Trusted and preferred by professionals since
1946 we are known for our commitment to
quality, performance and consistency.
Industries Served
•
•
•
•
Manufacturing / Fabrication
Hospitals & Health Care Facilities
Fireproofing Residential/Commercial
Retail / Commercial Facilities
• Food & Beverage
Processing
• Maintenance Oil & Gas
• Water & Wastewater
Facilities
Services Offered
• Project Inspection
• Coating Recommendation
• Failure Analysis
• Free Technical Service
• Job Site Training
• Specification Writing
Danny Janulek – Idaho, Nevada & Northern California (650) 622-6509
djanulek@kellymoore.com
Steve Sexton – Northern & Central California (925) 984-5036 ssexton@kellymoore.com
Greg Sutton – Texas, Oklahoma & Arkansas (918) 625-2538 gsutton@kellymoore.com
Contego Passive Fire
Barrier (PFB)
1.
(SFRM) Spray Applied Fire Resistive
Material
2.
(PFB) Passive Fire Barriers
3.
(PFP) Passive Fire Protection (UL1709)
Monokote® is a gypsum based cementitious
spray-applied fire resistive material for structural
steel framed buildings
The term cementitious as defined by ASTM or Underwriters Laboratories Inc. applies to all fireproofing that is wet mixed and
then pumped as a slurry. Cementitious does not refer to portland cement content.
There are two basic categories of Architectural
Fireproofing, Residential and Commercial
applications. These products usually consist of a
thin-film latex or solvent based material.
There are two basic types of industrial fireproofing—
cementitious and epoxy intumescent. These products are
usually designed to meet UL1709
 Cementitious fireproofing is a cement-based material
that provides fire protection through its inherent
insulative properties.
 Epoxy intumescent fireproofing has the appearance
and application characteristics of a protective coating.
Materials including structural steel, aluminum,
dimensional lumber, manufactured wood
products, trusses, drywall, spray polyurethane
foam insulation, HDPE wall panels, concrete,
plaster, solid core doors and more. The product
may also be used for conduit, decking and
cladding.


Intumescent Fireproofing Systems allow
designers to express the steel structure as an art
form in buildings where fire resistance ratings
are required.
Project planners now have flexibility to create
unique exposed steel designs where fire
resistance ratings are required, with
aesthetically pleasing, durable and cost
effective alternatives.










Decorative Thin Film Coating
1, 2 and 3 Hour Fire Ratings
0 V.O.C. /Non-Toxic
Excellent Durability
High Impact Strength
Provides A Clean Dust Free Environment
Easy Paint-Like Application
Suitable For Top coating with any KM Paint
Marketable to our Painting Contractors
Direct Manufacturer Support
 Tested to 9 ASTM International Standards:









ASTM D 1475 - Standard Test Method For Density of Paint, Varnish,
Lacquer, and Related Products.
ASTM D 2369 - Standard Test Method For Volatile Content of
Coatings.
ASTM D 3359 - Standard Methods for Measuring Adhesion by Tape
Test (Methods A and B)
ASTM D 3960 - Standard Practice for Determining Volatile Organic
Compound (VOC) Content of Paints and Related Coatings.
ASTM D 4017 - "Standard Test Method for Water in Paints and Paint
Materials by Karl Fischer Method.
ASTM E 84 - Standard Test Method for Surface Burning
Characteristics of Building Materials.
ASTM E 119 - Standard Test Methods for Fire Tests of Building
Construction and Materials.
ASTM E 283 - Standard Test Method for Determining Rate of Air
Leakage Through Exterior Windows, Curtain Walls, and Doors Under
Specified Pressure Differences Across the Specimen.
ASTM E 662 - Standard Guide for Measurement of Gases Present or
Generated During Fires.
TOTAL Firefilm 722 gallons
ONE HOUR PROTECTION
Total
Total
Linear Ft.
Square Ft.
W Shapes - Wide Flange Beams and Columns
Section*
W/D**
ft.2/ft
W12x22
W12x16
0.560
0.410
3.28
3.25
384.00
1178.00
L Shapes - Angles
Section*
L6x6x1/2
L5x3x1/4
L4x4x3/8
L4x4x1/4
L3x3x3/8
L3x3x1/4
W/D**
0.824
0.418
0.615
0.416
0.608
0.414
Total
Linear Ft.
ft.2/ft
1.98
1.32
1.32
1.32
0.98
0.98
510.00
92.00
61.00
66.00
142.00
526.00
1259.52
3828.50
Total
Square Ft.
1009.80
121.44
80.52
87.12
139.59
517.06
DFT
Mils
64
88
DFT
Mils
22
43
29
43
30
44
1 HOUR
RATINGS
Coverage
(Sq. Ft./Gal.)
Required
Gallons
15.00
83.97
10.91
350.95
Sub Tot
434.91
Coverage
Required
(Sq. Ft./Gal.) Gallons
43.64
22.33
33.10
22.33
32.00
21.82
23.14
5.44
2.43
3.90
4.36
23.70
497.89
Minimum
Coats
3
4
Minimum
Coats
1
2
2
2
2
2

Sample thickness required for 2 Hour application.
Beam Type
Albi-Clad
Contego
W10x49
HSS 8x8x.500
310 mils
334 mils
77 mils
42 mils
Winner!!
Sample thickness required for 2 Hour application:
Beam Type
FIREFILM
CONTEGO

W10x49
Not possible (Design X641)
HSS 8x8x.500
186 mils (Design X642)
77 mils
42 mils
Winner!
A/D Firefilm® III
Great Western Painting
Commercial & Industrial Painting. Serving the
U. S. A. Water Towers -Tanks - Hotels Chemical
plants - High Rises - Structural Steel
1 - 877-749-5554 pat@greatwesternpainting.com
Thank You