DRIVING DIRECTIONS to Mexico
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Take I-10W to Buckeye
Exit State Route 85 South and continue to Gila Bend/I-8 San Diego
After reaching Gila bend, continue until you reach McDonalds. Turn right
just before McDonalds at the sign for Mexico/SR 85 South.
Take SR 85 South to Ajo (39 miles)
Continue on SR 85 South to Why, AZ (10 miles)
Continue on SR 85 South to Lukeville, AZ (27 miles)
Lukeville is the border between USA and Mexico. Once you cross the
boder, you will be in Sonoyta, Mexico. At this time, distances
change from miles to kilometers.
Continue on the main road for approximately 1.8miles. You will arrive at a
2-way intersection with a stop sign. At this time, you will see
a monument and signs for PTO Penasco and Santa Ana to the left. Make a
left at the stop sign and then bear right, follow the signs to
PTO Penasco.
Stay to the right towards Puerto Penasco/Caborca at the Y on the road.
There is a traffic light soon after you bear right.
Continue straight through this traffic light to Mexico Highway
8.
Once you have gone through Sonoyta, continue on Highway 8 from
Sonoyta to Puerto Penasco (approx. 55 miles). Along the way, there is a
sign that says El PTO Penasco. DO NOT turn at this sign. It is in the
middle of the desert! Continue on Highway 8 until you see the sign for the
Caborca/ Mayan Palace round about turn off, this will be at the 90KM
marker. (this is before the actual town of Rocky Point)
Proceed to the 22KM marker and make a right at the two arches, continue
on approx. 4 miles guiding right until you come to the sand dunes. Make a
left, continue on approx. 1 mile, pass the two large condominium
complexes (on your right) make a right turn just after, you will see our
guard shack on your right side make a left on the road and continue down
approx. 1 mile and you will see our homes on the right hand side.
“seayouatthebeach” is painted on the walls. M10 – L15 is the house #’s.
This will take you to homes 1-4. Homes 5 and 6 are located just before
the 4 homes and their # is M10- L12.