Kirkwood Continuing Education
Environmental, Industrial Health
and Safety Training
FALL 2015
www.kirkwood.edu/ce
Welcome to Kirkwood Continuing Education
Environmental, Industrial Health
and Safety Training
Kirkwood Community College’s Environmental, Industrial Health
and Safety Training classes are designed to meet the industrial
health and safety training needs of business and industry with
comprehensive and up-to-date training curriculum. Our programs
promote worker protection and the maintenance of a clean and
safe environment through high quality, standards-based education
and training. An experienced team of authorized instructors
present up-to-date federal and state safety and health regulations.
CONTENTS | FALL 2015
1
2
3
3
7
Hazardous Materials
8
9
Area Hotels/Campus Map
Confined Space
DOT Training
OSHA Education Center
OSHA Compliance
Registration Information
KIRKWOOD CLASSROOM SITES
Kirkwood Continuing Education Training Center
101 50th Ave. SW
Cedar Rapids, IA
319-398-5678
Kirkwood Community College declares and affirms to its students, employees and to the public that it does not discriminate on the basis of sex, race, color, creed, religion, national origin, age, physical or mental
ability, sexual orientation, gender, gender identity, physical attributes, veteran status, genetic information, socioeconomic status, and actual or potential parental, family or marital status in its educational programs,
activities, admission procedures or employment practices. The College affirms its commitment to comply with all applicable federal and state laws, regulations and orders.
If you have questions or complaints related to compliance with this policy, please contact Michael Roberts, Executive Director of Human Resources at Kirkwood Community College, 313 Kirkwood Hall, 6301
Kirkwood Blvd., SW, Cedar Rapids, IA 52404, or by phone to (319) 398-5572, or email to michael.roberts@kirkwood.edu; or Vice President, Student Services, Jon Buse, 115 Iowa Hall, at (319) 398-5584, or email to
jon.buse@kirkwood.edu; or Vice President, Academic Affairs, Bill Lamb, 100 Iowa Hall, at (319) 398-5509, or email to bill.lamb@kirkwood.edu; or the Director of the Office for Civil Rights, U.S. Department of Education,
Citigroup Center, 500 W. Madison, Suite 1475, Chicago, IL 60661, phone number (312) 730-1560, fax (312) 730-1576.
Continuing Education | Kirkwood Community College
Hazardous Materials
Technician Level Emergency and
Disaster Response Refresher
This course is the annual refresher course for
the Technician Level Emergency and Disaster
Response to Chemical Release 24 hour course.
The course addresses the annual refresher
requirements for operations and technician level
emergency responses, 29 CFR 1910.120(q)
(6)(ii) and (iii). There will be coverage on initial
action planning, level appropriate PPE will be
donned, and decontamination lines will be
set-up and operated. Hands-on exercises will
be conducted utilizing PPE and specialized
equipment.
ETHM-1006 / 1 session / $135
>63917
Wed 8am-5pm
Jul 15
Kirkwood Continuing Education Training Center 1220
>63918
Thu 8am-5pm
Technician Level Emergency and
Disaster Response to Chemical
Releases 24-hours
HAZWOPER Training 24-hour Online
Instruction for 40-hour Waste Site
Worker (online)
This course provides training for industrial
hazmat and spill response teams, and industrial
emergency response personnel as outlined
in OSHA 29 CFR 1910.120(q). Hazards of
a release, roles of hazmat team members,
hazard recognition, use of personal protection
equipment,
control
operations,
incident
command, decontamination and termination will
be covered. Hands-on exercises in full PPE will
be conducted.
ETHM-1046 / 3 sessions / $350
This course is the online portion of the 40hour class using the nationally recognized
curriculum with self-paced, open entry, open
exit for waste site workers that meets all the
requirements of 29 CFR 1910.120, OSHA’s
Hazardous Waste Site Worker and Emergency
Response Standard. The course consists of
an online text, interactive exercises, web links,
self-grading quizzes, and final exam. There are
two days of face-to-face training to complete
the 40 hours for HAZWOPER Certification, or
as a stand-alone course to enhance your skills.
Topics include exercises on PPE, regulations,
site characterization, confined space, decon,
and more.
ETHM-2300 / $275
>63938
Tue/Wed/Thu 8am-5pm
Jul 21-Jul 23
Kirkwood Continuing Education Training Center 1102
>63939
Mon/Tue/Wed 8am-5pm
Sep 14-Sep 16
Kirkwood Continuing Education Training Center 1112
>63941
Mon/Tue/Wed 8am-5pm
Nov 9-Nov 11
Kirkwood Continuing Education Training Center 1112
>71307
Online anytime
Sep 17
Kirkwood Continuing Education Training Center 1102
>63919
Fri 8am-5pm
Nov 20
Kirkwood Continuing Education Training Center 1112
>72923
Fri 8am-5pm
Jan 15
Kirkwood Continuing Education Training Center 1112
HAZWOPER 16-hour Hands-on Training
for Online 40-hours
There are two days of face-to-face training to
complete the 40 hours for Hazardous Waste
Site Worker (HAZWOPER) or as a stand-alone
course to enhance your skills. Topics include
exercises on PPE, container recognition, site
characterization, site entry and decontamination
operations.
ETHM-1013 / 2 sessions / $199
>63926
Wed/Thu 8am-5pm Jul 29-Jul 30
Kirkwood Continuing Education Training Center 1220
>63927
Mon/Tue 8am-5pm Oct 12-Oct 13
Kirkwood Continuing Education Training Center 1112
HAZWOPER Refresher (online)
This Internet-based course provides eight hours
of interactive training online for the annual
refresher to the 40-hour Hazardous Waste Site
Worker course (29 CFR 1910.120). This course
fulfills the requirement of OSHA/EPA.
ETHM-2300 / $145
>71305
HAZWOPER Refresher for Supervisors
8-hours (online)
This Internet-based course provides eight
hours of interactive training online for the
annual refresher to the 40-hour Hazardous
Waste Site Worker course (29 CFR 1910.120).
This course places greater emphasis on
supervisory functions and fulfills the OSHA/EPA
requirements for supervisors.
ETHM-2300 / $145
>71306
Hazardous Waste Site Worker
(HAZWOPER) Refresher 8-hours
This course is the annual refresher to the
40-hours Hazardous Waste Site Worker course
(29 CFR 1910.12). This class fulfills the
requirement for both workers and supervisors.
ETHM-1015 / 1 session / $135
>63930
Fri 8am-5pm
Aug 14
Online anytime
Online anytime
“A great experience.
The real life scenarios really
opened my eyes to the potential
for many hazards.”
– Justin Jensen
Kirkwood Continuing Education Training Center 1112
Environmental, Industrial Health and Safety Training | Register online at www.kirkwood.edu/ce
1
Confined Space
Confined Space Rescue Team Training
40-hours
This 40-hour course is designed for employees
who are responsible for performing confined
space entries on the job. This program will
train the employee so they may be part of a
confined space rescue team, and is based
on standards established by OSHA 29 CFR
1910.146. Students will perform victim retrieval
in simulated and actual confined spaces. This
course includes simple and compound rope
hauling systems, as well as advanced confinedspace entry and extrication techniques.
Emphasis is placed on rope rigging, hazard
identification, and hazard mitigation skills.
ETHM-1001 / 5 sessions / $575
>63890
Mon-Fri 8am-5pm
Jul 13-Jul 17
Kirkwood Continuing Education Training Center 1112
>63892
Mon-Fri 8am-5pm
Nov 30-Dec 4
Kirkwood Continuing Education Training Center 1112
>72922
Mon-Fri 8am-5pm
Jan 25-Jan 29
Kirkwood Continuing Education Training Center 1112
Custom
Training
Need training for your company? We can
customize any of these courses to best
meet your organization’s specific needs.
Training can be scheduled on-site at your
workplace or at one of our facilities.
Kirkwood Training
& Outreach Services
For more information, contact
us at 319-398-5623 or
visit www.kirkwood.edu/ktos.
2
Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
Continuing Education | Kirkwood Community College
DOT Training
OSHA Education Center
DOT Required Hazardous Materials
Training (Job Specific)
500 Trainer Course in OSHA
Standards for Construction
This course is offered for shippers and handlers
of hazardous materials. Areas covered include
general awareness/familiarization, functionspecific safety, and security awareness training
described under 49 CFR 172.704. Tuition
includes a textbook and 49 CFR manual.
ETHM-1003 / 1 session / $175
This course is designed for personnel in the
private sector interested in teaching the 10and 30-hour construction safety and health
outreach program to their employees and other
interested groups. Special emphasis is placed
on topics that are required in the 10- and 30hour programs as well as on those that are
the most hazardous, using OSHA standards as
a guide. Participants are briefed on effective
instructional approaches and the effective use
of visual aids and handouts. This course allows
the student to become a trainer in the outreach
program, to conduct both a 10- and 30-hour
construction safety and health course, and to
issue cards to participants verifying course
completion. Prerequisites: OSHA 510 course and
five years of construction safety experience, a
college degree in occupational safety and health,
and a Certified Safety Professional (CSP), or
Certified Industrial Hygienist (CIH) designation.
The applicable training area may be substituted
for two years of experience. NOTE: Students
who wish to participate as authorized trainers in
the outreach program must successfully pass
a written exam, given at the end of the course,
and an oral presentation.
ETOS-3000 / 4 sessions / $749
>63895
Tue 8am-5pm
Jul 21
Kirkwood Continuing Education Training Center 1112
>63897
Mon 8am-5pm
Sep 28
Kirkwood Continuing Education Training Center 1112
>63898
Fri 8am-5pm
Dec 11
Kirkwood Continuing Education Training Center 1112
DOT Required Hazardous Materials
Training (Job Specific Refresher)
DOT Hazardous Materials
Transportation (online)
This course serves as the required training
and refresher for shippers and handlers of
hazardous materials. Topics include using
a hazardous materials table, preparation of
shipping papers, and selection and preparation
of hazmat packages for shippers and handlers.
Participants are encouraged to bring questions
and problems for class discussion. This course
needs to be completed every three years.
ETHM-1004 / 1 session / $99
This course is designed to familiarize you with
the DOT hazard communication system related
to safety and security issues. It will help you
understand the labels, placards, shipping
papers, and markings associated with the
transportation of hazardous material. You will
learn how to read the Hazardous Material Table
and the 2008 Emergency Response Guidebook.
The course includes labeling exercises, form
completions and a self-test. Students can
access the DOT Regulations and the CFR
through online links. This course can be used for
the DOT required three year refresher training.
ETHM-2300 / $145
>63910
Thu 8am-12pm
Jul 9
Kirkwood Continuing Education Training Center 1112
>63912
Fri 8am-12pm
Sep 25
Kirkwood Continuing Education Training Center 1102
>63913
Fri 8am-12pm
Nov 6
>71303
>63818 Tue/Wed/Thu/Fri 8am-5pm Sep 15-Sep 18
Kirkwood Continuing Education Training Center 1102
Online anytime
Kirkwood Continuing Education Training Center 1112
“It was a great day.
Trainers were relatable
and answered the questions
that pertained to my job.”
– Miranda McDowell
Environmental, Industrial Health and Safety Training | Register online at www.kirkwood.edu/ce
3
501 Trainer Course in OSHA Standards
for General Industry
503 Update for OSHA Trainers
in General Industry
511 Occupational Safety and Health
Standards for General Industry
This course is designed for personnel in the
private sector interested in teaching the 10and 30-hour general industry safety and health
outreach program to their employees and other
interested groups. Special emphasis is placed
on topics that are required in the 10- and 30hour programs as well as on those that are
the most hazardous, using OSHA standards as
a guide. Participants are briefed on effective
instructional approaches and the effective use
of visual aids and handouts. This course allows
the student to become a trainer in the outreach
program, to conduct both a 10- and 30-hour
general industry safety and health course, and
to issue cards to participants verifying course
completion. Prerequisites: OSHA 511 course and
five years of general industry safety experience,
a college degree in occupational safety and
health, and a Certified Safety Professional
(CSP), or Certified Industrial Hygienist (CIH)
designation. The applicable training area may
be substituted for two years of experience.
NOTE: Students who wish to participate as
authorized trainers in the outreach program
must successfully pass a written exam, given at
the end of the course, and an oral presentation.
ETOS-3001 / 4 sessions / $749
This course is designed for private sector
personnel who have completed OSHA 501
Trainer Course in OSHA Standards for General
Industry and who are active trainers in the
outreach program. It provides an update on
OSHA general industry standards and OSHA
policies. Prerequisites: OSHA 501 course. NOTE:
Outreach trainers are required to attend this
course once every four years to maintain their
trainer status. Students must bring their current
trainer’s card for validation.
ETOS-3003 / 3 sessions / $599
This course is an introduction to OSHA policies,
procedures and standards, as well as general
industry safety and health principles. The
scope and application of the OSHA General
Industry Standards is discussed. Special
emphasis is placed on those areas that are
most hazardous, along with recommended
abatement techniques. Current 29 CFR 1910
will be provided.
ETOS-3005 / 4 sessions / $749
>63837 Wed/Thu/Fri 8am-5pm
Nov 4-Nov 6
Kirkwood Continuing Education Training Center 1118
>63843 Tue/Wed/Thu/Fri 8am-5pm Sep 8-Sep 11
Kirkwood Continuing Education Training Center 1118
>72924
Tue/Wed/Thu/Fri 8am-5pm Jan 26-Jan 29
Kirkwood Continuing Education Training Center 1118
7105 Evacuation and Emergency Planning
“Excellent instructors
and a relaxing
teaching environment.”
– Jo-Dee Schomaker
This course is an overview of requirements
and considerations for developing an effective
emergency action plan and evacuation plan
for small business. The goal of this course is
to increase the participants’ knowledge of
emergency planning and the features of good
evacuation floor plans.
ETOS-3006 / 1 session / $150
>63846
Tue 8am-12pm
Aug 11
Kirkwood Continuing Education Training Center 1118
>63821 Tue/Wed/Thu/Fri 8am-5pm Nov 10-Nov 13
Kirkwood Continuing Education Training Center 1118
7300 Understanding OSHA PermitRequired CSP
502 Update for Construction Industry
Outreach Trainers
510 Occupational Safety and Health
Standards for the Construction Industry
This course is designed for personnel in the
private sector who have completed OSHA
500 Trainer Course in OSHA Standards for
the Construction Industry and who are active
trainers in the outreach program. It provides an
update on such topics as OSHA construction
standards,
policies
and
regulations.
Prerequisites: OSHA 500 course. NOTE:
Outreach trainers are required to attend this
course once every four years to maintain their
trainer status. Students must bring their current
trainer’s card for validation.
ETOS-3002 / 3 sessions / $599
>63840 Tue/Wed/Thu/Fri 8am-5pm Jul 7-Jul 10
>63832 Wed/Thu/Fri 8am-5pm
Kirkwood Continuing Education Training Center 1118
Oct 21-Oct 23
Kirkwood Continuing Education Training Center 1118
This course is for private sector personnel
and covers OSHA policies, procedures, and
standards, as well as construction safety
and health principles. Topics include scope
and application of the OSHA construction
standards. Special emphasis is placed on those
areas that are the most hazardous, using OSHA
standards as a guide. Current 29 CFR 1926 will
be provided.
ETOS-3004 / 4 sessions / $749
>73577 Tue/Wed/Thu/Fri 8am-5pm Oct 6-Oct 9
Kirkwood Continuing Education Training Center 1118
>63841 Tue/Wed/Thu/Fri 8am-5pm Jan 12-Jan 15
Kirkwood Continuing Education Training Center 1118
4
Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
This one-day course covers OSHA’s stringent
guidelines concerning confined space areas.
OSHA’s Standard 1910.146 requires employers
to develop and implement a comprehensive
program to minimize risk when working in
confined spaces. Topics include understanding
the standard, hazard identification and control,
designing and implementing a permit program,
and discussion of emergency procedures.
ETOS-5022 / 1 session / $225
>63866
Fri 8am-5pm
Sep 25
Kirkwood Continuing Education Training Center 1118
Continuing Education | Kirkwood Community College
7500 Introduction to Safety and Health
Management
This one-day seminar focuses on an effective
implementation of a company’s safety and
health management system. This workshop
addresses the four core elements of an
effective safety and health system and central
issues that are critical to each element’s proper
management.
ETOS-5025 / 1 session / $225
>63870
Thu 8am-5pm
Oct 15
Kirkwood Continuing Education Training Center 1118
7505 Introduction to Accident
Investigation
This is an introduction to basic accident
investigation procedures that describe accident
analysis techniques. The goal of the course is to
help employees gain the basic skills necessary
to conduct an effective accident investigation at
their workplace.
ETOS-5026 / 1 session / $225
>63880
Tue 8am-5pm
Oct 13
Kirkwood Continuing Education Training Center 1118
7845 Record Keeping Rule Seminar
This course is designed to assist employers in
identifying and fulfilling their responsibilities for
posting certain records, maintaining records of
illness and injuries, and reporting specific cases
to OSHA. Look at what makes a reportable case
and the forms you need to be aware of. Several
practice sessions are included.
ETOS-5028 / 1 session / $125
>63886
Tue 8am-12pm
Jul 28
Kirkwood Continuing Education Training Center 1118
>63887
Fri 8am-12pm
Oct 16
Kirkwood Continuing Education Training Center 1118
2016 East Central Iowa
Safet y and Health Conference
The Kirkwood Center, Cedar Rapids, Iowa
February 25, 2016
• Save the Date •
• One-day conference dedicated to meeting the safety
and health training needs of business and industry.
• Networking opportunities with peers across eastern Iowa.
• Vendor expo featuring the latest products and services
in health and safety.
Environmental, Industrial Health and Safety Training | Register online at www.kirkwood.edu/ce
5
6
Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
Continuing Education | Kirkwood Community College
OSHA Compliance
OSHA General Industry Outreach Training
30-hours
Introduction to OSHA
This course is for those with little or no
knowledge of OSHA regulations but who need
this information for their job responsibilities.
Participants will go through the Code of Federal
Regulations (29 CFR 1910) and explanations of
the main standards and their application will be
given.
ETOS-3012 / 1 session / $75
>63848
Mon 8am-12pm
Jul 13
Kirkwood Continuing Education Training Center 1118
>63849
Mon 8am-12pm
Nov 16
This course covers general industry safety
and health principles, OSHA policies and
procedures, and general industry standards.
Special emphasis is placed on the most
hazardous areas using OSHA standards as a
guide. This course is intended for those having
supervision safety responsibility. Participants
who successfully complete the course will
receive a card from OSHA certifying completion
of the course.
ETOS-3016 / 4 sessions / $495
>63862
Fri 8am-5pm
Jul 10-Jul 31
Kirkwood Continuing Education Training Center 1220
Kirkwood Continuing Education Training Center 1118
OSHA General Industry Outreach
Training 10-hours
This course covers general industry safety
and health principles, OSHA policies and
procedures, and general industry standards.
Special emphasis is placed on the most
hazardous areas using OSHA standards as a
guide. Participants who successfully complete
the course will receive a card from OSHA
certifying completion of the course.
ETOS-3013 / 2 sessions / $180
>63852 Thu/Fri 8am-3:30pm
“I really enjoyed the class.
Learning hazmat
was interesting.”
– Nick Scott
Forklift Train the Trainer Course
This course was developed for the experienced
forklift operator who has a desire or need to
train others in forklift operations. Curriculum
was developed using OSHA 1910.178. This six
hour course will instruct prospective trainers
on best teaching practices and classroom
management. The instructor will provide a
combination of teaching techniques, including
PowerPoint lecture, in-house developed video
presentation, group discussion on specific
safety issues, and hands-on evaluations.
Trainers will receive a trainer’s manual providing
guidance on conducting training, videos for
visualizing training, PowerPoint presentations
highlighting key areas of the course, skills
evaluation
performance
worksheets
for
evaluating students, and written tests for
measuring learning. Participants must be 18
years old to take this course. Prerequisites:
Student must have prior forklift operator training
and must bring their current operator’s license
to class.
CTTK-1605 / 1 session / $449
>63827
Mon 8am-2pm
Jul 20
Kirkwood Continuing Education Training Center 1220
>63828
Sat 8am-2pm
Aug 8
Kirkwood Continuing Education Training Center 1220
>63829
Mon 8am-2pm
Oct 19
Kirkwood Continuing Education Training Center 1220
Jul 16-Jul 17
Sat 8am-2pm
Jan 23
Kirkwood Continuing Education Training Center 1118
>72921
>63853 Mon/Tue 8am-3:30pm
Kirkwood Continuing Education Training Center 1220
Sep 21-Sep 22
Kirkwood Continuing Education Training Center 1118
>73578 Mon/Tue 8am-3:30pm
Nov 2-Nov 3
Kirkwood Continuing Education Training Center 1118
>72926 Wed/Thu 8am-3:30pm
Jan 20-Jan 21
Kirkwood Continuing Education Training Center 1118
OSHA Construction Industry Outreach
Training 10-hours
This course covers construction safety and
health principles, OSHA policies and procedures,
and construction industry standards. Special
emphasis is placed on the most hazardous
areas using OSHA standards as a guide.
Participants who successfully complete the
course will receive a card from OSHA certifying
completion of the course.
ETOS-3014 / 2 sessions / $180
>63860
Thu/Fri 8am-3:30pm
Jul 23-Jul 24
Kirkwood Continuing Education Training Center 1118
>63859
Wed/Thu 8am-3:30pm
Sep 23-Sep 24
Kirkwood Continuing Education Training Center 1118
>63861
Wed/Thu 8am-3:30pm
Power Industrial Forklift Operations
This class includes a classroom presentation,
hands-on training and testing in various types
of lifts, power lifts, lift-truck operations and
inspection of lift trucks. Participants receive
certification meeting OSHA requirements upon
successful completion. Participants must be 18
years old to take this course.
CTTK-1600 / 1 session / $199
>59675
Sat 8am-2pm
Jul 18
Kirkwood Continuing Education Training Center 1220
>59676
Sat 8am-2pm
Aug 15
Kirkwood Continuing Education Training Center 1220
>65272
Sat 8am-2pm
“Loved the
hands-on training.”
– Andrew Schultz
Sep 19
Kirkwood Continuing Education Training Center 1234
>65273
Sat 8am-2pm
Oct 17
Kirkwood Continuing Education Training Center 1234
>65274
Sat 8am-2pm
Nov 14
Kirkwood Continuing Education Training Center 1234
>72927
Fri 8am-2pm
Jan 22
Kirkwood Continuing Education Training Center 1220
Nov 18-Nov 19
Kirkwood Continuing Education Training Center 1118
Environmental, Industrial Health and Safety Training | Register online at www.kirkwood.edu/ce
7
Directions to Campus from
Interstate 380:
Cedar Rapids Hotels
The Hotel at Kirkwood Center
7725 Kirkwood Boulevard SW, Cedar Rapids
319-848-8700
Budget Inn
3100 16th Avenue SW, Cedar Rapids
319-363-8101
Clarion Hotel
525 33rd Avenue SW, Cedar Rapids
319-366-8671
Hampton Inn of Cedar Rapids
3265 6th Street SW, Cedar Rapids
319-364-8144
Holiday Inn Express Hotel & Suites
3320 Southgate Court SW, Cedar Rapids
319-399-5025
Hometown Inn & Suites
3315 Southgate Court SW, Cedar Rapids
319-362-9012
Motel 6
3325 Southgate Court SW, Cedar Rapids
319-366-7523
Quality Inn South
390 33rd Avenue SW, Cedar Rapids
319-363-7934
Red Roof Inn
3243 Southridge Drive SW, Cedar Rapids
319-364-2000
Super 8 Cedar Rapids
720 33rd Avenue SW, Cedar Rapids
319-362-6002
1. Take the Kirkwood/Highway 30 exit.
2. Take the Kirkwood Boulevard exit.
3. Go north on Kirkwood Boulevard
approximately .6 miles.
4. The entrance is on the left.
The Kirkwood Community College main
campus covers 885 acres of Iowa
countryside located near the intersection of
I-380 and Highway 30 on the southern edge
of Cedar Rapids.
Maps
965
50th Ave. SW
C Street SW
Bowling St. SW
J St. SW
6th Street SW
Exit 16
N
Kirkwood Continuing
Education Training Center
101 50th Ave. SW
Exit 253
Exit 254
254 A South
254 B North
Exit 16A
C Street SW
Kirkwood Blvd. SW
Ely Road SW
6th Street SW
66th Ave. SW
Kirkwood Main Campus
6301 Kirkwood Blvd. SW
76th Ave.
Wright Brothers Blvd. SW
965
Exit 13
C Street SW
Kirkwood Blvd. SW
6th Street SW
Eastern Iowa Airport
84
MK 5/13
Registration Information
Register Now!
319-398-1022 or 1-800-332-8833
With four easy ways to register.
MANY CLASSES HAVE LIMITED SEATING. REGISTER EARLY!
MasterCard, VISA or Discover Card accepted.
By Phone ­—Tell Our Operators:
Online:
Log on to www.kirkwood.edu/ce.
1. The class numbers from this catalog.
2. Your credit card/debit card number and expiration date.
By Fax— 319-398-7185
By Mail:
1. Fill out the enclosed enrollment form and credit card/debit card
number, or enclose check.
2. For company billings, please include name, address,
phone number and appropriate signature.
Make Check Payable to Kirkwood Community College:
1. Pay the amount under “tuition” only.
2. Write name of person and class number on check.
3. Send to: Continuing Education, Kirkwood Community College
P.O. Box 2068
Cedar Rapids, IA 52406
Last
Payment must be made at the time of registration.
First
Fax enclosed enrollment form with credit card/debit
card number or company billing information.
Refunds: An automatic refund is made if Kirkwood cancels a class. To withdraw your registration before a class
starts, please call 319-398-1022 or 1-800-332-8833.
Refunds will be issued to students who drop the class
at least one business day prior to the class start date.
No refunds will be issued for classes dropped on or after
the class start date.
Kirkwood Community College Continuing Education is pleased to
welcome learners of all ages. However, learners under the age of
17 wishing to enroll in non-youth courses should seek permission
from the program director. Please phone 319-398-5529.
Middle Initial
Non-Profit Organization
U.S. Postage
PAID
Cedar Rapids, Iowa 52406
Permit No. 94
Continuing Education
Kirkwood Community College
6301 Kirkwood Blvd. SW
Cedar Rapids, Iowa 52404
Hazardous Materials
Confined Space
DOT Training
OSHA Education
Center
OSHA Compliance
Find it all inside.
10
Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.