GAF TPO Accessories
EverGuard TPO Drain
(COMEG168)
Updated: 4/14
Preflashed
Accessories
Description
EverGuard® TPO single-ply roofing
system preflashed accessories
provide roofing contractors an
easy-to-install, factory-built detail.
EverGuard® preflashed accessories
are constructed using GAF’s proven,
durable EverGuard® TPO single-ply
detailing membrane.
• Cost effective… Reduces installed
costs by up to 25%
• Improved Reliability… Factorybuilt accessories reduce risk of
leaks and callbacks
• Improved aesthetics… Uniform look
Application
EverGuard® TPO preflashed
accessories are designed for
use with GAF EverGuard® TPO
single-ply membranes and
EverGuard® Freedom™ TPO
self-adhering membranes. The
preflashed accessories may be
installed on mechanically attached,
fully adhered, or self-adhered
EverGuard® TPO roofing systems.
Preflashed accessories are installed
using conventional techniques.
See published application and
specifications manual for detailed
instructions.
Product Information
EverGuard® preflashed TPO
Drains are constructed from spun
aluminum and preflashed using
EverGuard® 55 mil detailing
membrane. No special tools
needed for installation. Wide
range of sizes allows for proper
fit into any size roofing drain.
All hardware, including strainer
and gravel guard, are included
with drains. EMSEAL watertight
expanding seal for retrofit drains
is included, making plumbing tie-in
quick and easy.
Also Available...
gaf.com
Fluted Corner
Inside Corner
TPO Drain
Recommended Uses
• Whole-sized Drains (2”, 3”, 4”, 5” or 6”)
can be used on new construction and directly
attached to new plumbing with a flexible
coupling (not included).
• Half-inch-sized Drains (1 1/2”, 2 1/2”, 3 1/2”,
4 1/2”, and 5 1/2”) can be used as retrofit
drains by ordering a drain sized 1/2” smaller
than the drain pipe being fitted (for a 4” drain
pipe, use a 3 1/2” drain).
Vent Boot
Universal Corner
Vent
©2014 GAF • 4/14 • #468
COMEG168