Chapter 5 - Cloudfront.net

5

Cell Membranes and

Signaling

Chapter 5 Cell Membranes and Signaling

Key Concepts

• 5.1 Biological Membranes Have a

Common Structure and Are Fluid

• 5.2 Some Substances Can Cross the

Membrane by Diffusion

• 5.3 Some Substances Require Energy to

Cross the Membrane

Chapter 5 Cell Membranes and Signaling

• 5.4 Large Molecules Cross the

Membrane via Vesicles

• 5.5 The Membrane Plays a Key Role in a

Cell’s Response to Environmental

Signals

• 5.6 Signal Transduction Allows the Cell to Respond to Its Environment

Chapter 5 Opening Question

What role does the cell membrane play in the body’s response to caffeine?

Concept 5.1 Biological Membranes Have a Common Structure and Are Fluid

A membrane’s structure and functions are determined by its constituents: lipids, proteins, and carbohydrates.

The general structure of membranes is known as the fluid mosaic model .

Phospholipids form a bilayer which is like a “lake” in which a variety of proteins

“float.”

Figure 5.1 Membrane Molecular Structure


Lipids form the hydrophobic core of the membrane.

Most lipid molecules are phospholipids with two regions:

• Hydrophilic regions —electrically charged

“heads” that associate with water molecules

• Hydrophobic regions —nonpolar fatty acid

“tails” that do not dissolve in water


A bilayer is formed when the fatty acid “tails” associate with each other and the polar

“heads” face the aqueous environment.

Bilayer organization helps membranes fuse during vesicle formation and phagocytosis.


Membranes may differ in lipid composition as there are many types of phospholipids.

Phospholipids may differ in:

• Fatty acid chain length

• Degree of saturation

• Kinds of polar groups present


Two important factors in membrane fluidity:

• Lipid composition—types of fatty acids can increase or decrease fluidity

• Temperature—membrane fluidity decreases in colder conditions


Biological membranes contain proteins, with varying ratios of phospholipids.

• Peripheral membrane proteins lack hydrophobic groups and are not embedded in the bilayer.

• Integral membrane proteins are partly embedded in the phospholipid bilayer.


Anchored membrane proteins have lipid components that anchor them in the bilayer.

Proteins are asymmetrically distributed on the inner and outer membrane surfaces.

A transmembrane protein extends through the bilayer on both sides, and may have different functions in its external and transmembrane domains .


Some membrane proteins can move within the phosopholipid bilayer, while others are restricted.

Proteins inside the cell can restrict movement of membrane proteins, as can attachments to the cytoskeleton.

Figure 5.2 Rapid Diffusion of Membrane Proteins


Plasma membrane carbohydrates are located on the outer membrane and can serve as recognition sites.

• Glycolipid—a carbohydrate bonded to a lipid

• Glycoprotein—a carbohydrate bonded to a protein


Membranes are constantly changing by forming, transforming into other types, fusing, and breaking down.

Though membranes appear similar, there are major chemical differences among the membranes of even a single cell.

Concept 5.2 Some Substances Can Cross the Membrane by

Diffusion

Biological membranes allow some substances, and not others, to pass.

This is known as selective permeability.

Two processes of transport:

• Passive transport does not require metabolic energy.

• Active transport requires input of metabolic energy.


Diffusion

Passive transport of a substance can occur through two types of diffusion:

• Simple diffusion through the phospholipid bilayer

• Facilitated diffusion through channel proteins or aided by carrier proteins


Diffusion

Diffusion is the process of random movement toward equilibrium .

Speed of diffusion depends on three factors:

• Diameter of the molecules —smaller molecules diffuse faster

• Temperature of the solution —higher temperatures lead to faster diffusion


Diffusion

• The concentration gradient in the system —the greater the concentration gradient in a system, the faster a substance will diffuse

A higher concentration inside the cell causes the solute to diffuse out, and a higher concentration outside causes the solute to diffuse in, for many molecules.


Diffusion

Simple diffusion takes place through the phospholipid bilayer.

A molecule that is hydrophobic and soluble in lipids can pass through the membrane.

Polar molecules do not pass through — they are not soluble in the hydrophilic interior and form bonds instead in the aqueous environment near the membrane.


Diffusion

Osmosis is the diffusion of water across membranes.

It depends on the concentration of solute molecules on either side of the membrane.

Water passes through special membrane channels.


Diffusion

When comparing two solutions separated by a membrane:

• A hypertonic solution has a higher solute concentration.

• Isotonic solutions have equal solute concentrations.

• A hypotonic solution has a lower solute concentration.

Figure 5.3A Osmosis Can Modify the Shapes of Cells

Figure 5.3B Osmosis Can Modify the Shapes of Cells

Figure 5.3C Osmosis Can Modify the Shapes of Cells


Diffusion

The concentration of solutes in the environment determines the direction of osmosis in all animal cells.

In other organisms, cell walls limit the volume that can be taken up.

Turgor pressure is the internal pressure against the cell wall —as it builds up, it prevents more water from entering.


Diffusion

Diffusion may be aided by channel proteins.

Channel proteins are integral membrane proteins that form channels across the membrane.

Substances can also bind to carrier proteins to speed up diffusion.

Both are forms of facilitated diffusion .


Diffusion

Ion channels are a type of channel protein —most are gated, and can be opened or closed to ion passage.

A gated channel opens when a stimulus causes the channel to change shape.

The stimulus may be a ligand , a chemical signal.


Diffusion

A ligand-gated channel responds to its ligand.

A voltage-gated channel opens or closes in response to a change in the voltage across the membrane.

Figure 5.4 A Ligand-Gated Channel Protein Opens in Response to a Stimulus


Diffusion

Water crosses membranes at a faster rate than simple diffusion.

It may “hitchhike” with ions such as Na + as they pass through channels.

Aquaporins are specific channels that allow large amounts of water to move along its concentration gradient.

Figure 5.5 Aquaporins Increase Membrane Permeability to Water (Part 1)

Figure 5.5 Aquaporins Increase Membrane Permeability to Water (Part 2)


Diffusion

Carrier proteins in the membrane facilitate diffusion by binding substances.

Glucose transporters are carrier proteins in mammalian cells.

Glucose molecules bind to the carrier protein and cause the protein to change shape —it releases glucose on the other side of the membrane.

Figure 5.6 A Carrier Protein Facilitates Diffusion (Part 1)

Figure 5.6 A Carrier Protein Facilitates Diffusion (Part 2)


Diffusion

Transport by carrier proteins differs from simple diffusion, though both are driven by the concentration gradient.

The facilitated diffusion system can become saturated —when all of the carrier molecules are bound, the rate of diffusion reaches its maximum.

Concept 5.3 Some Substances Require Energy to Cross the

Membrane

Active transport requires the input of energy to move substances against their concentration gradients .

Active transport is used to overcome concentration imbalances that are maintained by proteins in the membrane.

Table 5.1 Membrane Transport Mechanisms


Membrane

The energy source for active transport is often ATP.

Active transport is directional and moves a substance against its concentration gradient.

A substance moves in the direction of the cell’s needs, usually by means of a specific carrier protein.


Membrane

Two types of active transport:

• Primary active transport involves hydrolysis of ATP for energy.

• Secondary active transport uses the energy from an ion concentration gradient, or an electrical gradient.


Membrane

The sodium –potassium ( Na + –K + ) pump is an integral membrane protein that pumps Na + out of a cell and K + in.

One molecule of ATP moves two K + and three Na + ions.

Figure 5.7 Primary Active Transport: The Sodium

–Potassium Pump


Membrane

Secondary active transport uses energy that is “regained,” by letting ions move across the membrane with their concentration gradients.

Secondary active transport may begin with passive diffusion of a few ions, or may involve a carrier protein that transports both a substance and ions.

Concept 5.4 Large Molecules Cross the Membrane via Vesicles

Macromolecules are too large or too charged to pass through biological membranes and instead pass through vesicles.

To take up or to secrete macromolecules, cells must use endocytosis or exocytosis .

Figure 5.8 Endocytosis and Exocytosis (Part 1)

Figure 5.8 Endocytosis and Exocytosis (Part 2)


Three types of endocytosis brings molecules into the cell: phagocytosis, pinocytosis, and receptor –mediated endocytosis.

In all three, the membrane invaginates , or folds around the molecules and forms a vesicle.

The vesicle then separates from the membrane.


In phagocytosis (“cellular eating”), part of the membrane engulfs a large particle or cell.

A food vacuole (phagosome) forms and usually fuses with a lysosome, where contents are digested.


In pinocytosis (“cellular drinking”), vesicles also form.

The vesicles are smaller and bring in fluids and dissolved substances, as in the endothelium near blood vessels.


Receptor –mediated endocytosis depends on receptors to bind to specific molecules (their ligands ).

The receptors are integral membrane proteins located in regions called coated pits .

The cytoplasmic surface is coated by another protein (often clathrin ).


When receptors bind to their ligands, the coated pit invaginates and forms a coated vesicle.

The clathrin stabilizes the vesicle as it carries the macromolecules into the cytoplasm.

Once inside, the vesicle loses its clathrin coat and the substance is digested.

Figure 5.9 Receptor-Mediated Endocytosis (Part 1)

Figure 5.9 Receptor-Mediated Endocytosis (Part 2)


Exocytosis moves materials out of the cell in vesicles.

The vesicle membrane fuses with the plasma membrane and the contents are released into the cellular environment.

Exocytosis is important in the secretion of substances made in the cell.

Concept 5.5 The Membrane Plays a Key Role in a Cell’s

Response to Environmental Signals

Cells can respond to many signals if they have a specific receptor for that signal.

A signal transduction pathway is a sequence of molecular events and chemical reactions that lead to a cellular response, following the receptor’s activation by a signal.



Cells are exposed to many signals and may have different responses:

• Autocrine signals affect the same cells that release them.

• Paracrine signals diffuse to and affect nearby cells.

• Hormones travel to distant cells.

Figure 5.10 Chemical Signaling Concepts



Only cells with the necessary receptors can respond to a signal —the target cell must be able to sense it and respond to it.

A signal transduction pathway involves a signal, a receptor, and a response.

Figure 5.11 Signal Transduction Concepts



A common mechanism of signal transduction is allosteric regulation .

This involves an alteration in a protein’s shape as a result of a molecule binding to it.

A signal transduction pathway may produce short or long term responses.



A signal molecule, or ligand , fits into a three-dimensional site on the receptor protein.

Binding of the ligand causes the receptor to change its three-dimensional shape.

The change in shape initiates a cellular response.

Figure 5.12 A Signal Binds to Its Receptor



Ligands are generally not metabolized further, but their binding may expose an active site on the receptor.

Binding is reversible and the ligand can be released, to end stimulation.

An inhibitor, or antagonist , can bind in place of the normal ligand.



Receptors can be classified by their location in the cell.

This is determined by whether or not their ligand can diffuse through the membrane.



Cytoplasmic receptors have ligands, such as estrogen, that are small or nonpolar and can diffuse across the membrane.

Membrane receptors have large or polar ligands, such as insulin, that cannot diffuse and must bind to a transmembrane receptor at an extracellular site.



Receptors are also classified by their activity:

• Ion channel receptors

• Protein kinase receptors

• G protein–linked receptors



Ion channel receptors , or gated ion channels , change their threedimensional shape when a ligand binds.

The acetylcholine receptor , a ligandgated sodium channel, binds acetylcholine to open the channel and allow Na + to diffuse into the cell.



Protein kinase receptors change their shape when a ligand binds.

The new shape exposes or activates a cytoplasmic domain that has catalytic

(protein kinase) activity.

Figure 5.13 A Protein Kinase Receptor



Protein kinases catalyze the following reaction:

ATP + protein



ADP + phosphorylated protein

Each protein kinase has a specific target protein, whose activity is changed when it is phosphorylated.



Ligands binding to G protein –linked receptors expose a site that can bind to a membrane protein, a G protein .

The G protein is partially inserted in the lipid bilayer, and partially exposed on the cytoplasmic surface.



Many G proteins have three subunits and can bind three molecules:

• The receptor

• GDP and GTP, used for energy transfer

• An effector protein to cause an effect in the cell



The activated G protein –linked receptor exchanges a GDP nucleotide bound to the G protein for a higher energy GTP.

The activated G protein activates the effector protein, leading to signal amplification.

Figure 5.14 A G Protein

–Linked Receptor

Concept 5.6 Signal Transduction Allows the Cell to Respond to Its

Environment

Signal activation of a specific receptor leads to a cellular response, which is mediated by a signal transduction pathway.

Signaling can initiate a cascade of protein interactions —the signal can then be amplified and distributed to cause different responses.


Environment

A second messenger is an intermediary between the receptor and the cascade of responses.

In the fight-or-flight response, epinephrine

(adrenaline) activates the liver enzyme glycogen phosphorylase.

The enzyme catalyzes the breakdown of glycogen to provide quick energy.


Environment

Researchers found that the cytoplasmic enzyme could be activated by the membrane-bound epinephrine in broken cells, as long as all parts were present.

They discovered that another molecule delivered the message from the “first messenger,” epinephrine, to the enzyme.

Figure 5.15 The Discovery of a Second Messenger (Part 1)

Figure 5.15 The Discovery of a Second Messenger (Part 2)


Environment

The second messenger was later discovered to be cyclic AMP (cAMP).

Second messengers allow the cell to respond to a single membrane event with many events inside the cell —they distribute the signal.

They amplify the signal by activating more than one enzyme target.

Figure 5.16 The Formation of Cyclic AMP


Environment

Signal transduction pathways involve multiple steps —enzymes may be either activated or inhibited by other enzymes.

In liver cells, a signal cascade begins when epinephrine stimulates a G protein –mediated protein kinase pathway.


Environment

Epinephrine binds to its receptor and activates a G protein.

cAMP is produced and activates protein kinase A —it phosphorylates two other enzymes, with opposite effects:

• Inhibition

• Activation

Figure 5.17 A Cascade of Reactions Leads to Altered Enzyme Activity (Part 1)

Figure 5.17 A Cascade of Reactions Leads to Altered Enzyme Activity (Part 2)


Environment

• Inhibition —protein kinase A inactivates glycogen synthase through phosphorylation, and prevents glucose storage .

• Activation —Phosphorylase kinase is activated when phosphorylated and is part of a cascade that results in the liberation of glucose molecules .


Environment

Signal transduction ends after the cell responds —enzymes convert each transducer back to its inactive precursor.

The balance between the regulating enzymes and the signal enzymes determines the cell’s response.

Figure 5.18 Signal Transduction Regulatory Mechanisms


Environment

Cells can alter the balance of enzymes in two ways:

• Synthesis or breakdown of the enzyme

• Activation or inhibition of the enzymes by other molecules


Environment

Cell functions change in response to environmental signals:

• Opening of ion channels

• Alterations in gene expression

• Alteration of enzyme activities

Answer to Opening Question

Caffeine is a large, polar molecule that binds to receptors on nerve cells in the brain.

Its structure is similar to adenosine, which binds to receptors after activity or stress and results in drowsiness.

Caffeine binds to the same receptor, but does not activate it —the result is that the person remains alert.

Figure 5.19 Caffeine and the Cell Membrane (Part 1)

Figure 5.19 Caffeine and the Cell Membrane (Part 2)

Chapter 5 - Cloudfront.net

Cell Membranes and

Signaling

Related documents

Products

Support

Chapter 5 - Cloudfront.net

Cell Membranes and

Signaling

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib