THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 23.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
HERO MOTOCORP LTD.
(www.heromotocorp.com)
Branches of Engineering:
B.E. Mechanical
Eligibility Criteria
10th, 10+2/Diploma
Present CGPA
Process of Interviews:
Online written test
Group Discussion
Psychometric Test
Interviews
60%
6.00
2.
Online written test on 29.09.2014 at 10.00 AM
P.P.T. & entire process will be in C-Hall on ________ at 09.00 AM
3.
Submit the details in organizational format to placement coordinators of the
branch by 24.09.2014 by 2.00 PM.
.
4.
CTC
~
Rs. 6.25 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 29.09.2014 at 09.45 AM
Mr. Ishu Singhal & Mr. Rishabh Gupta, BE-Mech. to coordinate
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 23.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ST MICROELECTRONICS INDIA
(www.st.com)
Branches of Engineering:
B.E. CS/EC/EE/EIC
MCA
ME-CS/SW/CSA/IS/VLSI/WIRELESS/
POWER/EIC/EC
Eligibility Criteria
FOR BE / MCA
10th, 10+2/Diploma
Present CGPA
70%
7.00
FOR ME/MTECH
10th, 10+2/Diploma
Present CGPA
Process of Interviews:
70%
7.50
Telephonic Interviews
3.
Submit the details in organizational format and soft copy of university bio-data to
placement coordinators of the branch by 25.09.2014.
4.
STIPEND FOR SIX MONTHS (MINIMUM) BE/MCA
Rs. 18,000/- P.M.
STIPEND FOR TEN MONTHS (MINIMUM) ME
Rs. 20,000/- P.M.
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&ECD/HE&IED/HSMCA - for kind information and request to
nominate placement council member for slots for project semester. THAPAR
UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
BLACKROCK INDIA
(www.blackrock.com)
(Profile enclosed)
Branches of Engineering:
B.E.CS/EC/EIC
MCA
Eligibility Criteria
10th, 10+2/Dip.
Present CGPA
Process of Interviews:
Online written test
Aptitude/Communication/Technical test
Interviews
60%
6.00
2.
P.P.T. will be in Auditorium in the week starting from 22.09.2014
Online test and entire process will be on 29.09.2014 at 9.00 a.m.
3.
Submit the following details to placement coordinators of the branch by
22.09.2014.
Sr.
No.
Name to
student
the Roll
No.
E-mail
Mobile
No.
%age of marks
10th
4.
Stipend during training
10+2/
Dip
Present
CGPA
Graduation
for MCA
Rs. 24,000/- p.m.
Final offer is subjected to performance in training at a CTC of Rs. 7.00 lacs
(under revision )
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HEC&ED/HSMCA – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 29.09.2014 at 8.45 AM
Mr. Jatin, ME-CS
Mr. Sudhanshu Bhatia, ME-Software
Mr. Shakti Singh, ME-CAD
Mr. Kamal Kumar Bansal, M.Tech. Thermal
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ORACLE HEALTH SCIENCES GLOBAL BUSINESS
(www.oracle.taleo.net)
Branches of Engineering:
B.E/B.Tech.-All Branches
M.E./M.Tech. All Branches
MCA
M.Sc. Mathematics
Eligibility Criteria
Present CGPA
7.00
No backlog courses at present
Process of Interviews:
Three rounds of Interviews
2.
Short listing based upon online written test already conducted by Oracle
P.P.T. & entire process will be in C-Hall on 01.10.2014 at 09.00 AM
3.
CTC
~
Rs. 7.50 Lacs p.a.
Organization is under Dream status
4.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HBT&ES/HCED/HCHED/HCSED/HE&IED/HE&CED/HMED/HLMTSOM-for kind
information and request to nominate placement council member for slots for
project semester.
Placement Coordinators on duty: Reporting time in CILP on 01.10.2014 at 8.45 AM.
Ms. Pallavi Duggal, BE-CS
Mr. Ankit Bhanot, BE-EC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SUCCESS FACTORS
(www.successfactors.com)
Branches of Engineering:
B.E. CS
MCA
M.E. CS, CSA, Software ,IS
Profile offered –Software Dev./ QA
Eligibility Criteria
Present CGPA
7.00
No backlog courses at present
Process of Interviews:
Online written test
Technical Interviews
H.R. Interviews
2.
P.P.T. & entire process will be in Auditorium on 06.10.2014 at 09.00 AM
3.
Submit the following details to placement coordinators of the branch by
24.09.2014.
Sr.
No.
Name
to
student
the
Roll
No.
E-mail
Mobile
No.
%age of marks
10th
4.
CTC
~
10+2/Dip
Present
CGPA
Graduation
for MCA/ME
Rs. 8.00 lacs p.a.
Organization is under Dream status
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC : HCSED/HSMCA – for kind information and request to nominate faculty placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 06.10.2014 at 8.45 AM.
Mr, Dhruv Srivastav, BE-EE
Mr. Vinyas Malagaudanavar, ME-EIC
Mr. Ashutosh Nayan Dey, ME-Power
Mr. Aayush Gupta, ME-Materials
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
INDUS VALLEY PARTNERS
(www.ivp.in)
Branches of Engineering:
B.E.CS/EC/EE/EIC
Eligibility Criteria
Present CGPA
Process of Interviews:
Short listing based upon details to be send
Online written test
Interviews
6.00
2.
P.P.T. & entire process will be in Auditorium on 07.10.2014 at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
25.09.2014.
Sr.
No.
Name
to
the student
Roll
No.
Email
Mobile
No.
%age of marks
10th
~
Year of
Passing
10+2/Dip
Present
CGPA
Year of
passing
4.
CTC
Rs. 6.25 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&CED/HE&IED – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 07.10.2014 at 8.45 AM.
Mr. Rajan Beri, BE-EC
Mr. Neeshu Aggarwal, ME-CSA
Mr. Pardeep Kumar ME-IS
Ms. Mehak Bali, ME-Chemical
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
EXICOM TELE SYSTEMS LTD.
(www.exicomtelesystems.in)
Branches of Engineering:
B.E. EC/CS
Eligibility Criteria
No. CGPA Criteria
Process of Interviews:
Short listing based upon details to be send
Written test
Aptitude test
Technical test
Interviews
2.
P.P.T. & entire process will be in C-Hall on 09.10.2013 at 9.00 AM
3.
Submit the details in organizational format to placement coordinators of the
branch by 26.09.2014
4.
CTC
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
~
Rs. 6,00 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HEC&ED - for kind information and request to nominate placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 09.10.2014 at 8.45 AM.
Mr. Aman Singh Chadha, MCA
Ms. Deepshikha, BE-EIC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SAMSUNG ENGINEERING INDIA PVT. LTD.
(www.samsungengineering.co.in)
Branches of Engineering:
B.E. Mech./CIVIL/EE/EIC/CHEMICAL
Eligibility Criteria
Minimum CGPA
6.50
LEET students not eligible.
Students with more then 2 years gap
between schooling and Engg. are not eligible.
Process of Interviews:
Written test
Technical test
Aptitude test
Technical interviews
H.R. Interviews
2.
P.P.T. & entire process will be in Auditorium on 09.10.2014 at 09.00 AM
3.
Submit the details in the Organizational format to placement coordinators of the
branch by 7th September, 2014.
Shortlisting will be displayed shortly.
4.
CTC
~
Rs. 4.80 lacs PA + Local transportation + Subsidized Lunch
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCED/HCHED/HE&IED/HMED – for kind information and request to nominate
faculty placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 09.10.2014 at 8.45 AM.
Mr. Pallavi Duggal BE-CS
Mr. Dhruv Srivastav BE-EE
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MAQ SOFTWARE
(www.maqsoftware.com)
Branches of Engineering:
B.E.CS
ME-CS/Soft/CSA/IS
MCA
Eligibility Criteria
10th, 10+2/Dip.
Graduation
Present CGPA
60%
60%
6.00
NO BACKLOG COURSES AT PRESENT
Process of Interviews:
2.
Written test
IQ test
Algorithm test
Interview 1st round
Programming test
Interview 2nd round
Programming test
Interview 3rd round
Communication test
Interview 4th round
P.P.T. & entire process will be in Auditorium on 09.10.2014 at 2.00 p.m.
3.
Submit the following details to placement coordinators of the branch by
.08.09.2014.
Sr. No.
Name to the Roll No.
%age of marks
Present
student
CGPA
th
10
10+2/Dip Graduation for MCA/ME
4.
CTC
~
Rs. 5.00 - 7.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HSMCA – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 09.10.2014 at 1.45 P.M.
Mr. Ankit Bhanot-BE-EC
Mr. Ashutosh Nayan Dey ME-Power
Mr. Aman Singh Chadha-MCA
Mr. Vinyas Malagaudanavar ME-EIC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
VE COMMERCIAL VEHICLES LTD.
(www.vecv.in)
Branches of Engineering:
B.E. Mechanical
Eligibility Criteria
10th, 10+2
Present CGPA
60%
6.00
No back log at present
Process of Interviews:
Online written test
Aptitude and technical test,
Reasoning, English
comprehension, Data Interpretation
Group Discussion
Interviews (Tech. + HR)
2.
P.P.T. & online test will be in C-Hall on 09.10.2014 at 2.00 P.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 26.09.2014.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
~
Rs. 5.00 lacs p.a. During training
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 09.10.2014 at 01.45 PM.
Mr. Surender Redhu, ME-EC
Ms. Divleen Kaur, ME-Wireless
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MAHINDRA COMVIVA TECHNOLOGIES LTD
(www.mahindracomviva.com)
Branches of Engineering:
B.E.- CS/ECE
Eligibility Criteria
10th, 10+2/Dip.
Present CGPA
Process of Interviews:
Online written test
Aptitude & technical test
Psychometric test
Interviews
60%
6.00
2.
P.P.T. & entire process will be in C-Hall on 13.10.2014 at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
30.09.2014.
Sr.
No.
Name to
student
the
Roll No.
E-mail
Mobile
No.
%age of marks
10th
~
Present
CGPA
10+2/Dip
4.
CTC
Rs. 5.50 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HEC&ED - for kind information and request to nominate placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 13.10.2014 at 08.45 AM.
Mr. Ishu Singhal, BE-Mech.
Mr. Prashit Aggarwal, ME-VLSI
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
LENSKART.COM
(www.lenskart.com)
Branches of Engineering:
B.E. CS/EC/EIC
M.E.CS/SW/CSA/IS/EC/Wireless/VLSI/EIC
MCA
Eligibility Criteria
No CGPA Criteria
Process of Interviews:
Short listed based upon details to be send.
Written test
Aptitude & technical Test
Interviews
2.
P.P.T. & entire process will be in Auditorium on 14.10.2014 at 2.00 PM.
3.
Placement Coordinators of the branch should submit the following details by
01.10.2014.
Sr.
No.
Name
to
student
the
Roll
No.
%age of marks
10th
~
Year of
passing
10+2/
Dip
Year of
passing
Present
CGPA
Graduation
for MCA/ME
Rs.6.00 – 8.00 lacs p.a
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I. Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HSMCA - for kind information and request to
nominate placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 14.10.2014 at 01.45 PM.
Mr. Rishabh Gupta, BE-Mech.
Mr. Piyush Kumar, ME-Str.
Mr. Viney Ghai, ME-Prod.
Mr. Amanjit Singh ME-Env.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
UTRADE SOLUTIONS
(www.utradesolutions.com)
Branches of Engineering:
B.E.CS
ME-CS/CSA/SW/IS
MCA
Eligibility Criteria
10th, 10+2/Dip.
Graduation
Present CGPA
Process of Interviews:
Online written test
Technical objective test
Programming test
Interviews
60%
60%
7.00
2.
P.P.T. & entire process will be in Auditorium on 16.10.2014 at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
02.10.2014.
Sr.
No.
Name
to
student
the
Roll
No.
E-mail
Mobile
No.
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation
for MCA/ME
Rs. 4,50 lacs – Rs. 7.00 lacs p.a..
Rs. 10,000/- p.m during semester training
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HSMCA – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 16.10.2014 at 08.45 AM.
Mr. Madhur Chhabra, BE-CS
Mr. Dharamvir Singh, MCA
Ms. Anugya Srivastava, ME-Bio-tech
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization
PAXCEL TECHNOLOGIES LTD.
(www.paxcel.net)
Opening in programming
Branches of Engineering:
B.E.- CS/EC/EIC
MCA
Eligibility Criteria
Present CGPA
Process of Interviews:
Online written test
Objective & Programming
Interviews
7.00
2.
P.P.T. & entire process will be in Auditorium on 17.10.2014 at 09.00 A.M.
3.
Placement Coordinators of the branch should submit the following details by
03.10.2014.
Sr.
No.
Name
to
student
the
Roll
No.
E-mail
Mobile
No.
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation
for MCA
4.
CTC
Rs. 3.60 to 6.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers
and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HSMCA- for kind information and request to
nominate placement council member for slots for project semester
Placement Coordinators on duty: Reporting time in CILP on 17.10.2014 at 08.45 AM.
Mr. Shakti Singh, ME-CAD
Ms. Pallavi Duggal, BE-CS
Mr. Kamal Kumar Bansal, M.Tech. Thermal
Mr. Ankit Bhanot, BE-EC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ERICSSON INDIA GLOBAL SERVICES
(www.ericsson.com)
Branches of Engineering:
B.E. CS/EC
Eligibility Criteria
10th, 10+2/Dip 60%
Present CGPA 6.00
No back log courses at present
Process of Interviews:
Online written test
Group Discussions
Interviews
2.
P.P.T. & entire process will be in C-Hall on _________ at 09.00 A.M.
3.
Submit the details in the organizational format to placement coordinators of the
branch by 25.09.2014
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
~
Rs. 3.79 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HECED - for kind information and request to nominate placement council
member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
HINDUSTAN UNILEVER LTD
(www.hul.co.in)
(Profile enclosed)
Branches of Engineering:
B.E. Mech./EE/EIC
Eligibility Criteria
10th , 10+2/Dip.
Present CGPA
Process of Interviews:
Written test
Group Discussions
Interviews
60%
6.00
2.
P.P.T. & entire process of the short listed students will be in Gurgaon on
29th/30th.September.2014/ 1st October, 2014.
3.
Submit the details in the organizational format to placement coordinators of the
branch by 19.09.2014 by 5.00 PM.
4.
CTC
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
~
Rs. 5.80 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED/HE&IED -for kind information and request to nominate placement council
member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
NESTLE INDIA
(www.nestle.in)
Branches of Engineering:
B.E. Mechanical
Eligibility Criteria
Present CGPA
Process of Interviews:
Written test
Group Discussion
Personal Interviews
6.50
2.
P.P.T. & entire process will be in C-Hall on ________ at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
24.09.2014.
Sr. No.
Name to the Roll No.
student
%age of marks
10th
~
Present
CGPA
10+2/Dip.
4.
CTC
Rs. 5.60 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate faculty placement council
member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 19.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
FREESCALE SEMICONDUCTOR INDIA
(www.freescale.com)
Branches of Engineering:
BE-CS/EC/EIC
Only for semester training
Eligibility Criteria
Process of Interviews:
2.
Sr.
No.
10th, 10+2/Dip
60%
Present CGPA
7.00
Telephonic Interviews of the shortlisted students
Submit the following details to placement coordinators of the branch by
19.09.2014 by 5.00 PM.
Name to
student
the
Roll No.
E-mail
Mobile
No.
%age of marks
10th
Present
CGPA
10+2/Dip
3.
Stipend during training
Rs 18,000/- p.m.
4.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&ECD/HE&IED - for kind information and request to nominate faculty
placement council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 08.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
HIKE LTD. (A BSB COMPNAY)
(www.hike.in/bsb.in)
Branches of Engineering:
B.E.- CS/EE/EIC/EC
MCA
M.Sc. Mathematics & Computing
M.E.-CS/SW/CSA/IS/EC/Power/EIC/Wirless/VLSI
Eligibility Criteria
No CGPA Criteria
Process of Interviews:
Short listed based upon details to be send
Written test
Aptitude & Programming Test
Three rounds of technical Interviews
2.
P.P.T. will be in Auditorium on 10.09.2014 at 03.00 P.M.
Written test will be in Auditorium on 12.09.2014 at 03.00 P.M.
Interviews will be on 13.09.2014 at 9.00 AM
3.
Placement Coordinators of the branch should submit the following details by
09.08.2014 BY 5.00 PM
Sr.
No.
Name of the student
Roll
No.
%age of marks
10th
10+2/Dip
CGPA
Graduation
for
ME/MCA/M.Sc./
M.Tech only
Organization is under dream status.
4.
CTC
~
Rs.10.50 lacs p.a
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I. Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HSMCA - for kind information and request to
nominate placement council member for slots for project semester
Placement Coordinators on duty: Reporting time in CILP on 10.09.2014 at 2.30 PM &
12.09.2014. at 02.30 PM
Mr. Rajan Beri, BE-EC
Mr. Dhruv Srivastav, BE-EE
Ms. Deepshikha, BE-EIC
Mr. Aman Singh Chadha,MCA
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 08.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
J.MITRA & CO PVT.LTD.
(www.jmitra.co.in)
Branches of Engineering:
M.Tech.-Bio.tech.
Students passed in 2014 and passing in 2015 are allowed
Eligibility Criteria
No CGPA Criteria
Job Description :
1. Continual improvement
2. Improvement project such as six sigma for Non-Compliance of procedures,
process for improving efficiency with the help of management.
3. Introducing and implementing various systems, process and standard in
regards with innovation.
4. To introduce new management systems like 5S.
5. Guiding and training personnel with regards to GMP, Quality requirements,
documenting systems and ISO 9001:2008.
6. Monitoring and assessing departments’ performance and work towards the
goals assigned.
7 Introduce various innovating techniques
Process of Interviews:
Written test
Interviews
2.
P.P.T. & entire process will be in C-Hall on .________ .
3.
Placement Coordinators of the branch should submit the following details by
11.09.2014 BY 5.00 PM
Sr.
No.
Name of the student
Roll
No.
%age of marks
10th
~
10+2/Dip
Graduation
M.Tech only
CGPA
for
4.
CTC
Rs.3.50 lacs p.a
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I. Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HBTD - for kind information and request to nominate placement council member
for slots for project semester
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 08.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
LARSEN & TOUBRO CONSTRUCTION ECC
DIVISION
(www.lntecc.com, www.larsentoubro.com)
Branches of Engineering:
B.E. CIVIL/MECH/EE/EIC
M.E. Stru/CAD/Thermal/Power/ EIC/Env
Eligibility Criteria
10th , 10+2
60%
Graduation
60%
Present CGPA
6.00
( No backlog courses)
Details enclosed
Process of Interviews: for BE
Written test
Aptitude test, Technical test,
Interviews
Process of Interviews: for ME
Subject test
Interviews
Calculators are allowed in BE/ME Written test
2.
Online test on 18.09.2014 at 9.00 AM
P.P.T. & entire process will be in Auditorium on 19.09.2014 at 09.00 AM
3.
Submit the following details to placement coordinators of the branch by
09.08.2014 by 5.00 PM
Sr.No.
Name
Roll
No.
DOB
Gender
%age of mark
10th
10+2/Dip
Email
Present
CGPA
Graduation
for ME only
with branch
After sending the above data to the organization, a link will be send to the short
listed students for online employment application form.
4.
CTC
~
For BE
For ME
-
Rs. 5.00 lacs P.A.
Rs. 5.13 lacs P.A.
5.
Students should bring Hard Board, along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCED/HE&IED/HMED/HEnv.Sc. – for kind information and request to nominate
faculty placement council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 03.09.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SAMSUNG ENGINEERING INDIA PVT. LTD.
(www.samsungengineering.co.in)
Branches of Engineering:
B.E. Mech./CIVIL/EE/EIC/CHEMICAL
Eligibility Criteria
Minimum CGPA
6.50
LEET students not eligible.
Students with more then 2 years gap
between schooling and Engg. are not eligible.
Process of Interviews:
Written test
Technical test
Aptitude test
Technical interviews
H.R. Interviews
2.
P.P.T. & entire process will be in Auditorium on ________ at 09.00 AM
3.
Submit the details in the Organizational format to placement coordinators of the
branch by 7th September, 2014.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
~
Rs. 4.80 lacs PA + Local transportation + Subsidized Lunch
( H.S. Bawa )
Industrial Coordinator
CC:
HCED/HCHED/HE&IED/HMED – for kind information and request to nominate
faculty placement council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
BELZABAR SOFTWARE DESIGN INDIA
(www.belzabar.com)
Branches of Engineering:
B.E. CS
Eligibility Criteria
10th , 10+2/Dip.
Present CGPA
Process of Interviews:
Short listing based upon your details.
First round of Online Quiz
Second Coding round for short listed students
Third round technical interviews
Final interviews
60%
6.00
2.
P.P.T. & entire process will be in Auditorium on 11.09.2014 at 09.00 AM
3.
Submit the following details to placement coordinators of the branch by
01.09.2014 by 5.00 PM.
S.No.
4.
Name of Roll % age of marks
the student No.
10th
10+2/Dip.
CTC
~
Present
CGPA
Mobile
no.
E-mail
Rs. 8.64 Lacs p.a. for software development
The organization is under dream status
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
In-charge Placement
CC:
HCSED- for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 11.09.2014 & 12.09.2014.
at 08.45 AM
Mr. Jatin ME-CS
Mr. Viney Ghai ME-Prod.
Mr. Sudhanshu Bhatia ME-Soft.
Ms. Gurjeet M.Sc. –Bio-tech
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SAB MILLER INDIA LTD
(www.sabmiller.com)
Branches of Engineering:
B.E. Mechanical
Eligibility Criteria
10th, 10+2/Diploma
Present CGPA
Process of Interviews:
Written test
Group Discussions
Two rounds of Interviews
60%
7.00
2.
P.P.T. & entire process will be in C-Hall on 12.09.2014 at 9.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
04.09.2014.
Sr. No.
Name to the student
~
Roll No.
%age of marks
10th
10+2/Dip.
Present CGPA
4.
CTC
Rs. 4.40 lacs p.a.
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate placement council member
for slots for Project semester
Placement Coordinators on duty: Reporting time in CILP on 12.09.2014. at 08.45 AM
Mr. Shakti Singh ME-CAD/CAM
Mr. Aayush Gupta ME-Materials
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 25.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MAKE MY TRIP
(www.makemytrip.com)
Branches of Engineering:
B.E. CS
MCA
Profiles will be software development/QA
Eligibility Criteria
Present CGPA
6.00
No backlog courses at present
Process of Interviews:
Short listing based upon your details.
Online written test
Technical test – Java/.Net/QA,
Aptitude test
Three rounds of Interviews
2.
Online test will be on 2nd September, 2014 at 9.00 A.M.
P.P.T. & entire process will be in Auditorium on 15th September, 2014 at
09.00 AM
3.
Submit the details in the Organizational format to placement coordinators of the
branch by 27.08.2014 by 5.00 PM.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
~
Rs. 6.00 Lacs p.a. for software development
Rs. 5.00 Lacs p.a. for QA
( H.S. Bawa )
In-charge Placement
CC:
HCSED/HSMCA - for kind information and request to nominate faculty placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 02.09.2014. at 08.45 AM
Mr. Aman Singh Chadha & Mr. Dharamvir Singh –MCA to coordinate online test only.
Placement Coordinators on duty: Reporting time in CILP on 15.09.2014. at 08.45 AM
Mr. Pardeep Kumar ME-IS
Mr. Neeshu Aggarwal ME-CSA
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
NAUKRI.COM
(www.naukri.com)
Branches of Engineering:
B.E.CS
M.E.-CS/SW
Eligibility Criteria
10th , 10+2
Graduation
Present CGPA
Process of Interviews:
Online test
Code cracking session
Three rounds of Interviews
60%
60%
6.00
2.
P.P.T. & entire process will be in Auditorium on 16.09.2014 at 2.00 P.M. .
3.
Submit the following details to placement coordinators of the branch by
05.09.2013 by 5.00 PM
Sr.
No.
Name to the Roll No.
student
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation
for ME
4.
CTC
Rs. 6.77 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED– for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 16.09.2014 at 2.00 P.M.
Mr. Piyush Kumar ME-Structures
Mr. Ankit Bhanot BE-EC
Ms. Nishi Arora M.Sc. –Chemistry
Mr.Vinyas ME-EIC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
HONDA CARS INDIA LTD
(www.hondacarindia.com)
Branches of Engineering:
B.E. Mechanical Opening in Honda R&D
Industrial MBA- Marketing only.
(BE degree is mandatory)
Eligibility Criteria
10th, 10+2/Diploma
Present CGPA
60%
6.00
NO GAP YEAR
NO BACKLOG COURSES AT PRESENT
AGE NOT MORE THAN 24 YEARS.
Process of Interviews:
Written test
Aptitude test
Technical test
Group Discussions
Two rounds of Interviews
2.
P.P.T. & entire process will be in C-Hall on 17.09.2014 at 9.00 A.M.
3.
Submit the details in the organizational format to placement coordinators of the
branch by 28.08.2014 by 2.00 p.m.
4.
CTC
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
~
Rs. 37.500/- p.m. during training
Rs. 4.50 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate placement council member
for slots for Project semester
Placement Coordinators on duty: Reporting time in CILP on 17.09.2014 at 8.45 A.M.
Mr. Ishu Singhal
BE-Mech.
Mr. Rishabh Gupta BE-Mech.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ANAND GROUP
(www.anandgroupindia.com)
Branches of Engineering:
B.E.- Mech/Indl.
B.E- Mech./Indl./Mtrx
Eligibility Criteria
10th, 10+2
Minimum CGPA
Final year
Pre-final year
60%
6.00
No backlog courses at present
Process of Interviews:
Online written Test
Technical test
Aptitude test
Group Discussions
Interviews
2.
Online test on 09.09.2014 at 9.00 A.M.
PPT & entire process will be in C-Hall on 18.09.2014 at 9.00 A.M..
3.
Submit the details in the organizational format to placement coordinators of the
branch by 02.09.2014.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
~
Rs. 4.00 lacs PA during training Rs. 5,000/- P.M. -
Final year
Pre-Final year
( H.S. Bawa )
Industrial Coordinator
CC:
HMED/HLMTSOM – for kind information and request to nominate placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 09.09.2014. at 08.45 AM
Mr. Ishu Singhal & Mr. Rishabh Gupta BE-Mech. – to coordinate online test only.
Placement Coordinators on duty: Reporting time in CILP on 18.09.2014. at 08.45 AM
Mr. Kamal Kr. Bansal ME-Thermal
Ms. Shilakha Dawar M.Sc.-Physics
Mr. Dhruv Srivastav BE-EE
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MAQ SOFTWARE
(www.maqsoftware.com)
Profile enclosed.
Branches of Engineering:
B.E.CS
ME-CS/Soft/CSA/IS
MCA
Eligibility Criteria
10th, 10+2/Dip.
Graduation
Present CGPA
60%
60%
6.00
NO BACKLOG COURSES AT PRESENT
Process of Interviews:
2.
Written test
IQ test
Algorithm test
Interview 1st round
Programming test
Interview 2nd round
Programming test
Interview 3rd round
Communication test
Interview 4th round
P.P.T. & entire process will be in Auditorium on 18.09.2014 at 2.00 p.m.
3.
Submit the following details to placement coordinators of the branch by
.08.09.2014.
Sr. No.
Name to the Roll No.
%age of marks
Present
student
CGPA
th
10
10+2/Dip Graduation for MCA/ME
4.
CTC
~
Rs. 5.00 - 7.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HSMCA – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 18.09.2014 at 1.45 P.M.
Mr.Ashutosh Nayan Dey ME-Power
Ms. Divleen Kaur M.Tech.-Wireless
Ms. Mehak Bali M.Tech.-Chemical
Mr. Rajan Beri BE-EC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
RAMBOLL INDIA
(www.ramboll.com)
Branches of Engineering:
B.E.Civil/EE/Mech.
ME-Structures
Eligibility Criteria
Present CGPA
Process of Interviews:
Written test
Group Discussions
Interviews
7.00
2.
P.P.T. & entire process will be in Auditorium on ________ at _______.
3.
Submit the following details & soft copy of university bio-data to placement
coordinators of the branch by 02.09.2014.
Sr. No.
Name to the Roll No.
student
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation for ME
4.
CTC
Rs. 4.20 to 5.50 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCED/HMED/HEIED – for kind information and request to nominate faculty
placement council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2010
CAMPUS INTERVIEWS
1.
Name of the Organisation:
GS ENGG. & CONSTRUCTION INDIA
(www.gsconst.co.in)
Details enclosed.
Branches of Engineering:
B.E. – Chem/EIC/Mech.
Eligibility Criteria
Minimum CGPA
Process of Interviews:
Written Test
Group Discussions
Interviews
6.00
2.
Entire process will be on 13.09.2014 in Gurgon
3.
Submit the following details & soft copy of bio-data to placement coordinator of
the branch by 02.09.2014.
Only the following number of top students CGPA wise should submit their details
& bio-data’s.
BE-Chemical – 05, BE-Mech. -10, EIC- 05
Sr. No.
Name to the students
~
Roll No.
%age of marks
10th 10+2/Dip.
Present CGPA
4.
CTC
Rs. 4.80 lacs pa.
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCHED/HEIED/HMED/for kind information and request to nominate placement
council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ISGEC YAMUNA NAGAR.
(www.isgec.com)
Branches of Engineering:
B.E. Mech / EE.
Eligibility Criteria
10th , 10+2/Dip.
Present CGPA
Process of Interviews:
Written test
Group Discussions
Interviews
60%
6.00
2.
P.P.T. & entire process will be in C-Hall on ______ at ____.
3.
Submit the following details to placement coordinators of the branch by
02.09.2014.
Sr.
No.
Name to
students
the Father’s Name
%age of marks
10th
4.
CTC
~
Present CGPA
10+2/Dip.
Rs. 4.03 lacs p.a. during training
Rs. 4.25 lacs p.a. after training
Bond Rs. 1.00 lacs for three years
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED/HEIED – for kind information and request to nominate placement council
member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 27.08.2014
REVISED
CAMPUS INTERVIEWS
1.
Name of the Organization:
CROMPTON GREAVES LTD
(www.cgglobal.com)
Branches of Engineering:
B.E.- EC/EIC/CS
M.E.- CAD/Prod./Power/Thermal/EIC/EC/
VLSI/Wireless
Eligibility Criteria
10th, 10+2
Graduation
Minimum CGPA
Process of Interviews:
Written Test
Technical test
Aptitude test
Group Discussions
Interviews
60%
60%
6.00
2.
P.P.T. & entire process will be in Auditorium on 03.09.2014 at 9.00 A.M.
3.
Submit again the following details and soft copy of university bio-data’s to
placement coordinators of the branch by 28.08.2014.
Sr.
No.
Name of the student
Roll
No.
%age of marks
10th
~
BE ME -
10+2/Dip
CGPA
Graduation for ME
only
4.
CTC
Rs. 4.50 lacs p.a.
Rs 5.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HEIED/HMED/HECED/HCSED – for kind information and request to nominate
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 03.09.2014 at 8.45 A.M.
Ms. Pallavi Duggar, BE-CS
Ms. Divleen Kaur, ME-Wireless
Mr. Surender Redhu, ME-EC
Mr. Prashit Aggarwal, ME-VLSI
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 25.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
HONDA CARS INDIA LTD
(www.hondacarindia.com)
Branches of Engineering:
B.E. Mechanical
Eligibility Criteria
10th, 10+2/Diploma
Present CGPA
60%
6.00
NO GAP YEAR
NO BACKLOG COURSES AT PRESENT
AGE NOT MORE THAN 24 YEARS.
Process of Interviews:
Written test
Aptitude test
Technical test
Group Discussions
Two rounds of Interviews
2.
P.P.T. & entire process will be in Auditorium on 17.09.2014 at 9.00 A.M.
3.
Submit the details in the organizational format to placement coordinators of the
branch by 27.08.2014 by 1.00 p.m.
4.
CTC
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
~
Rs. 37.500/- p.m. during training
Rs. 4.50 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HMED – for kind information and request to nominate placement council member
for slots for Project semester
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 25.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MAKE MY TRIP
(www.makemytrip.com)
Branches of Engineering:
B.E. CS
MCA
Profiles will be software development/QA
Eligibility Criteria
Present CGPA
6.00
No backlog courses at present
Process of Interviews:
Short listing based upon your details.
Online written test
Technical test – Java/.Net/QA,
Aptitude test
Three rounds of Interviews
2.
Online test will be on 2nd September, 2014 at 9.00 A.M.
P.P.T. & entire process will be in Auditorium on 15th September, 2014 at
09.00 AM
3.
Submit the details in the Organizational format to placement coordinators of the
branch by 27.08.2014 by 5.00 PM.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
~
Rs. 6.00 Lacs p.a. for software development
Rs. 5.00 Lacs p.a. for QA
( H.S. Bawa )
In-charge Placement
CC:
HCSED/HSMCA - for kind information and request to nominate faculty placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 02.09.2014. at 08.45 AM
Mr. Aman Singh Chadha & Mr. Dharamvir Singh –MCA to coordinate
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 25.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization
ZOMATA
(www.zomata.com)
Branches of Engineering
B.E. CS
Eligibility Criteria
No CGPA criteria
Process of Interviews
Short listing based upon bio-data.
Bio-data must contain projects, applications,
website created.
Two rounds of Interviews on skype
2.
Skype of the shortlisted students will be in CILP on 29-30th August, 2014
at 09.00 A.M.
3.
Submit the following details and soft copy of university bio-data’s to placement
coordinators of the branch by 26.08.2014.by 9.00 A.M.
S.NO.
Name
Roll
No.
% age of marks
10th
4.
CTC
~
Present E-mail
CGPA
Mobile No.
10+2/Dip.
Rs. 12.00 lacs P.A.
Organization is under Dream status
5.
Students should bring Hard Board, along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED – for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 29.08.2014 at 8.45A.M M.
Ms. Pallavi Duggal & Mr. Madhur Chhabra BE-CS to coordinate.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 12.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ALSTOM INDIA LTD.
(www.alstom.com)
Branches of Engineering:
B.E. Mechanical/Electrical/EIC/EC/Civil
Eligibility Criteria
10th , 10+2
Present CGPA
60%
6.00
All subjects should be cleared in first attempt
Process of Interviews:
Online test
Group Discussions
Interviews
2.
Online written test on 19.08.2014 at 01.00 PM
P.P.T. & entire process will be in Auditorium on 30.08.2014 at 09.00 AM
3.
Submit the details in organizational format to placement coordinators of the
branch by 14.08.2014 by 5.00 PM.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
~
Rs 5.00 lacs p.a.
( H.S. Bawa )
Industrial Coordinator
CC:
HEIED/HMED/HCED/HECED - for kind information and request to nominate
placement council member for slots for project semester
Placement Coordinators on duty : Reporting time in CILP on 19.08.2014 at 12.30
P.M & 30.08.2014 at 8.45 A.M.
Mr. Ashutosh Nayan Day –ME-Power
Mr. Vinyas Malagaudanavar - ME-EIC
Ms. Diksha Chawla. , M.Sc.-Maths.
Mr. Piyush Kumar, ME-Structures
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 12.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
TAXAS INSTRUMENTS
(www.ti.com)
(only for internship)
Branches of Engineering:
B.E. EE/EC/EIC
Eligibility Criteria
Present CGPA
Process of Interviews:
Online written Test
Aptitude test
Technical test
Interviews
7.00
2.
Online written test on _____________ at 09.00 AM
P.P.T. & entire process will be in TU, Patiala/Delhi on ____________.
3.
Submit the details in organizational format to placement coordinators of the
branch by 14.08.2014 by 5.00 PM.
4.
Stipend
~
Rs. 25000/- p.m.
PPO may be offered after training, Rs. 10.50 lacs.p.a.
Profile offered
Analog design, opening in Bangalore
Analog Applications, opening in Sales offices of TI
Technical Sales, opening in Sales offices of TI
(Details enclosed)
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HE&IED/HE&CED - for kind information and request to nominate placement
council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 07.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
CROMPTON GREAVES LTD
(www.cgglobal.com)
Branches of Engineering:
B.E.- MECH/EE/EIC
M.E.- CAD/Prod./Power/EIC
Industrial-MBA
MBA- Operations/Marketing/HR
Eligibility Criteria
10th, 10+2
Graduation
Minimum CGPA
Process of Interviews:
Written Test
Technical test
Aptitude test
Group Discussions
Interviews
60%
60%
6.00
2.
P.P.T. & entire process will be in Auditorium on 03.09.2014 at 9.00 A.M.
3.
Submit the following details and soft copy of university bio-data’s to placement
coordinators of the branch by 20.08.2014.
Sr.
No.
Name of the student
Roll
No.
%age of marks
10th
~
10+2/Dip
CGPA
Graduation
for
ME/M.Tech only
4.
CTC
BE - Rs. 4.50 lacs p.a.
ME - Rs 5.00 lacs p.a.
MBA - Rs..6.50 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HE&IED/HMED/HLMTSOM – for kind information and request to nominate
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 03.09.2014 at 8.45 A.M.
Ms. Pallavi Duggar, BE-CS
Mr. Surender Redhu, ME-EC
Ms. Divleen Kaur, ME-Wireless
Mr. Prashit Aggarwal, ME-VLSI
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 07.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
DELOITTE CONSULTING INDIA PVT. LTD.
(www.deloitte.com)
Branches of Engineering:
B.E. CS/EE/EC/EIC not confirmed yet.
MCA
M.E. Soft./CS/CSA/IS
Eligibility Criteria
10th, 10+2/Dip.
60%
Graduation
60%
Present CGPA
6.50
No backlog courses at present
Process of Interviews:
Online written test
Aptitude test
Analytical, Problem solving Test
Case study discussion
Case study presentation and Interviews
2.
Online written test on 14.08.2014 at 9.00 A.M.
P.P.T. will be in Auditorium on 03.09.2014 at 04.00 P.M.
Entire process will be in Auditorium on 04.09.2014 at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by 10.08.2014 by
5.00 PM.
Sr. No.
Name of the students
Roll No.
%age of marks
10th
10+2/Dip
CGPA
Graduation for ME/
MCA
AND
Students should register online by 10.08.2014 by 2.00 PM. After this the link would be
deactivated
Link: https://dtt.taleo.net/careersection/11900/jobdetail.ftl?lang=en&job=S15HCANARK-Thapar
4.
CTC
~
Rs. 6.18 lacs P.A.
Organization is under Dream status
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HSMCA-for kind information and request to nominate
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 14.08.2014 at 8.45 AM
03.09.2014 at 3.45 PM and 04.09.2014 at 8.45 AM
Mr. Rishabh Gupta, BE-Mech.
Mr. Viney Ghai, ME-Prod.
Ms. Shilakha Dawar, M.Sc. Physics.
Mr. Kamal Kumar Bansal, ME-Thermal
Mr. Ankit Bhanot, BE-EC
Mr. Aman Singh Chadha, MCA
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 07.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
AMADEUS SOFTWARE LABS INDIA LTD
(www.amadeus.com)
(Profile offered - Development/QA/BA)
Branches of Engineering:
B.E.- CS/EC
MCA only for internship
Eligibility Criteria
Present CGPA
Process of Interviews:
Online test,
Aptitude
Verbal and Numerical
Three rounds of technical Interviews
7.00
2.
P.P.T. & entire process will be in Auditorium on 05.09.2014 at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by
20.08.2014.
Sr. No.
Name
of Roll No.
the student
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation for MCA
4.
CTC
Rs. 7.69 lacs pa
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&CED/HSMCA - for kind information and request to nominate
placement council member for slots for project semester
Placement Coordinators on duty: Reporting time in CILP on 05.09.2014 at 8.45 AM.
Mr. Jatin, ME-CS
Ms. Gurjeet , M.Sc. Bio-tech.
Mr. Sudhanshu Bhatia, ME-Soft
Ms. Anugya Srivastava, M.Tech. Bio.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 07.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
ORACLE FINANCIAL SERVICES
(www.oracle.com/financialservices)
( Profile & details enclosed )
Branches of Engineering:
B.E/B.Tech.-All Branches
M.E./M.Tech. All Branches
MCA
M.Sc. Mathematics
Eligibility Criteria
10th, 10+2/Dip.
Graduation
Present CGPA
60%
55%
6.00
No backlog courses at present
Process of Interviews:
Online written test
Aptitude test
Technical Interviews
Three rounds of Interviews
2.
Online written test on 26.08.2014 at 09.00 AM
P.P.T. & entire process will be in Auditorium on 10.09.2013 at 09.00 AM
3.
Submit the following details to placement coordinators of the branch by
14.08.2014 by 5.00 PM.
Sr. No.
Name
of Roll No.
the student
%age of marks
10th
~
10+2/Dip
Present
CGPA
Graduation for
ME/M.Sc/MCA
4.
CTC
Rs. 5.56 Lacs p.a.
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HBT&ES/HCED/HCHED/HCSED/HE&IED/HE&CED/HMED/HLMTSOM-for kind
information and request to nominate placement council member for slots for
project semester.
Placement Coordinators on duty: Reporting time in CILP on 26.08.2014 at 8.45 A.M. and
10.09.2014 at 8.45 AM.
Mr. Madhur Chhabra BE-CS
Mr. Dhruv Srivastav, BE-EE
Ms. Pallavi Duggar, BE-CS
Ms. Nishi Arora, M.Sc. Chem.
Mr. Shakti Singh, ME-CAD
Mr. Aayush Gupta, M.Tech-Materials
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 07.08.2014
CAMPUS INTERVIEWS
1.
Name of the Organization
EXPEDIA INDIA
(www.expediainc.com)
Branches of Engineering
B.E. CS
Eligibility Criteria
10th , 10+2
Graduation
Present CGPA
60%
60%
6.00
No Backlog courses
Process of Interviews
Online written test
Three rounds of Interviews
2.
Online written test on 27.08.2014 at 09.00 AM
P.P.T. & entire process will be in Auditorium on 08.09.2014 at 09.00 A.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 14.08.2014 by 5.00 PM.
4.
CTC
~
Rs. 10.00 lacs P.A.
Organization is under Dream status
5.
Students should bring Hard Board, along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED – for kind information and request to nominate faculty placement council
member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 27.08.2014 at 8.45A.M and
08.09.2014 at 8.45A.M.
Mr.Dharamvir Singh, MCA
Ms. Mehak Bali, M.Tech.-Chem.
Mr. Rajan Beri, BE-EC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 28.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MARUTI SUZUKI INDIA LTD
(www.marutisuzuki.com)
Branches of Engineering:
B.E.- Mechanical/EE/Civil/CS
Eligibility Criteria
10th, 10+2
Present CGPA
65%
6.50
No Backlog courses at present
Color-blindness students are not eligible
Process of Interviews:
Online written test
Technical Aptitude tests
Psychometric test
Interviews
2.
Online written test on 09.08.2014 at 9.00 AM
P.P.T. & entire process will be in Auditorium on 27.08.2014 at 09.00 A.M.
3.
Placement Coordinators of the branch should submit the following details by
01.08.2014 by 5.00 PM.
Sr. No.
Name to the Roll No.
student
%age of marks
10th
Present
CGPA
10+2/Dip.
And
Students should register online by 31st July, 2014 by 11.59 PM. After this
the link would be deactivated Link : http://goo.gl/ZrbtWf
Students to carry original photo id proof ( Voter ID, Passport, Rashan Card,
Aadhaar Card only) along with the admit card to appear in the online test.
4.
ATR
~
Rs. 5.40 lacs during training of one year.(Under revision)
Rs. 6.35 lacs – after training (Under revision)
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HMED/HCED/HEIED - for kind information and request to nominate
placement council member for slots for project semester.
Placement Coordinators on duty : Reporting time in CILP on 09.08.2014 &
27.08.2014 at 8.45 A.M.
Mr. Jatin, ME-CS
Ms. Gurjeet, M.Sc. Bio-tech
Mr. Surender Radhu, ME-EC
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
MICROSOFT INDIA
(www.microsoft.com)
Branches of Engineering:
B.E. CS
Final year for placement and pre-final year students for two months trg.
M.E. CS/Software/CSA
Eligibility Criteria
Present CGPA
7.00
Process of Interviews:
Online written Technical Test
Three rounds of interviews
2.
Online written test on 12.08.2014 at 9.00 AM
P.P.T. & entire process will be in Auditorium on 18.08.2014 at 09.00 A.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 04.08.2014.
4.
CTC
~
For training – pre final year
MSIT Rs. 10.36 lacs p.a.
MSIT Rs. 25.000/- p.m.
IDC Rs.35000/- p.m.
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HSMCA - for kind information and request to nominate placement
council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 12.08.2014, 18.08.2014 &
19.08.2014 at 8.45 A.M..
Mr. Ashutosh Nayan Dev, ME-Power
Mr. Ishu Singhal, BE-Mech.
Mr. Mr. Vinyas, ME-EIC
Ms. Nishi Arora, M.Sc. Chemistry
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization
ZS ASSOCIATES INDIA PVT LTD.
(www.zsassociates.com)
Opening in following fields
Business Analytics Associate (BAA)
Business Operation Associate (BOA)
Business Technology Associate (BTA)
(Profile enclosed)
Branches of Engineering:
BE. All Branches
BE- Industrial - MBA not allowed.
Eligibility Criteria
Present CGPA
Process of Interviews:
Short listing based upon your details.
Online written test
Aptitude, Behavioural, Technical test
Group Discussions, Case Study
Interview three rounds
6.00
2.
P.P.T. in Auditorium on 12.08.2014 at 3.00 PM.
Online written test on 13.08.2014 at 09.00 AM.
Interviews of the short listed students will be on 22.08.2014.
3.
Submit the details in the Organizational format to placement coordinators of the
branch by 06.08.2014 by 5.00 PM. Students have to choose one profile BAA or BOA
or BTA. Hence coordinators should send three separate list for each branch profile
wise.
4.
CTC
5.
Students should bring Hard Board, along with few A-4 size blank papers and Institute
Identity Card at the time of written test.
~
Rs. 6.68 lacs P.A. + ELRP Benefits (Long term contribution)
( H.S. Bawa )
Industrial Coordinator
CC:
HBT&ES/HCED/HCHED/HCSED/HEIED/HECED/HMED - for kind information and
request to nominate placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 12.08.2014 at 2.45 PM,
13.08.2014 at 8.45 A.M. and 22.08.2014 at 9.00 A.M.
Mr. Sudhanshu Bhatia, ME-SW
Mr. Aman Singh Chadha, MCA
Ms. Divleen Kaur, ME-Wireless
Mr. Shaki Singh, ME-CAD
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
DE SHAW INDIA SOFTWARE LTD
(www.deshawindia.com)
Branches of Engineering:
B.E.- All Branches.
M.E./ M.Tech. - All Branches
MCA
Eligibility Criteria
Present CGPA
7.50 for CS branches
8.00 for Non CS branches
Students should know the following
1.
2.
Course work in C/C++ Java and data structures
Knowledge of object oriented programming, databases, operating
systems & Computer Organization. Strong communication skills
Process of Interviews:
Written test
Aptitude test, Technical test
Four rounds of Interviews
2.
P.P.T. & entire process will be in Auditorium on 20.08.2014 at 09.00 A.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 08.08.2014.
4.
CTC
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
~
Rs.17.10
- 18.60 lacs pa.
( H.S. Bawa )
Industrial Coordinator
CC:
HBT&ES/HCED/HCHED/HCSED/HE&IED/HE&CED/HMED/HLMTSOM-for kind
information and request to nominate placement council member for slots for
project semester.
Placement Coordinators on duty: Reporting time in CILP on 20.08.2014 & 21.08.2014
at 8.45 A.M.
Mr. Ankit Bhanot, BE-EC
Mr. Kamal Kumar Bansal, ME-Thermal
Ms. Diksha Chawla, M.Sc. Maths
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
EXL SERVICE (INDUCTIS INDIA LTD.)
(www.exlservice.com)
Branches of Engineering:
B.E. - All branches
BE- Industrial is allowed
MCA
Eligibility Criteria
Present CGPA
6.00
( NO BACKLOG COURSES AT PRESENT)
Process of Interviews:
Short listing based upon your details.
Two online written Tests
Extempore
Interviews - Three rounds
2.
P.P.T. & entire process will be in Auditorium on 25.08.2014 at 09.00 A.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 12.08.2014.
4.
CTC
~
For BE
Rs. 5.25 lacs p.a.
For MCA
Rs. 10000/- p.m. during six months training
Rs. 4.50 lacs p.a for 1st year
Rs. 5.25 lacs p.a. after 2nd year
5.
Students should bring Hard Board, Two photographs along with few A-4 size
blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HBT&ES/HCED/HCHED/HCSED/HE&IED/HE&CED/HMED/HLMTSOM - for
kind information and request to nominate placement council member for slots for
project semester.
Placement Coordinators on duty: Reporting time in CILP on 25.08.2014 & 26.08.2014
at 8.45 A.M.
Mr. Pardeep Kumar, ME-IS
Mr. Piyush Kumar, ME-Str.
Mr. Prashit Aggarwal, ME-VLSI
Mr. Amanjit Singh ME-Env.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SANDISK CORPORATION
(www.sandisk.com)
Branches of Engineering:
B.E.- CS/EE/EIC/EC
M.E.-CS/SW/CSA/IS/EIC/POWER/EC/WIRE/VLIS
Eligibility Criteria
Present CGPA
Process of Interviews:
Written test
Aptitude & technical Test
Five rounds of Interviews
7.00
2.
P.P.T. & entire process will be in Auditorium on 28.08.2014 at 09.00 A.M.
3.
Placement Coordinators of the branch should submit the following details by
14.08.2014.
Sr.
No.
Name of the student
Roll
No.
%age of marks
10th
4.
5.
CTC
~
10+2/Dip
CGPA
Graduation
for
ME/M.Tech only
UG
Rs.11.39 lacs p.a + RSU’s
PG
Rs.12.74 lacs p.a + RSU’s
Students should bring Hard Board along with few A-4 size blank papers and
Institute I. Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HSMCA - for kind information and request to
nominate placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 28-08-2014 & 29.08.2014 at
8.45 A.M.
Mr. Rishabh Gupta, BE-Mech.
Mr. Viney Ghai, ME-Prod.
Ms. Shilakha Dawar, M.Sc. Physics.
Mr. Aayush Gupta, ME-Material Sc.
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization:
SCHNEIDER ELECTRIC LTD
(www.schneider-electric.com)
Branches of Engineering:
B.E.- CS/EE/EIC/EC/MECH.
Eligibility Criteria
Present CGPA
Process of Interviews:
Online Aptitude test
Group Discussions
Interviews
7.00
2.
Online written test on 19.08.2014 at 9.00 A.M.
P.P.T. & entire process will be in Auditorium on 29.08.2014 at 09.00 A.M.
3.
Placement Coordinators of the branch should submit the following details by
07.08.2014 by 5.00 PM.
Sr. No.
Name to the Roll No.
student
%age of marks
10th
~
Present
CGPA
10+2/Dip.
4.
CTC
Rs.4.75 lacs p.a. (Under revision )
5.
Students should bring Hard Board along with few A-4 size blank papers and
Institute I.Card at the time of written test.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HE&IED/HE&CED/HMIED - for kind information and request to nominate
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 19.08.2014 & 29.08.2014 at
8.45 A.M.
Mr. Madhur Chhabra, BE-CS
Mr. Dinesh Jain, MCA
Ms. Neeshu Aggarwal, ME-CSA
Ms. Anugya Srivastva, M.Tech.Bio
THAPAR UNIVERSITY, PATIALA
CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 31.07.2014
CAMPUS INTERVIEWS
1.
Name of the Organization
INFORMATICA CORPORTION
(www.informatica.com)
Branches of Engineering
B.E. CS
MCA
ME-CS/Soft/CSA
Top 10 students from each of these 4 post
graduation courses.
Eligibility Criteria
10th , 10+2
Graduation
Present CGPA
60%
60%
7.50
No Backlog courses at present
Process of Interviews
Written test
Objective- Online
Technical subjective tests Online
Data Structures/Operating Systems etc.
Three rounds of Interviews
2.
P.P.T. & entire process will be in Auditorium on 01.09.2014 at 09.00 A.M.
3.
Submit the details in organizational format to placement coordinators of the
branch by 20.08.2014 by 5.00 PM.
4.
CTC
5.
Students should bring Hard Board, along with few A-4 size blank papers and
Institute Identity Card at the time of written test.
~
Rs. 9.00 lacs P.A.
( H.S. Bawa )
Industrial Coordinator
CC:
HCSED/HSMCA – for kind information and request to nominate faculty
placement council member for slots for project semester.
Placement Coordinators on duty: Reporting time in CILP on 01-09-2014 & 02.09.2014 at
8.45 A.M.
Mr. Dhruv Srivastav, BE-EE
Mr. Rajan Beri, BE-EC
Ms. Mehak Bali, ME-Chem.
Ms. Deepshikha, BE-EIC