CAD12 Controlled Access Design Key Features Control access design closures for buried cable plants. nLift-off front covers provide 180˚ access to facilitate the enclosure installation Description nRemovable lower front cover and service wire channel allow additional cable and wire placement without disturbing existing plant nSwing-out locking divider plate provides positive grounding of all components nLarge capacity permits greater access to cable conductors nMay be self-supporting, stake, joint, pole or wall-mounted for flexible installation capabilities The CAD12 (Controlled Access Design) enclosure is a round-cornered square-design telephone distribution, splice, or cross-connect pedestal. The CAD12 has 360° access for easy installation of larger pair counts. The CAD12 provides a fixed-count terminal point for terminating aerial and buried plant. Included in the CAD12 is a universal mounting plate with attached service wire bonding bracket, grounding connector, flexible bonding braid, dielectric shield, and mounting stakes. Application CAD12 enclosures are universal above-ground housings for distribution, splicing, or crossconnecting buried cable plant. The CAD12 provides either fixed-count or preferredcount terminations of aerial, buried, block, and station wires. It can also house limited cross-connect fields for rural interface applications. Also, the CAD12 houses aboveground straight and branch splices in cables and splice cases. It provides a splicing location between buried and lateral runs to aerial cable facilities. CAD12 023700D-CAD12 / 0314 1 CAD12 Controlled Access Design Dimensions Catalog Number CAD12 Dimensions A 50-5/16-in. B 23-5/8 -in. C 25-15/16-in. D 12-7/8-in. W 12-7/8-in. Specifications Catalog No. CAD12 — Spliced Pairs — Using Any Connector 1500 — Cross-Connect Capacity — Feeder Distribution 25 pair 25 pair Note: Total number of pairs spliced is dependent on connector use and local practices. RGT & RPT Style Terminal Blocks (Unprotected) Catalog Number CAD12 6-Pr. 145 6 12-Pr. RGT12/RPT12L 2 25-Pr. RGT/RPT25 2 A-Line Style Terminal Blocks Catalog No. CAD12 — Unprotected — RGT/RPT10A RGT/RPT25A 2 2 RPT5A 2 — Protected — RPT10A RGT/RPT25A 2 2 Ordering Information Catalog Number CAD12 Part Number F604530 Description 12-in. gray-green pedestal with divider plate EmersonNetworkPower.com/EnergySystems (North America) EmersonNetworkPower.eu/EnergySystems (EMEA) © Emerson Network Power, Energy Systems, North America, Inc. 2014. Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson™ and Consider it Solved are service marks and trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson Network Power, Energy Systems, North America, Inc. Any other product, brand, or company names or logos are the property of the respective owner. 2 While every precaution has been taken to ensure accuracy and completeness herein, Emerson Electric Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice. 023700D-CAD12 / 0314