View News Article - Dekker Vacuum Technologies

advertisement
NEWS RELEASE
Contact:
Pam Knight, Sales/Marketing
Dekker Vacuum Technologies, Inc.
pknight@dekkervacuum.com
(219) 861-0661
DEKKER Vacuum Technologies Returns to
Topsides, Platforms & Hulls Conference & Exhibition
Michigan City, IN (January 15, 2016) – DEKKER Vacuum Technologies, a leader in
compressor and vacuum pump solutions for the oil, gas and chemical industries, is “on
board” with offshore oil production, exhibiting at Booth # 916 of the sixth annual
Topsides, Platforms & Hulls Conference & Exhibition, to be held in Galveston, Texas,
on February 9-11, 2016.
Topsides, Platforms & Hulls is the offshore oil and gas industry’s only event dedicated
to topsides, platforms and hulls for both deep and shallow water. “Topsides” is the
upper half of an offshore oil platform (above the sea level) on which the production
equipment is installed.
DEKKER offers outstanding solutions for maximum ROI through numerous performance
options at different speeds.
Performance for compression applications range from 250 CFM to 5,000 CFM (up to 80
Psi) for:




Vapor Recovery Units (VRU)
Flare gas recovery
Waste gas compression
Gas boosters
DEKKER offers performance options for vacuum applications from 5 CFM to 39,000
CFM (down to 25 Torr). Applications include:


Vacuum distillation units (VDUs)
Vacuum reactors



Vacuum evaporation
Vacuum drying
Vacuum stripping
DEKKER pumps and compressors meet or exceed API 681(liquid ring vacuum pumps
and compressors for petroleum, chemical and gas industry services), EPA and Kyoto
Protocol Regulations.
Products and services from engineering firms, contractors, suppliers and service
providers such as DEKKER are showcased at Topsides. A high-level technical program
covers the design, engineering and construction of topsides structures, platforms and
hulls, as well as business challenges and future trends in the industry.
DEKKER Part of a Vital Industry
Scot Desiderio, DEKKER oil and gas industry market specialist, and Jay Dressander,
Director of Sales at DEKKER, will host the DEKKER booth.
Desiderio is a sales executive with more than 30 years of experience in the design,
operation and sizing of rough, medium and high vacuum pumps and low-pressure
compression systems, with a current focus on the oil and gas/chemical marketplace.
Dressander is a sales and marketing executive with more than 18 years of experience
in project management, business-to-business sales and marketing and brand
development, with a focus on air handling and rotating equipment.
Desiderio noted that federal offshore oil production in the Gulf of Mexico represents
nearly one-fifth of total U.S. crude oil production. He said, “While the oil industry is
currently in a downturn, offshore production remains a foundation of the U.S. economy.
DEKKER compressors, pumps and systems are built for durability and value, with their
integral importance to the industry in mind.”
DEKKER products are among those that draw significant attention at Topsides.
According to the post-show demographic report of the 2015 event,
“Motors/Engines/Pumps/Compressors/Turbines/Generators” was cited as the fourth
highest “Area of Interest” among attendees, at 22.6 percent.
The 2015 conference was attended by a record number of 2,227 from 33 states and 25
countries. Dressander said, “Networking with the technical experts and decision makers
in the industry has definitely benefitted the DEKKER brand. We want industry
professionals to recognize that they too will benefit, from our unique combination of
experience, expertise and innovation.”
Dressander added, “DEKKER complements its product line with custom solutions. Our
engineers are compression and vacuum specialists who create solutions developed
specifically for the parameters of the application. Offering some of the industry’s best
advantages including the longest warranties in the market, we are especially wellpositioned to serve the topsides industry.”
For more information on Topsides Conference & Exhibition, please go to
http://www.topsidesevent.com.
For more information on DEKKER Oil and Gas Solutions, visit
http://www.dekkervacuum.com/pdfs/resources/DKR_14_1048_Oil_Gas_industry_web_v
f.pdf
Established in 1998, DEKKER Vacuum Technologies manufactures vacuum pumps and
systems for markets such as plastics, packaging, pharmaceuticals, laboratories, metal
processing, food processing, chemical, power generation, aerospace and many others.
DEKKER is a privately held, ISO 9001 certified company with more than 50 employees,
operating in a 45,000 square foot manufacturing, distribution and warehouse facility in
Michigan City, Indiana.
###
DEKKER Vacuum Technologies is either a registered trademark or trademark of
DEKKER Vacuum Technologies in the United States and/or other countries.
The names of actual companies and products mentioned herein may be the trademarks
of their respective owners.
For more information, press only:
Pamela Knight
Sales Assistant / Business Development
DEKKER Vacuum Technologies, Inc.
Tel: 219-861-0661 X167
Fax: 219-861-0662
pknight@dekkervacuum.com
www.dekkervacuum.com
For more information on DEKKER Vacuum Technologies: www.dekkervacuum.com.
Download