2014-2015 Associate in Applied Technology Degree Worksheet
Welding Technologies
Name _______________________________ SID ______________ Date _________ Advisor ______________________
The Welding Technology program prepares students for entry-level welder employment in production, job shop, or maintenance
positions. Students master basic and advanced welding skills while operating industry-quality, state-of-the-art equipment.
Program Distribution
General Education Requirements - 15 credits
Courses listed below must be completed with a “C” or better.
Major Area Requirements - 90 credits
Courses listed below must be completed with a “C” or better.
• Communication Skills — 5 credits
• Computational Skills — 5 credits
• Human Relations — 5 credits
TOTAL
NEEDED
0
Advising Notes & Degree Requirements
• This worksheet is only for advising purposes. Official approval
of credits for degree completion is subject to approval from
the Credential Evaluations Office: credeval@clark.edu
• Consult with an academic advisor on a regular basis for degree
completion planning. Contact the Advising Center to locate an
academic advisor. Call (360) 992-2345 or visit us online at:
www.clark.edu/advising
HLTH 120 Adult CPR and First Aid
1
WELD 102 Introduction to Welding
6
WELD 110 Welding Blueprint Reading
5
WELD 140 Gas Metal Arc Welding
6
WELD 141 Gas Metal Arc Fabrication
6
WELD 142 Flux Core Arc Welding
6
WELD 143 Flux Core Arc Fabrication
6
WELD 144 Shielded Metal Arc Welding
6
WELD 145 Shielded Metal Arc Fabrication
6
WELD 156 Welding Certification
2
WELD 235 Elementary Metallurgy
2
WELD 236 Elementary Metallurgy Lab
2
WELD 240 Gas Tungsten Arc Welding
6
WELD 241 Gas Tungsten Arc Fabrication
6
WELD 242 Advanced Wire Feed Welding
6
WELD 243 Advanced Wire Feed Fabrication
6
WELD 244 Advanced Gas Tungsten Arc Weld.
6
WELD 245 Advanced Gas Tungsten Arc Fabr.
6
• Must earn a cumulative GPA of 2.00 in all coursework taken at
Clark College, and in all courses applied to the degree. Thirty
(30) credits minimum must be completed at Clark College to
meet Academic Residency.
•
TOTAL
NEEDED
0
Courses do not always follow numbering sequence, please
refer to the College Catalog for prerequisites and for info on
quarterly class offerings refer to the Annual Class Planner.
= course that is currently in-progress
TOTAL CREDITS REQUIRED: 105
NEEDS:
0
Student Signature:
Advisor Signature:
Revised 05/20/14
Unofficial Evaluation Given to Student
EPC: 8141
Associate in Applied Technology (AAT)
NOTES:
dŚĞƐƐŽĐŝĂƚĞŝŶƉƉůŝĞĚdĞĐŚŶŽůŽŐLJĚĞŐƌĞĞŝƐĚĞƐŝŐŶĞĚĨŽƌƐƚƵĚĞŶƚƐǁŚŽǁŝƐŚƚŽĐŽŵƉůĞƚĞĂƉƌŽŐƌĂŵ
ǁŝƚŚĂƐƉĞĐŝĨŝĐƚĞĐŚŶŝĐĂůĐĂƌĞĞƌŽďũĞĐƚŝǀĞ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽĐŽŵƉůĞƚĞĂŵŝŶŝŵƵŵŽĨƚŚŝƌƚLJ;ϯϬͿ
ĐƌĞĚŝƚƐĂƚůĂƌŬŽůůĞŐĞƚŽŵĞĞƚĐĂĚĞŵŝĐZĞƐŝĚĞŶĐLJƌĞƋƵŝƌĞŵĞŶƚ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽŵĂŝŶƚĂŝŶ
ĂĐƵŵƵůĂƚŝǀĞ'WŽĨϮ͘ϬϬƚŽƌĞĐĞŝǀĞƚŚŝƐĚĞŐƌĞĞ͘
General Education Requirements Note: Some specific requirements of a program may also meet the General Education requirements. A total of fifteen (15) credits between the three subject areas is required. You may take three (3) to five
(5) credits from the courses listed below in each area of Communication Skills, Computational Skills and
Human Relation, but the combined total needs to equal fifteen (15) credits.
Communication Skills [C] – 5 credits Select a minimum of five (5) credits from the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
• PTWR 135
Computational Skills [CP] – 5 credits Complete five (5) credits from the list below:
• Business – BUS 102
• Business Technology Medical Office – BMED 103, 104
• Math – MATH 103, 105, 111, MATH& 107or any course for which one of these is a prerequisite
• Computer Technology – CTEC 100, 101, 121
Short-Term Plan:
Summer
Summer
Human Relations [HR] – 5 credits Complete five (5) credits from the list below:
• Communication Studies – CMST 216, CMST&210, 230
• Business – BUS& 101
• Human Development – HDEV 105, 123, 155, 186, 195, 198, 200
• Management – MGMT 101, 106, 110, 112, 120, 122, 125, 128, 132
• Psychology – PSYC&100
• Sociology – SOC& 101
• Women’s Studies – WS101
Specific Requirements in an Occupational Field
Students must complete the courses listed in their career plan, plus electives as needed to meet the ninety (90) credit requirement. All Associate in
Applied Technology degree programs require at least seventy-five (75) credits minimum of major-related requirements.