TM
RAPID SEAM
MAX 10 YR GUARANTEE
ROOF PROJECTION
R
EVERGUARD PREMOLDED
SEALANT POCKET
PRIME INSIDE OF TPO SEALANT
POCKET
R
EVERGUARD POURABLE SEALANT
OR TOPCOAT FLEXSEAL SEALANT
QUICK SET NON-SHRINK GROUT IN
POCKET UNDER SEALANT
HEAT WELD FLANGE MIN. 2"
TM
MINIMUM 4 DRILL-TEC SCREWS
& PLATES
R
EVERGUARD FREEDOM
MEMBRANE
TM
ENERGYGUARD ROOF
INSULATION
ROOF DECK/SUBSTRATE
NOTE:
1. ALLOW 2" CLEARANCE AROUND THE PROJECTION. IF MULTIPLE PROJECTIONS, ALLOW 1" BETWEEN
PROJECTION AND BOX.
2. THE EXISTING PROJECTION MUST BE CLEAN OF ALL DEBRIS BEFORE INSTALLATION.
R
3. PREFABRICATED POURABLE SEALANT POCKET MUST BE PRIMED WITH EVERGUARD TPO PRIMER
4. IF SEALANT POCKET MUST BE CUT, STRIP IN CUT WITH UNREINFORCED TPO STRIP MIN 4" WIDE
AND RUN OUT ONTO DECK SHEET MINIMUM 2".
5. IF PLATES AND FASTENERS ENCROACH INTO THE SEAM AREA OF THE POCKET, THEN A TARGET
MUST BE ADDED FIRST TO COVER FASTENERS.
6. APPLY EVERGUARD R TPO CUT EDGE SEALANT TO ALL CUT REINFORCED TPO EDGES
TM
( REFER TO DETAIL FD 115 ) AND ALL RAPIDSEAM SEAMS.
DRAWING #
POURABLE SEALANT POCKET
ROOF PENETRATION
SERIES
HEATWELD & RAPIDSEAM
SYSTEM
525
FD
SCALE
ISSUE/ REVISION DATE
N.T.S.
3-1-10