Data Sheet PICOREENd
Profile® Coreless Filter Elements
Profile Coreless filter elements combine Pall proven
Profile depth filter technology with a design that
eliminates the core to provide a convenient, cost
efficient and environmentally-friendly solution for
high flow rate applications.
The large diameter filter element features low differential
pressure polypropylene, nylon or polyphenylene sulphide
(PPS) medium, meaning fewer elements are required for a
given flow rate. Filter vessels are correspondingly smaller,
resulting in lower capital and installation costs, as well as
reduced operating costs.
Convenience
The Profile Coreless filter element fits over a 316L stainless
steel core, which is retained inside the filter housing.
At changeout, the element is simply pulled up over the
core which is then ready to accept the replacement
element. By retaining the metallic core, the Coreless
design significantly reduces the amount of waste material
to dispose of, providing a lower cost, more
environmentally-friendly option.
Profile Coreless Filter Element
Efficiency
Features
Profile Coreless filter elements use the advanced and
proven benefits of Profile medium’s unique depth filter
technology. The combination of a continuous graded pore
prefilter section and a high performance inner section is an
ideal combination, giving low clean differential pressure,
high liquid flow rates and long service life.
• Large diameter cartridge utilizing low differential
pressure media.
Quality
• Polypropylene, nylon or polyphenylene sulphide (PPS)
filter media.
The Profile Coreless filter element is manufactured to a very
high standard of quality assurance and cleanliness, and in
accordance with BS EN ISO 9001:2008.
• Fully disposable design.
Materials of Construction
• Smaller systems with low capital cost, low installation
costs and reduced operating costs.
Filter Element
Polypropylene, Nylon or
Polyphenylene Sulphide (PPS)
Core Assembly
316L Stainless Steel
• Separate stainless steel core retained in the
filter housing.
• Proven depth filter technology / continuous graded
pore structure.
Benefits
• Providing high liquid flow rate capability, ease of fitment,
low operating costs and increased cost efficiency.
• Reliable, consistent and verifiable filtration performance.
• Compatible with a wide range of applications.
• Less waste materials, lower cost of disposal and more
environmentally-friendly.
Technical Information
Core Assembly Seals (removable option only)
Operating Characteristics in Compatible Fluids1
Maximum
Differential Pressure
4.0 bard (58 psid)
1.0 bard (14.5 psid)
1
Operating Temperature
Polypropylene
Nylon
30 °C (86 °F)
82 °C (179.6 °F)
32 °C (89.6 °F)
130 °C (266 °F)
Seal Material
Ethylene Propylene Rubber (EPR)
Fluorocarbon Elastomer
FEP encapsulated Fluorocarbon Elastomer
Nitrile
Polyphenylene
Sulphide (PPS)
20 °C (68 °F)
204 °C (400 °F)
Compatible fluids are defined as those which do not swell, soften or attack any of the filter components
Flow Rates
Air Flow (Aft3/sec) (1016 mm / 40” Element)
0
300
Y05
400
0
10
-N
00 N200
Y1
0
0
500
6.0
Y20
300
0
200
FPS
200
3.0
00
Y400 - N4
100
FPS500
4.5
1.5
YE
YM, YN, NM
0
0
200
400
600
800
1000
3.5
7
11
14
17.5
1200
1.8
120
Y100
1.5
100
* For clean water at ambient temperature for liquids
of viscosity other than 1cP multiply the ¢ P by the
viscosity in cP.
0
2.1
140
Liquid Flow (L/min)
Air Flow (Aft3/sec) (508 mm / 20” Element)
21
80
1.2
60
0.9
Y400
40
0.6
20
0.3
0
0
0.1
0.2
0.3
0.4
0.5
Code
Description
2
4
508 mm (20")
1016 mm (40")
3.5
4.2
1.5
1.2
0.9
60
FPS200
0.6
40
FPS500
20
0
0.02
0.04
0.06
0.08
0.3
0
0.12
0.1
* For air at viscosity of 0.018cp. Correction for
other gases: Use reading from Graph x
0
0.6
Gas Viscosity
= Actual Pressure Drop
0.018cP (Air)
EHS 60
Table 1
Table 1 Table 2
Table 1: Nominal Length
2.8
FPS100
Core Assembly (removable option) Part Number:
E 60
2.0
Air Flow (Am3/sec)
This information is a guide to the part number structure and possible options. For availability of specific
options, please contact Pall. Refer to Pall for housing details.
Element Part Number:
1.4
80
0
Air Flow (Am3/sec)
Ordering Information
0.7
100
Differential Pressure (psid)
250
Differential Pressure (mbard)
200
Differential Pressure (mbard)
150
Differential Pressure (psid)
100
FP
S1
0
Differential Pressure (mbard)
50
Differential Pressure (psid)
Liquid Flow (USgpm) (1016 mm / 40” Element)
Table 3
Table 2: Media Options
Polypropylene2
Nylon2
Polyphenylene3
Sulphide (PPS)
Removal Rating in
Liquids (µm)
Removal Rating in
Gases at 0.3 µm4
Y050
—
—
5
Table 3: Core Assembly Seal Options
Y100
N100
FPS100
10
Code
Description
J
HB
Ethylene Propylene Rubber
Fluorocarbon Elastomer
Y200
Y400
—
N200
N400
—
FPS200
—
FPS500
20
40
50
—
99.997 % (Y100)
99.999 % (FPS100)
—
99.995 % (Y400)
99.869 % (FPS500)
H1
FEP encapsulated
Flurocarbon Elastomer
H13
Nitrile
YE5
YM5
YN5
—
NM
—
—
—
—
Coarse grade media for use in E-coat paint baths
Coarse grade media for use in mica paint applications
Coarse grade media for use in mica paint applications
2
5
Beta 5000, 3 Beta 1000 efficiency rating, 4 Determined in laboratory trials using sodium chloride aerosols at 300 Sm3 / hr,
Profile Coreless paint application filter elements are not given removal ratings.
Replacement Core Assembly Seals
O-ring Seal
Ethylene Propylene Rubber (EPR)
Fluorocarbon Elastomer
FEP encapsulated Fluorocarbon Elastomomer
Nitrile
Part Number
CA53418 and ORJPW-111P
LS00372 and LS00429
CC62592 and CC62591
LS0043 and LS543
Pall Industrial
Visit us on the Web at www.pall.com
25 Harbor Park Drive
Port Washington, NY 11050
+1 516 484 3600
telephone
+1 888 333 7255
toll free US
Pall Corporation has offices and plants throughout the world. For Pall representatives
in your area, please go to www.pall.com/contact
Portsmouth - UK
+44 (0)23 9230 2374 telephone
+44 (0)23 9230 2507 fax
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without notice.
Please consult your Pall representative or visit www.pall.com to verify that this
information remains valid. Products in this document may be covered by one or more
of the following patent numbers: EP 433,661.
© Copyright 2010, Pall Corporation. Pall,
, and Profile are trademarks of Pall Corporation.
® Indicates a trademark registered in the USA. Filtration. Separation. Solution.SM is a service mark
of Pall Corporation.
PICOREENd
Printed in the UK.
August 2010