Probably The Most Advanced Presence Sensors In The World. Ultra Fine Motion Fine Motion High Frequency H.F.Corridor Smoke / Fire SALIENT FEATURES • Automatic Time delay Adjustment • Automatic and Manual Lux Setting feature • Field bus & Networking enabled via a potential free contact • Square Detection Zone • Mechanical reach Adjustment • Infrared Remote Control Available • Sensitive to a Very Small Motion • KNX and DALI Compatible 1 CO2 Have you Faced This Situation Before ……. 2 Occupancy & Presence Sensors For Lighting Control Professionals . Suitable connection options for different situations COM1 COM1AP Switching light COM2 Switching light & HVAC (heating/ventilation/air-conditioning) DIM Controlling light Modern bus systems (DALI, KNX) Wireless system Modular system Sensor modules • IR Quattro HD • IR Quattro IR Quattro HD COM1 • HF 360 • Dual HF Interfaces COM1 COM2 COM1AP DIM 4 What is the difference between a presence detector and a motion detector? The main difference between presence detectors and motion detectors lies in their • Detection properties • Areas of use • Possible settings and connections 5 Motion detectors Motion detectors detect walking movements within the set detection zone. Basic principle: Preset light value below threshold + movement registered No movement registered + set stay-ON time expired = Light ON = Light OFF Ideal areas of use: outdoor areas and rooms with a high level of movement 6 Presence detectors Presence detectors respond to the slightest movements using extremely high-resolution, precision sensor technology. Basic principle: Presence + light level is below a certain threshold No presence detected + set stay-ON time expired or Adequate ambient brightness (despite presence) = Light ON = Light OFF = Light OFF Ideal areas of use: indoor areas, especially for seated activities (offices in which people work at desks, classrooms etc.) and other special areas, such as sports halls, changing rooms, corridors or storage areas. 7 Motion Detectors Presence Detectors Detection Walking movements Even the slightest movement, also seated activities Application Indoors and outdoors Indoors Indoors: garages, corridors, storerooms Offices, classrooms, conference rooms etc. Outdoors: driveways, entrances, car parks, carports, fronts of buildings High rooms: warehouses, sports halls etc. Additional control of heating, ventilation, air-conditioning or constant lighting control Motion detectors provide convenience, safety and security Presence detectors provide max. energy efficiency and convenience Connection Light capability Switched relay output Additional loads Light Heating, ventilation, air-conditioning (HVAC) 1-10 V dimming interface DALI, KNX Light 'ON' Movement after ambient light has fallen below threshold criterion Light channel: movement/presence when ambient light is below a set threshold HVAC channel: movement/presence Light 'OFF' Load/artificial light remains ON as long as movement is detected, criterion/light measurement light measurement remains deactivated during this time. Light 'OFF' if ambient light is sufficient despite detection of presence/movement Light measurement remains activated HVAC channel and light OFF, when stay-ON time has expired after the last movement Period light stays 'ON' for starts after last detected movement, load/artificial light then switches off Other More setting capabilities for matching sensor to control task Considerably more precise detection Different options depending on the type of room 8 Presence must be detected precisely and reliably even when people move only minimally during their seated activities. 9 Extremely high-resolution sensor systems detect the slightest movements. Steinel Presence Control PRO IR QUATTRO HD Good presence detector with 3 pyro sensors 1300 switching zones 4800 switching zones 10 Presence range at a mounting height of 2.8 m Presence detectors must cover the entire room without overlapping and without gaps. 11 Advantages of a mechanically scalable square detection zone Ideal for Open Plan Office Areas • Zones can be clearly planned • Detection without overlapping and without gaps • Detection reliably planned for every point in the room • No detection in passageways • Presence zone is the last to be limited 12 Intelligent functions and settings for adapting to individual needs Time setting for light • Pulse mode • Actuation of a staircase lighting time switch • 2 seconds ON, 8 seconds OFF • IQ mode • Self-learning stay-ON time • Optimally adapted to the room and use Switch-on delay for HVAC with Potential Free Output • Room surveillance • HVAC switching contact is only switched when the room is actually being used • Actuator is not tripped by someone briefly looking into the room 13 Special function: basic brightness and constant-lighting control • Basic brightness • 10% dimming when brightness drops below threshold and movement is not detected • For 30 seconds – 30 minutes after expiry of the last detected movement • Or when brightness value remains permanently below threshold • Constant lighting control • Constant level of brightness within a room • Artificial light is added proportionally to the measured daylight • Amount of added artificial light depends on the incident daylight Manual override via push-button, switch or remote control • Manual intervention must be possible during presentations, video shows • External button/switch connected via separate "S" terminal Additional ON – ON/OFF function with manual override • ON only allows the light to be switched ON manually, but not OFF • ON/OFF allows the light to be switched ON and OFF manually 14 Semi-automatic and all-automatic • Semi-automatic (the light is switched off by the sensor) • Manual ON, automatic OFF • Via external button or switch • Manual OFF possible at any time • All-automatic (the light is controlled entirely by the sensor) • Automatic ON, automatic OFF • Manual ON and OFF override possible at any time Normal mode/Test mode • Normal mode • Presence detector operates with the values set on the potentiometers, DIP switches and the remote control • Test mode • Test correct operation, as well as setting and pacing out the detection zone • ON for 8 seconds when presence is detected • Test mode can also be activated via flashing blue LED without switched load when presence is detected 15 Pammvi Group Of Companies C-501, Remi Bizcourt, 9, Shah Ind Estate, V.D Road, Andheri (w), Mum - 53. Board: 022-26731904 / 26731052 Ext # 35 Email: info@pammvi.com Presence Sensor Web: http://www.occupancysensor-motionsensorlights.com Sensor Website - http://www.pir-motion-sensor.com/ 3/23/2016