Data Sheet MEUKG2ENb
UltiKleen™ G2 Filter
Description
The UltiKleen G2 filter is an advanced all-fluoropolymer
cartridge designed specifically for use in critical chemical
filtration. The filter uses a pure unmodified PTFE membrane
with guaranteed levels of metal ion extractable and particle
cleanliness.
The patented Ultipleat® filter design maximizes filter area to provide
high flow capacity in a compact filter size. The large filter area
ensures long service life.
Features & Benefits
• All-fluoroploymer construction
– Suitable for use with aggressive, high-temperature
chemicals
• Optimized Ultipleat construction
– Increased flow and long service life improves COO
• Low extractables
– Maintains chemical purity and can shorten
qualification time
• Pre-wet option
– Eliminates need for pre-wetting for safer and faster
changes
• 100% integrity tested
– Assures product performance for every filter
• Multiple removal ratings and lengths
– Provides options for different flow rate and particle
removal needs
Specifications*
Materials of Construction
Components
Filter Medium
Materials
PTFE
Media Support
PTFE
Core
PFA
Cage
PFA
End Caps
PFA
Sealing Methods
Heat Melt Seal
O-ring
FEP encapsulated
fluoroelastomer
* All fluoropolymer materials made without PFOA.
Removal Ratings and Operating Conditions
Removal Ratings
0.2 µm, 0.1 µm, 0.05 µm
Configurations
AB1
AB2
AB3
Filter Areas
2.2 m2 / 23.7 ft2
4.4 m2 / 47.4 ft2
36.6 m2 / 71.0 ft2
Nominal Length
254 mm / 10 in.
508 mm / 20 in.
762 mm / 30 in.
Maximum Operating Temperature
170°C / 338°F
Maximum Forward Differential Pressure
0.59 MPa < 50°C / 86 psid < 122°F
Pressure Drop vs. Liquid Flow Rate (Water, 20˚C) 1
ABFG ( 254 mm / 10 in type )
Flow rate (gpm)
1
2
3
4
5
6
7
8
9
10
0.05 µm
(UCFD)
3
20
0.10 µm
(UCFT)
2
10
1
0.20 µm
(UCFR)
0
1
4
0
0
5
10
15
20
25
30
35
Clean pressure drop (psi)
Clean pressure drop (kPa)
30
0
Typical flow rates. For liquids with viscosity differing from water,
multiply the pressure drop by the viscosity in centipoise.
Unit conversion: 1 bar = 0.1 MPa
40
Flow rate (L/min)
Dimensions
Max
83 mm
3.3 in
Part Numbers 2 / Ordering Information
ABFG 1
Code
UCF 2 L3EH1 3
Cartridge Length
Nominal
L
1
10
244 mm / 9.6 in
2
20
487 mm / 19.2 in
3
30
726 mm / 28.6 in
Code Removal
Ratings
Code
Prewet Option
D
0.05 µm
-K3
Prewet filter (packaged in DI water)
T
0.1 µm
-K7
R
0.2 µm
Prewet filter (packaged in DI water), Low metal
extractables 3
2
Part numbers are not always available in combinations with all codes. Please contact Pall for part number availability.
3
Please contact Pall on the extractable conditions.
Microelectronics
25 Harbor Park Drive
Port Washington, NY 11050
+1 516 484 3600
telephone
+1 800 360 7255
toll free US
Microelectronics@pall.com
Nihon Pall Ltd.
6-5-1, Nishishinjuku,
Shinjuku-ku
Tokyo 163-1325 Japan
+81 3 6901 5700
telephone
+81 3 5322 2109
fax
Visit us on the Web at www.pall.com/micro
Pall Corporation has offices and plants throughout the world. For Pall representatives in your
area, please go to www.pall.com/contact.
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without
notice. Please consult your Pall representative or visit www.pall.com to verify that this
information remains valid. Products in this document may be covered by one or more
of the following patent numbers: US 5,543,047; US 5,690,765; US 6,113,784;
US 7,083,564; US 7,318,800; EP 0 982 061; EP 0 667 800; EP 1 380 331.
© Copyright 2012, 2015 Pall Corporation. Pall,
, and UltiKleen are trademarks of Pall Corporation.
® indicates a trademark registered in the USA. Filtration. Separation. Solution. is a service mark of Pall
Corporation.
MEUKG2ENb
September 2015