LMOHP 10-09.qxd:IOL 6/04
10/7/09
2:18 PM
Page 1
Data Sheet 1732-12C
LMO High Pressure Series
Filter Housings
Accepts 10 in (25.4 cm) or 20 in (50.8 cm) Double
Open End Filter Cartridges
• Designed and constructed specifically for high pressure
applications (750 or 1000 PSIG)
• Standard multi-bolt closure design provides safe,
trouble-free sealing
• In-line inlet and outlet connections ensure easy installation
• Eye nut and flange options available
• Not for use with non-compressible filter cartridges such as
pleated, carbon, metallic, and membrane.
For non-compressible cartridges use the LMOVS-HP/VHP
Series housings.
Housing Specifications
Maximum Operating Pressure:
HP: 750 psig (51.7 bar) @ 250°F (121°C)
VHP: 1000 psig (69 bar) @ 250°F (121°C)
Material of Construction:
316 Stainless Steel
Connections:
⁄4" NPT
lnlet/Outlet:
3
Drain:
1
Shell O-rings:
Ethylene Propylene (standard), Nitrile, FEP,
⁄4" NPT
Fluorocarbon Elastomer, Neoprene,
Silicone Elastomer
Eye Nut Option:
Zinc plated steel eye nuts are available. Four eye nuts
(Part #T10640030) are required. Standard units are supplied
with hex nuts.
Flange Option:
LMOHP housings are available with 3⁄4" welded flanges.
LMOHP 10-09.qxd:IOL 6/04
10/7/09
2:18 PM
Page 2
Dimensional Data (nominal)
Model
Flow Rate1
gpm
Dimensions (inches)
A
B
Weight
(pounds)
LMO10S – 3⁄4 HP
to 10 (37.9 lpm)
13 (33 cm)
4 3⁄8 (11.1 cm)
10 (4.5 kg)
LMO20S – 3⁄4 HP
to 20 (75.7 lpm)
23 (58.4 cm)
4 3⁄8 (11.1 cm)
13 (5.9 kg)
LMO10S – 3⁄4 VHP
to 10 (37.9 lpm)
13 (33 cm)
4 3⁄8 (11.1 cm)
10 (4.5 kg)
LMO20S – 3⁄4 VHP
to 20 (75.7 lpm)
23 (58.4 cm)
4 3⁄8 (11.1 cm)
13 (5.9 kg)
Dependent upon cartridge selection, fluid viscosity, and allowable pressure drop.
TOP VIEW
SIDE VIEW
Housing Differential Pressure vs. Liquid Flow Rate
Flow Rate (lpm)
B
8
0
Head
Shell
O-ring
Lockring
Hex Bolt
16
24
0.5
0.03
B
Centering
Spring
A
Shell
Filter
Cartridge
Differential Pressure (psid)
0.45
0.4
0.35
0.02
0.3
0.25
0.2
0.01
0.15
0.1
0.05
0
Center Bolt
0
1
2
3
4
5
6
7
Bar (x100 = kPa)
1
8
Flow Rate (gpm), Water at 68°F (20°C)
For liquids other than water, multiply differential
pressure by specific gravity.
Seat Plate
Drain Plug
Part Numbers/Ordering Information
LMO ● S – 3⁄4 ▼ ✪ (e.g., LMO10S–3⁄4FHP)
Code
●
10
20
Cartridge
Lengths
10"
20"
Code
▼
Blank
F
Connection
Styles
NPT
Flange
25 Harbor Park Drive
Port Washington, NY 11050
+1 516 484 3600 telephone
+1 800 289 7255 toll free US
Code
✪
HP
VHP
Pressure
Rating
750 psig @250˚F
1000 psig @250˚F
Visit us on the Web at www.pall.com
Pall Corporation has offices and plants throughout the world. For Pall representatives
in your area, please go to www.pall.com/contact.
Please contact Pall Corporation for product applicability to specific National legislation
and/or Regional Regulatory requirements for water and food contact use.
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without
notice. Please consult your Pall representative or visit www.pall.com to verify that
this information remains valid.
© Copyright 2009, Pall Corporation. Pall and
® Indicates a trademark registered in the USA.
of Pall Corporation.
1732-12C
are trademarks of Pall Corporation.
is a service mark
October 2009