 PSF35-000137 PSF22-000537 PSBO-003060 PSBO-000322 PSBL-000049 PSBL-000043 PSBL-000044 PSF22-001551 PSBL-000046 PSBL-000048 PSBL-000045 PSBO-001874 PSBO-000051 PSBO-002778 PSF22-000436 PSSA-000476 PSBL-000028 PSBL-000030 PSBO-003059 PSF35-000198 PSF35-000216 PSBO-002203 PSBO-003046 PSBO-003045 PSNG-000146 PSSA-000068 PSNG-000134 PSBO-003047 PSBL-000024 PSNG-000040 PSBO-001953 PSBL-000025 PSBL-000006 PSBL-000023 PSBL-000022 PSBL-000018 PSBL-000014 PSBL-000013 PSBL-000011 PSBL-000010 PSBL-000008 PSBO-000136 Rev. A A A A A C A B A A A D B B B A E A A A B A A A C E C B A A A A B C C A A A C A A A C C A A A A A A A A A A B Title BPS4492 REV B, FLUOROSCOPIC RADIOGRAPHIC INSPECTION 299-947-377 REV L, FILM SURFACE 299-947-303 REV F, TAPRE UNDIRECT 265 DEG CURE EPOXY BPS4416 REV C,CALIBRATION AND CERT OF THER PROCESSING EQUIP 299-947-113 REV D, PRESSURE SENSITIVE POLYURETHANE FILM TAPE PS20700.6 REV H - ASSEMBLY SHOP PRACTICE, OVERSIZE FASTENER 299-947-600 REV B, GENERAL REQUIREMENTS PS17130.2 REV V, CONNECTORS 299-947-359 REV A, ROOM TEMP CURE STRUCTURAL EPOXY ADHESIVE 299-947-399 REV A, ADHESIVE MATERIALS PS14002 REV P, CABLE ASSEMBLIES, SWAGED TERMINAL 5PTPTT09-B-A03 COMPOSITES MATERIALS, BATCH ACCEPTANCE TEST 5M3017 REV C, LIGHT, INDICATOR, NVIS COMPATIBLE LMA-ML400E, ADHESIVE, CYANATE ESTER, 350 F CURE, FOR 300 F S 5PD00020F, CONFIGURATION MANAGEMENT REQUIREMENTS DOC MMS 1420 REV G, ALUMINUM ALLOY PLATE, 7050-T7451 PS22210 REV L - ARC FUSION WELDING (EXPORT CONTROL) BPS4001 REV O, CHROMIC ACID ANODIZING BPS4212 REV C, HEAT TREAT OF TITANIUM ALLOYS BPS4496 BASIC, ION VAPOR DEPOSITION OF ALUMINUM 5PD42866A F22 MID FUSELAGE STRUCTURES RETROFIT PROGRAM 21-003 TO 024 REV AB, BUSHING, PRESS FIT 120-229 REV K, STANDOFF, POST, LOCKING THREAD, ADHESIVE BOND BPS4497 REV C. APPLICATION OF BODY AND PINHOLE FILLERS ST3M454 REV AG, SCREW-CLOSE TOLERANCE, 100 DEG CSUNK, HI-TOR PS13201 REV AL - ANODIZING, ALUMINUM ALLOYS PB9-320 REV B, DEV TO PS19402 REV AM 5PTPJL06-A, APP OF CORROSION PREVENTIVE COMPOUNDS SS7101 REV 11, CUTOUT ELECTRICAL CONNECTOR 20-005 TO 024 REV W, BUSHING, FLANGED, PRESS FIT 100-245 REF F, PLATE, ID, AERONAUTICAL EQPMT, IUID, LASER-ET BSS7341, PARTTOOL THERMAL PROFILING PROCEDURE LMA-PB002E, TUBE AND HOSE INSTALL LMA-PB039F, INSULATION OF FLUID LINES BAC5001-6 REV J, INSTALL OF TUBE FITTINGS; LUBRICATION AND T BAC5019 PSD6-166, CHROMIC ACID ANODIZING BAC5004-1 PSD6-68, SOLID RIVET INSTALLATION GS501A REV T, SPACER SS8752 REV 11, PREPARATION OF SURFACES FOR ADHESIVE BONDING GM4311A, ADHESIVE, HIGH PEEL STRENGTH BAC5730 PSD8-17, SHOT PEENING 299-947-075 REV F, PLASTIC SHEET MATERIAL, LAMINATED, THERMO PS20001 REV V, PROTECTION OF PARTS DURING FABRICATION AND TE SRP 1003 (P) - METAL ANGLE REPAIR STOCK 299-947-079 REV AA, EXPANDABLE UNSUPPORTED FILM ADHESIVE BPS4403 REV H, SECONDARY ADHESIVE BONDING 299-947-549, COMPRESSION MOLDING COMPOUND 299-947-385 REV F, FABRIC, 350 CURE BPS4518 REV B, PROCESSING RQMTS FOR 350 CURE SANDWICH COMP BPS4511 REV D, 350 CURE LAMINATE COMP STRUCTURES BPS4469 REV A, COMPRESSION MOLDING OF PLASTIC PARTS BPS4449 REV D, STRUCTURAL ADHESIVE BONDING SYSTEM BPS4446 REV C, COMPOSITE BONDING BPS4425 REV F, SPLICING HONEYCOMB CORE AND INSTALL OF INSER PS15500.7 REV B, HEAT TREATING OF ALUMINUM ALLOYS TO THE -T Issued Date 10/5/2011 10/5/2011 10/5/2011 10/4/2011 9/29/2011 9/29/2011 9/29/2011 9/29/2011 9/29/2011 9/29/2011 9/26/2011 9/15/2011 9/14/2011 9/14/2011 9/14/2011 9/14/2011 9/13/2011 9/7/2011 9/6/2011 9/6/2011 9/6/2011 9/6/2011 9/6/2011 9/6/2011 8/31/2011 8/26/2011 8/26/2011 8/25/2011 8/25/2011 8/24/2011 8/24/2011 8/24/2011 8/23/2011 8/23/2011 8/22/2011 8/22/2011 8/22/2011 8/22/2011 8/22/2011 8/22/2011 8/22/2011 8/20/2011 8/20/2011 8/20/2011 8/20/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 8/19/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-003043 A PSBO-000795 B PSBO-001431 B PSF35-000103 B GPS-CORR-0002 H PSBO-003029 A PSBO-003030 A PSBO-003035 A PSBO-003037 A PSBO-003039 A PSSA-000472 A PSF22-000398 B PSF22-000118 F PSBO-003038 A PSBO-003036 A PSBO-003031 A PSBO-003001 A PSBO-003006 A PSBO-003008 A PSBO-003010 A PSBO-003012 A PSBO-003021 A PSBO-003020 A PSBO-003019 A PSBO-003018 A PSBO-003017 A PSBO-003016 A PSBO-003015 A PSBO-003014 A PSBO-003013 A PSBO-003028 A PSBO-003027 A PSBO-003026 A PSBO-003025 A PSBO-003024 A PSBO-003023 A PSBO-003022 A PSBO-003011 A PSBO-003009 A PSBO-003007 A PSBO-003005 A PSBO-003002 A PSBO-003004 A PSBO-003003 A PSBO-001457 B PSF35-000320 B PSF35-000012 B PSBO-003000 A PSF35-000022 B PSBO-001767 B PSSA-000333 E PSF35-000222 C PSF22-001459 B PSF22-001462 B PSBO-000626 B Title DPS4.738-1 REV F, NONDESTRUCTIVE INSPECT ACCEPT CRITERIA PS19419.1 REV E, NUTPLATE, RIVETLESS; INSTALL OF FORCETECS PS21360 REV R, ELECTRICAL TESTING FOR AIRCRAFT HARNESS WIRIN LMA-PB030D, INSTALL OF POLYURETHANE AIR DUCT INSULATION APPLICATION OF PAINT COATINGS BAC5890 PSD6-1, ANODIZING OF TITANIUM FOR ADHESIVE BONDING BAC5890 PSD8-1, ANODIZING OF TITANIUM FOR ADHESIVE BONDING BAC5980 PSD8-3, NONDESTRUCTIVE INSPECT OF COMP PARTS BAC5980 PSD9-4, NONDESTRUCTIVE INSPECT OF COMP PARTS BAC5980 PSD9-13, NONDESTRUCTIVE INSPECT OF COMP PARTS SS8813 REV 3 DEV 4, NONDESTRUCTIVE INSPECTION PLAN 5PTPFL04-B, SEALING OF ALUMINUM PARTS TO COMPOSITE 5PTPFL02-J, ENVIRONMENTAL AND PRESSURE SEALING , FORWARD BAC5980 PSD9-11, NONDESTRUCTIVE INSPECT OF COMP PARTS BAC5980 PSD8-4, NONDESTRUCTIVE INSPECT OF COMP PARTS BAC5890 PSD9-1, ANODIZING OF TITANIUM FOR ADHESIVE BONDING BAC5317-1 REV F, CARBON AND ARAMID FIBER REINFORCED COMP PAR BAC5317-1 PSD9-2, CARBON AND ARAMID FIBER REINFORCED COMP PA BAC5317-2 PSD6-68, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 PSD6-72, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 PSD6-78, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-3 PSD8-5, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT PA BAC5317-3 PSD6-53, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT P BAC5317-3 PSD6-52, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT P BAC5317-3 PSD6-50, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT P BAC5317-3 REV F, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT PAR BAC5317-2 PSD8-12, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 PSD8-10, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 PSD8-9, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STRU BAC5317-2 PSD8-7, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STRU BAC5317-4 PSD9-7, ADVANCED COMPOSITE LAMINATE AND HONEYCOMB BAC5317-4 PSD6-53, ADVANCED COMPOSITE LAMINATE AND HONEYCOMB BAC5317-4 PSD6-46, ADVANCED COMPOSITE LAMINATE AND HONEYCOMB BAC5317-4 PSD6-24, ADVANCED COMPOSITE LAMINATE AND HONEYCOMB BAC5317-4 REV E, ADVANCED COMP LAMINATE AND HONEYCOMB SANDWH BAC5317-3 PSD9-4, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT PA BAC5317-3 PSD9-3, MFG OF HIGH TEMP RESISTANT EPOXY STRUCT PA BAC5317-2 PSD6-76, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 PSD6-71, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STR BAC5317-2 REV G, MFG OF LOW TEMP AUTOCLAVE CURED EPOXY STRUC BAC5317-1 PSD9-1, CARBON AND ARAMID FIBER REINFORCED COMP PA BAC5317-1 PSD6-48, CARBON AND ARAMID FIBER REINFORCED COMP P BAC5317-1 PSD8-6, CARBON AND ARAMID FIBER REINFORCED COMP PA BAC5317-1 PSD6-53, CARBON AND ARAMID FIBER REINFORCED COMP P DMS2485 REV H, RAIN EROSION AND IMPACT PROTECTION TAPE LMA-QH090A, LM AERO QPL FOR LMA-PH090 LMA-PG001B APR 6, 2004 REQ FOR ETCH/CLEANING PRIOR TO PENETR BAC5890 REV C, ANODIZING OF TITANIUM FOR ADHESIVE BONDING LMA-PC001B REQUIREMENTS FOR ULTRASONIC INSP OF BONDED AND C PS23007 REV T, ACCEPTANCE PROCEDURE FOR ALUMINUM ALLOY SS9999 REV CG, STATUS OF STANDARDS LMA-PB105C, PS FOR INSTALL OF HIGH TEMP LMA-M7008D, ALUMINUM ALLOY PLATE LMA-M7040C, ALUMINUM ALLOY PLATE BAC5435 REV W, BEARING INSTALLATION AND RETENTION Issued Date 8/16/2011 8/10/2011 8/10/2011 8/10/2011 8/9/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/5/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 8/3/2011 7/29/2011 7/29/2011 7/29/2011 7/29/2011 7/20/2011 7/19/2011 7/19/2011 7/19/2011 7/7/2011 7/7/2011 7/6/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002404 PSBO-002419 PSBO-002420 PSBO-000111 PSBO-002053 PSBO-000518 PSBO-001726 PSF22-001545 PSF22-000255 PSF22-000133 PSBO-000842 PSBO-002977 PSBO-002979 PSBO-002976 PSBO-001872 PSBO-002291 PSF35-000076 PSUT-000004 PSBO-002723 PSSA-000471 PSTS-000001 PSTS-000003 PSTS-000002 PSBO-002940 PSBO-002847 PSBO-002848 PSSA-000469 PSSA-000470 PSBO-002881 PSBO-001806 PSSA-000060 PSSA-000468 PSSA-000252 PSBO-000439 PSSA-000467 PSBO-001579 PSSA-000466 PSBO-000432 PSBO-002899 PSNG-000129 PSNG-000130 PSNG-000132 PSNG-000135 PSNG-000139 PSNG-000141 PSNG-000143 PSNG-000158 PSNG-000157 PSNG-000156 PSNG-000155 PSNG-000152 PSNG-000148 PSNG-000147 PSNG-000144 PSNG-000142 Rev. D B B C B B B B B G B A A A B C B B B A A A A A B B A A B B B A C D A B A B B A A A A A A A A A A A A A A A A Title BPS-N-70 SUP REV BT, NUT, SELF-LOCKING. BMS5-146 REV A, CARGO LINER JOINT SEALING TAPES BMS5-146, QPL REV A PS13144 REV H, PLATING, LOW EMBRITTLEMENT CADMIUM, ELECTRO MMS420 REV R , ALIPHATIC POLYURETHANE TOPCOAT PS14010.1 REV J, LINES, FLUID, TITANIUM: FABRICATION OF MMS327 ADD 1 REV K TO MMS 327 5PTMKL23A, LOW DENSITY EXTRUDED MATERIALS LMA-MD107A, BISMALEIMIDE FILM ADHESIVE 5PTPLL01-F-V02 F-22 CANOPY TRANSPARENCY AND CANOPY ASSEMBLY 30M-AS27641 REV B, SUPPLEMENT FOR AS27641 BAC5018 PSD6-56, INSTALLATION OF SAFETYING DEVICES BAC5004-1 PSD6-67, SOLID RIVET INSTALLATION BAC5018 PSD6-55, INSTALLATION OF SAFETYING DEVICES 7M1281 REV A, VALVE, CHECK-LINE MOUNTED BMS5-63 REV N QPL REV A LMA-PB004E FASTENER INSTALLATION, SOLID RIVETS, BLIND RIVETS ASQR-15.1 REV 2, HANDLING, STORAGE, PACKAGING, PRESERVATION 7M911 REV E, ELBOW-THICK BULKHEAD, 90 DEG SS8808 REV 1, TITANIUM PARTS TOOL SURFACE RELEASE TREATMENT MS100002 REV A, PART FAB USING MTM45-1 PREPREG SYSTEMS CORE PREPARATION AND FABRICATION DPS1.960 REV R, ADHESIVE BONDING OF COMP STRUCTURE 5M3141 REV B, CONNECTORS 5M3142 REV B, CONNECTORS, ELECTRICAL, RECEPTACLE SS8530 REV 8, COATING, WALKWAY, URETHANE BASE, PREP SS8530 REV 8 AMD 1, COATING, WALKWAY, URETHANE BASE, PREP 7M545 REV R, VALVE, INSERT CHECK - BIPETAL PS23054 REV B, FIRST ARTICAL ENGINEERING EXAMINATION (FAEE) SS8614 REV 4, PEEL PLY/BONDABLE SURFACE PRODUCING SS4007 REV 4, BUSHING CLOSE TOLERANCE SLIDE FIT SS9582 REV 7, FIBER LAMINATED PRODUCTS PS21211.1 REV F , ULTRASONIC INSPECTION OF WELDS SS9170/620 REV 2, EMM HIGH PERFORMANCE MASKING TAPE PS21267 REV G, NONDESTRUCTIVE EVALUATION OF ELECTRICALLY SEL SS9222 REV 3, GLASS HONEYCOMB CORE PS14334 REV F, REPAIR OF SPF AND SPF/DB PARTS PS13300 REV R, GENERAL PAINTING METHODS AND TECHNIQUES GC101F REV C, CORE MATERIAL GC101H REV F, CORE, HONEYCOMB, NON-METALLIC, GLASS REINFORCE GM4001C AMD 1, PREIMPREGNATED FIBERGLASS CLOTH GN11N REV G, NAMEPLATE ID AND MODIFICATION GS12D REV H, SHIM, LAMINATED GS179AP REV E, SHAPE, CHANNEL, EXTRUDED, RUBBER GS179BC REV A, SHAPE Y FLAT GSS22403A/0, CANCELLATION NOTICE GSS20300C-5, CANCELLATION NOTICE GSS16100G-1, ULTRASONIC QUALITY REQMTS FOR ALUMINUM ALLOY GS503A REV K, SPACER, GROMMET TYPE AML4311 REV 4, APPROVED MATERIALS LIST GM4309A, ADHESIVE, CORE SPLICE, STRUCTURAL G423 REV G, BUSHING GS183A REV CG, SHAPE, TEE GS179BB REV D, SHAYE, Y Issued Date 7/6/2011 7/6/2011 7/6/2011 6/30/2011 6/30/2011 6/30/2011 6/28/2011 6/28/2011 6/28/2011 6/28/2011 6/20/2011 6/20/2011 6/20/2011 6/20/2011 6/20/2011 6/20/2011 6/9/2011 6/6/2011 6/3/2011 5/24/2011 5/19/2011 5/19/2011 5/19/2011 5/9/2011 5/4/2011 5/4/2011 4/28/2011 4/28/2011 4/27/2011 4/20/2011 4/18/2011 4/18/2011 4/18/2011 4/13/2011 4/13/2011 4/13/2011 4/11/2011 4/6/2011 4/6/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/4/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000140 PSNG-000136 PSNG-000133 PSNG-000131 PSBO-001192 PSBO-002938 PSBO-002290 PSBO-002405 PSBO-002406 PSBO-000035 PSBO-000327 PSBO-000838 PSBO-002932 PSBO-002931 PSSA-000464 PSBO-002753 PSBO-000101 PSBO-002930 PSSA-000462 PSSA-000461 PSBO-002927 PSBO-000447 PSBO-002924 PSBO-002925 PSBO-002922 PSSA-000460 PSSA-000457 PSBO-002904 PSBO-002905 PSBO-002906 PSBO-002909 PSBO-002911 PSBO-002913 PSBO-002919 PSBO-002918 PSBO-002917 PSBO-002915 PSBO-002914 PSBO-002912 PSBO-002910 PSBO-002908 PSBO-002428 PSBO-002903 PSSA-000441 PSSA-000440 PSSA-000439 PSSA-000445 PSSA-000453 PSBO-002902 PSNG-000112 PSNG-000117 PSNG-000119 PSNG-000121 PSNG-000124 PSNG-000128 Rev. A A A A D A B B B C C B A A A B C A A A A B A A A A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A Title GS12E REV H, SHIM GN512A REV B, NUT GM4018B, FOAM, RIGID, FOAM-IN PLACE, POLYURETHANE TYPE GC101K REV E, CORE MATERIAL BAC5555 REV T PHOSPHORIC ACID ANODIZING OF ALUMINUM FOR STRU BAC5000 PSD6-235, SEALING, GENERAL BMS5-63 REV N, FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT BMS5-164 REV A, ADHESIVE, METHACRYLATE, FOR COMP REPAIR APPS BMS5-164 REV A QPL PS12045 REV M, CLEANING, LIQUID HONE PS22300.1 REV H, ELECTRON BEAM WELDING OF F-15 LOWER WING S 9M858 REV H, GROMMET - SPLIT, TEFLON, WIDE GRIP PS19180 SUP 2, COLD WORKING HOLES; SPLIT SLEEVE METHOD DMS1558 REV R, PLASTIC SHEET, GLASS FABRIC REINFORCED PHENOL SS8787 REV 3, STRIPPING OF ORGANIC MATERIALS 5M3194 REV A, SWITCH, TOGGLE- LEVER LOCK PS14240 REV R, CARBON/EPOXY, LAMINATES, FABRICATION AND ACC PS17601 REV C, ANNULAR GROOVED BEARINGS SS9513 REV 2, CARBON FIBER CLOTH, WOVEN SS9141 REV 5, LABELS, UID BAC5639 PSD6-15, APP OF ANTI-STATIC COATINGS PS14213 REV M, VACUUM FORMING OF F-15 TITANIUM WING SKINS PS12037 REV N DEV 1 - GKN, CLEANING OF TITANIUM DETAIL PARTS PS23029 REV J, TITANIUM FORGINGS, ACCEPTANCE AND TESTING PRO BAC5009 PSD9-66, BOLT AND NUT INSTALLATION SS9690 REV 02 AMD 1, NON-METALLIC DEVELOPMENT MATERIALS SS9622 REV 03 AMD 1, ORGANIC FIBER CLOTH BAC5657 PSD6-48, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-50, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-51, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-54, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-59, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-67, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5000 PSD6-234, SEALING, GENERAL BAC5946 PSD6-59, TEMPER INSPECT OF ALUMINUM ALLOYS BAC5725 PSD6-81, STRIPPING ORGANIC MATERIALS BAC5657 PSD6-69, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-68, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-65, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-57, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BAC5657 PSD6-53, MFG OF CARBON FIBER REINFORCED COMP STRUCTU BACB30NR REV AR, BOLT BAC5010 PSD6-168, APPLICATION OF ADHESIVES SS8620 REV 4 AMD 1, ADHESIVE SURFACING AGENTS SS8620 REV 4 DEV 2, ADHESIVE SURFACING AGENTS SS8609 REV 2 AMD 3, ADHESIVE BONDIN SS8669 REV 20 AMD 2, ADHESIVE BONDING SS8813 REV 3 DEV 3, NONDESTRUCTIVE INSPECTION PLAN D33200-2 REV Y, SELLER-OWNED TOOLING REQMTS GM4355 REV B, ADHESIVE, STRUCTURAL HEAT-RESISTANT GSS4710 REV F AMD 1, ID OF FABRICATED MET. PARTS AND ASSEMBL GSS7030 REV G, ALK CLEANING OF FERROUS AND NON FERROUS MATS GSS11120 REV A AMD 1, HONEYCOMB SANDWICH AND LOW PRESSURE LA GSS20100 REV A AMD 4, STRUCT. ADHESIVE BONDING FM-47 ADHES GT23G REV C, TEST, NON-DESTRUCTIVE, TAP BY MANUAL METHODS Issued Date 4/4/2011 4/4/2011 4/4/2011 4/4/2011 4/1/2011 4/1/2011 4/1/2011 3/31/2011 3/31/2011 3/30/2011 3/30/2011 3/30/2011 3/30/2011 3/29/2011 3/29/2011 3/23/2011 3/16/2011 3/16/2011 3/16/2011 3/15/2011 3/14/2011 3/10/2011 3/9/2011 3/9/2011 3/8/2011 3/8/2011 3/8/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/7/2011 3/4/2011 3/4/2011 3/4/2011 3/4/2011 3/4/2011 3/4/2011 3/4/2011 3/2/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSNG-000127 PSNG-000126 PSNG-000123 PSNG-000120 PSNG-000118 PSNG-000115 PSNG-000113 PSNG-000114 PSBO-002901 PSBO-000032 PSF35-000075 PSF35-000208 PSF35-000276 PSBO-002900 PSF22-001484 PSF35-000201 PSBO-002893 PSBO-002898 PSBO-002895 PSF22-001558 PSF22-001560 PSF22-001559 PSBO-002896 PSBO-002897 PSF22-001488 PSF35-000325 PSPW-000005 PSPW-000007 PSF35-000057 PSF22-001508 PSF35-000082 PSF35-000200 PSNG-000110 PSNG-000111 PSF35-000205 PSBO-000118 PSBO-000198 PSSA-000431 PSSA-000432 PSBO-001181 PSBO-002887 PSBO-002888 PSBO-002886 PSBO-002889 PSSA-000429 PSSA-000430 PSBO-002891 PSBO-002883 PSBO-002885 PSBO-002332 PSBO-002882 PSBO-002590 PSBO-002556 PSF35-000007 PSBO-000429 Rev. A A A A A A A A A C B B B A C B A A A A A A A A B B D E B B B B A A B C F A A B A A A A A A A A A B A B B E D Title GSS22650 REV C AMD 1, ADHESIVE BONDING OFMETAL AND NON-METAL GSS20360 AMD 4, STRUCTURAL ADHESIVE BONDING GSS20000 REV D, STRUCTURAL ADHESIVE BONDING (BASIC) GSS11100 REV G, GEN REQTS FOR THE FAB OF GLASS FIBER-BASE PL GSS7022 REV H, PREP OF SURFACES PRIOR TO STRUCT. ADHES. BOND GSS4301 REV K AMD 1, COATING, PRIMER, EPOXY, APPLICATION OF GM4358 REV B, ADHESIVE, STRUCTURAL, MODERATE PEEL GM4362A, ADHESIVE, STRUCTURAL 180 F SERVICE APPLICATION BSS7217 REV C, AIR CLEANLINESS, SHOP COMPRESSED AIR PS12035 REV Y, CLEANING OF ALUMINUM DETAIL PARTS FOR ADHESI LMA-PB001D, BOLT, SCREW, AND NUT INSTALLATION, GEN REQ LMA-PB020C, INSTALL OF STRUCTURAL PANEL FASTENERS LMA-PK013C, BONDING WTIH SILICONE ADHESIVES MMS149 REV M, ALUMINUM ALLOY 2124 PLATE LMA-MB030B, EPOXY PREPREG, GLASS REINFORCED LMA-PB006D, INSTALL PROCEDURE FOR SWAGED GROMMETS MMS601 REV L ARGON, WELDING, LIQUID AND GAS 11D0014 J-SHAPE, EXTRUDEDD MMS901 REV G NAMEPLATES, ALUMINUM FOIL, ADHESIVE BACKED FQML-5PTMLG74-1 5PTMFT02-A-A03 PRESSURE SENSITIVE ADH OVERLAMINATE POLY FILM 5PRMFT01-A-A02 PRESSURE SENSITIVE ADHESIVE POLYESTER FILM ID DMS 2177 REV J, ADHE SYSTEM - 250 DEG F SERVICE APPLICATION MMS423 REV D LOW VOC - LOW DENSITY EPOXY PRIMER LMA-MC003A, FABRIC, S-2 GLASS LMA-QT001B, LM AERO QPL FOR LMA-PT001 POP1614 REV BA SUPPLIER REQUIREMENTS FOR PRESERVATION AND S PWA11 REV CC HEAT TREATMENTS LMA-MU002A, POLYTHIOETHER FILLER LMA-ME002F, EXPANDED POLYTETRAFLUOROETHYLENE GASKET MATERIAL LMA-PB036B TORQUE REQ FOR INSTALL OF FASTENERS, AND OTHER AP LMA-PB005E, INSTALL PROCEDURE FOR CLAMPS PS21219 REV B, EDDY CURRENT INSPECTION, GENERAL PS12050.6 REV L, PICKLING TITANIUM AND TITANIUM ALLOYS LMA-PB013B, COUPLING INSTALL, FLEXIBLE PS15000.6 REV C, HARDENING ALLOY STEELS TO 200,000 PSI MINI PS19120 REV R, INSTALLATION OF PULL-THRU MECHANICALLY EXPAN SS5113 REV 0 AMD 2, BUSHING INSTALLATION, FOR SS5113 REV 0 AMD 3, BUSHING INSTALLATION, FOR 5M2975 REV D CONNECTOR TERMINATION, ELECTRICAL-COAX, TNC MAL PS17054 REV G, INSTALL OF BOND-ON STUDS PS17054.1 REV K, INSTALL OF BOND-ON STUDS PB1-419, DEV TO PS11217.6 REV E PS17054.2 REV A, INSTALL OF BOND-ON NUTPLATES SS5113, BUSHING INSTALLATION, FORCEMATE (FMCX) SS5113 REV 0 AMD 1, BUSHING INSTALLATION, FORCEMATE (FMCX) ST9M509 REV G, CLAMP, LOOP BAC5000 PSD6-229, SEALING, GENERAL BAC5000 PSD6-231, SEALING, GENERAL BAC5657 REV B, MANUFACTURE OF CARBON FIBER REINFORCED COMP S BAC5975 PSD9-12, FUSION WELDING OF METALS XBACN11BV REV A, NUT, ASSEMBLY, HEX, PAWL, CAPTIVE WASHER BDS-209 REV A, KIT DRAWINGS LMA-PC009K, HARDNESS AND CONDUCTIVITY TESTING, PS14231 REV M, SUPERPLASTIC FORMING/DIFFUSION BONDING (SPF/ Issued Date 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 3/1/2011 2/28/2011 2/25/2011 2/17/2011 2/17/2011 2/17/2011 2/16/2011 2/16/2011 2/15/2011 2/10/2011 2/10/2011 2/10/2011 2/10/2011 2/10/2011 2/10/2011 2/10/2011 2/10/2011 2/9/2011 2/4/2011 2/3/2011 2/3/2011 2/1/2011 1/27/2011 1/27/2011 1/27/2011 1/25/2011 1/25/2011 1/24/2011 1/20/2011 1/20/2011 1/13/2011 1/13/2011 1/12/2011 1/12/2011 1/12/2011 1/12/2011 1/12/2011 1/12/2011 1/12/2011 1/12/2011 1/10/2011 1/10/2011 1/7/2011 1/7/2011 1/7/2011 1/7/2011 1/5/2011 1/4/2011 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002880 PSSA-000427 PSBO-000167 PSBO-002877 PSBO-002879 PSNG-000020 PSNG-000026 PSNG-000034 PSNG-000041 PSNG-000046 PSNG-000045 PSNG-000022 PSBO-000770 PSBO-002874 PSSA-000425 PSSA-000424 PSNG-000109 PSNG-000108 PSNG-000107 PSNG-000106 PSNG-000105 PSNG-000103 PSNG-000101 PSNG-000100 PSNG-000099 PSNG-000098 PSNG-000097 PSNG-000096 PSNG-000093 PSNG-000092 PSNG-000090 PSNG-000088 PSF22-000788 PSBO-002875 PSBO-000829 PSBO-002870 PSBO-002871 PSBO-002872 PSBO-002873 PSBO-001940 PSBO-001958 PSBO-001964 PSBO-002008 PSBO-001998 PSBO-001982 PSBO-002868 PSBO-002869 PSF22-000516 PSBO-002866 PSBO-000428 PSBO-002862 PSF22-000523 PSBO-002865 PSF22-001546 PSF35-000321 Rev. A A B A A B D B B C C B C A A A A A A A A A A A A A A A A A A A B A D A A A A B B B B B B A A C A D A B A B B Title 23M111 REV U, PIN- RIVET, THREADED SS9170/504 REV 2, EMM RELEASE FABRIC, POROUS COATED CLASS 1 PS15807 REV L, STRESS RELIEF PROCEDURE - TITANIUM ALLOYS 30M-MS25036 REV A, BOEING-ST. LOUIS SUPP PS19017 REV M, FASTENERS, ADHESIVE BONDED PS12090 REV G, CANCEL AND SUPERSEDENCE NOTICE FOR P.S.12090 PS13318 REV P, PAINTING OF AEROSPACE GROUND EQUIP (AGE) PS15000.11 REV C HARDENING PH GRADE STAINLESS STELL TO THE H PS20006 REV R SHEET METAL AND EXTRUSIONS, REQS AND ACCEPT C PS21202 REV AP, PENETRANT INSPECTION PS21201 REV AC, MAGNETIC PARTICLE INSP PS13101 REV V, PLATING, CADMIUM ELECTRO MMS809 REV P, SLEEVING, INSULATION, IRRADIATED MODIFIED MMS261 REV H, TUBING SS9523 REV 5 AMD 2, FOAM, RIGID, POLY, POUR IN PLACE SS9523 REV 5 AMD 1, FOAM, RIGID, POLY, POUR IN PLACE GT105D REV Y, THREAD, NYLON GT100C REV F, TAPE GT100AS REV AC, TAPE GS503C REV E, SPACER GS500G AMD, REV N1, SPACER GS182BJ REV A, SHAPE, CHANNEL EXTRUDED, SPECIAL GR100B REV N, RUBBER, SYNTHETIC, SHEET GP105S REV B, PLASTIC FILM ADHESIVE BACKED GP105K REV L, PLASTIC, SPONGE RUBBER, MODIFIED VINYL GP105BG REV W, PLASTIC SHEET ABS, RIGID GN11A REV U, NAMEPLATE ID MODIFICATION GM4107D, SEALING COMPOUND GL510A REV E, LATCH ASSEMBLY FLUSH TRIGGER ACTION GL503AB REV B, LOCK ASSEMBLY GC100B REV U, CORE, HONEYCOMB G120 REV P, SHIM ALUMINUM ALLOY 5PTMUG01B, POLYTHIOETHER FILLER MMS261 ADD 1, APPROVED MMS 261 MATERIAL SOURCES MCS5901 REV A, CONSUMABLE MATERIAL SPEC ST9M506 REV C, PLATE ST5M1378 REV B, SLEEVE ST3M807 REV K, BOLT, HEX HEAD, CLOSE TOLERANCE 5M3175 REV A, CONNECTOR, PLUG, ELECTRICAL, COAXIAL SRP 8800 (W) - OVERSIZE HOLES FASTENERS SRP 1104 (L) - BUSHING REPAIR FOR HOLES IN COMPOSITES BONDED SRP 1111 (C) - GEN REPAIR OF ASSEM NONCONFORM SHEET METAL AN SRP 5800 (J) - OVERSIZE HOLES FASTENERS SRP 3800 (K) - OVERSIZE HOLES FASTENERS SRP 2800 (N) - OVERSIZE HOLESFASTENERS DPS4.40-2 REV J, NAMEPLATE FABRICATION DMS1745 REV A, ADHESIVE 5PTPTL17-U, INSTALLATION OF GAP FILLER PS23023 PERMDAC COMM, C-17 SUPP NO 8, PS14190 REV J, NAMEPLATES AND MARKERS, PLASTIC FILM, FABRIC PB1-418 AMD TO PS11344 REV U - SEALING METHODS 5PTPTL29-C, PROCESSING OF F22 INLET DUCT ASSEMBLY MISMATCH 5M2041 REV B, CONNECTOR-INSERT ELECTRICAL LMA-M9003A, TITANIUM POWDER, FOR PRE-ALLOYED 6AI-4V LMA-QL003C, LM AERO QPL FOR LMA-PL003 Issued Date 1/4/2011 1/4/2011 12/23/2010 12/23/2010 12/23/2010 12/21/2010 12/21/2010 12/21/2010 12/21/2010 12/21/2010 12/21/2010 12/21/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/16/2010 12/10/2010 12/8/2010 12/8/2010 12/8/2010 12/8/2010 12/7/2010 12/7/2010 12/7/2010 12/7/2010 12/7/2010 12/7/2010 12/6/2010 12/6/2010 12/6/2010 12/3/2010 12/1/2010 11/24/2010 11/24/2010 11/24/2010 11/23/2010 11/22/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-001480 B PSBO-001584 B PSBO-002226 B PSBO-002856 A PSBO-002861 A PSBO-002860 A PSBO-002858 A PSBO-001586 B PSBO-001587 B PSBO-001585 B PSBO-000108 B PSBO-002855 A PSBO-002719 B PSBO-002002 B PSF22-000275 B PSBO-000107 C PSF22-000461 B PSBO-002853 A PSBO-002759 B PSBO-002658 C PSBO-001880 B PSBO-001521 C PSBO-001504 C PSBO-000497 B PSBO-000418 C PSBO-001029 B PSF22-001555 A GPS-WELD-0004 A PSBO-000061 F PSBO-000062 G PSBO-000171 C PSBO-001810 B PSBO-002747 B PSF22-000647 B PSBO-002844 A GPS-WELD-0002 F GPS-WELD-0004 D GPS-WELD-0003 F PSF22-001553 A PSF22-001554 A PSBO-002793 B PSBO-002800 B PSBO-002839 A PSSA-000384 B PSSA-000293 B PSSA-000279 B PSSA-000275 B PSBO-002840 A PSF22-001524 B PSF22-001552 A PSF35-000191 B PSBO-002830 A PSBO-002833 A PSBO-002834 A PSBO-002835 A Title 4M116 REV U, WASHER- FLAT, NON-METALIC, SPECIAL ST3M758 REV AM, PIN-RIVET, THREADED, SHEAR, 100 DEG C'SUNK PS14278 REV C, FAB AND INSTALL OF FA 18 EF BOND ON WALKWAY C ST5M1243 REV AF, RELAY, ARMATURE ST7M214 REV J, ELBOW, TUBE 5M1692 REV Y, SWITCH 5M3136 REV C, COUPLER ST3M760 REV AJ, PIN, RIVET, THREADED-TENSION, 100 DEG C'SUNK ST3M761 REV AE, PIN, RIVET, THREADED, TENSION, PROTRUDING ST3M759 REV AM, PIN RIVET, THEADED, SHEAR, PROTRUDING HEAD PS14301.3 REV E, COMPOSITES, FABRICATION OF DMS 2224 PREPREG PS14301.2 REV G, COMPOSITES, FABRICATION OF, DMS 2288 PREPRE PS14211.2 REV F DEV 2 GKN, SUPERPLASTIC FORMING SRP 4800 REV M, OVERSIZED HOLES FASTENERS 5PTPJT24-A, SPRAY APPLICATION OF 5PTMRL07 TYPE D, FORM 1 PS14301 REV L, COMPOSITES, GENERAL REQUIREMENTS OF, C-17 AN 5PTPKG13B, BONDING WITH SILICONE ADHESIVES 1MA10718, ALUMINUM ALLOY SPECIAL SHAPED SECTION PB1-417 REV A, DEV TO PS11205.2 REV AD ST5M1312 REV U, SWITCH, PRESSURE-ABSOLUTE AND GUAGE ST3M507 REV W, BOLT-DOUBLE HEX HEAD, 0.0312 OVERSIZE, CRES 5M3179 REV B, CABLE, RADIO FREQUENCY, COAXIAL, 95 OHM ST3M453 REV AD, BOLT, CLOSE TOLERANCE - DOUBLE HEX HEAD, CRE PS22604 REV J, BRAZING: LOW CARB, LOW ALLOY OR AUSTENTIC ST ST3M497 REV V, BOLT - DOUBLE HEX HEAD, 0.0156 OVERSIZE, CRE PS14301.1 REV G, COMPOSITES, FAB OF DMS 2224 PREPREG LMA-M9005, TITANIUM SHEET AND STRIP GPS-WELD-0004, E B WELD CHAMBER CLEANING LOG PS13550.1 REV AE, COATING SYSTEM, EPOXY (FR), APPLICATION O PS13553 REV AG, IMPACT RESISTANT COATING SYSTEM PS16001.1 REV L, ELECTROETCH MARKING OF METAL PARTS AND ASM 3M943 REV AP, PIN - INDEX 5M3196 REV A, FUSE, CURRENT LIMITER 5PTMDG28C AMD 1, STRUCTURAL ADHESIVE, 250 CURE TEMPERATURE, DPS4.50-160 REV G, COATING, NONSKID- FLUID RESISTANT GENERAL PRODUCTION RESISTANCE WELDING GENERAL PRODUCTION ELECTRON BEAM WELDING GENERAL PRODUCTION TORCH BRAZING LMA-M9004, COMMERCIALLY PURE TITANIUM POWDER LMA-M9006, COMMERCIALLY PURE TITANIUM SHEET AND STRIP PB11-587 REV A, AMD TO PS21332 REV L 30M-AS5176 REV A, BOEING ST. LOUIS SUPP FOR 30M-MS35489, MS35489, BOEING ST. LOUIS SUPP FOR SS7000 REV 24, PLATE ASSEMBLY, MOUNT, CONSOLE TYPE, AIRCRAFT SS9170/501 REV 05, EMM RELEASE AGENTS, MOLD PREP CLASS SS8499 REV 03, ANODIZED AND CHEMICAL CONVERSION COATING ALUM SS2314 REV 03, SHIM STOCK, COMPOSITE 9M171 REV L, BEARING, BALL, CABLE END-SWAGING LMA-MF069A, WHITE ELECTRICAL HARNESS MARKING TAPE LMA-PF011, REPROCESSING OF FUEL TANK PRESSURE LEAKS LMA-PA041F, FORGING PROCESS, ENGINEERING AND INSPECTION RQMT BAC5793 PSD6-102, APP OF CORROSION RESISTANT FINISH BAC5842 PSD9-3, CHEMICAL MILLING TITANIUM BAC5861 PSD9-16, APP OF PHOSPHATE-FLUORIDE COATING BAC5928 PSD9-3, THERMAL CUTTING OF METALS Issued Date 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/17/2010 11/15/2010 11/15/2010 11/15/2010 11/12/2010 11/12/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/10/2010 11/8/2010 11/4/2010 11/4/2010 11/3/2010 11/3/2010 11/3/2010 11/3/2010 11/3/2010 11/2/2010 11/1/2010 11/1/2010 11/1/2010 11/1/2010 10/29/2010 10/29/2010 10/27/2010 10/27/2010 10/27/2010 10/27/2010 10/27/2010 10/27/2010 10/27/2010 10/27/2010 10/26/2010 10/26/2010 10/22/2010 10/21/2010 10/21/2010 10/21/2010 10/21/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002836 PSBO-002832 PSBO-002831 PSBO-002827 GPS-CLEN-0009 GPS-CLEN-0007 PSBO-002828 PSBO-002825 PSF22-000186 PSF22-001447 PSNG-000031 PSF22-000148 PSNG-000021 PSNG-000025 PSNG-000030 PSNG-000037 PSBO-002813 PSF22-000498 PSF22-000159 PSBO-002817 PSBO-002821 PSBO-002816 PSBO-002815 PSBO-001381 PSF22-001550 PSF22-001549 PSF22-001547 PSF22-000620 PSBO-002810 PSBO-002809 PSBO-002808 PSBO-002807 PSBO-002795 PSBO-002797 PSBO-002799 PSBO-002806 PSBO-002802 PSBO-002796 PSBO-002016 PSBO-002781 PSBO-002791 PSBO-002784 PSBO-002785 PSBO-002788 PSBO-002790 PSBO-002789 PSBO-002783 PSBO-002782 PSBA-000011 PSF35-000065 PSNG-000016 PSNG-000079 PSNG-000051 PSBO-000058 PSF35-000027 Rev. A A A A B C A A E B C F C C B B A B F A A A A C A A A B A A A A A A A A A A B A A A A A A A A A A B C B C G B Title BAC5969 PSD9-3, ELECTRICAL DISCHARGE MACHINING BAC5744 PSD6-19, MANUAL CLEANING BAC5750 PSD9-15, SOLVENT CLEANING 30M-NASM21042 REV B, NASM21042 RTWI - 92220-013 SOLVENT CLEANING CLEANING, SOLVENT VAPOR DEGREASING 7M749 REV D, INDICATOR, LIQUID LEVEL PS14120 REV K, SANDWHICH MATERIAL, ALUMINUM HONEYCOMB CORE 5PD01255 REV L, F/A-22 CONTROL SURFACES GAP AND MISMATCH REQ LMA-PR002D, OVERBRAIDING ON WIRE BUNDLES PS14124 REV N SANDWICH MATERIAL. HONEYCOMB CORE, CARBON SKIN 5PTPRT05-K-A02, ELECTRICAL WIRE HARNESS FABRICATION PS13001 REV T, PAASSIVATION OF CORROSION AND HEAT RESIST PS13209 REV W,COATING, MULTCOLORED CHEMICAL CONVERSION OF PS14007 REV AB, FORMING ALUMINUM ALLOY WROUGHT PRODUCTS PS17034 REV L, BUSHINGS, INSTALLATION OF BAC5357 PSD6-3, APP OF NON-CHROMATED INTEGRAL FUEL TANK COAT 5PTPPL07-B, CONTAMINATION CONTROL OF FA 22 COOLING FLUID LMA-PN008D, UNIQUE ID OF AIRCRAFT ITEMS BAC5636 PSD9-3, SUPERPLASTIC FORMING OF TI-6AI-4V BAC5719 PSD6-144, CHEMICAL CONVERSION COATINGS BAC5440 PSD9-3, HOLE PREPARATION, MACHINING, AND GRINDING O BAC5436 PSD9-2, ETCH INSPECT OF GROUND OR MACHINED STEEL PAR 9M161 REV R, FASTENER- CONTROL PANEL STUD ASSEMBLY 5PTA3125D, MATERIALS AND PROCESS FOR CORROSION PREVENTION 5PTA3124D, F22 SPECIFICATION FINISHES LMA-M9001, TI-6AL-4V (ELI) ALLOY SHAPES 5PTMAT04-F, TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR BAC5063 PSD9-55, FASTENER INSTALL IN COMP STRUCTURES BAC5063 PSD9-34, FASTENER INSTALL IN COMP STRUCTURES BAC5063 PSD6-68, FASTENER INSTALL IN COMP STRUCTURES BAC5019 PSD6-162, CHROMIC ACID ANODIZING ST7M291 REV M, COUPLING HALF, QUICK DISCONNECT 7M736 REV B, GAGE, PRESSURE, DIAL INDICATING30M-AS627, BOEING ST. LOUS SUPP BAC5018 PSD6-51, INSTALL OF SAFETYING DEVICES BAC5004-4 PSD6-1, ONE SIDED INSTALL BOLTS 7M526 REV M, CONNECTOR, TUBE COUPLING, BULKHEAD, BEAM SEAL 5M3187 REV A, SWITCHES BAC5000 PSD9-21, SEALING, GENERAL BAC5004 PSD6-121, INSTALLATION OF PERMANENT FASTENERS BAC5001-12 PSD6-27, FORMING AND STRAIGHTENING OF DUCTS BAC5001-5 PSD9-7, COUPLING FERRULE DUCT END FABRICATION BAC5001-6 PSD9-13, INSTALL OF TUBE FITTINGS, LUBRICATION AND BAC5001-6 PSD9-26, INSTALL OF TUBE FITTINGS, LIBRICATION AND BAC5001-6 PSD9-25, INSTALL OF TUBE FITTINGS, LUBRICATION AND BAC5001 PSD9-3, FLUID LINES, FITTINGS AND PRESSURE TESTING BAC5000 PSD9-24, SEALING, GENERAL F35-SQB-2010-00002 ISSUE 1 2ZZA00010C, INTERCHANGEABLE-REPLACEABLE PROCESS REQUIREMENTS PS12010 REV U, CLEANING, SOLVENT, HAND OR IMMERSION PS13630.3 REV J, REWORK OF PAINTED SURFACES PS23041 REV V, MACHINED PARTS, REQUIRMENTS AND ACCEPTANCE PS13508 REV U, APPLICATION OF AERODYNAMIC FAIRING COMPOUND 2ZZP00010 AMEND 3 ELECTRICAL BONDING, F-35 Issued Date 10/21/2010 10/21/2010 10/21/2010 10/20/2010 10/20/2010 10/20/2010 10/20/2010 10/19/2010 10/19/2010 10/19/2010 10/19/2010 10/19/2010 10/18/2010 10/18/2010 10/18/2010 10/18/2010 10/14/2010 10/14/2010 10/14/2010 10/14/2010 10/14/2010 10/14/2010 10/14/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/13/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/12/2010 10/11/2010 10/11/2010 10/7/2010 10/7/2010 10/7/2010 10/6/2010 10/6/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000015 PSSA-000412 PSF22-000290 PSF22-000291 PSF22-000293 PSF22-000292 PSBO-000405 PSBO-001981 PSBO-000812 PSBO-002775 PSBO-000845 PSBO-001083 PSBO-001652 PSBO-001738 PSBO-001740 PSBO-002774 PSBO-002766 PSBO-002765 PSBO-002764 PSBO-002763 PSBO-002762 PSUT-000002 PSUT-000005 PSBO-002760 PSF35-000105 PSF35-000161 PSF22-000283 PSF22-000284 PSF22-001444 PSBO-001739 PSBO-002754 PSBO-002164 PSBO-002756 PSBO-002758 PSBO-002757 PSBO-002755 PSBO-002553 PSBO-002752 PSBO-002750 GPS-SEAL-0001 PSBO-002751 PSBO-000175 PSBO-002749 PSBO-002748 PSBO-001380 PSBO-002506 PSBO-002620 PSBO-001664 PSBO-002741 PSBO-002740 PSBO-002739 PSBO-002738 PSBO-002737 PSBO-001742 PSBO-001741 Rev. B A B B B B B B B A C C B B B A A A A A A A A A C B B B B B A B A A A A B A A D A F A A B B B B A A A A A B B Title 2ZZP00006D, CONTROL OF F35 AIR VEHICLE CRITICAL PARTS GEN SP SS27253 REV 01, PLATE, ID, WITH UNIQUE ID MIL-STD-129, MILITARYMARKING FOR SHIPMENT AND STORAGE SAE AMS 3711, CORE, HONEYCOMB FIBROUS, ARAMID BASE, PHENOLI SAE AMS 3716, CORE, HONEYCOMB, GLASS/PHENOLIC BIAS WEAVE FI SAE AMS 3715, CORE, HONEYCOMB, GLASS/PHENOLIC MMS549 REV L, MODERATE TEMPERATURE, HIGH STRENGTH CARBON/EP SRP 2103 (J) - PRESS-FIT BUSHING REPAIR FOR MOLDLINE SKIN AN DPS1.001 REV J, INDEX OF SUPPLEMENTAL DPS'S ADDENDUM NO. 12 REV T, DPS_PS CONVERSION, NUMERICAL INDEX 30M-NAS1580 REV G, SUPPLEMENT FOR NAS1580 27M100 REV T, CLEANING AND PACKAGING OF FLUID SYSTEM COMPON 30M-NAS653 REV B, NAS653 THRU 658, BOEING ST.-ST. LOUIS SUPP 30M-NAS663 REV B, NAS663 THRU 668 BOEING-ST. LOUIS SUPPLEME 30M-NAS1581 REV G, BOEING-ST. LOUIS SUPPLEMENT FOR ST9M588 REV V, CLAMP, LOOP- CUSHIONED, INTEGRAL LOCK 6M62 REV AH, CUTOUTS AND MOUNTING PATTERNS, STANDARD DIMENSI MMS1233 ADD 1 REV L, APPORVED MMS 1233 MATERIAL SOURCES MMS1233 REV F, TITANIUM ALLOY FORGINGS, STANDARD GRADE MMS1202 ADD 1 REV E, APPROVED MMS 1202 MATERIAL SOURCES MMS1202 REV F, TITANIUM ALLOY EXTRUSIONS, ANNEALED ASQR-07.5, CONTROL OF SOFTWARE ASQR-20.1 REV 4, SUPPLIER SAMPLING REQUIREMENTS PS12117, STRIPPING OF ORGANIC COATINGS FROM FA 18 AND EA 18G LMA-PR005 REV G, MFG OF ELECTRICAL AIRCRAFT HARNESSES LMA-MR024/V03-01, HIGH TEMP EXTERIOR TOPCOAT FQPL-5PTPAG41-2 FORT WORTH QUALIFIED PROCESS LIST 5PTPAG41 FQPL-5PTPBG28-1 FORT WORTH QUALIFIED PROCESS LIST 5PTPBG28 LMA-D0031A, APPN SOLID SHIM STOCK REQUIREMENTS 30M-NAS1578 REV E, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS5986 REV A, AS5986, BOEING-ST.LOUIS SUPP FOR 5M3016 REV E, SWITCH-PUSH-BUTTON, EXTENDED LENGTH 30M-NASM315, NASM315, BOEING ST. LOUIS SUPP FOR PS17410.1 REV W, TERMINALS AND SPLICES, ELECTRICAL 30M-NASM35650, NASM35650 BOEING ST. LOUIS SUPP FOR 30M-AS9882, AS9882, BOEING ST. LOUIS SUPP FOR BACE21CL REV D, ELBOW, 90 DEG, FLARELESS TUBE TO SWIVEL BSS7002 SSD9-476, STORAGE OF TIME AND TEMP SENSITIVE MATERIA BAC5725 PSD9-19, STRIPPING ORGANIC MATERIALS LIQUID SHIMMING OF AIRCRAFT ASSEMBLIES BSS7002 SSD9-474, STORAGE OF TIME AND TEMP SENSITIVE MATERIA PS16001.7 REV AC - MARKING OF AIRCRAFT ELECTRICAL WIRE BUND 6M141 REV B, TYPE CODES, BUS BAR 5M3197, FUSE BLOCK 4M36 REV AW, WASHER-FLAT, METAL, SPECIAL BACN10JB REV Y, NUT, PLATE, SELF-LOCKING, TWO LUG BAC5355 REV D, FABRICATION OF FLAME PROPAGATION RESISTANT PS19210 REV N, CONTROLLED TORQUE INSTALLATION OF FLUSH SCREW 30M-AS92001, AS92001, BOEING-ST. LOUIS SUPP FOR 5M3193, CONNECTOR, MINIATURE AUDIO 5M2415 REV H, SWITCH-MULTIPOLE, MULTIPOSITION, LEVERLOCK PS21252 REV G SUPP 1 AV-8B, VISUAL INSPECT OF COMP PARTS ST9M389 REV AB, TAPE, ID-FLUID LINE COLOR CODED 30M-NAS6803 THRU NAS 6820 REV E, NAS6803 THRU NAS 6820, BOEI 30M-NAS6403 THRU NAS 6420 REV F, NAS6403 THRU NAS 6420 BOEIN Issued Date 10/6/2010 10/5/2010 9/30/2010 9/30/2010 9/30/2010 9/30/2010 9/29/2010 9/28/2010 9/27/2010 9/24/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/23/2010 9/16/2010 9/16/2010 9/15/2010 9/15/2010 9/14/2010 9/10/2010 9/10/2010 9/9/2010 9/8/2010 9/8/2010 9/8/2010 9/8/2010 9/8/2010 9/8/2010 9/8/2010 9/7/2010 9/7/2010 9/7/2010 9/7/2010 9/7/2010 9/2/2010 9/2/2010 9/2/2010 9/2/2010 8/31/2010 8/31/2010 8/25/2010 8/25/2010 8/25/2010 8/25/2010 8/25/2010 8/25/2010 8/25/2010 8/25/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001543 PSPW-000044 PSPW-000048 PSBA-000009 PSBO-002736 PSBA-000010 PSBO-002181 PSBO-002735 PSBO-002734 PSBO-002730 PSBO-002731 PSSA-000397 PSSA-000403 PSSA-000407 PSSA-000410 PSSA-000409 PSSA-000404 PSF22-001526 PSF22-001542 PSBO-002712 PSSA-000392 PSF35-000314 PSBO-002729 PSBO-002727 PSBO-002728 PSF22-000047 PSBO-002720 PSBO-002722 PSBO-002725 PSBO-002726 PSBO-002724 PSBO-002721 PSF22-000117 PSBO-000091 PSF35-000136 PSBO-002717 PSBO-002715 PSBO-002714 PSBO-002713 PSBO-002709 PSBO-001801 PSBO-001920 PSBO-002708 PSBO-002706 PSNG-000086 PSNG-000085 PSNG-000080 PSBO-002702 PSSA-000385 PSSA-000386 PSBO-000318 PSBO-002700 PSBO-002701 PSBO-002699 PSSA-000367 Rev. A D D A A A B A A A A A A A A A A B A B A B A A A E A A A A A A E D B A A A A A B C A A A A A A A A B A A A A Title LMA-M9002, TI-6AL-4V (ELI) ALLOY WIRE FOR DIRECT MFG DEPOSIT SIS-48 REV D, LPC FAIRINGS FIBER REINFORCED COMP VIS-543 REV J, LPC FAIRINGS FIBER REINFORCED COMP BAES-JSF-QMS-2356-06-ST HOLE CODING STANDARD PB4-981, AMD TO PS14278 REV B 2GSA00003 B - MACHINED PART DESIGN AND MANUFACTURING PB13-122 REV A, AMD TO PS23600, AGE SHELF LIFE CONTROL REQ 5M9 REV K, BUS BAR-CIRCUIT BREAKER PB1-416, AMD TO PS11207 REV P MMS411 REV F, ALUMINUM OXIDE, ABRASIVE BLASTING MMS411 ADD 1, APPROVED SOURCES FOR ALUMINUM OXIDE GRIT SS8669 REV 20 AMD 1, ADHESIVE BONDING SS9208 REV 49 AMD 01, PRODUCT DEF. DESIGN CRITERIA SS9220 REV 5 AMD 6, ADHESIVE BONDED COMP SANDWHICH PANELS SS9574 REV 03 AMD 04, CLOTH, GLASS, FINISHED, FOR PLASTIC LA SS9574 REV 03 AMD 03, CLOTH, GLASS, FINISHED, FOR PLASTIC LA SS9208 REV 49 AMD 02, PRODUCT DEF. DESIGN CRITERIA LMA-MF084A, UNSUPPORTED SELF ADHESIVE SILICONE TAPE LMA-ML060 SILICONE COMPOUNDS, TWO-PART, ROOM TEMP VULCANIZIN 7M482 REV G, HOSE ASSEMBLY, NONMETALLIC SS8620 REV 4 DEV 1, ADHESIVE SURFACING AGENT, 350 DEG CURE LMA-PR026B, REWORK OF WIRE AND FIBER OPTIC HARNESSES DMS1957 REV L, INTEGRAL SKIN FLEXIBLE URETHANE FOAM ST5M1488 REV L, CONTACT, ELECTRICAL CONNECTOR, CRIMP REMOVAB ST9M571 REV P, RECEPTACLE-TURNLOCK FASTENER, ANGLE MOUNTING 5PTPJL16-K, PROCESS SPEC ORGANIC COATINGS, APPLICATION OF ST7M227 REV L, TEE, TUBE-REDUCER, THREE SWIVEL NUTS 7M909 REV B, TEE-REDUCER, SWIVEL NUTS ON RUN MMS657, GREASE, WIDE TEMP RANGE LITHUM OR LITHIUM COMPLEX TH MMS657 ADD 1 REV A, APPROVED MMS 657 MATERIAL SOURCES 30M-AS90991, AS90991, BOEING-ST. LOUIS SUPP FOR 3M893 REV H, SCREW-PAN HEAD, PHILLIPS RECESS 5PTPBG04M, INSTALLATION PROCEDURE FOR BONDED NUTPLATES PS14137 REV J - INSTALLATION OF ADHESIVE BONDED INSERTS (DOU LMA-ML121B, ADHESIVE, EPOXY, FLEXIBLE, HIGH PEEL, ROOM TEMP PS15169 REV C, HEAT TREAT OF AERMET 100 STEEL 30M-NAS1473 REV B, NAS1473, BOEING ST. LOUIS SUPP FOR 30M-AS15001 REV A, AS15002, BOEING ST. LOUIS SUPP FOR 14M924, PLASTIC SPECIAL SHAPED SECTION ST7M452 REV K, NUT ASSEMBLY, COUPLING ST3M571 REV AA, BOLT - CLOSE TOLER, 12 POINT, FLANGE HEAD DMS1557 REV P, ADHESIVE, METAL TO METAL, HIGH STRENGTH BAC5312 PSD9-11, APP OF PLASTIC FILM MARKERS BAC5755 PSD6-88, APP OF INTERIOR DECORATIVE FINISHES PS21252 REV G, VISUAL INSPECTION OF CARBON EPOXY COMPOSITE PS20004 REV J, REWORK OF SCRATCHED, ABRADED, OR CORRODED SUR PS14030 REV H, HONEYCOMB SANDWICH ASSEMBLIES, ALUMINUM, PB9-319, AMD TO PS19210 (REV. M) CONTROLLED TORQUE SS1038 REV 04, 60 FLANGED HOLES SS1040 REV 06, FLANGED-HOLE-DATA PS21335.16 REV E - PHYSIOCHEMICAL TEST METHODS: FTIR TEST FO 5M1988 REV E, CONNECTOR - COAXIAL, RADIO FREQUENCY SER HN 9M982 REV C, MOUNT, RESILIENT - VIBRATION PS14223 REV U DEV 1, HEXCEL / FAVBRICATION, PROCUREMENT SS9225 REV 14 AMD 05, ADHESIVE BONDED ALUMINUM SANDWICH PANE Issued Date 8/24/2010 8/23/2010 8/23/2010 8/20/2010 8/20/2010 8/20/2010 8/18/2010 8/18/2010 8/18/2010 8/16/2010 8/16/2010 8/13/2010 8/13/2010 8/13/2010 8/13/2010 8/13/2010 8/13/2010 8/12/2010 8/12/2010 8/11/2010 8/11/2010 8/11/2010 8/5/2010 8/4/2010 8/4/2010 8/2/2010 7/28/2010 7/28/2010 7/28/2010 7/28/2010 7/28/2010 7/28/2010 7/27/2010 7/21/2010 7/21/2010 7/21/2010 7/21/2010 7/21/2010 7/21/2010 7/21/2010 7/21/2010 7/20/2010 7/20/2010 7/20/2010 7/20/2010 7/20/2010 7/20/2010 7/14/2010 7/8/2010 7/8/2010 7/7/2010 7/7/2010 7/7/2010 7/7/2010 7/6/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000368 PSSA-000369 PSSA-000372 PSSA-000379 PSSA-000383 PSSA-000373 PSSA-000370 PSBO-001687 PSBO-002693 PSBO-002694 PSBO-002696 PSBO-002695 PSBO-002661 PSF35-000014 PSBO-002685 PSSA-000010 PSNG-000017 PSBO-002689 PSBO-002690 PSNG-000003 PSBO-002688 PSBO-001226 PSBO-002676 PSBO-002675 PSBO-002272 PSBO-002416 PSBO-002674 PSBO-002672 PSBO-000123 PSBO-001633 PSBO-002670 PSBO-002669 GPS-TEST-0009 PSBO-001367 PSBO-002666 PSBO-002667 PSBO-001421 PSF22-001541 PSNG-000028 PSF35-000328 PSF22-001540 PSBO-002668 PSBO-002665 PSBO-001674 PSBO-000130 PSBO-002660 PSBO-002663 PSSA-000364 PSSA-000363 PSF22-000561 PSF22-000147 PSF35-000306 PSF22-001539 PSBO-002656 PSBO-001191 Rev. A A A A A A A B A A A A B B A B B A A B A C A A B B A A B B A A B B A A B A C A A A A B C A A A A B D B A A C Title SS9214 REV 04, ALTERNATE ORGANIC FINISHES SS9214 REV 04 AMD 01, ALTERNATE ORGANIC FINISHES SS9170/140 REV 03 AMD 01, EMM, VACUUM BAG MATERIAL CLASS 1 SS8049 REV 03 AMD 02, STEEL, 4340, PROCESSING FOR 260-280 KS SS7001 REV 11, STRIP PANEL FASTENER SS9170/140 REV 03 AMD 02, EMM, VACUUM BAG MATERIAL, CLASS 1 SS9170/681 REV 04 AMD 02, EMM SOLVENT DAMPENED WIPER CLOTHS 30M-M83413/8 REV D MIL-C-83413/8 BOEING-ST. LOUIS SUPPLEMENT ST3M719 REV T, NUT, SELF-LOCKING, PLATE1MA10717, ALUMINUM ALLOY SPECIAL SHAPED-SECTION-EXTRUDED 9M174 REV A, GROMMET, RUBBER-CABLE PRESSURE SEAL 9M201 REV K, BUTTON, PLUG-STEEL 27M110 REV C, OXYGEN SYSTEM ON OFF VALVES E1-0234M REV E, F-35 PACKAGING REQ MANUAL BAC5009 PSD9-61, BOLT AND NUT INSTALL SS8620 REV 4 - ADHESIVE SURFACING AGENTS PS12020 REV AA, CLEANING, SLOVENT VAPOR DEGREASING BAC5636 REV F, SUPERPLASTIC FORMING OF TI-6AI-4V BAC5636 PSD6-12, SUPERPLASTIC FORMING OF TI-6AL-4V MMS350 REV K, STRUCTURAL ADHESIVE SYSTEM, INTERMEDIATE MODUL BAC5602 PSD6-201, HEAT TREAT OF ALUMINUM ALLOYS BAC5325 REV J, APP OF NONCHROMATED PRIMER ON COMPOSIT BAC5632 PSD6-72, BORIC ACID-SULFURIC ACID ANODIZING BAC5632 PSD6-60, BORIC ACID- SULFURIC ACID ANODIZING BACC63BP REV BB, CONNECTOR, ELECTRICAL, PLUG, STRAIGHT BSS7601 REV L, EMERGENCY ESCAPE SYSTEMS BAC5619 PSD6-52, HEAT TREATMENT OF CORROSION RESISTANT STEEL BAC5034 PSD6-134, TEMP. PROTECT OF PRODUCT MATERIALS, PARTS, PS15000.11 REV C - HARDENING PH GRADE STAINLESS STEEL TO THE 30M-NAS1169 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR ST7M414 REV L, VALVE-ON OFF, TOGGLE, OXYGEN PS13102 REV R, PLATING, CHROMIUM ELECTRO TUBING PROOF TESTING DPS3.69-5 REV V, FORMING OF 2000 SERIES ALUMINUM ALLOYS & DM ST9M553 REV K, PIN, QUICK RELEASE 30M-M26626 REV A, MIL-PRF-26626, BOEING ST. LOUIS SUPP 30M-NAS1351 REV B, NAS1351, BOEING-ST. LOUIS SUPPLEMENT FOR 5PTC4014, .ADAPTER, BULKHEAD- FLEXIBLE COUPLING, MALE TO FEM PS13525 REV AB, POLYUR CORROSIONRESISTANT COATING, SPRAY LMA-ME001, CLOSED CELL NEOPRENE FOAM 5PTMYT00-A, LIMITED SUPPLIER DISTRIBUTION 30M-NAS6303 THRU 6320 REV D, NAS6303 THRU 6320 DMS1834 REV M, FORGINGS, ALUMINUM BPI-5459, MANUFACTURING SELF-EXAMINATION (MSE) PS15500 REV Y - GENERAL HEAT TREATING CRITERIA FOR ALUMINUM PS19425 REV T, FASTENERS, LOCKBOLTS 4M315 REV D, BUSHING, REPAIR-100 DEG COUNTERSUNK, TWO PIECE ASQR-01 REV A, APP B SUPPORTING DOCUMENTATION ASQR-01 REV C, UNIQUE REQUIREMENTS 5PD41528V, F22 MIDFUSELAGE GAP AND MISMATCH REQUIREMENTS 5PTPLG05-L PS FOR THE MANUFACTURE AND QA CONTROL OF F-22 NO LMA-PR007E, CABLE AND SHIELD TERMINATIONS 5PTPBT28-A, SPLIT SLEEVE COLD WORKING OF HOLES IN METALLICS ST5M1374 REV D, TERMINAL BLOCK-STANDOFF, TURRET BAC5514-589 REV Y APPLICATION OF CORROSION INHIBITING ADHESI Issued Date 7/6/2010 7/6/2010 7/6/2010 7/6/2010 7/6/2010 7/6/2010 7/6/2010 6/30/2010 6/30/2010 6/30/2010 6/30/2010 6/30/2010 6/23/2010 6/22/2010 6/21/2010 6/21/2010 6/21/2010 6/21/2010 6/21/2010 6/21/2010 6/21/2010 6/17/2010 6/17/2010 6/17/2010 6/17/2010 6/17/2010 6/17/2010 6/17/2010 6/16/2010 6/16/2010 6/16/2010 6/16/2010 6/14/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 6/8/2010 6/7/2010 6/2/2010 6/2/2010 6/2/2010 6/2/2010 6/2/2010 6/1/2010 5/28/2010 5/28/2010 5/28/2010 5/26/2010 5/24/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000193 PSNG-000006 PSNG-000011 PSF22-000094 PSBO-002650 PSBO-002653 PSF35-000219 PSF35-000274 PSF35-000277 PSF35-000280 PSF35-000279 PSF35-000278 PSF35-000275 PSF35-000281 PSF35-000290 PSF35-000289 PSF35-000288 PSF35-000287 PSF35-000286 PSF35-000285 PSF35-000284 PSF35-000283 PSF35-000282 PSF35-000300 PSF35-000299 PSF35-000298 PSF35-000297 PSF35-000296 PSF35-000295 PSF35-000294 PSF35-000292 PSF35-000291 PSF35-000324 PSF35-000322 PSF35-000319 PSF35-000318 PSF35-000317 PSF35-000316 PSF35-000315 PSF35-000313 PSF35-000312 PSF35-000311 PSF35-000310 PSF35-000308 PSF35-000307 PSF35-000303 PSF35-000302 PSF22-000098 PSF35-000184 PSF35-000187 PSF35-000188 PSF35-000186 PSF35-000185 PSF35-000189 PSF35-000192 Rev. C B B B A A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A A A A A A Title 5PD01069-J ALTE PURCH ACCEPT PLAN FOR COMP MATER ON THE F-22 MMS1420 REV G, MATERIAL SOURCES STF1757 REV F, FINISH INSTRUCTION 5PTMAT01-G-A01, TAPE, CARBON FIBER, BISMALE RESIN IMPREGNATE DPS9.29 REV AR, SURFACE TREATMENT OF TITANIUM 4M102 REV F, WASHER, KEY LMA-PB045B, FASTENER INSTALL, CAPTIVE SCREWS, FLARED END TYP LMA-PK009, BONDING OF LOAD PADS FOR STRUCTURAL TESTING LMA-PK016, PROCESS AND QUALITY CONTROL OF CO BONDED ASSEMBLI LMA-PL003D, MFG OF NONMETALLIC HONEYCOMB CORE DETAILS LMA-PL001B, APP OF SOLID AND LIQUID SHIM MATERIAL IN MISMATC LMA-PK022C, PROCESS AND QUALITY CONTROL OF OVEN CURING LMA-PK010A, BONDING CLOSED CELL RUBBER LOAD PADS FOR STRUCTU LMA-PL004, FABRICATION AND ACCEPTANCE OF COCURE FIBER REINFO LMA-PL022, PROCESSING AND QUALITY CONTROL OF LMA-MV004 LMA-PL021D, MFG AND QUALITY CONTROL OF OVEN CURED EPOXY COMP LMA-PL019B, SELECTIVE LASER SINTERING PROCESS, THERMPOLASTIC LMA-PL018, FORMING OF THERMOPLASTIC PARTS LMA-PL017, MFG OF ALUMINUM HONEYCOMB CORE DETAILS LMA-PL014C, OUT OF AUTOCLAVE FABRICATION OF PI PREFORM JOINT LMA-PL010, DRILLING AND MACHINING OF COMP AND COMP METAL STA LMA-PL006, MFG AND QUALITY CONTROL OF BMI COMP STRUCTURE LMA-PL005, MFG AND QUALITY CONTROL OF 355 F CURE EPOXY COMP LMA-PN006, APP OF ADHESIVE BACKED NAMEPLATES AND DECALS LMA-PN002, APP PROCEDURES FOR TUBE MARKING TAPES LMA-PM005A, LUBRICANT, SOLID FILM, AIR-DRYING AND HEAT-CURED LMA-PL404, Z-PINNING OF COMP PREFORMS LMA-PL401, FABRICATION OF POLYIMIDE GLASS LMA-PL400A, COMP SURFACE PREP BY MEDIA BLAST PROCESS LMA-PL208, FABRICATION OF CARBON LMA-PL025, MOLDING PROCESS, THERMOPLASTIC PARTS LMA-PL023A, FABRICATION OF LMA-MB009 POLYIMIDE GLASS LAMINAT LMA-QN008B, LM AERO QPL FOR LMA-PN008 LMA-QL019A, LM AERO QPL FOR LMA-PL019 LMA-QH010, LM AERO QPL FOR LMA-PH010 LMA-QB016, LM AERO QPL FOR LMA-PB016 LMA-QA020A, LM AERO QPL FOR LMA-PA020 LMA-PU305, PROTECTION OF PARTS AND MATERIALS IN STORAGE LMA-PT013, DIMENSIONAL CONTROL OF CASTINGS AND FORGINGS LMA-PR025, FIBER OPTIC TERMINI MT CONNECTOR END FACE QUALITY LMA-PR022B, INSTRUCTIONS FOR MFG OF FIBER OPTIC HARNESSES LMA-PR021A, FIBER OPTIC CABLE TERMINATION LMA-PR020B, IN-PROCESS FIBER OPTIC TESTING LMA-PR011, ELECTRICAL CONDUIT, ASSEMBLY AND INSTALLATION LMA-PR009A, INSTALL OF FIBER OPTIC CABLE HARNESSES LMA-PN407, APP OF POLYURETHANE STENCIL ENAMEL LMA-PN010, FABRICATION OF UNIQUE ID NAMEPLATES OF AIRCRAFT I 5PTPKG12-E, BONDING WITH GENERAL PURPOSE ADHESIVES LMA-PA006, PROCESSING OF ALLOY STEELS TO 220 KSI UTS, LMA-PA017, STANDARD MACHINING PRACTICES-TOLERANCES AND ALLOW LMA-PA019, PROCESSING OF CARBON AND LOW ALLOY STEELS TO BELO LMA-PA013, PROCESSING OF PRECIPITATION HARDENING STAINLESS S LMA-PA011, PROCESSING OF TITANIUM AND TITANIUM ALLOY STRUCTU LMA-PA020C, SPECIAL COLDWORKING PROCESS LMA-PA045, CASTINGS, AEROSPACE SUPPORT EQUIPMENT Issued Date 5/24/2010 5/21/2010 5/21/2010 5/20/2010 5/19/2010 5/19/2010 5/19/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/17/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000255 PSF35-000254 PSF35-000253 PSF35-000252 PSF35-000251 PSF35-000250 PSF35-000249 PSF35-000248 PSF35-000246 PSF35-000273 PSF35-000272 PSF35-000271 PSF35-000270 PSF35-000269 PSF35-000268 PSF35-000267 PSF35-000266 PSF35-000265 PSF35-000264 PSF35-000263 PSF35-000262 PSF35-000261 PSF35-000260 PSF35-000259 PSF35-000258 PSF35-000257 PSF35-000256 PSF35-000245 PSF35-000244 PSF35-000243 PSF35-000242 PSF35-000241 PSF35-000240 PSF35-000239 PSF35-000206 PSF35-000203 PSF35-000202 PSF35-000199 PSF35-000197 PSF35-000196 PSF35-000195 PSF35-000194 PSF35-000193 PSF35-000217 PSF35-000215 PSF35-000214 PSF35-000213 PSF35-000212 PSF35-000211 PSF35-000210 PSF35-000209 PSF35-000207 PSF35-000238 PSF35-000237 PSF35-000236 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title LMA-PH302, PHOSPHATE COATING FOR FERROUS METALS LMA-PH301, PASSIVATION OF CORROSION RESISTANT STEEL LMA-PH211, PHOSPHORIC ACID ANODIZING OF ALUMINUM AND ALUMINU LMA-PH208, SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM LMA-PH206, HARD ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS LMA-PH090B, THIN FILM SULFURIC ACID ANODIZE TREATMENT FOR LMA-PH029A, CHEMICAL FILM TREATMENT, COLORED, NON-IMMERSION, LMA-PH024, NICKEL AND CADMIUM PLATING, ELECTRO-DEPOSITED STY LMA-PH021A, SULFAMATE-NICKEL PLATING, ELECTROLYTIC LMA-PK008, PROCESS GUIDLINES FOR LMA-PK007D, PROCESS AND QUALITY CONTROL OF ADHESIVE BONDED A LMA-PK006, PROCESS AND QUALITY CONTROL OF 350 DEG CURE LMA-PK005, APP OF CASTING RESIN TO BONDED ASSEMBLIES LMA-PK001, INSTALLATION OF STRAIN GAGES LMA-PJ901, APP OF SCALE INHIBITING COMPOUND LMA-PJ516, APP AND REMOVAL OF TEMP PROTECTIVE COATINGS LMA-PJ121, APP OF LMA-MR006 POLYURETHANE INSULATION COATING LMA-PJ037, APP OF LMA-MR008, PTFE FILLED COATINGS LMA-PJ021, APP OF HIGH TEMP EXTERIOR TOPCOAT LMA-PJ020, APP OF HIGH TEMP PRIMER LMA-PJ017A, FINISHING OF PLASTIC PARTS AND ASSEMBLIES LMA-PJ016, APP OF ORGANIC COATINGS LMA-PJ015, INTEGRAL FUEL TANK COATING, PREP AND APP OF LMA-PJ013B, TOUCHUP RQMTS FOR CHEMICAL AND ORGANIC FINISHES LMA-PJ012, APP OF PRIMER COATINGS LMA-PJ006, CORROSION PREVENTIVE COMPOUNDS, APP OF LMA-PJ001, APP OF THERMAL BARRIER COATING LMA-PH010, PLATING, CORROSION RESISTANT LMA-PG701, CLEANING OF COPPER AND COPPER ALLOYS LMA-PG401A, CLEANING OF TITANIUM AND TITANIUM ALLOYS LMA-PG301A, CLEANING OF ALUMINUM AND ALUMINUM ALLOYS LMA-PG201, CLEANING OF CARBON AND LOW ALLOY STEELS LMA-PG010, CLEANLINESS AND PACKAGING RQMTS FOR OXY SYSTEM TU LMA-PG004, SURFACE PREPARATION OF PARTS FOR ADHESIVE BONDING LMA-PB016, INSTALL PROCEDURES FOR FIREWALL MATERIALS LMA-PB009C, PERMANENT TUBE JOINT INSTALL, EXTERNAL SWAGE TYP LMA-PB007A, LOCKBOLTS, INSTALL OF LMA-PB003, INSTALL OF PLUMBING LINES LMA-PA411, STANDARD MACHINING PRACTICES, TOLERANCES LMA-PA410, DRILLING REAMING AND GRINDING OF HIGH STRENGTH ST LMA-PA405, TUMBLE AND VIBRATORY DEBURRING OF AIRCRAFT PARTS LMA-PA307A, SUPERPLASTIC FORMING OF TITANIUM ALLOYS LMA-PA090A, CASTINGS, AEROSPACE QUALITY, ENGINEERING AND INS LMA-PB040A, INSTALL PROCEDURES FOR INSULATION BLANKETS LMA-PB035C, INSTALL PROCEDURES FOR FIRE RESISTANCT DUCT INSU LMA-PB034, DECALS FOR AIRCRAFT, APP OF LMA-PB032A, INSTALL OF BLIND BOLTS FOR HOLE FILLING LMA-PB028B, COLD WORKING OF HOLES, ENGINEERING AND INSPECTIO LMA-PB026, FASTENER INSTALL 100 DEG FLUSH HEAD PIN LMA-PB025A, FASTENER INSTALL, SOLID CORE BLIND BOLTS LMA-PB024, SWAGING AND FERRULE INSTALL LMA-PB018, INSTALL OF HIGH TEMP INSULATION LMA-PF008, PROCESS FOR APP OF POLYURETHANE FOAM IN PLACE MAT LMA-PF007, PROCEDURE FOR APP OF SILICONE BASED HIGH TEMP SEA LMA-PF006A, BLOCKING OF GAPS IN NON-FUEL AREAS OF AIRCRAFT S Issued Date 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000235 PSF35-000234 PSF35-000233 PSF35-000232 PSF35-000231 PSF35-000230 PSF35-000229 PSF35-000228 PSF35-000227 PSF35-000226 PSF35-000225 PSF35-000224 PSF35-000221 PSF35-000218 PSF35-000190 PSBO-001125 PSF22-001535 PSF22-001537 PSF35-000106 PSF35-000108 PSF35-000110 PSF35-000112 PSF35-000171 PSF35-000169 PSF35-000167 PSF35-000166 PSF35-000165 PSF35-000164 PSF35-000163 PSF35-000162 PSF35-000160 PSF35-000183 PSF35-000182 PSF35-000181 PSF35-000180 PSF35-000179 PSF35-000178 PSF35-000177 PSF35-000176 PSF35-000174 PSF35-000173 PSF35-000172 PSF35-000159 PSF35-000158 PSF35-000157 PSF35-000156 PSF35-000155 PSF35-000154 PSF35-000153 PSF35-000122 PSF35-000121 PSF35-000120 PSF35-000119 PSF35-000118 PSF35-000117 Rev. A A A A A A A A A A A A A A A C A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title LMA-PF003A, REPAIR OF FUEL TANK LEAKS. LMA-PE007A, ELECTRON BEAM WELDING LMA-PE006, FRICTION STIR WELDING OF ALUMINUM ALLOY BUTT JOIN LMA-PE004, BRAZING OF ALUMINUM LMA-PD020, HEAT TREATMENT AND PROCESSING OF COPPER AND COPPE LMA-PD001, HEAT TREATMENT OF AERMET 100 STEEL LMA-PC803, PRESSURE TESTING OF NON-FERROUS CASTINGS LMA-PC401A, SHEAROGRAPHY NON-DESTRUCTIVE INSPECT LMA-PC019, AMMONIUM BIFLUORIDE ETCH INSPECT OF TITANIUM ALLO LMA-PC014A, INSPECT, ULTRASONIC, PROCEDURE FOR EMBEDDED CORE LMA-PC012A, INSPECT, EDDY CURRENT OF FRACTURE DURABILITY CRI LMA-PC010, ACID ETCH INSPECT OF STEEL PARTS LMA-PB089, APP OF POLYURETHANE RAIN EROSION RESISTANT TAPE A LMA-PB041, RUE PINS, INSTALL OF LMA-PA024, ADDITIVE MFG PREFORM PROCESSES FOR TITANIUM ALLOY BAC5004-1 REV R, SOLID RIVET INSTALLATION LMA-MW004, AMORPHOUS SILICA FIBER MATERIAL FOR THREAD, ROPE LMA-MG098 QUARTZ CLOTH TAPE LMA-MK001A, BISMALEIMIDE POTTING COMPOUND LMA-MK003A, MOLDABLE PLASTIC SHIM LMA-MK006A, POLYCARBONATE SHEET, ROD ADN PELLETS LMA-MK019A, THERMOPLASTIC POWDER LMA-MU004, FOAM, POLYURETHANE, FOAM IN PLACE, VOID FILLER LMA-MR400, SURFACE PRIMER FOR POLYETHYLENE FOAM LMA-MR059B, PRIMERS FOR SILICONE SEALANTS LMA-MR058C, PRIMER FOR SEALANTS LMA-MR035B, PRIMER COATING, FLEXIBLE LMA-MR029, STENCIL ENAMEL LMA-MR028, COATING, POLYURETHANE POLYCARBONATE-COMPATIBLE LMA-MR027B, TEFLON PIGMENTED COATINGS LMA-MR023, HIGH TEMP PRIMER FOR EXTERIOR TOPCOAT LMA-MW002D, FIBER INSULATION LMA-MW025, FLEXIBLE THERMAL BLANKET INSULATION LMA-MW045, PREFORMED CERAMIC THERMAL INSULATION LMA-MY081, HEAT SHRINKABLE TUBING WITH ADHESIVE LMA-MW001A, THERMAL BARRIER COATING LMA-MV004, CONDUCTIVE FOAM, SEMI-RIGID LMA-MV003, SOLID GLASS MICROBEADS, NON TREATED LMA-MU065A, CANOPY SEALING COMPOUND LMA-MU044, SEALANT, INTEGRAL FUEL TANK AND GENERAL USAGE LMA-MU031, HIGH TEMP GENERAL PURPOSE SEALING COMPOUND LMA-MU008B, SEALING MATERIALS, LOW BOND STRENGTH GASKETS AND LMA-MR018, PTFE-BEARING ANTI-WEAR LINER COATING LMA-MR017, ANTISTATIC RAIN EROSION COATING SYSTEM LMA-MR008A, ABRASION RESISTANT POLYURETHANE COATINGS, TEFLON LMA-MR007A, DIRECT PRINT MARKING INK FOR UNIQUE ID LMA-MR006A, MOISTURE BARRIER COATING LMA-MR004, PLASTISOL, FOR DIP COATING METALLIC PARTS LMA-MR002, COATING SYSTEM, RAIN EROSION ADN FUNGUS RESISTANT LMA-ML017B, ADHESIVE- SEALING COMPOUND, ONE PART, ROOM TEMP LMA-ML008, TACKIFIER, SOLVATED, EPOXY AND BISMALEIMIDE RESIN LMA-ML005, EPOXY RESIN AND TACKIFIER FOR RESIN TRANSFER MOLD LMA-ML002, INTERMEDIATE TEMP CURING TWO-PART EPOXY MATERIALS LMA-MK085A, NYLON SHEET AND ROD LMA-MK064, POLYPHENYLENE SULFIDE SHEET, ROD, AND PELLET Issued Date 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/14/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000116 PSF35-000115 PSF35-000113 PSF35-000133 PSF35-000132 PSF35-000130 PSF35-000129 PSF35-000128 PSF35-000127 PSF35-000126 PSF35-000125 PSF35-000124 PSF35-000152 PSF35-000151 PSF35-000150 PSF35-000149 PSF35-000148 PSF35-000147 PSF35-000146 PSF35-000145 PSF35-000144 PSF35-000143 PSF35-000142 PSF35-000141 PSF35-000140 PSF35-000139 PSF35-000138 PSF35-000135 PSF35-000134 PSF35-000111 PSF35-000109 PSF35-000107 PSF22-001538 PSF22-001536 PSBO-002648 PSBO-001129 PSBO-001025 PSF22-001514 PSF22-001513 PSF22-001512 PSF22-001511 PSF22-001510 PSF22-001509 PSF22-001507 PSF22-001506 PSF22-001505 PSF22-001533 PSF22-001532 PSF22-001531 PSF22-001530 PSF22-001529 PSF22-001528 PSF22-001527 PSF22-001525 PSF22-001523 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B A A A A A A A A A A A A A A A A A A Title LMA-MK058, LAMINATED PHENOLIC SHEET, COTTON FABRIC BASE LMA-MK053A, MOLYBDENUM DISULFIDE FILLED NYLON SHEET AND ROD LMA-MK036, LAMINATED ABS SHEET LMA-ML077A, TWO PART POLYURETHANE ADHESIVE LMA-ML076C, ONE PART ROOM TEMP VULCANIZING SILICONE ADHESIVE LMA-ML070B, HIGH TEMP EPOXY PHENOLIC ADHESIVE LMA-ML068A, HIGH PEEL STRENGTH, ROOM OR ELEVATED TEMP CURIN LMA-ML053, COMPOUND, COMPRESSION MOLDING, GLASS FILLED EPOXY LMA-ML049, HIGH TEMP PHENOLIC RESIN LMA-ML045, OVEN CURING EPOXY RESIN FILM LMA-ML032, SILICONE HEAT SINK COMPOUND LMA-ML019B, EPOXY RESIN FOR VARTM APPLICATION LMA-MP004, LUBRICANT, FITTING, FOR COLLANT, ENGINE OIL AND F LMA-MP002, LUBRICANT, LOW-TEMP LMA-MN402, DEOXIDIZER, ACID TYPE LMA-MN307, HAND CLEANING SOLVENTS, LOW VAPOR PRESSURE ADN AQ LMA-MN305, CLEANER, ETCH, ALKALINE, FOR ALUMINUM AND ALUMINU LMA-MN304, CLEANER, ALKALINE, NON-ELECTROLYTIC LMA-MN303, ETCHANT, ALKALINE, FOR ALUMINUM ALLOYS LMA-MN302, CLEANER, EMULSION LMA-MN301, CLEANER, ALKALINE, FOR ALUMINUM AND MAGNESIUM ALL LMA-MN022, AQUEOUS ALKALINE DEGREASER LMA-MN021, AQUEOUS CLEANER, FOR PRECISION CLEANING OF METAL LMA-MN015A, CLEANER, PRE-PAINT CLEANING, LOW VAPOR PRESSURE LMA-MM213, PROMOTER, ADHESION, RUBBER BONDING LMA-MM176A, COMPOUND, MOLD SEALER AND RELEASE AGENT LMA-MM001, WATER BASED ADHESION PROMOTER FOR POLYETHYLENE FO LMA-ML111C, ADHESIVE, EPOXY PASTE, TWO PART LMA-ML078A, FAST SETTING ROOM TEMP CURING EPOXY ADHESIVE LMA-MK010, THERMOPLASTIC SHEET, POLYCARBONATE LMA-MK005, POLYETHERIMIDE MOLDERING RESIN LMA-MK002, EPOXY POTTING COMPOUND LMA-MJ001, FLEXIBLE POLYURETHANE FOAM LMA-MG067A, POLYESTER FABRIC BAC5436 PSD8-22, ETCH INSPECTION OF GROUND OR MACHINED STEEL BAC5004-4 REV A ,ONE SIDED INSTALL BOLTS-INSTALL &INSPEC PS14017 REV V, DEV 2, FORMING OF TITANIUM ALLOYS LMA-MF002, DECALCOMANIA, HIGH HEAT RESISTANCE, OPERATIONS UP LMA-MF001, DECALCOMANIA, POLYESTER, FUEL RESISTANT LMA-ME098, SYNTHETIC ELASTOMER, SPECIAL PURPOSE LMA-ME071, CLOSED CELL SILICONE SPONGE SHEET LMA-ME027D, RUBBER, FLUOROSILICONE, SHEET MOLDED, AND EXTRUD LMA-ME004A, POLYETHER URETHANE, MOLDED LMA-MD403, POLYIMIDE FOAMING ADHESIVE LMA-MD402, HIGH SERVICE TEMP POLYIMIDE FILM ADHESIVE LMA-ME019, CLOSED CELL VINYL FOAM LMA-MG009, HIGH TEMP SILICONE COATED NYLON FABRIC LMA-MG005, CLOTH, SYNTHETIC FIBER, PEEL PLY RELEASE LMA-MG004, WOVEN TEXTILE NYLON WEBBING LMA-MG001, CLOTH, CLEANING, COTTON AND SYNTHETIC LMA-MG000, NYLON CLOTH LMA-MF099, ID TAPE WITH TRANSPARENT PROTECTIVE OVERLAY LMA-MF089A, ELECTRICAL LACING TAPE LMA-MF074B, ELECTRICAL BAR CODE ID TAPE LMA-MF067, SILICONE AND ACRYLIC ADHESIVE PTFE TAPE Issued Date 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/13/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001534 PSF22-001522 PSF22-001521 PSF22-001520 PSF22-001519 PSF22-001518 PSF22-001517 PSF22-001516 PSF22-001515 PSBO-002645 PSBO-002638 PSBO-002637 PSBO-002636 PSBO-002635 PSBO-002634 PSBO-002633 PSBO-001581 PSF22-000035 PSF22-000085 PSF22-001474 PSF22-001475 PSF22-001473 PSF22-001472 PSF22-001476 PSF22-001478 PSF22-001492 PSF22-001491 PSF22-001490 PSF22-001489 PSF22-001487 PSF22-001486 PSF22-001483 PSF22-001482 PSF22-001481 PSF22-001504 PSF22-001503 PSF22-001502 PSF22-001501 PSF22-001500 PSF22-001499 PSF22-001498 PSF22-001497 PSF22-001496 PSF22-001495 PSF22-001494 PSF22-001493 PSF22-001477 PSBO-002594 PSBO-002602 PSBO-002603 PSBO-002598 PSBO-002596 PSBO-002604 PSBO-002607 PSBO-002628 Rev. A A A A A A A A A A A A A A A A C D B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title LMA-MG011, NYLON HOOD AND PILE FASTENER TAPE LMA-MF053, OIL AND HYDRAULIC FLUID RESISTANT ADHESIVE BACKED LMA-MF047C, ALUMINUM FOIL TAPE, ACRYLIC OR SILICONE ADHESIVE LMA-MF031, HEAT SHRINKABLE ELECTRICAL ID TAPE LMA-MF025, MATERIALS, RAIN EROSION RESISTANT TAPE LMA-MF014C, DOUBLE BACKED ADHESIVE TAPE LMA-MF013, INSULATION TEDLAR TAPE LMA-MF006, DECAL MATERIAL FOR AIRCRAFT APPS LMA-MF005B, DECALCOMANIA FOR ITEM UNIQUE ID MMS446 REV G, CORROSION-RESISTANT ELASTOMERIC SHEET 7M850 REV A, CONNECTOR ASSEMB- ANTI G-SUIT, FEMALE 7M684 REV C, HOSE ASSEMBLY- NON- METALLIC, LOW PRESSURE PB12-289 REV C, AMD TO PS22210 REV K, ARC FUSION WELDING 5M2919 REV J, CONNECTOR ACCESSORY, BACKSHELL, STRAIGHT, STRA PS11342 REV R, CHANNEL SEALING INTEGRAL FUEL TANKS ST5M1331 REV E, ADAPTER-TUBING TO ELECTRICAL CONNECTOR PB10-695 REV B, AMENDMENT TO P.S. 20101 PROTECTION OF ACRY 5PTMRT03-D MATERIAL SPEC LOW DENSITY WATERBORNE EPOXY PR 5PTMRT03-QPL-2 LOW DENSITY WATERBORNE EPOXY PRIMER LMA-MB009, PREPREG, E GLASS FABRIC, POLYIMIDE RESIN IMPREGNA LMA-MB010A, PREPREG, GRAPHITE FABRIC AND COPPER MESH LMA-MB008B, PREPREG, FABRIC, WOVEN EPOXY RESIN IMPREGNATED LMA-MB007A, PREPREG, E-GLASS FABRIC, WOVEN EPOXY RESIN IMPRE LMA-MB011A, PREPREG, GRAPHITE FABRIC AND COPPER MESH LMA-MB014, FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN IMPREGNA LMA-MC400, Z-PINNING LMA-MC009, RESIN TRANSFER MOLDED PARTS LMA-MC007, FIBERS AND FABRICS, CARBON, STANDARD AND INTERMED LMA-MC005, BRAIDED CARBON FIBER ROPE LMA-MB401, EPOXY IMPREGNATED ASTROQUARTZ III FABRIC LMA-MB400, QUARTZ FABRIC, EPOXY MATRIX PREPREG MATERIAL LMA-MB024A, PHENOLIC RESIN PREIMPREGNATED MATERIALS LMA-MB023, WOVEN GLASS EPOXY FABRIC LMA-MB021, FABRIC, CARBON FIBER EPOXY PREPREG LMA-MD401, CORE, HONEYCOMB, FIBERGLASS BASE, POLYIMIDE COATE LMA-MD102A, ALUMINUM HONEYCOMB CORE MATERIAL-5052 ALLOY LMA-MD101, FLEXIBLE 5052 ALLOY ALUMINUM HONEYCOMB CORE LMA-MD083, MODIFIED EPOXY PHENOLIC ADHESIVE FILM. LMA-MD022, GLASS REINFORCED PHENOLIC HONEYCOMB CORE LMA-MD019, HEAT EXPANDING ADHESIVE SPLICE MATERIAL FOR HONEY LMA-MD017C, CORE, HONEYCOMB, FIBROUS HIGH-MODULUS PARA-ARAMI LMA-MD013, CORE, HONEYCOMB, FIBROUS ARAMID BASE LMA-MD007A, ADHESIVE, MODIFIED EPOXY FILM LMA-MD004, TITANIUM HONEYCOMB CORE MATERIAL LMA-MD003B, ADHESIVE-HONEYCOMB CORE SPLICING LMA-MD002A, HEAT EXPANDING ADHESIVE, BISMALEIMIDE LMA-MB013, FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN TACKIFIE BMS7-373A, COPPER NICKEL TIN ALLOY BAR BAC5974 PSD6-26, FUSION WELDING OF GIRTH JOINTS IN SYSTEMS T BAC5974 REV P, FUSION WELDING OF GIRTH JOINTS IN SYSTEMS TUB BDS-641 REV C, MODEL BASED DEFINITION-SHEET METAL PARTS BMS7-306J, HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY BAC5974 PSD9-10, FUSION WELDING OF GIRTH JOINTS IN SYSTEMS T BAC5875 PSD6-8, FABRICATION OF ALUMINUM FOR MARKERS BAC5064 PSD6-34, INSTALL OF INSERTS, PANEL FASTENERS ADN REL Issued Date 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/12/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/11/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002626 PSBO-002625 PSBO-002624 PSBO-002623 PSBO-002622 PSBO-002619 PSBO-002618 PSBO-002617 PSBO-002615 PSBO-002614 PSBO-002613 PSBO-002611 PSBO-002610 PSBO-002609 PSF22-001470 PSF22-001468 PSF22-001466 PSF22-001465 PSF22-001464 PSF22-001461 PSF22-001460 PSF22-001458 PSF22-001457 PSF22-001456 PSF22-001455 PSF22-001454 PSF22-001453 PSF22-001452 PSF22-001451 PSF22-001450 PSF22-001449 PSF22-001448 PSF22-001446 PSF22-001445 PSF22-001443 PSF22-001442 PSF22-001441 PSF22-001440 PSF22-001439 PSF22-001438 PSF22-001436 PSF22-001435 PSF22-001434 PSF22-001432 PSF22-001431 PSF22-001430 PSF22-001429 PSF22-001428 PSF22-001427 PSF22-001426 PSF22-001425 PSBO-002606 PSBO-000766 PSBO-002557 PSBO-002554 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A Title BAC5332 PSD6-20, INSTALL OF MOLDABLE PLASTIC SHIM BAC5332 PSD6-17, INSTALL OF MOLDABLE PLASTIC SHIM BAC5332 PSD6-12, INSTALL OF MOLDABLE PLASTIC SHIM BAC5332 PSD6-3, INSTALL OF MOLDABLE PLASTIC SHIM BAC5332 REV A, INSTALL OF MOLDABLE PLASTIC SHIM BAC5514 PSD9-18, COMMON BONDING REQMTS FOR STRUCTURAL ADHESI BAC5514 PSD9-12, COMMON BONDING REQMTS FOR STRUCTURAL ADHESI BAC5514 PSD6-218, COMMON BONDING REQMTS FOR STRUCTURAL ADHES BAC5514 PSD6-208, COMMON BONDING REQMTS FOR STRUCTURAL ADHES BAC5514 PSD6-205, COMMON BONDING REQMTS FOR STRUCTURAL ADHES BAC5514 REV AP, COMMON BONDING REQMTS FOR STRUCTURAL ADHESIV BAC5666 PSD6-2, FUSION WELDING OF GIRTH JOINTS BAC5666, FUSION WELDING OF GIRTH JOINTS BAC5875 PSD9-3, FABRICATION OF ALUMINUM FOR MARKERS LMA-MB003B, THREE-DIMENSIONAL WOVEN PREFORMS, FOR PRIMARY AI LMA-MA012, TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED. LMA-M8003A, TITANIUM ALLOY TUBING, SEAMLESS,HYDRAULIC QUALIT LMA-M8002, TUBING, TITANIUM, WELDED LMA-M7097A, 2297-T87, ALUMINUM ALLOY PLATE LMA-M7013B, ALUMINUM ALLOY 7475 SHEET AND PLATE LMA-M7009C, ALUMINUM ALLOY PLATE LMA-M7003A, TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE, LMA-M7002, CLOSE THICKNESS TOLERANCES FOR ALUMINUM ALLOYS LMA-M7001, TITANIUM ALLOY SHEET, TI-6AL-4V, FOR MULTI-SHEET LMA-M6003A, TITANIUM ALLOY HAND FORGINGS GREATER THAN 5.00 I LMA-M6002, COPPER NICKEL TIN ALLOY, BARS AND RODS, 77 CU-15 LMA-M5006, TITANIUM ALLOY FORGINGS LMA-M5001, ALUMINUM ALLOY DIE FORGINGS 7050-01, HIGH TEMP LMA-M4010B, ALUMINUM ALLOY EXTRUDED SHAPES LMA-M3001A, TITANIUM ALLOY CASTINGS TI 6AI-4V VACUUM MELTED, LMA-M1017, HIGH TEMP BRAIDING THREAD LMA-M1004, DATA BUS CABLE LMA-D0037, QUALIFICATION OF SOLID CONCEPTS TO LMA-PL019 LMA-D0032, APPN LAMINATED SHIM STOCK REQUIREMENTS LMA-D0030 QUALIFICATION OF SHULTZ STEEL COMPANY PRODUCED DIE LMA-D0027, QUALIFICATION OF CYTEC CYANATE ESTER PREPREG CYCO LMA-D0026, QUALIFICATION TESTING REPORT AND PROCEDURES FOR LMA-D0025, QUALIFICATION OF EMERSON AND CUMING SID 800 GLASS LMA-D0024, QUALIFICATION OF MO-SCI SPECIALTY PRODUCTS GLLMA-D0023A, UNIQUE ITEM ID CONSTRUCTION GUIDELINES LMA-D0021, SWAGING PART AND TOOLING NUMBERS LMA-D0020B, QUALIFICATION REPORT OF UNIQUE ID SERVICE PROVID LMA-D0019, QUALIFICATION OF CYTEC OF CYANATE ESTER PREPREG LMA-D0017C, STANDARD AND OVERSIZE EXPANDED INSTALL BUSHING LMA-D0016 QUALIFICATION OF HOWMET WHITEHALL PRODUCED INGOT LMA-D0014A, TEST REQUIREMENTS FOR NEW OR ALTERNATE SOURCES LMA-D0013, QUALIFICATION OF KAISER ALUMINUM FOR PRODUCING LMA-D0012 QUALIFICATION OF ALCOA DAVENPORT FOR PRODUCING LMA-D0011, QUALIFICATION OF PECHINEY RAVENSWOOD FOR PRODUCIN LMA-D0004, METALLIC TEST COUPONS AND PROCEDURES LMA-D0002, TEST PLAN TO QUALIFY COMP MATERIALS BAC5875 PSD6-5, FABRICATION OF ALUMINUM FOR MARKERS D37520-1B REV J, SUPPLIERS' PART PROTECTION GUIDE BDS-209 D-01 MESA, PRODUCT DEFINITION STANDARD DEPARTURE BACN10JS REV V, NUT, PLATE, SELF-LOCKING, FLOATING Issued Date 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/10/2010 5/6/2010 5/6/2010 5/6/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002548 PSBO-002559 PSBO-002561 PSBO-002564 PSBO-002582 PSBO-002579 PSBO-002578 PSBO-002577 PSBO-002574 PSBO-002573 PSBO-002572 PSBO-002571 PSBO-002567 PSBO-002566 PSBO-002562 PSBO-002560 PSBO-002522 PSBO-002528 PSBO-002530 PSBO-002532 PSBO-002540 PSBO-002542 PSF22-000362 PSF22-000091 PSBO-002545 PSBO-002544 PSBO-002543 PSBO-002541 PSBO-002536 PSBO-002531 PSF22-001373 PSF22-001372 PSF22-001371 PSF22-001370 PSF22-001369 PSF22-001368 PSF22-001367 PSF22-001366 PSF22-001365 PSF22-001390 PSF22-001389 PSF22-001388 PSF22-001387 PSF22-001386 PSF22-001385 PSF22-001384 PSF22-001383 PSF22-001382 PSF22-001407 PSF22-001406 PSF22-001405 PSF22-001404 PSF22-001403 PSF22-001402 PSF22-001401 Rev. A A A A A A A A A A A A A A A A A A A A A A B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title BAC5312 PSD6-39, APP OF PLASTIC FILM MARKERS BDS-500 REV B, DRAWING SHEET SIZE AND FORMAT BDS-500 D-03A BCA, PRODUCT DEFINITION STANDARD DEPARTURE BMS10-107, WATER BASED SCREEN PRINTING INKS BMS8-297H, EPOXY PREIMPREGNATED CARBON TAPE BACS18AX REV E, SPACER, POLYAMIDE (NYLON). BACH30AU REV M, HOSE ASSEMBLY, NON-METALLIC, FLARELESS, MEDI BAC5667 PSD6-1, APP OF SOL-GEL COATING BAC5320 REV B, HYDRAULIC SYSTEM CONTAMINATION LEVEL BAC5117-12 PSD6-3, ELECTRICAL BONDING- BULKHEAD BAC5117-12 PSD6-2, ELECTRICAL BONDING-BULKHEAD BAC5117-12 REV C, ELECTRICAL BONDING-BULKHEAD D32101-2 REV V, GENERAL PLASTIC TOOLING INFORMATION BPS-D-213 REV A, DUCTS, AIR, FLEXIBLE AND SEMI RIGID NON MET BMS8-317A, POLYETHER ETHER KETONE BDS-500 D-02A MESA, PRODUCT DEFINITION STANDARD DEPARTURE BSS7002 SSD8-10, STORAGE OF TIME AND TEMP SENSITIVE MATERIAL BDS-642 REV B, MODEL BASED DEFINITION- CASTINGS AND FORGINGS BDS-610 REV D, MODEL BASED DEF, ABBREV, ACRONYMS, AND DEFINI BDS-300 REV B, DRAWINGS IN BOOK FORM BAC5435 PSD6-62, BEARING INSTALL AND RETENTION ST5M1223 REV R, LIGHT, LANDING 5PTPCG07-B, REQUIREMENTS FOR MAGNETIC PARTICLE INSPECTION 5PTPCG06-D, REQUIREMENTS FOR PENETRANT INSPECTION PRECEDURES PS21271 REV B, CAPACITANCE HOLE MEASUREMENT 7M495 REV C, ELBOW, TUBE -45 DEG, SWAGELOK 5M2866 REV C, RELAY, ELECTROMAGNETIC, HERMETICALLY SEALED AS126275THRAS126586 REV B, BOEING SUPP, BACW10EJ REV A, WASHER, NUT BASE, SELF-ALIGNING, 450F BDS-610 D-02 MESA, PRODUCT DEF STANDARD DEPARTURE 5PTV5604 REV D, MOUNT, SHOCK VIBRATION - ELASTOMERIC 5PTV5603 REV C, MOUNT, SHOCK VIBRATION ELASTOMERIC 5PTV5602 REV D, FILTER, ELECTRICAL, POWER, 28 VDC 5PTV5601 REV E, MOUNT, SHOCK VIBRATION ELASTOMERIC 5PTV5515, VALVE, MANUAL - HYDRAULIC, 4000 PSI 5PTV5514 REV F, COUPLING ASSEMBLY- QUICK DISCONNECT, 5PTV5513 REV D, COUPLING ASSEMBLY- QUICK DISCONNECT 5PTV5512 REV F, VALVE, HYDRAULIC- ISOLATION 5PTV5511 REV F, SWIVEL, BRAKE- DUAL PASSAGE 5PTV6001 REV H, CONNECTOR, PLUG CABLE ASSY 5PTV5823 REV B, RFI AY, FI FCTROMAGNFTIC 5PTV5822 REV B, RELAY, ELECTROMAGNETIC DPDT 5PTV5821 REV B, CONNECTOR, CIRCULAR, ELEC, RCPT, FLANGE MT 5PTV5820 REV A, HARDWARE KIT - DIODE MOUNTING 5PTV5818 REV A, LABEL, WARNING, MODULE. 5PTV5817 REV B, GASKET, CONDUCTIVE, RACK FILTER ASSEMBLY. 5PTV5816 REV A, GASKET, CIRCULAR CONNECTOR, CONDUCTIVE 5PTV5815 REV H, CONNECTOR, CIRCULAR, ELECT, RECEPTACLE, FLAN 5PTV7021 REV A, PIN, INDEX 5PTV7016 REV K, CLAMP, BAND, SES BOTTLE 5PTV7015 REV H, BEARING, SPHERICAL, INTEGRAL SHAFT. 5PTV7014 REV F, BEARING, SPHERICAL, SEALED 5PTV7012 REV G, BEARING, SPHERICAL ROLLER 5PTV7011, BEARING, SPHERICAL ROLLER, ROD END 5PTV7009 REV F, NUT ASSEMBLY, DOME, SELF-SEALING, FLOATING, Issued Date 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/6/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001400 PSF22-001399 PSF22-001424 PSF22-001423 PSF22-001422 PSF22-001421 PSF22-001420 PSF22-001419 PSF22-001418 PSF22-001417 PSF22-001416 PSF22-001415 PSF22-001414 PSF22-001413 PSF22-001412 PSF22-001411 PSF22-001410 PSF22-001409 PSF22-001408 PSF22-001398 PSF22-001397 PSF22-001396 PSF22-001395 PSF22-001394 PSF22-001393 PSF22-001392 PSF22-001391 PSF22-001381 PSF22-001380 PSF22-001379 PSF22-001378 PSF22-001377 PSF22-001376 PSF22-001375 PSF22-001374 PSBO-002529 PSBO-002526 PSBO-002525 PSBO-002524 PSF22-001244 PSF22-001247 PSF22-001249 PSF22-001251 PSF22-001260 PSF22-001259 PSF22-001258 PSF22-001257 PSF22-001256 PSF22-001255 PSF22-001254 PSF22-001253 PSF22-001252 PSF22-001269 PSF22-001268 PSF22-001267 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTV7008 REV G, NUT, JAM, SELF-LOCKING BULKHEAD 5PTV7007 REV G, PIN, EXPANDABLE DIAMETER, LRU 2, MLG 5VP71266 REV D, PIN, EXPANDABLE DIAMETER5VP71209 REV J, PIN, EXPANDABLE DIAMETER5PTV7119 REV C, TRANSDUCER ASSEMBLY, PRESSURE 5PTV7117 REV A, INDUCTOR. 5PTV7112 REV B, WHEEL WELL CONNECTOR 5PTV7111 REV B, F22 PYLON CONNECTOR 5PTV7110 REV A, PYLON CONNECTOR 5PTV7109 REV J, F22 CRYOFIT COUPLERS 5PTV7108 REV B, PYLON CONNECTOR 5PTV7107 REV D, BACKSHELL, COMP, EMI SHIELD SOCK 5PTV7106 REV D, BACKSHELL, COMP, EMI SHIELD SOCK, 45 DEG 5PTV7105 REV F, BACKSHELL, COMP, EMI SHIELD SOCK, STRAIGHT 5PTV7036 REV C, PIN, EXPANDABLE DIAMETER, DROP-OUT LINK, AFT 5PTV7029 REV A, DOME NUT, REDUCED O-RING 5PTV7028 REV C, RETAINER, RIVETLESS, WITH CHAMFER 5PTV7027 REV B, PIN, EXPANDABLE DIAMETER, LINE REPLACEABLE U 5PTV7023, RETAINER, RIVETLESS, MISC GRIPS, SEALING STYLE 5PTV7006 REV F, BEARING, SPHERICAL, ENGINE MOUNT 5PTV7005 REV N, BULKHEAD FITTING - REPAIRABLE 5PTV7004 REV B, FITTING, BULKHEAD REPAIRABLE, PORT 5PTV7003 REV W, PIN, EXPANDABLE DIAMETER- DROP-OUT LINK 5PTV7002 REV E, NUT ASSEMBLY, SELF-LOCKING 5PTV7001 REV A, NUT ASSEMBLY, FLOATING, FLAT BEAM LOCK 5PTV6201 REV B, FILTER, ELECTRICAL, POWER, RACK 5PTV6002 REV C, CONNECTOR, PLUG CABLE ASSY, 5PTV5814 REV C, SCREW, PAN HEAD, CROSS RECESSED 5PTV5813, CONTACT, COAXIAL 5PTV5812 REV D, CONNECTOR, ELECTRICAL BACKPLANE 5PTV5811 REV C, MOUNT, SHOCK VIBRATION ELASTOMERIC, PEDESTAL 5PTV5808 REV D, FILTER, ELECTRICAL, POWER, AVIONICS RACK 5PTV5807, RELAY, HYBRID-DPDT, TRANSISTOR DRIVEN 5PTV5801 REV H, RELAY, SOLID STATE- SURFACE MOUNT 5PTV5605 REV C, JUMPER, GROUNDING BDS-640 REV B, MODEL BASED DEF- MACHINED PARTS BMS5-162, SOL-GEL COATING FOR STRUCTURAL METAL BONDING. BMS7-351 QPL REV B BMS7-351, 15-5PH CORROSION RESISTANT BAR 5PTD3183 REV C, KEYWAYS, EXTERNALLY THREADED SHAFT 5PTD3186 REV A, HOLE, SLOTTED AND RECTANGULAR 5PTD3300 REV C, CUTOUT - SINGLE HOLE MOUNTING, SWITCH AND RH 5PTD3302, INSTALL AND CUTOUT DETAILS, CANOPY DOWN SWITCH 5PTD7001, FLANGED HOLES- ROUND, PUNCH PRESS 5PTD4452 REV A, SERRATIONS STRAIGHT - 60 DEG, FLAT SURFACE 5PTD4451, STD-BLOCK CLAMP DESIGN CRITERIA FOR CONFIG DEF 5PTD4450 REV B, END FITTING - WELD JOINT 5PTD4405, CUTOUT, CONNECT- ELECTRICAL, BACK PANEL MOUNTING 5PTD4401 REV B, CUTOUT, COAX- CONNECTORS 5PTD4400 REV B, CONTACT - COAX MULTI - PORT STANDARD DIMENSI 5PTD4001, EXTRUSION, ALTERNATE MFG METHOD 5PTD4000 REV A, END FITTING - FLEXIBLE COUPLING, STD DIMENSI 5PTN1003 REV B, HINGLE, BUTT, STRUCTURAL, EXTRUDED 5PTN1002 REV A, RING, RETAINING, SPIRAL, 2 TURNS, SLOTTED EN 5PTN1001 REV A, SEAL, GROOVED PLUS SEAL II Issued Date 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/5/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001266 PSF22-001265 PSF22-001264 PSF22-001263 PSF22-001262 PSF22-001261 PSF22-001286 PSF22-001285 PSF22-001284 PSF22-001283 PSF22-001282 PSF22-001281 PSF22-001280 PSF22-001279 PSF22-001278 PSF22-001364 PSF22-001363 PSF22-001362 PSF22-001361 PSF22-001360 PSF22-001359 PSF22-001358 PSF22-001357 PSF22-001356 PSF22-001355 PSF22-001354 PSF22-001353 PSF22-001352 PSF22-001351 PSF22-001350 PSF22-001349 PSF22-001348 PSF22-001347 PSF22-001346 PSF22-001345 PSF22-001344 PSF22-001343 PSF22-001342 PSF22-001341 PSF22-001340 PSF22-001339 PSF22-001338 PSF22-001337 PSF22-001336 PSF22-001335 PSF22-001334 PSF22-001333 PSF22-001332 PSF22-001331 PSF22-001330 PSF22-001329 PSF22-001328 PSF22-001327 PSF22-001326 PSF22-001325 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTN0002 REV B, PLUG, ELECTRICAL 5PTN0001 REV NC, PLUG, RECTANGULAR 5PTN0000 REV C, BACKSHELLS, CONNECTOR, ELECTRICAL 5PTD7047, HOLES, SLOTTED AND NOTCHED, PIERCED 5PTD7023, SERRATIONS, FLAT PARALLEL 5PTD7010, FLANGED HOLES - ROUND, PUNCH PRESS 5PTN7006 REV B, INSERT, REMOVABLE CONTACT, CONNECT 5PTN7005 REV B, HOSE ASSEM, CONVOLUTED 5PTN7004 REV A, FITTING ASSEM, TEE, REDUCER 5PTN7003 REV A, ELBOW, 90 DEG FEMALE BEAM SEAL 5PTN7002 REV A, FITTING ASSEMBLY, ELBOW 90 DEG FEMALE BEAM S 5PTN7000 REV A, ELBOW, 90 DEG, WELD TO FEMALE BEAM SEAL 5PTN5804, RECEPTACLE, COMP, LESS CONTACTS 5PTN5803, CABLE, DIFFERENTIAL, 100 OHM 5PTN5802, WAFER, EMI FILTER 5PTV5509 REV D, VALVE, BLEED - HYDRAULIC 5PTV5508 REV B, VALVE, CHECK- HYDRAULIC, 4000 PSI. 5PTV5507 REV B, TRANSDUCER, PRESSURE - HYDRAULIC 5PTV5506 REV B, SWITCH, PRESSURE - HYDRAULIC, 5000 PSI 5PTV5505 REV D, GAUGE - PNEUMATIC PRESSURE 5PTV5501 REV E, FILTER, PNEUMATIC - EMERGENCY LANDING GEAR E 5PTV5500 REV E, COUPLING, V-FLANGE - ACCESSORY MOUNTING 5PTV5409 REV D, HOSE ASSY - HYDRAULIC, PUMP SUCTION 5PTV5408 REV D, HOSE ASSY - HYDRAULIC 5PTV5407 REV C, ADAPTER, COMP BULKHEADS 5PTV5406 REV D, ADAPTER, BULKHEAD 5PTV5405 REV D, ADAPTER, COMP BULKHEADS 5PTV5404 REV E, ADAPTER, BULKHEAD5PTV5403 REV C, UNION, BULKHEAD 5PTV5402 REV E, UNION, 4000 PSI 5PTV5401 REV G, UNION, 4000 PSI 5PTV5221 REV A, CONNECTOR, PLUG, THREADED COUPLING 5PTV5219 REV G, CONNECTOR, ELECTRICAL MOUNTING DEVICE 5PTV5217 REV F, CONNECTOR, PLUG, TITANIUM 5PTV5214 REV D, CONNECTOR, RECEPTACLE- ELECTRICAL, EXT REACH 5PTV5212 REV D, STANDOFF- COAX MULTI - PORT 5PTV5211 REV A, SPRING- COAX MULTI- PORT 5PTV5210 REV E, PLUG, FUEL - COAX, MULTI - PORT HOUSING 5PTV5209 REV A, RING, RETAINING - COAX MULTI - PORT 5PTV5208 REV A, PORT, SEALER- COAX MULTI - PORT 5PTV5207 REV J, COUPLER, ISOLATION TRANSFORMER 5PTV5205 REV H, CONNECTOR, RECEPTACLE - ELECTRICAL, EXT REAC 5PTV5204 REV C, CONNECTOR, RECEPTACLE- ELECTRICAL, EXT REACH 5PTV5203 REV G, HOUSING, PLUG- MULTI-PORT 5PTV5202 REV G, RECEPTACLE, HOUSING MULTI-PORT 5PTV5201 REV C, CONNECTOR, RECEPTACLE5PTV4902, CONNECTOR, ELECTRICAL, RECTANGULAR, 5PTV4901, CONNECTOR, ELECTRICAL, RECTANGULAR. 5PTV4811 REV C, CONNECTOR, RECEPTACLE ELECTRIC, EXTERNAL POW 5PTV4810 REV E, MOUNT, SHOCK VIBRATION 5PTV4809 REV D, MOUNT, SHOCK VIBRATION 5PTV4808 REV A, DIODE, RECTIFIER, POWER, STANDARD RECOVERY 5PTV4807 REV D, DIODE, RECTIFIER, POWER, FAST RECOVERY SWITC 5PTV4806 REV C, MODULE, TRANSIENT VOLTAGE SUPPRESSOR, UNIDIR 5PTV4805 REV A, BUS BARS-FLEXIBLE Issued Date 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001324 PSF22-001323 PSF22-001322 PSF22-001321 PSF22-001319 PSF22-001318 PSF22-001317 PSF22-001316 PSF22-001315 PSF22-001314 PSF22-001312 PSF22-001311 PSF22-001310 PSF22-001309 PSF22-001308 PSF22-001307 PSF22-001306 PSF22-001305 PSF22-001304 PSF22-001303 PSF22-001302 PSF22-001301 PSF22-001300 PSF22-001299 PSF22-001298 PSF22-001297 PSF22-001296 PSF22-001295 PSF22-001294 PSF22-001293 PSF22-001292 PSF22-001291 PSF22-001290 PSF22-001289 PSF22-001288 PSF22-001287 PSF22-001277 PSF22-001276 PSF22-001275 PSF22-001274 PSF22-001273 PSF22-001272 PSF22-001271 PSF22-001270 PSF22-001250 PSF22-001248 PSF22-001246 PSF22-001245 PSF22-001225 PSF22-001231 PSF22-001233 PSF22-001235 PSMR-000016 PSF22-001243 PSF22-001242 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A Title 5PTV4804, MOUNT, SHOCK VIBRATION-ELASTOMERIC 5PTV4803 REV C, CIRCUIT BREAKER, -THREE-PHASE 5PTV4802 REV D, CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL 5PTV4801 REV E, RELAY, ELECTROMAGNETIC TY 1 SEALED 5PTV4404, SWITCH, LIMIT, THREE POLE, SEALED, RECEPTACL 7 AMP 5PTV4403, SWITCH ASSY, LIMIT, SINGLE POLE, SEALED, RECPT, 7 5PTV4402, SWITCH, LIMIT, SINGLE POLE, SEALED, RECEPTACL 5PTV4401, SWITCH, LIMIT, DOUBLE POLE, SEALED, RECEPTACL . 5 5PTV4214, HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC WIRE REINFOR 5PTV4213, FITTING, 06TY0655 5PTV4211 REV A, RESTRAINT, CABLE - MODULE IV CROSSOVER 5PTV4210 REV A, IRCM DOOR ROD ARMS 5PTV4208 REV A, INSERT - HOIST 5PTV4207 REV B, BOLT, HEX HEAD, INCREASED LONG THREAD 5PTV4206 REV B, BOLT, 130 DEG HEAD, FLUSH SIX LOBE RECESS 5PTV4205 REV C, BOLT, 100-DEG FLUSH HEAD, SIX LOBE, INCREASE 5PTV4204 REV B, SEAL, BULB. 5PTV4203 REV A, INSULATOR, ROUND - SINGLE BORE 5PTV1516 REV B, MOUNT, SOFT, IAR SUPPORT 5PTV1512 REV C, BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW R 5PTV1511 REV C, GROMMET, EDGING, NYLON, BLACK 5PTV1502 REV A, SPRING, EXTENSION 5PTV1501 REV C, FASTENER, POSITIVE MECH LOCK 5PTV0520 REV A, RESISTOR, FIXED, WIREWOUND, POWER THREADED T 5PTV0519 REV A, SWITCH, LEVER LOCK TOGGLE, 2 POLE 5PTV0517 REV B, GENERAL REQUIREMENTS, WEAPONS BAY LIGHT ASSE 5PTV0515 REV B, SWITCH, POSITIONS SENSING, 2PDT, MODIFIED PL 5PTV0514 REV D, SWITCHES, PUSH BUTTONE, ILLUMINATED, SUNLIGH 5PTV0513 REV C, SWITCH, PROXIMITY, ONE PIECE, SPST 5PTV0512 REV C, SWITCH, PROXIMITY, ONE PIECE, DUAL OUTPUT 5PTV0511 REV B, SWITCH, POSITION SENSING, 2PDT 5PTV0510 REV C, SWITCHES, POSITION SENSING W HERMETICALLY SE 5PTV0509 REV D, SWITCH ASSEMBLY, TOGGLE 5PTV0506 REV A, SWITCHES, SENSITIVE, PLUNGER ACTUATED, RESIL 5PTV0505 REV G, SWITCH, TOGGLE, SOLENOID HELD SPECIAL CIRCUI 5PTV0502 REV D, SWITCH, PROXIMITY, ONE PIECE, DUAL OUTPUT. 5PTN5801, OSCILLATOR, SURFACE MOUNT, LEADLESS CHIP CARRIER 5PTN5601, STRAIN GUAGE5PTN5205, BACKSHELL, 90 DEG 5PTN5204 REV C, ADAPTER 5PTN5202 REV B, CONNECTOR, RECEPTACLE 5PTN5201, CONNECTOR, RECEPTACLE 5PTN4401 REV A, COVER, PROTECTIVE 5PTN4000 REV A, SENSOR, PRESSURE 5PTD3301 REV B, INSTALL AND CUTOUT DETAILS 5PTD3187 REV A, INSTALL, AIR CHECK VALVES 5PTD3185 REV A, CUTOUT - HARTWELL H601 LATCH 5PTD3184 REV B, INSTALL, FLARED TUBE FITTINGS 5PTC7019 REV D, WASHERS, MICS 5PTC7027, RADIUS BLOCK 5PTD3033 REV B, CUT-OUT LIGHT PANEL CONNECTOR 5PTD3155 REV B, COUNTERSEAL, DIMENSIONS FOR STP-75P108, REV C 5PTD3179 REV A, PLATE - ID ARROWHEAD 5PTD3167 REV A, SERRATION Issued Date 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/4/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001241 PSF22-001240 PSF22-001239 PSF22-001238 PSF22-001237 PSF22-001236 PSF22-001234 PSF22-001232 PSF22-001230 PSF22-001227 PSF22-001228 PSF22-001229 PSF22-001226 PSBO-002511 PSBO-002512 PSBO-002514 PSBO-002484 PSBO-002488 PSBO-002490 PSBO-002494 PSBO-002499 PSBO-002503 PSF22-000766 PSBO-002509 PSBO-002508 PSBO-002504 PSBO-002501 PSBO-002495 PSBO-002492 PSBO-002481 PSSA-000350 PSSA-000347 PSSA-000344 PSBO-002482 PSSA-000338 PSSA-000341 PSSA-000343 PSSA-000342 PSBO-001027 PSBO-002475 PSBO-002477 PSBO-002479 PSBO-002480 PSBO-002478 PSBO-002476 PSBO-002453 PSBO-002454 PSBO-002455 PSBO-002466 PSBO-002470 PSBO-002116 PSBO-002451 PSBO-002450 PSSA-000288 PSSA-000290 Rev. A A A A A A A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A C A A A A A A A A A A A B A A A A Title 5PTD3166 REV A, INSTALL, SWAGED FERRULE 5PTD3165 REV A, INSTALL, RIGID COUPLING, AS1731 TYPE I SERIE 5PTD3161 REV P, INSTALL, FLARELESS TUBE FITTINGS 5PTD3159 REV B, DESIGN STANDARD, TUBE CONNECTION 5PTD3158 REV B, SERRATION 5PTD3156 REV A, LEE PLUG, INSTALL OF 5PTD3034, CUTOUT - RF PANEL RECEPTACLE 5PTD3031 REV A, CUTOUT, ELECTRICAL, RECEPTACLE 5PTC7025, SLEEVE, FASTENER, INCONEL 718. 5PTC7021 REV C, BOLT, HEX HEAD, SERRATED THREADS 5PTC7022 REV A, BOLT, HEX HEAD, SHOULDER, SERRATED THREADS 5PTC7024 BOLT, MISC 5PTC7020 REV A, BOLT, HEX HEAD, SERRATED THREADS MMS908 REV G, CANCELLATION NOTICE 3M303 REV AH, FASTENER-SLEEVE BOLT ST5M1468 REV H, KNOBS- CONCENTRIC, ILLUMINATED D33121-1 REV H, INDEX TO T CODED JOGGLE TOOLS BSS7617 SSD6-6, ELECTRICAL BONDING AND GROUNDING, EMPLOYEE C BACW10EY, WASHER, NUT BASE, SELF-ALIGNING BAC5004-2 PSD8-13, PERM STRAIGHT SHANK FASTENER INSTALL BAC5004-2 PSD9-27, PERM STRAIGHT SHANK FASTENER INSTALL BACS18BB REV B, SPACER, COMP SLEEVE, SCREW AND BOLT 5PTMRL07-H-A06, EXTERIOR COATING BSS7002 SSD8-11, STORAGE OF TIME AND TEMP SENSITIVE MATERIAL BAC5064 PSD8-11, INSTALL OF INSERTS, PANEL FASTENERS BACD2007 REV U, DRAW FORMED TUBING TEE BAC5527 PSD6-19, APP OF SECONDARY FUEL BARRIER BAC5004-2 PSD6-82, PERM STRAIGHT SHANK FASTENER INSTALL BAC5250 REV C, APP OF EXTERIOR SELECTIVELY REMOVABLE MMS701 REV K, CORE MATERIAL SS8706 REV 02 DEV 01, TITANIUM PARTS, LOCAL BLENDING OF SS9152/PP1001, DETERMINATION OF GLASS TRANSITION TEMP BY DMA SS9217 REV 00 AMD 01, KEVLAR HONEYCOMB CORE MMS701 ADDENDUM 1 REV G SS9638 REV 0 AMD 4, PERFORATED COPPER AND STAINLESS STEEL S SS9574 REV 03 AMD 01, CLOTH, GLASS, FINISHED, FOR PLASTIC LA SS9217, KEVLAR HONEYCOMB CORE SS9574 REV 03 AMD 02, CLOTH, GLASS, FINISHED, FOR PLASTIC LA PS14216 REV AC EDGE ATTACHMENT BONDING OF ACRYLIC AND POLYCA 3M1313 REV A, RECEPTACLE - TWO LUG, FLOATING 7M737 REV C, CONN, TUBE- STRAIGHT THREAD BOSS 9M952 REV A, PLUNGER, NYLON BALL- CRES BODY, FINE THREAD 29M105 REV E, PANSTOCK INVENTORY CONTROL LABEL, BAR CODED 9M187 REV H, RING, RETAINING- EXTERNAL, SPIROLOX 5M1817 REV F, CONN, PLUG, ELECTRICAL, THREADED COUPLING DPS10.921 REV C, SUPERPLASTIC FORMING TITANIUM D33181-14B REV BR, GRIT STRIPS FOR LM'S TO STABILIZE NON-MET D32102-2 REV AE, GEL COATS BAC5004-3 PSD9-23, BLIND FASTENER INSTALLATION BAC5008 PSD9-25, APP OF LUBRICANTS PS16010.1 REV J, FLUID LINES; IDENTIFICATION OF DPS 3.22-17 5M1709 REV E, CONNECTOR, COAXIAL, RF-PLUG, STRAIGHT PS12305 REV F, PARTS AND ASSEMBLIES, FLUID CARRYING, CAPPING SS9170/204 REV 01, EMM CLEANERS FOR METALS AND COMP PARTS CL SS9170/381, EMM TONGUE DEPRESSORS CLASS Issued Date 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 5/3/2010 4/28/2010 4/28/2010 4/28/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/23/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/22/2010 4/21/2010 4/21/2010 4/21/2010 4/21/2010 4/21/2010 4/21/2010 4/21/2010 4/20/2010 4/20/2010 4/20/2010 4/20/2010 4/20/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000292 PSSA-000295 PSSA-000326 PSSA-000325 PSSA-000318 PSSA-000317 PSSA-000316 PSSA-000314 PSSA-000313 PSSA-000312 PSSA-000311 PSSA-000310 PSSA-000309 PSSA-000308 PSSA-000299 PSSA-000298 PSSA-000297 PSSA-000294 PSSA-000291 PSSA-000289 PSSA-000280 PSBO-002421 PSBO-002425 PSBO-002430 PSBO-002432 PSF35-000005 PSF22-000361 PSF22-000256 PSF22-000120 PSBO-002449 PSBO-002447 PSBO-002446 PSBO-002445 PSBO-002442 PSBO-002441 PSBO-002440 PSBO-002439 PSBO-002438 PSBO-002433 PSBO-002431 PSBO-002427 PSBO-002424 PSBO-002422 PSBO-002395 PSBO-002399 PSBO-002401 PSBO-002403 PSSA-000274 PSSA-000273 PSSA-000272 PSSA-000271 PSSA-000270 PSBO-002410 PSBO-002409 PSBO-002402 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A C B C E A A A A A A A A A A A A A A A A A A A A A A A A A A Title SS9170/479 REV 01, EMM, PROTECTIVE HAND CREAM CLASS SS9170/505 REV 03, EMM PEEL PLY RELEASE FABRICS CLASS SS9622 REV 03, ORGANIC FIBER CLOTH EPOXY RESIN PREIMPREGNATE SS9588 REV 05, FIBERGLASS EPOXY LAMINATES AND HONEYCOMB SAND SS9223 REV 04 AMD 02, POLYAMIDE HONEYCOMB CORE SS9223 REV 04 AMD 01, POLYAMIDE HONEYCOMB CORE SS9223 REV 04, POLYAMIDE HONEYCOMB CORE SS9171 REV 01, STANDARD DRAWING CALL-OUTS FOR TRADE NAME MAT SS9170/681 REV 04 DEV 01, EMM, SOLVENT DAMPENED WIPER CLOTHS SS9170/681 REV 04 AMD 01, EMM SOLVENT DAMPENED WIPER CLOTHS SS9170/681 REV 04, EMM, SOLVENT DAMPENED WIPER CLOTHS CLASS SS9170/660 REV 02 AMD 03, EMM VACUUM BAG SEALANT SS9170/660 REV 02 AMD 02, EMM, VACUUM BAG SEALANT SS9170/660 REV 02 AMD 01, EMM, VACUUM BAG SEALANT SS9170/542 REV 00 AMD 01, EMM PRESSURE STRIP INTENSIFIER SS9170/540 REV 01, EMM TOOLING RUBBER, SS9170/522 REV 04, EMM DEBULKING FILM CLASS (2) SS9170/502 REV 02, EMM TEFLON COATED GLASS CLOTH, NON-POROUS SS9170/382, EMM MIXING PADDLES CLASS SS9170/380, EMM THROWAWAY MIXING CUPS CLASS SS8535, CORROSION PREVENTION DURING MFG, STORAGE AND SHIPMEN BMS5-141 REV A, ADHESIVE, ROOM TEMP CURE BDS-207 D-03, MESA, PRODUCT DEFINITION STANDARD DEPARTURE BAC5759 REV D, CHEMICAL MILLING OF STEEL, NICKEL AND COBALT BAC5625 PSD6-59, SURFACE TEMP FOR FERROUS ALLOYS LMA-MR003-E, WATERBORNE EPOXY PRIMER 5PTPCG05-B, REQS FOR RADIOGRAPHIC INSPECTION PROCEDUR LMA-MR003-E, WATERBORNE EPOXY PRIMER 5PTPLG06-N PRCESS SPEC FOR THE MANUFACTURE AND QA CONTRO BAC5001-10 PSD6-44, TUBE ASSEMBLIES, INSTALLATION AND CLAMPI BAC5001-10 PSD6-42, TUBE ASSEMBLIES, INSTALLATION AND CLAMPI BAC5001-10 PSD6-41, TUBE ASSEMBLIES, INSTALLATION AND CLAMPI BAC5001-10 PSD6-38, TUBE ASSEMBLIES, INSTALLATION AND CLAMPI BAC5001-7 PSD6-7, INSTALL OF HOSE ASSEMB BAC5001-7 PSD6-4, INSTALL OF HOSE ASSEMB BAC5001-7 PSD6-3, INSTALL OF HOSE ASSEMB BAC5001-7 PSD6-2, INSTALL OF HOSE ASSEMB BAC5001-7 REV D, INSTALL OF HOSE ASSEMB BAC5605 REV D, INSTALL OF TUBING INSULATION. BAC5662 REV A, FRICTION STIR WELDING OF MEATLS BACB30XM REV G, BOLT BDS-207 D-01, BCA, PRODUCT DEFINITION STANDARD DEPARTURE BMS5-141 REV A, QPL D D32061-30 REV V, SETUP TEMPLATE FOR HORIZONTAL STRIPPET D32061-40 REV V, HOLE CHECKING TEMPLATE D32061-46 REV V, CAM TEMPLATE- INACTIVE D32061-50 REV V, TAP DRILL SIZE FOR STEEL ASQR-01 REV F, SUPPORTING DOCUMENTATION MAIN TEXT ASQR-01, GENERAL SUPPLIER INFORMATION. ASQR-01 REV H, UNIQUE REQUIREMENTS, TABLE OF CONTENTS ASQR-01 REV D, APP C SUPPORTING DOCUMENTATION ASQR-01 REV D, APP A SUPPORTING DOCUMENTATION BMS5-168, QPL REV B BMS5-168, FAST CURE FUEL TANK SEALANT D32061-47 REV V, PIN ROUTING TEMPLATE- INACTIVE Issued Date 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/15/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/14/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 4/13/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002400 PSBO-002397 PSBO-002396 PSBO-001774 PSBO-002368 PSBO-002370 PSBO-002373 GPS-FABR-0014 GPS-FABR-0012 GPS-FABR-0011 PSF22-001223 PSBO-002394 PSBO-002393 PSBO-002392 PSBO-002391 PSBO-002390 PSBO-002389 PSBO-002388 PSBO-002387 PSBO-002386 PSBO-002385 PSBO-002384 PSBO-002382 PSBO-002381 PSBO-002380 PSBO-002379 PSBO-002375 PSBO-002371 PSBO-002369 PSBO-002367 PSBO-002365 PSBO-002366 PSBO-002310 PSBO-002317 PSBO-002319 PSSA-000269 PSSA-000268 PSF22-001221 PSF22-001220 PSF22-001219 PSF22-001218 PSF22-001217 PSF22-001216 PSF22-001215 PSF22-001214 PSF22-001213 PSF22-001222 PSF22-001212 PSF22-001211 PSF22-001210 PSF22-001209 PSF22-001208 PSF22-001207 PSF22-001206 PSBO-002328 Rev. A A A C A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title D32061-44 REV V, OPTICAL COMPARATOR TEMPLATE D32061-33 REV V, WIEDEMANN SETUP TEMPLATE D32061-32 REV V, SPRAY TYPE SETUP TEMPLATE ST9M504 REV E, LUG ASSEMBLY - BAND CLAMP, 10 - 32 7M1233 REV A, VALVE, CHECK-LINE MOUNTED, PAO FLUID 30M-NAS671, NAS671, BOEING-ST.LOUIS SUPP FOR D32061-12 REV V, PROFILE TEMPLATE COBONDING CARBON/EPOXY PREPREGS, ALUMINUM HONEYCOMB CORE, HEAT AND CORROSION RESISTANT ALUMINUM SANDWICH ASSEMBLIES SANDWICH MAT'L, HONEYCOMB CORE, CARBON SKINS, FABRICATION OF LMA-PR006C, IN PROCESS ELECTRICAL TESTING D32061-28 REV V, STUDWELD SETUP TEMPLATE D32061-27 REV V, SUT FOR PIERCING PILOT HOLES IN CURVED STRI D32061-25 REV V, TYPICAL COMBINATION SETUP TEMPLATE D32061-24 REV V, TYPICAL SETUP TEMPLATE APPLICATIONS D32061-23 REV V, WALES TYPE HOLDERS D32061-22 REV V, SETUP TEMPLATE D32061-21 REV V, DIE CONSTRUCTION TEMPLATE D32061-20 REV V, JIG DRILL TEMPLATE D32061-19 REV V, HOLE LOCATING TEMMPLATE D32061-18 REV V, BONDING APPLY TRIM TEMPLATE D32061-17 REV V, PLASTIC APPLY TRIM TEMPLATE D32061-15 REV V, ROUTER DRILL TEMPLATE D32061-14 REV V, ROUTER DRILL TEMPLATE D32061-13 REV V, DEVELOPED BLANK TEMPLATE D32061-09 REV V, DEVELOPED BLANK TEMPLATE BAC5001-5 PSD6-17, COUPLING FERRULE DUCT END FABRICATION 30M-NAS1261 THRU 1265 REV A, BOLT, HEX HEAD, CLOSE TOLERANCE 30M-NAS427, NAS427, BOEING-ST.LOUIS SUPP FOR ST7M464 REV F, COUPLING, CLAMP, GROOVED-V-BAND, SWIVEL JOINT ST3M433 REV E, NUT, SELF-LOCKING, PLATE-TWO LUG FLOATING, ST3M812 REV R, PIN-RIVET, THREADED, SHEAR, 100DEG XBMS7-395-01, NITINOL ALLOY BAR, PLATE, SHEET, TUBE AND WIRE D32061-26 REV V, SETUP TEMPLATE-STRIP TYPE D32061-31 REV V, SUT- MACHINE RIVETER MARKING TEMPLATE AMS2658, HARDNESS AND CONDUCTIVITY INSPECTION OF WROUG AMS4329, ALUMINUM ALLOY, PLATE 5PTC7016 REV A, SPACER, CLAMP, LAMINATED, POLYIMIDE 5PTC7015 REV H, LABEL, 1D BARCODE, 2D UID DATA MATRIX AND GE 5PTC7014, CLAMP, SPACER, LAMINATED 5PTC7013 REV H, BOLT, SELF-RETAINING, IMPEDANCE TYPE, HEX HE 5PTC7012, CLAMP, SPACER 5PTC7011, SHIM, SOLID, POLYIMIDE 5PTC7010 SHIM, LAMINATED, COPPER 5PTC7009 REV A, SHIM, SOLID, CORROSION RESISTANT STEEL 5PTC7008 REV B, SHIM, SOLID, TITANIUM. 5PTC7018 REV B, FILLER, TAPERED, FIBERGLASS 5PTC7007 REV A, SHIM, SOLID, COPPER 5PTC7006 REV F, SHIM, SOLID, STOCK 5PTC7005 REV B, CONDUIT GROMMET-ENGINE BAY 5PTC7004 REV B, SHIM, LAMINATED, BERYLLIUM COPPER 5PTC7003 REV C, SHIM, SOLID, BERYLLIUM COPPER 5PTC7002 REV B, SUPPORT, LOOP CLAMP 5PTC7001 REV D, BOLT, SELF-RETAINING, IMPEDANCE TYPE D32061-45 REV V, PART NUMBERING TEMPLATE- INACTIVE - IDS-WIC Issued Date 4/13/2010 4/13/2010 4/13/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/12/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002327 PSBO-002326 PSBO-002325 PSBO-002324 PSBO-002323 PSBO-002322 PSBO-002321 PSBO-002320 PSF22-001205 PSF22-001204 PSF22-001203 PSF22-001202 PSF22-001201 PSF22-001200 PSF22-001199 PSF22-001198 PSBO-002354 PSBO-002353 PSBO-002352 PSBO-002351 PSBO-002350 PSBO-002343 PSBO-002331 PSBO-002330 PSBO-002329 PSBO-002361 PSBO-002359 PSBO-002358 PSBO-002357 PSBO-002318 PSBO-002316 PSBO-002313 PSBO-002314 PSBO-002315 PSBO-002281 PSBO-002286 PSBO-002292 PSF22-001197 PSF22-001196 PSF22-001195 PSF22-001194 PSF22-001193 PSF22-001192 PSF22-001191 PSF22-001190 PSF22-001189 PSF22-001188 PSF22-001187 PSF22-001186 PSF22-001185 PSF22-001184 PSF22-001183 PSF22-001182 PSF22-001181 PSF22-001180 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title D32061-43 REV V, CORE LOCATING TEMPLATE AND PLY LOCATING TEM D32061-42 REV V, CORE TRIM TEMPLATE D32061-41 REV V, CLOTH KIT TEMPLATE D32061-38 REV V, MASTER HOLE LOCATION TEMPLATE-INACTIVE D32061-37 REV V, MASTER TOOLING TEMPLATE D32061-36 REV V, EXTERIOR MARKING TEMPLATE D32061-35 REV V, COUNTERSINKING SHEET METAL PARTS D32061-34 REV V, SUT FOR MASS JOGGLED STRINGERS 5PTC7000, BOLT, TENSION, PLATED SHANK, NICKEL ALLOY 718 5PTC6001 REV B, NAMEPLATE - SUPPORT EQUIPMENT 5PTC5507 REV A, SHIM ASSY, LAMINATED-TUBE BLOCK CLAMPS 5PTC5506 REV A, WASHER, TEFLON 5PTC5505 REV C, SHIM ASSY, LAMINATED- TUBE BLOCK CLAMPS 5PTC5504 REV P, CLAMP, TUBE- ELASTOMERIC BLOCK, METALLIC CHA 5PTC5502 REV A, WASHER, RETAINING NUT MULTI-LOBED 4000 PSI B 5PTC5201, TOOL, COAX MULTIPORT- INSERTION AND REMOVAL BMS8-18 REV F, QPL BMS8-18 REV F, FLAME RETARDANT TREATED COTTON FABRIC BMS8-336 REV G, QPL BMS8-336 REV G, EXPANDED METAL FOIL FOR LIGHTNING STRIKE PRO BSS7063 SSD6-27, GENERAL REQUIREMENTS FOR CERT FOR ELECTICAL BSS7065 REV B, CERTIFICATION OF ELECTRICAL CRIMP TOOLS D32061-52 REV V, BACD2010 AND BACD2012 CUTOUTS D32061-51 REV V, LAYOUT FOR ROUND FLANGED HOLES D32061-49 REV V, SAMPLE PART TEMPLATE BACH30AP REV K, HOSE ASSEMBLY, NON-METALLIC-TEFLON, FLARED BAC5335 REV A, APP OF EXPANDED METAL FOIL LIGHTNING STRIKE P BDS-200 D-02, PRODUCT DEFINITION STANDARD DEPARTURE BDS-200 REV B, PRODUCT DEFINITION AUTHORITY AND PREPARATION D32061-29 REV V, MASKING SETUP TEMPLATE D31102-4 REV H, REFERENCE PUBLICATIONS ON RUBBER MOLDING PRO D31102-1 REV H, PLANNING CONSIDERATIONS FOR MOLDING RUBBER P D31102-2 REV H, MOLD DESIGN CONSIDERATIONS FOR MOLDING RUBBE D31102-3 REV H, STANDARD LOW PRESSURE INJECTION MOLDS D32061-04 REV V, TOOLING FABRICATION D32061-10 REV V, TOOLING FABRICATION BMS4-6 REV L, FLEXIBLE 5052 ALUMINUM ALLOY CORE 5PTC5001, BOSS, THERMAL WELL 5PTC4802 REV B, STRIP, GROUNDING- ELECTRONIC, CASE MOUNT 5PTC4801 REV J, JUMPER, GROUNDING 5PTC4602 REV E, FITTING, BULKHEAD- CONDUIT TERMINATION LIGHT 5PTC4601 REV D, FITTING, BULKHEAD- CONDUIT TERMINATION, LIGH 5PTC4402, SHIM, LAMINATED 5PTC4401, SAFETY PIN. 5PTC4260, SHIM, SOLID 5PTC4253, ALUMINUM SINGLE LAP SHEAR TEST PANEL 5PTC4252 REV A, TEST TAB PANEL 5PTC4251 REV A, HONEYCOMB CORE TEST TAB 5PTC4246, RADIUS BLOCK, EA3063 5PTC4245, SHIM, SOLID 5PTC4244, ADAPTER, BULKHEAD - FLEXIBLE COUPLING, MALE TO FEM 5PTC4240, FITTING, LUBRICATION, DRIVE TYPE 5PTC4238, FITTING, DRAIN, BULKHEAD, FLEXIBLE COUPLING CONNEC 5PTC4237 REV A, FITTING, DRAIN- BULKHEAD, FLEXIBLE COUPLING 5PTC4235 REV C, SHIM, COMPOSITE, MISC Issued Date 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/7/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001179 PSF22-001178 PSF22-001177 PSF22-001176 PSF22-001175 PSF22-001174 PSF22-001173 PSF22-001172 PSF22-001171 PSF22-001170 PSF22-001169 PSF22-001168 PSF22-001167 PSF22-001166 PSF22-001165 PSF22-001164 PSF22-001163 PSF22-001162 PSF22-001161 PSF22-001160 PSF22-001159 PSF22-001158 PSF22-001157 PSF22-001156 PSF22-001155 PSF22-001154 PSF22-001153 PSF22-001152 PSF22-001151 PSF22-001150 PSF22-001149 PSBO-002303 PSBO-002302 PSBO-002301 PSBO-002300 PSBO-002299 PSBO-002297 PSBO-002296 PSBO-002295 PSBO-002294 PSBO-002309 PSBO-002308 PSBO-002306 PSBO-002305 PSBO-002304 PSBO-002287 PSBO-002285 PSBO-002282 PSBO-002283 PSBO-002284 PSBO-002246 PSBO-002255 PSBO-002265 PSF22-001038 PSBO-002275 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A Title 5PTC4234, PLATE, TITANIUM STANDARD REPAIR 5PTC4233, FITTING, BULKHEAD- REDUCER, FLARELESS, O-RING, WIT 5PTC4232 REV A, ADAPTER, FLARELESS TO BOSS WITH FLANGE 5PTC4231, FITTING, BULKHEAD 45 DEG 0-RING SEAL TORQUE REDUCE 5PTC4230 REV C, UNION, FLARELESS TO FLEXIBLE COUPLING 5PTC4229, DOUBLER, TITANIUM, STANDARD REPAIR 5PTC4228, FITTING, BULKHEAD- FLARELESS TO BOSS, SPECIAL 5PTC4227 REV C, FITTING - BULKHEAD, DRAIN 5PTC4226 REV A, SHIM, LAMINATED 5PTC4225, RADIUS BLOCK, PHENOLIC RESIN 5PTC4224 REV A, INSERT, HOIST 5PTC4223 REV B, RADIUS BLOCK, ALUMINUM 5PTC4222 REV F, SHIM, SOLID, TAPERED 5PTC4221, WASHER, GROMMET- COUNTERBORED 5PTC4220 REV A, WASHER, SPECIAL 5PTC4219, FITTING, DRAIN 5PTC4218, FITTING, DRAIN - PENETRATION 5PTC4217, FITTING, DRAIN - BULKHEAD, FLARELESS TO TUBE, O-RI 5PTC4215 REV A, FITTING, BULKHEAD - DRAIN, FLARELESS, 90 DEG 5PTC4214 REV A, FITTING, BULKHEAD - DRAIN, FLARELESS, 45 DEG 5PTC4213 REV C, SPACER, NUTPLATE- DOMED 5PTC4212 REV A, SHIM, SOLID 5PTC4211 REV A, SHIM, LAMINATED 5PTC4210, SPACER, SOLID- ROUND 5PTC4209, BUSHING, NONREAM- PRESS FIT 5PTC4205 REV A, FITTING, DRAIN- BULKHEAD, FLARELESS 5PTC4204, NUT, FITTING- DRAIN, BULKHEAD 5PTC4203 REV A, FITTING, DRAIN- BULKHEAD, FLARELESS, O-RING 5PTC4017 REV A, FITTING, BULKHEAD- FLARELESS TO PENETRATION 5PTC4016 REV A, FITTING, BULKHEAD- FLARELESS TO PENETRATION, 5PTC4015, FITTING, BULKHEAD-FLEX COUPLING TO BOSS, O RING FA BAC5001-4 PSD6-48, FLARELESS TUBE END FABRICATION BAC5001-4 REV J, FLARELESS TUBE END FABRICATION BAC5219 PSD6-1, APP OF SILICONE CONFORMAL COATING BAC5219 REV J, APP OF SILICONE CONFORMAL COATING BAC5506 PSD6-17, INSTALL OF ELASTOMERIC SEALS BAC5755 PSD6-86, APP OF INTERIOR DECORATIVE FINISHES BAC5755 REV W, APP OF INTERIOR DECORATIVE FINISHES BAC5868 PSD6-24, APP OF REFER INFOR, PART NUMBERS BAC5868 REV N, APP OF REFERENCE INFO, PART NUMBERS, AND SERI 5PTC4018, FITTING, BULKHEAD- TERMINATION DMS2433 REV B, COATING, EPOXY TOPCOAT, FLUID RESISTANT DPS1.99-31.17 REV D, FABRICATION OF 350 DEG F SERVICE SANDWI DPS3.58-3912757 REV A, WING ACCESS DOOR ASSEMBLY BAC5000 PSD6-228, SEALING, GENERAL D32061-11 REV V, TOOLING FABRICATION D32061-08 REV V, TOOLING FABRICATION D32061-05 REV V, TOOLING FABRICATION D32061-06 REV V, TOOLING FABRICATION D32061-07 REV V, TOOLING FABRICATION D32061-01 REV V, TOOLING FABRICATION BAC5001-3 PSD6-30, TUBE BENDING BAC5307 PSD6-273, PART MARKING 5PTC1019 REV J, SHIM, SOLID, ALUMINUM BACS14R, SHOCK MOUNT, ISOLATOR, FLOATING, POLYETHERIMIDE Issued Date 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/6/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002274 PSBO-002270 PSBO-002256 PSBO-002254 PSBO-002247 PSBO-002248 PSF22-001128 PSF22-001127 PSF22-001126 PSF22-001125 PSF22-001124 PSF22-001123 PSF22-001122 PSF22-001121 PSF22-001111 PSF22-001148 PSF22-001147 PSF22-001146 PSF22-001145 PSF22-001144 PSF22-001143 PSF22-001142 PSF22-001141 PSF22-001140 PSF22-001139 PSF22-001138 PSF22-001137 PSF22-001136 PSF22-001135 PSF22-001134 PSF22-001133 PSF22-001132 PSF22-001131 PSF22-001130 PSF22-001129 PSBO-002253 PSF22-001025 PSF22-001053 PSF22-001055 PSF22-001057 PSF22-001059 PSF22-001061 PSF22-001063 PSF22-001088 PSF22-001087 PSF22-001086 PSF22-001085 PSF22-001084 PSF22-001083 PSF22-001082 PSF22-001081 PSF22-001080 PSF22-001106 PSF22-001104 PSF22-001103 Rev. A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title BACH5MTHRUH5X REV AL, HOSE ASSEMBLY BAC5436 PSD6-61, ETCH INSPECTION OF GROUND OR MACHINED STEEL BAC5001-3 PSD6-34, TUBE BENDING BAC5001-3 PSD6-26, TUBE BENDING D32061-02 REV V, TOOLING FABRICATION D32061-03 REV V, TOOLING FABRICATION 5PTC1519 REV A, SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION. 5PTC1518 REV C, O-RING, SPECIAL, NON-STANDARD SIZES 5PTC1517 REV B, RESTRICTOR ASSY, RETAINED NUT TO FLARELESS, 5PTC1516 REV E, HOSE, TRANSITION, SOFT CUFF, AIR DUCT, PREFO 5PTC1514 REV E, TEE, WELD ON RUN, INTERNAL PORT INSIDE BOSS 5PTC1513 REV A, ELBOW, 45 DEG, BULKHEAD, FLARED, OXYGEN 5PTC1512 REV E, HOSE, BENT, SOFT CUFF, AIR DUCT, PREFORMED, 5PTC1511 REV D, HOSE, STRAIGHT, SOFT CUFF, AIR DUCT, PREFORM 5PTC1218 REV A, LABEL, WARNING 5PTC4013, FITTING, BULKHEAD - O-RING FACE SEAL, SENSOR ADAPT 5PTC4012 REV A, FITTING, BULKHEAD- REDUCER, FLARELESS, O-RIN 5PTC4011 REV B, FITTING, BULKHEAD- FLARELESS, O-RING SEAL, 4 5PTC4010 REV A, FITTING, BULKHEAD- DRAIN 5PTC4009 REV E, FITTING, BULKHEAD- FLARELESS, O-RING FACE SE 5PTC4008 REV F, FITTING, BULKHEAD- FLARELESS, O-RING FACE SE 5PTC4007 REV E, FITTING, BULKHEAD- FLARELESS, O-RING FACE SE 5PTC4006 REV A, STRIP, TEFLON - FLANGED TEE, 500 DEG F 5PTC4004 REV H, COLLAR, FITTING 5PTC4003 REV C, WASHER, FITTING - BULKHEAD, LIGHTWEIGHT 5PTC4002 REV K, FITTING, BULKHEAD- LIGHTWEIGHT, WELDED 5PTC4001 REV F, FITTING, BULKHEAD- LIGHTWEIGHT 5PTC1528, LABEL, CANOPY 5PTC1527 REV B, RESTRICTOR, REDUCER, FLARELESS, 2 WAY 5PTC1525 REV A, SPACER, CLAMP SUPPORT, ALUMINUM, CONDUCTIVE 5PTC1524 REV A, TEE, WELD TO BEAM SEAL ON SIDE, .028 TUBE WA 5PTC1523 REV C, SPACER, CLAMP SUPPORT, ALUMINUM 5PTC1522 REV B, HOSE, BENT, SOFT CUFF, AIR DUCT, PREFORMED 5PTC1521, FITTING, DRAIN, TAPERED FLANGE, FLARELESS 5PTC1520 REV A, ORIFICE, ROUND PLUG BAC5001-3 REV F, TUBE BENDING 5PTC1505 REV E, CLAMP, BLOCK-ALUMINUM, RUDDER MOTION TUBING 5PTC1034 REV B, BOLT, SHOULDER, HEX, INCONEL, SPECIAL 5PTC1037 REV C, WASHER, CLOSE TOLERANCE I.D 5PTC1039 REV B, BOLT, SHOULDER, HEX, KEYWAYS, INCONEL, 108 K 5PTC1047 REV A, BUSHING, PRESS FIT, PLAIN, NON-REAM, SPECIAL 5PTC1049 REV F, SPECIAL BOLT 5PTC1051 REV F, BOLT, SPECIAL 5PTC1078, SCREW, CAP, SOCKET HEAD, CONTROLLED LENGTH. 5PTC1076 REV B, WASHER, TRIMMED 5PTC1075 REV B, EDDIE BOLT, SPECIAL 5PTC1074 REV E, EDDIE BOLT CAP 5PTC1073 REV B, ALIGNMENT PIN 5PTC1072 REV A, SHIM, SOLIC FIBERGLASS 5PTC1071 REV A, BOLT, SPECIAL 5PTC1070 REV E, BOLT, SPECIAL 5PTC1069 REV E, BOLT, SPECIAL 5PTC1206 REV A, LABEL, BRAKE SWITCH- MANUAL AND ANTI -SKID 5PTC1204, LABEL, DIVERTER VALVE 5PTC1203, LABEL, JACKSCREW Issued Date 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/5/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-001102 PSF22-001101 PSF22-001100 PSF22-001099 PSF22-001098 PSF22-001097 PSF22-001120 PSF22-001119 PSF22-001118 PSF22-001117 PSF22-001115 PSF22-001114 PSF22-001110 PSF22-001109 PSF22-001108 PSF22-001107 PSF22-001096 PSF22-001095 PSF22-001094 PSF22-001093 PSF22-001092 PSF22-001091 PSF22-001090 PSF22-001089 PSF22-001079 PSF22-001078 PSF22-001077 PSF22-001076 PSF22-001075 PSF22-001074 PSF22-001073 PSF22-001072 PSF22-001071 PSF22-001070 PSF22-001069 PSF22-001068 PSF22-001067 PSF22-001066 PSF22-001065 PSF22-001064 PSF22-001062 PSF22-001060 PSF22-001058 PSF22-001056 PSF22-001054 PSBO-002225 PSBO-002236 PSBO-002239 PSF22-000991 PSF22-000990 PSF22-000989 PSF22-000988 PSF22-000986 PSF22-000985 PSBO-002245 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTC1202, LABEL, CANOPY LOCK, ACTUATOR, SECONDARY 5PTC1201, LABEL, CANOPY MANUAL DRIVE UNIT 5PTC1200, DECAL, SWITCH GUARD 5PTC1092, SHIM, WEDGE BLOCK 5PTC1091 REV A, RADIUS BLOCK, SLOTTED 5PTC1089, EDDIE BOLT-REDUCED HEAD SPECIAL 5PTC1510 REV A, ELBOW, 90 DEG, BULKHEAD, FLARED, OXYGEN 5PTC1509 REV B, UNION, BULKHEAD, FLARED OXYGEN 5PTC1508 REV A, FITTING, FLARELESS, ALUMINUM, MODIFIED 5PTC1507 REV C, RESTRICTOR, FLARELESS, 2 WAY 5PTC1504 REV B, CLAMP, BLOCK-PHENOLIC, MOTION TUBING 5PTC1503 REV A, ADAPTER, FLARELESS BULKHEAD TO HOSE CONNECTI 5PTC1212, LABEL, LRM 5PTC1211 REV B, PLACARD, ID F22 AIR VEHICLE 5PTC1209, LABEL, APU BRACKET 5PTC1207 REV C, LABEL, AVIONICS MODULE 5PTC1087, SPECIAL BOLT 5PTC1085 REV A, SHIM, SPECIAL 5PTC1084, SHIM, SOLID, ALUMINUM, CONDUCTIVE 5PTC1083 REV A, SHIM, SOLID, TAPERED, TITANIUM, SPECIAL 5PTC1082 REV A, WASHER, DIMPLED 100 DEG 5PTC1081, BUSHING, FLANGED 5PTC1080 REV B, INDEX PIN 5PTC1079, BUSHING, PRESS FIT 5PTC1068 REV A, JACKSCREW ASSY, SPECIAL 5PTC1067 REV A, BLOCK, RADIUS- TITANIUM AND ALUMINUM, LONG L 5PTC1066 REV D, SHIM, SOLID FIBERGLASS, 5PTMBT07 5PTC1065 REV C, INDEX PIN-SPECIAL 5PTC1064 REV B, INDEX PIN-SPECIAL 5PTC1063 REV E, BOLT, SPECIAL 5PTC1062 REV A, BUSHING-SPECIAL, SLEEVE, FLANGED, PRESS FIT, 5PTC1061 REV F, BOLT, SPECIAL 5PTC1060 REV F, BOLT, SPECIAL 5PTC1059, BUSHING, FLANGED, SLOTTED 5PTC1058 REV A, BOLT, SPECIAL 5PTC1057 REV A, BOLT, TENSION, SPLINE, KEYWAYS, MP159, 260 K 5PTC1055 REV B, BOLT, SHOULDER, HEX, KEYWAYS, INCONEL, 132 K 5PTC1054 REV A, BOLT, TENSION, SPLINE, KEYWAYS, INCONEL 718 5PTC1053 REV A, WASHER, FLAT, OVERSIZED I.D.. 5PTC1052 REV H, BOLT, SPECIAL 5PTC1050 REV J, BOLT, SPECIAL 5PTC1048 REV F, BOLT, SPECIAL 5PTC1046 REV B, SPECIAL BOLT 5PTC1038 REV A, BUSHING, SPECIAL, FLANGED, PRESS FIT, NON-RE 5PTC1036 REV K, LABEL, CLASSIFICATION MMS2404 REV J, POWDER, IRON-SILICON ALLOY BMS7-247 REV H, TITANIUM 6AI-4V FORGINGS PREMIUM QUALITY BMS7-249 REV C QPL REV E 5PTA0004B, ELECTRICAL CONNECTOR SELECTION AND REQUIREMENTS F 5PD41946B, PARTS-CONTROL NUMBERS AND ID OF ALTERNATE SOURCES 5PD40745, SUMMARY LISTING OF FA22 APPROVED SUBSTITUTIONS FQPL-5PTPLG26-4 FQPL-5PTPLG06-7 FQPL-5PTPLG05 PS14213 REV L DEV 1 GKN, VACUUM FORMING OF F15 TITANIUM WING Issued Date 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/2/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002244 PSBO-002242 PSF22-001016 PSF22-001015 PSF22-001014 PSF22-001013 PSF22-001012 PSF22-001011 PSF22-001010 PSF22-001009 PSF22-001008 PSF22-001034 PSF22-001033 PSF22-001032 PSF22-001031 PSF22-001030 PSF22-001029 PSF22-001028 PSF22-001027 PSF22-001026 PSF22-001052 PSF22-001051 PSF22-001050 PSF22-001049 PSF22-001048 PSF22-001047 PSF22-001046 PSF22-001045 PSF22-001043 PSF22-001042 PSF22-001041 PSF22-001040 PSF22-001039 PSF22-001037 PSF22-001036 PSF22-001035 PSF22-001024 PSF22-001023 PSF22-001022 PSF22-001021 PSF22-001020 PSF22-001019 PSF22-001018 PSF22-001017 PSF22-001007 PSF22-001006 PSF22-001005 PSF22-001004 PSF22-001003 PSF22-001002 PSF22-001001 PSF22-001000 PSF22-000999 PSF22-000998 PSF22-000997 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title XBPS-C-247, CONNECTOR, ELECTRICAL, CIRCULAR, EMI, PUSH-PULL BPS-D-213 SUP REV A, DUCTS, AIR, FLEXIBLE AND SEMI RIGID NON 5PTC0024-QPL REV A, TUBING, JUNCTIONS AND ADAPTERS 5PTC0024 REV D, CONVOLUTED, TUBING, JUNCTIONS AND ADAPTERS 5PTC0023 REV K, BACKSHELLS, 45 DEGREE, SADDLE BAR, FOR MIL-C 5PTC0022 REV F, BACKSHELLS, 45 DEGREE, SADDLE BAR, FOR MIL-C 5PTC0021 REV G, COUNVOLUTED, TUBING, ASSEMBLY AND ADAPTERS 5PTC0020 REV A, STRIP-SUPPORT BRACKET 5PTC0019 REV A, SUPPORT, STRIP- WIRE 5PTC0018, JUMPER ASSY, ELECTICAL BONDING AND CURRENT RETURN 5PTC0017 REV C, SPACER-THREADED 5PTC1014 REV C, STRIP-PANEL FASTENER RECEPTACLE 5PTC1013 REV F, SHIM, WASHER, LAMINATED 5PTC1012 REV A, STRIP-PANEL FASTENER RECEPTACLE 5PTC1011 REV D, BOLT, SHOULDER, HEX INCONEL, 132 KSI SHEAR 5PTC1010 REV B, SPACER, ALUMINUM 5PTC1009 REV B, FLANGE, HOSE CONNECTION 5PTC1008 REV B, PIN, STRAIGHT, HEADED, GROOVED 5PTC1006 REV D, BUSHING SLEEVE, PRESS FIT 5PTC1005 REV B, SPACER, SPECIAL 5PTC1033 REV A, BUSHING, SPECIAL, PUSH FIT 5PTC1032 REV A, BUSHING, SPECIAL, PRESS FIT, REAM TYPE 5PTC1031 REV B, LABEL, CAUTION 5PTC1030 REV A, BUSHING, PUSH FIT, PLAIN, CLAMPED, NON-REAM, 5PTC1029 REV A, BOLT, SHOULDER, HEX INCONEL, 108 SKI SHEAR 5PTC1028 REV A, LABEL, SEAT SWITCH 5PTC1027 REV A, SHIM, TAPERED, 5052-H32 5PTC1026 REV A, LABEL, CANOPY SWITCH 5PTC1024 JACKSCREW ASSY, SPECIAL 5PTC1023 REV B, BOLT, HEX, 100 DEG. HEAD, INCONEL, 2 LEAD TH 5PTC1022 REV C, STAP ASSY 5PTC1021 REV J, SPECIAL BOLT 5PTC1020 REV M, WASHER, SPECIAL 5PTC1018 REV C, WASHER, COUNTERSUNK 5PTC1017 REV B, BUSHING, FLANGED, INTERFERENCE FIT 5PTC1015 REV D, SHIM, SOLID, ALUMINUM, 5052-0. 5PTC1003 REV A, BUSHING, SLUG, INTERFERENCE FIT, PLAIN, REPA 5PTC1002 REV A, BUSHING, SLUG, CLEARANCE FIT, PLAIN, REPAIR 5PTC1000 REV B, MARKER, CAUTION, 270VDC 5PTC0141 REV A, SWITCH ASSEMBLY, HOTAS 5PTC0029 REV A, GUARD, TOGGLE SWITCH 5PTC0028 REV C, CONVOLUTED TUBING, COILED 5PTC0027 REV A, FIBER OPTIC TERMINI REPLACEMENT 5PTC0025 REV J, FLIGHT CAP, IAR CONNECTOR 5PTC0016 REV N, BRACKET, SUPPORT, GENERAL 5PTC0015 REV A, WASHER, COUNTERSUNK 5PTC0014 REV C, GROUND STUD ASSEMBLY- PERMANENT, COUNTERSUNK 5PTC0013 REV C, GROUND STUD ASSEMBLY PERMANENT DIMPLED MOUNT 5PTC0012 REV D, GROUND STUD ASSEMBLY- PERMANENT, PAN HEAD SC 5PTC0011 REV B, GROUND STUD ASSEMBLY-NUT PLATE MOUNTED, PAN 5PTC0010 REV A, GROUND STUD ASSEMBLY PERMANENT, PRIMARY STRU 5PTC0008, PLATE, COVER, ELECTRICAL CONNECTOR HOLES 5PTC0007 REV C, BACKSHELL, 90 DEGREE, OVERALL SHIELD TERMINA 5PTC0006 REV C, BACKSHELL, 45 DEGREE, OVERALL SHIELD TERMINA 5PTC0005 REV C, BACKSHELL, STRAIGHT, OVERALL SHIELD TERMINAT Issued Date 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000996 PSF22-000995 PSF22-000994 PSF22-000993 PSF22-000992 PSBO-002238 PSBO-002232 PSBO-002227 PSBO-002230 PSBO-002231 PSBO-001000 PSBO-002197 PSBO-002204 PSBO-002217 PSBO-002216 PSBO-002215 PSBO-002214 PSBO-002213 PSBO-002208 PSBO-002207 PSBO-002206 PSBO-002205 PSBO-002224 PSBO-002223 PSBO-002222 PSBO-002198 PSBO-002194 PSBO-001154 PSBO-002191 PSBO-002193 PSBO-002192 PSF22-000959 PSF22-000962 PSF22-000963 PSF22-000961 PSF22-000960 PSF22-000964 PSF22-000966 PSF22-000984 PSF22-000980 PSF22-000979 PSF22-000978 PSF22-000977 PSF22-000976 PSF22-000975 PSF22-000974 PSF22-000973 PSF22-000972 PSF22-000971 PSF22-000970 PSF22-000969 PSF22-000968 PSF22-000967 PSF22-000965 PSBO-002189 Rev. A A A A A A A A A A B A A A A A A A A A A A A A A A A C A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTC0004 REV H, BACKSHELL, 90 DEGREE, SADDLE BAR, FOR MIL-C5PTC0003 REV G, BACKSHELL, STRAIGHT, SADDLE BAR FOR MIL-C-50 5PTC0002 REV H, BACKSHELL, 90 DEGREE, SADDLE BAR, FOR MIL-C5PTC0001 REV G, BACKSHELLS, STRAIGHT, SADDLE BAR FOR MIL-C-3 5PTC0000 REV D, PROCUREMENT SPEC FOR F22 BACKSHELLS BMS7-249 REV C, VACCUM ARC REMELTED SAE 9310 STEEL BARS, FOR BDS-602, D03 BCA BACC63BV REV AM, CONNECTOR, ELECTRICAL, RECEPTACLE, FLANGE M BDS-602, D01 BDS-602, D02 MESA 7M1256 REV B PLUG, QUICK DISCONNECT-PROTECTIVE PRESSURE SEAL BACT12AV REV A, TERMINAL, RING TONGUE, NICKEL BODY BAC5001-6 PSD6-44, INSTALL OF TUBE FITTINGS; LUBRICATION AN BAC5321 REV B, INJECTION MOLDING OF THERMOPLASTIC PARTS BAC5064 PSD6-33, INSTALLATION OF INSERTS, PANEL FASTENERS BAC5064 REV D, INSTALLATION OF INSERTS, PANEL FASTENERS AND BAC5639 PSD6-14, APP OF ANTI-STATIC COATINGS BAC5639 REV A, APP OF ANTI-STATIC COATINGS BAC5010 REV W, APP OF ADHESIVES BAC5001-6 PSD6-47, INSTALLATION OF TUBE FITTINGS; LUBRICATI BAC5001-6 PSD6-46, INSTALLATION OF TUBE FITTINGS; LUBRICAT BAC5001-6 PSD6-45, INSTALLATION OF TUBE FITTINGS; LUBRICATI BACC63BN REV W, CONNECTOR, ELECTICAL, PLUG, STRAIGHT, BAYONE BAC5348 PSD6-5 PROCESSING OF REINFORCED THERMOPLASTIC LAMINA BAC5348 PSD6-4, PROCESSING OF REINFORCED THERMOPLASTIC LAMIN MS27751SUP REV A, RELAYS, ELECTROMAGNETIC BACH30BE REV N, HOSE ASSEMBLY PS15701 REV N DEV 1 GEN HEAT TREATING CRITERIA FOR ALUM ALL ST5M1582 REV F, FLOODLIGHT, ELECTRIC-BUSHING MOUNT BMS8-407A, QPL BMS8-407A, THERMALLY CONDUCTIVE GRAPHITE SHEETS 5PTPGL06-QPL 5PTPKL04-QPL-4 5PTPKL17-QPL 5PTPKL02-QPL-1 5PTPHL21-QPL-1 5PTPKL19-QPL 5PTPLL19-QPL-8 FQPL-5PTPLG04-2 FQPL-5PTPKG17 FQPL-5PTPKG16 FQPL-5PTPKG10 FQPL-5PTPKG07-1 FQPL-5PTPKG06 FQPL-5PTPDT01 FQPL-5PTPDG02-1 FQPL-5PTPBT14 FQPL-5PTPAG90-5 FQPL-5PTPAG51-2 5PTPTL24-QPL-1 5PTPTL22-QPL-1 5PTPTL11-QPL-7 5PTPLL21-QPL-4 5PTPKL20-QPL PS20109 REV E, PRESERVATION, STORAGE, HANDLING AND INSTALL Issued Date 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 4/1/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/31/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/30/2010 3/29/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000812 PSF22-000676 PSF22-000677 PSF22-000813 PSF22-000815 PSF22-000817 PSF22-000826 PSF22-000825 PSF22-000824 PSF22-000823 PSF22-000822 PSF22-000821 PSF22-000820 PSF22-000819 PSF22-000818 PSF22-000835 PSF22-000834 PSF22-000833 PSF22-000832 PSF22-000831 PSF22-000830 PSF22-000829 PSF22-000828 PSF22-000827 PSF22-000844 PSF22-000843 PSF22-000842 PSF22-000841 PSF22-000840 PSF22-000838 PSF22-000837 PSF22-000836 PSF22-000816 PSF22-000814 PSF22-000811 PSF22-000808 PSF22-000739 PSF22-000743 PSF22-000745 PSF22-000747 PSF22-000761 PSF22-000760 PSF22-000759 PSF22-000758 PSF22-000757 PSF22-000751 PSF22-000750 PSF22-000749 PSF22-000748 PSF22-000807 PSF22-000806 PSF22-000805 PSF22-000804 PSF22-000803 PSF22-000802 Rev. A B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTPHL23-B, BORIC ACID-SULFURIC ACID ANODIZING OF ALUMINUM 5PTMFG92-A, PRESSURE SENSITIVE ADHESIVE POLYESTER FILM 5PTMFG93-C, PRESSURE SENSITIVE ADHESIVE OVERLAMINATE 5PTPKL21, STRUCTURAL REPAIR OF FA 22 COMPOSITE PARTS 5PTM1T01-QPL-2 5PTM1T03-QPL-3 5PTMBT02-QPL-3 5PTMAT12-QPL 5PTMAT11-QPL-1 5PTMAT09-QPL-2 5PTMAT04-QPL-2. 5PTMAT02-QPL-2 5PTM1T10-QPL 5PTM1T05-QPL 5PTM1T04-QPL-2 5PTMEL04-QPL 5PTMDT05-QPL-1 5PTMDT02-QPL-2 5PTMDT01-QPL-1 5PTMCT04-QPL 5PTMBT15-QPL 5PTMBT14-QPL 5PTMBT08-QPL-2 5PTMBT07-QPL 5PTMUT06-QPL 5PTMUT03-QPL-2 5PTMUT02-QPL 5PTMRT10-QPL 5PTMLT13-QPL-2 5PTMLG69-QPL 5PTMKT03-QPL-3 5PTMKT01-QPL 5PTM1T02-QPL-2. 5PTPRT15-A02, ASSEMBLY OF NON STANDARD ELECTRICAL CONNECTORS 5PTPDL11, HEAT TREATMENT AND PROCESSING OF COPPER AND COPPER 5PTPBL14-G, CANCELLED USE 5PTPBG04 5PTMLL27, EPOXY FILM ADHESIVE, LIGHT WEIGHT, 250 F CURE 5PTMMG01-B, THERMAL BARRIER COATING 5PTMNG89, ALKALINE DEGREASER 5PTMNL02, CLEANER, EMULSION 5PTMRG28, MOISTURE BARRIER COATING 5PTMRG27, TEFLON PIGMENTED COATINGS 5PTMRG01 A, THIN FILM CERAMIC EPOXY COATING 5PTMNL22, AQUEOUS ALKALINE DEGREASER 5PTMNL21, AQUEOUS CLEANER, FOR PRECISION CLEANING OF METAL P 5PTMNL06, DEOXIDIZER, ACID TYPE, FOR ALUMINUM ALLOYS 5PTMNL05, CLEANER, ETCH, ALKALINE, FOR ALUMINUM AND ALUMINUM 5PTMNL04, CLEANER, ALKALINE, NON-ELECTROLYTIC 5PTMNL03, ETCHANT, ALKALINE, FOR ALUMINUM ALLOYS 5PTMYL03, APPROVED LM AERO FW MATERIALS FOR SUBSTITUTION 5PTMYL01, HAZARDOUS MATERIALS CONTROL AND APPROVAL OF 5PTMWG08, ONE PART EPOXY ADHESIVE FOR GENERAL PURPOSE BONDIN 5PTMWG07, THERMALLY CONDUCTIVE PAD FOR F22 AIM 9 POWER SUPPL 5PTMWG06, POLYURETHANE VARNISH FOR COATING F22 AIM 9 POWER S 5PTMWG05, TWO PART EPOXY FOR USE AS A LAMINATING, POTTING OR Issued Date 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/29/2010 3/24/2010 3/23/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000801 PSF22-000800 PSF22-000799 PSF22-000798 PSF22-000797 PSF22-000795 PSF22-000794 PSF22-000793 PSF22-000792 PSF22-000791 PSF22-000790 PSF22-000789 PSF22-000787 PSF22-000786 PSF22-000785 PSF22-000784 PSF22-000783 PSF22-000781 PSF22-000780 PSF22-000779 PSF22-000778 PSF22-000777 PSF22-000776 PSF22-000774 PSF22-000773 PSF22-000772 PSF22-000771 PSF22-000770 PSF22-000767 PSF22-000765 PSF22-000763 PSF22-000762 PSF22-000746 PSF22-000744 PSF22-000741 PSF22-000740 PSF22-000016 PSF22-000470 PSF22-000722 PSF22-000724 PSF22-000737 PSF22-000736 PSF22-000735 PSF22-000734 PSF22-000733 PSF22-000732 PSF22-000731 PSF22-000730 PSF22-000727 PSF22-000726 PSF22-000725 PSF22-000723 PSF22-000583 PSF22-000715 PSF22-000720 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C B A A A A A A A A A A A A A A B A A Title 5PTMWG04, TWO PART EPOXY ADHESIVE FOR GENERAL PURPOSE BONDIN 5PTMWG03, THERMALLY CONDUCTIVE EPOXY ADHESIVE 5PTMWG02, ONE COMPONENT FREE FLOWING SYNTACTIC FOAM POWDER 5PTMWG01, THERMALLY CONDUCTIVE SILICONE RUBBER POTTING COMPO 5PTMUT06, SEALANT, POLYSULFIDE, CORROSION RESISTANT 5PTMUT03-D-A01, SEALING COMPOUND, FUEL RESISTANT, ELECTRICAL 5PTMUT02-A, METALLIC FILLER 5PTMUT01-A, POLYSULFIDE SEALING CAPS 5PTMUG64B, FAST, LOW TEMP CURING, POLYTHIOETHER INTEGRAL FUE 5PTMUG44 AMD 1, SEALANT, INTEGRAL FUEL TANK AND GENERAL USAG 5PTMUG31-A01-B, HIGH TEMP, GENERAL PURPOSE SEALING COMPOUND 5PTMUG04-B, FOAM, POLYURETHANE, FOAM IN PLACE, VOID FILLER 5PTMRT10-A-A01, NON CHROMATED SOLVENTBORNE EPOXY PRIMER. 5PTMRT06-A, COATING, MOISTURE BARRIER AND ABRASION RESISTANT 5PTMRT01-V01, ANTISTATIC COATING 5PTMRL42-B, NON-CHROMATED FLEXIBLE PRIMER 5PTMRL40-B, ABRASION RESISTANT POLYURETHANE COATINGS, TEFLON 5PTMRL35-D, SINGLE COMPONENT WATER BASED POLYURETHANE TOPCOA 5PTMRL34-D-A01, INTEGRATION MAT MATERIALS 5PTMRL30, TEMP SIGNALING PAINT 5PTMRL29-A03, STENCIL ENAMEL 5PTMRL28, COATING, POLYURETHANE POLYCARBONATE-COMPATIBLE 5PTMRL26-A, COATING, POLYIMIDE, HIGH DIELECTRIC STRENGTH 5PTMRL23-B, HIGH TEMP PRIMER FOR EXTERIOR TOPCOAT 5PTMRL21-F, EXTERIOR POLYURETHANE COATINGS 5PTMRL17-B-A02, ANTISTATIC RAIN EROSION COATING SYSTEM 5PTMRL16-C, COATINGS, METALLIC-CERAMIC 5PTMRL15, COATING, INTERNAL, CANOPY. 5PTMRL09-M-A01, INTEGRATION MATERIALS 5PTMRL02-E, COATING SYSTEM, RAIN EROSION AND FUNGUS RESISTAN 5PTMRG58, PRIMERS FOR SEALANTS 5PTMRG35, FLEXIBLE CORROSION INHIBITING PRIMER 5PTMNL01, CLEANER, ALKALINE, FOR ALUMINUM AND MAGNESIUM ALLO 5PTMMG40D, ADHESION PROMOTER SOLVENT COMPOUND 5PTMLT11, ADHESIVE, SOLVENT THINNED, NON-STRUCTURAL, GENERAL 5PTMLT10-A, GRAPHITE MAT IMPREGNATION RESIN 5PTMCT01-E, MATERIAL SPEC FIBERS AND FABRICS, CARBON, FOR 5PTPKL22-A, ADHESIVE APPLICATION OF LIGHT ABSORBING MATERIAL LMA-MC001A, FIBERS ADN FABRICS, CARBON, FOR STRUCTURAL COMP 5PTMLG68-B, HIGH PEEL, ROOM OR ELEVATED TEMP CURING EPOXY 5PTMLL25-A, ADHESIVE FILM, CYANATE ESTER, 250 F STAGING, 350 5PTMLL24, AQUEOUS ADHESIVE FOR METAL TO RUBBER 5PTMLL20-A, CYANATE ESTER EXPANDED FOAM, 350 F 5PTMLL19-A, ADHESIVE FILM, CYANATE ESTER, 300 F SERVICE 5PTMLL18-A, ADHESIVE FILM, EPOXY, 250 F OR 350 F CURE, 250 F 5PTMLL17-A, ADHESIVE-SEALING COMPOUND, ONE PART, ROOM TEMP 5PTMLL16-A, PRIMER FOR SILICONE RUBBER, ROOM TEMP VULCANIZIN 5PTMLG83, MODIFIED EPOXY PHENOLIC ADHESIVE FILM 5PTMLG75-A, FAST CURING ACRYLIC ADHESIVE 5PTMLG70, HIGH TEMP EPOXY PHENOLIC ADHESIVE 5PTMLG69B, TWO PART EPOXY ADHESIVE FOR USE IN INTEGRAL FUEL 5PTMLG53A, COMPOUND, COMPRESSION MOLDING, GLASS FILLED EPOXY 5PTPJG01 APP A REV 2, FINISH CODES 5PTMKT01-A, BISMALEIMIDE POTTING COMPOUND 5PTMLG25 AMD 1, EPOXY RESINS FOR HIGH TEMP APPS Issued Date 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/22/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/19/2010 3/18/2010 3/18/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000721 PSF22-000717 PSF22-000716 PSBO-000068 PSF22-000693 PSF22-000692 PSF22-000691 PSF22-000690 PSF22-000689 PSF22-000686 PSF22-000685 PSF22-000684 PSF22-000683 PSF22-000702 PSF22-000701 PSF22-000700 PSF22-000699 PSF22-000698 PSF22-000697 PSF22-000696 PSF22-000695 PSF22-000694 PSMR-000009 PSF22-000714 PSF22-000713 PSF22-000711 PSF22-000710 PSF22-000707 PSF22-000706 PSF22-000705 PSF22-000704 PSF22-000703 PSBO-002183 PSF22-000635 PSF22-000638 PSF22-000639 PSF22-000637 PSF22-000636 PSF22-000640 PSF22-000642 PSF22-000652 PSF22-000651 PSF22-000650 PSF22-000649 PSF22-000648 PSF22-000646 PSF22-000645 PSF22-000644 PSF22-000643 PSF22-000682 PSF22-000681 PSF22-000679 PSF22-000678 PSF22-000675 PSF22-000674 Rev. A A A C A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTMLG49 AMD 1, HIGH TEMP PHENOLIC RESIN 5PTMLG03B, RETAINING COMPOUNDS AND PRIMERS 5PTMLG02, INTERMEDIATE TEMP CURING TWO-PART EPOXY MATERIALS PS13633 REV M - APPLICATION OF ARC-SPRAYED TIN/ZINC COATINGS 5PTMJG19, CLOSED CELL VINYL FOAM 5PTMJG02, CERAMIC FIBER INSULATION 5PTMJG01 AMD 1, CLOSED CELL NEOPRENE FOAM 5PTMGG67, CACRON POLYESTER FABRIC 5PTMGG55A, TAPE AND CLOTH GLASS FABRIC 5PTMGG09, HIGH TEMP SILICONE COATED NYLON FABRIC 5PTMGG04, WOVEN TEXTILE NYLON WEBBING 5PTMGG00, NYLON CLOTH 5PTMFT03-A-V02, COLOR CODED PRESSURE SENSITIVE ADHESIVE TUBE 5PTMKG36, LAMINATED ABS SHEET 5PTMKG01, POLYETHERIMIDE MOLDING RESIN 5PTMKG00A, AMD 1, PTFE SHEET AND ROD 5PTMJT02, FOAM, POLYURETHANE, FLEXIBLE 5PTMJG81, HEAT SHRINKABLE TUBING WITH ADHESIVE 5PTMJG45, PREFORMED CERAMIC THERMAL INSULATION 5PTMJG31, HEAT SHRINKABLE ELECTRICAL ID TAPE 5PTMJG25-C, FLEXIBLE THERMAL BLANKET INSULATION 5PTMJG21-A, FLEXIBLE POLYURETHANE FOAM PROCESS SPECIFICATION FOR COMPOSITE CASCADE SPEC 5PTMKL15-A, FILM, FLUOROPOLYMER, BONDABLE, HIGH DIELECTRIC 5PTMKL13-B, FILM, PFA, SODIUM AMMONIA ETCHED 5PTMKL10-B, THERMOPLASTICE SHEET, POLYCARBONATE 5PTMKL09-B, POLYCARBONATE SHEET, TRANSPARENT, STRUCTURAL 5PTMKG85, NYLON SHEET AND ROD 5PTMKG64, POLYPHENYLENE SULFIDE SHEET ROD AND PELLET 5PTMKG58, LAMINATED PHENOLIC SHEET, COTTON FABRIC BASE 5PTMKG53-A, MOLYBDENUM DISULFIDE FILLED NYLON SHEET AND ROD 5PTMKG50-A, POLYAMIDE IMIDE SHEET, ROD, AND PELLET 5M1698 REV C, LAMP, INCANDESCENT, T-2 1/4 BULB, HALOGEN FILL LMA-MD028, STRUCTURAL ADHESIVE, 250 CURE TEMPERATURE, CONTRO 5PTMCG05, DRY CARBON UNI-TAPE FOR RTM APPS 5PTMCL01, CARBON Z-PIN PREFORMS FOR THROUGH THE THICKNESS 5PTMBT15-A, FABRIC, S-2 GLASS, WOVEN EPOXY RESIN IMPREGNATED 5PTMBT14-A, FABRIC, CARBON FIBER, WOVEN EPOXY RESIN IMPREGNA 5PTMCT04-A, RANDOM CARBON FIBER MAT-DRY 5PTMDG10A, ALUMINUM HONEYCOMB CORE MATERIAL-5052 ALLOY 5PTMDT01-C, CORE, HONEYCOMB, ALUMINUM ENHANCED CORROSION RES 5PTMDL15-A, CORE MATERIAL, SYNTACTIC, CYANATE ESTER, 250 5PTMDL13-A, CORE, SYNTACTIC, CYANATE ESTER, FOR 300 SERVICE 5PTMDL12-B, CORE, HONEYCOMB, ARAMID FIBER, PHENOLIC RESIN 5PTMDL10-H-A02, CORE MATERIALS 5PTMDG22A, GLASS REINFORCED PHENOLIC HONEYCOMB CORE 5PTMFG11, NYLON HOOK AND PILE FASTENER TAPE 5PTMDG19A, ADHESIVE FILM COMPOUND, PRIMARY SPLICE MATERIAL F 5PTMDG13, HONEYCOMB CORE, ARAMID FIBER REINFORCED PHENOLIC 5PTMFL04-A, FASTENER TAPE, HOOK AND PILE, FIRE RETARDANT 5PTMFL02, DECALCOMANIA, HIGH HEAT RESISTANCE, OPERATIONS UP 5PTMFG98, QUARTZ CLOTH TAPE 5PTMFG94B, COLOR CODED PRESSURE SENSITIVE ADHESIVE ID TAPE 5PTMFG89 A, ELECTRICAL LACING TAPE 5PTMFG84, UNSUPPORTED SELF ADHESIVE CILICONE TAPE Issued Date 3/18/2010 3/18/2010 3/18/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/17/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000673 PSF22-000672 PSF22-000671 PSF22-000670 PSF22-000669 PSF22-000668 PSF22-000667 PSF22-000666 PSF22-000665 PSF22-000664 PSF22-000663 PSF22-000662 PSF22-000661 PSF22-000660 PSF22-000658 PSF22-000657 PSF22-000656 PSF22-000655 PSF22-000654 PSF22-000653 PSF22-000641 PSF22-000584 PSF22-000587 PSF22-000588 PSF22-000586 PSF22-000585 PSF22-000589 PSF22-000591 PSF22-000634 PSF22-000601 PSF22-000599 PSF22-000598 PSF22-000597 PSF22-000596 PSF22-000595 PSF22-000594 PSF22-000593 PSF22-000592 PSF22-000614 PSF22-000613 PSF22-000612 PSF22-000611 PSF22-000609 PSF22-000606 PSF22-000605 PSF22-000603 PSF22-000602 PSF22-000633 PSF22-000632 PSF22-000631 PSF22-000630 PSF22-000629 PSF22-000627 PSF22-000626 PSF22-000625 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTMFG74-B-A01, ELECTRICAL IDENTIFICATION TAPE 5PTMFG71, POLYTETRAFLUOROETHYLENE SPIRAL WRAP TUBING 5PTMFG70, PRESSURE SENSITIVE SILICONE ADHESIVE GLASS CLOTH 5PTMFG69, WHITE ELECTRICAL HARNESS MARKING TAPE 5PTMFG67, SILICONE AND ACRYLIC ADHESIVE TEFLON TAPE 5PTMFG53 C, OIL AND HYDRAULIC FLUID RESISTANT ADHESIVE BACKE 5PTMFG47 A, ADHESIVE BACKED ALUMINUM FOIL TAPE 5PTMFG15 C, NON-STRUCTURAL, MEDIUM TACK, ADHESIVE FILM 5PTMFG14A, DOUBLE BACKED ADHESIVE TAPE 5PTMFG13, INSULATION TEDLAR TAPE 5PTMFG00, POLYIMIDE FILM TAPE, ADHESIVE BACKED 5PTMEL04-A, POLYETHER URETHANE, MOLDED 5PTMEL02, RUBBER, FLUOROSILICONE, SHEET, MOLDED AND EXTRUDED 5PTMEL01-A, RUBBER, SILICONE, TEMPERATURE AND TEAR RESISTANT 5PTMEG71, CLOSED CELL SILICONE SPONGE SHEET 5PTMEG32A, SILICONE HEAT SINK COMPOUND 5PTMEG24A, LOW AND HIGH TEMP AND TEAR RESISTANT SILICONE 5PTMDT05-C, CORE, HONEYCOMB, ALUMINUM ENHANCED CORROSION 5PTMDT04-C, ADHESIVE, THERMOPLASTIC FILM 5PTMDT02-B, BMI FOAMING CORE SPLICE ADHESIVE 5PTMDG02B, FLEXIBLE 5052 ALLOY ALUMINUM HONEYCOMB CORE 5PTM1T01-D, WIRE, ELECTRICAL, FLUOROCARBON POLYIMIDE 5PTM1T04-E, FA22 DATA BUS CABLE 5PTM1T05-C, WIRE, ELECTRICAL, EXTRUDED CROSS-LINKED 5PTM1T03-D, CABLE, POWER, ELECTRICAL AND CABLE SPECIAL 5PTM1T02-C, CABLE, FIBER OPTICS, GENERAL SPECIFICATION FOR 5PTM1T06, INSTRUMENTATION MULTI-CONDUCTOR CABLE 5PTM1T08, INSTRUMENTATION COAXIAL CABLE 5PTMBT11-A-A01, PREPREG, GRAPHITE FABRIC AND COPPER MESH 5PTM6T01, ALLOY BARS, CORROSION RESISTANT, 20CR-35NI-35CO-10 5PTM5L01, ALUMINUM ALLOY FORGINGS 7050-01, HIGH TEMPERATURE 5PTM4T02, TITANIUM ALLOY EXTRUSIONS, TI-6AL-4V, BETA PROCESS 5PTM4T01-A, ALUMINUM BERYLLIUM EXTRUSIONS 5PTM4L02-A, 7050-T6511 OR 7050-O EXTRUSIONS 5PTM4G10 REV B, ALUMINUM ALLOY EXTRUDED SHAPES 5PTM3T02, ALUMINUM BERYLLIUM ALLOY 363, INVESTMENT CASTINGS 5PTM1T10-A01, BRAID, WIRE, TUBULAR, NICKEL COATED 5PTM1T09, INSTRUMENTATION THERMOCOUPLE CABLE 5PTM7T13-C-A01, 7475-O ALUMINUM ALLOY SHEET AND PLATE 5PTM7T10-A, AL-BE MET TM AM162, SHEET PLATE 5PTM7T08-A-A02, ALUMINUM ALLOY PLATE, 7050-T7451 5PTM7T07, ALUMINUM ALLOY PLATE 5PTM7T02, TITANIUM ALLOY SHEET, DAMAGE TOLERANT GRADE 5PTM7G26-A, BERYLLIUM-BERYLLIUM OXIDE CONSTRAINING CORE 5PTM7G22 REV A, 2024-T3, -T81, -T351, -T851 ALUM SHEET AND 5PTM7G09, ALUMINUM ALLOY PLATE, 2121-T851 FRACTURE TOUGHNESS 5PTM7G08-D AMD 1, ALUMINUM ALLOY PLATE, 2124-T8151 FRACTURE 5PTMBT10-B-A01, PREPREG, GRAPHITE FABRIC AND COPPER MESH, 5PTMBT09-C, PREPREG, E GLASS FABRIC POLYMIDE RESIN IMPREGNAT 5PTMBL05-A, PREPREG, E GLASS FABRIC, CYANATE ESTER RESIN, 5PTMBT08-H, PREPREG, WOVEN FABRIC, EPOXY RESIN IMPREGNATED, 5PTMBL04-A, PREPREG, QUARTZ FABRIC, CYANATE ESTER RESIN, FOR 5PTMBT07-E, PREPREG, E GLASS FABRIC, WOVEN EPOXY RESIN 5PTMBL02-B, GLASS FABRIC, PREIMPREGNATED, EPOXY RESIN 5PTMAT12-A, TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR Issued Date 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/16/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000624 PSF22-000623 PSF22-000622 PSF22-000621 PSF22-000619 PSF22-000618 PSF22-000617 PSF22-000616 PSF22-000615 PSF22-000590 PSF22-000536 PSF22-000540 PSF22-000541 PSF22-000539 PSF22-000538 PSF22-000542 PSF22-000544 PSF22-000571 PSF22-000570 PSF22-000569 PSF22-000568 PSF22-000567 PSF22-000566 PSF22-000565 PSF22-000564 PSF22-000563 PSF22-000582 PSF22-000581 PSF22-000580 PSF22-000579 PSF22-000578 PSF22-000577 PSF22-000576 PSF22-000575 PSF22-000574 PSF22-000573 PSF22-000572 PSF22-000562 PSF22-000560 PSF22-000559 PSF22-000558 PSF22-000557 PSF22-000556 PSF22-000555 PSF22-000554 PSF22-000553 PSF22-000552 PSF22-000551 PSF22-000550 PSF22-000549 PSF22-000548 PSF22-000547 PSF22-000546 PSF22-000543 PSBO-002175 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTMAT11-A, BIAXIAL CARBON FIBER REINFORCED THERMOPLASTIC 5PTMAT10-B, UNIDIRECTIONAL CARBON FIBER REINFORCED 5PTMAT09-E, NARROW WIDTH EPOXY IMPREGNATED CARBON FIBER TOW 5PTMAT05-D, BIAXIAL TAPE, DRY THERMOPLASTIC RESIN IMPREGNATE 5PTMAT03-E, TAPE, CARBON FIBER, DRY THERMOPLASTIC RESIN 5PTMAT02-H, TAPE, CARBON FIBER, EPOXY RESIN IMPREGNATED, FOR 5PTM9T01-A, TITANIUM ALLOY WELD WIRE, TI-6AI 2SN-2ZR-2MO-2C 5PTM8L02, TUBING, TITANIUM, WELDED 5PTM8G01, TUBING, TITANIUM, WELDED 5PTM1T07, INSTRUMENTATION CAIS BUS TWINAXIAL CABLE 5PC00837-03, STRUCTURAL DEVELOPMENT TEST REPORT-COMPOSITE 5PC01286 REV A, F22 PRODUCTION PROGRAM NDI PLAN 5PD00025 REV C, VRP PLAN DIFFERENCES 5PC00840-29, F22 STRUCTURAL DEVELOPMENT TESTS CENTER FUSE5PC00837-11, FA22 STRUCTURAL DEVELOPMENT TESTS GENERIC TEST 5PD00078, F22 STRUCTURAL DEVELOPMENT TEST PROCEDURES FOR 5PD00119, F22 DEPOT AUTOMATIC TEST SYSTEM REQUIREMENTS 5PD42355, DIMENSIONAL REQUIREMENTS FOR TITANIUM FORGINGS 5PD42289A, ITEM UNIGUE IDENTIFICATION DIRECTIONS FOR LOT 6 5PD42222, FA INTERCHANGEABLE ALTERABLE PROCEDURES 5PD42221, FA22 WORKMANSHIP STANDARD 5PD42207-F, BAGGING PROCEDURES FOR F22 COMPOSITE PARTS AND 5PD42174, DATA RELEASE RECORD 5PD42081, TEST PLAN FOR QUALIFICATION TO 5PTMCG05 5PD41784F, FA-22 WELDING SCHEDULES 5PD42045-A, F22 DATA RELEASE RECORD COMPOSITE_MATERIAL_SPECIFICATION_CALLOUTS_FOR_F22_PRODUCTION 5PTR5200-A, FA22 INSTALLED ROTARY LATCH RIGGING INSTRUCTIONS 5PTR5103, SIDE WEAPON BAY DOOR DRIVE SYSTEM INSTALLATION AND 5PTF4054N, HIGH PERFORMANCE COAX CABLE TEST REEQUIREMENTS 5PTF4002B, FUNCTIONAL TEST REQUIREMENTS-FUEL SYSTEM, BEFORE 5PTA3361A, GUN SYSTEM INSTALLATION PROCEDURES 5PTA3148B, CRITICAL ITEM DEVELOPMENT SPECIFICATION FOR 5PTA0046B, ELECTRICAL BONDING REQUIREMENTS FOR THE F22 AIR 5PTA0015C, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENT 5PTA0003C, FORMERLY 52A5059, PARTS, MATERIALS, PROCESSES AND 5PD42781-A, ACCEPTANCE PLAN FOR PRESHAPED BAGGING KITS FOR 5PD41739, F22 MID FUSELAGE FUEL SEAL VERIFICATION COMPONENT 5PD41489, REVISED TEST PLAN FOR THE F22 MID FUSELAGE FUEL 5PD41351A, ASSEMBLY PROCESS AND INTERNAL LRU WIRING SPECIF5PD41327C, ORDER OF PRECEDENCE OF CONTROL MEDIA FOR THE F22 5PD41325, FASTNER HOLES IN METAL STRUCTURE FOR AMAD ACCESS 5PD41244D, SIGNATURE SHEET FOR ENGINEERING MANUFACTURING 5PD41207F, INSTRUCTIONS FOR MANUFACTURE OF WIRE HARNESSES 5PD40457A, CORRECTIVE ACTION AND DISPOSITION PROCESS FOR 5PD01536, INSPECTION PROCEDURE AND ACCEPTANCE CRITERIA FOR 5PD01122, FA22 MAJOR MATE JOINT GAP AND MISMATCH REQUIREMENT 5PD01119A, FA22 BASELINE VENTILATION AND DRAINAGE PATHWAYS 5PD01024, CYTEC FIBERITE 5PTMAT10 QUALIFICATION REPORT: 5PD01019 REV K, F22 AIRCRAFT STRUCTURAL CONFIGURATION FOR 5PD00553, ANALYSIS OF BERYLLIUM AND BERYLLIUM ALLOY 5PD00519D, F22 AIRFRAME REPAIR DEVELOPMENT PLAN 5PD00202A, TEST PLAN TO QUALIFY COMPOSITE MATERIALS TO F22 5PD00083B, SUPPLIER QUALITY ASSURANCE REQUIREMENTS FOR ST5M1396 REV K, CONNECTOR-COAX, PLUG, TNC, PRECISION, POLARI Issued Date 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/15/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/11/2010 3/10/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002176 PSBO-002178 PSF22-000390 PSF22-000334 PSBO-002180 PSBO-002179 PSF35-000102 PSF35-000100 PSF22-000514 PSF22-000513 PSF22-000512 PSF22-000510 PSF22-000509 PSF22-000508 PSF22-000507 PSF22-000505 PSF22-000504 PSF22-000526 PSF22-000524 PSF22-000522 PSF22-000521 PSF22-000520 PSF22-000519 PSF22-000518 PSF22-000517 PSF22-000515 PSF22-000533 PSF22-000532 PSF22-000531 PSF22-000530 PSF22-000529 PSF22-000528 PSF22-000527 PSF22-000503 PSF22-000502 PSF22-000500 PSF22-000499 PSF22-000497 PSF22-000496 PSF22-000495 PSF22-000494 PSBO-002177 PSF22-000437 PSF22-000441 PSF22-000443 PSF22-000445 PSF22-000448 PSF22-000452 PSF22-000455 PSF22-000493 PSF22-000492 PSF22-000491 PSF22-000490 PSF22-000489 PSF22-000488 Rev. A A B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5M1681 REV D, KNOW, NON-ILLUMINATED-PUSH, SPECIAL SHAPE 5M1822 REV R, RESISTOR ASSEMBLY- MATCHED SET 5PTPEL04-D-A01, BRAZING OF ALUMINUM 5PTPBG20E, APPLICATION OF LIQUID SHIM MATERIAL ST9M470 REV J, MOUNT, RESILIENT-HELICAL ISOLATOR 7M1255 REV A, CAP, QUICK DISCONNECT -PROTECTIVE, DUST AND MO LMA-PB037D, INSTALLATION OF EXPANDED FUEL FITTINGS LMA-D0029C, ADOPTION OF LM AERO SPECIFICATIONS 5PTPTL15-A, LASER ETCHING 5PTPTL14, STORAGE, HANDLING, ISSUANCE AND AGE CONTROL OF 5PTPTL13-A, CASTINGS AND FORGINGS, DIMENSIONAL CONTROL OF 5PTPRT22-A-A01, WAVEGUIDE ASSEMBLY AND INSTALLATION 5PTPRT20-B, IN PROCESS FIBER OPTIC TESTING 5PTPRT19-A, SOLDERING-ELECTRICAL CONNECTIONS 5PTPRT18-D, FIBER OPTIC TERMINATION AND ASSEMBLY 5PTPRT12-C-A03, COAX CABLE ASSEMBLY AND INSTALLATION 5PTPRT11-B-A02, ELECTRICAL CONDUIT, ASSEMBLY AND INSTALLATIO 5PTPUL02, APPLICATION OF SCALE INHIBITING COMPOUND 5PTPTT11-C, SELECTED SAFETY, MISSION, AND DURABILITY 5PTPTL28, TOUCH UP OF LOW OBSERVABLES COATINGS 5PTPTL26, THERMO-FORMING OF 5PTMKL16 MATERIAL 5PTPTL23-A-A02, APPLICATION OF 5PTMRL21 EXTERIOR POLYURETHAN 5PTPTL22-B, APPLICATION OF 5PTMRL07 EXTERIOR COATING 5PTPTL21-A, INSTALLATION OF REMOVABLE AND PERMANENT EXTERNAL 5PTPTL19-B-A02, CONDUCTIVITY AND HARDNESS TESTING OF 5PTPTL16-A, METALIZATION OF QUARTZ CYANATE ESTER LAMINATE 5PTPYL02, APPROVED LM AERO FW PS FOR SUBSTITUTION OF LM AERO 5PTPWG06, APPLICATION OF VARNISH COATING TO F22 AIM 9 POWER 5PTPWG05, APPLICATION OF A LAMINATING, POTTING, OR CONFORMAL 5PTPWG04, GENERAL PURPOSE BONDING APPLICATIONS FOR F22 5PTPWG03, APPLICATION OF THERMALLY CONDUCTIVE ADHESIVES FOR 5PTPWG02A, PROCESSING OF SYNTACTIC FOAM POWDER FOR THE F22 5PTPWG01A, PS FOR SILICONE RUBBER ENCAPSULATION COMPOUND, 5PTPRT10-A-V01, HEAT SHRINKABLE MATERIALS ON ELECTRICAL 5PTPRT09-C, ASSEMBLY AND INSTALLATION OF FIVER OPTICS CABLE 5PTPRT02-B, OVERBRAIDING ON WIRE BUNDLES 5PTPRG01E AMD 1, ELECTRICAL BONDING 5PTPPL06A-VO1, CONTAMINATION CONTROL OF HYDRAULIC SYSTEMS 5PTPPL05-A, CONTAMINATION CONTROL - OXYGEN SYSTEMS 5PTPPL04-C, CONTAMINATION CONTROL-LUBRICATING AND PRESERVING 5PTPPL03-A, FUEL AND FUEL SYSTEMS CONTAMINATION AND CONTROL 5M1774 REV E, KNOB-CONCENTRIC, NON ILLUMINATED 5PTPJL11, APPLICATION AND REMOVAL OF TEMPORARY PROTECTIVE 5PTR5106 REV A, ENGINEERING TECHNICAL SOURCE DATA, F22 GUN 5PTPJL26-C, APP OF ANTISTATIC RAIN EROSION COATING SYSTEM 5PTPJL28-A-A02, APP OF 5PTMRL29 POLYURETHANE STENCIL ENAMEL 5PTPJL38-B, APP OF CANOPY REPAIR FILM 5PTPJT21-V01, APP OF 5PTMRT06 POLYURETHANE FOAM COATING 5PTPKG06-D, PROCESS AND QUALITY CONTROL OF F22, HIGH TEMP 5PTPNL05-C, APP PROCEDURES FOR F22 TUBE MARKING TAPES 5PTPNL04, PROCESSING OF NAMEPLATES AND OTHER PARTS REQUIRING 5PTPNL03-A, PROCEDURES FOR MARKING BY THE ELECTROCHEMICAL 5PTPMT02-B-A01, LUBRICANT, SOLID FILM, AIR-DRYING AND HEAT5PTPMT01-A, LUBRICATION OF FA 22 AIRCRAFT 5PTPLT01-B, COMPOSITES, BISMALEIMIDE, FABRICATION OF Issued Date 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/10/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000487 PSF22-000486 PSF22-000484 PSF22-000483 PSF22-000482 PSF22-000481 PSF22-000480 PSF22-000479 PSF22-000478 PSF22-000477 PSF22-000475 PSF22-000471 PSF22-000468 PSF22-000467 PSF22-000466 PSF22-000465 PSF22-000463 PSF22-000462 PSF22-000460 PSF22-000459 PSF22-000458 PSF22-000457 PSF22-000456 PSF22-000454 PSF22-000449 PSF22-000446 PSF22-000444 PSF22-000442 PSF22-000438 PSF22-000440 PSF22-000184 PSF22-000435 PSF22-000434 PSF22-000433 PSF22-000395 PSF22-000394 PSF22-000393 PSF22-000391 PSF22-000389 PSF22-000388 PSF22-000387 PSF22-000386 PSF22-000197 PSF22-000406 PSF22-000405 PSF22-000404 PSF22-000403 PSF22-000402 PSF22-000401 PSF22-000400 PSF22-000397 PSF22-000396 PSF22-000432 PSF22-000431 PSF22-000430 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A A A A A A A A A A C A A A A A A A A A A A A Title 5PTPLL28, FABRICATION AND INSPECTION OF THE ALTERNATE 5PTPLL27, FABRICATION OF THE SHROUD 5PTPLL21-G-A02, FABRICATION AND ACCEPTANCE OF F22 HORIZONTAL 5PTPLL19-F, FABRICATION OF EPOXY COMPOSITES 5PTPLL18, TWIN SHEET FORMING OF THERMOPLASTICS 5PTPLL16-E, FABRICATION AND ASSEMBLY OF THE INTEGRATED 5PTPLL14-F-A02,FABRICATION AND ACCEPTANCE OF E-GLASS FABRIC 5PTPLL05-C, FABRICATION OF CARBON AND GLASS FABRIC REINFORCE 5PTPLG33B AMD 1, INSTALLATION OF SHRINK FIT BEARINGS 5PTPLG26-D, PROCESSING AND QUALITY CONTROL OF GLASS REINFORC 5PTPLG04-F, PS FOR THE MANUFACTURE AND QUALITY CONTROL OF 5PTPKT04-A, FABRICATION AND ACCEPTANCE OF COCURE CARBON 5PTPKL19-B, DIAPHRAGM FORMING CONSOLIDATION AND DUAL RESIN 5PTPKL18, DIAPHRAGM FORMING CONSOLIDATION AND DUAL RESIN 5PTPKL04-D-A01, FABRICATION AND ASSEMBLY OF HONEYCOMB 5PTPKL01-A, ADHESIVE BONDING, STRUCTURAL METAL TO METAL 5PTPKG18, PS FOR SOFT BONDING EPOXY GLASS CIRCUIT CARD 5PTPKG17-A, HONEYCOMB CORE DETAIL MANUFACTURE 5PTPKG11, ADHESIVE BONDING OF ELECTRONIC COMPONENTS 5PTPKG10, ADHESIVE BONDING OF ELECTRONIC COMPONENTS 5PTPKG09, ADHESIVE BONDING OF ELECTRONIC COMPONENTS 5PTPKG08A, PROCESS GUIDELINES FOR BONDING POLYIMIDE PRINTED 5PTPKG07-F, PROCESS AND QUALITY CONTROL OF F22 ADHESIVE 5PTPKG01A AMD 1, INSTALLATION OF STRAIN GAGES 5PTPJL39, REMOVAL OF COATINGS FROM PEEK SURFACES BY DRY 5PTPJL35-A, APP OF 5PTMRL35 5PTPJL27, EXTERIOR COATING SYSTEMS REQUIREMENTS, F22 AIRCRAF 5PTPJL21-B-A01, APP OF HIGH TEMPERATURE EXTERIOR TOPCOAT 5PTPJL13-H, TOUCHUP AND OVERCOATING REQUIREMENTS FOR ORGANIC 5PTPJL20-A, APPLICATION OF HIGH TEMPERATURE EXTERIOR PRIMER 5PTPFG02F AMD 1, ENVIRONMENTAL AND PRESSURE SEALING F-22 5PTPJL03-A, APP OF 5PTMRL17 TYPE1 PRETREATMENT PRIMER 5PTPJG01-B AMD 4, FINISH SPEC FOR F22 WEAPON SYSTEM 5PTPHL26, APP OF COATINGS BY THE HIGH VELOCITY OXYGEN FUEL 5PTPFG07 REV A AMD 1, PROCEDURE FOR APPLICATION OF SILICONE 5PTPET02-A-V01 AUTOMATIC ARC WELDING OF TUBULAR JOINTS 5PTPEL11, FUSION WELDING - METALS GROUND SUPPORT EQUIPMENT 5PTPEL09-A, COATING, FLAME DEPOSTION, SUPER D-GUN PROCESS 5PTPEG82 REV A, IN-PROCESS WELDING OF CASTINGS, ENGINEERING 5PTPEG05 AMD 3, WELDING OF STANDARD JOINTS, ENGINEERING AND 5PTPDT01-A, HEAT TREATMENT OF AERMET 100 STEEL 5PTPAG18 REV C, FORMING OF ALUMINUM ALLOYS 5PTPFG01J AMD 1, INTEGRAL FUEL TANK SEALING F-22 MID FUSELA 5PTPFT07, ENVIRONMENTAL AND PRESSURE SEALING REPAIR OF F22 5PTPFT06, BLOCKING OF GAPS IN F22 NON FUELED STRUCTURE 5PTPFT04-A, APP OF JOINT SPLICE MATERIAL 5PTPFT03-B, REPAIR OF FA 22 FUEL TANK LEAKS 5PTPFT02-E-A01, ENVIRONMENTAL AND PRESSURE SEALING OF F22 5PTPFT01-E, INTEGRAL FUEL TANK SEALING OF THE FA 22 AIRCRAFT 5PTPFL05-A, INSTALLATION OF SEALANT IN SEPARABLE FAYING SURF 5PTPFL01-H-A01, INTEGRAL FUEL TANK SEALING, FORWARD FUSELAGE 5PTPFG08A, PROCESS FOR APPLICATION OF POLYURETHANE FOAM IN 5PTPHL25, SODIUM AMMONIA ETCHING OF PERFLUOROALKOXY FILM 5PTPHL24-A, NICKEL AND CADMIUM PLATING, ELECTRODEPOSITED 5PTPHL22-B, CORROSION RESISTANT COPPER PLATING OF ALUMINUM Issued Date 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/9/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000428 PSF22-000426 PSF22-000420 PSF22-000417 PSF22-000416 PSF22-000415 PSF22-000414 PSF22-000413 PSF22-000412 PSF22-000411 PSF22-000410 PSF22-000409 PSF22-000408 PSF22-000407 PSBO-001501 PSBO-002173 PSNG-000047 PSNG-000048 PSBO-002163 PSBO-002166 PSBO-002170 PSBO-002167 PSBA-000004 PSBO-001666 PSBO-002159 PSBO-002161 PSBO-002162 PSBO-002160 PSBO-002157 PSBO-002155 PSBA-000001 PSBA-000002 PSBO-001486 PSBO-002154 PSBO-001515 PSF22-000017 PSBO-001390 PSBO-002137 PSBO-002141 PSBO-002145 PSBO-002142 PSBO-001161 PSBO-002124 PSBO-002126 PSBO-002128 PSBO-002131 PSF35-000099 PSF35-000016 PSBO-002136 PSBO-002134 PSBO-002133 PSBO-002132 PSBO-002129 PSBO-002127 PSBO-002125 Rev. A A A A A A A A A A A A A A B A B B A A A A A B A A A A A A A A B A B D B A A A A B A A A A A B A A A A A A A Title 5PTPHL18-A, CHEMICAL PROTECTIVE FILM TREATMENT FOR ALUMINUM 5PTPHL16-A, PASSIVATION OF STAINLESS STEELS 5PTPJL09-D, APPLICATIONS OF METALLIC- CERAMIC COATINGS 5PTPHG16-A, CONVERSION COATING OF TITANIUM ALLOYS 5PTPGT03-A, CLEANING OF THE F22 VEHICLE 5PTPGL12, EXTERIOR CLEANING OF THE F/A 22 AIRCRAFT 5PTPGL10-A, CLEANINESS AND PACKAGING REQUIREMENTS FOR 5PTPGL09, CLEANING OF COPPER AND COPPER ALLOYS 5PTPGL08, STRIPPING OF ORGANIC FINISHES (PAINTS), F22 5PTPGL06-H, CLEANING OF PLUMBING LINES, AND RELATED COMPONEN 5PTPGL04-A-A01, CLEANING OF CORROSION AND HEAT RESISTANT 5PTPGL03-D, CLEANING OF ALUMINUM AND ALUMINUM ALLOYS 5PTPGL02-B, CLEANING OF CARBON AND LOW ALLOY STEELS. 5PTPGG06, CLEANING OF F22 PLUMBING LINES DPS3.809 REV T INTERNALLY SWAGED 7D0197 AND 7D0259 FERRULES 4M394 REV A, BEARING, PLAIN, SELF ALIGNING, THREADED OUTER R PS21211.4 REV U ULTRASONIC INSP OF COMP LAMINATES, STRUCTURE PS21233 REV K NONDESTRUCTIVE TESTING OF HONEYCOMB ASSY 4M286 REV C, BEARING, PLAIN, SELF-ALIGNING 7M685 REV A, COUPLING HALF, QUICK DISCONNECT, NON-SELF SEALI 30M-MS3367, MS3367, BOEING ST. LOUIS SUPPLEMENT FOR ST9M559 REV K, STRAP, TIEDOWN, PLASTIC. SC1 PARTS 1-7 APPENDIX 1 DATED 10-2009 ST3M466 REV AE, SCREW, CLOSE TOLERANCE - 100 DEG REDUCED HEA 5M3018 REV C, LIGHT ASSEMBLY, INDICATOR, NVIS COMPATIBLE BAC5317 PSD6-134, FIBER REINFORCED COMPOSITE PARTS BAC5317 PSD6-149, FIBER REINFORCED COMPOSTIE PARTS BAC5317 PSD6-131, FIBER REINFORCED COMPOSITE PARTS 5M3014 REV B, LIGHT ASSEMBLY INDICATOR, NVIS COMPATIBLE ST5M1339 REV N, CABLE, REF-COAXIAL, 50 OHM BAES-JSF-QMS-141-03-DV, SUPPLEMENTARY QUALITY REQUIREMENTS BAES-JSF-QMS-351 0-07 -UG ISSUE 3, GUIDANCE FOR SUPPLIERS TO DPS1.834-12, REV AC, ELECTRICAL IDENTIFICATION & SHOP PRACT PS23052 REV D ACCEPTANCE PRO FOR WROGHT METALLIC RAW MAT 30M-NASM14181 REV B, BOEING-ST. LOUIS SUPPLEMENT FOR 5PTMCT01-QPL-14 MATERIAL SPEC QUALIFIED PRODUCT LIST FOR PS17150.2 REV P, EQUIPTMENT, TOOLING & PROCEDURES FOR CRIMPI BAC5701 PSD6-57, CADMIUM PLATING BAC5771 PSD6-80, STRIPPING INORGANIC FINISHES BAC5001 PSD6-152, FLUID LINES, FITTINGS AND PRESSURES TESTIN BAC5771 PSD6-81, STRIPPING INORGANIC FINISHES BAC5001-12 REV A FORMING AND STRAIGHTENING OF DUCTS BAC5408 PSD6-61, VAPOR DEGREASING BAC5602 PSD6-200, HEAT TREATMENT OF ALUMINUMALLOYS BAC5609 PSD6-7, DOW 7 TREATMENT OF MAGNESIUM ALLOYS BAC5975 PSD6-41, FUSION WELDING OF METALS 2ZZZ00017 ANNEX 1, FILLED ELASTOMERIC SEALS AND GASKETS 2ZZA05002C APPROVED MATERIALS FOR F-35 FRAC CRICTICAL AND MA BAC5710 PSD9-22, APP OF SPECIAL PURPOSE COATINGS BAC5946 PSD6-57, TEMPER INSPECTION OF ALUMINUM ALLOYS BAC5940 PSD6-7, SILVER BRAZING BAC5975 PSD6-42, FUSION WELDING OF METALS BAC5609 PSD6-9, DOW 7 TREATMENT OF MAGNESIUM ALLOYS BAC5617 PSD6-87, HEAT TREATMENT OF ALLOY STEELS BAC5602 PSD6-195, HEAT TREATMENT OFALUMINUM ALLOYS Issued Date 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/8/2010 3/4/2010 3/3/2010 2/25/2010 2/25/2010 2/24/2010 2/24/2010 2/24/2010 2/24/2010 2/23/2010 2/22/2010 2/22/2010 2/22/2010 2/22/2010 2/22/2010 2/22/2010 2/22/2010 2/19/2010 2/19/2010 2/18/2010 2/18/2010 2/18/2010 2/18/2010 2/17/2010 2/17/2010 2/17/2010 2/17/2010 2/17/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 2/16/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002123 PSBO-001236 PSSA-000259 PSSA-000260 PSSA-000262 PSSA-000015 PSSA-000040 PSSA-000095 PSSA-000096 PSSA-000072 PSSA-000257 PSSA-000256 PSSA-000255 PSSA-000246 PSSA-000245 PSSA-000244 PSSA-000243 PSSA-000242 PSSA-000037 PSSA-000038 PSSA-000228 PSSA-000238 PSSA-000236 PSBO-002117 PSBO-002119 PSBO-002122 PSSA-000213 PSSA-000208 PSSA-000206 PSSA-000058 PSNG-000055 PSBO-002121 PSBO-002118 PSBO-002114 PSSA-000146 PSSA-000189 PSSA-000191 PSSA-000204 PSSA-000203 PSSA-000202 PSSA-000192 PSSA-000190 PSSA-000185 PSSA-000025 PSBO-002115 PSBO-000796 PSBO-002113 PSBO-002096 PSBO-002098 PSBO-002112 PSBO-002105 PSBO-002104 PSBO-002103 PSBO-002102 PSBO-002100 Rev. A B A A A B B B B C A A A A A A A A B B A A A A A A A A A B B A A A B A A A A A A A A B A B A A A A A A A A A Title BAC5408 PSD6-60, VAPOR DEGREASING BAC5408 PSD6-57 VAPOR DEGREASING SS8409 REV 6 AMD 4, PLATING, CYANIDE COPPER STOP OFF FOR COA SS8607 REV 8 AMD 2, ADHESIVE BONDING, SYSTEM C MAIN AND SS8613 REV 3 AMD 2, SCRIM CLOTH AND POSITIONING MAT SS9152/PP0401 REV 01 - RESIN FLOW TEST (NO BLEEDER) SS9574 REV 03 CLOTH, GLASS, FINISHED, FOR PLASTIC LAMINATES SS9170 REV 2 EXPENDABLE MANUFACTURING MATERIALS SS9502 REV 7 ADHESIVE, EPOXY BASE, EXPANDING SS9070 REV 10 SERIAL NUMBER AND TRADEMARK IDENTIFICATION O SS9638 REV 0 AMD 3, PERFORATED COPPER FOILS SS9638 REV 0 AMD 2, PERFORATED COPPER FOILS SS9638 REV 0 AMD 1, PERFORATED COPPER FOILS SS9170/101 REV 0, EXPENDABLE MANUFACTURING MATERIALS (EMM) SS9170/100 REV 1, (EMM) ABRASIVE BLAST MEDIA,PLASTIC, CL 2 SS9152/PP0902 REV 1 AMD 1, MEASUREMENT OF RESIN CONTENT SS9152/PP0901 REV 1 AMD 2, MEASUREMENT OF RESIN CONTENT SS9152/PP0901 REV 1 AMD 1, MEASUR OF RESIN CONTENT SOLVENT SS8655 REV 5 COATING, PERMANENT RESIN, APPLICATION OF SS9001 REV 33 TRADEMARKS AND SIGNATURES FOR PRODUCTS ID SS8655 REV 5 AMD 1, COATING, PERMANENT RESIN, APP OF SS8810 REV 0 DEV 3, ELECTRICAL CONDUCTIVITY TEST FOR MEASURE SS8712 REV 1, ETCHING REMOVAL OF FLOWED METAL ST5M1333 REV J, CONNECTOR, COAXIAL, HN PLUGS, SOLDER TYPE 5M2504 (B) - KNOB - POINTER, ILLUMINATE, OUTER CON SHAFT USE 5M3076 (C) - LIGHT ASSEMBLY-INDICATOR NIGHT SS8613 REV 3 AMD 1, SCRIM CLOTH AND POSITIONING MAT, FINISH SS8606 REV 3 AMD 1, ADHESIVE BONDING, SYSTEM B. SS8809 REV 2 AMD 1, INSPECTION, ULTRASONIC, NON-METALICS SS8613 REV 3 SCRIM CLOTH AND POSITIONING MAT, FINISHED AND U PS14034 REV AC LAMINATES, REINFORCED PLASTIC, FABRICATION OF 5M2505 (B) - KNOB-PUSH BUTTON, JETTISON 5M1800 (E) - CONNECTOR - COAXIAL, RADIO FREQ, BNC INLINE REC 7M640REP, VALVE ELEMENT - SWING CHECK, FUEL SS8043 REV 5 ALUMINUM ALLOYS, HEAT TREATABLE WROUGHT ALLOYS SS8409 REV 6 AMD 1, PLATING, CYANIDE COPPER SS8409 REV 6 AMD 3, PLATING, CYANIDE COPPER SS8813 REV 3 DEV 2, NONDESTRUCTIVE INSPECTION PLAN SS8813 REV 3 DEV 1, NONDESTRUCTIVE INSPECTION PLAN SS8813 REV 3 AMD 1, NONDESTRUCTIVE INSPECTION PLAN SS8423 REV 5 AMD 3, DEGREASING OF METAL PARTS SS8409 REV 6 AMD 2, PLATING, CYANIDE COPPER SS8809 REV 2 AMD 2, INSPECTION, ULTRASONIC, NON-METALICS, SS8813 REV 3, NONDESTRUCTIVE INSPECTION PLAN MMS5049 ADD 1 REV B, APPROVED MMS5049 MS STF1604 FINISH INSTRUCTION PS14280 REV F, PLASTIC INJECTION MOLDINGS, BAC5000 PSD6-211, SEALING, GENERAL BAC5000 PSD6-222, SEALING, GENERAL BAC5665 PSD6-3, APPLICATION OF SOL-GEL BAC5719 PSD9-8, CHEMICAL CONVERSIONCOATINGS FOR ALUMINUMAND BAC5719 PSD6-150, CHEMICAL CONVERSION COATINGSFOR ALUMINUM A BAC5719 PSD6-149, CHEMICAL CONVERSION COATINGSFOR ALUMINUM A BAC5000 PSD6-227, SEALING, GENERAL BAC5000 PSD6-225, SEALING, GENERAL Issued Date 2/16/2010 2/16/2010 2/15/2010 2/15/2010 2/15/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/12/2010 2/11/2010 2/11/2010 2/11/2010 2/11/2010 2/11/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/10/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/9/2010 2/8/2010 2/8/2010 2/5/2010 2/5/2010 2/5/2010 2/5/2010 2/5/2010 2/5/2010 2/5/2010 2/5/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002099 PSBO-002097 PSBO-001408 PSBO-002076 PSBO-002078 PSBO-002081 PSBO-002077 PSBO-002071 PSBO-000877 PSBO-000908 PSBO-002059 PSBO-002060 PSBO-002065 PSBO-002068 PSBO-002069 PSBO-002067 PSBO-002061 PSBO-002055 PSBO-002057 PSBO-002056 PSBO-002049 PSBO-002052 PSNG-000033 PSBO-002051 PSBO-000414 PSNG-000014 PSBO-002047 PSBO-002046 PSF22-000179 PSBO-000047 PSBO-000048 PSSA-000184 PSSA-000183 PSSA-000182 PSSA-000181 PSSA-000180 PSSA-000179 PSSA-000178 PSBO-000080 PSBO-000071 PSBO-000144 PSBO-000059 PSBO-000083 PSBO-000004 PSBO-000889 PSBO-000053 PSBO-002043 PSBO-000973 PSBO-001016 PSBO-001773 PSBO-002042 PSF22-000240 PSBO-002037 PSF22-000196 GPS-SHOP-0004 Rev. A A C A A A A A B C A A A A A A A A A A A A B A D B A A E G C A A A A A A A B C D E D C C H A B B B A B A B A Title BAC5000 PSD6-224, SEALING, GENERAL BAC5000 PSD6-220, SEALING, GENERAL PB10-694 AMENDMENT REV C, TO PS20101- PROTECTION OF ACRYLICS 5M2488 REV D, KNOB-POINTER, ILLUMINATED, WITH SERRATION GROO 7M1113 REV G, FILTER, FLUID, LIQUID COOLING SYSTEM BAC5307 PSD6-251, PART MARKING 5M2500 REV C, KNOB-POINTER, ILLUMINATED, TACTILE PS17048 REV D, LINEAR ROLLER STAKING OF SEAT RAILS (C17 AIR) DPS3.69-4 REV AP FORMING OF 7000 SERIES ALUMINUM ALLOYS EPB6-128 REV L, QUAL METHOD & REQ FOR FABR OF DRV SYS ROTR PS16011 REV T DEV 1 GKN-MARKING METHODS AND MATERIALS BAC5613 PSD9-28, HEAT TREATMENT OF TITANIUM AND TITANIUM AL BAC5034 PSD6-131, TEMP PROTECT OF PRODUCTION MATERIALS, PART BAC5009 PSD8-17, BOLT AND NUT INSTALLATION BAC5009 PSD8-18, BOLT AND NUT INSTALLATION BAC5435 PSD9-19, BEARING INSTALLATION AND RETENTION BAC5613 PSD9-29, HEAT TREATMENT OF TITANIUM AND TITANIUM AL BAC5300-2 PSD 6-1, METAL PART FORMING, STRAIGHTENING BAC5423 PSD6-158, PENETRANT METHODS OF INSPECTION BAC5300-2 PSD 6-2, METAL PART FORMING, STRAIGTENING, AND FIT PS20060 REV L, FUEL CELL, BLAD TYPE: INSPEC, REP AND TEST OF 30M-NAS1564, BOEING?ST. LOUIS SUPPLEMENT FOR NAS1564 PS14290 REV T, COMPOSITE AND BONDING CURE CYCLE PROCEDURES 7M494 REV C, ELBOW, TUBE ? 90,SWAGELOK TO FLARED SWIVEL NUT MMS INDEX PS11308 REV AA, BONDING WITH EPOXY ADHESIVES PS22250 REV K SUPP 1, 1149 , ARC FUSION WELDING STEELS AND C DPS2.50-17.1 REV E, SEALING TAPE - MATERIALS AND METHODS OF 5PTPJT23-H APPLICATION OF 5PTMRT01 ANTISTATIC COATING PS13001 REV T- PASSIVATION OF CORROSION AND HEAT RESISTING PS13101 REV V - PLATING, CADMIUM ELECTRO SUPPLEMENT 3 DAC CO SS8445 REV 7 DEV 1, TITANIUM ALLOY 6AL-4V FORGING, DYNAMIC G SS8445 REV 7 AM 5, TITANIUM ALLOY 6AL-4V FORGING, DYNAMIC GR SS8445 REV 7 AM 4, TITANIUM ALLOY 6AI-4V FORGING, DYNAMIC GR SS8445 REV 7 AM 3, TITANIUM ALLOY 6AI-4V FORGING, DYNAMIC GR SS8445 REV 7 AM 2, TITANIUM ALLOY 6AI-4V FORGINGS, DYNAMIC SS8445 REV 7 AM 1, TITANIUM ALLOY 6AL-4V FORGINGS, DYNAMIC SS8445 REV 7, TITANIUM ALLOY 6AI-4V FORGING, DYNAMIC GRADE PS14047 REV L - BONDING OF FAIRING ASSEMBLIES TO MOLD LINE S PS14057 REV M - FABRICATION AND INSPECTION OF FLEXIBLE DUCTS PS15709 REV F - HARDENING 7075 SHEET AND PLATE TO THE -T76 T PS13517 REV AA - PAINT OF DOUGLAS COMMERCIAL, C-17, T-38 A PS14098 REV K - FABRICATING TITANIUM AND TITANIUM ALLOYS (DP PS11002 REV T - NAMEPLATES, ADHESIVE BONDED IN PLACE, APPLIC 3M1249 REV H COLLAR, LOBULAR-PIN-RIVET, THREADED, SHEAR, ALU PS13209 REV W - COATING, MULTICOLORED CHEMICAL CONVERSION OF 5M3100 SENSOR DIELECTRIC PS21085 REV G ENVIRONMENTAL CONTROL SYSTEM, F/A-18 C/D, E/F 7M772 REV C COUPLING HALF, QUICK DISCONNECT - SELF SEALING, ST7M272 REV N, COUPLING, V-BAND-NO. 10 T-BOLT BAC5753 PSD6-160, CLEANING, DESCALING AND SURFACE PREP 5PTPGL05-QPL-3 QUALIFIED PRODUCERS LIST FOR 5PTPGL05 QTM 71-3111A, CASTABLE SILICONE RUBBER MATERIAL SPEC ENS1312 REV G EDDIE-BOLT 2 SYSTEM EDDIE-NUT PROCUREMENT SPEC TACKIFICATION OF BROADGOODS Issued Date 2/5/2010 2/5/2010 2/3/2010 2/3/2010 2/3/2010 2/3/2010 2/3/2010 2/3/2010 2/2/2010 2/2/2010 1/29/2010 1/29/2010 1/29/2010 1/29/2010 1/29/2010 1/29/2010 1/29/2010 1/28/2010 1/28/2010 1/28/2010 1/27/2010 1/27/2010 1/27/2010 1/27/2010 1/26/2010 1/26/2010 1/25/2010 1/23/2010 1/22/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/21/2010 1/20/2010 1/20/2010 1/19/2010 1/15/2010 1/13/2010 1/13/2010 1/13/2010 1/12/2010 1/12/2010 1/11/2010 1/11/2010 1/11/2010 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-002038 PSF22-000087 PSF22-000188 PSF22-000157 PSF22-000101 PSF22-000104 PSF22-000093 PSF22-000113 PSBO-000637 PSBO-002027 PSBO-002031 PSBO-002033 PSBO-002036 PSBO-002032 PSBO-002028 PSBO-000819 PSBO-001755 PSBO-001678 PSBO-002022 PSBO-000700 PSBO-002015 PSBO-002018 PSBO-002019 PSF22-000081 PSF22-000266 PSF22-000057 PSF22-000069 PSF22-000239 PSF22-000259 PSF22-000067 PSF22-000070 PSF22-000095 PSF22-000129 PSF22-000071 PSF22-000005 PSF22-000037 PSF22-000044 PSF22-000048 PSF22-000043 PSF22-000032 PSF22-000011 PSF22-000018 PSF22-000013 PSBO-002014 PSF22-000272 PSF22-000163 PSF22-000162 PSF22-000156 PSF22-000210 PSF22-000253 PSF22-000194 PSF22-000211 PSF22-000203 PSF22-000244 PSF35-000086 Rev. A D B C C I E B C A A A A A A B B B A B A A A B B B C B C E D B E C B B I C F C C B C A B C B B B B C B B B B Title QTM 71-3111B, CASTABLE SILICONE RUBBER MATERIAL SPEC 5PTMRT09-QPL-3 FOR NON-CHROM LOW DENSITY WATERBORNE EPOXY 5PTC1090 REV A- BUSHING, FLANGED, INTERFERENCE FIT, NON-REAM 5PTC1210 REV C LABEL, UNIQUE ID, DATA MATRIX 5PTPKL09-QPL-5 ASSEMBLY AND ACCEPTANCE OF F-22LEADING AND TR 5PTPLL11-QPL-8 FOR 5PTPLL FABRICATION OF BISMALEIMIDE COMP 5PTPLL10-QPL-7 QPL FOR 5PTPLL10 MACH PROCEDURES FOR COMPOSTI 5PTPLT13-QPL-5 FOR 5PTPLT13 APP AND CONTROL OF BISMALEIMIDE BMS7-360H, TITANIUM 5AI-5V-5MO-3CR DIE FORGING AND BARS BAC5619 PSD6-51, HEAT TREATMENT OF CORROSION RESISTANT STEEL BAC5009 PSD9-62, BOLT AND NUT INSTALLATION BAC5613 PSD9-30, HEAT TREAT OF TITANIUM ANDTITANIUM ALLOYS BSS7600 PSD6-12, PERSONNEL CERT,GENERAL REQUIREMENTS BAC5408 PSD9-10, VAPOR DEGREASING BAC5613 PSD6-48, HEAT TREATMENT OF TITANIUM AND TITANIUM ALL DPS4.50-62 REV AN R-1, IMPACT RESISTANT COATING SYSTEM DPS1.07-39 REV AD CEMENTING LAMINATED PLASTICS DPS1.05-5 REV AE HARDNESS VALUES FOR STAINLESS STEEL,COPPER BAC5300-1 PSD6-1, SURFACE AND EDGE INTEGRITY OF METAL BAC5669 REV A VIBRATORY PEENING 5M3012 REV C, FLOODLIGHT, ELECTRICAL-FRONT PANEL, NIGHT VISI 9M1066 REV B, CASE, SHIPPING AND STORAGE, POLYETHYLENE 30M-NAS1769 REV B, SUP FOR NAS1769 5PTMLL11-QPL-2 ADHESIVE, EPOXY PASTE, TWO PART 5PTPTT09-QPL-1 QUALIFIED PROD LIST FOR COMPOSITE MATERIAL 5PTPKL03-QPL-3 PRO SPEC QUALIFIED PRODUCERS LIST FOR 5PTPK 5PTPLT12-QPL-4 QUALIFIED PRODUCERS LIST FOR 5PTPLT12 5PTPGL05-D-A04 SURFACE PREP OF PARTS FOR ADHESIVE BONDI 5PTPKA01-B-A02 , APPLICATION PROCESS FOR BONDING OF 5PTPTL11-R, APPLICATION OF CONDUCTIVE PAINT 5PTPLT13-C-V03 QUALIFICATION, APPROVAL AND CONTROL OF BISMAL 5PTPET01-B-V13 FUSION WELDING FOR AEROSPACE APPLICATIONS 5PTPBT04-J-A01 FASTENER INSTALLATION, SOLID RIVET, BLIND RIV 5PTPNG01B AMD 5. MARKING SPEC FOR F-22 AIRCRAFT AND SUPPORT 5PTMAT01-QPL-2,TAPE, CARB FIBER, BISMALEIMIDE RESIN IMPREGNA 5PTPCG01- B-A01, REQUIR FOR ULTRASONIC INSPECTION PROCEDURE 5PTPJL12-S PROCESS SPEC APPLICATION OF PRIMER COATINGS 5PTPJL17-F PROCESS SPEC FINISHING OF GRAPHITE REINFORCED PLA 5PTPHL15-E PROCESS SPEC CHEMICAL PROTECTIVE FILM FOR TITANIU 5PTMLT06-QPL-3 MATERIAL SPEC QUALIFIED PRODUCT LIST FOR 5PTMBT06-QPL-3 MATERIAL SPEC PREPREG, WOVEN FABRIC, BISMALEI 5PTMCT02-QPL-2 MATERIAL SPEC QUALIFIED PRODUCT LIST FOR 5PTMBT12-QPL-4 MATERIAL SPEC QUALIFIED PRODUCTION LIST FOR PS17164 REV C, INSTALL OF PERM FLARE DME SLEEVE FIT CONNECT 5PTMRL43-D-A02, CANOPY REPAIR FILM 5PTMKL16-F EXTRUDED MATERIALS 5PTMEL03-M-A02, RUBBER SHEET, MOLDED AND EXTRUDED 5PD01341A, UII CONSTRUCTION GUIDELINES FOR THE F22 PROG 5PD00040 REV F, F22 AIR VEHICLE INTERCHAN AIR VEHICLE REPORT LMA-MB019D, PREPREG-E-GLASS FABR & LOW TEMP CURE EPOXY RESI 5PTPRT08-F ELEC WIRE AND WIRE HARNESS ID 5PD01314-A, F-22 5HW01702 HORIZONTAL STABILATOR DELIVERABLE LMA-D0010C COMPOSITE PARTS SUPPLIER AUDIT,SURVEILLANCE AND 5PTPLL13-QPL-5 QUALIFIEDPRODUCERS LIST FOR 5PTPLL13 LMA-PC301-B, RADIOGRAPHIC INSPECTION, GEN REQ FOR Issued Date 1/11/2010 1/8/2010 1/8/2010 1/8/2010 1/8/2010 1/8/2010 1/8/2010 1/8/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/7/2010 1/6/2010 1/5/2010 12/23/2009 12/23/2009 12/23/2009 12/22/2009 12/22/2009 12/21/2009 12/21/2009 12/21/2009 12/21/2009 12/18/2009 12/18/2009 12/18/2009 12/18/2009 12/18/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/17/2009 12/16/2009 12/16/2009 12/16/2009 12/16/2009 12/15/2009 12/15/2009 12/15/2009 12/14/2009 12/14/2009 12/14/2009 12/14/2009 12/14/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000071 PSF22-000270 PSBO-001954 PSBO-001956 PSBO-001955 PSBO-001959 PSBO-001961 PSBO-001963 PSBO-001966 PSBO-001969 PSBO-001996 PSBO-001995 PSBO-001994 PSBO-001993 PSBO-001992 PSBO-001991 PSBO-001990 PSBO-001989 PSBO-001988 PSBO-002013 PSBO-002012 PSBO-002011 PSBO-002010 PSBO-002009 PSBO-002007 PSBO-002006 PSBO-002004 PSBO-002003 PSBO-002001 PSBO-002000 PSBO-001999 PSBO-001997 PSBO-001987 PSBO-001986 PSBO-001985 PSBO-001984 PSBO-001983 PSBO-001980 PSBO-001979 PSBO-001978 PSBO-001977 PSBO-001976 PSBO-001975 PSBO-001974 PSBO-001973 PSBO-001972 PSBO-001971 PSBO-001970 PSBO-001967 PSBO-001965 PSBO-001962 PSBO-001960 PSBO-001933 PSBO-001936 PSBO-001939 Rev. B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title LMA-PA003-F, PROCESSING OF METAL TUBING 5PTC4216 REV R SHIM, SOLID SRP 1004 (J) - COMPOSITE SHIM REPAIR STOCK SRP 1100 (K) - BLEND AND TRIM - SH METAL EXT AND CHEM-MILLED SRP 1101 (J) - BLENDING AND TRIMMING - MACHINED PARTS SRP 1105 (F) - BOND FIT ACRYL BUSH REP FOR ELONG AND MISLOCA SRP 1108 (J) - HEAT TREATMENT OF ALUMINUM ALLOYS SRP 1110 (G) - METAL MATER AND PARTS WARPAGE BENT BOW COND S SRP 1115 (F) - WELD REJECTIONS - STAINLESS STEEL SRP 1406 (J) - NONCONFORM IN ALU HONEYCOMB CORE SRP 2820 (G) - NONCONFORMING RAMP LATCH TORQUE TUBE HOLES CA SRP 2818 (C) - HOLE SHORT EDGE DIST TO CHEM MACH LANDS BET F SRP 2813 (E) - AFT FUSELAGE FRAME - LONGERON CLIP REPAIR REP SRP 2812 (G) - MOLDLINE SURFACE QUALITY SRP 2811 (F) - DAMAGED STIFFENING FLANGES FOR CUTOUTS SRP 2810 (E) - JOGGLES-DAMAGED INCORRECT SRP 2809 (E) - FLANGE DAMAGE TAB SRP 2808 (G) - DAMAGED HOLES SHORT EDGE DISTANCE IN FLANGES SRP 2807 (E) - FLANGE DAMAGE CRACK IN RADIUS SRP 6851 (D) - MISLOCATED GUIDE PIN HOLE REPAIR SRP 6400 (F) - DENT REPAI FOR FORW AND LOW AFT BOX OF VERT T SRP 5812 (G) - MOLD LINE QUALITY SRP 5802 (F) - PLUGGING HOLES IN SHEET METAL AND COMPOSITE SRP 5801 (F) - SHIM INSTALLATION SRP 5401 (D) - DELAM NONCONFORMANCES IN COMPOSITE LAMINATES SRP 4808 (G) - BUSHING REPAIR FOR REMOVABLE COMPOSITE COVERS SRP 4802 (J) - MISLOCA FAST HOLES IN SH METAL ASSEMB SRP 4801 (G) - SHIMMING GAPS SRP 3812 (G) - MOLDLINE SURFACE QUALITY SRP 3802 (D) - MISLOCATED FASTENER HOLES IN SHEET METAL SRP 3801 (H) - SHIMMING GAPS WITH METAL SHIM SRP 2851 (E) - INSULATION BLANKETS AND COVERING MATERIALS SRP 2805 (D) - FLANGE DAMAGE SHEET METAL SRP 2804 (F) - SHEET METAL DAMAGE - SKINS AND WEBS SRP 2803 (F) - MISLOCATED FASTENER HOLES IN CARBONEPOXY ASSE SRP 2802 (F) - MISLOC FAST HOLES IN SH MET MACHINE PART EXT SRP 2801 (H) - SHIM INSTALLATION SRP 2001 (A) - SHIMS SPECIAL LAMINATED SRP 1809 (C) - MISCELLANEOUS FASTENER NONCONFORMANCES SRP 1807 (F) - REPAIR OF 6M62 CUTOUTS SRP 1806 (F) - OPTICAL SURFACE RESTORATION SRP 1805 (L) - INTERFERENCE CONDITIONS - MACHINED PARTS SRP 1804 (F) - MISLOCATED SEAL GROOVE HOLE SRP 1803 (H) - REPLACEMENT OF SYSTEM BRACKETS AND CLIPS SRP 1802 (L) - INTERFERENCE COND - SH METAL PARTS AND EXT SRP 1801 (K) - CAN CONDITIONS IN SKINS AND WEBS SRP 1800 (J) - MISCELLANEOUS FASTENER NONCONFORMANCES SRP 1410 (G) - DAMAGED SILICONE RUBBER CUFFS BELLOWS SRP 1117 (L) - OVERSIZE BLUEPRINTSTANDARD BUSHING INSTALLATI SRP 1112 (G) - THREADED HOLE REPAIR INSERT INSTALLATION SRP 1109 (J) - WELD REJECTIONS - ALUMINUM SRP 1107 (K) - WELD REJECTIONS - TITANIUM BAC5749 PSD 6-153, ALKALINE CLEANING BAC5408 PSD6-62, VAPOR DEGREASING BAC5756 REV K, APP OF HEAT TREAT PROTECTIVE COATINGS Issued Date 12/14/2009 12/14/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/11/2009 12/10/2009 12/10/2009 12/10/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001944 GPS-TEST-0008 PSBO-001947 PSBO-001949 PSBO-001948 PSBO-001945 PSBO-001943 PSBO-001942 PSBO-001941 PSBO-000436 PSBO-000437 PSBO-001804 PSBO-001931 PSBO-001932 PSBO-001929 PSBO-001928 PSBO-001916 PSBO-001918 PSBO-001921 PSBO-001923 PSBO-001919 PSBO-001917 PSBO-001909 PSBO-001905 PSBO-001907 PSBO-001908 PSBO-001898 PSBO-001902 PSBO-001903 PSBO-001854 PSBO-001855 PSBO-001857 PSBO-001861 PSBO-001863 PSBO-001892 PSBO-001891 PSBO-001890 PSBO-001889 PSBO-001888 PSBO-001887 PSBO-001886 PSBO-001885 PSBO-001884 PSF22-000309 PSF22-000308 PSF22-000307 PSF22-000306 PSF22-000305 PSF22-000304 PSBO-001896 PSBO-001895 PSBO-001894 PSF22-000326 PSF22-000325 PSF22-000324 Rev. A A A A A A A A A B B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title SRP 8812 (B) - MOLDLINE QUALITY CALIBRATION REQUIREMENTS FOR MEASUREMENT & TEST EQUIP SRP 8813 (A) - UNBOND DELAM NONCOMFORM IN COMP LAMINATES T E SRP 8820 (E) - LOST PART SERIAL OF FRAC CRIT (FC) AND MAINT SRP 8807 (F) - DAMAGED DISPLACED NUT ELE WING SKIN REPAIR FA SRP 8814, CANOPY TRANSPARENCY FLOWCOAT REPAIR SRP 8809 (B) - SHIMS SPECIAL - CRUCIFORM SPLICE Y326 500 SRP 8808 (E) - SHIMS SPECIAL SRP 8805 (E) - FLANGE DAMAGE, SHEET METAL PS20705 REV E - FUEL SYSTEM; INERTING OF, F/A-18 SERIES PS20713 REV E - FUEL SYSTEM; INERTING OF, F-15 SERIES ST7M169 REV J, FERRULE - TUBE, FLEXIBLE FLUID COUPLING 30M-NAS1725 REV A, SUP FOR NAS1725, BOEING ST. LOUIS 30M-NAS1729 REV A, SUP FOR NAS 1729, BOEING ST. LOUIS 7M499 REV D, ADAPTER-STRAIGHT, FLANGE TO TUBE, SPECIAL ST7M344 REV A, PLUG-STOWAGE, FOR CRU-60P HOSE ASSEMB DMS 2182 REV B ARAMID FABRIC MATERIAL, HIGH STRENGTH DMS 1926 REV P, EPOXY RESIN, B STAGE CLOTH REIN DPS11.08 REV P, PHOSPHORIC ACID ANODIZING OF ALUMINUM DMS 2438 REV A R-2, FIBER REINFORCED BISMALEIMIDE PREPREG DMS 1583 REV H, ANNELAED FORGINGS, TITANIUM ALLOY, 6AL 4V.PD DMS 1968 REV E, TAPE, COATED CLOTH, PRESSURE SENSITIVE PS14304 REV B, PREPARATION OF DMS 2278 FOAM CORE PS14070 REV R, STORAGE, SIZE SELECTION AND APPLICATION OF ST7M405 REV J, FERRULE-TUBE, FLEXIBLE FLUID COUPLING 7M1039 REV B, SEAL, BOSS - FLUID FITTING, METALLIC PS14034.4 REV E LAMINATES, GLASS REINFORCED PHENOLIC, FABRI 1MA10716 ALUMINUM ALLOY SPECIAL SHAPED SEC-EXTRUDED 3M892 REV C, BOLT, HEX HEAD, CLOSE TOLERANCE, SHORT THREAD, 3M1024 REV C SCREW, CLOSE TOLERANCE - ASSEMBLY, 100 DEG COUN 3M1025 REV C, SCREW, CLOSE TOLERANCE - ASSEMBLY, 100 DEG, C 3M1043 REV F, BOLT-CLOSE TOLERANCE, SPLINE, FLANGE HEAD, SEA 3M1216 REV C, SCREW-CLOSE TOLERANCE, 100 DEG HEAD, OFFSET CR 3M1262 REV K, BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESSST9M402 REV A, CASTER-BALL, CORROSION RESISTANT STEEL ST7M191 REV M, COUPLING ASSEMBLY- HALF, FLEXIBLE FLUID LINE ST3M865 REV K, BOLT, MINIMUM HEAD, HEX RECESS, CRES, 125 KSI ST3M838 REV G, BOLT, SPLINE DRIVE, CRES ST3M837 REV G, BOLT, SPLINE DRIVE, CRES (125 KSI FSU) ST3M733 REV R, BOLT-100DEG COUNTERSUNK, DOVETAIL SLOT, CRES ST3M729 REV F BOLT, CLOSE TOLERANCE-DOUBLE HEX HEAD, CRES, ST3M714 REV J, SCREW-CLOSE TOLERANCE, 100DEG C'SUNK DOVETAIL ST3M713 REV E SCREW, MACHINE-100DEG C'SUNK, DOVETAIL SLOT, 5PTPAG52 REV E, FORMING OF TITANIUM, ENGINEERING AND 5PTPAG51 AMD 1, CHEMICAL MILLING OF METALS, ENGINEERING AND 5PTPAG45, CASTINGS, AEROSPACE SUPPORT EQUIPMENT, ENGINEERING 5PTPAG35, SHEET AND EXTRUDED METAL FORMING TOLERANCES 5PTPAG32 REV A, SHOT PEENING OF METAL PARTS, ENGINEERING AND 5PTPAG23-A AMD 1, PROCESS OF METAL TUBING 3M1323 REV A, BOLT 100DEG TENSION HEAD, GEAR DRIVE RECESS 3M956 REV D, SCREW, MACHINE-100DEG CSUNK, DOVETAIL SLOT 3M707 REV J, SCREW, MACHINE-100DEG CSUNK, HI-TORQUE, REDUCED 5PTPAL22, PROCESSING OF AUSTENITIC STAINLESS STEELS 5PTPAL21, HOT FORMING OF ALUMINUM ALLOY SHEET 5PTPAL18-A, HEATING OF BEARING HOUSING Issued Date 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/10/2009 12/9/2009 12/9/2009 12/9/2009 12/9/2009 12/9/2009 12/9/2009 12/9/2009 12/7/2009 12/7/2009 12/7/2009 12/7/2009 12/7/2009 12/7/2009 12/3/2009 12/2/2009 12/2/2009 12/2/2009 12/1/2009 12/1/2009 12/1/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000323 PSF22-000322 PSF22-000321 PSF22-000320 PSF22-000319 PSF22-000318 PSF22-000344 PSF22-000343 PSF22-000342 PSF22-000341 PSF22-000340 PSF22-000339 PSF22-000338 PSF22-000337 PSF22-000336 PSF22-000364 PSF22-000363 PSF22-000360 PSF22-000359 PSF22-000358 PSF22-000357 PSF22-000356 PSF22-000355 PSF22-000354 PSF22-000384 PSF22-000383 PSF22-000381 PSF22-000378 PSF22-000377 PSF22-000376 PSF22-000375 PSF22-000374 PSF22-000373 PSF22-000372 PSF22-000371 PSF22-000370 PSF22-000369 PSF22-000368 PSF22-000367 PSF22-000365 PSF22-000352 PSF22-000351 PSF22-000350 PSF22-000349 PSF22-000348 PSF22-000347 PSF22-000346 PSF22-000345 PSF22-000335 PSF22-000333 PSF22-000332 PSF22-000331 PSF22-000330 PSF22-000329 PSF22-000328 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 5PTPAL16-A, CARBON AND ALLOY STEELS, HEAT TREATMENT AND 5PTPAL14-C, PROCESSING OF PRECIPITATION HARDENING STAINLESS 5PTPAL13-A, PROCESSING OF ALLOY STEELS BEFORE AND AFTER HEAT 5PTPAL12-A, HOLE PREPARATION IN LOW ALLOY HIGH STRENGTH STEE 5PTPAL08-A, SHOT PEENING OF METAL PARTS 5PTPAL07, TUMBLE AND VIBRATORY DEBURRING OF AIRCRAFT PARTS 5PTPBT10-A-V04, COUPLING INSTALLATION, BULKHEAD 5PTPBT09-E-A01, PERMANENT TUBE JOINT INSTALLATION, EXTERNAL 5PTPBT07-C-A01, LOCKBOLTS, INSTALLATION OF 5PTPBL17, SLEEVE, OVERSIZE, INSTALLATION OF 5PTPBL13-C, INSTALLATION OF PLUMBING LINES, F22 AIRCRAFT 5PTPBL12-A, FABRICATION AND ASSEMBLY OF CEQ WINDOWS 5PTPBL11-C, INSTALLATION OF INTERFERENCE FIT BUSHINGS 5PTPBL09-A, FABRICATION AND INSTALLATION OF CABLE AND 5PTPBG76, FUEL TANK GROOVE INJECTION INSERT INSTALLATION 5PTPCG09A AMD 1, HARDNESS AND CONDUCTIVITY TESTING, NON5PTPCG08B, REQUIREMENTS FOR ULTRASONIC INSPECTION 5PTPCG02, REQUIREMENTS FOR EDDY CURRENT INSPECTION PROCEDURE 5PTPCB13 REV C, TEMPER INSPECTION OF ALUMINUM ALLOYS 5PTPBT41-A, RUE PINS, INSTALLATION OF 5PTPBT40, INSTALLATION OF FASTENER PROTRUDING HEAD PIN WITH 5PTPBT38A, THERMAL DETECTOR UNIT HANDLING AND INSTALLATION 5PTPBT30-A-V01, INSULATION INSTALLATION, AIR DUCTS, POLYFOAM 5PTPBT29-B, INSTALLATION OF EXPANDED BUSHINGS, METALLIC STRU 5PTPDL10-A, HEAT TREATMENT AND PROCESSING OF NICKEL AND 5PTPDL09-A, HEAT TREATMENT OF AUSTENITIC STAINLESS STEELS 5PTPDL07-A, HEAT TREATMENT OF ALLOY STEELS TO 220 KSI, 5PTPDL01-D, STRESS RELIEVING, BAKING, AND COLD TREATMENT OF 5PTPDG02A, INSTALLATION PROCEDURES FOR FIREWALL MATERIALS 5PTPCT19-V01, AMMONIUM BIFLUORIDE ETCH INSPECTION OF 5PTPCT18, CORRELATION PROCEDURE FOR ULTRASONIC SYSTEMS 5PTPCT13-B, INSPECTION, ULTRASONIC, OF TITANIUM ALLOY CASTIN 5PTPCT12-A, INSPECTION, EDDY CURRENT OF FRACTURE/DURABILITY 5PTPCT06-A, INSPECTION, DEMONSTRATION REQUIREMENTS FOR NON 5PTPCL16-A01, INSPECTION, SHEAROGRAPHY, PROCEDURES FOR 5PTPCL15, INSPECTION REQUIREMENTS FOR THE VALIDATION OF 5PTPCL10-F, INSPECTION, PROCEDURE FOR COMPOSITE PIVOT SHAFT 5PTPCL09-E, INSPECTION, ACCEPTANCE CRITERIA FOR HORIZONTAL 5PTPCL03-B, ETCH INSPECTION OF MACHINED OR GROUND HIGH 5PTPCG10, NITAL ETCH INSPECTION OF STEEL PARTS 5PTPBT27-A, INSERT INSTALLATION, SCREW THREAD, M45932/1 AND 5PTPBT26-B-A01, FASTENER INSTALLATION 100 FLUSH HEAD PIN W/ 5PTPBT23-A, INSTALLATION OF BEARINGS, ROLLER SWAGED AND 5PTPBT20-C-V03, STUCTURAL PANEL FASTENERS, INSTALLATION OF 5PTPBT14-C-V01, BONDING OF STUDS, BRACKETS AND FLIGHT TEST 5PTPBT13-D, COUPLING INSTALLATION, FLEXIBLE 5PTPBT12-B-V02, RIVETLESS NUTPLATES, COLD EXPANDED INTO 5PTPBT11-B-V01, CAPTIVE SCREWS, INSTALLATION OF 5PTPBG30A AMD 2, INSTALLATION OF POLYURETHANE AIR DUCT 5PTPBG06A, INSTALLATION PROCEDURE FOR SWAGED GROMMETS 5PTPBG05-B, PS FOR INSTALLATION OF HIGH TEMP, POLYIMIDE/FIBE 5PTPBG03-B, PS FOR INSTALLATION OF HIGH TEMP INSULATION 5PTPBG02C, INSTALLATION OF TUBES AND HOSES 5PTPBG01, WIRE ROPE, SLEEVE SWAGING, EYE AND LAP SPLICE 5PTPAT05-B, ABRASIVE WATERJET PATTERN CUTTING OF TITANIUM Issued Date 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000327 PSF22-000317 PSF22-000316 PSF22-000315 PSF22-000314 PSF22-000313 PSF22-000312 PSF22-000311 PSF22-000310 PSBO-001883 PSBO-001882 PSBO-001881 PSBO-001879 PSBO-001878 PSBO-001877 PSBO-001876 PSBO-001875 PSBO-001871 PSBO-001870 PSBO-001869 PSBO-001868 PSBO-001867 PSBO-001866 PSBO-001865 PSBO-001864 PSBO-001862 PSBO-001860 PSBO-001856 PSBO-001841 PSBO-001846 PSBO-001848 PSBO-001851 PSBO-001853 PSNG-000024 PSBO-001852 PSBO-001849 PSBO-001847 PSBO-001845 PSBO-001842 PSBO-001844 PSBO-001843 PSF22-000215 PSBO-000665 PSBO-001145 PSBO-001840 GPS-FABR-0005 PSBO-001839 PSBO-001831 PSBO-001832 PSBO-001835 PSBO-001834 PSBO-001833 PSBO-001830 PSBO-001807 PSBO-001828 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A A A A B B A A A A A A A A A B A Title 5PTPAT03-V02, SUPERPLASTIC FORMING OF TITANIUM 6 ALUMINUM5PTPAL06, CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYS 5PTPAL05, CHEMICAL MILLING OF LOW ALLOY STEELS, CORROSION 5PTPAL02-A, FORMING OF STRUCTURAL TUBING, REQUIREMENTS FOR 5PTPAL01-E-A03, FORMING AND FABRICATING PRACTICES FOR SHEET 5PTPAG90 REV B. CASTOMGS. AERPSPACE QUALITY, ENGINEERING AND 5PTPAG89, DRILLING/REAMING AND GRINDING OF HIGH STRENGTH 5PTPAG83, GLASS BEAD PEENING 5PTPAG54 REV A, FORMING OF FERROUS AND NICKEL ALLOYS, ST3M653 REV G, SCREW, CLOSE TOLERANCE-ASSEMBLY, 100DEG C'SUN ST3M652 REV K, SCREW, CLOSE TOLERANCE-ASSEMBLY, 100DEG C'SUN ST3M557 REV L, SCREW-CLOSE TOLERANCE, 100DEG COUNTERSUNK, RE ST3M506 REV N, SCREW-CLOSE TOLERANCE, 100DEG COUNTERSUNK, DO ST3M505 REV K SCREW-CLOSE TOLERANCE, 1--DEG DOVETAIL SLOT HE ST3M496 REV L, SCREW-CLOSE TOLERANCE, 100DEG DOVETAIL SLOT ST3M495 REV K, SCREW, CLOSE TOLERANCE-100 DEG COUNTERSUNK, ST3M455 REV AK, SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, 5M3188 BACKSHELL ELECTRICAL CONNECTOR, CABLE CLAMP, ADAPTER 3M1319 REV C, BOLT-SPECIAL PAN HEAD, GEAR DRIVE, INCONEL 718 3M1288 REV C SCREW, CAPTIVE, PHILLIPS RECESS 3M1282 REV E, BOLT- PAN HEAD, GEAR DRIVE, INCONEL 718, 125 K 3M1278 REV J BOLT, 100DEG REDUCED HEAD, GEAR DRIVE RECESS, 3M1277 REV H BOLT 100DEG REDUCED HEAD, GEAR DRIVE RECESS 3M1276 REV H, BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS, 3M1275 REV H, BOLT, 100 DEG TENSION HEAD, GEAR DRIVE RECESS, 3M1217 REV D, SCREW-CLOSE TOLERANCE, 100 DEG HEAD, OFFSET CR 3M1215 REV B, BOLT-CLOSE TOLERANCE, SPLINE DRIVE NON-MAGNETI 3M1034 REV H, SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, 3M898 REV E, BOLT, SHOULDER - SPLINE DRIVE, CRES 9125 KSI FS 3M932 REV H, BOLT - SHOULDER, HEX HEAD, CRES, 125 KSI FSU 3M939 REV J, SCREW, CLOSE TO TOLERANCE - 100 DEG 3M957 REV E, SCREW, MACHINE- 100 DEG CSUNK, HI- TORQUE 3M959 REV F, SCREW - CLOSE TOLERANCE, 100 DEG COUNTERSUNK PS13204 REV AF CONVERSION COATING, BRUSH AND SPRAY 3M958 REV E, SCREW- CLOSE TOLERANCE, 100 DEG CSUNK 3M950 REV D, SCREW, CLOSE TOLERANCE - ASSEMBLY, 3M938 REV D, SCREW, MACHINE- 100 DEG 3M927 REV M, SCREW- CLOSE TOLERANCE 100 DEG COUNTERSUNK 3M902 REV F, SCREW, CLOSE TOLERANCE- ASSEMBLY, 100 DEG 3M926 REV P, SCREW - CLOSE TOLERANCE 3M925 REV J, SCREW, CLOSE TOLERANCE- ASSEMBLY, 5PTD0001 REV C F22 PRODUCT DRAWING ENGINEERING DATA INTERPRE 5M3122 REV C SOCKET, PLUG-IN ELECTRONIC COMPONENT, FOR 5 AM 3M917 REV F PIN-RIVET, THREADED- SHEAR, PROTRUDING HEAD BAC5744 REV G, MANUAL CLEANING (COLD ALKALINE, SOLVENT FOAM PROCESS IMPLEMENTING PROCEDURES FOR BOEING-ST.LOUIS REV A BAC5753 PSD 9-43, CLEANING, DESCALING AND SURFACE PREP. PS17001.2 REV J, FITTINGS; INSTALLATION INTO BOSSES ST7M212 REV E, ELBOW-REDUCER, BULKHEAD 90 DEGREE DYNAMIC DPS3.67-17 REV Y, INSTALLATION OF PULL STEM BLIND RIVETS DMS2240 REV K, MILDING, INJECTION, HIGH TEMPERATURE THERMOP DMS1570 REV C, MULTI-DMS AMENDMENT PS15800 REV F, GENERAL HEAT TREATING CRITERIA FOR TITANIUM 5M1980 REV J, SWITCH, PUSHBUTTON, ILLUMINATED/NON-ILLUMINAT 30M-MS27194, BOEING-ST. LOUIS SUPPLEMENT FOR Issued Date 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/19/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/18/2009 11/17/2009 11/13/2009 11/13/2009 11/9/2009 11/7/2009 11/6/2009 11/5/2009 11/5/2009 11/5/2009 11/5/2009 11/5/2009 11/4/2009 11/2/2009 11/2/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001827 PSBO-000811 PSBO-001371 PSBO-001811 PSBO-001813 PSBO-001815 PSBO-001817 PSMR-000015 PSBO-001825 PSBO-001824 PSBO-001823 PSBO-001821 PSBO-001820 PSBO-001819 PSBO-001818 PSBO-001816 PSBO-001814 PSBO-001812 PSBO-001361 PSF22-000303 PSMR-000002 PSMR-000010 PSMR-000012 PSMR-000014 PSMR-000013 PSMR-000011 PSMR-000008 PSF22-000031 PSBO-001785 PSBO-001789 PSBO-001791 PSBO-001793 PSBO-001805 PSBO-001803 PSBO-001802 PSBO-001799 PSBO-001797 PSBO-001796 PSBO-001795 PSBO-001794 PSBO-001792 PSBO-001790 PSBO-001788 PSBO-001787 PSBO-001776 PSBO-001778 PSBO-001780 PSBO-001783 PSBO-001782 PSBO-001779 PSBO-001768 PSBO-001770 PSBO-001771 PSBO-001775 PSBO-001769 Rev. A B B A A A A A A A A A A A A A A A B A B A A A A A A C A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 30M-AS27194, BOEING-ST.LOUIS SUPPLEMENT FOR DMS2459 REV D PLATE, ALUMINUM ALLOY, 7050-T7451, FATIGUE QUA DPS4.507 REV T ROLLED THREADS AND FILLETS - GENERAL 5M12 REV G, COVER PLATE - ELECTRICAL RECEPTACLE HOLE 30M-AS28778, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS29513 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS24593 BOEING-ST. LOUIS SUPPLEMENT FOR STP-75P102, REV A ST5M1285 REV W, E BACKSHELL - CONNECTOR, ELECTRICAL, EMI PB11-585 ADV PROCESS INFORMATION FOR PS21085 (REV. G) MMS358 REV E, LIQUID SHIM 30M-MS35769 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS29513 REV A, CAGE 96906, MDAE SUPPLEMENT FOR 30M-MS29512 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS28778 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS35769 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS29512 BOEING-ST. LOUIS SUPPLEMENT FOR 5M1707 REV K, CONNECTOR - RECEPTACLE FILTER, FEED THRU DPS3.27-1 REV U MARKING METHODS AND MATERIALS, INK STAMPING 5PTMLL07-QPL-1, QUALIFIED PRODUCT LIST FOR, ADHESIVES, EPOXY STM-P-L106, REV A STM-P-L106QPL NEW STM-P-L118, NEW STP-45P101, NEW STM-P-L118QPL NEW STM-P-L107QPL NEW STM-P-L100, 5PTMLT06-E MATERIAL SPEC BISMALEIMIDE RESIN AND TACKIFIER 3M989 REV G, BOLD - CLOSE TOLERANCE, HEX HEAD, SEALANT INJEC 5M3135 REV B, CONNECTOR - BLUG, FOUR LUG, ELECTRICAL, TRIAX 6M199 REV C, PLATE, IDENTIFICATION - NON TYPE DESIGNATED 30M-AS81935/3, BOEING-ST. LOUIS SUPPLEMENT FOR ST7M254 REV J, PACKING ASSEMBLY - PREFORMED TEE SECTION, OD ST5M1412 REV B, INSULATOR BUSHING, SIMICONDUCTOR DEVICE ST3M753 REV AB, BOLD - CLOSE TOLERANCE, SPLINE DRIVE, FLANGE PS21211.4 SUP 1, REV U, ULTRASONIC INSPECTION OF COMPOSITE 30M-NAS1217 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NA0049 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-M81935/3, BOEING-ST.LOUIS SUPPLEMENT FOR 30M-M25675, BOEING-ST. LOUIS SUPPLEMENT FOR 14M912 REV L, TUBING, PLASTIC, EXTRUDED, TORSIONALLY CUT 6M99 REV E, PLATE - IDENTIFICATION, CONTENTS DATA, DESIGN OF 5M1784 REV H, STRAIN UNIT - FATIGUE MONITORING 4M396 REV A, BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING ST3M747 REV AA, BOLT, CLOSE TOLERANCE, SPLINE DRIVE, CRES 7M1277 HOSE ASSEMBLY, FLANGED TO FLARED, REDUCER, PTFE 7M1279 HOSE ASSEMBLY, FLANGED TO FLANGED, PTFE, LOW PRESSURE 30M-NAS1523 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-M9395/41 BOEING-ST. LOUIS SUPPLEMENT FOR 7M1278 HOSE ASSEMBLY, FLANGED TO FLARED, PTFE, LOW PRESSURE 9M164 REV J, RECEPTACLE, TURNLOCK FASTENER, ANGLE MOUNTING PS12035 REV W DEV 1 \A\ RAMTA DIV, CLEAN OF ALUM DETAIL PART PS14031 REV H DEV 1, REPAIR OF GLASWS FABRIC AND KEVLAR 49 PS14031 REV H, REPAIR OF GLASS FABRIC AND KEVLAR 49 FABRIC 9M1072, LUG ASSEMBLY - 3/4 BAND CLAMP Issued Date 11/2/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/22/2009 10/21/2009 10/21/2009 10/21/2009 10/21/2009 10/21/2009 10/21/2009 10/21/2009 10/21/2009 10/9/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 10/7/2009 9/24/2009 9/24/2009 9/24/2009 9/24/2009 9/24/2009 9/24/2009 9/9/2009 9/9/2009 9/9/2009 9/9/2009 9/9/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001759 PSBO-001765 PSBO-001766 PSBO-001764 PSBO-001761 PSBO-001762 PSBO-001763 PSBO-001760 PSBO-001758 PSBO-001757 PSBO-001752 PSBO-001753 PSBO-001751 PSBO-000100 PSBO-001702 PSBO-001169 PSBO-000109 PSF22-000299 PSF22-000298 PSF22-000135 PSF22-000060 PSF22-000002 PSBO-001748 PSBO-001747 PSBO-001744 PSBO-001743 PSBO-001731 PSBO-001730 PSBO-001728 PSBO-001727 PSBO-001682 PSF22-000212 PSF22-000297 PSBO-001720 PSBO-001723 PSBO-001724 PSBO-001722 PSBO-001721 PSF22-000296 PSF22-000294 PSBOM-000006 PSF22-000061 PSF22-000115 PSF22-000088 PSF22-000062 PSF22-000056 PSF22-000138 PSF22-000223 PSF22-000220 PSF22-000219 PSF22-000218 PSF22-000202 PSF22-000180 PSF22-000175 PSF22-000170 Rev. A A A A A A A A A A A A A B B B B A A D D C A A A A A A A A B B A A A A A A A A B C C C D B B B B B B B B B C Title 30M-MS21025 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM21025 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM35649 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1794, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1791 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1792 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1793, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS35649 BOEING-ST. LOUIS SUPPLEMENT FOR MMS582 REV D INSULATION BLANKET, MEDIUM AND HIGH TEMPERATUR BAC5317 REV F FIBER REINFORCED COMPOSITE PARTS DMS 1880 REV D ADHESIVE, AIR DRYING, TWO-PART, SILICONE RUBB DMS 2013 REV H SEALANT, FAYING SURFACE, WITH EXTENDED APPLIC PS14111 REV M DEV 1 MACHINING AND DRILLING COMPOSITES PS14239 REV H - CARBON/EPOXY AND CARBON/BISMALEIMIDE, COMPRE ST5M1445 REV C, SWITCH - ROTARY, 2 POLE, 8 POSITION, LOW CUR PS11346 REV V, SEALING OF TRANSPARENCIES (F-4,F-15,F-18,AV-8 PS14302 REV J - ADHESIVE BONDING OF COMPOSITE STRUCTURE (DOU 5PTV4212 REV B, FITTING, EA3063 5PTMRA01 NONCHROMATED CORROSION INHIBITING SOLVENTBORNE PRIM 5PTMRT09-C-A01 NON-CHROMATED LOW DENSITY WATERBORNE 5PTPLG10-H DRILLING AND MACHINING OF COMPOSITE AND COMPOSI 5PD00753H INTERCHANGEABILITY AND REPLACEABILITY REQUIREMENTS ST4M147 REV W, CONTACT STRIP, ELECTRICAL BONDING - CORNER ST3M436 REV M, NUT - SELF-LOCKING, DOUBLE HEX, CRES, DRY FIL K6M3 REV B, FITTING END - 60 DEGREE INTERNAL CONE, MALE, 30M-AS28915 BOEING-ST.LOUIS SUPPLEMENT FOR 30M-AS28914 BOEING-ST. LOUIS SUPPLEMENT FOR 9M963 REV B, SPRING, CANTED-COIL 3M1186 REV C BOLT-SELF RETAINING, IMPEDANCE TYPE, 450 DEGREE 3M1165 REV K SCREW-CLOSE TOLERANCE, 100 DEGREE COUNTERSUNK 3M1074 REV C GROMMET-FASTENTER, RING RETAINING 5PTC1016 REV L PLATE, IDENTIFICATION, FRACTURE CRITICAL 5PTPLT11-A-V04 FASTENER HOLES IN COMP AND METAL STRUCTURE, P BAC5730-2 PSD 6-2 TECHNICAL CLARIFICATION BAC5730-2 PSD 6-6 CLARIFY ENGINEERING REQUIRMENTS BAC5730-2 REV C SHOT PEENING-SELF CONTAINED BAC5730-2 PSD 6-5 CLARIFICATION BAC5730-2 PSD 6-4 CLARIFICATION AND CONSISTENT WITH BAC5730 5PTPKL15-G-A02 FABRICATION AND ACCEPTANCE OF HIGH TEMP SEC 5PTPFG05A AMD 2, PS FOR THE BLOCKING OF GAP IN F22 HP18-10 REV E THERMAL MECH PROCESSING OF 4340 STEEL ALLOY 5PTPLL06-C APPLICATION OF SOLID AND LIQUID SHIM MATERIAL 5PTPBT36-V11 TORQUE REQ FOR INSTALLATION OF FASTENERS 5PTPAL09-J STANDARD MACINING PRACTICES, TOLERANCES, AND 5PTPLL10-B-V02 MACHINING PROCEDURES FOR COMPOSITE AND/OR COM 5PTPKL03-D-A07 PROCESS SPEC COCURE OF BMI SANDWICH STRUCTURE 5PTMLL03-C-A01 ADHESIVE- HONEYCOMB CORE SPLICING 5PTMDL17-E CORE, HONEYCOMB, KOREX 5PTM7T03-B-A01 TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE 5PTM7T01-B-A01 TITANIUM ALLOY PLATE, DAMAGE TOLERANT GRADE 5PTM5T04-B TITANIUM ALLOY FORGINGS, DAMAGE TOLERANT GRAD 5PTM3T01-G TITANIUM ALLOY CASTINGS TI 6AL-4V VACUUM MELT 5PTPJL08-F APPLICATION OF RAIN EROSION COATINGS 5PTPRT01-C-A04 BONDING ELECTRICAL 5PTMUL05-S-A01 GAP FILLER Issued Date 9/2/2009 9/2/2009 9/2/2009 9/2/2009 9/2/2009 9/2/2009 9/2/2009 9/2/2009 8/27/2009 8/26/2009 8/24/2009 8/24/2009 8/20/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/19/2009 8/17/2009 8/17/2009 8/13/2009 8/13/2009 8/13/2009 8/13/2009 8/13/2009 8/12/2009 8/10/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 8/7/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000161 PSPW-000013 PSPW-000009 PSF22-000225 PSF22-000009 PSBO-000008 PSBO-001714 PSBO-001717 PSBO-001716 PSBO-001712 PSBO-001713 PSBO-000385 PSBO-001711 PSBO-000863 PSBO-000672 PSBO-000673 PSBO-001078 PSBO-000787 PSBO-000786 PSBO-001146 PSBO-001400 PSBO-001709 PSBO-001147 PSBO-000181 PSBO-000361 PSBO-001706 PSBO-001707 PSBO-001703 PSBO-001704 PSBO-000150 PSBO-000151 PSBO-000153 PSBO-000155 PSBO-000157 PSBO-001159 PSBO-001157 PSBO-000165 PSBO-000163 PSBO-000162 PSBO-000161 PSBO-000160 PSBO-000159 PSBO-000158 PSBO-001701 PSBO-001700 PSBO-001699 PSBO-001698 PSBO-001697 PSBO-001695 PSBO-001164 PSBO-001163 PSBO-001160 PSBO-000156 PSBO-000154 PSBO-000152 Rev. B B B B C E A A A A A D A C B B C B B B B A B C C A A A A C C C C C B B C C C C C C C A A A A A A B B B C C C Title 5PTM5T01-A-A03 TITANIUM ALLOY FORGINGS PWA36445 REV E COMPOSITE PLATFORMS, CARBON FIBER REINFORCED PWA310 REV BE ID MARKING 5PTMFT01-A-A02 PRESSURE SENSITIVE ADHESIVE POLYESTER FILM ID 5PTMBT05-E MATERIAL SPEC PREPREG, E-GLASS FABRIC,WOVEN BISMA PS11008 REV N - BONDING WITH ELASTOMERIC RTV ADHESIVES 5M3167 REV A, CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 PS21101 REV H, CABLES ASSEMBLIES, AIRCRAFT, TESTING OF PS13144 DEV 1, COTEC CORP, PLATE, LOW EMBRIT CAD, ELECTRO PS21238 ADHESIVE PRIMER COLORSTANDARDS, FABRICATION AND ACCE 5M2920 REV L, CONNECTOR ACCESSORY, BACKSHELL RIGHT ANGLE MMS519 ADDENDUM 1 REV F - APPROVED MMS 519 MATERIAL SOURCES DPS4.710-1 REV K, EDGE CONDITION REQUIREMENTS ST5M1326 REV M RELAY-ARMATURE, HERMETICALLY SEALED DPDT 30M-A-A-55487 REV A A-A-55487, BOEING- ST. LOUIS SUPPLEMENT 30M-A-A-55488 REV A, A-A-55488, BOEING - STLOUIS SUPPLEMENT 7M640 REV D, VALVE ELEMENT - SWING CHECK, FUEL 7M1266 REV A, COUPLING HALF, QUICK DISCONNECT, SELF SEALING 5M3163 REV A, CABLE, RADIO FREQ, FLEXIBLE, TWINAXIAL, 100 OH 5M2867 REV M COUPLER, TRANSMISSION, INLINE, MIL-STD-1553B MMS327 REV K SEALANT, ELECTRICALLY CONDUCTIVE, FORM-IN-PLACE 9M1073, CLAMP, HOSE, FLAT BAND, CUSHIONED 5M3177 REV A, CABLE, RADIO FREQUENCY, FLEXIBLE, TWINAXIAL PS16011.2 REV N - MARKING METHODS AND MATERIALS; TEMPORARY M MMS347 ADDENDUM 1 REV L - APPROVED MMS 347 MATERIALS AND SUP MMS1438 REV F ALUMINUM ALLOY 7050?T73511/?T74511,EXTRUDED SH MMS1438 ADD 1 REV D APPROVED MMS 1438 MATERIAL SOURCES 7M979 REV C, TEE-SWIVEL NUT ON RUN (BEAM SEAL) 5000 PSI 9M744 REV C, RETAINER, BLOCKING-CIRCUIT BREAKER PS15719 REV G - HARDENING 7050 EXTRUSIONS TO THE -T76 TEMPER PS15720 REV G - HARDENING 7075 SHEET AND PLATE UP TO 1.0 INC PS15723 REV G - HARDENING 7050 FORGINGS, PLATE AND EXTRUSION PS15725 REV E - HARDENING 7475-0 ALCLAD (DMS 2234) SHEET TO PS15727 REV D - HARDENING 2004 SHEET TO THE -T6(2) TEMPER PS15737 REV D HARDENING OF 6013 SHEET TO CONDITION - T42 PS15718 REV G ANNEALING 7050 & 7475 SHEET, PLATE PS15764 REV E - HARDENING OF TI-15V-3CR-3SN-3AL SHEET AND S PS15760 REV K - GENERAL HEAT TREATING CRITERIA FOR TITANIUM PS15748 REV G - HARDENING 7075 FORGINGS, EXTRUSIONS AND PLAT PS15735 REV D - HARDENING OF 2024 FROM THE -T3 TO THE -T81 C PS15734 REV G - HARDENING 2024 SHEET, PLATE, EXTRUSIONS, BAR PS15732 REV C - HARDENING 7475 SHEET TO THE -T61 CONDITION PS15730 REV C - HARDENING OF 2219 SHEET AND PLATE FROM THE ST3M612 REV L, NUT - DOUBLE HEX, CASTELLATED, CRES ST3M572 REV L, NUT-SELF-LOCKING, EXTRUDED WASHER, DEOUBLE HE ST3M524 REV L, NUT - 12 POINT, SHEAR, CASTELLATED, CRES NON PS22210 DEVIATION 1 REV K, ARC FUSION WELDING PS15763 REV F, BETA STABILIZATION TREATMENT OF 6AI-6V-2SN MMS819 ADDENDUM 1 REV C, APPROVED MMS 819 MATERIAL SOURCES PS15765 REV D HARDENING OF TI-3AI-8V-6CR-4MO-4ZR PS15762 REV G ANNEALING PROCEDURE PS15738 REV D HARDENING OF 6013 SHEET TO CONDITION -T62 PS15726 REV E - HARDENING 7475-0 BARE SHEET (DMS 2281) TO TH PS15724 REV G - HARDENING 7075 EXTRUSION TO THE -T76 TEMPER PS15721 REV G - HARDENING 7075 PLATE GREATER THAN 1.0 INCHES Issued Date 8/7/2009 8/7/2009 8/7/2009 8/7/2009 7/30/2009 7/29/2009 7/29/2009 7/29/2009 7/29/2009 7/29/2009 7/29/2009 7/27/2009 7/27/2009 7/27/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/24/2009 7/23/2009 7/21/2009 7/17/2009 7/17/2009 7/16/2009 7/16/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 7/9/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSBO-000142 C PSBO-000143 C PSBO-000145 C PSBO-000146 C PSBO-000148 C PSBO-001692 A PSBO-001691 A PSBO-001688 A PSBO-001686 A PSBO-001156 B PSBO-001155 B PSBO-000149 C PSBO-000147 C PSBO-001511 A PSBO-001622 A PSBO-001619 A PSBO-001534 A PSF22-000288 A GPS-CORR-0005 A PSBO-000321 E PSBO-001683 A PSF22-000136 B PSBO-001046 B PSBO-001676 A PSBO-001681 A PSBO-001679 A PSBO-001089 B PSBO-001675 A PSBO-000909 B GPS-CORR-0003 B PSBO-001245 B PSBO-001221 B PSBO-001202 B PSBO-001207 B PSBO-001645 A PSBO-001648 A PSBO-001654 A PSBO-001656 A PSBO-001672 A PSBO-001671 A PSBO-001670 A PSBO-001669 A PSBO-001668 A PSBO-001667 A PSBO-001662 A PSBO-001661 A PSBO-001660 A PSBO-001659 A PSBO-001657 A PSBO-001655 A PSBO-001649 A PSBO-001647 A PSBO-001646 A PSBO-001011 A PSBO-001383 A Title PS15702 REV E - STRESS RELIEF OF 2024, 6061, 7050, AND 7075 PS15706 REV H - HARDENING 2014 SHEET, PLATE, FORGINGS & EXTR PS15710 REV G - HARDENING 2219 SHEET, PLATE, AND EXTRUSIONS PS15711 REV G - HARDENING OF 2024 SHEET, EXTRUSIONS, BARS, P PS15716 REV F - HARDENING OF 6061 SHEET, PLATE, EXTRUSIONS, 30M-NAS1587, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1755, BOEING-ST.LOUIS SUPPLEMENT FOR 30M-MS20365 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-M25677/2 MIL-DTL BOEING ST. LOUIS SUPPLEMENT FOR PS15714 REV D HARDENING OF 7049 FORGED PRODUCTS PS15704 REV F ANNEALING 2024 AND 6061 TO CONDITION-O PS15717 REV G - HARDENING 6061 SHEET, PLATE, EXTRUSIONS, TUB PS15715 REV E - HARDENING 7050 PLATE TO THE -T76 TEMPER 30M-AS14237, BOEING-ST.LOUIS SUPPLEMENT FOR 7M1261 REV A, COUPLING HALF, QUICK DISCONNECT, SELF SEALING 5M250 REV R, CAP - INSULATING, HEAT SHRINKABLE 30M-A-A-55617 BOEING-ST. LOUIS SUPPLEMENT FOR 5PTPBG19H, F-22, MID-FUSELAGE FASTENER SEALING CONVERSION COATING - BRUSH AND SPRAY PS22201 REV T - ARC FUSION WELDING ALUMINUM AND ALUMINUM ALL ST9M517 REV D FASTENER - STUD, QUARTER TURN 5PTPKL09-K ASSEMBLY AND ACC OF F-22 LEADING AND TRAILING EDG 9M736 REV E GROMMET, RUBBER - OIL AND FUEL RESISTANT DPS1.05-2 REV J HARDNESS TESTING PROCEDURES DPS1.05-7 REV W STATISTICAL SAMPLING FOR HARDNESS INSPECTION DPS1.05 REV AC HARDNESS TESTING OF METALS PS11347 REV L BONDING OF ONE-PIECE WINDSHIELDS DPS1.05-1 REV R HARDNESS TESTING EQUIPMENT & PERSONNEL EPB17-119 REV G FLIGHT SAFETY PARTS PROGRAM REQUIREMENTS COATING, MULTICOLORED CHEMICAL CONVERSION COATING OF ALUMINU BAC5771 REV J STRIPPING INORGANIC FINISHES BAC5975 REV M FUSION WELDING OF METALS BAC5440 REV K HOLE PREPARATION MACHINING AND GRINDING STEELS BAC5617 REV U HEAT TREATMENT OF ALLOY STEELS 4M335 REV B, WASHER - C'SUNK CRES 5M3180 REV A, COVER, ELECTRICAL, CONNECTOR, AUDIO RECEPTACLE 30M-NASM14144, BOEING ST-LOUIS SUPPLEMENT FOR 30M-NASM14164, BOEING ST.-LOUIS SUPPLEMENT FOR ST3M797 REV J, NUT - EXTENDED WASHER, SPLINE, CASTELLATED ST3M788 REV J, NUT SELF-LOCKING, SHEAR, CASTELLATED, CRES 45 ST3M787 REV K, NUT - SELF-LOCKING, TENSION, CASTELLATED, CRE ST3M762 REV E, NUT, SELF-LOCKING, SPLINE-CRES, DRY FILM ST3M752 REV H, NUT-SELF-LOCKING, EXTRUDED WASHER, SPLINE ST3M483 REV W, NUT ASSEMBLEY, SELF-LOCKING, GANG CHANNEL MMS819 REV D, SLEEVING, ELECTRICAL INSULATING/WATERPROOFING 30M-NASM35214 REV A, BOEING-ST.LOUIS SUPPLEMENT FOR 30M-NASM21045, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM17828, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM14182, BOEING -ST. LOUIS SUPPLEMENT FOR 30M-NASM14145, BOEING-ST. LOUIS SUPPLEMENT FOR 9M219 REV J, CORD ASSEMBLY - ELASTIC (FOR G.S.E.) 5M1949 REV C, ADAPTER - CONVOLUTED TUBING TO HYDRAULIC FITTI 5M1758 REV G, SWITCH - ROTARY, 6 POLE, 5 POSITION 9M148 REV J RECEPTACLE- TURNLOCK FASTNER, ONE & TWO LUG DPS3.67-44 REV J FLUSH MOUNTED PANEL FASTNERS & INSERTS Issued Date 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/7/2009 7/2/2009 7/2/2009 7/2/2009 7/2/2009 7/2/2009 7/1/2009 6/29/2009 6/29/2009 6/29/2009 6/24/2009 6/24/2009 6/24/2009 6/24/2009 6/24/2009 6/24/2009 6/18/2009 6/18/2009 6/18/2009 6/18/2009 6/18/2009 6/18/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/17/2009 6/11/2009 6/11/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000375 PSBO-000381 PSBO-001643 PSBO-001618 PSBO-001620 PSBO-001624 PSBO-001625 PSBO-001623 PSBO-001621 PSBO-001626 PSBO-001628 PSBO-001641 PSBO-001640 PSBO-001638 PSBO-001637 PSBO-001636 PSBO-001635 PSBO-001634 PSBO-001632 PSBO-001630 PSBO-001629 PSBO-001627 PSBO-001603 PSBO-001616 PSBO-001615 PSBO-001601 PSBO-000363 PSBO-000365 PSBO-000379 PSBO-001174 PSBO-001124 PSBO-000454 PSBO-000412 PSBO-001591 PSBO-001597 PSBO-001596 PSBO-001593 PSBO-001594 PSBO-001595 PSBO-001592 PSBO-000227 PSMR-000007 PSBO-001043 PSBO-001588 PSBO-001342 PSBO-001572 PSBO-001576 PSBO-001575 PSBO-001573 PSF22-000063 PSBO-000392 PSBO-001564 PSBO-001562 PSBO-001560 PSBO-001558 Rev. B B A A A A A A A A A A A A A A A A A A A A A A A A B B B B B B B A A A A A A A D A B A B A A A A C B A A A A Title MMS5024 ADDENDUM 1 REV G - APPROVED MMS 5024 MATERIAL SOURCE MMS5027 ADDENDUM 1 REV G - APPROVED MMS 5027 MATERIAL SOURCE PS20202 REV H REPAIR OF TRANSPARENCY HOLES AND NON-OPTICAL A DMS 2221 REV C ELASTOMER, SILICONE 7M491 REV C, ELBOW, TUBE -45 DEG. BULKHEAD SWAGELOK 30M-A-A-59440/4 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-A-A-59494, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-A-A-52550 BOEING-ST.LOUIS SUPPLEMENT FOR 7M1062 REV D, UNION - TUBE, FLARED, SWIVEL NUT 30M-M7034/1, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-M7034/3, BOEING-ST. LOUIS SUPPLEMENT FOR DMS1980 REV G SILICONE, CELLULAR ST9M437 REV D, STRAP, RETAINING - BARE METAL, 2 HOLE MOUNT 30M-NASM14210, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM14200, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1200, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1199, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NAS1198, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS51940, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS24380, BOEING ST. LOUIS SUPPLENT FOR 30M-M7034/4, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-M7034/2, BOEING-ST. LOUIS SUPPLEMENT FOR 3M1105 REV C, NUT, SELF-LOCKING, SPLINE - CRES, 180 KSI, DRY MMS5047 REV A ADD 1 APPROVED MMS 5047 MATERIAL SOURCES MMS5047 REV A CARBON AND GLASS FIBER BISMALEIMIDE PREPREGS DMS 1556 REV F PLASTIC SHEET, GLASS FABRIC REINFORCED PHENOL MMS310 ADDENDUM 1 REV C - FILM ADHESIVE, HIGH TEMPERATURE MMS350 ADDENDUM 1 REV D - STRUCTURAL ADHESIVE SYSTEM, INTERM MMS5026 ADDENDUM 1 REV F - APPROVED MMS 5026 MATERIAL SOURCE BAC5018 REV J INSTALLATION OF SAFETYING DEVICES BAC5004 REV L INSTALLATION OF PERMANENT FASTNERS DMS2288 REV K - FIBER REINFORCED EPOXY PREPREG, 250F CURE MMS727 ADDENDUM 1 REV B - APPROVED MMS 727 MATERIAL SOURCES 30M-MS122196 THRU MS122235 BOEING-ST. LOUIS SUPPLEMENT FOR MMS5036 ADDENDUM 1 REV D, BOEING MATERIAL SPECIFICATION 30M-NASM122236 THRU NASM122275 30M-MS122236 THRU MS122275 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM14219 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NASM122196 THRU NASM122235 BOEING-ST. LOUIS SUPP FOR 5M2255 REV D, CONNECTOR-ELECTRICAL, RECEPTACLE, RESISTOR PS20022 REV P - CHEMICAL MILLING STM-P-L107, DPS3.17-49 REV AR, LUBRICATION OF DC-9, MD-80, MD-90 & 717 ST7M393 REV G CONNECTOR ? TUBE COUPLING,BEAM SEAL TO MALE FL D6-51991 REV I QUALITY ASSURANCE STANDARD FOR DIGITAL PRODUC 6M227 REV D, BLOCK, CLAMP - TUBE SUPPORT, BUILDUP NUMBER 30M-NASM21209, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS21209 REV A, BOEING-ST. LOUIS SUPPLEMENT 7M1181 REV A, ADAPTER, STRAIGHT, TUBE - MAIL BEAM SEAL REDUC 5PTPLL11-F, FABRICATION OF BISMALEIMIDE COMPOSITES MMS527 REV E - CLOTH, GLASS, 104E, DRY A1100 SOFT FINISH PS12030 KAI DEVIATION 1, CLEANING, ALKALINE PS12030 GA DEVIATION 1 CLEANING, ALKALINE MMS1236 ADDENDUM 1 REV B, BOEING MATERIAL SPECIFICATION 30M-NASM124811 THRU NASM124850, BOEING ST. LOUIS SUPPLEMENT Issued Date 6/9/2009 6/9/2009 6/9/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/28/2009 5/20/2009 5/20/2009 5/20/2009 5/19/2009 5/18/2009 5/18/2009 5/18/2009 5/18/2009 5/18/2009 5/18/2009 5/18/2009 5/13/2009 5/13/2009 5/13/2009 5/13/2009 5/13/2009 5/13/2009 5/13/2009 5/7/2009 5/7/2009 5/7/2009 5/7/2009 5/5/2009 4/29/2009 4/29/2009 4/29/2009 4/29/2009 4/27/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001557 PSBO-001556 PSBO-001555 PSBO-001554 PSBO-001553 PSBO-001570 PSBO-001569 PSBO-001567 PSBO-001566 PSBO-001565 PSBO-001552 PSBO-001551 PSBO-001549 PSBO-001548 PSBO-001547 PSBO-001545 PSBO-001544 PSBO-001543 PSBO-001542 PSBO-001541 PSBO-001538 PSBO-001536 PSBO-001533 PSBO-001532 PSF35-000096 PSF35-000095 PSF35-000091 PSF35-000092 PSF35-000094 PSF35-000093 PSF35-000009 PSF35-000073 PSF35-000088 PSF35-000085 PSF35-000084 PSF35-000083 PSF35-000081 PSF35-000080 PSF35-000079 PSF35-000078 PSF35-000074 PSF35-000072 PSF35-000062 PSF35-000067 PSF35-000068 PSF35-000070 PSF35-000064 PSF35-000059 PSF35-000036 PSF35-000058 PSF35-000056 PSF35-000054 PSF35-000052 PSF35-000051 PSF35-000050 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A A A A A A A A A Title 30M-NASM124771 THRU NASM124810, BOEING ST. LOUIS SUPPLEMENT 30M-NASM124731 THRU NASM124770, BOEING-ST. LOUIS SUPPLEMENT 30M-NASM124691 THRU NASM124730 BOEING-ST. LOUIS SUPPLEMENT 30M-NASM124651 THRU NASM124690, BOEING ST. LOUIS SUPPLEMENT 30M-NASM122156 THRU NASM122195, BOEING ST. LOUIS SUPPLEMENT ST3M833 REV H, BOLD-SELF RETAINING, POSITIVE LOCKING, HEX PS17130.1 SUPPLEMENT 2 CONNECTORS, ELECTRICAL, CRIMP TYPE: PS14290 REV T, DEVIATION 2, COMPOSTIE AND BONDING CURE CYCL PS12050.1 KAI DEVIATION 1, PICKLING ALUMINUM ALLOYS PS12050.1 GA DEVIATION, PICKLING ALUMINUM ALLOYS 30M-NASM122116 THRU NASM122155, BOEING-ST. LOUIS SUPPLEMENT 30M-NASM122076 THRU NASM122115, BOEING ST. LOUIS SUPPLEMENT 30M-MS124811 THRU MS124850, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS124771 THRU MS124810 BOEING ST. LOUIS SUPPLEMENT FOR 30M-MS124731 THRU 124770, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS124651 THRU MS124690, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS122156 THRU MS122195, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS122116 THRU MS122155, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS122076 THRU MS122115 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS9276, BOEING ST. LOUIS SUPPLEMENT FOR 30M-A-A-55619 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-A-A-55618 BOEING-ST. LOUIS SUPPLEMENT FOR 9M152 REV F, RECEPTACLE-AIRLOC FASTENER 30M-NAS1756 REV A, BOEING-ST. LOUIS SUPPLEMENT 2PYA00002-0003 JSF TEAMMATE PACKAGING, HANDLING, STORAGE, AN LMA-PT009B COMPOSITE MATERIALS, BATCH ACCEPTANCE TEST METHOD LMA-PK012B BONDING WITH GENERAL PURPOSE ADHESIVES LMA-PK021A WIRE ROPE, SLEEVE SWAGING- EYE AND LAP SPLICE LMA-PT008B STANDARD TEST PROCEDURES FOR REINFORCED PLASTIC, LMA-PL026A GLASS REINFORCED PLASTIC PARTS, PROCESSING AND QA LMA-PB023B INSTALL OF BEARINGS STAKED AND SWAGED LMA-PA018C FORMING OF ALUMINUM ALLOYS, ENG AND INS REQ LMA-PG101 CLEANING OF CORROSION AND HEAT RESISTANT ALLOYS AN LMA-PC007A REQ FOR MAGNETIC PARTICLE INSP PROCEDURES LMA-PC006 INSPEC, DEMONSTRATION REQ FOR NON INSP LMA-PB108A INSTALLATION PROCEDURE FOR RADIUS BLOCKS LMA-PB033C INSTALLING, SEALING, AND COATING OF BEARINGS CHIL LMA-PB029D INSTALLATION OF EXPANDED BUSHINGS IN METALLIC STR LMA-PB027A INSERT INSTALLATION, SCREW THREAD LMA-PB019A FASTENER SEALING AND INSTALLATION LMA-PA054 FORMING OF FERROUS AND NICKEL ALLOYS, ENG AND INSP LMA-PA005 ABRASIVE WATERJET PATTERN CUTTING OF TITANIUM SHEE LMA-MB005A/F35-01 PREPREG, E-GLASS FABRIC, WOVEN BISMALEIMID 2ZZP00044 RECTIFICATION OF DISTORTION IN MACHINED,METALLIC, 2ZZP00052 THREAD ROLLING OF STEEL AND TITANIUM ALLOY COMP CMA-0003G CONFIGURATION MANAGEMENT REQUIREMENTSFORSUPPLIERS LMA-MB029B/F35-01EPOXY RESIN PREIMPREGNATED MATERIAL FOR HIG LMA-MU006C SEALANT, POLYSULFIDE, CORROSION-RESISTANT 2ZZZ00017 AMEND 4 FILLED ELASTOMERIC SEALS, SPACERS AND GASK LMA-MU003 SEALING COMPOUND, FUEL RESISTANT, ELECTRICALLY CON LMA-MR005A THIN FILM CERAMIC EPOXY COATING LMA-ML082B RETAINING COMPOUNDS AND PRIMERS LMA-ML069A TWO-PART EPOXY ADHESIVE FOR USE IN INTEGRAL FUEL LMA-ML025B EPOXY RESINS FOR HIGH TEMP APPLICATIONS LMA-ML015 GENERAL PURPOSE NON-STRUCTURAL SOLVENTTHINNED Issued Date 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/24/2009 4/15/2009 4/15/2009 4/15/2009 4/15/2009 4/15/2009 4/15/2009 4/15/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/14/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF35-000049 PSF35-000048 PSF35-000047 PSF35-000046 PSF35-000045 PSF35-000038 PSF35-000039 PSF35-000040 PSF35-000043 PSF35-000042 PSF35-000037 PSBO-000377 PSBO-001527 PSBO-000391 PSBO-001509 PSBO-001512 PSBO-001513 PSF22-000254 PSBO-001510 PSBO-001508 PSGE-000019 PSBO-000176 PSBO-000328 PSBO-000998 PSBO-001014 PSPW-000004 PSPW-000029 PSPW-000035 PSPW-000037 PSPW-000038 PSPW-000036 PSPW-000034 PSPW-000028 PSPW-000027 PSMR-000003 PSMR-000004 PSMR-000005 PSMR-000006 PSBO-000451 PSF22-000198 PSF22-000024 PSF22-000267 PSF22-000274 PSF22-000285 PSMR-000001 PSF22-000286 PSF22-000276 PSF22-000273 PSF22-000262 PSF22-000185 PSF22-000089 PSF22-000158 PSF22-000092 PSF22-000010 PSF22-000269 Rev. A A A A A A A A A A A B A C A A A B A A A D D B B B B B B B B B B B A A A A B B D B A A A A A A B B E B C C A Title LMA-ML013A TWO-PART, ROOM TEMP CURING, EPOXY ADHESIVE WITH H LMA-ML004B ROOM TEMP CURING TWO PART EPOXY LAMINATING RESIN LMA-MK000 TEFLON SHEET AND ROD LMA-MG055A TAPE AND CLOTH GLASS FABRIC LMA-MF094C COLOR CODED PRESSURE SENSITIVE ADHESIVE ID TAPE LMA-ME021A SYNTHETIC RUBBER SHEET LMA-ME024A LOW AND HIGH TEMPERATURE AND TEAR RESISTANT SIL LMA-MF015C NON-STRUCTURAL, UNSUPPORTED ADHESIVE FILM LMA-MF093C PRESSURE SENSITIVE ADHESIVE BACKED POLYESTER OL F LMA-MF092B PRESSURE SENSITIVE ADHESIVE BACKED POLYESTER ID T LMA-M7006C TITANIUM ALLOY PLATE DAMAGE TOLERANT GRADE, MMS5025 ADDENDUM 1 REV E - APPROVED MMS 5025 MATERIAL SOURCE PS23503 REV N PACKAGING, IDENTIFICATION AND STORAGE OF COVER MMS525 ADDENDUM 1 REV M- APPROVED MMS 525 MATERIAL SOURCES 7M128 REV F, PACKING WITH RETAINER 30M-AS14238, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-MS14238 REV A, MDAE SUPPLEMENT FOR LMA-ML074D TWO PART ACRYLIC ADHESIVE 30M-AS5406 REV A, BOEING-ST. LOUIS SUPPLEMENT FOR 4M106 REV AT, BUSHING, SLEEVE - CLAMP UP, SPECIAL P1TF17 S13, SOURCE SUBSTANTIATION ADMIN REQMTS PS16001.11 REV F - DOUBLE MARKING C-17 TUBE ENDS BY ELECTRO PS23041 REV V - MACHINED PARTS, REQUIREMENTS AND ACCEPTANCE 5M2804 REV J SWITCH, ROTARY, SEALED, MIL-DTL-3786/4 TYPE H 30M-AN937, BOEING-ST. LOUIS SUPPLEMENT FOR SP-NDTQ REV C, SPACE PROPULSION NONDESTRUCTIVE TEST QUALIF PWA367 REV P ENGINEERING CONTROLLED PROCESSES PWA422 REV R CURING AGENT, EPOXY RESIN PWA615 REV AE APPLICATION OF SEALING AND FILLING COMPOUNDS PWA83 REV AE CLEANING OF PARTS TO BE ADHESIVE BONDED, SEALE PWA457 REV L ADHESIVE PASTE, EPOXY PWA421 REV M LIQUID EPOXY RESIN PWA36516 REV H FLUOROELASTOMER COATING PWA36481 REV A FABRIC, HYBRID, WOVEN CARBON, AND E GLASS FI 1024-005P REV C ACCEPTANCE TEST PROCEDURE FOR P&W CASCADE 8000-CAS-1 REV C INSTRUCTIONS FOR PW4168 CASCADE INSP GAGE 8000-CAS-2 REV ORIG ULTRASONIC TESTING TECH FOR COMP BONDED 8000-CAS-3 REV - SHORT MEAN SHEAR TEST SAMPLING PLAN FOR FAN DMS1974 REV W - CORE MATERIAL: AROMATIC POLYAMIDE PAPER/PHEN 5PTPRT04-D-A03 ELECTRICAL WIRE BUNDLE INSTALLATION 5PTMKT03-B-A01 MATERIAL SPEC MOLDABLE PLASTIC SHIM 5PTPYB02 SERIALIZATION AND TRACEABILITY OF ASSEMBLIES 5PTPDG01-A APPLICATION OF THERMAL BARRIER COATING FQPL-5PTPNG01-2 FORT WORTH QUALIFIED PRODUCT LIST 5PTPNG01 STM-P-L102 FQPL-5PTPTG16 FORT WORTH QUALIFIED PRODUCTS LIST 5PTPTG16 5PTPKG16F, AMD 1 PROCESS AND QUALITY CONTROL OF 5PTPAL04 CHEMICAL MILLING OF ALUMINUM ALLOYS 5PTV5516 REV - GAUGE - PNEUMATIC PRESSURE 5PTPRT03-B-A03 ELECTRICAL AND ELECTRONIC WIRING FOR MODEL F/ 5PTPBT01-K- BOLT SCREW AND NUT INSTALLATION, GENERAL REQ 5PTPNL01-B-A03 APP OF ADH-BACKED NAMEPLATES AND DECALS 5PTPCT07-C INSPECTION, ACCEPTANCE CRITERIAL FOR METAL PA 5PTMBT06-H MATERIAL SPEC PREPREG, WOVEN FABRIC, BISMALEIMIDE 5PTC4005 REV C TUBE SUPPORT ASSY - FUEL LINE Issued Date 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/13/2009 4/8/2009 4/8/2009 3/30/2009 3/30/2009 3/30/2009 3/30/2009 3/30/2009 3/30/2009 3/30/2009 3/27/2009 3/23/2009 2/27/2009 2/17/2009 2/17/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/16/2009 2/11/2009 2/11/2009 2/11/2009 2/11/2009 2/6/2009 2/3/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 2/2/2009 1/30/2009 1/30/2009 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000268 PSF22-000263 PSF22-000261 PSF22-000166 PSBO-001498 PSBO-000752 PSBO-001497 PSBO-000571 PSBO-001495 PSBO-001482 PSBO-001489 PSBO-001491 PSBO-001490 PSBO-001488 PSBO-001483 PSBO-001484 PSBO-001487 PSBO-001485 PSBO-001363 PSBO-001494 PSBO-001472 PSBO-001477 PSBO-001473 PSBO-001475 PSF22-000260 PSBO-001003 PSBO-001465 PSBO-001467 PSBO-001462 PSBO-001448 PSBO-001459 PSBO-001451 PSBO-001452 PSBO-001454 PSBO-001458 PSBO-001455 PSBO-001450 PSBO-001449 PSBO-000140 PSBO-001447 PSBO-001446 PSBO-001445 PSBO-001444 PSBO-001443 PSBO-001442 PSBO-001441 PSBO-001440 PSBO-001439 PSBO-001438 PSBO-001437 PSBO-001436 PSBO-001435 PSBO-001434 PSBO-001433 PSBO-001432 Rev. A A B B A B A B A A A A A A A A A A B A A A A A A B A A A A A A A A A A A A B A A A A A A A A A A A A A A A A Title 5PTC1217 LABEL, BAR CODE IDENTIFICATION, MOD LMA-MC002 FIBER, SILICON CARBIDE, FOR STRUCTURAL COMPOSITES 5PTPUL01-A PROTECTION OF PARTS AND MATERIALS IN STORAGE AND 5PTC1208 REV F LABEL, EDGE AND ANTENNA BAC5753 PSD9-58 ORG CLEANING, DESCALING AND SURFACE PREPARA BAC5650 REV D, HARDNESS TESTING D37520-1 REV R, SUPPL PART PROTECTION GUIDE ? INTRODUCTION BSS7630 REV G SHOT PEENING OPERATIONS PERSONNEL CERTIFICATIO PS13630.3 REV J REWORK OF PAINTED SURFACES DPS3.67-66, REV F, INSTALLATION OF 2ASP (3DO2(XX)) FASTENER DMS 1881, REV H, FORGINGS, TITANIUM DMS 2150, REV B, CORROSION INHIBITING COMPOUND, SOFT FILM, W DMS 2442, REV E, TITANIUM INGOT DMS 2441, REV D, SELF SEALING FIBER REINFORCED MODIFIED PHEN DPS2.590-2, REV BR, SEALING, PRESSURE - DC-9/MD-90/717 SERI DPS1.834-3.1, REV BU, ELECTRICAL CONNECTORS - GENERAL REQUI DMS 2453, REV C, WIRE ROPE, AIRCRAFT, NYLON JACKETED AND TIN DPS1.834-13.2, REV U, CONNECTORS, COAZIAL CABLE - COMMERCIA DPS3.67-74 REV G SPLIT SLEEVE COLD WORKING - HOLES AND COUN DMS 1841, REV L, STEEL, HY-TUF (SPECIAL AEROSPACE QUALITY) 30M-AS9490 - AS9490, BOEING- ST. LOUIS SUPPLEMENT FOR 5M2816 REV B, TERMINAL STUD, BONDED-ELECTRICAL 30M-AS9492- AS9492, BOEING- ST. LOUIS SUPPLEMENT FOR 30M-AS9493, AS9493, BOEING-ST. LOUIS SUPPLEMENT FOR LMA-PA052A, FORMING OF TITANIUM, ENGINEERING AND INSPECTION 7M151 REV M TEE, TUBE- FLARED, SWIVEL NUT ON RUN ST3M352 REV D, PIN - RIVET, THREADED, TAPERED, SHEAR, 100 HE ST5M1469 REV F, SWITCH - ROTARY, 1 POLE, 5 POSITION, - PUSH 5M3137 REV B, SHIELD TERMINATION, SOLDER STYLE, INSULATED, H PS15917 REV B, ANNEALING AZ-31B (ANY CONDITION) DPS4.903 REV L, OXYGEN, LIQUID PS15929 REV B, HEAT TREATMENT OF 1095 BELLEVILLE WASHERS ST9M390 REV G, CLAMP-HOSE, FLAT BAND 30M-MS21056 REV A, MS21056, BOEING-ST. LOUIS SUPPLEMENT FOR DPS1.834-7 REV DF, FABRICATING AND INSTALLING WIRE HARNESSE 30M-MS21058 REV A, MS21058, BOEING-ST. LOUIS SUPPLEMENT FOR PS15923 REV B, ANNEALING 19-9DL PS15918 REV B, STRAIN RELEASE OF COPPER BASE ALLOY SPRINGS PS15631 REV D - AGE HARDENING OF ALLOY A-286 PS15633 REV C , ANNEALING INCONEL ALLOY 625 PS15630 REV C SOLUTION HEAT TREATMENT AND AGING OF ALLOY PS15620 REV C ANNEALING ALLOY 400 ( MONEL) PS15614 REV C, ANNEALING OF INCONEL ALLOY 718 PS15613 REV B, AGE HARDENING OF SPRING TEMPER INCONEL ALLOY PS15612 REV B, AGE HARDENING OF SOLUTION TREATED INCONEL ALL PS15611 REV B, AGE HARDENING OF NO. 1 TEMPER INCONEL ALLOY X PS15610 REV D, HARDENING INCONEL ALLOY X-750 PS15609 REV D, HARDENING INCONEL ALLOY X-750 TO RC30 TO RC37 PS15608 REV C, STRESS EQUALIZE INCONEL ALLOY X-750 (INCONEL PS15607 REV C, ANNEALING OF INCONEL ALLOY X-750(INCONEL X) PS15606 REV C, STRESS EQUALIZE INCONEL ALLOY 600 (INCONEL)WI PS15605 REV C, STRESS RELIEF OF INCONEL ALLOY 600(INCONEL)WI PS15604 REV C, ANNEALING INCONEL ALLOY 600(INCONEL)WIRE & ST PS15603 REV C, AGE HARDENING OF SOLUTION HEAT TREATED INCONE MMS1236 REV C, STRUCTURAL QUALITY D357.0-T6 SAND & INVESTMEN Issued Date 1/30/2009 1/30/2009 1/30/2009 1/30/2009 1/28/2009 1/26/2009 1/26/2009 1/22/2009 1/21/2009 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/10/2008 11/7/2008 11/7/2008 11/5/2008 11/5/2008 11/5/2008 11/5/2008 11/4/2008 10/22/2008 10/22/2008 10/22/2008 10/15/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/9/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 10/8/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000014 PSBO-001428 PSBO-001422 PSBO-000628 PSBO-000531 PSBO-000537 PSBO-000541 PSBO-001417 PSBO-000084 PSBO-001416 PSBO-001414 PSBO-000228 PSBO-001399 PSBO-000473 PSBO-001392 PSBO-001393 PSBO-000810 PSBO-000850 PSBO-000851 PSBO-001388 PSBO-001384 PSBO-001386 PSBO-001387 PSBO-000530 PSBO-000444 PSBO-000686 PSBO-000687 PSSA-000142 PSSA-000143 PSBO-001356 PSBO-001360 PSBO-001359 PSBO-001365 PSBO-001370 PSBO-001375 PSBO-001379 PSBO-001377 PSSA-000158 PSSA-000157 PSSA-000156 PSSA-000155 PSSA-000154 PSSA-000153 PSSA-000152 PSSA-000151 PSBO-001372 PSSA-000160 PSSA-000159 PSBO-001368 PSBO-001364 PSSA-000129 PSSA-000144 PSBO-000818 PSSA-000131 PSSA-000130 Rev. H A A B B B B A C A A B A B A A B B C A A A A C B B B A A A A A A A A A A A A A A A A A A A A A A A A A B A A Title PS11200 REV W - MIXING, FREEZING, STORAGE AND THAWING OF SEA 30M-MS27576 REV A, MS27576, BOEING ST. LOUIS SUPPLEMENT FOR 30M-NAS1352 REV B, NAS1352, BOEING- ST LOUIS SUPPLEMENT FOR BAC5613 REV T HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOY BAC5019 REV U CHROMIC ACID ANODIZING BAC5307 PSD8-25 PART MARKING BAC5632 REV D BORIC ACID - SULFURIC ACID ANODIZING DPS4.710-2 REV L SHEET METAL FABRICATION PRACTICES PS14108 REV M - CANCEL NOTICE PS20184 REV C LASER CUTTING OF METALS PS18076 REV G LUBRICATION OF F/A-18 AIRCRAFT PS20022.11 REV U - MASKING AND SCRIBING FOR CHEMICAL MILLING 30M-NAS1081 REV G, NAS1081, BOEING-ST. LOUIS SUPPLEMENT FOR MMS417 ADDENDUM NO. 1 REV. F - APPROVED MMS 417 MATERIAL SO ST7M204 REV H, ELBOW TUBE-45, SWIVEL NUT (BEAM SEAL) ST7M250 REV L, PLUG FLUID FITTING, BEAM SEAL DMS2307 REV E CASTINGS, ALUMINUM ALLOY D357.0-T6 DMS 2212 REV F GLASS FIBER CLOTH, EPOXY RESIN IMPREGNATED DQS1.6-1 REV AK LIMITED LIFE, INSTALLED EQUIP ITEMS COMMERIC 30M-MS21049 REV A, MS21049, BOEING-ST. LOUIS SUPPLEMENT FOR DPS1.834-30.1 REV D, HEAT SHRINKABLE TUBING-COMMERCIAL DPS2.590-4 REV FE, SEALING, SAFETY & CORROSION-DC-9/80/717 DMS 2278 REV C, FOAM, RIGID, CLOSED CELL, POLYMETHACRYLIMIDE PS14161.1 REV K FLUID PIPING AND FITTINGS; FABRICATION OF (D PS21335.15 REV B - PHYSIOCHEMICAL TEST METHODS: DETERMINATIO PS16120 REV M IDENTIFICATION MARKING OF METALS PS17410.4 REV AL CONNECTORS, ELECTRICAL, CRIMP TYPE; ASSY OF SS8706 REV 2 TITANIUM PARTS, LOCAL BLENDING OF SS8712 REV 1 AMD 1, ETCHING REMOVAL OF FLOWED METAL DPS1.07-49 REV V CEMENTING SILICONE & FLOUROSILICONE RUBBER DPS1.950 REV AR METAL ADNESIVE BONDING DPS1.624-2 REV F NO-BLEED PROCESS -350 F CURING PREPREG DPS3.69-1 REV A STRETCH STRAIGHTENING OF ROLLED SECTIONS DPS4.50-36 REV - EPOXY (FR) COATING SYSTEM DPS4.999 REV W SHOT PEENING OF METAL PARTS DPS9.483 REV AA CHEMICAL MILLING TITANIUM ALLOYS DPS9.85 REV H PLASMA ARC SPRAYING SS8423 REV 5 DEV 3 DEGREASING OF METAL PARTS SS8423 REV 5 DEV 2 DEGREASING OF METAL PARTS SS8423 REV 5 DEV 1 DEGREASING OF METAL PARTS SS8423 REV 5 DEGREASING OF METAL PARTS SS8409 REV 6 DEV 6 PLATING, CYANIDE COPPER, STOP OFF FOR CA SS8409 REV 6 PLATING, CYANIDE COPPER STOP OFF FOR CASE HARDE SS8049 REV 03 AMD 01, STELL, 4340, PROCESSING FOR 260-280 SS8049 REV 03 STEEL, 4340, PROCESSING FOR 260 - 280 KSI DPS4.514 REV C USE OF TEMPERATURE INDICATING MATERIALS SS8423 REV 5 DEV 5 DEGREASING OF METAL PARTS SS8423 REV 5 DEV 4 DEGREASING OF METAL PARTS DPS3.69-10 REV C FORMING OF 6000 SERIES ALUMINUM ALLOYS DPS3.69 REV E FORMING ALUMINUM- GENERAL SS8810 REV 0 ORIG ELECTRICAL CONDUCTIVITY TEST FOR MEASUREME SS8810 REV 0 DEV 2, ELECTRICAL CONDUCTIVITY TEST FOR MEASURE DPS3.67-62.1 REV H INSTALLATION OF FTI RIVETLESS NUTPLATES SS9220 REV 5 AMD 1, ADHESIVE BONDED COMP SANDWICH PANELS SS9220 REV 5 ADHESIVE BONDED COMPOSITE SANDWICH PANELS, HONE Issued Date 10/1/2008 10/1/2008 9/29/2008 9/25/2008 9/24/2008 9/24/2008 9/24/2008 9/23/2008 9/22/2008 9/22/2008 9/22/2008 9/19/2008 9/19/2008 9/19/2008 9/18/2008 9/18/2008 9/16/2008 9/16/2008 9/16/2008 9/11/2008 9/8/2008 9/8/2008 9/8/2008 9/2/2008 8/29/2008 8/29/2008 8/29/2008 8/18/2008 8/18/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/6/2008 8/5/2008 8/5/2008 8/4/2008 8/4/2008 8/4/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000132 PSSA-000141 PSSA-000140 PSSA-000139 PSSA-000138 PSSA-000137 PSSA-000136 PSSA-000135 PSSA-000134 PSSA-000133 PSSA-000109 PSSA-000128 PSSA-000127 PSSA-000110 PSSA-000111 PSSA-000116 GPS-CLEN-0001 PSBO-000403 PSBO-000404 PSF35-000033 PSF35-000030 PSF35-000029 PSF35-000026 PSF35-000024 PSF35-000023 PSF35-000020 PSF35-000019 PSF35-000018 PSBO-001354 PSBO-001348 PSF22-000251 PSF22-000250 PSF22-000249 PSBO-001345 PSBO-001346 PSF22-000224 PSF22-000228 PSF22-000230 PSF22-000232 PSF22-000246 PSF22-000245 PSF22-000242 PSF22-000241 PSF22-000238 PSF22-000237 PSF22-000236 PSF22-000235 PSF22-000234 PSF22-000233 PSF22-000231 PSF22-000229 PSF22-000226 PSF22-000059 PSBO-001306 PSBO-001311 Rev. A A A A A A A A A A A A A A A A E B B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A Title SS9220 REV 5 AMD 2, CORE REQUIRE FOR ADHESIVE BONDED SS9225 REV 14 AMD 04, ADHESIVE BONDED ALUM SANDWICH SS9225 REV 14 AMD 03, ADHESIVE BONDED ALUM SANDWICH SS9225 REV 14 AMD 02, ADHESIVE BONDED ALUM SANDWICH PANE SS9225 REV 14 AMD 01, ADHESIVE BONDED ALUM SANDWICH PANE SS9225 REV 14 ADHESIVE BONDED ALUM SANDWICH PANELS SS9220 REV 5 DEV 1 REQ FOR ADHESIVE BONDED COMP SANDWICH SS9220 REV 5 AMD 5, REQUIRE FOR ADHESIVE BONDED COMPO SS9220 REV 5 AMD 4, CORE REQUIREMENTS FOR ADHESIVE BONDE SS9220 REV 5 AMD 3, CORE REQUIREMENT ADHESIVE BONDED B 594-06 STANDARD PRACTICE FOR ULTRASONIC INSP OF ALUM-ALLOY SS8810 REV 0 AMD 2, CONDUCTIVITY TEST MEASUREMENTS OF HE SS8810 REV 0 AMD 1, ELECTRICAL CONDUCTIVITY TEST FOR MEA MIL-A-8625, ANODIC COATING FOR ALUM AND ALUM ALLOYS MIL-A-8625 F (1), ANODIC COATINGS FOR ALUM AND ALUM A SS8423 REV 5 AMD 2, DEGREASING OF METAL PARTS CLEANING, DESCALING & SURFACE PREP OF TITANIUM ALLOYS MMS544 REV K - CARBON/EPOXY PREPREG CLOTH MMS544 ADDENDUM 1 REV T - APPROVED MMS 544 MATERIAL SOURCES 2ZZP00002-002 AMD 2 PS FOR THE MAN AND QA CONTROL OF JSF 2ZZP00004-002 AMD 3 PS FOR THE MAN AND QA CONTROL OF JSF 2ZZP00005A DRILLING AND MACHINING OF COMPOSITE AND COMPOSITE 2ZZP00017A ENVIRONMENTAL AND PRESSURE SEALING, AIRCRAFT 2ZZZ00001B SYNTACTIC FILM. EPOXY 2ZZZ00005B COMPOSITE PLY PREPREG, BMI RESIN LMA-PC005B INSPECTION, ACCEPTANCE CRITERIA, FOR COMPOSITE PA LMA-PC008 REQUIREMENTS FOR ULTRASONIC INSPECTION PROCEDURES LMA-PN007A PART BAR CODE MARKING D6-82479 REV E BOEING QUALITY MANAGEMENT SYSTEM REQUIREMENTS D8-5000 REV J DEFINITION OF FINISH CODES LMA-MB018B ADHESIVE COATED CU MESH FOR LIGHTNING STRIKE PROT LMA-MB006B PREPREG, E-GLASS FABRIC WOVEN BISMALEIMIDE RESIN LMA-MB005A PREPREG, E-GLASS FABRIC, WOVEN BISMALEIMIDE RESIN BSS7006 REV D IDENTIFICATION CALSSIFICATION AND STORAGE OF W BSS7015 DIMENSIONAL CONTROL OF CASTINGS AND FORGINGS 5PTMDL17-QPL-1 QUALIFIED PRODUCT LIST FOR 5PTMDL17 5PTMLL09-QPL-1 QPL FOR 5PTMLL09 (ADHESIVES, EPOXY FILM, 250 5PTMVL01-B HAND CLEANING SOLVENTS, LOW VAPOR PRESSURE 5PTPAG17D A-1 METAL REMOVAL ENGINEERING REQUIREMENTS 5PTPTG16A FCT SPEC FOR TITANIUM BULKHEADS 5PTPNL02-A FABRICATION OF ALUMINUM PHOTOSENSITIVE NAME PLATE 5PTPKT05-B-V03 APPLICATION OF CASTING RESIN TO BONDED ASSEMB 5PTPJL02-B SILK SCREEN PRINTING PROCESS 5PTPGL01-D CLEANING OF TITANIUM AND TITANIUM ALLOYS 5PTPCT16-C FIRST PART QUALIFICATION, FORGINGS AND MACHINED 5PTPCL05-B GENERAL INSPETION REQUIREMENTS FOR CASTINGS 5PTPBL15-A SLEEVEBOLT SYSTEM, INSTALLATION OF 5PTPBG28B COLD WORKING OF HOLES, ENGINEERING AND INSPECT 5PTPAG41 FORGING PROCESS, ENGINEERING AND INSPECTION REQUIRE 5PTMVL01-QPL-3 QUALIFIED PRODUCTS LIST FOR 5PTMVL01 5PTMLT05-QPL-1 QUALIFIED PRODUCTS LIST FOR 5PTMLT05 5PTMKT02-C-V01 POTTING COMPOUNDS FOR REINFORCING HONEYCOMB S 5PTPKL17-C PROCESS SPEC ADHESIVE BONDING, UNCONTROLLED ENV BAC5756 PSD 9-2 APPLICATION OF HEAT-TREAT PROTECTIVE COATING BAC5793 PSD6-76 APPLICATION OF CORROSIONRESISTANT FINISH FO Issued Date 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/4/2008 8/1/2008 8/1/2008 8/1/2008 8/1/2008 8/1/2008 8/1/2008 7/24/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/23/2008 7/18/2008 7/15/2008 7/15/2008 7/15/2008 7/15/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/11/2008 7/10/2008 7/10/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001325 PSBO-001339 PSF22-000222 PSF22-000221 PSF22-000217 PSF22-000216 PSF22-000213 PSF22-000209 PSBO-001340 PSBO-001338 PSBO-001317 PSBO-001172 PSBO-001218 PSBO-001222 PSBO-001224 PSBO-001229 PSBO-001268 PSBO-001263 PSBO-001260 PSBO-001254 PSBO-001251 PSBO-001248 PSBO-001247 PSBO-001243 PSBO-001241 PSBO-001292 PSBO-001288 PSBO-001285 PSBO-001280 PSBO-001279 PSBO-001277 PSBO-001273 PSBO-001270 PSBO-001269 PSBO-001240 PSBO-001238 PSBO-001237 PSBO-001235 PSBO-001234 PSBO-001233 PSBO-001231 PSBO-001230 PSBO-001304 PSBO-001300 PSBO-001299 PSBO-001298 PSBO-001297 PSBO-001296 PSBO-001295 PSBO-001294 PSBO-001293 PSBO-001227 PSBO-001223 PSBO-001220 PSBO-001217 Rev. A A A A A A A A A A A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title BAC5793 PSD9-22 APPLICATION OF CORROSIONRESISTANT FINISH FO D2-5000 REV CH PROTECTIVE FINISH CODES 5PTMBT05-QPL QPL FOR PREPREG, E_GLASS FABRIC, WOVEN BISMALEI 5PTMBT04-QPL-2 PREPREG, S-2 GLASS FABRIC, WOVEN BISMALEIMIDE 5PTD4406 REV - CUTOUT D-HOLE CONNECTOR- ELECTRICAL JAM NUT 5PTD3032 REV B CUTOUT, ELECTRICAL RECEPTACLE, JAM NUT 5PTC4206 REV K BLOCK, RADIUS - TITANIUM AND ALUMINUM 5PC00012E ENGINEERING/ MANUFACTURING DEVELOPMENT NONDESTR D2-5000 PSD 9-1 PROTECTIVE FINISH CODES BAC5439 PSD 6-22 ULTRASONIC INSPECTION BAC5793 PSD6-85 APPLICATION OF CORROSIONRESISTANT FINISH FO BAC5719 REV Y CHEMICAL CONVERSION COATINGS FOR ALUMINUM AND BAC5435 FINAL LETTER BAC5940 REV E SILVER BRAZING BAC5701 REV N CADMIUM PLATING BAC5408 PSD6-39 VAPOR DEGREASING BAC5749 PSD 6-111 ALKALINE CLEANING BAC5749 PSD 6-102 ALKALINE CLEANING BAC5749 PSD 6-79 ALKALINE CLEANING BAC5436 PSD8-19 ETCH INSPECTION OF GROUND MACHINED STEEL PAR BAC5665 PSD 6-1 APPLICATION OF SOL-GEL BAC5650 PSD 6-5 HARDNESS TESTING BAC5621 REV K TEMPERTURE CONTROL FOR PROCESSING OF MATERIALS BAC5613 PSD6-46 HEAT TREATMENT OF TITANIUM AND TITANIUM ALL BAC5424 PSD6-40 MARNETIC PARTICLE INSPECTION BAC5751 REV L CLEANING, DESCALING AND SURFACE PREPARATION OF BACS22C REV L STRIP, RECEPTACLE PANEL FASTNER, FLAT MOUNTING BACD2023 REV B SERRATIONS, FLAT, PARALLEL BACB28T REV P, BUSHING, FLANGED, PRESS FIT, STEEL BAC5749 PSD 6-133 AKALINE CLEANING BACB16R REV B BOX, FORGED BAC5749 PSD 6-129 ALKALINE CLEANING BAC5749 PSD 6-119 ALKALINE CLEANING BAC5749 PSD 6-118 ALKALINE CLEANING BAC5777 REV G WASHER PRIMER, APPLICATION OF BAC5408 PSD6-58 VAPOR DEGREASING BAC5725 PSD8-11 STRIPPING ORGANIC FINISHES BAC5725 REV F STRIPPING ORGANIC MATERIALS BAC5408 PSD6-56 VAPOR DEGREASING BAC5408 PSD6-54 VAPOR DEGREASING BAC5408 PSD6-51 VAPOR DEGREASING BAC5408 PSD6-46 VAPOR DEGREASING BDM-1598 REV A MISCELLANEOUS DESIGN BAC5751 PSD8-12 CLEANING DESCALING AND SURFACE PREPARATION O BAC5751 PSD8-11 CLEANING DESCALING AND SURFACE PREPARATION O BAC5751 PSD8-10 CLEANING DESCALING AND SURFACE PREPARATION O BAC5751 PSD8-9 CLEANING DESCALING AND SURFACE PREPARATION OF BAC5751 PSD8-8 CLEANING DESCALING AND SURFACE PREPARATION OF BAC5751 PSD8-7 CLEANING DESCALING AND SURFACE PREPARATION OF BAC5751 PSD8-6 CLEANING, DESCALING AND SURFACE PREPARATION BAC5751 PSD6-69 CLEANING DESCALING AND SURFACE PREPARATION BAC5701 PSD8-17 CADMIUM PLATING BAC5946 REV AA TEMPER INSPECTION OF ALLUMINUM ALLOYS BAC5932 REV F FUSION WELDING OF STEEL BAC5307 PSD8-24 PART MARKING Issued Date 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/10/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 7/9/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001209 PSBO-001216 PSBO-001210 PSBO-001214 PSBO-001215 PSBO-001213 PSBO-001211 PSBO-001212 PSBO-001149 PSBO-001150 PSBO-001162 PSBO-001179 PSBO-001194 PSBO-001193 PSBO-001190 PSBO-001189 PSBO-001188 PSBO-001187 PSBO-001186 PSBO-001185 PSBO-001180 PSBO-001206 PSBO-001204 PSBO-001201 PSBO-001200 PSBO-001199 PSBO-001198 PSBO-001197 PSBO-001196 PSBO-001195 PSBO-001170 PSBO-001165 PSBO-001158 PSBO-001130 PSBO-001131 PSBO-001132 PSBO-001133 PSBO-001135 PSBO-001148 PSBO-001144 PSBO-001142 PSBO-001137 PSBO-001134 PSBO-001123 PSF22-000160 PSGE-000005 PSGE-000017 PSGE-000016 PSGE-000010 PSGE-000001 PSF22-000039 PSBO-001127 PSSA-000102 PSBO-001102 PSBO-001103 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title BAC5652 PSD8-1 INSPECTION OF CASTINGS BAC5307 PSD8-23 PART MARKING BAC5307 PSD8-8 PART MARKING BAC5307 PSD8-20 PART MARKING BAC5307 PSD8-21 PART MARKING BAC5307 PSD8-17 PART MARKING BAC5307 PSD8-11 PART MARKING BAC5307 PSD8-12 PART MARKING 30M-M12883/50 SUPPLEMENT FOR 30M-MS20074 REV A SUPPLEMENT FOR BAC5001-12 PSD8-1, FORMING AND STRAIGHTENING OF DUCTS ST7M224 REV J ELBOW, TUBE-60 , SWIVEL NUT (BEAM SEAL) BAC5423 PSD8-8 PENETRANT METHODS OF INSPECTION BAC5408 REV M VAPOR DEGREASING 3M1321 REV A RIVET, SOLID, 120 FLUSH INTERFERENCE SHEAR HEAD 3M1250 REV M FASTENER-HIGH STRENGTH QUICK RELEASE TYPE C'SUN BAC5000 PSD9-46 GENERAL SEALING BAC5000 PSD9-45 GENERAL SEALING BAC5000 PSD9-44 GENERAL SEALING BAC5000 PSD9-43 GENERAL SEALING 7M160 REV G WIRE-RETAINER, SWIVEL NUT BAC5609 REV F DOW 7 TREATMENT OF MAGNESIUM ALLOYS BAC5602 REV AF HEAT TREATMENT OF ALMINUM ALLOYS BAC5436 REV G ETCH INSPECTION OF GROUND OR MACHINED STEEL PA BAC5435 PSD8-10 BEARING INSTALLATION AND RETENTION BAC5435 PSD8-9 BEARING INSTALLATION AND RETENTION BAC5424 PSD8-22 MAGNETIC PARTICLE INSPECTION BAC5424 PSD8-17 MAGNETIC PARTICLE INSPECTION BAC5423 PSD9-9 PENETRANT METHODS OF INSPECTION BAC5423 PSD8-12 PENETRANT METHODS OF INSPECTION PS17132 REV G, INTERCONNECTION, FIBER OPTIC, AIRCRAFT;INSTAL PS11205.1 INACTIVE NOTICE FOR PS 11205.1 BAC5300 PSD8-5, FORMING, STRAIGHTING, AND FITTING METAL PART BAC5004-3 PSD8-9, BLIND FASTENER INSTALLATION BAC5004-3 PSD8-10, BLIND FASTENER INSTALLATION BAC5004-3 PSD8-11, BLIND FASTENERS INSTALLATION BAC5004-1 PSD8-10, SOLID RIVET INSTALLATION BAC5004-1 PSD8-14, SOLID RIVET INSTALLATION 5M3178 REV ORG SWITCH, ROTARY, CLOSED CONSTRUCTION, SEALED BAC5009 PSD9-7 BOLT AND NUT INSTALLATION BAC5440 PSD8-1 HOLE PREPARATION, MACHINING AND GRINDING OF S BAC5009 PSD8-14, BOLT AND NUT INSTALLATION BAC5004-1 PSD8-13, SOLID RIVET INSTALLATION BAC5617 PSD8-17 HEAT TREATMENT OF ALLOY STEELS 5PTMBT02-G FABRIC, CARBON FIBER, WOVEN, EPOXY RESIN IMPREG, A50TF311-S2 CURE CORROSION INHIBITING EPOXY ADHESIVE PRIMER PT500 TACKIFIER PR520 RESIN P1TF10-S14 SHEET METAL PARTS AND FABRICATED ASSEMBLIES A50TF82-S5 EPOXY ADHESIVE PRIMER 5PTPCT02 PROCESS SPEC INSPEC, EDDY CURRENT BAC5004-2 PSD8-12, PERMANANT STRAIGHT SHANK FASTENER INSTAL SS9581 REV 6 AMD 1, FIBER LAMINATED PRODUCTS, SURFACE FINISH ST7M402 REV J UNION- WELDING, CRES TUBE 7M1163 REV B RESTRICTOR, FLUID FLOW-ONE WAY Issued Date 7/9/2008 7/9/2008 7/8/2008 7/8/2008 7/8/2008 7/8/2008 7/8/2008 7/8/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/3/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/2/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 7/1/2008 6/25/2008 6/20/2008 6/20/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001116 PSBO-001118 PSBO-001120 PSSA-000107 PSF22-000208 PSF22-000207 PSF22-000206 PSBO-001119 PSBO-001099 PSBO-000386 PSBO-001098 PSF22-000205 PSBO-000022 PSBO-001087 PSBO-001091 PSBO-001094 PSBO-001093 PSBO-001090 PSBO-001084 PSBO-000520 PSBO-001081 PSBO-001082 PSBO-000197 PSBO-000370 PSF22-000204 PSF22-000041 PSBO-001080 PSBO-001077 PSSA-000103 PSBO-000470 PSF22-000012 PSBO-000094 PSBO-000378 PSBO-001069 PSBO-001072 PSBO-001065 PSBO-001067 PSF22-000199 PSF22-000201 PSF22-000200 PSBO-001055 PSBO-001056 PSBO-001064 PSBO-001059 PSBO-000102 PSBO-001044 PSBO-001050 PSBO-001047 PSBO-001049 PSBO-001042 PSBO-001040 PSBO-001039 PSBO-001031 PSBO-001034 PSBO-001033 Rev. A A A A A A A A A B A A D A A A A A A C A A F B A G A A A B D B D A A A A A A A A A A A B A A A A A B A A A A Title PS17002 REV U CONTROL SYSTEMS, AIRCRAFT; INSTALLATION OF PS21235 REV N ENVIROMENTAL CONTROL SYSTEM PRESSURE TESTING O 30M-MS24694 REV A; MS24694, BOEING-ST. LOUIS SUPPLEMENT FOR DESKTOP FLIGHT SAFETY 5PTPCL07 GENERAL REQUIREMENTS FOR ULTRASONIC INSPECTION 5PTPCL06 GENERAL REQUIREMENTS FOR RADIOGRAPHIC INSPECTION LMA-PY001 REV A COMPOSITE FABRICATION FACILITY PS21266 REV D ELECTROMAGNETIC TESTING- GENERAL DPS4.710-3 REV AK GENERAL FABRICATION PRACTICES ?] CO MMS5030 REV E - BINDERIZED FABRIC MMS5049 REV A CARBON FIBER PLAIN WEAVE FABRIC REINFORCED TOU LMA-PH016 CONVERSION COATING OF TITAMIUM ALLOYS PS11308 REV AA - BONDING WITH EPOXY ADHESIVES MMS358 ADD 1 REV F APPROVED MMS358 MATERIAL SOURCES PS17138 REV P SWAGE FITTINGS, SIERRACIN/HARRISON PS19409.1 REV C AUTOMATIC DRILLING AND FASTENING EQUIPMENT PS17170 REV AA CONNECTORS, ELEC, WATERPROOFING FOR TEMP PS13518 REV F APPLICATION OF POLYSULFIDE TO TRANSPARENCY EDG 30M-MS20913 SUPPLEMENT FOR MS20913 PS14164 REV L INTERNALLY SWAGED METRIC TUBING END FITTINGS 4M363 REV D BEARING, PLAIN - SELF-ALIGNING, FLANGE RACE 9M937 REV E CASE-COMBINATION, ALUMINUM ALLOY, FOUR LATCH PS19115 REV P - INSTALLATION OF TUBULAR RIVETS MMS443 REV F - ELASTOMERIC MATERIAL, CORROSION RESISTANT 5PTPLL13-D-A02 MACHINING OF NON-METALLIC CORE 5PTPCT05-C-V02 PROCESS SPEC INSPECTION, ACCEPTANCE CRI 30M-AS4863 SUPPLMENT FOR 5M2426 REV L CONNECTOR ACCESSORIES-COVER, RECEPTACLE SS9309 REV 2, PRPROCESS AREAS, COMP AND STRUCTURAL ADHESIVE DPS7.00-1-17 REV K - GKN DEV, ALUM HEAT TREAT PROCEDURES 5PTMBT12-B MATERIAL SPEC FABRIC, CARBON FIBER, WOVEN PS14194 REV D - SANDWICH STRUCTURE, INTERIOR NONACOUSTICAL, MMS5026 REV G - TOUGHENED EPOXY IMPREGNATED FIBER GLASS CLOT DPS4.50-33 REV J PRETREATMENT COATING DMS 1879 REV E TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AI-6 5M1972 REV AC CONNECTOR, ELECTRICAL, RECTANGULAR-PLUG. EMI P 5M3156 REV C CONNECTOR, ELECTRICAL, RECTANGULAR-PLUG, EMI PR LMA-PA051A CHEMICAL MILLING OF METALS LMA-ML006 BISMALEIMIDE RESIN AND TACKIFIER FOR RESIN TRANSFE LMA-MB012 FABRIC, CARBON FIBER, WOVEN, BISMALEMIDE RESIN TAC 6M297- PLATE, IDENTIFICATION-UNIQUE IDENTIFICATION (UID) 9M973 REV D-MOUNT, VIBRATION-ISOLATOR, HEAVY-LOAD 30M-MS24404 - MS24404, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AS5168 REV A -AS5168, BOEING-ST. LOUIS SUPPLEMENT FOR PS14247 REV G - CARBON FIBER BISMALEIMIDE LAMINATES, FABRICA 5M2251 REV J CONTACTS-ELECTRICAL, CONNECTOR, TRAX 30M-AS5172 BOEING - STLOUIS SUPPLEMENT FOR AS5172 30M-AN784 AN784, BOEING - ST.LOUIS SUPPLEMENT FOR 30M-AS1032 BOEING - STLOUIS SUPPLEMENT FOR AS1032 DPS4.50-160 REV G, COATING, NONSKID-FLUID RESISTANT D6-1276 REV P CONTROL OF MATERIAL AND PROCESSES DESIGNATED ST7M400 REV F; ADAPTER STRAIGHT TUBE TO BOSS-FLUID CONNECTIO 3M1094 REV E EYEBOLT ASSEMBLY, ENGINE MOUNT 7M1253 REV A ELBOW, TUBE - 45 DEGREE, SWIVEL NUT ENDS, B, 4M264 REV G WASHER - C'SUNK, TITANIUM, REPAIR Issued Date 6/20/2008 6/20/2008 6/20/2008 6/20/2008 6/20/2008 6/20/2008 6/20/2008 6/20/2008 6/18/2008 6/17/2008 6/17/2008 6/12/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/4/2008 6/3/2008 6/3/2008 6/3/2008 6/3/2008 6/3/2008 5/21/2008 4/22/2008 3/31/2008 3/26/2008 3/25/2008 3/7/2008 3/7/2008 3/5/2008 3/5/2008 2/27/2008 2/27/2008 2/27/2008 2/20/2008 2/20/2008 2/20/2008 2/20/2008 2/11/2008 2/7/2008 2/7/2008 2/7/2008 2/7/2008 2/5/2008 2/1/2008 1/30/2008 1/24/2008 1/24/2008 1/24/2008 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-001032 PSF22-000195 PSBO-001026 PSBO-001028 PSBO-001015 PSBO-001021 PSBO-001023 PSBO-001022 PSBO-001020 PSBO-001017 PSBO-001019 PSF22-000058 PSGE-000004 PSBO-001012 PSBO-000362 PSBO-001002 PSBO-001010 PSBO-001009 PSBO-001005 PSBO-001006 PSBO-001008 PSBO-000999 PSBO-000985 PSBO-000992 PSBO-000978 PSBO-000983 PSBO-000980 PSBO-000981 PSBO-000982 PSBO-000965 PSBO-000968 PSBO-000974 PSBO-000972 PSBO-000966 PSBO-000910 PSBO-000911 PSBO-000912 PSBO-000886 PSBO-000887 PSBO-000888 PSBO-000902 PSBO-000901 PSBO-000900 PSBO-000899 PSBO-000898 PSBO-000897 PSBO-000896 PSBO-000895 PSBO-000894 PSBO-000893 PSBO-000892 PSBO-000891 PSBO-000890 PSF22-000187 PSF22-000189 Rev. A A A A A A A A A A A D C A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title 3M1330 REV - ROD, CONTINUOUS THREAD - CRES AP8117 REV AD UNION - TUBE WELD PS14017 DEV 3 REV V PS14250 REV C LOW TEMP CURE EPOXY LAMINATES AND SANDWICH STR ST3M39 REV Y PIN-FLAT HEAD, HIGH TEMPERATURE 30M-AS9486 SUPPLEMENT FOR 30M-MS20253 REV A SUPPLEMENT FOR 30M-AS20253 SUPPLEMENT FOR 30M-AS9105 SUPPLEMENT FOR 30M-AN783 REV A SUPPLEMENT FOR 30M-AS1031 SUPPLEMENT FOR 5PTPKL16-H-A07 PROCESS SPEC NON STRUCTURAL ADHESIVE, APPLIC A50TF304-S3 ONE PART EPOXY RESIN PS21336 REV C REC INSP PROCEDURES FOR BISMALEIMIDE COMP MATE MMS310 REV F - FILM ADHESIVE, HIGH TEMPERATURE ST4M212 REV F, BEARING, PLAIN, SELF-LUBRICATING, SELF ALIGNI 30M-AS81820/4, BOEING ST. LOUIS SUPPLEMENT FOR 30M-AS5587; AS5587 BOEING ST. LOUIS SUPPLEMENT FOR 30M-AN742 REV A, AN742, BOEING- ST. LOUIS SUPPLEMENT FOR 30M-AN941 REV A, AN941, BOEING ST. LOUIS SUPPLEMENT FOR 30M-AS5191; AS5198, BOEING-ST. LOUIS SUPPLEMENT FOR 30M-NA0114 REV B, NA0114, CAGE 80205, BOEING-ST. LOUIS SUPPL 1MA10231REV A ALUMINUM ALLOY SPECIAL SHAPED SECTION- EXTRUDE PS12050.9 REV E PICKLING BERYLLIUM PS20022.1 REV M CHEMICAL MILLING OF ALUMINUM ALLOYS 30M-AS5192, AS5192-BOEING ST. LOUIS SUPPLEMENT FOR 30M-AN939 REV A, AN839 BOEING-ST. LOUIS SUPPLEMENT FOR 30M-AN938 REV A AN938, BOEING ST. LOUIS SUPPLEMENT FOR 30M-AS5190, AS5190 BOEING-ST. LOUIS SUPPLEMENT FOR 1MT300 REV M TITANIUM ALLOY ANGLE- EXTRUDED 30M-NAS1831 SUPPLEMENT FOR ST5M1654 REV AF SWITCH, PLUNGER, 2PDT, LOW LEVEL TO 5 AMP, E PS14074 REV K TUBING-POLYAMIDE; FABRICATION, INSTALLATION, S 3M155 REV N NUT-BARREL, 180 KSI, SELF-LOCKING AND NON-LOCKIN HMS6-1121 EO REV K AMD 1 ELECTROSLAG REFINED 4340 STEEL HMS6-1121 EO REV K ELECTROSLAG REFINED 4340 STEEL HMS6-1121 REV K ELECTROSLAG REFINED 4340 STEEL 3M1259 REV E PIN-RIVET, FLUTED THREADS-TENSION, PROTRUDING H 3M1247 REV G PIN-RIVET, FLUTED THREADS- SHEAR, PROTRUDING HE 3M1248 REV H PIN-RIVET, FLUTED THREADS- TENSION, PROTRUDING MMS5035 REV C, MOLDING COMPOUND, EPOXY RESIN, GLASS FIBER R MMS439 ADDENDUM 1 REV E APPROVED MATERIAL SOURCES MMS439 REV G POLYURETHANE ELASTOMER PS17177 REV H WATERPROOFING OF ELEC CON FOR OPER TEMP UP 400 PS17177 PERM F-15 SUP 1 WATERPROOFING OF ELECTRICAL CONN FOR PS21097 REV D PYLON FUEL AND FIRE EXTINGUISHER SYSTEMS, C-17 3M1258 REV D PIN-RIVET, FLUTED THREADS-TENSION, PROTRUDING H 3M1257 REV D PIN RIVET, FLUTED THREADS-SHEAR, PROTRUDING HEA 3M1256 REV D PIN-RIVET, FLUTED THREADS-SHEAR, PROTRUDING HEA 3M1255 REV H PIN-RIVET, FLUTED THREADS-SHEAR, 100 C'SUNK HEX 3M1254 REV F PIN-RIVET, FLUTED THREADS-SHEAR, 100 C'SUNK HEX 3M1253 REV F PIN-RIVET, FLUTED THREADS-TENSION, 100 C'SUNK H 3M1252 REV F PIN-RIVET, FLUTED THREADS-TENSION, 100 C'SUNK, 5PTC1001 REV D SHIM LAMINATED 5PTC5503 REV D NUT, MUTI-LOBED-HYDRAULIC BULKHEAD FITTING Issued Date 1/24/2008 1/24/2008 1/18/2008 1/18/2008 1/17/2008 1/17/2008 1/17/2008 1/17/2008 1/17/2008 1/17/2008 1/17/2008 1/14/2008 1/8/2008 1/7/2008 1/3/2008 12/28/2007 12/28/2007 12/28/2007 12/28/2007 12/28/2007 12/28/2007 12/17/2007 11/29/2007 11/29/2007 11/21/2007 11/21/2007 11/21/2007 11/21/2007 11/21/2007 11/16/2007 11/16/2007 11/16/2007 11/16/2007 11/16/2007 11/12/2007 11/12/2007 11/12/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 11/2/2007 10/29/2007 10/29/2007 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSF22-000191 PSF22-000192 PSF22-000190 PSBO-000287 PSBO-000884 PSBO-000880 PSBO-000881 PSBO-000883 PSBO-000882 PSBO-000660 PSBO-000487 PSBO-000875 PSBO-000873 PSBO-000871 PSF22-000022 PSF22-000026 PSF22-000033 PSF22-000006 PSF22-000083 PSF22-000165 PSF22-000172 PSF22-000173 PSF22-000176 PSF22-000174 PSF22-000168 PSF22-000171 PSBO-000282 PSBO-000737 PSBO-000741 PSBO-000848 PSBO-000738 PSBO-000740 PSBOM-000003 PSBO-000857 PSF22-000164 PSBO-000005 PSBO-000847 PSBO-000846 PSBO-000843 PSBO-000841 PSBO-000840 PSBO-000837 PSBO-000223 PSBO-000688 PSBO-000833 PSBO-000830 PSBO-000453 PSBO-000801 PSBO-000804 PSBO-000806 PSBO-000808 PSBO-000817 PSBO-000823 PSBO-000822 PSBO-000821 Rev. A A A C A A A A A B B A A A B C C B B A A A A A A A B A A A A A A A A D A A A A A A C B A A C A A A A A A A A Title 5PTMEG21-A01 SYNTHETIC RUBBER SHEET 5PTMYA01-A02 AUTHORIZED NON-METALLIC MATERIAL SUBS FOR THE F 5PTD4550 REV F MICROCIRCUIT, LEAD FORMING, SURFACE MOUNTED C PS21233 REV K - NONDESTRUCTIVE TESTING OF HONEYCOMB ASSY'S A PS21266.8 REV - ELECTROMAGNETIC TESTING - WAVEGUIDE TRANSMIS PS21233 REV K SUPP 1 AV-8 PS21233 REV K SUPP 1 F-15 PS21233 REV K SUPP 1 T-45 PS21233 REV K SUPP 1 F-18 PS11201 REV T SEALING, FUME AND FOREIGN OBJECT DAMAGE DPS7.00-1 REV BL ALUMINUM HEAT TREATMENT PROCEDURES ST7M362 REV E GAUGE, PRESSURE- DIAL INDICATING, 0-5000 PSI PS14290 REV T COMPOSITE AND BONDING CURE CYCLE PROCEDURES PS21273 REV A NONDESTRUCTIVE OF PRE-EMD COMP PARTS AND BONDE 5PTMGG15-C GLASS CLOTH 5PTMLG00-C TWO PART EPOXY ADHESIVES FOR USE IN STRUCTURAL 5PTMLT07-B MATERIAL SPEC BISMALEIMIDE FILM ADHESIVE 5PTMAT08-A MATERIAL SPEC TAPE, CARBON FIBER EPOXY RESIN IM 5PTMLT09-B-A01 RESIN TRANSFER MOLDED MATERIALS 5PTC1088 REV - BOLT, SPECIAL 5PTPBG16B INSTALLATION PROCEDURE FOR RADIUS BLOCKS 5PTPHL20-D CHEMICAL FILM TREATMENT, NONIMMERSION, FOR ALUM A 5PTPRT06-A-A01 INPROCESS ELECTRICAL TESTING 5PTPKL02-B-A02 PROCESS FOR ADHESIVE BONDING AND CO-BONDING 5PTMRL04-L-A02 SILVER PAINT 5PTPBG15-A03-B INSTALLATION PROCEDURE FOR CLAMPS PS21207 REV G - EDDY CURRENT DETERMINATION OF ELECTRICAL CON BAC5750 PSD9-41 SOLVENT CLEANING BAC5763 PSD6-51 EMULSION CLEANING AND AQUEOUS DEGREASING DMS 2201 REV H PROCUREMENT FROM FOREIGN SOURCES- METALLIC RA BAC5763 PSD6-47 EMULSION CLEANING AND AQUEOUS DEGREASING BAC5763 PSD6-49 EMULSION CLEANING AND AQUEOUS DEGREASING HP6-35 REV G HEAT-TREAT TEMPER INSPECTION OF ALIM ALLOYS 7M1263 REV A COUPLING HALF, QUICK DISCONNECT, SELF SEALING 5PTC1004 REV P PLATE, INDENTIFICATION PS11002.1 REV P - NAMEPLATES, METAL, EXTERIOR; APPLICATION 30M-NAS1728 REV A SUPPLEMENT FOR NAS1728 30M-NAS1724 REV B SUPPLEMENT FOR NAS1724 30M-NAS424 REV - SUPPLEMENT FOR NAS424 30M-AS5355/3 REV A SUPPLEMENT FOR AS5355/3 30M-AS3582 REV A SUPPLEMENT FOR AS3582 9M281 REV D CLAMP-TUBE GRIP SUPPORT PS20006 REV R - SHEET METAL AND EXTRUSIONS, REQUIREMENTS AND PS21241.6 REV A HELIUM LEAK LOCATION TESTING ST7M175 REV A RING - BACKUP, O-RING STATIC FACE SEAL 5M3166 REV - CABLE, ELEC, MUTICONDUCTOR DBLE SHIELD DBLE JKT DMS2224 REV P - CARBON EPOXY PREPREG - IMPACT RESISTANT DMS2378 REV A TAPE, CLOSURE, HOOK AND LOOP, STAINLESS STEEL DMS 2100 REV G STEEL, CORROSION RESISTANT, PH 13-8MO DMS 2153 REV F COMPONENT ID LABELS- PRESSURE SENSITIVE ADHE DMS2234 REV A ALUMINUM ALLOY, SHEET, CLAD, 7475 DPS3.67-71 REV C INSTALLATION OF NAS93XX SERIES BLIND DPS9.84 REV L THIN DENSE CHROMIUM PLATE DPS5.00-1 REV AU STEEL HEAT TREATMENT-QUENCH AND TEMPE DPS5.00-7 REV E STEEL HEAT TREATMENT-STAINLESS STRAI Issued Date 10/29/2007 10/29/2007 10/29/2007 10/24/2007 10/24/2007 10/24/2007 10/24/2007 10/24/2007 10/24/2007 10/24/2007 9/14/2007 9/14/2007 9/7/2007 8/24/2007 8/8/2007 8/8/2007 8/8/2007 8/6/2007 8/6/2007 7/23/2007 7/23/2007 7/23/2007 7/23/2007 7/23/2007 7/23/2007 7/23/2007 7/13/2007 7/12/2007 7/12/2007 7/12/2007 7/12/2007 7/12/2007 6/20/2007 6/14/2007 5/18/2007 4/26/2007 4/26/2007 4/26/2007 4/26/2007 4/26/2007 4/26/2007 4/26/2007 4/5/2007 4/5/2007 4/5/2007 4/5/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000809 PSBO-000807 PSBO-000805 PSBO-000803 PSBO-000800 PSBO-000799 PSBO-000788 PSF22-000154 PSF22-000124 PSF22-000141 PSF22-000143 PSF22-000146 PSF22-000142 PSF22-000140 PSF22-000127 PSF22-000128 PSBO-000779 PSBO-000782 PSBO-000784 PSBO-000765 PSBO-000711 PSBO-000724 PSBO-000743 PSBO-000748 PSBO-000750 PSBO-000758 PSBO-000757 PSBO-000753 PSBO-000749 PSBO-000745 PSBO-000734 PSBO-000718 PSBO-000715 PSBO-000717 PSBO-000716 PSBO-000409 PSBO-000666 PSBO-000113 PSBO-000236 PSBO-000305 PSBO-000185 PSBO-000215 PSBO-000306 PSBO-000317 PSBO-000316 PSBO-000011 PSBO-000013 PSBO-000020 PSBO-000030 PSBO-000057 PSBO-000064 PSBO-000072 PSBO-000356 PSBO-000126 PSBO-000077 Rev. A A A A A A A A B A A A A A A A A A A A A A A A A A A A A A A A A A A B B B C C B B C C C C C C C C C C B B D Title DMS2237 REV - MULTI-DMS AMENDMENT DMS2233 REV G PLATE, ALUMINUM ALLOY, 7050 DMS 2142 REV E TUBING, WIRE MARKER DMS1721 REV J CASTINGS, ALUMINUM ALLOY, A357.0-T6 DMS2227 REV J EXTRUSIONS, ALUMINUM ALLOY, 7050 DMS2084 REV C CLOTH, GLASS, COATED ELASTOMER 30M-NAS1397 BOEING-ST.LOUIS SUPPLEMENT FOR NAS 1397 5HY03303 CRITERIA, SURFACE WAVINESS (U) 5PTMBT01-H, FABRIC. CARBON FIBER, WOVEN, BISMALEIMIDE, RE 5PTPCL14-B INSPECTION, ULTRASONIC PROCEDURE FOR EMBEDDED COR 5PTPHL21-A PHOSPHORIC ACID ANODIZING OF ALUMINUM AND ALUMINU 5PTPKL20-F-A02 ADHESIVE BONDING OF FASTENER HEAD WASHERS 5PTMUG49A GENERAL PURPOSE ADHESIVES, POLSULFIDE RUBBER BASE 5PD00845-E F/A-22 COMPOSITE PARTS SUPPLIER QUALIFICATION PLA 5PTMLL09-D ADHESIVE, EPOXY FILM 250 DEGREE F CURE 5PTPNG02A APP PROC FOR F22 TUBE MARKING TAPES PS17149 REV J ADAPTERS, ROSAN, FLUID SYSTEM, INSTALLATION OF PS17180 REV K BUSHINGS, ELECTRICAL; SEALING FOR TEMPS UP TO PS21341 REV M WIRE, ELECTRICAL , FOR USE ON BOEING-ST.LOUIS; D37520-1A REV J, SUPPLIERS' PART PROTECT GUIDE - GEN PACKAGI BAC5750 PSD6-64 SOLVENT CLEANING BAC5750 PSD6-74 SOLVENT CLEANING BAC5034-2 PSD9-6 TEMPORARY PROTECTION OF PROD. MATERIALS, PA BAC5763 PSD6-53 EMULSION CLEANING AND AQUEOUS DEGREASING BAC5763 PSD6-55 EMULSION CLEANING AND AQUEOUS DEGREASING BSS7039 PSD6-5, LIQUID PENETRANT INSPECTION BSS7039 PSD6-4, LIQUID PENETRANT INSPECTION BAC5357 REV A APPLICATION OF NON-CHROMATED INTEGRAL FUEL TAN BAC5763 PSD6-54 EMULSION CLEANING AND AQUEOUS DEGREASING BAC5034-2 PSD9-5 TEMPORARY PROTECTION OF PROD. MATERIALS, PA BAC5750 PSD9-38 SOLVENT CLEANING BAC5034-3 PSD6-6 TEMPORARY PROTECTION OF PRODUCTION MATERIAL BAC5435 PSD9-18 BEARING INSTALLATION AND RETENTION BAC5034-3 PSD6-4 TEMPORARY PROTECTION OF PRODUCTION MATERIAL BAC5435 PSD9-16 BEARING INSTALLATION AND RETENTION MMS714 REV F - CORE MATERIAL, CORROSION RESISTANT ALUMINUM H 5M3160 REV B SWITCH, PUSHBUTTON, ILLUMINATED/ NON-ILLUMINATE PS15000 REV V - GENERAL HEAT TREATING CRITERIA FOR FERROUS M PS20401 REV E - MARKING LAYOUT ON METALS PS21335.2 REV C - PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI PS17034 REV L - BUSHINGS, INSTALLATION PS19429 REV E - CLIP-ON NUTS, INSTALLATION PS21335.3 REV C - PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI PS21335.14 REV E - PHYSIOCHEMICAL TEST METHODS: RHEOMETRIC M PS21335.13 REV C - PHYSIOCHEMICAL TEST METHODS: METHODS FOR PS11016 REV K - CEMENTING LAMINATED PLASTICS (DPS 1.07-39) PS14034.1 REV K - LAMINATES, REINFORCED PLASTIC, FABRICATION PS11242 REV D - TOLERANCE REQUIREMENTS FOR BOND DETAILS PS12024 REV G - CLEANING, AQUEOUS IMMERSION DEGREASING PS13507 REV H - APPLICATION OF MOISTURE AND FUNGUS RESISTANT PS13560 REV G - HEAT RESISTANT URETHANE COATING (DOUGLAS COM PS14007 REV AB - FORMING ALUMINUM ALLOY WROUGHT PRODUCTS MMS1439 REV E - ALUMINUM ALLOY PLATE, 7050-T7451, FATIGUE TE PS15000.14 REV D- HARDENING PH GRADE STAINLESS STEELS TO TH PS14030 REV H - HONEYCOMB SANDWICH ASSEMBLIES, ALUMINUM, EDG Issued Date 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/19/2007 2/9/2007 2/9/2007 2/1/2007 2/1/2007 2/1/2007 2/1/2007 2/1/2007 2/1/2007 2/1/2007 2/1/2007 1/30/2007 1/30/2007 1/30/2007 1/15/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 1/12/2007 11/14/2006 11/14/2006 11/13/2006 11/13/2006 11/13/2006 11/13/2006 11/13/2006 11/13/2006 11/13/2006 11/13/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000065 PSBO-000063 PSBO-000056 PSBO-000027 PSBO-000039 PSBO-000395 PSBO-000399 PSBO-000543 PSBO-000397 PSBO-000668 PSBO-000675 PSBO-000690 PSBO-000691 PSBO-000677 PSBO-000670 PSBO-000661 PSBO-000547 PSBO-000556 PSBO-000559 PSBO-000563 PSBO-000605 PSBO-000588 PSBO-000583 PSBO-000582 PSBO-000581 PSBO-000580 PSBO-000579 PSBO-000576 PSBO-000575 PSBO-000634 PSBO-000633 PSBO-000632 PSBO-000630 PSBO-000629 PSBO-000625 PSBO-000606 PSBO-000574 PSBO-000573 PSBO-000570 PSBO-000569 PSBO-000568 PSBO-000567 PSBO-000565 PSBO-000564 PSBO-000561 PSBO-000558 PSBO-000552 PSBO-000548 PSBO-000549 PSBO-000551 PSF22-000139 PSF22-000137 PSBO-000009 PSBO-000045 PSGE-000002 Rev. C C C C C B B A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B A Title PS13607 REV R - SEALING, CORROSION PROTECTION OF EXTERIOR JO PS13555 REV W - COATING, ANTI-CHAFE PS13457 REV D - PLASTIC PREPARATION FOR FILLERS OR FINISHES, PS12010 REV U - CLEANING, SOLVENT, HAND OR IMMERSION PS12050.2 REV D - PICKLING COPPER AND BRASS ALLOYS MMS529 REV K - EPOXY IMPREGNATED FIBER GLASS CLOTH MMS534 REV J - CARBON FIBER BISMALEIMIDE CLOTH PREPREG DMS2094 REV D HONEYCOMB CORE: FIBERGLASS REINFORCED PLASTIC MMS533 REV F - FIBER GLASS BISMALEIMIDE PREPREG, CORROSION B 7M891 REV F DISCONNECT, FUEL - WING AND PYLON 30M-AN416 AN416, BOEING-STLOUIS SUPPLEMENT FOR ST9M594 REV J BALL SEGMENT-LINE SUPPORT BLOCK ST9M597 REV AT CASE - COMBINATION, ALUMINUM K9M4 REV D CLAMP, LOOP STYLE, CUSHIONED, METRIC, SPECIAL 9M640 REV G CASE COMPONENTS-COMBINATION PS20005 REV B PRECAUTIONS IN USING LIQUIDS ON AIRCRAFT AND A BAC5753 PSD6-114 CLEANING, DESCALING & SURFACE PREPARATION BAC5753 PSD6-136 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-140 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-147 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5423 PSD6-155 PENETRANT METHODS OF INSPECTION BAC5435 PSD6-50 BEARING INSTALLATION AND RETENTION BAC5613 PSD6-44 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLO BAC5625 PSD6-42 SURFACE TREATMENTS FOR FERROUS ALLOYS BAC5625 PSD6-40 SURFACE TREATMENTS FOR FERROUS ALLOYS BAC5613 PSD6-39 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLO BAC5613 PSD6-29 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLO BAC5928 PSD6-8 THERMAL CUTTING OF METALS BAC5928 PSD6-6 THERMAL CUTTING OF METALS BAC5982 REV B, LASER CUTTING OF METAL BAC5969 REV E, ELECTRICAL DISCHARGE MACHINING BAC5928 REV K, THERMAL CUTTING OF METALS BAC5625 REV E, SURFACE TREATMENTS FOR FERROUS ALLOYS BAC5619 REV H, HEAT TREATMENT OF CORROSION RESISTANT STEEL BAC5424 REV U, MAGNETIC PARTICLE INSPECTION BAC5423 PSD6-156 PENETRANT INSPECTION BAC5969 PSD6-5 ELECTRICAL DISCHARGE MACHINING BAC5982 PSD6-3 , LASER CUTTING OF METAL BAC5753 PSD9-64 CLEANING, DESCALING, AND SURFACE PREPARATION BAC5753 PSD9-62 CLEANING, DESCALING, AND SURFACE PREPARATION BAC5753 PSD9-61 CLEANING, DESCALING, AND SURFACE PREPARATION BAC5753 PSD9-51 CLEANING, DESCALING, AND SURFACE PREPARATION BAC5753 PSD6-149 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-148 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-145 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-138 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-119 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-88 CLEANING, DESCALING, AND SURFACE PREPARATI BAC5753 PSD6-97 CLEANING, DESCALING, AND SURFACE PREPARATIO BAC5753 PSD6-116 CLEANING, DESCALING, AND SURFACE PREPARATIO 5PTMLL03-QPL-1 5PTPAG91 REV C. SURFACE ROUGHNESS AND TOLERANCES FOR MACHINE PS11010 REV J - CEMENTING SILICONE AND FLUOROSILICONE RUBBER PS12100 REV N - STRIPPING ORGANIC COATINGS; BRUSH OR SPRAY A A50TF197-S4 LOW TEMPERATURE CURING STRUCTURAL ADHESIVE FILM Issued Date 11/10/2006 11/10/2006 11/10/2006 11/10/2006 11/10/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 10/24/2006 9/28/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 9/12/2006 8/2/2006 7/28/2006 5/19/2006 5/19/2006 5/19/2006 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSF22-000134 A PSBO-000166 B PSBO-000532 A PSBO-000538 A PSBO-000496 A PSBO-000524 A PSBO-000529 A PSBO-000525 A PSBO-000498 A PSBO-000499 A PSBO-000506 A PSBO-000517 A PSBO-000519 A PSBO-000515 A PSBO-000500 A PSBO-000489 A PSF22-000075 B GMS-ADHE-0002 A PSF22-000132 A PSNG-000071 A PSNG-000072 A PSF22-000125 A PSNG-000069 A PSF22-000008 C PSBO-000486 A PSF22-000077 C PSGE-000018 A PSF22-000073 B PSF22-000079 B PSF22-000126 A GMS TEMPLATE A GPS-IDNT-0001 A GMS-ADHE-0003 B PSF22-000116 A PSNG-000054 A PSSA-000094 A PSNG-000056 A GMS-COMP-0005C PSBO-000044 B PSBO-000105 B PSF22-000112 A PSBO-000484 A PSF22-000078 A PSF22-000096 A PSF22-000099 A PSF22-000084 A PSF22-000082 A PSF22-000102 A PSF22-000105 A PSF22-000114 A PSF22-000111 A PSF22-000110 A PSF22-000109 A PSF22-000108 A PSF22-000106 A Title 5PTMLL11-B-A01 ADHESIVE, EPOXY PASTE, TWO PART PS15800 REV F DEV 4 - GENERAL HEAT TREATING CRITERIA FOR TI BAC5019 PSD8-6 CHROMIC ACID ANODIZING BAC5423 REV W PENETRANT METHODS OF INSPECTION PS21212 REV F HARDNESS INSPECTION OF METALS PS13155 REV G COATING, PROTECTION OF STEEL AND TITANIUM DURI PS13550 REV D INACTIVE SPECIFICATION PRIMER, EPOXY (FR), APP PS13202 REV R COATING, COLORLESS CHEMICAL SURFACE TREATMENT PS22155 REV D RESISTANCE WELDING OF STAINLESS STEEL WIRE MES PS17146.2 REV E GAMAH COUPLINGS, FABRICATION AND INSTALLATIO PS23071 REV D FUSION WELDING- QA STANDARDS PS14009 REV G SIZING OF METAL TUBE ENDS PS14015 REV B TUBING, POLYETHYLENE, FABRICATION AND HANDLING PS17144 REV D END FITTINGS, FLUID SYSTEMS; WELDING OF PS22202 REV D INDEX OF FUSION WELDING SPECIFICATIONS PS22200 REV C - WELDING SYMBOLS FOR FUSION WELDING 5PTPTT02-E-V06 GENERAL SPEC FOR CONTROL OF F/D CRITIC MATERIAL SPECIFICATION RTM6 EPOXY RESIN ATTACHMENT 5PTMDL16-A CORE, HONEYCOMB, CARBON FIBER, POLYIMIDE RESIN STF1001 REV E, FINISH INSTRUCTION STF1003 REV H, FINISH INSTRUCTION 5PTMBT01-QPL-2 QUALIFIED PRODUCTS LIST FOR 5PTMBT01 PS21206.1 REV D RADIOGRAPHIC INSP OF METALLIC HOENYCOMB ASSY 5PTMBT04-D MATERIAL SPEC PREPREG, S-2 GLASS FABRIC, WOVEN DMS 2368 ADHESIVE, MODIFIED PHENOLIC, LOW HEAT RELEASE 5PTPTT12-B-V04 WIND SWEPT SURFACE PARTS GENERAL SPEC FOR CON E50TF536_S1 TEST METHOD FOR THE DETERMINATION OF THE GLASS T 5PTPPL01-C-A01 COMPOSITE FABRICATION FACILITY 5PTMCT02-D FIBER, SILICON CARBIDE 5PTMLL07-D ADHESIVE, EPOXY FILM, 350 DEG F CURE GMS TEMPLATE DOT PEEN MARKING OF METAL PARTS MATERIAL SPECIFICATION HPO3 BINDER 5PTPCL02-D-A01 PENETRANT INSPECTION, GENERAL REQUIREMENTS FO STF1758 REV E FINISH INSTRUCTION SS9638 PERFORATED COPPER FOILS AND STAINLESS STEEL AND CLOTH PS14123 REV G, SAND MATERIAL, HONEY CORE, FIBER GLASS OR KE MATERIAL SPECIFICATION WOVEN GRAPHITE FABRIC PS12090 REV G - CLEANING - REMOVAL OF IDENTIFICATION INKS AN PS14288 REV E - ROTOMOLDING OF NYLON MATERIALS 5PTPLL29-A Z-PINNING OF TACKIFIED FABRIC PREFORMS FOR RTM PS22222 REV D QUALIFICATION OF FUSION WELDERS AND WELDING 5PD00334 QUALIFICATION PLAN TO QUALIFY RTM VENDORS FOR 5PTPGG01A, REQ FOR ETCH/CLEANING PRIOR TO PENETRANT INSP 5PTPKL07-A-V03 FABRICATION AND ACCEPTANCE OF F-22 HOR STAB 5PTMNG04A GENERAL PURPOSE SOLVENT 5PTMNL15-A-A01 CLEANER, PRE-PAINT CLEANING LOW VAPOR PRESSUR 5PTPLB09 BONDED REPAIR PROCEDURES FOR CARBON/BMI COMP 5PTPLT03-A FABRICATION OF COMPOSITES, THERMOPLASTIC 5PTPTT08-A-A01 ADHESIVES AND HONEYCOMB SANDWICH, STANDARD TE 5PTPDL06-D HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS 5PTPAL11-A PROCESSING OF TITANIUM AND TITANIUM ALLOY STRUCTU 5PTPAL10-A FABRICATION OF TITANIUM AND TITANIUM ALLOYS 5PTC1301 REV N/C PREFORM, Z-PIN 5PTPPL02-A HAZARDOUS MATERIALS REDUCTION Issued Date 5/19/2006 5/19/2006 5/5/2006 5/5/2006 5/1/2006 4/27/2006 4/27/2006 4/27/2006 4/26/2006 4/26/2006 4/26/2006 4/26/2006 4/26/2006 4/26/2006 4/26/2006 4/17/2006 3/27/2006 3/27/2006 3/27/2006 3/27/2006 3/27/2006 2/6/2006 2/6/2006 1/19/2006 1/3/2006 1/3/2006 1/3/2006 1/3/2006 10/26/2005 10/26/2005 10/26/2005 10/12/2005 10/11/2005 10/3/2005 10/3/2005 10/3/2005 10/3/2005 7/18/2005 7/5/2005 7/5/2005 7/5/2005 6/28/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 6/23/2005 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. Rev. PSF22-000103 A PSGE-000003 B PSPW-000046 GMS-COMP-0006A PSBO-000479 A PSNG-000004 A PSNG-000008 A PSNG-000007 A PSNG-000005 A PSNG-000009 A PSNG-000013 A PSNG-000035 A PSNG-000043 A PSNG-000042 A PSNG-000019 A PSNG-000010 A GPS-SHOP-0007 A GPS-SHOP-0007 A PSBO-000031 C PSBO-000384 B PSBO-000191 B PSBO-000296 B PSBO-000303 B PSSA-000035 A PSPW-000014 A PSPW-000016 A PSPW-000024 A PSSA-000031 A PSBO-000207 B PSPW-000043 A PSPW-000042 A PSPW-000041 A PSPW-000040 A PSPW-000033 A PSPW-000032 A PSPW-000031 A PSPW-000012 A PSPW-000011 A PSPW-000010 A PSF22-000007 A PSF22-000014 A PSF22-000021 A PSF22-000038 A PSF22-000034 A PSF22-000029 A PSF22-000015 A PSF22-000040 A PSSA-000082 A PSSA-000081 A PSSA-000079 A PSSA-000076 A PSSA-000050 A PSSA-000049 A PSSA-000048 A PSSA-000046 A Title 5PTPLB09-A APPENDIX 2 KITTING AND LAYUP PRCEDURES A50TF265-S8 CARBON FIBER TOW PWA611 REV AD ADHESIVE BONDING PROCEDURES AND TESTS MATERIAL SPECIFICATION FOR BRAIDED GRAPHITE FILLER PS17203 REV K COATING, CONFORMAL,PRINTED WIRING BOARD STF1015 REV E, FINISH INSTRUCTION STF1706 REV K, FINISH INSTRUCTION STF1619 REV B, FINISH INSTRUCTION STF1065 REV A, FINISH INSTRUCTION STF1750 REV B, FINISH INTSTRUCTION PS11242 REV D TOLERANCE REQ FOR BOND DETAILS PS15500.4 REV A HEAT TREATING OF ALUMINUM ALLOYS TO THE -T6/ PS20018 REV F SURFACE FINISH REQ FOR ROUND HOLES PS20009 REV J METALLIC MATERIALS, AND PARTS, STRAIGHTENING O PS12050 REV U PICKLING STF1751 REV A, FINISH INSTRUCTION RTM WI FORM - TRANSFERRED RESIN TAG RESIN TRANSFERRING PS12030 REV AA - CLEANING, ALKALINE MMS519 REV E - INTERMEDIATE MODULUS CARBON FIBER/TOUGHENED E PS18059 REV K - PREPARATION AND APPLICATION OF SOLID FILM LU PS21252.2 REV D - VISUAL INSPECTION OF COMPOSITE PARTS AND B PS21335 REV D - PHYSIOCHEMICAL TEST METHODS FOR RESIN COMPOS SS8608 REV 3 ADESIVE BONDING, SYSTEM "D" MAIN AND TAIL ROTOR PWA36457 REV B RTM EPOXY RESIN PR500 PWA36458 REV B RTM FABRIC TACKIFIER PT500 PWA36475 REV A RESIN, BISMALEIMIDE-RTM PROCESSABLE 5250-4 SS8605 REV 3 ADHESIVE BONDING SYSTEM "A" MAIN AND TAIL ROTOR PS19204 REV C - COLD FORMING INTERNAL THREADS IN ALUMINUM AL S-142 EVALUATION OF EPOXY TACKIFIED CARBON FIBER FABRIC S-138 SOLID NONMETALLIC TESTS S-110 SOLID NONLETALLIC TESTS PWA-S-5732 REV H SPECIFICATION SUPPLEMENT PWA397 REV H CLASSIFICATION OF CHARACTERISTICS PWA388 REV D SURFACE TEXTURE PWA373 REV F INTERPRETATION OF COMPUTER GRAPHICS FILES FOR PWA36442 REV A FLUOROELASTOMER SHEET PWA362 REV N SURFACE TEXTURE (ROUGHNESS, WAVINESS, AND LAY) PWA36003 REV N ADHESIVE/SEALANT, SILICONE RUBBER 5PTMAT08-QPL-1 MATERIAL SPEC TAPE, CARBON FIBER, EPOXY RESIN 5PTMBT13-A MATERIAL SPEC FABRIC, CARBON FIBER, WOVEN, EPOXY 5PTMCT05 MATERIAL SPEC BRAIDED CARBON FIBER ROPE 5PTPCT01-A-A01 PROCESS SPEC INSPECTION, ULTRASONIC PROCEDURE 5PTMLT07-QPL MATERIAL SPEC QUALIFIED PRODUCT LIST FOR 5PTMLT05-A MATERIAL SPEC EPOXY RESIN AND TACKIFIER FOR RESIN 5PTMBT13-QPL-2 MATERIAL SPEC QUALIFIED PRDUCT LIST FOR 5PTPCT04-A PROCESS SPEC INSPECTION, RADIOGRAPHIC REQUIREMENT SS9170/680 REV 2 DEV 1 EXPENDABLE MANUFACTURING MATERIALS SS9170/680 REV 2 AMD 1, EXPENDABLE MFG MATERIALS WIPI SS9170/200 EXPENDABLE MANUFACTURING MATERIALS ALKALINE CLEAN SS9170/102 REV 1 EXPENDABLE MANUFACTURING MATERIALS ABRASIVE SS8609 REV 2 AMD 2, ADH BONDING, SYSTEM '"E" MAIN AND TAIL SS8609 REV 2 AMD 1 ADHESIV BONDING, SYSTEM "E" MAIN AND TAIL SS8609 REV 2 ADHESIVE BONDING, SYSTEM "E" MAIN AND TAIL ROTO SS8423 REV 5 AMD 1, DEGREASING OF METAL PARTS Issued Date 6/23/2005 6/16/2005 6/7/2005 3/11/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 2/21/2005 1/31/2005 1/24/2005 11/10/2004 11/10/2004 11/10/2004 11/4/2004 11/4/2004 9/30/2004 9/22/2004 9/22/2004 9/22/2004 8/30/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/25/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSSA-000034 PSSA-000033 PSSA-000032 PSSA-000029 PSSA-000028 PSF22-000074 PSF22-000068 PSF22-000066 PSF22-000065 PSF22-000064 PSF22-000046 GPS-FABR-0001 PSBO-000310 PSBO-000312 PSBO-000319 PSBO-000311 PSBO-000307 PSBO-000314 PSBO-000315 PSBO-000313 PSBO-000309 PSBO-000308 PSBO-000355 PSBO-000425 PSCS-000050 PSCS-000052 PSCS-000054 PSCS-000055 PSCS-000053 PSCS-000051 PSCS-000049 PSBO-000419 PSCS-000042 PSCS-000045 PSCS-000047 PSCS-000057 PSCS-000056 PSCS-000048 PSCS-000046 PSCS-000044 PSCS-000043 PSCS-000041 PSCS-000039 PSCS-000040 PSCS-000037 PSCS-000038 PSCS-000032 PSCS-000036 PSCS-000033 PSCS-000034 PSCS-000035 GPS-SHOP-0002 GPS-TEST-0001 PSCS-000019 PSBO-000043 Rev. A A A A A A A A A A A A B B B B B B B B B B B B A A A A A A A B A A A A A A A A A A A A A A A A A A A A B A B Title SS8607 REV 8 AMD 1 ADHESIVE BOND, SYSTEM "C", MAIN AND TAIL SS8607 REV 8 ADHESIVE BONDING, SYSTEM "C" MAIN AND TAIL ROTO SS8606 REV 3 ADHESIVE BONDING, SYSTEM "B" MAIN AND TAIL ROTO SS8602 REV 2 ADHESIVE BOND SYSTEM, STRUCTURAL COMPONENTS SS8556 ACCEPTANCE CRITERIA FOR PAINTED SURFACES COMMERICAL 5PTPTT01-B COMPOSITES STANDARD TEST METHODS FOR TESTING OF 5PTPLT12-B-A01 QUALIFICATION, APPROVAL AND CONTROL OF EPOXY 5PTPLT02-B PROCESS SPEC COMPOSITES, EPOXY, FABRICATION OF 5PTPLL20 FABRICATION OF PLASTIC PARTS BY VACUUM FORMING 5PTPLL15 FABRICATION OF FIBER GLASS REINFORCED EPOXY LAMINAT 5PTPJL15-C PROCESS SPEC INTEGRAL FUEL TANK COATING, PREPARAT FABRICATION AND ACCEPTANCE OF CARBON FIBER REINFORCED EPOXY PS21335.7 REV C - PHYSIOCHEMICAL TEST METHODS: ATOMIC ABSORP PS21335.9 REV C - PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI PS21335.18 REV B- PHYSIOCHEMICAL TEST METHODS: TMA AND RDS PS21335.8 REV C - PHYSIOCHEMICAL TEST METHODS: LIQUID-LIQUID PS21335.4 REV B - PHYSIOCHEMICAL TEST METHODS: GAS-LIQUID CH PS21335.11 REV C - PHYSIOCHEMICAL TEST METHODS: GAS CHROMATO PS21335.12 REV D - PHYSIOCHEMICAL TEST METHODS: METHOD FOR PS21335.10 REV C - PHYSIOCHEMICAL TEST METHODS: IR QUANTITAT PS21335.6 REV C - PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI PS21335.5 REV B - PHYSIOCHEMICAL TEST METHODS: IR QUANTITATI MCS6000.2 REV D - CONSUMABLE MATERIAL SPECIFICATION FOR HAND PS14034.3 REV E - FABRICATION OF NON-WOVEN GLASS FIBER REINF CMNP084-GKN-1 SPEC DEVIATION CSAC005-GKN-2 SPEC DEVIATION CSFS002-GKN-1 SPEC DEVIATION CSNP015 REV B CSEC001-GKN-1 SPEC DEVIATION CSAC005-GKN-1 SPEC DEVIATION CMNP05 REV C PS14034.2 REV G - DUCTS, PRESSURE, GLASS FABRIC REINFORCED P CMAC006-GKN-1 SPECIFICATION DEVIATION FORM CSNP021 REV C - ADHESIVE AND SOLVENT BONDING GLASS FABRIC PREIMPREGNATED EPOXY RESIN CSAC005-GKN-1 SPEC DEVIATION REQUIREMENTS, BONDED ALUMINUM ASSEMBLIES, AUTOCLAVE CURE POLISHED METAL SHEET PROCUREMENT AND INSPECTION CMAC004-GKN-1 SPEC DEVIATION CMNP036 REV H - EPOXY ADHESIVE PASTE, TWO-PART MODIFIED CSNP011 REV B - REWORK METHODS FOR ASSEMBLIES FABRICATED TO CMNP021 REV I - FUEL, PRESSURE AND WEATHER SEALANT CSFS035 REV V - CHEMICAL CLEANING OF METALS CSFS039 REV F - SOLVENT CLEANING - LIQUID CSAM043 REV C - EXTERIOR PAINT THICKNESS SPECIFICATION CSTI037 REV A - ULTRASONIC INSPECTION OF PAINT THICKNESS ON CMFS010 REV B - PRIMER SURFACER - CHEMICALLY CURED CSTI002 REV E - INSPECTION - PROCESS SPECIFICATION FOR PENET CMFS029 REV H - CORROSION PROTECTION PRIMER CSFS075 REV 0 - COLOR DEFINITION FOR COMMERCIAL AIRCRAFTJANU CSMP022 REV F - TORQUE VALUES -THREADED FASTENERS AND FITTIN SAFE HANDLING AND USE OF HAZARDOUS MATERIALS ACCEPTANCE, REINSPECTION, & STORAGE OF C/E, G/E & ADHESIVES CSMP024 REV K - MACHINING PRACTICES PS12050.8 REV F - PICKLING LOW ALLOY STEELS Issued Date 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 8/9/2004 7/16/2004 7/14/2004 7/14/2004 7/14/2004 7/14/2004 6/15/2004 6/15/2004 6/15/2004 6/15/2004 6/15/2004 6/15/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 4/12/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 3/31/2004 1/23/2004 1/14/2004 1/14/2004 1/13/2004 1/13/2004 12/9/2003 12/9/2003 12/9/2003 12/9/2003 12/9/2003 11/21/2003 11/21/2003 11/20/2003 11/19/2003 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSCS-000001 PSCS-000031 PSCS-000030 PSCS-000029 PSCS-000028 PSCS-000027 PSCS-000026 PSCS-000025 PSCS-000024 PSCS-000023 PSCS-000022 PSCS-000021 PSCS-000014 PSCS-000016 PSCS-000017 PSCS-000020 PSCS-000018 PSCS-000015 PSCS-000013 PSBO-000041 PSBO-000465 PSBO-000128 PSCS-000002 PSCS-000004 PSCS-000006 PSCS-000008 PSCS-000010 PSCS-000012 PSCS-000011 PSCS-000009 PSCS-000007 PSCS-000005 PSCS-000003 PSBO-000324 PSBO-000468 PSBO-000390 PSBO-000270 GPS TEMPLATE PSBO-000459 PSBO-000460 PSBO-000097 PSBO-000139 PSBO-000339 PSBO-000341 PSBO-000343 PSSA-000003 PSBO-000352 PSBO-000351 PSBO-000350 PSBO-000349 PSBO-000348 PSBO-000347 PSBO-000346 PSBO-000345 PSBO-000344 Rev. B A A A A A A A A A A A A A A A A A A B A B A A A A A A A A A A A B A B B A A A A A A A A A A A A A A A A A A Title CMAC004 REV C - CARBON REINFORCED EPOXY, PREIMPREGNATED, 250 CSRS014 REV ORIG - MARKING: IDENTIFICATION OF EQUIPMENT, ASS CSPS004 REV E - APPLICABILITY OF CESSNA SPECIFICATIONS CSMP017 REV L - FABRICATION PRACTICES FOR SHEET METAL AND EX CSAM030 REV C - ELECTRICAL BONDING AND VERIFICATION CPTI004 REV E - TEST PROCEDURES FOR ADHESIVES CMNP091 REV E - COMPOSITE SURFACING MATERIALS CMNP038 REV G - EPOXY FILM ADHESIVE 250F CURE CSNP035 REV M - SEALING - PRESSURE, WEATHER AND FUEL CSMP053 REV C - COUNTERSINKING AND DIMPLING CSMP052 REV F - INSTALLATION, BLIND BOLTS AND RIVETS CSMP051 REV J - INSTALLATION SOLID DRIVEN RIVETS CSFS021 REV F - MECHANICAL FINISHES FOR ALUMINUM AND STAINLE CSFS042 REV H - VAPOR DEGREASING CSFS084 REV E - COATINGS, VOC COMPLIANT, APPLICATION CSMP028 REV K - INSTALLATION, MECHANICAL FASTENERS CSMP003 REV J - HEAT TREATMENT OF ALUMINUM ALLOYS CSFS027 REV H - CHEMICAL FILM, CHROMATE CONVERSION COATINGS CMMP018 REV E - ALUMINUM ALLOY 6013 PS12050.5 REV J - PICKLING STAINLESS STEEL D210-13515-1 REV ORG - MANUFACTURE OF RESIN TRANSFER MOLDED PS15063 REV K - STRESS RELIEF AND EMBRITTLEMENT RELIEF CMAC006 REV G - GLASS FABRIC PREIMPREGNATED EPOXY RESIN CPTI003 REV C - TEST PROCEDURES FOR COMPOSITE PREPREGS AND C CSAC005 REV K - MANUFACTURE OF CRITICAL FIBER REINFORCED POL CSFS001 REV Q - FINISH CODES - COMMERCIAL AIRCRAFT CSNP009 REV - - ENGINEERING QUALIFICATION OF FACILITIES AND CSNP016 REV B - ENGINEERING QUALIFICATION OF CURING DEVICES CSNP012 REV A - MACHINING OF COMPOSITE ASSEMBLIESEXPORT CONT CSFS002 REV F - PREPARATION OF NONMETALLIC SURFACES CSEC001 REV D - CRITERIA FOR CONTROLLED AREAS AND CLEAN ROOM CQRS REV C - QUALITY REQUIREMENTS CMNP084 REV I - CONTROLLED EXPENDABLE MATERIALS PS22241 REV H - SALVAGE OF MACHINED TITANIUM PARTS BY FUSION 4M38 REV H - WASHER - FLAT, LAMINATED SHIM MMS525 REV K - ARAMID FIBER CLOTH PREPREG PS21151.10 REV E - TEST METHODS FOR COMPOSITES: OPEN HOLE TE GPS TEMPLATE PS15325 REV A - VACUUM PROCESSING OF METALS PS15326 REV A - VACUUM ANNEALING AND VACUUM DEGASSING OF TIT MMS728 REV A- CORE MATERIAL, PHOSPHORIC ACID ANODIZED ALUMI PS13225 REV C - BRUSH ANODIZING ALUMINUM ALLOYS MCS5901.10 REV * - CONSUMABLE MATERIAL REQUIREMENTS, BARRIER MCS5901.13 REV A - CONSUMABLE MATERIAL REQUIREMENTS, SILICON MCS5901.15 REV A - CONSUMABLE MATERIAL REQUIREMENTS, MOLD RE SS9152 REV 01 - PROPERTY EVALUATION METHODS FOR NONMETALLIC MCS5901.9 REV B - CONSUMABLE MATERIAL REQUIREMENTS, GLOVES MCS5901.8 REV * - CONSUMABLE MATERIAL REQUIREMENTS, VACUUM B MCS5901.7 REV * - CONSUMABLE MATERIAL REQUIREMENTS, PRESSURE MCS5901.6 REV * - CONSUMABLE MATERIAL REQUIREMENTS, NYLON VA MCS5901.5 REV * - CONSUMABLE MATERIAL REQUIREMENTS, RELEASE MCS5901.2 REV * - CONSUMABLE MATERIAL REQUIREMENTS, FIBERGLA MCS5901.19 REV * - CONSUMABLE MATERIAL REQUIREMENTS, APRONS/ MCS5901.18 REV * - CONSUMABLE MATERIAL REQUIREMENTS, VERIFIL MCS5901.16 REV * - CONSUMABLE MATERIAL REQUIREMENTS, COTTON Issued Date 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/18/2003 11/12/2003 11/12/2003 11/12/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/31/2003 10/30/2003 10/30/2003 10/2/2003 9/18/2003 9/11/2003 8/29/2003 8/29/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000410 PSBO-000408 PSBO-000407 PSBO-000406 PSBO-000402 PSBO-000401 PSBO-000400 PSBO-000398 PSBO-000396 PSBO-000456 PSBO-000455 PSBO-000452 PSBO-000443 PSBO-000435 PSBO-000434 PSBO-000431 PSBO-000424 PSBO-000423 PSBO-000458 PSBO-000457 PSBO-000422 PSBO-000421 PSBO-000420 PSBO-000417 PSBO-000416 PSBO-000415 PSBO-000413 PSBO-000411 PSBO-000394 PSBO-000393 PSBO-000387 PSBO-000380 PSBO-000376 PSBO-000374 PSBO-000368 PSBO-000360 PSBO-000342 PSBO-000340 PSBO-000338 PSBO-000096 PSBO-000231 PSBO-000234 PSBO-000238 PSBO-000242 PSBO-000260 PSBO-000259 PSBO-000258 PSBO-000257 PSBO-000256 PSBO-000255 PSBO-000254 PSBO-000253 PSBO-000252 PSBO-000271 PSBO-000269 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title MMS714 ADDENDUM 1 REV N - APPROVED MMS 714 MATERIAL SOURCES MMS704 ADDENDUM 1 REV C - APPROVED MMS 704 MATERIAL SOURCES MMS704 REV F - CORE MATERIAL, ALUMINUM HONEYCOMB, FLEXIBLE, MMS549 ADDENDUM 1 REV N - APPROVED MMS 549 MATERIAL SOURCES MMS538 ADDENDUM 1 REV E - APPROVED MMS 538 MATERIAL SOURCES MMS538 REV F - PLASTIC MOLDING COMPOUND, EPOXY RESIN, CARBON MMS534 ADDENDUM 1 REV D - APPROVED MMS 534 MATERIAL SOURCES MMS533 ADDENDUM 1 REV C - APPROVED MMS 533 MATERIAL SOURCES MMS529 ADDENDUM 1 REV E - APPROVED MMS 529 MATERIAL SOURCES DMS2297 REV D - PHENOLIC GLASS FABRIC, "B" STAGE LAMINATING, DMS2296 REV C - MODIFIED PHENOLIC GLASS CLOTH, "B" STAGE PRE DMS 2180 REV J - FOAMING ADHESIVE, CORE SPLICING AND CORE TO PS21249 REV F - OPTICAL ACCEPTANCE STANDARDS FOR AV-8 TRANSP PS20108 REV H - STORAGE AND HANDLING OF THE AV-8 AND T-45 SE PS20022.3 REV K - CHEMICAL MILLING OF TITANIUM AND TITANIUM PS14240.2 REV F - CARBON/EPOXY SINE WAVE SPARS/RIBS: FABRICA ST9M880 REV E - GROMMET, NON-METALLIC - HEAT SHRINKABLE ST7M428 REV D - HOSE ASSEMBLY, NON-METALLIC-HIGH PRESSURE DMS2310 REV E - ROTO-MOLDED NYLON DMS2302 REV C - SHIELDING, EXPANDED FOIL ST7M1138 REV A - HOSE ASSEMBLY, HIGH TEMPERATURE, LOW PRESSU ST3M608 REV K - COLLAR- PIN, RIVET, THREADED, SELF-LOCKING, ST3M525 REV T - COLLAR - PIN, RIVET, THREADED, SELF-LOCKING, ST3M497REP REV * - BOLT - DOUBLE HEX HEAD, 0.0156 OVERSIZE, ST3M1068 REV L - FASTENER - BLIND, INTERNAL THREAD, PROTRUDI ST3M1067 REV M - FASTENER - BLIND, INTERNAL THREAD, 100 HEA MMS INACTIVE INDEX MMS727 REV E - SYNTACTIC CORE MMS528 ADDENDUM 1 REV C - APPROVED MMS 528 MATERIAL SOURCES MMS528 REV F - ARAMID FIBER/EPOXY CLOTH PREPREG MMS5030 ADDENDUM 1 REV D - APPROVED MMS 5030 MATERIAL SOURCE MMS5027 REV G - CARBON FIBER/TOUGHENED EPOXY UNIDIRECTIONAL MMS5025 REV D - HIGH STRENGTH CARBON FIBER/TOUGHENED EPOXY C MMS5024 REV D - HIGH STRENGTH CARBON FIBER/TOUGHENED EPOXY U MMS440 REV F - ELASTOMERIC MATERIAL MMS347 REV G - EPOXY SYNTACTIC MATERIALS MCS5901.14 REV * - CONSUMABLE MATERIAL REQUIREMENTS, CORK/RU MCS5901.11 REV * - CONSUMABLE MATERIAL REQUIREMENTS, PREPREG MCS5901.1 REV * - CONSUMABLE MATERIAL REQUIREMENTS, PEEL PLY PS15600 REV G - GENERAL HEAT TREATING CRITERIA FOR NICKEL BA PS20207 REV J - REPAIR OF ALUMINUM SKIN - HONEYCOMB CORE, SA PS20209.2 REV * - REPAIR METHODS FOR FIBER REINFORCED EPOXY PS20700 REV B - ASSEMBLY SHOP PRACTICE INDEX (DOUGLAS AIRCRA PS20701 REV C - FABRICATION PRACTICES FOR METALS; MINIMUM (D PS21150.8 REV A - TEST METHODS FOR BONDED METAL OR COMPOSIT PS21150.7 REV A - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150.6 REV A - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150.5 REV A - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150.4 REV C - TEST METHODS FOR BONDED METAL AND COMPOSIT PS21150.3 REV A - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150.2 REV B - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150.1 REV B - TEST METHODS FOR BONDED METAL STRUCTURES ( PS21150 REV B - TEST METHODS FOR BONDED METAL STRUCTURES PS21151.11 REV A - TEST METHODS FOR COMPOSITES: SINGLE LAP S PS21151.9 REV D - TEST METHODS FOR COMPOSITES: COUPON COMPRE Issued Date 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/18/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000268 PSBO-000267 PSBO-000266 PSBO-000265 PSBO-000264 PSBO-000262 PSBO-000261 PSBO-000251 PSBO-000250 PSBO-000249 PSBO-000248 PSBO-000247 PSBO-000246 PSBO-000244 PSBO-000243 PSBO-000336 PSBO-000335 PSBO-000334 PSBO-000331 PSBO-000330 PSBO-000325 PSBO-000323 PSBO-000320 PSBO-000295 PSBO-000337 PSBO-000291 PSBO-000290 PSBO-000289 PSBO-000288 PSBO-000278 PSBO-000277 PSBO-000273 PSBO-000272 PSBO-000304 PSBO-000302 PSBO-000300 PSBO-000241 PSBO-000235 PSBO-000232 PSBO-000230 PSBO-000188 PSBO-000222 PSBO-000033 PSBO-000076 PSSA-000021 PSSA-000020 PSSA-000019 PSSA-000018 PSSA-000017 PSSA-000016 PSSA-000014 PSSA-000004 PSBO-000211 PSSA-000022 PSBO-000209 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title PS21151.7 REV F - TEST METHODS FOR COMPOSITES: COUPON TENSIL PS21151.6 REV B - TEST METHODS FOR COMPOSITES: EDGEWISE SAN PS21151.5 REV B - TEST METHODS FOR COMPOSITES: RAIL SHEAR PS21151.4 REV C - TEST METHODS FOR COMPOSITES: DOUBLE LAP SH PS21151.3 REV B - TEST METHODS FOR COMPOSITES: LONGITUDINAL PS21151.1 REV C - TEST METHODS FOR COMPOSITES: SANDWICH BEA PS21151 REV D - TEST METHODS FOR COMPOSITES PS20710.2 REV A - HIGH STRENGTH STEEL, CHROMIUM PLATE, GRIND PS20710.1 REV C - HIGH STRENGTH STEELS, MACHINING OF PS20710 REV E - HIGH STRENGTH STEELS, MACHINING AND GRINDING PS20708 REV D - HOLE PREPARATION IN HIGH STRENGTH STEELS PS20701.5 REV B - SPRING FABRICATION PRACTICES (DOUGLAS AIRC PS20701.4 REV C - SHEARING, PUNCHING AND BLANKING (DOUGLAS A PS20701.2 REV H - FABRICATION PRACTICES; SHEET METAL (DOUGLA PS20701.1 REV H - EDGE CONDITION REQUIREMENTS (DPS 4.710-1) PS24000.3 REV A - DOCUMENTING A PROCESS PS24000.2 REV A - MEASURING PROCESS CAPABILITY PS24000.1 REV A - DETERMINING STATISTICAL CONTROL PS23405 REV C - CERTIFICATION OF CHEMICAL PROCESSES PS23403 REV D - PROCESS SOLUTIONS, FREQUENCY OF ANALYSIS OF PS22250 REV K - ARC FUSION WELDING STEELS AND CORROSION AND PS22240 REV L - ARC FUSION WELDING TITANIUM AND TITANIUM ALL PS22000 REV N - WELDING, RESISTANCE, ALUMINUM, NON-HARDENING PS21252 REV G - VISUAL INSPECTION OF COMPOSITE PARTS AND BON PS24000.4 REV A - VERIFICATION METHODS AND TOOLS PS21239 REV D - COATING THICKNESS MEASUREMENT PS21236 REV D - ULTRASONIC THICKNESS MEASUREMENTS PS21233.8 REV C - NONDESTRUCTIVE TESTING OF HONEYCOMB ASSY'S PS21233.1 REV F - ACCEPTANCE CRITERIA FOR NONDESTRUCTIVE TES PS21205 REV K - TEMPER ETCH INSPECTION FOR MACHINED OR GROUN PS21204 REV K - FUSION WELD RADIOGRAPHIC QUALITY REQUIREMENT PS21199 REV C - ALPHA-CASE DETECTION ON TITANIUM PS21153 REV C - TEST METHOD FOR DETERMINING NODE BOND STRENG PS21335.1 REV D - PHYSIOCHEMICAL TEST METHODS: THERMAL ANALY PS21332.1 REV H - ACCEPTANCE, REINSPECTION, & STORAGE OF COM PS21330.1 REV K - ACCEPTANCE, REINSPECTION, AND STORAGE OF A PS20700.7 REV E - ASSEMBLY SHOP PRACTICE, COMPOSITE REPAIR A PS20210 REV D - DISPOSAL OF SCRAPPED COMPOSITE & SALVAGE OF PS20209 REV L - REPAIR METHODS FOR FIBER REINFORCED EPOXY A PS20159 REV C - CRYOGENIC FLUIDS, NON FLAMMABLE; SAFETY REQU PS17120 REV K - BONDING AND GROUNDING; ELECTRICAL PS20004 REV J - REWORK OF SCRATCHED, ABRADED OR CORRODED PS12037 REV N - CLEANING OF TITANIUM DETAIL PARTS FOR ADHESI PS14023 REV R - PEENING SS9152/PP0603 REV 01 - MEASUREMENT OF VOLATILE CONTENT SS9152/PP0602 REV 01 - MEASUREMENT OF VOLATILE CONTENT SS9152/PP0601 REV01 - MEASUREMENT OF VOLATILE CONTENT SS9152/PP0502 REV 01 - MEASUREMENT OF GEL TIME (FISHER-JOHN SS9152/PP0501 REV 01 - MEASUREMENT OF GEL TIME (HEATED PLATE SS9152/PP0402 REV 01 - RESIN FLOW TEST (BLEEDER) SS9152/AM6201 REV 00 - INSTRUMENTED THICK ADHEREND SHEAR TES SS9152/AF6201 REV 00 - FABRICATION OF THICK ADHEREND BONDED PS19408 REV E - FASTENERS, QUARTER TURN, INSTALLATION SS9152/PP0901 REV 01 - MEASUREMENT OF RESIN CONTENT (SOLVENT PS19260.1 REV C - INSERTS, HELI-COIL, REPAIR TYPE; INSTALLAT Issued Date 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/14/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 GKN DESIGN AUTHORITY SPECIFICATION MATRIX Release Date: 4 May 2015 Note to Supplier: Please see Quality Requirement # QC1300 regarding the use of this matrix. Contact your GKN Buyer or Supplier Quality Engineer with any questions or concerns. Document No. PSBO-000200 PSBO-000194 PSBO-000184 PSBO-000173 PSBO-000169 PSBO-000168 PSBO-000134 PSBO-000229 PSBO-000226 PSBO-000224 PSBO-000212 PSBO-000133 PSBO-000132 PSBO-000131 PSBO-000129 PSBO-000127 PSBO-000125 PSBO-000124 PSBO-000122 PSBO-000138 PSBO-000137 PSBO-000121 PSBO-000120 PSBO-000119 PSBO-000117 PSBO-000116 PSBO-000115 PSBO-000112 PSBO-000104 PSBO-000093 PSBO-000089 PSBO-000075 PSBO-000040 PSBO-000049 PSBO-000074 PSBO-000018 PSSA-000002 PSSA-000001 PSSA-000005 PSSA-000006 PSSA-000007 PSSA-000008 Rev. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Title PS19122 REV K - FASTENERS, CHOBERT RIVETS; INSTALLATION PS19004 REV D - INSERTS; FLOATING, THREADED, INSTALLATION OF PS17031.1 REV C - BEARINGS, THREADED OUTER RING (K4M10, K4M1 PS16001.3 REV F - AGE CONTROL MARKING PS15935 REV J - HEAT TREATMENT OF BERYLLIUM COPPER ALLOYS PS15815 REV A - SOLUTION HEAT TREATING AND AGING OF TI-15V-3 PS15500.5 REV A - HEAT TREATING ALUMINUM ALLOYS TO THE -T81, PS20024 REV P - DEBURRING, BLENDING, AND SANDING OF METAL PA PS20016 REV C - BARREL TUMBLING AND VIBRATORY FINISHING PS20009 REV J - METALLIC MATERIALS AND PARTS; STRAIGHTENING PS19419 REV D - NUTPLATE, RIVETLESS; INSTALLATION PS15500.4 REV A - HEAT TREATING OF ALUMINUM ALLOYS TO THE -T PS15500.3 REV A - HEAT TREATING OF ALUMINUM ALLOYS TO THE -T PS15500.2 REV A - HEAT TREATING ALUMINUM ALLOYS TO THE -O (A PS15063.1 REV B - STRESS RELIEF AND EMBRITTLEMENT RELIEF (DO PS15000.15 REV A - ANNEALING ALLOY STEEL PS15000.13 REV B - HARDENING PH GRADE STAINLESS STEELS TO TH PS15000.12 REV B - HARDENING PH GRADE STAINLESS STEEL TO CON PS15000.10 REV A - HARDENING MARTENSITIC STAINLESS STEELS TO PS15500.9 REV A - STRESS RELIEF OF ALUMINUM ALLOYS PS15500.8 REV A - HEAT TREATING OF ALUMINUM ALLOYS TO THE -T PS15000.9 REV A - ANNEALING STAINLESS STEEL AND 18% NI (GRAD PS15000.8 REV A - MARTEMPERING 4330V PS15000.7 REV A - MARTEMPERING 4340 PS15000.5 REV A - HARDENING ALLOY STEELS TO 180,000 PSI MINI PS15000.4 REV A - NORMALIZING AND TEMPERING ALLOY STEELS PS15000.3 REV A - NORMALIZING ALLOY STEELS PS14999 REV J - COBONDING CARBON/EPOXY PREPREGS, ALUMINUM HO PS14269 REV E - FIBER PLACED CARBON/EPOXY LAMINATES, FABRICA PS14149 REV B - CUTTING OF FOAM, PLASTIC AND RUBBER PARTS PS14133 REV A - PHENOLIC PLASTICS; MACHINING OF (DOUGLAS AIR PS14017 REV V - FORMING OF TITANIUM ALLOYS (EXPORT CONTROL) PS12050.4 REV F - PICKLING NICKEL AND COBALT BASE ALLOYS (EX PS13105 REV K - PLATING, ELECTROLESS NICKEL (EXPORT CONTROL PS14016 REV L - PANELS, ILLUMINATED, PLASTIC AS7788: ACCEPT PS11215 REV M - APPLICATION OF AMS-S-8802 SEALING COMPOUNDS 2000-777-009D REV 00 - FILAMENT WINDING OF COMPOSITE COM 2000-729-003 R0-01 - INSPECTION AND ACCEPTANCE CRITERIA SPEC 2000-777-009A REV A - COMPOSITE COMPONENTS, GENERAL PROCESS 2000-777-023 REV 3 - 350F(177) CURING EPOXY IMPREGNATED UNDI 2000-777-025 REV01 - 350F(177C) CURING EPOXY IMPREGNATED WOV 2000-777-307 REV00 Issued Date 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 8/12/2003 7/23/2003 7/3/2003 7/1/2003 7/1/2003 7/1/2003 7/1/2003 7/1/2003
