SECTION 02829
ELECTRIC GATE OPERATORS
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2006 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
SECTION INCLUDES
A.
Electric Gate Operators:
1.
Residential/Light Commercial DC Linear Actuator (LiftMaster Model LA500DC).
2.
Residential DC Linear Actuator (LiftMaster Model LA400DC).
3.
Solar Residential DC Linear Actuator (LiftMaster Model LA412DC).
4.
Residential underground swing gate operators (CAME by LiftMaster Model FROG).
5.
Residential column-mount swing gate operators (CAME by LiftMaster Model FERNI).
6.
Commercial High Traffic DC Swing Gate Operator (LiftMaster Model CSW24U).
7.
Residential/Light Commercial DC Swing Gate Operator (LiftMaster Model RSW12U).
8.
Commercial AC swing gate operators (LiftMaster Model CSW200 Series).
a.
High-traffic commercial swing gate operators (LiftMaster Model CSW200501U).
b.
High-traffic commercial swing gate operators (LiftMaster Model CSW200101U).
9.
Commercial High Traffic DC Slide Gate Operator (LiftMaster Model CSL24U).
10.
Residential/Light Commercial DC Slide Gate Operator (LiftMaster Model RSL12U).
11.
Residential slide gate operators (CAME by LiftMaster Model BX-243 Series).
12.
Commercial AC slide gate operators (LiftMaster Model SL3000 Series).
a.
High-traffic commercial slide gate operators (LiftMaster Model SL3000501U).
b.
Dual-motor/high-temperature commercial slide gate operators (LiftMaster
Model SL3000101U).
13.
Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL595).
14.
Heavy-duty, industrial, gear-driven slide gate operators (LiftMaster Model SL585).
15.
High-performance commercial DC barrier gate operators with built-in Battery Backup
(LiftMaster Model MA Series).
16.
High-speed commercial DC barrier gate operators with built-in Battery Backup
(LiftMaster Model MAS Series High Speed).
17.
Heavy-duty industrial barrier gate operators (LiftMaster Model BG770).
18.
Heavy-duty industrial barrier gate operators (LiftMaster Model BG790).
19.
Commercial overhead door and gate operators (LiftMaster Model HCT Series).
a.
Overhead door and gate operators (LiftMaster Model HCT501103-8).
b.
Overhead door and gate operators (LiftMaster Model HCT501103-10).
c.
Overhead door and gate operators (LiftMaster Model HCT501103-12).
B.
Monitored Photo Eyes
1.
Monitored Retro-Reflective Photo Eyes (LiftMaster Model LMRRU)
2.
Monitored Through-Beam Photo Eyes (LiftMaster Model LMTBU)
RELATED SECTIONS
A.
Section 02820 - Fences and Gates: Adjoining fences and gates.
B.
Section 03300 - Cast-in-Place Concrete: Concrete mounting pads.
C.
Section 11150 - Parking control equipment.
02829-1
D.
1.3
1.4
1.5
1.6
1.7
Division 16 - Requirements for electrical connections.
REFERENCES
A.
National Electrical Manufacturers Association (NEMA): NEMA ICS 6 - Industrial Control and
Systems: Enclosures.
B.
Underwriters Laboratories (UL): UL 325 - Standard for Safety for Door, Drapery, Gate,
Louver, and Window Operators and Systems.
C.
Underwriters Laboratories (UL): UL 991 - Standard for Tests for Safety-Related Controls
Employing Solid-State Devices.
D.
International Organization for Standardization: ISO 9001 - Quality Management Systems.
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Product Data: Equipment list, system description, electrical wiring diagrams for installation,
and manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Submit shop drawings showing layout, profiles, and product components,
including anchorage, edge conditions, and accessories.
1.
Operation, installation, and maintenance manuals including wiring diagrams.
2.
Risers, layouts, and special wiring diagrams showing any changes to standard
drawings.
DELIVERY, STORAGE, AND HANDLING
A.
Deliver, store, and handle materials and products in strict compliance with manufacturer's
instructions and industry standards.
B.
Store products indoors in manufacturer's original containers and packaging, with labels
clearly identifying product name and manufacturer. Protect from damage.
QUALITY ASSURANCE
A.
Manufacturer Qualifications: ISO 9001 Certified Manufacturer.
B.
Installer Qualifications: Installation performed by factory authorized contractor specifically
trained in gate operation systems of the type found within this section.
1.
Provide documentation of maintenance and repair service availability for emergency
conditions.
2.
Provide quarterly maintenance for one year following Substantial Completion of the
Project.
WARRANTY
A.
Manufacturer's Standard Limited Warranty:
1.
Warranty Period: 2 years.
2.
Warranty Period: 2 years for operator, 10 years for operator frame.
3.
Warranty Period: 3 years for residential applications.
4.
Warranty Period: 5 years.
5.
Warranty Period: 5 years for commercial applications, 7 years for residential
02829-2
applications.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: LiftMaster, which is located at: 845 Larch Avenue; Elmhurst, IL
60126-1196; Toll Free Tel: 800.282.6225; Fax: 630.516.8412; Email:request info
(specs@liftmaster.com); Web:LiftMaster.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section
01600.
GATE OPERATORS
A.
Gate Operators: LiftMaster LA500DC Residential/Light Commercial DC Linear Actuator.
1.
LiftMaster LA500PKGU Single Actuator Arm package contains:
a.
LA500DC Single Actuator Arm
1)
Full length commercial housing corrosion resistant aluminum.
2)
Molecular bonded self-lubricating drive screw.
b.
LA500CONTU Control Box for single or master/second application.
2.
LiftMaster LA500DCS Second Actuator Arm with junction box and 40 foot (12.2 m)
direct burial cable for primary/secondary applications.
3.
LiftMaster LA500CONTXLMU Alternate Control Box for single or master/second
applications desiring more room for accessories or two 33 Ah batteries for solar
applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements:
a.
115V AC, single phase
b.
230V AC, single phase.
7.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
8.
Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate
at 600 pounds (272 kg).
9.
Recommended Cycles per Day: 300.
02829-3
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Gate Travel Speed: 90-degree opening in 15 to 18 seconds.
Warranty: 2 years.
Wormgear Reduction: Precision machined metal gears contained in lubrication
housing.
Battery Backup: Power Management system draws 14.8 mA when gate is idle.
Provides 500 cycles on Battery Backup with two 7 Ah batteries with remote controls
programmed.
Standby Time: Provides up to 24 days of standby power in the event of a power loss
(excluding accessories).
Solar Capable: See daily solar cycle chart.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
Chassis: Commercial-duty die cast aluminum housing.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance. Standard control box compatible with single or dual gates
with no extra parts.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure primary gate
closes last, avoiding potential damage to the gate.
Synchronized Close: Selectable feature for dual-gate applications with curved
driveways. Monitors the speed and position of each gate and adjusts speed as
necessary to ensure both the gates close at the same time. Only available if two
control boxes are used.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with barrier gate.
02829-4
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
B.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated
manually and maintain limit position once re-engaged.
Chassis: Commercial-duty die cast aluminum housing.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60
degrees C)
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW5 Wireless Commercial Keypad
c.
LiftMaster KPW250 - Wireless Commercial Keypad
d.
LiftMaster SP10W12V - 10W Solar Panel Kit
e.
LiftMaster MG1300 Maglock - 1,300 pound (590 kg) holding force.
f.
LiftMaster 892LT 2-button Security+ 2.0 Learning Remote Control
g.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
h.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
i.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
j.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
Gate Operators: LiftMaster LA400 Residential DC Linear Actuator.
1.
LiftMaster LA400PKGU Single Actuator Arm Package contains:
a.
LA400DC Single Actuator Arm
b.
Cast aluminum corrosion-resistant body, stainless steel piston.
c.
LA400CONTU Control Box for single or master/second application.
2.
LiftMaster LA400DCS Second Actuator Arm with junction box and 40 foot (12.2 m)
direct burial cable for primary/secondary applications.
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
02829-5
a.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
Electrical Power Requirements: 115V AC, single phase
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).
Recommended Cycles per Day: 100.
Gate Travel Speed: 90-degree opening in 15 to 18 seconds.
Warranty: 2 years.
Wormgear Reduction: Precision machined metal gears contained in lubrication
housing.
Battery Backup: Power Management system draws 3.7 mA when gate is idle with
remote controls programmed. Provides 400 cycles on Battery Backup with two 7 Ah
batteries.
Standby Time: Provides up to 97 days of standby power in the event of a power loss
(excluding accessories).
Solar Capable: See daily solar cycle chart.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
Chassis: Commercial-duty die cast aluminum housing.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance. Standard control box compatible with single or dual gates
with no extra parts.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
02829-6
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
wire between them.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure primary gate
closes last, avoiding potential damage to the gate.
Synchronized Close: Selectable feature for dual-gate applications with curved
driveways. Monitors the speed and position of each gate and adjusts speed as
necessary to ensure both the gates close at the same time. Only available if two
control boxes are used.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60
degrees C)
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
g.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
i.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
j.
LiftMaster K1D8080-1CC Expansion Board
k.
LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)
02829-7
C.
Gate Operators: LiftMaster LA412DC Solar Residential DC Linear Actuator.
1.
LiftMaster LA412PKGU Single Actuator Arm Solar Package contains:
a.
LA412DC Single Actuator Arm
1)
Cast aluminum corrosion-resistant body, stainless steel piston.
b.
LA412CONTU Control Box for single or master/second application
c.
10 Watt Solar Panel Kit
2.
LiftMaster LA412DCS Second Actuator Arm with junction box and 40 foot (12.2 m)
direct burial cable for primary/secondary applications.
3.
LiftMaster XLSOLARCONTU Alternate Control Box for single or master/second
applications desiring more room for accessories or two 33 Ah batteries for solar
applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V AC, single phase.
7.
Motor: 12V DC, with soft start/stop operation.
8.
Capacity: 16-foot (4877 mm) gate at 550 pounds (249 kg).
9.
Recommended Cycles per Day: 50.
10.
Gate Travel Speed: 90-degree opening in less than 23 seconds.
11.
Warranty: 2 years.
12.
Wormgear Reduction: Precision machined metal gears contained in lubrication
housing.
13.
Solar Power Management system draws 5.7 mA when gate is idle. Provides 1160
cycles with two 7 Ah batteries.
14.
Standby Time: Provides up to 126 days of standby power in the event of no sun or
loss of AC power.
15.
Solar Capable: See daily solar cycle chart.
16.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
17.
Chassis: Commercial-duty die cast aluminum housing.
18.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
19.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
20.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
02829-8
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance. Standard control box compatible with single or dual gates
with no extra parts.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure primary gate
closes last, avoiding potential damage to the gate.
Synchronized Close: Selectable feature for dual-gate applications with curved
driveways. Monitors the speed and position of each gate and adjusts speed as
necessary to ensure both the gates close at the same time. Only available if two
control boxes are used.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C)
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
02829-9
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
LiftMaster KPW5 Wireless Commercial Keypad
LiftMaster SGLOCK12V Solenoid Lock
LiftMaster SOLPNL10W12V 10 Watt Solar Panel
LiftMaster SOLPNL20W12V 20 Watt Solar Panel
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
LiftMaster K1D8080-1CC Expansion Board
LiftMaster LOOPDETLM Plug-in Loop Detector (requires Expansion Board)
D.
Gate Operators: CAME by LiftMaster FROG Residential Underground Swing Gate Operator.
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
2.
Operation:
a.
Soft stop, precise adjustable speed control.
b.
Manual disconnect for emergency operation.
c.
Timer-to-Close automatically closes the gate after preset time.
d.
Programmable for both single and dual-gate applications.
3.
Capacity: 11-1/2 foot (3505 mm) gate at 880 pounds (399 kg) or 6-1/2 foot (1981 mm)
gate at 1,770 pounds (802 kg).
4.
Warranty: 2 years.
5.
Cover: Galvanized steel.
6.
In-Ground Casing: Coated steel.
7.
Electrical Power Requirements: 120V AC, single phase.
8.
Motor Electrical Power Requirements: 24V DC, continuous duty.
9.
Accessory Power Output: 24V AC, 2A.
10.
Receiver: Security+ 2.0, holds 50 remote controls.
11.
Surge Suppression: On high and low voltage inputs.
12.
Operator Duty Cycle Rating: 25 cycles per day.
13.
Gate Travel Speed: 90-degree opening adjustable in 16 to 45 seconds.
14.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 131 degrees F (55
degrees C).
15.
Accessories: Provide the optional accessories listed below.
a.
CAME by LiftMaster DIR10M Thru-Beam Photo Eyes, 32-4/5 foot (9774 mm)
sensing distance, NC contact.
b.
CAME by LiftMaster DIRL Extruded 16-1/2 inch (419 mm) Aluminum Photo Eye
Mounting Post with Base.
c.
CAME by LiftMaster DIRZ Photo Eye Aluminum Alloy Impact Cover.
d.
LiftMaster LD7LP Low-Power Loop Detector.
e.
LiftMaster 893MAX 3-Button Remote Control.
f.
LiftMaster 890MAX 3-Button Mini Remote Control.
g.
LiftMaster TAC1 Single Tenant Telephone Entry System.
h.
LiftMaster EL25 Single/Multi-Tenant Telephone Entry System.
E.
Gate Operators: CAME by LiftMaster FERNI Residential Column-Mount Gate Operator.
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
2.
Operation:
a.
Soft stop, precise adjustable speed control.
b.
Simple manual disconnect for emergency operation.
c.
Timer-to-Close automatically closes the gate after preset time.
02829-10
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
F.
Capacity: 13-foot (3962 mm) gate at 880 pounds (400 kg) or 6-1/2 foot (1981 mm)
gate at 1,770 pounds (802 kg).
Warranty: 3 years for residential applications.
Mounting: Designed to attach to column or fence post, can be mounted at top, middle
or bottom of gate.
Cover: UV-resistant plastic.
Operator Motor Casing: Aluminum.
Electrical Power Requirements: 120V AC, single phase.
Motor: 24V DC, continuous duty.
Accessory Power Output: 24V AC, 2A.
Receiver: Security+ 2.0, holds 50 transmitters.
Surge Suppression: On high and low voltage inputs.
Operator Duty Cycle Rating: 25 cycles per day.
Gate Travel Speed: 90-degree opening adjustable in 12 to 45 seconds.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 131 degrees F (55
degrees C).
Accessories: Provide the optional accessories listed below.
a.
CAME by LiftMaster DIR10M Thru-Beam Photo Eyes, 32-4/5 foot (9774 mm)
sensing distance, NC contact.
b.
CAME by LiftMaster DIRL Extruded 16-1/2 inch (419 mm) Aluminum Photo Eye
Mounting Post with Base.
c.
CAME by LiftMaster DIRZ Photo Eye Aluminum Alloy Impact Cover.
d.
LiftMaster LD7LP Low-Power Loop Detector.
e.
LiftMaster 893MAX 3-Button Remote Control.
f.
LiftMaster 890MAX 3-Button Mini Remote Control.
g.
LiftMaster TAC1 Single Tenant Telephone Entry System.
h.
LiftMaster EL25 Single/Multi-Tenant Telephone Entry System.
Gate Operators: LiftMaster CSW24U Commercial High Traffic DC Swing Gate Operator.
1.
LiftMaster CSW24U Swing Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements:
a.
115V AC, single phase
b.
230V AC, single phase.
5.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
02829-11
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Capacity: 12 foot (3658 mm) gate at 1,200 pounds (554 kg) or 18-foot (5486 mm) gate
at 600 pounds (272 kg).
Recommended Cycles per Day: Continuous duty.
Gate Travel Speed: 90-degree opening in 13 to 15 seconds.
Warranty: 5 years for commercial applications, 7 years for single-home applications.
Wormgear Reduction: 2 commercial oil bath gearboxes with 900:1 wormgear
reduction running in synthetic oil bath. Hardened output shafts designed for high cycle
applications with frequent loop reversals.
Battery Backup: Power Management system draws 14.8 mA when gate is idle with
remote controls programmed. Provides 146 cycles on Battery Backup with two 7 Ah
batteries or 876 cycles with two 33 Ah batteries.
Standby Time: Provides up to 24 days of standby power in the event of a power loss
with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).
Solar Capable: See daily solar cycle chart.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle,
heavy gate use.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure primary gate
closes last, avoiding potential damage to the gate.
Synchronized Close: Selectable feature for dual-gate applications with curved
driveways. Monitors the speed and position of each gate and adjusts speed as
necessary to ensure both the gates close at the same time.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
02829-12
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with barrier gate.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Emergency Release: Simple-to-use release handle allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C)
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
02829-13
n.
o.
p.
G.
Reader
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
LiftMaster MPEL: Mounting plate for post mount
LiftMaster HTR Heater Kit
Gate Operators: LiftMaster RSW12U Residential/Light Commercial DC Swing Gate
Operator.
1.
LiftMaster RSW12U Swing Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements: 115 V AC, single phase.
5.
Motor: 12V DC, with soft start/stop operation.
6.
Capacity: 12 foot (3658 mm) gate at 600 pounds (272 kg) or 16-foot (4900 mm) gate
at 400 pounds (181 kg).
7.
Recommended Cycles per Day: 250.
8.
Gate Travel Speed: 90-degree opening in 15 to 17 seconds.
9.
Warranty: 3 years.
10.
Wormgear Reduction: 2 commercial oil bath gearboxes with 30:1 wormgear reduction
running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 5.7 mA when gate is idle with
remote controls programmed. Provides 354 cycles on Battery Backup with two 7 Ah
batteries.
12.
Standby Time: Provides up to 126 days of standby power in the event of a power loss
(excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
16.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
17.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
18.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
19.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
02829-14
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle,
heavy gate use.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure primary gate
closes last, avoiding potential damage to the gate.
Synchronized Close: Selectable feature for dual-gate applications with curved
driveways. Monitors the speed and position of each gate and adjusts speed as
necessary to ensure both the gates close at the same time.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Emergency Release: Simple-to-use keyed release handle allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C)
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
02829-15
35.
H.
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
g.
LiftMaster 811LM 1-button Encrypted DIP Remote Control
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
i.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
j.
LiftMaster K1D8080-1CC Expansion Board
k.
LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)
l.
LiftMaster HTR Heater Kit
Gate Operators: LiftMaster CSW200 Series Commercial Swing Gate Operators.
1.
LiftMaster CSW200501U Commercial Swing Gate Operator for high-traffic
applications.
a.
Description: High Cycle High Temperature 1/2 HP continuous duty motor with
class H High Temperature Insulation
b.
Capacity: 8-foot (2438 mm) gate at 1,600 pounds (726 kg) or 18-foot (5486
mm) gate at 600 pounds (272kg)
c.
Recommended Cycles per Hour: Continuous
2.
LiftMaster CSW200101U Commercial Swing Gate Operator with 1 HP capacity for
heavy-duty applications.
a.
Description: Two High Cycle High Temperature 1/2 HP continuous duty motors
with class H High Temperature Insulation, designed for large, heavy wroughtiron gates.
b.
250 pounds (113.4 kg) of pulling torque
c.
Capacity: 12 foot (3658 mm) gate at 2,000 pounds (907 kg) or 22-foot (6706
mm) gate at 1,000 pounds (454 kg).
d.
Recommended Cycles per Hour: Continuous duty.
3.
Warranty: 5 years for commercial applications, 7 years for residential applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V, single phase.
a.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or
02829-16
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
unswitched power.
Wormgear Reduction: 2 Commercial oil bath gearboxes, 900:1 wormgear reduction.
Hardened output shafts designed for high cycle applications with frequent loop
reversals.
Gate Traveling Speed: 90-degree opening in 13-15 seconds.
Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet
metal.
Finishing: Metal parts are gold zinc-plated for rustproof protection.
Cover: High-density UV-resistant polyethylene material.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Soft Stop extends operator life under high-cycle, heavy gate use.
Emergency Release: Release handles allows gate to be operated manually and
maintain limit position once re-engaged.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual
adjustment to control delay as necessary to ensure primary gate closes last, avoiding
potential damage to the gate.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with a barrier gate.
Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs.
Protects against lightning strikes at a 50-foot (15.2 m) radius.
Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.
External Alarm Reset Button: Allows for quick reset of the gate operator when the
alarm has been activated.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for
pre-operation warning; provides 3-second warning prior to and during gate movement.
Mechanical Limit System: Maintains accurate gate position throughout gate travel,
even after using manual disconnect.
Operating Temperature Range:
02829-17
a.
b.
30.
31.
32.
I.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F(60
degrees C).
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Advanced Traffic Management Quick-Close Option
Gate Operators: LiftMaster CSL24U Commercial High Traffic DC Slide Gate Operator.
1.
LiftMaster CSL24U Slide Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
02829-18
c.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
Electrical Power Requirements:
a.
115V AC, single phase
b.
230V AC, single phase.
Motor: 24V DC, with soft start/stop operation.
a.
Duty cycle: Continuous duty.
Capacity: 50-foot (15200 mm) gate at 1,500 pounds (680 kg).
Recommended Cycles per Day: Continuous duty.
Gate Travel Speed: 12 inches (304 mm) per second.
Warranty: 5 years for commercial applications, 7 years for single-home applications.
Wormgear Reduction: Commercial oil bath gearbox with 10:1 wormgear reduction
running in synthetic oil bath.
Battery Backup: Power Management system draws 14.8 mA when gate is idle with
remote controls programmed. Provides 208 cycles on Battery Backup with two 7 Ah
batteries or 1179 cycles with two 33 Ah batteries.
Standby Time: Provides up to 24 days of standby power in the event of a power loss
with two 7 Ah batteries or 105 days with two 33 Ah batteries (excluding accessories).
Solar Capable: See daily solar cycle chart.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
Cover: High-density, UV-resistant polycarbonate two-piece cover.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual disconnect.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
02829-19
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
wire between them.
PosiLock: Automatically powers the operator and returns a gate to the closed position
when gate is pushed off of its closed limits.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure both the gates
close at the same time.
Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed
and position of each gate and adjusts speed as necessary to ensure both the gates
close at the same time.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with barrier gate.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C)
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
02829-20
39.
J.
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
n.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force
o.
LiftMaster MPEL: Mounting plate for post mount
p.
LiftMaster HTR Heater Kit
Gate Operators: LiftMaster RSL12U Residential/Light Commercial DC Slide Gate Operator.
1.
LiftMaster RSL12U Slide Gate Operator.
2.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
3.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
8 Monitored edges available when Transceiver is added.
4.
Electrical Power Requirements: 115V AC, single phase
5.
Motor: 12V DC, with soft start/stop operation.
6.
Capacity: 25 foot (7600 mm) gate at 800 pounds (363 kg).
7.
Recommended Cycles per Day: 120.
8.
Gate Travel Speed: 10 inches (254 mm) per second.
9.
Warranty: 3 years.
10.
Wormgear Reduction: 15:1 wormgear reduction running in synthetic oil bath.
11.
Battery Backup: Power Management system draws 5.7 mA when gate is idle with
remote controls programmed. Provides 281 cycles on Battery Backup with two 7 Ah
batteries.
12.
Standby Time: Provides up to 126 days of standby power in the event of a power loss
(excluding accessories).
13.
Solar Capable: See daily solar cycle chart.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
15.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
02829-21
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
Cover: High-density, UV-resistant polyethylene cover.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Electronic Limits: Maintains accurate limit position throughout travel, even after using
the manual disconnect.
Dual-gate operation capabilities to allow 2 separate gate operators to operate in
unison at a single entrance.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for Through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
PosiLock: Automatically powers the operator and returns a gate to the closed position
when gate is pushed off of its closed limit.
Bi-Part Delay: Selectable feature for dual-gate applications. Firmware monitors speed
and position of each gate and adjusts speed as necessary to ensure both the gates
close at the same time.
Synchronized Close: Selectable feature for dual-gate applications. Monitors the speed
and position of each gate and adjusts speed as necessary to ensure both the gates
close at the same time.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate to auto open on power
failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs. Protects
against lightning strikes at a 50-foot (15240 mm) radius.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate to be operated
manually and maintain limit position once re-engaged.
Operating Temperature Range:
a.
Without Heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C)
b.
With Optional Heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C)
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from Internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
02829-22
1)
2)
3)
35.
K.
LiftMaster LMRRU Reflective Photo Eyes.
LiftMaster LMTBU Thru-Beam Photo Eyes.
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster KPW5 Wireless Commercial Keypad
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster SP10W12V: 10W Solar Panel Kit
d.
LiftMaster MG1300 Maglock. 1,300 pound (590 kg) holding force.
e.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.
f.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.
g.
LiftMaster 811LM 1-button Encrypted DIP Remote Control.
h.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
Gate Operators: CAME by LiftMaster BX-243 Series Residential Slide Gate Operators.
1.
CAME by LiftMaster BX-243C Chain Drive Operator, 28-foot (8534 mm) zinc steel coil
chain, lubrication not required.
2.
CAME by LiftMaster BX-243R Rack and Pinion Drive Operators, rack in polyamidecovered steel sections.
3.
CAME by LiftMaster BX-243R Rack and Pinion Drive Operators, rack in steel
sections.
4.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular swing gate
applications.
5.
Operation:
a.
Soft stop.
b.
Partial opening feature for motorcycle access.
c.
Simple manual disconnect for emergency operation.
d.
Timer-to-Close automatically closes the gate after preset time.
6.
Capacity: Up to a 25-foot (7620 mm) gate at 660 pounds (300 kg).
7.
Warranty: 3 years for residential applications.
8.
Operator Chassis: Cast aluminum.
9.
Pan Mounting Plate: Galvanized steel.
10.
Electrical Power Requirements: 120V AC, single phase.
11.
Motor Electrical Power Requirements: 24V DC, continuous duty.
12.
Accessory Power Output: 24V AC, 1.5A.
13.
Receiver: Security+ 2.0, holds 50 remote controls.
14.
Surge Suppression: On high and low voltage inputs.
15.
Operator Duty Cycle Rating: 25 cycles per day.
16.
Gate Travel Speed: 7-1/2 inches (190 mm) per second.
17.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 131 degrees F (55
degrees C).
18.
Accessories: Provide the optional accessories listed below.
a.
CAME by LiftMaster DIR10M Thru-Beam Photo Eyes, 32-4/5 foot (9774 mm)
sensing distance, NC contact.
02829-23
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
L.
CAME by LiftMaster DIRL Extruded 16-1/2 inch (419 mm) Aluminum Photo Eye
Mounting Post with Base.
CAME by LiftMaster DIRZ Photo Eye Aluminum Alloy Impact Cover.
LiftMaster LD7LP Low-Power Loop Detector.
LiftMaster 893MAX 3- Button Remote Control.
LiftMaster 890MAX 3- Button Mini Remote Control.
LiftMaster TAC1 Single Tenant Telephone Entry System.
LiftMaster EL25 Single/Multi-Tenant Telephone Entry System.
LiftMaster EL1SS Stainless Steel Single/Multi-Tenant Telephone Entry System
LiftMaster K1D8080-1CC Expansion Board
LiftMaster LOOPDETLM Plug-in Loop Detector (requires expansion board)
LiftMaster HTR Heater Kit
Gate Operators: LiftMaster SL3000 Series Commercial Slide Gate Operators.
1.
LiftMaster SL3000501U Commercial Slide Gate Operator for high-traffic applications.
a.
High Cycle High Temperature 1/2 HP Continuous Duty Motor with Class H High
Temperature Insulation.
b.
Maximum Gate Weight: 1,000 pounds (454 kg.).
c.
Maximum Gate Length: 37 feet (11.2 m).
d.
Recommended Cycles/Hour: Continuous duty.
2.
LiftMaster SL3000101U Commercial Slide Gate Operator with 1 HP capacity for
heavy-duty applications.
a.
Description: Two High Cycle High Temperature 1/2 HP motors with Class H
High Temperature Insulation and a heavy-duty transmission, designed for
large, heavy wrought-iron gates.
b.
Pulling Torque: 210 pounds (95.2 kg) of pulling torque.
c.
Maximum Gate Weight: 2,000 pounds (907.2 kg).
d.
Maximum Gate Length: 37 feet (11.3 m).
e.
Recommended Cycles/Hour: Continuous duty.
3.
Warranty: 5 years for commercial applications, 7 years for residential applications.
4.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
5.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
6.
Electrical Power Requirements: 115V, single phase.
a.
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched or
unswitched power.
7.
Wormgear Reduction: Commercial oil bath gearboxes, 30:1 wormgear reduction.
8.
Gate Traveling Speed: 12 inches (305 mm) per second.
02829-24
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
Chassis: Constructed with 1/4-inch (6 mm) sanded, welded and gold zinc-plated sheet
metal.
Finishing: Metal parts are gold zinc-plated for rustproof protection.
Cover: High-density UV-resistant polyethylene material.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
Inherent Reversing Sensor: Detects obstructions or increased loads. Reverses gate
when closing or stops/reverses the gate when opening.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a
power loss without removing the operator cover. Connect to optional Fire Department
Box to meet local fire code.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
Bi-Part Delay: Selectable feature for dual-gate applications. Dial provides manual
adjustment to control delay as necessary to ensure primary gate closes last, avoiding
potential damage to the gate.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with a barrier gate.
Surge/Lightning Protection: Industrial surge protection on high and low voltage inputs.
Protects against lightning strikes at a 50-foot (15.2 m) radius.
Plug-in loop detector inputs: Programmed inputs for shadow, interrupt and exit.
External Alarm Reset Button: Allows for quick reset of the gate operator when the
alarm has been activated.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for
pre-operation warning; provides 3-second warning prior to and during gate movement.
Mechanical Limit System: Maintains accurate gate position throughout gate travel,
even after using manual disconnect.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C).
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internet-
02829-25
enabled computer, tablet or smartphone.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat treated
wheels.
b.
30.
31.
M.
Gate Operators: LiftMaster SL595 Industrial Gear-Driven Slide Gate Operator.
1.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
2.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
02829-26
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
Warranty: 2 years.
Operator Speed: 12 inches (305 mm) per second.
Electrical Power Requirements:
a.
115/208/230V AC, single phase, 60 Hz.
b.
208/230/460/575V AC, 3-phase, 60 Hz.
Accessory Electrical Power Requirements: 24V AC.
a.
Main Board: 12V AC, maximum 500mA.
b.
Terminal Strip:
1)
2.2A maximum for 115/208-230V AC, single phase.
2)
2.2A maximum for 208/230-460 V AC, three phase
3)
1.3A maximum for 575V AC, three phase
Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.
Motor: Switchless 1 HP, continuous duty
a.
Capacity: Supports gate lengths up to 70 feet (21.5 m) and gate weights up to
1,700 pounds(71 kg).
b.
Recommended Cycles per Hour: 25.
Motor: Switchless 1 1/2HP, continuous duty (115/230V, single phase only).
a.
Capacity: Supports gate lengths up to 80 feet (24.4 m) and gate weights up to
2,100 pounds (953 kg).
b.
Recommended Cycles per Hour: 25.
Motor: Switchless 2 HP, continuous duty (208/230/460/575V, 3- phase only).
a.
Capacity: Supports gate lengths up to 80 feet (27.4 m) and gate weights up to
2,500 pounds (1134 kg).
b.
Recommended Cycles per Hour: 25.
Metal Frame: 7 gauge pre-galvanized steel.
Chassis: Powder-coated galvanized steel.
Enclosure: NEMA 3R enclosure; oil-tight, weatherproof NEMA 3R cabinet, lockable.
Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.
Gearbox: All-weather.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect
obstructions or increased loads. Reverses gate when closing or stops/reverses the
gate when opening.
Lockout/Tagout: Prevents power from being switched on when servicing operator.
Safeguards workers from high voltage power.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
02829-27
b.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
Support for through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with a barrier gate.
Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs.
Protects against lightning strikes at a 50-foot (15.2m) radius.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
External Alarm Reset Button: Allows for quick reset of the gate operator when the
alarm has been activated.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for
pre-operation warning; provides a 3-second warning prior to and during gate
movement.
Maximum Run Timer: Protects against damage to the gate and operator by limiting
the unit's runt time to 120 seconds.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a
power loss without removing the operator cover.
Mechanical Braking: the mechanical braking system adds substantial gate position
control at all points in travel. The solenoid-actuated b rake system also prevents the
gate from being back-driven
Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage
should the gate meet an obstruction.
Limit Settings: Driven limit nut switches are fully adjustable to provide precision,
accuracy and reliability.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C).
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
02829-28
38.
N.
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
h.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
i.
LiftMaster Star1000 Commercial Access Control Receiver
j.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
k.
LiftMaster PPV1 Passport 1-Button Remote
l.
LiftMaster PPK1 Passport 1-Button Mini Remote
m.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
n.
LiftMaster HTRNB Heater Kit
o.
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated
wheels
Gate Operators: LiftMaster SL585 Industrial Gear-Driven Slide Gate Operator.
1.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular slide gate
applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
2.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
3.
Warranty: 2 years.
4.
Operator Speed: 11 inches (279.4 mm) per second.
5.
Electrical Power Requirements:
a.
115/208/230V AC, single phase, 60 Hz.
b.
208/230/460/575V AC, 3-phase, 60 Hz.
6.
Accessory Electrical Power Requirements: 24V AC.
a.
Main Board: 12V AC, maximum 500mA.
b.
Terminal Strip:
02829-29
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
1)
2.2A maximum for 115/208-230V AC, single phase.
2)
2.2A maximum for 208/230-460 V AC, three phase
3)
1.3A maximum for 575V AC, three phase
Gear Reduction: 20:1 wormgear reducer in synthetic oil bath.
Motor: Switchless 1/2 HP, continuous duty
a.
Capacity: Supports gate lengths up to 45 feet (13 m) and gate weights up to
1,000 pounds(454 kg).
b.
Recommended Cycles per Hour: 20.
Motor: Switchless 1 HP, continuous duty.
a.
Capacity: Supports gate lengths up to 70 feet (21 m) and gate weights up to
1,600 pounds (725 kg).
b.
Recommended Cycles per Hour: 20.
Motor: Switchless 1 1/2 HP, continuous duty (115/230V, single phase only).
a.
Capacity: Supports gate lengths up to 75 feet (23 m) and gate weights up to
1,900 pounds (862 kg).
b.
Recommended Cycles per Hour: 20.
Metal Frame: 7 gauge pre-galvanized steel.
Chassis: Powder-coated galvanized steel.
Enclosure: Weather-resistant, lockable, 16-gauge steel cover.
Chain: #50 nickel-plated, 25 feet (7620 mm) supplied with each unit.
Gearbox: All-weather.
Internet Connectivity: MyQ Technology.
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board radio receiver, holds up to 50 remote controls
(unlimited with use of 811LM/813LM), HomeLink compatible
b.
Transmits 310 MHz, 315MHz, 390 MHz
Inherent Reversing Sensor: Utilizes Current Sense and RPM Sensor to detect
obstructions or increased loads. Reverses gate when closing or stops/reverses the
gate when opening.
Lockout/Tagout: Prevents power from being switched on when servicing operator.
Safeguards workers from high voltage power.
Wireless Dual-Gate Operation:
a.
Built-in wireless communication will operate primary and secondary operator
without having to run a communication wire.
b.
Support for through-beam photo eye in the wireless dual-gate setup. Can
attach emitter and receiver to each operator, eliminating the communication
wire between them.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each.
a.
Pre-warning or gate-in motion sounder
b.
Switch on/off devices at open or Close Limits or while gate is in motion.
c.
Tamper detection if gate is pushed off Close Limit
d.
Cycle quantity feedback.
e.
Red/Green Light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with a barrier gate.
Surge/Lightning Protection: Industrial Surge Protection on high and low voltage inputs.
02829-30
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
Protects against lightning strikes at a 50-foot (15.2m) radius.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
External Alarm Reset Button: Allows for quick reset of the gate operator when the
alarm has been activated.
Warning Device: UL 325 compliant entrapment warning alarm has ability to be set for
pre-operation warning; provides a 3-second warning prior to and during gate
movement.
Maximum Run Timer: Protects against damage to the gate and operator by limiting
the unit's runt time to 120 seconds.
Lockable External Manual Disconnect: Allows gate to be opened in the event of a
power loss without removing the operator cover.
Mechanical Braking: the mechanical braking system adds substantial gate position
control at all points in travel. The solenoid-actuated b rake system also prevents the
gate from being back-driven
Friction Clutch: Adjustable friction clutch helps protect gate and operator from damage
should the gate meet an obstruction.
Limit Settings: Driven limit nut switches are fully adjustable to provide precision,
accuracy and reliability.
Universal Footprint: Easily adapts operator to common footprints. Simplifies retrofit
applications by adapting to pre-existing pads for Link, Stanley or LiftMaster operators.
Operating Temperature Range:
a.
Without heater: -4 degrees F (-20 degrees C) to 140 degrees F (60 degrees C).
b.
With optional heater: -40 degrees F (-40 degrees C) to 140 degrees F (60
degrees C).
MyQ Enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer, tablet or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 - Wireless Commercial Keypad
c.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control
d.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control
e.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control
f.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control
g.
LiftMaster IPAC - Internet Protocol Access Control Entry System
02829-31
h.
i.
j.
k.
l.
m.
n.
o.
O.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System.
LiftMaster Star1000 Commercial Access Control Receiver
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
LiftMaster PPV1 Passport 1-Button Remote
LiftMaster PPK1 Passport 1-Button Mini Remote
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
LiftMaster HTRNB Heater Kit
LiftMaster Power Wheels, 4 inch (101 mm) or 6 inch (152 mm) heat-treated
wheels.
Gate Operators: LiftMaster MA Series High-Performance Commercial Barrier Gate
Operators with Built-in Battery Backup.
1.
LiftMaster MA Mega Arm Barrier Gate Operators with plastic cover.
2.
LiftMaster MAT Mega Arm Barrier Gate Operators with aluminum cover.
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate
applications.
4.
Warranty: 2 years for operator, 10 years for operator frame.
5.
Operation:
a.
Soft start/stop.
b.
Universal Controller: 8 inputs right or left-handed operation safety-stop.
c.
Anti-tailgate, quick-close features.
d.
Selectable Auto Open: 15 seconds after power failure or upon battery depletion
barrier arm can be set to automatically open. 15-second delay helps reduce
nuisance callbacks due to short power interruptions or brownouts.
6.
Operator Speed: Open or close speed of 2.5 seconds.
7.
Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it
will break away and can be re-installed; can be set up for right or left-hand mount.
8.
Gate Arm: Arm one, articulating arm for low headroom environments.
9.
Gate Arm: Arm two, yellow.
10.
Gate Arm: Arm three, red/white retro-reflectorized DOT tape.
a.
Gate Arm Length: 12 feet (3658 mm).
b.
Gate Arm Length: 17 feet (5182 mm).
11.
Gate Arms: Arm four, yellow padded arm, 12 feet (3658 mm) and 14 feet (4267 mm)
long.
12.
Motor: 1/2 HP, 24V DC, 800 RPM motor, 6,000 cycles per day.
13.
Electrical Power Requirements: 120/220V AC.
14.
Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for
accessory power.
15.
Gear Reduction: 60:1 reducer in synthetic oil bath.
16.
Chassis: Powder-coated 1/4-inch (6 mm) aluminum alloy.
17.
Drive System: No. 80 gearbox.
18.
Built-in Receiver: Single remote control solution for gate access and additional access
points. Ability to add up to 50 remote control.
19.
Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts
to wear out, provide reliable operation.
20.
Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.
21.
Auxiliary Outlet: Powers accessories devices.
22.
Battery Backup: Provides operation during power outages to maintain traffic flow.
23.
Automatically resets to normal operation when power is restored; provides up to 900
full cycles with a 12 foot (3658 mm) arm.
24.
Accessories: Provide the optional accessories listed below.
a.
Clutch: Allows arm to be manually pushed open. Arm automatically resets to
02829-32
b.
c.
d.
e.
f.
g.
h.
i.
j.
P.
normal closed position upon receiving activation. Ideal for areas that are
concerned with vandals damaging arm.
LiftMaster EL2000 Commercial and Gated Community Telephone Entry
System.
LiftMaster STAR1000 Commercial Access Control Receiver.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.
1)
LiftMaster PPV1 Passport 1-Button Remote.
2)
LiftMaster PPK1 Passport 1-Button Mini Remote.
LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.
LiftMaster LD7LP Low-Power Loop Detector.
LiftMaster 361LM 1-Button Remote Control.
LiftMaster 363LM 3-Button Remote Control.
Gate Operators: LiftMaster MAS Series High-Speed Commercial Barrier Gate Operators
with Built-in Battery Backup.
1.
LiftMaster MAS Mega Arm Barrier Gate Operators with plastic cover.
2.
LiftMaster MAST Mega Arm Barrier Gate Operators with aluminum cover.
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate
applications.
4.
Warranty: 2 years.
5.
Operation:
a.
Soft start/stop.
b.
Universal Controller: 8 inputs right or left-handed operation safety-stop.
c.
Anti-tailgate, quick-close features.
d.
Selectable Auto Open: 15 seconds after power failure or upon battery depletion
barrier arm can be set to automatically open. 15-second delay helps reduce
nuisance callbacks due to short power interruptions or brownouts.
6.
Operator Speed: Open or close speed of 0.9 second.
7.
Gate Arm: Breakaway arm; held in place with breakaway retaining nuts. If arm is hit, it
will break away and can be re-installed; can be set up for right or left-hand mount.
8.
Gate Arm: Length 8 feet (2438 mm) long, yellow padded arm.
9.
Motor: 1/2 HP, 24V DC, 800 RPM motor, 10,000 cycles per day.
10.
Electrical Power Requirements: 120/220V AC.
11.
Accessory Electrical Power Requirements: 24V DC 500 mA Battery Backup for
accessory power.
12.
Gear Reduction: 60:1 wormgear reduction in synthetic oil bath.
13.
Chassis: Powder-coated 1/4-inch (6.35 mm) T-6 aluminum alloy.
14.
Drive System: No. 80 gearbox.
15.
Built-in Receiver: Single remote control solution for gate access and additional access
points. Ability to add up to 50 remote controls.
16.
Magnetic Limit Sensors: Designed for high-cycle applications, contain no moving parts
to wear out, provide reliable operation.
17.
Surge Protection: Built-in at point of incoming line voltage from power spikes, surges.
18.
Auxiliary Outlet: Powers accessories devices.
19.
Battery Backup: Provides operation during power outages to maintain traffic flow.
Automatically resets to normal operation when power is restored; provides up to
20.
900 full cycles with a 12 foot (3658 mm) arm.
21.
Accessories: Provide the optional accessories listed below.
a.
Clutch: Allows arm to be manually pushed open. Arm automatically resets to
normal closed position upon receiving activation. Ideal for areas that are
concerned with vandals damaging arm.
b.
LiftMaster EL2000 Commercial and Gated Community Telephone Entry
02829-33
c.
d.
e.
f.
g.
h.
i.
j.
Q.
System.
LiftMaster STAR1000 Commercial Access Control Receiver.
LiftMaster 811LM 1-Button Encrypted DIP Remote Control.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology.
1)
LiftMaster PPV1 Passport 1-Button Remote.
2)
LiftMaster PPK1 Passport 1-Button Mini Remote.
LiftMaster KPR2000 Single Access Control Keypad and Proximity Reader.
LiftMaster LD7LP Low-Power Loop Detector.
LiftMaster 361LM 1-ButtonRemote Control.
LiftMaster 363LM 3-Button Remote Control.
Gate Operators: LiftMaster BG770 Industrial Barrier Gate Operator.
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate
applications.
2.
Warranty: 2 years.
3.
Operator Speed: 90-degrees in 4 seconds.
4.
Gate Arms: Standard, 12 foot (3658 mm) wood arms.
5.
Gate Arms: Provide optional 10-foot (3048 mm) PVC arms.
6.
Gate Arms: Provide optional 15-foot (4572 mm) aluminum arms, square, yellow and
black stripes.
7.
Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 115V AC.
b.
Accessory Electrical Power Requirements: One, 24V AC.
8.
Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 24V AC.
9.
Gear Reduction: 60:1 wormgear reduction in oil bath.
10.
Motor: 1/2 HP, continuous duty.
11.
Metal Frame: 11-gauge pre-galvanized steel.
12.
Enclosure: Powder-coated weather-resistant steel enclosure.
13.
Configuration: Standard.
14.
Configuration: Reverse cabinet modification: In the event of an obstruction close by
the barrier gate the cabinet can be reversed to allow access to cabinet door.
15.
Control Inputs: Control inputs allow the connection of optional external devices like
loop detectors, photo eyes, telephone entry systems, access control systems and
radio receivers.
16.
Limit Settings: Driven limit cams are fully adjustable.
17.
Accessories: Provide the optional accessories listed below.
a.
SAMS Limit Switch Modification: Compatible with sequenced access
management systems, as a single or pair; compatible with systems with a GL
control board.
b.
Dual-Gate Capability: Supports the operation of 2 separate gate operators in
unison at a single entrance, assuring consistent, simultaneous open/close cycle
for both operators and is bi-part capable.
c.
Timer-to-Close: Programmable module can be set from 1 to 1,024 seconds.
The unit will automatically close when programmed time has expired.
d.
Plug-in Style Loop Detectors: Operator incorporates 2-harness support system
that can accept up to 2 plug-in loop detectors for exit or hold-open functions.
e.
Long-Distance Wiring Module: Allows mounting accessories or controls beyond
100 feet (30 m) from the operator.
f.
Flex Red Light Strip: 10 feet (3048 mm) long.
g.
Thermostatically Controlled Heater: For use in extreme cold environments.
h.
Single-Button Radio Modification: Enables radio control to both open and close
the barrier arm.
02829-34
R.
Gate Operators: LiftMaster BG790 Industrial Barrier Gate Operator.
1.
Compliance: ETL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class I, II, III and IV vehicular barrier gate
applications.
2.
Warranty: 2 years.
3.
Operator Speed: 11 seconds opening time.
4.
Electrical Power Requirements: 115/208/230V AC, single phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 115V AC.
b.
Accessory Electrical Power Requirements: One, 24V AC.
5.
Electrical Power Requirements: 208/230/460/575V AC, 3-phase, 60 Hz.
a.
Accessory Electrical Power Requirements: One, 24V AC.
6.
Gear Reduction: 60:1 wormgear reducer in oil bath.
7.
Motor: 1/2 HP, continuous duty.
8.
Metal Frame: 11-gauge pre-galvanized steel.
9.
Gate Arms: Includes 24-foot (7315 mm) wishbone arm with black and white stripes
and 2 counterweights.
10.
Enclosure: Powder-coated weather-resistant steel enclosure.
11.
Configuration: Standard.
12.
Configuration: Reverse cabinet modification: In the event of an obstruction close by
the barrier gate the cabinet can be reversed to allow access to cabinet door.
13.
Control Inputs: Control inputs allow the connection of optional external devices like
loop detectors, photo eyes, telephone entry systems, access control systems and
radio receivers.
14.
Limit Settings: Driven limit cams are fully adjustable.
15.
Accessories: Provide the optional accessories listed below.
a.
Dual-Gate Capability: Supports the operation of 2 separate gate operators in
unison at a single entrance, assuring consistent, simultaneous open/close cycle
for both operators and is bi-part capable.
b.
Timer-to-Close: Programmable module can be set from 1 second to 17
minutes. The unit will automatically close when programmed time has expired.
c.
Plug-in Style Loop Detectors: Operator incorporates 2-harness support system
that can accept up to 2 plug-in loop detectors for exit or hold-open functions.
d.
Long-Distance Wiring Module: Allows mounting accessories or controls beyond
100 feet (30 m) from the operator.
e.
Flex Red Light Strip: 10 feet (3048 mm) long.
f.
Thermostatically Controlled Heater: For use in extreme cold environments.
g.
Single-Button Radio Modification: Enables radio control to both open and close
the barrier arm.
S.
Gate Operators: LiftMaster HCT Series Heavy-Duty, High-Cycle Trolley Gate Operators.
1.
LiftMaster HCTDCU Overhead Door and Gate Operator
2.
HCTU Rail Length Options:
a.
HCT08 - 8 feet (2438 mm)
b.
HCT10 - 10 feet (3048 mm)
c.
HCT12 - 12 feet (3658 mm)
3.
Compliance: UL Listed. Compliant to the UL 325, UL 991 and CSA C22.2 No. 247
standards.
a.
This model is intended for use in Class II, III and IV vehicular gate applications.
b.
To be UL 325 compliant, two independent safety entrapment protection devices
must be installed at each entrapment zone (the inherent reversing system in
this gate operator counts as one device). Devices such as monitored photo
eyes or edge sensors are required to be installed with this operator.
c.
Only LiftMaster monitored photo eyes or edge sensors may be used with this
operator to meet the UL 325 Standard.
4.
Monitored Safety Inputs: 3 inputs per board (main board and expansion board)
02829-35
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
totaling 6 inputs with any combination of up to:
a.
Main Board:
1)
1 Monitored Close Photo Eye input
2)
1 Monitored Open Photo Eye input
3)
1 Monitored Open Safety Edge or Open Photo Eye input
b.
Expansion Board
1)
2 Monitored Safety Edge or Photo Eye inputs (selectable for Open or
Close).
2)
1 Monitored Photo Eye input (selectable for Open or Close).
c.
8 Monitored edges available when Transceiver is added.
Electrical Power Requirements:
a.
115V AC, single phase
b.
230V AC, single phase.
Motor: 24 DC, with soft start/stop operation.
a.
Duty cycle: Continuous
Capacity: 12 foot (3658 mm) overhead door or gates up to 800 pounds (363 kg)
Recommended Cycles per Day: Continuous
Gate/Door Travel Speed: 8 inches (305 mm) per second
Warranty: 5 years for commercial applications, 7 years for single-home applications.
Wormgear Reduction: Commercial oil bath gearbox with 28:1 ratio wormgear
reduction running in synthetic oil bath.
Battery Backup: Power Management system draws 14.8 mA when gate or door is idle
with remote controls programmed. Provides 112 cycles on Battery Backup with two
7Ah batteries.
Standby Time: Proves up to 72 days of standby power in the event of a power loss
with two 7Ah batteries (excluding accessories).
Accessory Electrical Power Requirements: 24V DC 500 mA output, switched and
unswitched power.
Chassis: Constructed with 1/4 inch (6mm) gold zinc-plated steel for rust prevention.
Trolley Assembly: Heavy-duty 12-gauge steel track with 6 UHMW rollers
Noise Isolators: Designed for exceptionally quite performance.
Internet Connectivity: MyQ Technology
a.
902 to 928 MHz
b.
50-channel FHSS (Frequency Hopping Spread Spectrum).
c.
LiftMaster 828LM Internet Gateway enables monitoring and control of gate
operators via internet-enabled smartphone, tablet or computer.
d.
Provides two-way communication between gate operator and MyQ accessories
to enable remote open, close and monitoring of gate.
Receiver:
a.
Security+ 2.0 3-channel on-board receiver, holds up to 50 remote controls,
HomeLink compatible
b.
Transmits 310 MHz, 315 MHz, 390 MHz.
Electronic limits: Maintains accurate limit position throughout travel, even after using
the manual release handle.
Soft Stop & Start during mid-travel reversal extends operator life under high-cycle,
heavy gate use.
LED Diagnostic Display: Simplifies installation and troubleshooting.
Colored Terminal Blocks: Provides easy identification of safety and fire department
inputs.
Programmable Auxiliary Relays: 2 programmable relays with 6 settings each
a.
Pre-warning or gate-in-motion sounder.
b.
Switch on/off devices at open or Close Limits or while gate is in motion..
c.
Tamper detection if gate is pushed off Close Limit.
d.
Cycle quantity feedback.
e.
Red/Green light to control gate traffic.
Quick Close, Anti-Tailgate: Quickly secures property, preventing unauthorized access.
02829-36
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
T.
Sequenced Access Management: Capable of sequentially controlling the operator in
tandem with barrier gate.
Plug-in Loop Detector Inputs: Programmed inputs for shadow, interrupt and exit.
Alarm Reset Button: Instantly resets the built-in safety alarm siren.
Fire Department Compliant: Selectable settings allow gate or door to auto open and
power failure or battery depletion.
Surge Suppression: Industrial strength on high and low voltage outputs.
Keyed Manual Disconnect: Simple-to-use disconnect allows gate or door to be
operated manually and maintain limit position once re-engaged.
Operating Temperature Range: -4 degrees F (-20 degrees C) to 140 degrees F (60
degrees C)
MyQ enabled Accessories:
a.
LiftMaster 828LM Internet Gateway: Allows remote monitoring from internetenabled computer or smartphone.
b.
LiftMaster 829LM Garage and Gate Monitor: Allows remote monitoring and
operation.
c.
LiftMaster 823LM Remote Light Switch: Controls light remotely.
d.
LiftMaster 825LM Remote Light Control: Allows remote monitoring and
operation.
Accessories: Safety Monitoring Devices:
a.
Monitored Photo Eyes and Wireless Edge Kits.
1)
LiftMaster LMRRU Reflective Photo Eyes.
2)
LiftMaster LMTBU Thru-Beam Photo Eyes.
3)
LiftMaster LMWEKITU Wireless Edge Kith with Transmitter and
Receiver.
4)
LiftMaster LMWETXU Wireless Edge Transceiver
b.
Wired Monitored Edges (all require use of LMWEKITU)
1)
LiftMaster S50 Small Profile Monitored Edge
2)
LiftMaster L50 Large Profile Monitored Edge
3)
LiftMaster WS4 Wrap-Around 4 foot (1219 mm) square monitored edge
4)
LiftMaster WS5 Wrap-Around 5 foot (1524 mm) square monitored edge
5)
LiftMaster WS6 Wrap-Around 6 foot (1829 mm) square monitored edge
6)
LiftMaster WR4 Wrap-Around 4 foot (1219 mm) square monitored edge
7)
LiftMaster WR5 Wrap-Around 5 foot (1524 mm) square monitored edge
8)
LiftMaster WR6 Wrap-Around 6 foot (1829 mm) square monitored edge
Accessories: Provide the optional accessories listed below.
a.
LiftMaster LOOPDETLM Plug-in Loop Detector
b.
LiftMaster KPW250 Wireless Commercial Keypad
c.
LiftMaster RGL24LY Red/Green Traffic Light
d.
LiftMaster 892LT 2-Button Security+ 2.0 Learning Remote Control.
e.
LiftMaster 894LT 4-Button Security+ 2.0 Learning Remote Control.
f.
LiftMaster 811LM 1-button Encrypted DIP Remote Control.
g.
LiftMaster 813LM 3-Button Encrypted DIP Remote Control.
h.
LiftMaster IPAC Internet Protocol Access Control Entry System.
i.
LiftMaster EL2000SS Stainless Steel Commercial and Gated Community
Telephone Entry System
j.
LiftMaster Star1000 Commercial Access Control Receiver
k.
LiftMaster PPWR Passport Receiver with Security+ 2.0 Technology
l.
LiftMaster PPV1 Passport 1-Button Remote
m.
LiftMaster PPK1 Passport 1-Button Mini Remote
n.
LiftMaster KPR2000 Single Access Remote Control Keypad and Proximity
Reader
LiftMaster LMRRU Monitored Retro-Reflective Photo Eye.
1.
LiftMaster LMRRU Monitored Retro Reflective Photo Eye: Photo eye assembly, with 6
foot (1829 mm) cable, photo eye bracket, photo eye hood, square reflector, reflector
02829-37
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
U.
hood, reflector bracket, mounting hardware.
Compliance:
a.
Meets UL 325 requirements for gates as secondary entrapment protection.
b.
Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.
Installation Design:
a.
Single-sided, does not require trenching.
b.
Alignment: LED indicator with visible feedback and adjustable photo eye
assembly.
Photo Eye Beam: Polarized beam technology sends and receives beam through 2
polarized filters to avoid interference from shiny objects.
Sensing Distance: 50 feet (15 m).
Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65
degrees C).
Power: LiftMaster 2-wire photo eye interface.
Operating Current: Greater than or equal to 40 mA.
Output Versions: Monitored 2-wire.
Response time: 35 milliseconds.
Wake-up Delay: 500 milliseconds.
Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18
gauge.
LiftMaster LMTBU Monitored Through Beam Photo Eye.
1.
LiftMaster LMTBU Monitored Through Beam Photo Eye: Photo eye emitter, photo eye
receiver each with 6 foot (1829 mm) cable, 2X photo eye bracket, 2X photo eye hood,
mounting hardware.
2.
Compliance:
a.
Meets UL 325 requirements for gates as secondary entrapment protection.
b.
Enclosure: NEMA 4X waterproof and corrosion-resistant enclosure.
3.
Installation Design:
a.
Dual-sided, if used in dual gate applications. Operator wireless communication
can be used to avoid trenching.
b.
Alignment: LED indicator with visible feedback and adjustable photo eye
assembly.
4.
Photo Eye Beam: Polarized beam technology sends and receives beam through 2
polarized filters to avoid interference from shiny objects.
5.
Sensing Distance: 90 feet (27 m).
6.
Operating Temperature Range: -40 degrees F (-40 degrees C) to 149 degrees F (65
degrees C).
7.
Power: LiftMaster 2-wire photo eye interface.
8.
Operating Current: Greater than or equal to 40 mA.
9.
Output Versions: Monitored 2-wire.
10.
Response time: 35 milliseconds.
11.
Wake-up Delay: 500 milliseconds.
12.
Connection: 6 foot (1829 mm) cable, fine stranded with crimp terminals wire size 18
gauge.
PART 3 EXECUTION
3.1
EXAMINATION AND PREPARATION
A.
Inspect and prepare substrates using the methods recommended by the manufacturer for
achieving best result for the substrates under project conditions.
B.
Do not proceed with installation until substrates have been prepared using the methods
recommended by the manufacturer and deviations from manufacturer's recommended
tolerances are corrected. Commencement of installation constitutes acceptance of
conditions.
02829-38
C.
3.2
INSTALLATION
A.
3.3
If preparation is the responsibility of another installer, notify Architect in writing of deviations
from manufacturer's recommended installation tolerances and conditions.
Install in accordance with manufacturer's instructions. Test for proper operation and adjust
until satisfactory results are obtained.
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
02829-39