D-1
For AICTE Diploma Courses
With Effect From 2013-14
Maharashtra State Board of Technical Education
Teaching Plan (TP)
Institute Code No.: 0041
Course and Code: Mechanical Engineering (ME)
Semester: 5
Chapter Topic / Details
No.
(Total
Hrs.)
1.1 Significance of measurement, types of
1
measurement,
1.2 classification of instruments
1.3 Static terms and characteristics- Range
and Span, Accuracy and Precision,
Reliability, Calibration, Hysteresis and
Dead zone, Drift, Sensitivity, Threshold
And Resolution, Repeatability and
Reproducibility, Linearity.
1.4 Dynamic characteristics- Speed of
response, Fidelity and Dynamic errors,
Overshoot.
1.5 Measurement of error- Classification of
errors, environmental errors, signal
transmission errors, observation errors,
operational errors.
1.6 Transducers : Classification of
transducers, active and passive, resistive,
inductive, capacitive, piezo-resistive,
Subject Code: 12156
Name of Faculty: Miss. Raut T.G.
Allocated Date of
Hrs. in
Commencing
Curriculum Topic
10
26/06/2013
Date of
Completion
of Topic
Teaching
Method/
Media
25/07/2013
Black
Board,
Slideshow
presentati
on
Remarks
1
Chapter Topic / Details
No.
(Total
Hrs.)
thermo resistive
Note: Simple numericals on above topics
Control systems:
2
3
1.1 Block diagram of automatic control
system, closed loop system, open loop
system, feedback control system, feed
forward control system, servomotor
mechanism,
1.2 Comparison of hydraulic, pneumatic,
electronic control systems,
1.3 Proportional control actions, integral
control action, derivative control action,
PID control action.
1.4 Applications of measurements and control
for setup for boilers, air conditioners, motor
speed control
Note: No numerical on above topics.
Displacement measurement:
1.1 Capacitive transducer,
1.2 Potentiometer,
1.3 LVDT, RVDT,
1.4 Specification, selection & application of
displacement transducer.
Note: No numerical on above topics.
Allocated Date of
Hrs. in
Commencing
Curriculum Topic
08
04
31/07/2013
04/09/2013
Date of
Completion
of Topic
Teaching
Method/
Media
29/08/2013
Black
Board,
Slideshow
presentati
on
12/09/2013
Black
Board,
Slideshow
presentati
on
Remarks
2
Chapter Topic / Details
No.
(Total
Hrs.)
Temperature measurements:
4
1.1 Non-electrical methods- bimetal and liquid
in glass thermometer, pressure
thermometer
1.2 Electrical methods- RTD, platinum
resistance thermometer, Thermistors,
1.3 Thermoelectric methods - elements of
thermocouple, law of intermediate
temperature, law of intermediate metals,
thermo emf measurement.
1.4 Quartz thermometer,
1.5 Pyrometers- radiation and optical
Note: No numerical on above topics.
(Miss. Raut T. G.)
Name & Signature of the Faculty
Allocated Date of
Hrs. in
Commencing
Curriculum Topic
06
19/09/2013
Date of
Completion
of Topic
Teaching
Method/
Media
10/10/2013
Black
Board,
Slideshow
presentati
on
Remarks
(S. B. Sabnis)
Name & Signature of the H.O.D
Note :- One copy should be displayed on Departmental Students’ N.B. at the beginning of the session for students’ reference
3
D-1
For AICTE Diploma Courses
With Effect From 2013-14
Maharashtra State Board of Technical Education
Teaching Plan (TP)
Institute Code No.: 0041
Course and Code: Mechanical Engineering (ME)
Semester: 5
Subject Code: 12156
Name of Faculty: Miss. Raut T.G.
Chapter Topic / Details
Allocated Date of
No.
Hrs. in
Commencing
(Total
Curriculum Topic
Hrs.)
1.7 Significance of measurement, types of
1
measurement,
1.8 classification of instruments
1.9 Static terms and characteristics- Range
and Span, Accuracy and Precision,
Reliability, Calibration, Hysteresis and
Dead zone, Drift, Sensitivity, Threshold
And Resolution, Repeatability and
Reproducibility, Linearity.
1.10 Dynamic characteristics- Speed of
10
26/06/2013
response, Fidelity and Dynamic errors,
Overshoot.
1.11 Measurement of error- Classification of
errors, environmental errors, signal
transmission errors, observation errors,
operational errors.
1.12 Transducers : Classification of
transducers, active and passive, resistive,
inductive, capacitive, piezo-resistive,
Date of
Completion
of Topic
Teaching
Method/
Media
30/07/2013
Black
Board,
Slideshow
presentati
on
Remarks
4
Chapter Topic / Details
No.
(Total
Hrs.)
thermo resistive
Note: Simple numericals on above topics
Control systems:
2
3
1.5 Block diagram of automatic control
system, closed loop system, open loop
system, feedback control system, feed
forward control system, servomotor
mechanism,
1.6 Comparison of hydraulic, pneumatic,
electronic control systems,
1.7 Proportional control actions, integral
control action, derivative control action,
PID control action.
1.8 Applications of measurements and control
for setup for boilers, air conditioners, motor
speed control
Note: No numerical on above topics.
Displacement measurement:
1.5 Capacitive transducer,
1.6 Potentiometer,
1.7 LVDT, RVDT,
1.8 Specification, selection & application of
displacement transducer.
Note: No numerical on above topics.
Allocated Date of
Hrs. in
Commencing
Curriculum Topic
08
04
05/08/2013
02/09/2013
Date of
Completion
of Topic
Teaching
Method/
Media
28/08/2013
Black
Board,
Slideshow
presentati
on
10/09/2013
Black
Board,
Slideshow
presentati
on
Remarks
5
Chapter Topic / Details
No.
(Total
Hrs.)
Temperature measurements:
4
1.6 Non-electrical methods- bimetal and liquid
in glass thermometer, pressure
thermometer
1.7 Electrical methods- RTD, platinum
resistance thermometer, Thermistors,
1.8 Thermoelectric methods - elements of
thermocouple, law of intermediate
temperature, law of intermediate metals,
thermo emf measurement.
1.9 Quartz thermometer,
1.10 Pyrometers- radiation and optical
Note: No numerical on above topics.
(Miss. Raut T. G.)
Name & Signature of the Faculty
Allocated Date of
Hrs. in
Commencing
Curriculum Topic
06
16/09/2013
Date of
Completion
of Topic
Teaching
Method/
Media
08/10/2013
Black
Board,
Slideshow
presentati
on
Remarks
(S. B. Sabnis)
Name & Signature of the H.O.D
Note :- One copy should be displayed on Departmental Students’ N.B. at the beginning of the session for students’ reference
6
With Effect From 2013-14
Maharashtra State Board of Technical Education
Teaching Plan (TP)
Subject Title : MEASUREMENTS AND CONTROL
Course and Code: Mechanical Engineering (ME)
Semester: Fifth
Chapter Topic / Details
No.
(Total
Hrs.)
5
Flow measurements:
(04)
Variable head flow meters-Venturi, Flow nozzle,
Orifice
plate, Pitot tube
Variable area meter-Rota meter
Variable velocity meter-Anemometer
Special flow meter- Hot wire anemometer,
Electromagnetic flow meter, Ultrasonic flow meter
Class- TYME(A)(B)
Subject Code: 12156
Name of Faculty: Mr.Nikam P.R.
Allocated Date of
Date of
Teaching
Hrs. in
Commencing Completion Method/
Curriculum Topic
of Topic
Media
04
01/07/2013
27/07/2013
Remarks
Black
Board,
Slideshow
presentati
on
7
6
(06)
06
Miscellaneous Measurement:
Acoustics measurement- Sound characteristics –
intensity, frequency, pressure, power – sound level
meter, piezoelectric crystal type.
Humidity measurement –Hair hygrometer, Sling
psychrometer, Recording psychrometer
Liquid level measurement – direct and indirect
methods
05/08/2013
31/08/2013
Black
Board,
Slideshow
presentati
on
8
Chapter Topic / Details
Allocated Date of
No.
Hrs. in
Commencing
(Total
Curriculum Topic
Hrs.)
6
10
02/09/2013
Force & Shaft power measurement -Tool
(10)
Dynamometer
(Mechanical Type), Eddy Current Dynamometer,
Strain
Gauge Transmission Dynamometer.
Speed measurement -Eddy current generation
type
tachometer, incremental and absolute type,
Mechanical
Tachometers, Revolution counter & timer, Slipping
Clutch Tachometer, Electrical Tachometers, Eddy
current Drag Cup Tachometer, Magneticand
photoelectric pulse counting methods, Contact less
Electrical tachometer, Inductive Pick Up,
Capacitive
Pick Up, Stroboscope
Strain Measurement-Stress-strain relation, types
of
strain gauges, strain gauge materials, resistance
strain
gauge- bonded and unbounded, types(foil,
semiconductor, wire wound gauges), selection and
installation of strain gauges load cells, rosettes
Date of
Completion
of Topic
Teaching
Method/
Media
31/10/2013
Black
Board,
Slideshow
presentati
on
Remarks
9
(Mr.Nikam P.R.)
Name & Signature of the Faculty
(S. B. Sabnis)
Name & Signature of the H.O.D.
10