RF Pick, Pack & Ship
for XA COM
Including Release 2 Features/Functions
Jim Simunek, Sr. Business Consultant,
Cistech, Inc.
Jim.Simunek@cistech.net
Overview
• Use RF gun to stage COM orders for shipment
– No need to key items/quantities picked on ‘green
screen’
• Control File for ‘tailoring’
• Office functions to:
–
–
–
–
Assign Pick Lists to pickers
Status orders being picked
Clear RF flags (in case a signal gets dropped)
Ship non-container orders
Existing Features
• Handles both regular and stock pick lists
• Recognizes Discrete Allocations
• Will switch to kit component pick lists from
primary pick list if there are kit items on the
primary pick list
• Can containerize pick (Control File setting - all
orders or none)
• Handles consolidated pick lists
Release 2 Enhancements
• Re-structure RF Environment Control Maintenance into
groupings
• Employee Assignment to specific pick lists (Control File
setting)
• Allow F5 prompt from Enter Pick List at RF – Display
pick lists available for picking at RF (this will allow pick
list print too)
• Allow entry of item, turnaround, or UPC from RF
• When displaying pick list items, display them in pick list
order
• Item Substitution during picking (Control File setting)
• Serial number entry (Control File Setting)
List of Enhancements
• Allow entry of Carrier information from RF
(Control File setting)
• Allow packing list print prior to shipping, from RF
• Automatic shipment create for UPS, Fed Ex or
DHL without requiring containerization
• Allow F2 return from Location Rescan/Verify
R7 Only Enhancements
• Incorporate new R7 XA user exits needed to make
the product work less invasively with XA
• Incorporate the XA7 ability to provide insufficient
inventory messaging at the warehouse level
File Set-up
Control File
• Containerize shipments (must use XA screens to ship the
container)
• Interfaces to UPS, Fed Ex and DHL
• Use the feature to assign Pick Lists to Employees
• Guided Picking
– Un-Guided picking will ask for enter/scan of:
• Item Number
• UPC Number (User Exit in case UPC not stored in ‘Alternate Item
Number’ field of Item Master/Revision)
• Turnaround Number
– Guided Picking will display the next number to be picked on the
RF gun
Control File
• Separate Manager Approvals for either over pick
quantity or under pick quantity
• Item Re-scan verification
• Item Substitutions
• Default pick location to Item Balance Default
Location
• Block display on the RF gun of items waiting
inspection or under QC quarantine
• Warning or Error notification to the RF Gun when
inventory in a location will go negative
Control File
• Automatic print of Packing List at Pick Order Verification
• Ability to print Shipping Labels at Pick Order Verification
– Default Label has Ship name/address from CO and CO number,
PO number and label count (i.e. ‘1 of 3’)
– User Exit and API allow use of your own label
• Enter Carrier information from RF gun
–
–
–
–
Pro Number
Truck/Trailer number
Weight & Cubes
Separate setting in Employee Defaults
Control File
• Automatic document print at time of shipment
– Packing List
– Invoice
– Bill of Lading
• Ground Carrier defaults (UPS, Fed Ex & DHL)
– Special Charge code to be used for adding freight
– Shipping Label print
– Carrier information entry from RF Gun
Warehouse Defaults
• Manager Approval Code (for over/under pick quantities)
• Serial Number Entry (if item is flagged as Serial Number
Item)
–
–
–
–
Required
Not Required
Warning if not entered
No Serial Number entry
• Valid Staging Locations
– If Containerizing, Hold and Unpack locations
– If using Item Substitutions, Error Location
Employee Defaults
• Employee must be a valid Employee in the PM&C
Employee Master file
• Defaults
– Company Number
– Warehouse ID
– Ability to enter Carrier information from the RF gun
• Separate option for UPS, Fed Ex and DHL
• Setting for all ‘other’ carriers
Carrier Master (COM File)
Carrier ID . . . . . . . : UPS NDA
Name . . . . . . . . . . . UPS
Address line 1. . . . . .
2 ......
3 ......
Std. Carrier Code used to designate
Carrier as UPS, Fed Ex or DHL
City . . . . . . . . . . .
State . . . . . . . . . . .
Postal code . . . . . . . .
Country . . . . . . . . . .
Telephone number . . . . .
Fax number . . . . . . . .
Address format . . . . . .
1
Standard carrier code . . . UPS
Transport mode . . . . . . T
Service level . . . . . . .
Registration 1 . . . . . .
Registration 2 . . . . . .
F3=Exit F12=Return
Billable Sales Transport Terms
• When using the program to ship UPS, Fed Ex and/or DHL
orders, it determines if freight charges are to be added by
the Sales Transport Term code on the CO
• Separate (Cistech) Billable Sales Transport Terms file is a
sub-set of the COM Sales Transport Terms
– Separate Billable code files for UPS, Fed Ex and DHL
• If the CO is shipped via UPS, Fed Ex or DHL and the CO
has a Sales Transport Term that is billable to the customer,
freight charges will be brought from the Carriers file to the
shipment record
User Exits/API
AMVBSDFR
Activate Process Group Exits
Application . . . . : COM Customer Order Management
Position to group . . . .
DISPLAY
Active
Type options; press Enter.
16=Activate 17=Deactivate 71=User exits
New Group
in COM
Opt Group Description
ITM Item maintenance
MSC Miscellaneous
OFL EDI/OFFLINE ENTRY
PCK Pick activities
QTD Quote detail
QTH Quote header
RPK RF Picking Activities
SCD Special charge detail
SHP Shipping
SOD Standing order detail
SOH Standing order header
Status
Inactive
Inactive
Inactive
Active
Inactive
Inactive
Inactive
Inactive
Active
Inactive
Inactive
F3=Exit
F7=Backward F8=Forward F11=Job status
F12=Return
+
User Exits/API
• User Exits run in addition to the existing programs
• API’s run in place of the existing program
• Both allow for customization without modifying
the code
• Use of User Exits and API’s allow for easier
upgrade to future releases
User Exits/API
AMVB2DFR
Activate User Exits
DISPLAY
Application . . . . :
COM Customer Order Management
Active
Process Group . . . :
RPK RF Picking Activities
Inactive
Position to code . . . . .
Type options; press Enter.
16=Activate 17=Deactivate
Opt Code Description
1 PL/TrnAround Addt'l Edits
2 Post RF Pick List Create
3 RF Pack/Vrfy Addt'l Edits
4 Post RF Pack/Verify
5 Shipping Label Print API
6 Post Shipping Label Print
7 RF Unpack Addt'l Edits
8 Post RF Unpack
9 Crt Ofln Shpmt Adtl Edits
Type
User Exit
User Exit
User Exit
User Exit
API
User Exit
User Exit
User Exit
User Exit
Status
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
F3=Exit
F7=Backward F8=Forward F11=Job status
F12=Return
Program
RFBRPK1R
RFBRPK2R
RFBRPK3R
RFBRPK4R
RFBRPK5R
RFBRPK6R
RFBRPK7R
RFBRPK8R
RFBRPK9R
User Exits/API
AMVB2DFR
Activate User Exits
DISPLAY
Application . . . . :
COM Customer Order Management
Active
Process Group . . . :
RPK RF Picking Activities
Inactive
Position to code . . . . .
Type options; press Enter.
16=Activate 17=Deactivate
Opt Code Description
A Post Offline Shpmt Create
B Post Item Pick Completed
C Avail Inv Dsp Addtl Edits
D Item Pick Loc Addtl Edits
E Post Pick Qty Entry/Edit
F Itm Pck Cmplt Addtl Edits
G Get Item for a UPC#
H Get UPC# for an Item
I Pre Carrier Info Entry
J Post Shpmts Create-Multi
Type
User Exit
User Exit
User Exit
User Exit
User Exit
User Exit
API
API
User Exit
User Exit
Status
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
F3=Exit
F7=Backward F8=Forward F11=Job status
F12=Return
Program
RFBRPKAR
RFBRPKBR
RFBRPKCR
RFBRPKDR
RFBRPKER
RFBRPKFR
RFBRPKGR
RFBRPKHR
RFBRPKIR
RFBRPKJR +
Order Picking
Staging Screens
2/17/08 13:37:35
1. Pick/Verify
2. Ship Addr Labels
3. Serial# Maint.
9. RF Inv Trans
99. Signoff
Option:
• After Signing onto RF
gun, screen at left is
displayed
– Option 1 will go into the
picking process
– Option 2 allows for
additional labels to be
printed
– Option 3 allows for
maintenance to serial
numbers
– Option 9 shifts to Cistech’s
RF Inventory Transactions
Employee Number
2/17/08 13:48:45
Pick Processing
Badge: 1
James Worthington
Company: 01
Warehouse: 1
F3=Exit
• After Badge Number is
entered, screen at left is
displayed
• Defaults from Employee
Master (Cistech) file are
displayed and can be
overridden
Pick List
2/17/08 13:50:23
Pick Processing
Pick List:
-OrTurnaround:
F2=Return F3=Exit
F5=View Pick Lists
• Employee can enter the
Pick List Number
• If Employee presses F5
key, screen will change to a
list of Pick Lists
– If pick list has been assigned
to Employee it will be at the
top of the list
• If Pick List was printed
with Bar Code, turnaround
number can be scanned
Pick List Prompt
Pos to PL#
1=Select 6=Print
S PL# Cust
3965 Walmart
Ord 12485 St TX
3986 Walmart
Ord 12481 St TX
3990 Walmart
Ord 12496 St TX
4013 Walmart
Ord 12497 St TX
F2=Rtn RollUp/Dwn
• Sample screen when
pressing F5 – Pick List
Prompt
• Allows for ‘paperless
picking’
– Pick list must still be
created in COM but hard
copy does not need to be
printed
Pick Item Screens
• Guided Pick Screen: • Un-Guided Pick Screen:
Pick List 3965
1104
SPEAKERS
Staging Loc
2/17/08 14:50:24
Pick List 4020
Item
Reqd:
Picked:
Remain:
5.000
.000
5.000
Turnaround
Location FG01
UPC
Qty
.000
F2=Rtn F3=Ext F4=Adj
F5=Avl F6=Ver F7=Sub
F2=Rtn F3=Exit
F5=View PL Items
Un-guided Picking – Item Prompt
2/17/08 14:51:40
Pick List 4020
Enter "1" to Select
S Item / Picked
1108
.000
1000
.000
1105
.000
F2=Rtn
• If using un-guided picking,
the Employee can press the
F5 key (when prompted for
Item Number) to see a list of
items on the pick list
• Items will be displayed in the
same sequence as printed on
the pick list
• Key a ‘1’ next to the item to
be picked to go to the item
screen
Pick Item
Pick List 3965
1104
SPEAKERS
Staging Loc
Reqd:
Picked:
Remain:
5.000
.000
5.000
Location FG01
Qty
.000
F2=Rtn F3=Ext F4=Adj
F5=Avl F6=Ver F7=Sub
• F5 – Prompt in Location
field will display a list of
locations (non-staging) for
item
• Location can default to Item
Balance Location (Control
File)
• When entire quantity picked,
press F6 to verify item
• F4 allows changes to be
made to location/quantity
picked
Staging – Non-Container
2/17/08 13:59:36
Pick List 3965
1104
SPEAKERS
Staging Location
SHIP
F5=View Stg Info
• When first quantity for item
is picked, Staging location
must be entered
• Must be a valid stage
location (Cistech
Warehouse Default File)
• Different items can be
staged in different Staging
Locations
• RF PPS will create IW/RW
transactions in TRDATA to
move inventory from shelf
to stage locations
Staging – Container
2/17/08 13:59:36
Pick List 3965
1104
SPEAKERS
Staging Location
SHIP
Container ID
___
Container Number
______
F5=View Stg Info
• Container ID must be a valid
(COM) container
• Container number, if not
entered, will become the Pick
List number
• Item will have IW/RW
transactions that move goods
from shelf to hold location (as
designated in Warehouse
Default)
• When order is verified,
Container will be created in
COM and items transferred from
hold location to container
Order Verify
Pick List 3965
Enter "1" to Select
Sel Item
1104
Reqd:
5.000
Picked:
5.000
• When all items on Pick List
have been picked (either
partial or complete), screen
at left will display to allow
Employee to either:
– Change an item (’1’ in Select
field)
– Press F6 to verify the order
F3=Exit F6=Verify
• If ‘Pack List Print’ at order
verify (Control File) was set
to Yes, Pack List will be
printed
Carrier Information
Carrier Information
Pick List 3965
Carrier:
ROADWAY
ProBill:
1234134134
Truck:
ABC - 123
Trailer:
225465467346573657
Instr's:
PO Number must be on every box
F2=Return F4=Prompt
• If Control File and
Employee Default allow
for entry of Carrier
information from RF
gun, screen at left (and
on next slide will
display)
• Employee can enter any
information
• Can use F4 at Carrier to
see list of valid carriers
Carrier Info – Screen 2
Carrier Information
Pick List 3965
Ctns:
0
Weight:
.000
LB
5.000
Volume:
.000
CF
5.000
Pack By:
James Worthington
F2=Return
• System calculated weight
& volumn will be
displayed; actuals can be
entered
• Pack by defaults to
Employee name
Serial Number
1000
PC, 166 MHZ, D
Picked:
5.000
S# Count:
0
Pos
Warranty Dt: 21708
S#:
Enter "4" to Remove
(No Serial #s Exist)
F2=Rtn F6=Add Range
• If item is set up for Serial
number and Serial number
entry is enabled in the
Control File, screen to the
left will be displayed
• Serial numbers can be
entered/scanned one at a
time
– Will be checked for duplicate
serial numbers and error
issued
• Press F6 to generate Serial
Numbers
Serial Number Generation
1000
PC, 166 MHZ, D
Picked:
5.000
S# Count:
0
Starting Serial#:
Number to Generate:
5
Increment:
1
Warranty Dt: 21708
F2=Rtn
• Works exactly like XA
• Must use Numeric S/N for
generation
• Does not check for
duplicate serial numbers
• Will be returned to previous
screen after generation
where you can select a S/N
to be deleted
• Cannot have more serial
numbers than the quantity
picked
Shipping Labels
2/17/08 14:22:09
Ship Addr Label
Pick List 4019
Carrier Roadway
# Labels to Print
1
F2=Return
• If Labels were requested
in Control File, screen to
left will be displayed
• Employee will enter
number of labels to be
printed
• Ship To name/address
from CO will be printed
• CO #, PO # and label
count will be printed
Sample Shipping Label
Ship To:
Automotive Parts Customer
23456 Peachtree Road
Atlanta GA 30328
United States
CO 12500 PO Demo
00001 of 00003
• Sample label (above) is standard with RF PPS
• Can use User Exit to create Additional Labels of your own
design
• Can user API to create all labels
Sample Pack List
Packing List - Pro Forma
Page 1
2/17/08 14:16:02
Shipped From:
Company . . : 1 ABC, COMPANY
Warehouse . : 1 HI-TECH COMPANY - MAIN WHSE
Ship to:
Walmart
8725 West Avenue
Houston TX 75225
United States
----------------------------------------------------------------------------Carrier/Pro Number
Truck/trailer number
Gross Weight U/M
_________________________ _________________________ ___________
_________________________ _________________________
----------------------------------------------------------------------------Order information:
CO 12485 11/14/07 Walmart
P.O. information:
Transport terms . . . . . : Prepay & Add
Shipping instructions . . : PO Number must be on every box
Pack Special
Item number
Item description
Quantity U/M
1104
SPEAKERS
5.000 EA
LB
Item Substitutions
• If the Employee picking the order is allowed to substitute one item
with another, substitutions must be turned on in the Control File
– If Substitution is not enabled in the Control file, F7 key will not display on the
RF gun
• Substitute Item Number must be set up in the XA Item Substitution
file
• When the employee presses the F7 key to substitute the item, the
following will occur:
–
–
–
–
–
Items already staged will be moved to ‘hold’ location
Original Pick List will be deleted
CO will be updated with substitute item (using Offline File Load programs)
New Pick List will be created with the substitute item
Items previously staged will be staged to the new pick list
Office Functions
Office Functions
• Use Office functions to:
–
–
–
–
Assign Pick Lists to Employees
See orders currently being picked (un-verified)
See orders staged but not shipped (verified)
Clear RF flags from item
• Necessary if RF gun loses signal, RF lock will remain on item
preventing access to the item
– Ship staged orders (non-container)
Office Functions
• In Release 6, all Office Functions are in Green
Screen
• In Release 7, Office Functions can be performed in
either Green Screen or PowerLink
Assign Employees to Pick Lists
• Pick List can be assigned to a single Employee or multiple
– Cannot have multiple Employees working on the same item
• Can assign a priority
– Pick lists will display in priority sequence when F5 key is used on
the RF gun
– If no priority assigned, pick lists will display in Pick List number
sequence
– Employee can select any pick list, even if priority assigned
• F17 – Subset feature during assignment to limit number of
pick lists displayed
• Use F7 key to toggle between pick list number sequence
and Employee Number sequence
– Must use Employee Number to assign priority code
Assignment Screen
SIMUNEKJA1
RF Pick List Badge Assignments
2/17/08
SFCTL01
By Pick List
15:01:04
Company: 01 ABC, COMPANY
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Position to Pick List:
Type Selection, Press Enter. 1=Assign 4=Remove Assignment 5=Display Items
6=Print Pick List
Opt Pri
Pick# Badge Employee
Customer
Order #Itms Mfg Date Use
3955 20 SANDRA MIERS Wal-Mart Lauren
12482 3 11/09/07
2
3956 10 JEFF EATON
Walmart
12477 1 11/09/07
3956 20 SANDRA MIERS
3962 20 SANDRA MIERS Walmart
12483 2 11/13/07
3965
Walmart
12485 1 11/14/07
3
3968 10 JEFF EATON
Walmart
12486 1 11/14/07
3968 20 SANDRA MIERS
3978 20 SANDRA MIERS Walmart
12491 1 11/16/07
1
3979 10 JEFF EATON
Walmart
12492 1 11/16/07
3979 20 SANDRA MIERS
4
3982 10 JEFF EATON
Walmart
12495 1 11/28/07
3982 20 SANDRA MIERS
More...
F3=Exit F5=Refresh F7=ByBadge F11=Fold/Unfold F12=Previous F17=Subset
Assignment List
Assign Picker
Assign Picker
Badge:
Badge:
Badge:
Badge:
Badge:
F4=Prompt F12=Previous
• When you select a Pick
List (by keying a ‘1’ next
to the pick list number),
the window to the left will
appear
• Enter a single badge
number or multiple
• Can have an unlimited
number of employees
assigned to the same pick
list
Assignment Subsets
SIMUNEKJA1
RF320D2
RF Pick List Badge Assignments
2/17/08
Subset Pick Lists
15:09:31
Unassigned PLs Only?:
Carrier:
Assigned PLs Only?:
Ship-To Country/State:
Ranges:
Customer:
Mfg Ship Date:
Request Date:
Badge:
Pick List:
Order:
Item:
F3=Exit F4=Prompt F12=Previous
Pick Status Review
• Use F7 key to toggle between Verified and UnVerified pick lists
• Picked quantity will be highlighted if Picked
quantity is different from Required quantity
• Status will show code if item is at RF gun, has
errors, etc.
• Use options to see items, locations, quantities
picked, etc.
RF Pick Status Review - Unverified
SIMUNEKJA1
SFCTL01
RF Pick Status Review
Unverified
Company: 01 ABC, COMPANY
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Position to Pick List:
Type Selection, Press Enter. 1=Select 4=Remove from RF
Opt Pick# Customer Customer Name
Order
Required
4020 60000001 Automotive Parts C 12501
65.000
Picked Status
.000
Bottom
F3=Exit F5=Refresh F7=Unverified/Verified F11=Fold/Unfold F12=Previous
2/17/08
15:18:44
RF Pick Status Review - Verified
SIMUNEKJA1
SFCTL01
RF Pick Status Review
Verified
Company: 01 ABC, COMPANY
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Position to Pick List:
Type Selection, Press Enter. 1=Select 4=Remove from RF
Opt Pick# Customer Customer Name
Order
Required
3965
701 Walmart
12485
5.000
4019 60000001 Automotive Parts C 12500
65.000
Picked Status
5.000
65.000
Bottom
F3=Exit F5=Refresh F7=Unverified/Verified F11=Fold/Unfold F12=Previous
2/17/08
15:18:44
Ship Orders
• If Containerization is not used, use Office Screens
to ship Verified Orders
• Can add one Special Charge per shipment
• Can enter Carrier information for the shipment
• Can select a single order for shipment or multiple
orders
• ‘F17 – Subset’ key to limit the number of staged
orders to be displayed
Create Shipments
SIMUNEKJA1
SFCTL01
Create Shipments for RF Pick Lists
2/17/08
15:33:29
Company: 01 ABC, COMPANY
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Position to Pick List:
Type Selection, Press Enter. 1=Select 6=Print Pro Forma Packing List
Opt Pick# Customer Customer Name
Order
Required
3965
701 Walmart
12485
5.000
4019 60000001 Automotive Parts C 12500
65.000
Picked Frt Err
5.000
65.000
Bottom
F3=Exit F5=Refresh F9=Create Shipments F11=Fold/Unfold F12=Previous
F13=Select/Unselect All F17=Subset
Create Shipment – Item List
SIMUNEKJA1
SFCTL02
Create Shipments for RF Pick Lists
15:35:13
2/17/08
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE Mfg Scheduled Ship Date: 11/14/07
Pick List: 3965
Verified By: James Worthington
Customer:
701 Walmart
Type Selection, Press Enter. E=Shp Errs L=Loc Dtl C=Kit Cmpnts S=Serial #s
Opt Item
1104
Item Description
SPEAKERS
Required
5.000
Picked Err
5.000
Bottom
F3=Exit F7=Carrier F8=Special Charge F9=Create Shipment F12=Previous
Carrier Detail – Create Shipment
SIMUNEKJA1
Create Shipments for RF Pick Lists
RF310D2
Carrier Details
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Pick List: 3965
Customer:
701 Walmart
2/17/08
15:35:34
Carrier:
Pro Bill Number:
ROADWAY
1234134134
UPS
Truck Number:
Trailer Number:
ABC - 123
225465467346573657
Lading Quantity:
0
Weight Override:
Volume Override:
.000
.000
0
5.000 LB
5.000 CF
Packed By:
James Worthington
Shipping Instructions:
PO Number must be on every box
F3=Exit F4=Prompt F12=Previous
Special Charges – Create Shipment
SIMUNEKJA1
RF310D3
Create Shipments for RF Pick Lists
Special Charge Information
Warehouse: 1 HI-TECH COMPANY - MAIN WHSE
Pick List: 3965
Customer:
701 Walmart
Special Charge ID: FRT
Amount:
25.00
F3=Exit F4=Prompt F12=Previous
2/17/08
15:36:00
Create Shipment Actions
• When the ‘F9 – Create Shipment’ key is pressed, the
following will occur:
– A shipment record will be created for the CO
– SA transactions will be created in IM for the items shipped (using
the stage location and quantity)
– Depending on Control File settings, the following may print:
• Packing List
• Bill of Lading
• Invoice
• A message showing shipment number and pick list number
will be displayed on the screen
PowerLink Ship
UPS, Fed Ex & DHL Orders
• If Automated Shipping for UPS, Fed Ex and/or DHL
orders is activated:
– Pick List print will send information to the appropriate ground
carrier provided PC
– When Order is scanned and shipping labels created by ground
carrier PC, file is updated with Freight Charges and Tracking
Numbers
– Scheduled Job will ship CO’s
• Tracking Numbers will be added
– 1st Number will be placed in ‘Pro Bill Number’ field
– Any others will be added as Shipment Comments
• If Sales Transport Terms specifies that the customer will be charged for
freight, Freight Charges will be added to shipment
Summary
• RF Pick/Pack/Ship is available as an RF Standalone product or can be sold as part of Cistech’s
‘RF Suite’ which includes:
– IM transactions, REP transactions and IM Inquiry
– Physical Inventory (interfaces with MM)
– Pick/Pack/Ship
• Can go completely ‘paperless’ by using Employee
assignments to pick lists
• Installed and implemented in 16 companies to date
Summary
• Office functions brought into Browser/Power Link is
currently under development
• R2 (PPS) features greatly increased system functions
–
–
–
–
–
Employee Assignments to pick list
Entry by Item Number, UPC or Turnaround
Serial Number
Item Substitutions
UPS, Fed Ex and DHL no longer requires containerization be
activated
– Pack List print when order is verified
Thank You