Technical Data Sheet
CC61A
Pall PharmAssure Pharmacy Filtration Devices
Syringe Filter (25 mm)
Pore Size Availability
0.2 µm, 0.45 µm, 0.8 µm, 1.2 µm, 5 µm
Housing
Acrylic
Membrane
Supor (hydrophilic polyethersulphone)
Effective Filtration Area
2.8 cm2
Connections
ISO Female Luer Lock Inlet
ISO Male Luer Lock Outlet
Priming Volume
<0.85 mL
Typical Fluid Retention
(with air purge)
<50 µL
Recommended Filtration Volume
<100 mL
Maximum Operating Temperature
55°C
Maximum Operating Pressure
75 psi (5.2 bar)
Endotoxin Level
<0.25 EU/mL (Limulus Amoebocyte Lysate (LAL) test)
Biocompatibility
Components in fluid pathway meet USP Biological
Reactivity Testing in vivo <88>
Sterilisation Method
Gamma irradiation
Typical Water Flow Rate at 45 psi (3.1 bar)
Reorder Information
Product Code
Pore Size Colour
Packaging
HP1002
180 mL/min
HP1004
300 mL/min
HP1002
0.2 µm
Blue/Blue
50/pkg
HP1008
700 mL/min
HP1004
0.45 µm
Red/Clear
50/pkg
HP1012
1000 mL/min
HP1008
0.8 µm
HP1050
1500 mL/min
HP1012
1.2 µm
HP1050
5 µm
Clear/Green 50/pkg
Clear/Blue
50/pkg
Green/Green 50/pkg
Europa House, Havant Street
Portsmouth PO1 3PD, England
Visit us on the web at www.pall.com
+44 (0)23 9230 3452
+44 (0)23 9230 3541
Biosvc@Pall.com
International Offices
Pall Corporation has offices and plants throughout the world in locations such as: Argentina, Australia, Austria,
Belgium, Brazil, Canada, China, France, Germany, Hong Kong, India, Indonesia, Ireland, Italy, Japan, Korea,
Malaysia, Mexico, the Netherlands, New Zealand, Norway, Poland, Puerto Rico, Russia, Singapore, South
Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, the United Kingdom, the United States and Venezuela.
Distributors in all major industrial areas of the world.
This document is not for distribution in the USA and Canada.
telephone
fax
E-mail
The information provided in this literature was reviewed for accuracy at the time of publication. Product data
may be subject to change without notice. For current information consult your local Pall distributor or
contact Pall directly. Part numbers quoted above are protected by the Copyright of Pall Europe Ltd.
, Pall and PharmAssure are trade marks of Pall Corporation
Filtration. Separation. Solution. is a service mark of Pall Corporation
©2000, 2001 Pall Europe Limited
Printed in England. PMED/2M/DBD/0203
Technical Data Sheet
CC61A
Pall PharmAssure Pharmacy Filtration Devices
Syringe Filter (32 mm)
Pore Size Availability
0.2 µm, 0.45 µm, 1.2 µm, 5 µm
Housing
Acrylic
Membrane
Supor (hydrophilic polyethersulphone)
Effective Filtration Area
5.3 cm2
Connections
ISO Female Luer Lock Inlet
ISO Male Luer Lock Outlet
Priming Volume
<1.0 mL
Typical Fluid Retention
(with air purge)
<100 µL
Recommended Filtration Volume
<150 mL
Maximum Operating Temperature
55°C
Maximum Operating Pressure
75 psi (5.2 bar)
Endotoxin Level
<0.25 EU/mL (Limulus Amoebocyte Lysate (LAL) test)
Biocompatibility
Components in fluid pathway meet USP Biological
Reactivity Testing in vivo <88>
Sterilisation Method
Gamma irradiation
Typical Water Flow Rate at 45 psi (3.1 bar)
Product Code Pore Size
Colour
Packaging
700 mL/min
HP4642
0.2 µm
Blue/Blue
50/pkg
1700 mL/min
HP4644
0.45 µm
Red/Clear
50/pkg
1750 mL/min
HP4648
1.2 µm
Clear/Blue
50/pkg
HP4640
5 µm
HP4642
490 mL/min
HP4644
HP4648
HP4640
Reorder Information
Green/Green 50/pkg
Europa House, Havant Street
Portsmouth PO1 3PD, England
Visit us on the web at www.pall.com
+44 (0)23 9230 3452
+44 (0)23 9230 3541
Biosvc@Pall.com
International Offices
Pall Corporation has offices and plants throughout the world in locations such as: Argentina, Australia, Austria,
Belgium, Brazil, Canada, China, France, Germany, Hong Kong, India, Indonesia, Ireland, Italy, Japan, Korea,
Malaysia, Mexico, the Netherlands, New Zealand, Norway, Poland, Puerto Rico, Russia, Singapore, South
Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, the United Kingdom, the United States and Venezuela.
Distributors in all major industrial areas of the world.
This document is not for distribution in the USA and Canada.
telephone
fax
E-mail
The information provided in this literature was reviewed for accuracy at the time of publication. Product data
may be subject to change without notice. For current information consult your local Pall distributor or
contact Pall directly. Part numbers quoted above are protected by the Copyright of Pall Europe Ltd.
, Pall and PharmAssure are trade marks of Pall Corporation
Filtration. Separation. Solution. is a service mark of Pall Corporation
©2000, 2001 Pall Europe Limited
Printed in England. PMED/2M/DBD/0203