EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
10.4 Telecommunications Additional Code Lists
This section contains data elements maintained by the OBF EDI Guideline Consistency
Subcommittee (EGCS) or an external source. For the maintained code lists of DE150, DE560,
DE751, DE822, DE1000, DE1271 and DE1301 the complete list of code values are shown. For
DE26, DE66, DE100, DE116 and DE156 external sources, a contact is given from which the user
can obtain a current list. DE128, DE235 and DE1104 contain code lists that are subsets of ASC
X12 maintained code lists for which either EGCS maintains associated phrase codes and values,
or, associated values are found in an external code list.
All EGCS maintained codes listed in Section 10.4 can be used immediately, regardless of
the X12 Version/Release listed in the header of this document. The Version/Release
number is only used to identify the attributes that the ASC X12 Data Elements are related
to.
NOTE 1: Common Language is a registered trademark and CLEI, CLLI, CLCI, and CLFI are trademarks of
Telcordia Technologies
NOTE 2: Starting in January 2004, the 10.4 section will reflect all references and language to the new
ATIS structure, which eliminates the Telecommunications Industry Forum (TCIF) entity and moves
the EGCS unit within the Ordering and Billing Forum (OBF) functional group of ATIS.
26 Country Code
TYPE=ID MIN=2 MAX=3
Code identifying the country.
SOURCE: (X12 Code Source 5)
Codes for Representation of Names of Countries,
ISO 3166-(Latest Release)
Codes for Representation of Currencies and
Funds, ISO 4217-(Latest Release)
AVAILABLE FROM:
American National Standards Institute, Inc.
25 W. 43rd St., 4th Floor
New York, NY 10036
INTERNET: http://www.ansi.org
ABSTRACT:
Part 1 (Country Codes) of the ISO 3166
international standard establishes codes that
represent the current names of countries,
dependencies, and other areas of special
geopolitical interest, on the basis of lists of country
names obtained from the United Nations. Part 2
(Country subdivision codes) establishes a code
that represents the names of principal
administrative divisions, or similar areas, of the
countries included in Part 1. Part 3 (Codes for
formerly used names of countries) establishes a
code that represents non-current country names,
i.e., the country names deleted from ISO 3166
since its first publication in 1974. Most currencies
are those of the geopolitical entities that are listed
in ISO 3166, Part 1, Codes for the Representation
December 2014
of Names of Countries. The code may be a threecharacter alphabetic or three-digit number. The
two leftmost characters of the alphabetic code
identify the currency authority to which the code is
assigned (using the two character alphabetic code
from ISO 3166, if applicable). The rightmost
character is a mnemonic derived from the name of
the major currency unit or fund. For currencies not
associated with a single geographic entity, a
specially-allocated two-character alphabetic code,
in the range XA to XZ identifies the currency
authority. The rightmost character is derived from
the name of the geographic area concerned, and is
mnemonic to the extent possible. The numeric
codes are identical to those assigned to the
geographic entities listed in ISO 3166. The range
950-998 is reserved for identification of funds and
currencies not associated with a single entity listed
in ISO 3166.
66 Identification Code Qualifier
TYPE=ID MIN=1 MAX=2
Code designating the system/method of code
structure used for Identification Code (DE 67).
CODE
41
DESCRIPTION of DE66 Code
Telecommunications Carrier
Identification Codes (CIC Codes)
SOURCE: (X12 Code Source 719)
NANPA – North American Numbering
Plan Administration
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE66 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
AVAILABLE FROM:
NANPA – North American Numbering
Plan Administration
46000 Center Oak Plaza, Building 10
Sterling, VA. 20166
DESCRIPTION of DE66 Code
telephone billing arrangements.
SOURCE:
OCN – Operating Company Number
INTERNET: http://www.nanpa.com
AVAILABLE FROM:
NECA– National Exchange Carrier
Association
80 South Jefferson Road
Whippany, NJ 07981
ABSTRACT: Provides and maintains a
list of telecommunications carrier
identification codes which are used in
the ordering and billing of
telecommunications services.
INTERNET: www.neca.com
42
Telecommunications Pseudo Carrier
Identification Code
ABSTRACT: Provides and maintains a
list of Operating Company Number
(OCN) codes which are used in the
routing and settlement of messages and
charges between telecommunications
carriers.
A code similar to the standard Carrier
Identification Code which is used to
identify the local exchange service
providers. See SOURCE information
below.
SOURCE:
COMMON LANGUAGE EC Codes Telcordia Technologies practice BR
751-100-112
NOTE: The specific code source used
for any given application may be
subject to trading agreement.

AVAILABLE FROM:
Telcordia Technologies
COMMON LANGUAGE Products
Customer Support Center
45 Knightsbridge Road
Piscataway, NJ 08854
TelecommunicationsEDI Guidelines
for TELEPHONE BILLING
applications use Pseudo-CIC Codes
found in Appendix B of this
document.

TelecommunicationsEDI
Guidelines for SERVICE
ORDERING applications use
OCN and Common Language
EC codes.
INTERNET: www.commonlanguage.com
ABSTRACT: COMMON LANGUAGE
Products provide the ability to
communicate effectively within your
company and with customers, suppliers,
and other telecommunications
providers. COMMON LANGUAGE
products facilitate network and service
management, increase operational
efficiency, provide interoperability and
increase customer satisfaction. They
include Network Identification,
Equipment Identification and Service
Information.
SOURCE:
Pseudo-CIC Codes
TelecommunicationsEDI Guidelines,
Section 10.4, Appendix B
AVAILABLE FROM:
Alliance for Telecommunications
Industry Solutions
1200 G Street, N. W., Suite 500
Washington, DC 20005
(202) 628-6380
91
Assigned by Seller or Seller's Agent
INTERNET: http://www.atis.org
ABSTRACT: Provides and maintains a
list of pseudo-CIC codes for use in
December 2014
A code similar to the standard Carrier
Identification Code which is used to
identify the service provider.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE66 Code
NOTE: The specific code source used
for any given application may be
subject to trading agreement.

Telecommunications EDI
Guidelines for TELEPHONE
BILLING applications use this
qualifier when a CIC or pseudo
CIC (Section 10.4 Appendix B)
is not applicable. DE 67 may be
an OCN code.
SOURCE:
OCN – Operating Company Number
AVAILABLE FROM:
NECA– National Exchange Carrier
Association
80 South Jefferson Road
Whippany, NJ 07981
INTERNET: www.necaservices.com
ABSTRACT: Provides and maintains a
list of Operating Company Number
(OCN) codes which are used in the
routing and settlement of messages and
charges between telecommunications
carriers.
BE
Common Language Location
Identification (CLLI)
The standard address location code for
a specific equipment location as used in
the telephone industry
SOURCE: (X12 Code Source 138)
COMMON LANGUAGE Products
AVAILABLE FROM:
Telcordia Technologies
COMMON LANGUAGE Products
Customer Support Center
45 Knightsbridge Road
Piscataway, NJ 08854
INTERNET: www.commonlanguage.com
ABSTRACT: COMMON LANGUAGE
Products provide the ability to
communicate effectively within your
company and with customers, suppliers,
and other telecommunications
providers. COMMON LANGUAGE
products facilitate network and service
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE66 Code
management, increase operational
efficiency, provide interoperability and
increase customer satisfaction. They
include Network Identification,
Equipment Identification and Service
Information.
100 Currency Code
TYPE=ID MIN=3 MAX=3
Code (Standard ISO) for country in whose
currency the charges are specified.
SOURCE: (X12 Code Source 5)
Codes for Representation of Names of Countries,
ISO 3166-(Latest Release)
Codes for Representation of Currencies and
Funds, ISO 4217-(Latest Release)
AVAILABLE FROM:
American National Standards Institute, Inc.
25 W. 43rd St., 4th Floor
New York, NY 10036
INTERNET: http://www.ansi.org
ABSTRACT:
Part 1 (Country Codes) of the ISO 3166
international standard establishes codes that
represent the current names of countries,
dependencies, and other areas of special
geopolitical interest, on the basis of lists of country
names obtained from the United Nations. Part 2
(Country subdivision codes) establishes a code
that represents the names of principal
administrative divisions, or similar areas, of the
countries included in Part 1. Part 3 (Codes for
formerly used names of countries) establishes a
code that represents non-current country names,
i.e., the country names deleted from ISO 3166
since its first publication in 1974. Most currencies
are those of the geopolitical entities that are listed
in ISO 3166, Part 1, Codes for the Representation
of Names of Countries. The code may be a threecharacter alphabetic or three-digit number. The
two leftmost characters of the alphabetic code
identify the currency authority to which the code is
assigned (using the two character alphabetic code
from ISO 3166, if applicable). The rightmost
character is a mnemonic derived from the name of
the major currency unit or fund. For currencies not
associated with a single geographic entity, a
specially-allocated two-character alphabetic code,
in the range XA to XZ identifies the currency
EDI GUIDELINE
GENERAL SECTION
authority. The rightmost character is derived from
the name of the geographic area concerned, and is
mnemonic to the extent possible. The numeric
codes are identical to those assigned to the
geographic entities listed in ISO 3166. The range
950-998 is reserved for identification of funds and
currencies not associated with a single entity listed
in ISO 3166.
116 Postal Code
TYPE=ID MIN=3 MAX=15
Code defining international postal zone code
excluding punctuation and blanks (zip code for
United States).
INDUSTRY CONVENTIONS
ASC X12 Version 004050
128 Reference Identification
Qualifier
TYPE=ID MIN=2 MAX=3
Code qualifying the Reference Identification.
Codes listed here are those for which:
 EGCS maintains a list of associated "phrase
codes" for use in REF02, REF03, N902 or
N903 which are listed with the qualifier;
 EGCS's use of the qualifier requires the use of
values maintained by an external source.
CODE
11
The USPS Domestic Mail Manual
AVAILABLE FROM:
U. S. Postal Service
Washington, DC 20260
ABSTRACT:
The ZIP Code is a geographic identifier of areas
within the United States and its territories for
purposes of expediting mail distribution by the U.
S. Postal Service. It is five or nine numeric digits.
The ZIP Code structure divides the US into ten
large groups of states. The leftmost digits
identifies one of these groups. The next two digits
identify a smaller geographic area within the large
group. The two rightmost digits identify a local
delivery area. In the nine-digit ZIP Code, the four
digits that follow the hyphen further subdivide the
delivery area. The two leftmost digits identify a
sector which may consist of several large
buildings, blocks, or group of streets. The
rightmost digits divide the sector into segments
such as a street, a block, a floor of a building, or a
cluster of mailboxes.
The USPS Domestic Mail Manual includes
information on the use of the 11 digit ZIP Code.
December 2014
Account Number
Valid Entries for DE352 (REF03)
AAN
Associated Account Number
AN
Account Number
ATN
Account Telephone Number
EAN
Existing Account Number
EATN
Existing Account Telephone
Number
LEAN
Line EAN
LEATN Line EATN
NAN
New Account Number
NATN
New Account Telephone
Number
SMDRAC SMDR Account code
SOURCE: (X12 Code Source 51)
National ZIP Code and Post Office Directory,
Publication 65
New Orders
Superintendent of Documents
P.O. Box 371954
Pittsburgh, PA 15250-7954
DESCRIPTION of DE128 Code
12
Billing Account Number
Valid Entries for DE352 (REF03)
BAN
Billing Account Number
BAN1 Billing Account Number 1
BAN2 Billing Account Number 2
DBAN1 DSR Billing Account Number 1
DBAN2 DSR Billing Account Number 2
VAN
Vertical Account Number
1Q
Error Identification Code (Error remarks)
Valid entries for DE127 (N902)
ERR
Error Notice Processing
Codes and or Text messages
describing the error
conditions detected in a
validation process.
Valid entries for DE369 (N903)
ERRCOD Error Code
E
Identifies the code associated
with the error message.
LECODE Listing Error Code
Identifies an error condition
discovered while processing
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE128 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
1V
2I
AVAILABLE FROM:
Center for Communications
Management Information
11300 Rockville Pike, Suite 1100
Rockville, MD 20852-3030
1-888-ASK-CCMI (1-888-275-2264)
INTERNET: www.ccmi.com
ABSTRACT: CCMI's LATA Directory
shows area codes and exchange
numbers within each LATA across the
U.S., including LATAs within states,
numeric list of LATAs, alphabetical list of
LATA names, rate center directory by
LATA, and LATAs by NPA and NXX.
Updated twice a year.
Related Vendor Order Number
Valid Entries for DE352 (REF03)
DLRORD Directory Listing Related
Order Number
DARORD Directory Assistance Related
Order Number
RORD
Related Order Number
4N
Tracking Number
The following notes apply to the use of
this code for Service Ordering:
Location-specific Services Reference
Number
Special Payment Reference Number
The following notes apply to the use of
this code for Service Ordering:
For a list of Valid Values used with this
code for DE127 (REF02) see the current
issue of the OBF Local Service Ordering
Guidelines (LSOG).
Valid Entries for DE352 (REF03):
DSRNO Directory Service Request
Number
LSRNO Local Service Request Number
VSRNO Vertical Service Request
Number
4L
DESCRIPTION of DE128 Code
SOURCE:
LATA Directory
a directory service request.
PRESPC Provider Response Code
Identifies a provider specific
code on the response
transaction that represents
what occurred on the
associated inquiry
transaction.
RESPC Response Code
An OBF maintained code
which identifies a code on the
response transaction that
represents what occurred on
the associated inquiry
transaction.
Valid Entries for DE352 (REF03)
BI1
Billing Account ID 1
BI2
Billing Account ID 2
DBI1
DSR Billing Account ID 1
DBI2
DSR Billing Account ID 2
55
For CABS BOS billing applications this
qualifier is used to provide LATA code
information. The LATA code is the
common language code for EC Local
Access Transport Areas in which
service is being provided
Sequence Number
Identifies whether the transfer telephone
numbers are primary or secondary.
Also used to identify the Hunting
sequence number (s).
Valid Entries for DE352 (REF03)
PRI
Primary
SEC
Secondary
Valid Entries for DE369 (N903)
HTSEQ Hunt Sequence
82
Data Item Description (DID) Reference
Valid entries for DE127 (N902)
APPTINFO Appointment Information
Identifies the access
information, e.g., hours,
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE128 Code
for the appointment
CODEDES Code Description
Identifies the description
of the information in the
CODE field
CR
Cross Reference
Text portion of a cross
reference listing or tie
back text, e.g., See Smith
and Smit.
DCGMU
Design Cable Gauge
Make-Up
Identifies the loop makeup by cable gauge and
length.
DES
Designation
Professional designation
phrase of a business
listing.
DISPNOTES Dispatch Notes
Dispatch or log
information associated
with the service order.
EMAT
Email Listing Text
Identifies the text that will
appear on an Email
address listing that is
associated with a main
listing.
FAINFO
File After Information
HADDR
Header Address
Caption or SLU header
address as it appears in
the directory.
INADDR
Indent Level Address
Address on the prior level
indent.
INTEXT
Indent Level Text
Text on the prior level
indent.
ITEXT
Indent Text
Text for caption subheads
or caption/SLU indents
along with address and
telephone number e.g.,
Reservations.
LISTADR
Listed Address
Combined elements from
the request that provide
the address as it will be
listed in Directory and
or Directory Assistance.
LISTNM
Listed Name
Identifies the name
contained in the listing. It
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE128 Code
LISTTEXT
LNFN
LNLN
LNPL
LOI
LTEXT
LTXTY
MSDAPT
NICK
OMSD
contains the elements that
were received in the
LNLN, LNFN, DES, TL,
TITLE1, TITLE2 and NICK
fields on the directory
service request.
Listing Text
Text that appears in a
directory listing other than
the name and address.
Listed Name First
First word for business
listings or all of the first
name or names and
middle name or initials for
residence listings.
Listed Name Last
First word for business
listings or the complete
last name for residence
listings.
Listed Name Placement
Identifies the placement of
the listing based on the
LNLN field.
Line of Information
Descriptive or informative
text that appears in the
directory to assist the end
user, e.g., call Between 9
and 5.
Listing Text
Text that appears in a
directory listing other than
the name and address.
Listing Text Type
Identifies the type of
associated text that will
appear in the directory
listing to assist the end
user. For a list of Valid
Values used with this code
in DE369 (N903) see the
current issue of the OBF
Local Service Ordering
Guidelines (LSOG).
Missed Appointment
Information
The reason the
appointment was not met.
Nickname
A listed person's
nickname.
Omit from Second
Directory
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE128 Code
Indicates the secondary
directory or directories this
listing is not to appear in.
ORCD
Order Response Code
Detail
Provides a description of
the response code.
PLA
Place Listing As
Special filing words that
should be used instead of
the listed name if the
customer wishes to
override the normal
sequencing.
PLINFO
Prior Level Information
SEQADDR Sequence Address
Address text of an indent
that a sequence override
should follow.
SEQADDR1 Sequence Address 1
Address text of an indent
that a sequence override
should follow.
SEQTEXT Sequence Text
Indent text that a
sequence override should
follow.
SEQTEXT1 Sequence Text 1
Indent text that a
sequence override should
follow.
SODETAIL Service Order Detail
Used to return a copy of
the service order in freeflowing text format.
SOSTATDE- Service Order Status
S
Description
TITLE1
Title of Address 1
A phrase used to address
a listed person, e.g. Mr.,
Dr, etc.
TITLE2
Title of Address 2
Additional phrases used to
address a listed person,
e.g. Mr., Dr, etc.
TL
Title or Lineage
A phrase used to
designate lineage of a
listed person, e.g. Jr., Sr.,
III, etc.
TNTC
Telephone Number Text
Centered
Centered, special
telephone text phrases,
e.g., dialing instructions.
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE128 Code
TNTL
TNTR
URLT
WPP
YPH
YPHV
9K
Telephone Number Text
Left
Left justified, special
telephone text phrases,
e.g., dialing instructions.
Telephone Number Text
Right
Right justified, special
telephone text phrases,
e.g., dialing instructions.
Internet Listing Text
Identifies the text that will
appear on an Internet
address listing.
White Pages Products
Information about the
White Page Products,
Signature Listings,
Personality Logo and
Lines of Distinction, e.g.,
SS = signature script, SB
= signature bold, etc.
Yellow Pages Heading
Alphanumeric code for
heading under which a
business is listed in the
Yellow Pages directory.
Yellow Page Heading
Verbiage
Text heading under which
a business is listed in the
Yellow pages directory.
Valid Entries for DE369 (N903)
LRC
Listing Response Code
Servicer
Valid Entries for DE352 (REF03)
SPIT Service Provider Indicator Type
Identifies the type of entry in the
SPN Service Provider Name
field. For a list of Valid Values
used with this code in DE127
(REF02) see the current issue
of the OBF Local Service
Ordering Guidelines (LSOG).
CO
Customer Order Number
Order number provided by the customer
that is used as the Purchase Order
Number (PON).
Valid Entries for DE352 (REF03)
DRPON Directory Related PON
RPON Related PON
EDI GUIDELINE
GENERAL SECTION
CODE
H7
DESCRIPTION of DE128 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE128 Code
Standard Clauses (Retained Remarks)
Valid entries for DE127 (N902)
AAI
Additional Address Information
ACC
Access Instructions
Remarks which define the
instructions for obtaining access
to a customer's premises for
installation of a service or
circuit. Codes of EU for End
User and RPLPRI and RPLSEC
will be used in N903 to indicate
Resale Private Line primary and
secondary.
ALOC Additional Location Detail
Identifies any necessary
location information and
indicates further definition of the
physical point of termination at
the location. Codes of RPLPRI
and RPLSEC will be used in
N903 to indicate primary and
secondary.
BLI
Billing Instructions
Provide unique billing
instructions.
DIR
Additional Directory Instructions
Provide additional instructions
about the format or content of
the directory listing.
ENG Engineering Notes
Information and specifications
provided by the Customer's
Engineer in configuring the
equipment for a particular job.
INS
Installation Notes
Information and requirements
provided by the customer to
assist in the Supplier's installers
when installing the equipment.
LIN
Line Item Notes
Information and specifications
provided by the customer for
line items.
LOC
Location Instructions
Remarks which define a location
used for a circuit or service.
ORI
Order Instructions
Remarks to expand upon or
clarify other data in the service
request or other data in a
directory request, identified by
the type of form
remarks listed in N903, e.g.,
December 2014
ORR
ORS
ROU
TCS
IX
LSR, EU, DSR, DL, DSCR, etc.
These remarks may be included
on an original service request or
included on a supplemental
service request to be appended
to the remarks on the original
request or included on a
separate directory request.
Replacement Order Instructions
Remarks on a supplemental
service request which replace
the remarks included on the
original request.
Telecommunications
Provider/Originated Order
Instructions
Remarks originated by a
telecommunications provider
during the processing of a
service request and returned to
the customer.
Routing Instructions
Instructions for the routing of
data circuits or other services
using designated
telecommunications circuits.
Transfer Calls Information
Additional instructions about call
transfers.
Item Number
Valid Entries for DE352 (REF03)
API
Attendant Position
Indicator
DELNUM
Delivery Reference
Number
DIDNUM
DID Reference Number
DLNUM
Directory Listing
Reference Number
DNUM
Disconnect Number
DREFNUM Directory Reference
Number
ERNUM
Error Detail Reference
Number
HNUM
Hunt Reference Number
INQRESNBR Inquiry Response Number
LEGNUM
Multipoint leg number
LNEX
Line Reference Number
Extension
LNUM
Line Reference Number
LOCNUM
Location Number
PONLEREFNPON Listing
UM
Confirmation/Error Code
Reference Number.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE128 Code
REFNUM
RESID
RNEX
RNUM
UNUM
VCNUM
LU
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Reference Number
Response Identifier
Reference Number
Extension
Reference Number
UNI Number
Virtual Connection
Number
SU
Special Processing Code
Valid Entries for DE352 (REF03)
CNTYPE Confirmation Type
DCNR Directory Confirmation Type
Returned
DRTR
DSR Response Type
Requested
RT
Response Type
RTR
Response Type Requested
TD
For OBF LSOG service ordering
applications this qualifier is used to
provide a reference number that
identifies the loop between the central
office and a serving terminal, for loop
qualification, also known as a Taper
Code.
Valid Entries for DE352 (REF03):
TC
Taper Code
Reason for Change
For a list of Valid Values used with this
code in DE127 (REF02) see the current
issue of the OBF Local Service Ordering
Guidelines (LSOG).
V0
Version
Letters or Notes (Non retained
Remarks)
For a list of related phrase codes, see
code H7
X3
MZ
Network Modifications Required
OW
A locally defined code that identifies the
network modifications necessary to
provide facilities to the service address.
Service Order Number
Valid Entries for DE352 (REF03)
BOPI
Bulk Order Package Identifier
CS01 Conversion Order 1
CS02 Conversion Order 2
DAORD Directory Assistance Order
Number
DLORD Directory Listing Order Number
LORD Loop Order Number
ORD
Order Number
ORDL Line Level Order Number
SON
Service Order Number
RE
DESCRIPTION of DE128 Code
Valid Entries for DE127 (REF02):
Y
Copy provided upon request.
S
Chart/date may be reviewed
only at the supplier location.
N
No copy/data available.
Valid Entries for DE369 (N903)
LRNUM
Listing Response Number
Location Number
For CABS BOS billing applications this
qualifier is used to provide Access
Customer Location information. This is
a common language CLLI code of the
terminal location of the access customer
providing the service.
L1
CODE
Release Number
December 2014
Valid Entries for DE352 (REF03)
BULK- Bulk Package Version
VER
PONVER Purchase Order Version
Identification
Defect Code
Valid Entries for DE127 (REF02):
AA
Automatic Assembly
AF
Automatic Fabrication
AT
Analytical Test
CT
Chemical Test
EC
Electrical Connecting
FT
Function Test
IP
Installation Process - Other
MA
Manual Assembly
MP
Marking or Packaging
MT
Mechanical Test
OT
Other types of defects/tests
PT
Physical Test
WC
Wiring and Cabling
150 Special Charge Code
TYPE=ID MIN=3 MAX=3
Code identifying type of special charge or
allowance.
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
EGCS MAINTAINED CODE VALUES
CODE
DESCRIPTION of DE150 Code
120
230
275
295
586
AAJ
ACD
ACF
ACH
ACS
AGR
Banking Drafts
Credit
Discount Incentive
Discount Special
Processing Charge
Adjustments
Allegheny County, PA Delivery Charge
Access Charge Federal
Access Charges
Access Charge State
Amount Base for Gross Receipts Tax
This code is used to display the amount
of calls collected for Gross Receipts
Tax.
Adjustment for Maximum Charges
Billing
Absolute Minimum Charge
Adjustment for Minimum Average Time
Requirement Billing
Adjustment for Minimum Charges Billing
Base charge used to depict the base on
which tax amounts are computed.
Cancellation Charge
Concession Credit
Customer Owned Party Telephone
Surcharge
Connect Charge
Commercial Radio Service Fee
Deposit
Disconnect Check Charge
Disconnect Charge
Digital Divide Fund
Deaf and Disabled Surcharge
Discount
Dispute
Exchange Access Credit
E911 Administration Charge
Expanded Local Calling Surcharge
Equal Access Surcharge
Emergency Service
Franchise Fee
Finance Charge
Federal Transfer Surcharge
Federal Universal Service
Groupage Discount
Gross Receipts Surcharge
Holding Charge
Invoice Adjustment
Infrastructure Maintenance Credit
Interest on security deposit
License Fee
Long Term Number Portability
AMB
AMC
AMP
ANB
BAS
CAA
CCR
CEF
COC
CRS
DAB
DCC
DCS
DDF
DDS
DSC
DSP
EAC
EAD
ECL
EQA
ESC
FFA
FFI
FTC
FUS
GRD
GRS
HDG
IIA
IMC
ISD
LAE
LNP
December 2014
LPA
LPC
LPP
LSS
MEM
MGA
MGC
MMF
MSG
MUS
NPF
NPI
NPS
OFL
OLC
OLM
ORC
PAD
PAH
PAI
PCC
PCR
PEN
PMC
PPO
PPP
PPU
PSP
QQD
RAA
RCS
REE
RFD
ROW
RRR
SAF
SAP
SER
SMF
SMS
SSO
STC
SUF
DESCRIPTION of DE150 Code
Surcharge
Late Payment Charge Alternate
Late payment charge
LPC - Previous Segment
Lifeline Surcharge
Membership Fee(s)
Message Rate Adjustment
Message Charge
Municipal Maintenance Charge
Miscellaneous Charge
Municipal Surcharge
No PIC Federal Charge
No PIC Intra
No PIC State Charge
Official Service
A code used to identify charges that are
for official company business. These
amounts are not due or payable to the
provider, e.g. the provider does not pay
itself. Use of this code is to be
negotiated in your trading partner
agreement.
Other Line Charge - Canadian Portion
(See Note 3 in Appendix A)
Other Line Charge - Mexican Portion
(See Note 3 in Appendix A)
Operator Credit
Premium Charge
Promotional Allowance
Promotional Discount
Poison Control Center Surcharge
Performance Credit
Penalty
Prior Month Credit
Per Order Charge
Payphone Public Policy Surcharge
Prepaid Usage Allowance
Payphone Service Provider Surcharge
Quantity Discount
Rebate
Reconnect charge
Regulatory Fee
Refund
Rights of Way Use Fee
Regulatory required refund
Special Credit
Service Assistance Program Surcharge
Service Charge
State Maintenance Charge
State/Metropolitan Transit Authority
Surcharge.
Pole, Wood-service Charge
State Surcharge
Set Use Fee - Customer Charge
(See Note 3 in Appendix A)
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE150 Code
SUR
SUS
TCB
TDC
Surcharge
State Universal Service
Telegram Charge back
Telecomm. Device for the Deaf Credit
This credit is given to customers for
hearing-impaired individuals, which use
certain services and are allowed,
credits.
Transfer Payment
Transferred Charges or Credit from
Another Account or Invoice
Transferred Charges or Credit to
Another Account or Invoice
Transfer Local Tax
(See Note 3 in Appendix A)
Transferred Charges
Transfer State Tax
(See Note 3 in Appendix A)
Tax Surcharge
Universal Access Fund
Charge Code used to identify the
amount that is charged to cover
uncollectable bill amounts.
Usage Plan Detail Charge
Buried Facilities Surcharge
Volume Discount
Wide Area Telephone Service (WATS)
Usage Credit
Mutually Defined
(See Note 1 in Appendix A)
TPP
TR1
TR2
TRL
TRS
TRT
TXS
UAF
UNC
UPD
UTL
VAB
WAT
ZZZ
156 State or Province Code
TYPE=ID MIN=2 MAX=2
Code (Standard State/Province) as defined by
appropriate government agency.
SOURCE: (X12 Code Source 22)
National ZIP Code and Post Office Directory
AVAILABLE FROM:
US Postal Service
National Information Data Center
P.O. Box 2977
Washington, DC 20013
ABSTRACT:
Provides names, abbreviations, and codes for the
50 states, the District of Columbia, and the outlying
areas of the US. The entities listed are considered
to be the first order divisions of the US
Microfiche available from NTIS (same as address
above). The Canadian Post Office lists the
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
following as “official” codes for Canadian
Provinces:
CODE
AB
BC
MB
NB
NF
NS
NT
ON
PE
PQ
SK
YT
PROVINCE
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland
Nova Scotia
North West Territories
Ontario
Prince Edward Island
Quebec
Saskatchewan
Yukon
235 Product/Service ID Qualifier
TYPE=ID MIN=2 MAX=2
Code identifying the type/source of the descriptive
number used in Product/Service ID (234).
EGCS MAINTAINED CODE VALUES
CODE
A6
DESCRIPTION of DE235 Code
Document Identification Code
To facilitate the identification of detail
level data, the Document Identification
Code of “A6” will be passed at the PO1
level to specifically identify what type of
data the sender wants the receiver to
process.
Valid DE 234 Entries:
CKT
Circuit Detail Section
CTXCB CENTREX Common Block
CTXSD CENTREX Station Details
DDA
Directory Delivery Address
DID
Direct Inward Dialing
DL
Directory Listing
DIR
Local Response (LR) Directory
DSC
Disconnect
DSCN
Directory Service Completion
Notice
DSCR
Directory Service Caption
Request
DSR
Directory Service Request
DSRED Directory Service Request
Error Detail
EU
End User
HNT
Hunting, Resale and
Unbundled Local Switching
(Port) practices
HNTR
Local Response (LR) Hunt
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE235 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Group
RPLPRI Resale Private Line (RPL)
Primary (PRI)
RPLR
Resale Private Line (RPL)
Remarks
RPLSEC Resale Private Line (RPL)
Secondary (SEC)
SECLOC Local Response (LR)
Secondary Location
(SECLOC)
SS
Service Specific (see
REQTYP)
UNI
UNI Circuit Detail Section of
Resale Frame Relay Line
CI
Requested) use the following values for
data element 234 to define the specific
service requested.
Valid DE 234 Entries:
NL Non List Listing
(See Note 6 in Appendix A)
NP Non Publish listing
(See Note 6 in Appendix A)
OA Omit Address
(See Note 6 in Appendix A)
WIRN New Wiring Service Requested
WIRP Partial Installed Wiring Service
Requested
WIRR Reuse Wiring Service
Requested
Common Language Equipment Identifier
(CLEI)
OBF maintains a list of Valid Values for
Directory Listing Record Type (RTY)
which may be used with the SH code.
See the current issue of OBF Local
Service Ordering Guidelines (LSOG) for
a list of these values.
SOURCE: (X12 Code Source 138)
COMMON LANGUAGE Products
AVAILABLE FROM:
Telcordia Technologies
COMMON LANGUAGE Products
Customer Support Center
45 Knightsbridge Road
Piscataway, NJ 08854
INTERNET: www.commonlanguage.com
ABSTRACT: COMMON LANGUAGE
Products provide the ability to
communicate effectively within your
company and with customers, suppliers,
and other telecommunications
providers. COMMON LANGUAGE
products facilitate network and service
management, increase operational
efficiency, provide interoperability and
increase customer satisfaction. They
include Network Identification,
Equipment Identification and Service
Information.
LS
Load Sequence
To be used with Sequence Override to
identify that normal alphabetic
sequencing in caption should be
overridden for this listing. For a list of
Valid Values used with this code see the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
SH
Service Requested
When data element 235 = SH (Service
December 2014
DESCRIPTION of DE235 Code
SV
Service Rendered
When data element 235 = SV (Service
Rendered) use the following values for
DE 234 to define the specific service
rendered.
Valid DE 234 Entries:
0110 Recurring
0115 Trouble Isolation
Plan/Maintenance
0200 Monthly Service Charge
0205 Basic Service
0210 Wiring
0215 Zone
0220 Summary Charge
0225 Mileage Charge
0230 Paging
0250 CENTREX/ESSX
0300 Access Charges
0315 Access/Data Services
0305 Service and Equipment
Information
0310 CABS Facility Access
0400 Other Charges and
Credits/Additions and Changes
0500 Itemized Calls
0510 Interexchange Carrier Invoice
Charges
0520 Itemized Charges/Credits
0600 Directory Advertising
0700 Usage
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE235 Code
0705
0710
0715
0800
0900
0905
1000
1100
1105
1110
1200
1250
1400
1410
1420
1425
1430
1450
1460
1500
1600
1605
1610
1615
1650
1700
1710
1720
1730
1740
1750
1760
1770
1780
1790
1800
1810
1820
1830
1840
1850
1860
1870
1880
1910
1920
December 2014
Measured Service
Message Rate Service
CABS Usage
Optional Call Plan/Discount Plan
Directory Assistance
Direct Customer Access
WATS
Mobile/Cellular/Personal
Communications Service Usage
Airtime
Roamer
Equipment
Testing
Other Voice Services
Advanced Intelligent Network
ISDN Service
VIP
Remote Call Forwarding (RCF)
Information Services
Customer Owned Pay Telephone
FAX Service
Non-Voice Service
Packet Switching
Electronic Mail/Messaging
Service
CLASS Services
Video Services
Service Interruption Credit
(See Note 4 in Appendix A)
Customized Billing Service
Non Recurring
(See Note 4 in Appendix A)
Rate Change (See Note 4 in
Appendix A)
Miscellaneous
Service Order
Installation
(See Note 4 in Appendix A)
Fractional
(See Note 4 in Appendix A)
Route Advance
Call Trace
Pulse Link
Foreign Exchange (FEX)
Voice Mail
Extended Area
Non regulated
976
Additional Usage
Additional Calls
800 Common Line
Billing/Transaction Processing
Charges
Data Conversion/Transmission
Charges
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE235 Code
1950
1960
1970
1980
1990
2000
2010
2020
2030
2040
2050
2060
2070
2110
2120
2130
2500
2600
WJ
InWATS/800 Service
OutWATS
Call Completion
Ineffective Attempts
Other Line Charge
Command-A-Link
Directory Product
Alternate Destination Routing
Charge
Community Optional Calling
Service
Community Optional Service
Usage
Total Amount Billed (for
Summary/Consolidated Billing
Only)
Set Use Fee
Ring No Answer
Contracts/Discounts
Recharged Calls
Transport Charges
Purchases
CABS Late Payment Charges
Telecom Service Type
When DE 235 = WJ (Telecom Service
Type) use the following values for DE
234 to define the limited types of
charges being billed.
Valid values for DE 234:
1
Recurring Charge
2
Other Charges
3
Usage
4
Summary/Combined Charges
Note: Code WJ will be available in
004020 (See Note 9 in Appendix
A). For implementations based on
X12 version/release prior to
004020 use "ZZ" instead.
ZZ
559
Mutually Defined
Agency Qualifier Code
TYPE=ID MIN=2 MAX=2
Code identifying the agency assigning the code
values.
CODE
BE
DESCRIPTION of DE559 Code
Telcordia Technologies
SOURCE: (X12 Code Source 138)
COMMON LANGUAGE Products
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE559 Code
AVAILABLE FROM:
Telcordia Technologies
COMMON LANGUAGE Products
Customer Support Center
45 Knightsbridge Road
Piscataway, NJ 08854
INTERNET: www.commonlanguage.com
ABSTRACT: COMMON LANGUAGE
Products provide the ability to
communicate effectively within your
company and with customers, suppliers,
and other telecommunications
providers. COMMON LANGUAGE
products facilitate network and service
management, increase operational
efficiency, provide interoperability and
increase customer satisfaction. They
include Network Identification,
Equipment Identification and Service
Information.
TI
Telecommunications Industry
SOURCE: (X12 Code Source 46)
Telecommunications Industry Codes
EDI Telecommunications Service
Characteristics Qualifiers and Codes
AVAILABLE FROM:
Alliance for Telecommunications
Industry Solutions (ATIS)
1200 G Street, N. W., Suite 500
Washington, DC 20005
(202) 628-6380
INTERNET: http://www.atis.org
ABSTRACT: The Guidelines and
Service Characteristic Qualifiers and
Codes list the suggested codes to be
used in the industry. The codes in the
Guidelines are subsets of the ASC
X12.3 Data Element Dictionary. The
Service Characteristic Qualifiers and
Codes contain the industry-maintained
codes for the service ordering and billing
processes in the industry.
560 Special Services Code
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
TYPE=ID MIN=2 MAX=10
Code identifying the special service.
EGCS MAINTAINED CODE VALUES
CODE
2T
AO
CA
CC
CD
CMPLX
CP
DESCRIPTION of DE560 Code
Two-Tier Pricing Contract
Administrative Overhead Percentage
City
CENTREX Line Capacity Contract
Customer Calling Discounts
Complex
CENTREX Service Transport Facility
Contract
CPB
Commitment Plan Base
CPL
Commitment Plan
CPO
Commitment Plan Outage
CT
Contract/Tariff Plan
CY
County
DP
Disabled Person Discount
DSP
Dispute
ER
Interstate/IntraLATA
FD
Federal
FS
Federal and State
IA
Intrastate
IR
Interstate
LO
Local
MP
Municipal
ND
Non Distinct
NREG
Non Regulated
OP
Optional Payment Discount
PB
Previous Bill(s)
PP
Percentage Pricing Contract Plan
PR
Promotion Discount
RESCUS
Resolved-Customer
RESEC
Resolved-Exchange Carrier
RR
Intrastate/IntraLATA
RS
Rate Stability Plan
SA
Special Assembly Charge
SL
State and Local
ST
State
SUFINALT Set Use Fees (IntraLATA)
SUFLOCAL Set Use Fees (Local)
SVO
Service Outage
TL
Termination Liability Charge
TOL
Toll
UNRES
Unresolved
VP
Volume Pricing Plan
VT
Variable Term Contract Pricing Plan
Z1
Mutually Defined
(See Note 1 in Appendix A)
Z2
Mutually Defined
(See Note 1 in Appendix A)
Z3
Mutually Defined
(See Note 1 in Appendix A)
Z4
Mutually Defined
EDI GUIDELINE
GENERAL SECTION
CODE
Z5
Z6
Z7
Z8
Z9
ZZ
INDUSTRY CONVENTIONS
ASC X12 Version 004050
DESCRIPTION of DE560 Code
CODE
DESCRIPTION of DE751 Code
(See Note 1 in Appendix A)
Mutually Defined
(See Note 1 in Appendix A)
Mutually Defined
(See Note 1 in Appendix A)
Mutually Defined
(See Note 1 in Appendix A)
Mutually Defined
(See Note 1 in Appendix A)
Mutually Defined
(See Note 1 in Appendix A)
Mutually defined
(See Note 1 in Appendix A)
MTL
PLG
SFW
SS
Material Affected
Plug-in Affected
Software Affected
Subsystem Affected
751 Product Description Code
TYPE=AN MIN=1 MAX=12
A code from an industry code list, which provides
specific data about a product characteristic.
QR1 - Activity Codes
CODE
DESCRIPTION of DE751 Code
AL
CA
Quality or Reliability Alert Report.
Corrective Action/Quality Improvement
Report
Independent Validation Audit Sample
– Supplier Internal
Report of Periodic (Re) Qualification
Quantity Allocation Only
Report of Material Disposition
Supplier Data Report
Report of Software Metrics
Independent Validation Audit Sample
– Non-Affiliate
DV
PQ
QT
RD
SD
SM
VA
AFCHAR – Affected Characteristics Codes
CODE
FI
MA
PO
RE
SF
SV
TF
TR
DESCRIPTION of DE751 Code
Fire Affected
Maintenance Affected
Power Affected
Reliability Affected
Safety Affected
Service Affected
Traffic Effected
Transmission Affected
PCNSTAT – Product Change Notice Codes
QR2 - QA Sample Status Codes
CODE
R
S
X
DESCRIPTION of DE751 Code
C
DD
H
IC
ICR
N
TC
V
W
Y
Completed
Document Distribution
Telco Hold
Installer Change
Installers Change Rotation
Not Working – Awarding Material
Telco Responsible for Change
Vendor Hold
Workable - Material has Shipped
Cancelled
DESCRIPTION of DE751 Code
FMW
HDW
MS
Firmware Affected
Hardware Affected
Major System Affected
December 2014
DESCRIPTION of DE751 Code
AA
Change to End User Information
Valid Entries in DE1073 (PID08)
Y = Change to End User Information
N = No Change to End User Information
AB
Change to Directory Listing Information
Valid Entries in DE1073 (PID08)
Y = Change to Directory Listing
Information
N = No Change to Directory Information
AC
Dispatch Required
Valid Entries in DE1073 (PID08)
Y = Dispatch Required
N = No Dispatch Required
AD
Reference of Calls Requested
Valid Entries in DE1073 (PID08)
Y = Reference to Calls Requested
PHYCHAR – Physical Characteristics Codes
CODE
Samples Not Included
Samples Included
Validation Audit Samples are not to be
Counted with Routine Q&RC Data
SO-RSQ - Service Order - Reseller Questions
List
CODE
CODE
DESCRIPTION of DE751 Code
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE751 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
N = No Reference to Calls Requested
DESCRIPTION of DE751 Code
N = Jack is not Requested
AE
Yellow Pages Advertising Follow-up
Requested
Valid Entries in DE1073 (PID08)
Y = YP Advertising Follow-up Request.
N = No YP Advertising Follow-up
Request.
AN
Special Construction is Authorized
Valid Entries in DE1073 (PID08)
Y = Special Construction is Preauthorized
N = Special Construction not Preauthorized
AF
End User Moving Indicator
Indicates when the end user location is
changing. A yes/no flag to indicate that
end user address information may be
required to ensure eligibility for
telephone number portability.
Valid Entries in DE1073 (PID08)
Y = End User is Moving
N = End User is not Moving
AO
Agency Authorization Status
Valid Entries in DE1073
Y = LSP is authorized as end user’s
agent
N = LSP is not authorized as end user’s
agent
AP
Additional Point of Termination Indicator
Valid Entries in DE 1073 (PID08)
Y = APOT field contains the CLLI code
AQ
Existing Advertising (EA)
Valid Entries in DE1073 (PID08)
Y = End User has existing advertising
N = End User does not have existing
advertising
U = Unknown
AR
Omit Telephone Number
Valid Entries in DE1073 (PID08)
Y = O - Omit telephone number
AS
Listed Name Placement
Valid Entries in DE1073 (PID08)
Y = L - Letter placement
AT
Address Indicator
Valid Entries in DE1073 (PID08)
Y = O - Omit address in DA and
directory
AU
Advanced to Directory Indicator
Valid Entries in DE1073 (PID08)
Y = Listing be advanced to publisher in
order to meet a book closing
AV
Street Address Directory
Valid Entries in DE1073 (PID08)
Y = O - Omit listing from street directory
AW
Direct Mail List
Valid Entries in DE1073 (PID08)
Y = O - Omit from direct mail lists
AX
No Solicitation Indicator
Valid Entries in DE1073 (PID08)
AG
AH
Network Interface Device Request
Valid Entries in DE1073 (PID08)
Y = Network Interface Device
Requested
N = Network Interface Device not
Request.
Coordinated Hot Cut
Valid Entries in DE1073 (PID08)
Y = CHC is Requested
N = CHC is not Requested
AI
Pair Gain
Valid Entries in DE1073 (PID08)
Y = Pair Gain used for this Request
N = Pair Gain not used for this Request
AJ
CENTREX Services
Valid Entries in DE1073
Y = Dial 9 for outside line
N = Don’t dial 9 for outside line
AK
Loop out of range
Valid Entries in DE1073 (PID08)
Y = Loop is out of Range
N = Loop is not out of Range
AL
Network Interface Device Reuse
Valid Entries in DE1073 (PID08)
Y = Reuse Network Interface Device
N = Do not reuse Network Interface
Device
AM
Jack Request
Valid Entries in DE1073 (PID08)
Y = Jack is Requested
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE751 Code
Y = Print indicator (Causes an
identifying mark to be shown in the
directory
AY
Telemarketing
Valid Entries in DE1073 (PID08)
Y = O – Omit from telemarketing lists
AZ
Dual Name Listing
Indicates listing contains multiple first
names.
Valid Entries in DE1073 (PID08)
Y = Dual Names are Listed
N = No Dual Names are Listed
BA
Professional Identifier
Indicates that this a professional listing.
Valid Entries in DE1073 (PID08)
Y = Professional Identifier is Used
N = Professional Identifier is not Used
BB
Sequence Merge
Valid Entries in DE1073 (PID08)
Y = Merge across customers
N = Do not merge between customers
BC
BD
BE
BF
Ten Digit Trigger
Indicates the activation of a ten digit
trigger for local routing associated with
number portability.
Valid Entries in DE1073 (PID08)
Y = Ten Digit Trigger Activated
Zero Logic
Identifies if the customer's frame relay
customer premises equipment (CPE) is
unable to support B8ZS.
Valid Entries in DE1073 (PID08)
Y = CPE Supports B8ZS
N = CPE does not Support B8ZS
End User Form
Indicates which additional forms are
being submitted with this request.
Valid Entries in DE1073 (PID08)
Y = End User Form is Used
N = End User Form is not Used
Directory Assistance
Indicates which additional forms are
being submitted with this request.
Valid Entries in DE1073 (PID08)
Y = DA Form is Used
N = DA Form is not Used
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE751 Code
BG
Directory Listings
Indicates which additional forms are
being submitted with this request.
Valid Entries in DE1073 (PID08)
Y = DL Form is Used
N = DL Form is not Used
BH
Directory Listing/Assistance
Indicates which additional forms are
being submitted with this request.
Valid Entries in DE1073 (PID08)
Y = DL/DA Forms are Used
N = DL/DA Forms are not Used
BI
Final Bill Information Indicator
Indicates whether a final bill should be
sent to either the existing billing address
or a different address.
Valid Entries in DE 1073 (PID08)
Y = Different (D)
N = Existing (E)
BJ
Operator Assisted Routing
Identifies a requirement for custom
routing of 0+ Local, 0-, 411, 555-1212
calls.
Valid Entries in DE 1073 (PID08)
Y = Customized Routing
BK
Station Messaging Detail Recording
Identifies that the SMDR call detail
recording system is actuated on all calls
placed by station users.
Valid Entries in DE 1073 (PID08)
Y = Yes, if SMDR is used
BL
PBX Trunk Type
Identifies the type of PBX trunk being
ordered
Valid Entries in DE 1073 (PID08)
Y = C (Custom)
BM
Additional Field Visit Required
Identifies if a field visit is required at the
customer/end user location, which
requires arrangements to be
established.
Valid Entries in DE 1073 (PID08)
Y = Yes
BN
Negotiated Rate Indicator
Identifies the rates that are to be applied
to the service(s) being ordered..
Valid Entries in DE 1073 (PID08)
Y = Negotiated Rates Apply
EDI GUIDELINE
GENERAL SECTION
CODE
BO
BP
DESCRIPTION of DE751 Code
Hunt Group Restriction
Indicates the number(s) requested are
not available for hunting due to technical
restrictions.
Valid Entries in DE 1073 (PID08)
Y = Yes
End User Retain Listing
Indicates whether an end user’s
directory and/or directory assistance
listing should be retained or not
retained.
NOTE: As of LSOG6 the valid OBF
values have been expanded. The
valid value conversion for Y and N
will not be used after ELMS5.
Beginning with ELMS6 valid OBF
values are passed unconverted in
PID05.
ELMS5 and Prior:
Valid Entries in DE 1073 (PID08):
Y = Retain End User Listings for this
Account “as is” in both Directory
and/or Directory Assistance
N = Do Not Retain Listing
ELMS6 and After:
Valid entries in DE352 (PID05):
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for
a list of these valid values.
BR
BS
BT
Graceful Discard
Indicates what the Frame Relay
Graceful Discard feature should be set
for.
Valid Entries in DE 1073 (PID08)
Y = A - Turn on
N = B - Turn off
Alternate Call Authorization
Indicates authorization has been
obtained to list the alternate number,
when the requester is not the LSP
owning the telephone listing.
Valid Entries in DE 1073 (PID08)
Y = Alternate Call/Answering Service
Listing is authorized
Failed Test
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE751 Code
Identifies a failed MLT test with a central
office.
Valid Entries in DE 1073 (PID08)
Y = Yes (MLT test failed)
BU
Hunt Group Information
Identifies that the Hunt Group
Information is present in the Local
Service Request .
Valid Entries in DE 1073 (PID08)
Y = Hunt Group Information is Used
BV
Quick Dial Tone Indicator
Identifies whether or not a location has
an available Quick Dial Tone (QDT) line.
Valid Entries in DE 1073 (PID08)
Y = Yes (QDT is available)
N = No (QDT is not available)
BX
Range Extender Indicator
Indicates the presence of a range
extender on the loop.
Valid entries in DE1073 (PID08)
Y=Range Extender is Present
BY
Remote Terminal ADSL Available
Indicates that the Remote Terminal
serving the entire distribution area and
all the serving area interfaces will have
ADSL available.
Valid Entries for DE1073 (PID08)
Y=Indicates remote terminal has ADSL
available
BZ
Pooling Status
Identifies the pooling status of a
Working Telephone Number (WTN).
Valid Entries in DE1073 (PID08)
Y=WTN is pooled
N=WTN is not pooled
CA
Different Premises Address Indicator
Identifies if the installation address is
different from the listing address for at
least one TN on this order.
Valid Entries in DE1073 (PID08)
Y=Installation address is different from
the Listing Address for at least one
TN
N=Installation address is not different
from the Listing Address
CB
Construction Required Indicator
Identifies whether or not construction is
required for this inquiry.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE751 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Valid Entries in DE1073 (PID08)
Y=Construction is required
N=Construction is not required
CD
CE
CF
CG
CH
CI
CJ
Owned Wiring Indicator
Identifies if the inside wiring of the
validation address is owned by the end
user.
Valid Entries in DE1073 (PID08)
Y=Inside Wiring is owned by the end
user
N=Inside Wiring is not owned by the end
user
Do Not Omit Indicator
Identifies if the publisher should ignore
the normal print-suppression of "ST"
(Street).
Valid Entries in DE1073
Y=Do no omit
Technician Working on Ticket
Indicates that a technician is currently
working on the ticket for this request.
Valid Entries in DE1073 (PID08)
Y=The technician is currently working on
it
N=The technician is not currently
working this order
Reuse Loop
Identifies the customer’s desire to reuse
the loop from an existing service
arrangement for this request.
Valid Entries in DE1073 (PID08)
Y = A – Yes
Alternate Network Serving Arrangement
Indicates that the customer is
requesting an arrangement that
allows end users who reside in areas
where the central office switch does not
support ISDN BRI to receive the service
from a neighboring central office.
Valid Entries in DE1073 (PID08)
Y = Yes
Display
Identifies display functionality on the
ISDN set.
Valid Entries in DE1073 (PID08)
Y = Yes
Voice Repeater Presence
Identifies the presence of analog central
December 2014
DESCRIPTION of DE751 Code
office voice repeaters on the loop.
Valid Entries in DE 1073 (PID08)
Y = Yes
N= No
CK
Data Repeater Presence
Identifies the presence of data
repeaters on the loop.
Valid Entries in DE 1073 (PID08)
Y = Yes
N= No
CL
Digital Route Index
Identifies the ISDN PRI route index as
digital data only.
Valid Entries in DE1073 (PID08)
Y = Yes
CM
Conversion In Progress Indicator
Indicates that conversion is in progress
and CSR has not been updated.
Valid Entries in DE1073 (PID08)
Y = Yes
CN
Order Change Indicator
Indicates if any service order details
have changed between Pending
Service Order Notices.
Valid Entries in DE1073 (PID08)
Y = Yes
CO
Pending Order
Identifies if a pending order has been
assigned to the PON.
Valid entries in DE1073 (PID08)
Y = Yes
CP
Diversity Indicator
Indicates that there is an alternate
transmission route.
Valid entries in DE1073 (PID08)
Y = Yes
CQ
English USOC Description Indicator
Identifies that a description of a USOC
will be required
Valid entries in DE1073 (PID08)
Y = Yes
CR
USOC Description Available Indicator
Identifies that USOC descriptions are
not available for the account
Valid entries in DE1073 (PID08)
N = No
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE751 Code
CS
MUX Status
Identifies that a MUX (Multiplexer) is
available for the facilities that have
been queried.
Valid entries in DE1073 (PID08)
Y = MUX Available
N = MUX Not Available
CT
Integrated Switched Digital Network
(ISDN) Indicator
Identifies that the facilities queried can
support ISDN.
Valid entries in DE1073 (PID08)
Y = ISDN Capable
N = Not ISDN Capable
CU
Switched Net 56 Indicator
Identifies that the facilities queried can
support Switched Net 56.
Valid entries in DE1073 (PID08)
Y = Switched Net 56 Capable
N = Not Switched Net 56 Capable
CV
64K Clear Channel Indicator
Identifies that the facilities queried can
support 64K Clear Channel service.
Valid entries in DE1073 (PID08)
Y = 64kbps Clear Channel Capable
N = Not 64kbps Clear Channel Capable
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DA
DB
DC
CW
CX
CY
X75 Packet Service Indicator
Identifies that the facilities queried can
support X.75 Packet Service.
Valid entries in DE1073 (PID08)
Y = X.75 Capable
N = Not X.75 Capable
Re-Qualification
Indicates that an automatic requalification will be made if the initial
request did not qualify
Valid entries in DE1073 (PID08)
Y = Yes
N = No
Switch Supported
Identifies if a USOC feature is supported
by the switch.
Valid entries in DE1073 (PID08)
Y = Yes
U = Unknown
CZ
Integrated Digital Loop Carrier
December 2014
DD
DESCRIPTION of DE751 Code
Identifies if a working telephone number
is being served via integrated pair
gain/integrated digital loop carrier
(IDLC) or non-integrated on a Batch
Hot Cut Inquiry.
Valid Entries in DE 1073 (PID08)
Y = Yes
N= No
Easy Numbers
Identifies a TN for a vanity or custom
number.
Valid entries in DE1073 (PID08)
Y = Yes
Merger Indicator
A locally defined code to identify when
pending order activity exists on
a Customer Service Record but has not
been posted to the account.
Valid entries in DE1073 (PID08) are:
Y = Yes
N = No
Independent Company Indicator
Identifies that the specified address is
not within the local company territory.
Valid entries in DE1073 (PID08):
Y = Yes
N = No
FCI - Fiber Capability Indicator
Valid Entries in DE1073 (PID08)
Y=Yes
N=No
Product/Service formatted Codes used in PID04
CODE DESCRIPTION of DE751 Code
CMP Item Status of Complete
Indicates the status of an item.
OPT Barcode is Optional
Indicates the Barcode is optional.
Product/Service formatted instructions/details
to be used with PID05 Description
CODE DESCRIPTION of DE751 Code
800 800/WATS Instructions
Remarks which define or clarify
instructions for establishing
800/WATS service.
ACCTDES Account Descriptor
Locally defined code to indicate that
the CSR inquiry is on an active
account, but pending a disconnect.
EDI GUIDELINE
GENERAL SECTION
CODE DESCRIPTION of DE751 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE DESCRIPTION of DE751 Code
values.
ALA Alternate Loop Available
Indicates whether an alternate path
from the DLC to the host central
office is available.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
ARS Automatic Route Selection
Identification of the facilities involved
in a particular route and the
sequence in which these facilities are
accessed. contents are established
as part of a trading partner
agreement.
ASGNIND Assignment Indicator
Identifies an assigned or unassigned
circuit at a given address.
ASGTRSTN Assignment Restriction Code
Locally defined code to identify
restrictions against a specific CFA
(Connecting Facility Assignment).
BAI Billing Availability Indicator
Identifies for LIDB that the end user's
billing name and address is not
available to anyone other than the
current LSP, based on the end user's
request.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
BCOPT Batch Cut Option
A locally defined code that identifies
the process to be used for a batch
hot cut.
BSVC Bearer Service
Identifies the activated ISDN BRI B1
and B2 channels.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
December 2014
CCEA Cross Connect Equipment
Assignment
Identifies the physical point of
termination at a collection cage.
CFA Connecting Facility Assignment
Identifies the carrier system and
channel to be used.
CFAST CFA Status
Locally defined code to identify if
there is a conflict with the facilities
that have been queried.
DAT Display Attributes
Identifies the attribute that provisions
the display functionality on the ISDN
set.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
DLCTYPE DLC Type
Identifies the type of Digital Loop
Carrier (DLC) on the loop.
DSSCP DSSC Presence
Identifies the presence of Digital
Single Subscriber Carrier (DSSC) on
the loop.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
EXP Expedite Reason
Indicates the reason why an expedite
is requested.
FEATDES Feature Description
Description of feature codes, which
may include USOCs and FIDs.
FE Facility Environment
Identifies the type(s) of facilities
deployed in the geographic area
surrounding the end user location.
OBF maintains a list of valid values
EDI GUIDELINE
GENERAL SECTION
CODE DESCRIPTION of DE751 Code
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
FEP Facility Environment Provisioned
Identifies the type of facility serving
the end user location.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
FSQ Fiber Service Qualification
Identifies the status of the fiber
facilities serving the end user
location.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
ISR Installation Service Requested
Identifies that the customer is
requesting a provider technician to
assist the end user with installation
and configuration of on-site
equipment.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
ITYP ISDN Type
Identifies the ISDN set configuration.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
LCT Load Coil Type
Identifies the type of load coil(s)
present on the loop
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE DESCRIPTION of DE751 Code
LLT Loop Length Type
Identifies the process used to
determine the loop length.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
LM Loop Make-up Type
Identifies whether the loop
qualification inquiry/response is
based on the total length of the loop
or each loop segment/sub-segment.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
LPAC Loop Product Available Code
Identifies which products are
available for resale based on the loop
length
LSA Loop Speeds Available
Identifies the specific xDSL
downstream/upstream speeds that
are available
LTNE Listing Telephone Number
Environment
Identifies the service type associated
with the telephone number for this
listing
MEU Multiple End User Functions
Identifies the functions associated
with the existence of multiple end
user locations.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
MLT Mechanized Line Test
Identifies the status of the
mechanized line test.
NCDEF Network Channel Code Definition
Identifies a definition of the Network
Channel (NC) Code (e.g., CO
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE DESCRIPTION of DE751 Code
Multiplexing).
PCT Primary Rate Interface (PRI) Call
Type
Identifies the allowable call types for
the ISDN PRI.
OBF maintains a list of valid values
that may be used with this code. See
Local Service Ordering Guidelines
(LSOG) for a list of these values.
PGPRES Pair Gain/DLC Presence
OBF maintains a list of valid values
that may be used with this code. See
Local Service Ordering Guidelines
(LSOG) for a list of these values.
POTSSPLITLOC
Plain Old Telephone Service Splitter
Location
A locally defined code that indicates
cable connection point for location of
the POTS Splitter.
PPT Ported/Pooled Type
Indicates that the telephone number
has been internally ported or pooled.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
PROJIND Project Indicator
Identifies that the project is either a
customer or provider project.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE DESCRIPTION of DE751 Code
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
RSUIND Remote Switch Unit Indicator
Identifies that the loop originates from
a Remote Switch Unit.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
RTF Receive/Transmit Indicator
Identifies if a pair is used to support
the receive or transmit side of a 4wire service.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
SCFA Secondary Connecting Facility
Assignment
Identifies the provider carrier system
and channel to be used from a wide
band analog or a high capacity facility
for a through-connect configuration.
SSC Single Subscriber Carrier Indicator
Identifies that two circuits are
associated with the physical loop and
the applicable connecting device.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
STATUS Status of Channel
QRYIND Query Indicator
Locally defined code to indicate the
selection criteria used on a query
(TN, ECCKT, address, etc.).
RP Ring Preference
Identifies the attribute associated with
the call appearance of the ISDN set.
December 2014
A locally defined code that identifies
the status of the channel.
TA Terminating Arrangement
Identifies that the ISDN/PRI is
provisioned using another service
type arrangement.
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE DESCRIPTION of DE751 Code
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
TAI Transaction Activity Indicator
Identifies the status of the service
order returned.
CODE
Product Change Notice Codes
(see DE751 for code list)
PHYCHAR
Physical Characteristics
(see DE751 for code list)
PRE-ADDRESS
Pre-ordering Address Response
code list (see DE1271 for code
list)
TNE Telephone Number Environment
Identifies the service type associated
with the telephone number(s) for this
request.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
TNT Test and Tag Requested
Identifies the customer is requesting
additional testing and tagging beyond
that which is included with the
product ordered.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
TTYP Terminal Type
Identifies the terminal associated with
the ISDN BRI.
OBF maintains a list of valid values
that may be used with this field. See
Local Service Ordering Guidelines
(LSOG) for a list of these valid
values.
822 Source Subqualifier
TYPE=AN MIN=1 MAX=15
A reference that indicates the table or text
maintained by the Source Qualifier.
CODE
AFCHAR
DESCRIPTION of DE822 Code
Affected Characteristics
(see DE751 for code list)
DESCRIPTION of DE822 Code
PCNSTAT
NOTE: This code and its
associated DE1271 codelist
should not be used with ELMS5
and later.
PRE-FRESP
Pre-ordering Feature/Service
Response code list (see
DE1271 for code list)
NOTE: This code and its
associated DE1271 codelist
should not be used with LSOG5
and later -- refer to DE 1000
code "FE", instead.
QR1
Activity Codes
(see DE751 for code list)
QR2
QA Sample Status Codes
(see DE751 for code list)
QR3
Chart Type
(see DE1271 for code list)
SO-RSQ
Service Order – Reseller
Questions list
(see DE751 for code list)
1000 Service Characteristics
Qualifier
TYPE=AN MIN=2 MAX=2
Code from an industry code list qualifying the type
of service characteristics.
(For three character codes, see Note 10 in
Appendix A)
CODE
0P
DESCRIPTION of DE1000 Code
Performance Credit Eligibility Indicator
Identifies the performance credit eligibility
status.
For CABS billing applications, see current
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
issue of CABS BOS Specifications for a
list of valid values.
1P
EGCS Valid DE234 values:
A
Establish New Account
C
Change an existing account, e.g.,
rearrangement, move, partial
disconnect or addition
D
Disconnect account in its entirety
DN
Deny/Non-Payment
H
Short Term Suspension
M
Inside move of physical
termination within a building
R
Record activity is for ordering
administrative changes
RP
Restore/Payment
RS
Restore Service
S
Reseller Assume
SD
Seasonal Disconnect
SS
Suspend Service
T
Relocate Service Location outside
V
Conversion of service as specified
W
Conversion as is
Specialized Transition Percent
Percentage applied to switched access
rate
2P
CMC/RCC Percent Originating Usage
Percentage used to bill cellular originating
usage
3P
Discount Rate Indicator
A code which denotes that a discount rate
is applied.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
4P
Non-Premium Percent
AB
Identifies the proportion of non-premium
flat-rated usage to be billed.
8P
POTS Translation Indicator
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Valid DE234 values:
A Added
B Baseline
C Assumed
AC
Virtual Features Indicator
Valid DE234 values:
B Both
C Customer
T Telecommunications Provider
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Account Activity Code
Automated Centralized Trunk Monitoring
Indicates that an automated service is
provided which monitors customer use of
specified central office loops for quality of
voice or data transmission and operational
performance.
A code that denotes the rate application
for 800 database vertical features.
AA
Contract Indicator
Indicates whether charge items were part
of original (baseline) contract or added to
the baseline contract.
A code that denotes the rate application
for 800 database POTS translation
queries.
8V
DESCRIPTION of DE1000 Code
AD
Address Activity
Indicates the activity of the work to be
performed at the account level.
An OBF value which indicates the address
activity.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
to all Interexchange Carriers.
AE
Account Code
AK
AF
A code which identifies the specific level of
apportionment detail.
Address Format Type
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
AG
PICC Apportionment Factor Application
Indicator
AL
AM
A code which identifies the Primary
Interexchange Carrier relationship as it
relates to Primary Interexchange Carrier
apportionment factor.
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
AN
AO
AP
Indicates whether a call was answered or
the reason that a call was not answered.
AJ
Primary Interexchange Carrier
Apportionment Factor
A factor used to apportion Non-PIC’d lines
December 2014
Provisioning Activity/Status
A code or phrase that identifies
provisioning activity or status of an item in
a service order.
Answer Indicator
Valid DE234 values:
0
Answered
1
Unanswered
3
Blocked due to Irregularity
4
NCP Blocked Before Answer
5
NCP Blocked After Answer
Access Number
A dialed number used to access a specific
telecommunications service.
Valid DE234 values:
1
Base PICd to Individual Carrier
2
Total PICd to All IXC
3
Total Non PICd
AI
Main/Alternate Telephone Number
An OBF value which indicates the dialable
Telephone Number(s) assigned to the
ISDN BRI (Integrated Services Digital
Network Basic Rate Interface) line.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Primary Interexchange Carrier
Apportionment ID
Alternative NPA NXX
Identifies an alternative NPA-NXX where
the feature/service is available
An indicator that denotes how the primary
interexchange carrier apportionment factor
is applied.
AH
ACNA/State Indicator
A customer selectable 2 - 12 digit code
entered when placing a call and captured
by the switch that appears on the
customer’s bill.
Translated Account Code/PIN/Department
ID
An alphanumeric descriptive translation of
the account code, PIN, or Department ID
that appears on the customer’s bill.
AQ
Type of Account
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
AR
Activity Indicator
A code that denotes posted activity to an
account since the last billing cycle.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
postal delivery or both. This only indicates
the validity of an address for a particular
delivery method and cannot be used to
request a specific delivery method. For a
list of Valid Values used with this code see
the current issue of OBF Local Service
Ordering Guidelines (LSOG).
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values. CABS BOS value
asterisk (*) will be presented as 'SOACT'.
Valid DE234 values:
SOACT Service Order Activity
AZ
AS
Valid DE234 values:
A Active
B Resolving Error
C Cancel
D Consolidated
F
Final
H Hold
P Pending
Q Order in approval process
R Reactivated
S Suspended
V Converted Service
Identifies the customer contact telephone
number when acceptance testing is
requested for ISDN or xDSL Capable
Loop.
A0
AX
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
A1
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Authorization Code
This code is verified in the switch to
authorize access to the network. Note this
is not the same as CD, a user defined
code not verified at the switch.
A2
Access Type
A3
Address Delivery Type
An OBF defined value that identifies an
address as being valid for hand delivery,
December 2014
Call Appearance
Identifies the call appearance(s) on the
ISDN set.
Identifies the access circuit type.
AY
Actual/Assumed Usage Indicator
A code that identifies usage as being
based upon actual recorded usage or
assumed usage.
Customer Access Treatment (CAT)
Valid DE234 values:
DD
Dedicated
IT
Interconnection Trunking
LA
Local
LI
Link
SP
Special
SW
Switched
Tandem Switching Charge Type Indicator
Identifies the type of tandem switching
charge being applied.
Identifies the access treatment code
assigned to a CENTREX station line.
AU
Acceptance Testing Request
Account Status
A EGCS defined code used to distinguish
the status of service at an account.
AT
DESCRIPTION of DE1000 Code
Translated Sub-Department ID
An alphanumeric descriptive translation of
Sub-Department ID that appears on the
customer’s bill.
A4
Admin ID
Identifies the customer administrator of the
MSO365 licenses and voice connection
seats.
BA
Band
Locally defined code to identify an area in
which a call/service terminates.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
BO
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
BB
BC
BD
BQ
BR
BS
Identifies a group of stations by customer
location for the application of billing rates.
BI
Assignable Binding Post
BT
Basic Service Type
Locally defined code which identifies the
basic service type for the account. This
may be the Basic Class of Service USOC.
Bridging Location Code
BU
Identifies the central office that provides
bridging for multi-point services.
BN
Billing Structure Code
A locally defined code that identifies the
billing structure for an account or type of
billing detail within an account.
Identifies the binding post associated with
a fiber channel used to support the end
user.
BL
Directory Listings Type of Account
An OBF value that identifies the type of
account for a directory listing which
determines the placement in split
directories and directory assistance. For a
list of Valid Values used with this code see
the current issue of OBF Local Service
Ordering Guidelines (LSOG).
Excess Burst Size
Location Billing Group
Supplemental BIP (Border Interconnection
Percentage)
A Meet Point Billing percentage applied to
fixed charges.
Identifies the maximum amount of data
that a user is permitted to offer to the
network that exceeds Bc during time
interval (Tc) across the circuit.
BG
BIP (Border Interconnection Percentage)
The percentage of a specific rate element
that is to be billed by a given exchange
carrier or to be rated under a given
jurisdiction's tariff on a multiple jurisdiction
account.
Primary B/D Channel Configuration
A 7 digit alpha/numeric code that identifies
the ISDN PRI (Primary) B and D channel
configuration per DS-1.
BE
BP
Committed Burst Size
Identifies the maximum amount of data
that a user is permitted to offer to the
network during time interval (Tc) across
the circuit.
Business/Residence Placement Override
An OBF value that identifies an override of
the normal placement of a business or
residence listings. For a list of Valid
Values used with this code see the current
issue of OBF Local Service Ordering
Guidelines (LSOG).
Blocking Activity
An OBF value which identifies the blocking
activity. For a list of Valid Values used with
this code see the current issue of OBF
Local Service Ordering Guidelines
(LSOG).
DESCRIPTION of DE1000 Code
The primary/originating data services
network address/user ID in a transmission,
which incurs charges.
Billing Telephone Number
Identifying number to which charges are
directed. This number may incur its own
charges.
December 2014
Billed Network Address/User ID
BW
Bandwidth
Identifies the number of bands used in
conjunction with multi-bandwidth services.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
O
BZ
Informational Only
BIP Source Indicator
CG
Contract Category Code
A code that denotes the source of the BIP.
A locally defined code to identify a
contract category not a specific contract
number.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
CH
CA
A code indicating whether the charge is
current, revised or other.
A EGCS defined code indicating if carrier
access line charges apply.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Valid DE234 values:
0
Access charges do not apply
1
Access charges apply
3
Ratchet Factor
CB
Valid DE234 values:
00 Zero Rated
01 Current
02 Revised
03 Rate Change
04 Free Item
05 Order Activity Charge
06 Prior to Rate Change
07 After Rate Change
08 Previous
09 Variable Rate
CENTREX Common Block Identifier
Identifies the name/number of the
CENTREX and the name/number of the
grouping (Customer Common Block).
CC
Calling Card Number
Identifies the card number(s) assigned by
the telecommunications provider.
CHC
CD
Customer Dialed Acct. Recording/Subauthorization Number
Cellular Air time Package Code
A code that uniquely identifies the
schedule of air time usage charges for a
customer's cellular calls.
CF
CI
CJ
Used to determine if the TCD amount is
included in the SLN. Use of this code is
temporary and will go away with ANSI
ASC X12 Release 003021 when DE662 is
added to TCD.
December 2014
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Circuit Drop Location Code
A code to identify a specific customer
location for a service item, circuit or data
link connection identifier (DLCI).
Configuration Code
(See Note 2 in Appendix A)
Valid DE234 values:
I
TCD value is included in the SLN
if it is a child of the SLN. If not, it is
included in the IT1.
Coordinated Hot Cut
Identifies that the customer is requesting
near seamless cutover activity.
A numeric code of 1/8 digits assigned by
the customer at the time the call is placed.
CE
Charge/Usage Status Code
Carrier Access Line Charge Code
Treatment Code Activity
Indicates the activity type for the treatment
code associated with the CENTREX
Common Block.
Valid DE 234 values:
D Disconnect
N Add/Install
CK
Circuit Location Code
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
A customer defined code to identify the
circuit location.
CL
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
CPG
Class of Service Code
CQ
A EGCS defined code to identify the class
of service for this account.
Valid DE234 values:
B Business
C Coin
E ESSX/CENTREX
F
Flat Rate Residence
G Government
M Measured Rate Residence
O Other
R Residence
CM
CMA
CN
CR
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Circuit Number Identification Code
Identifies the call pickup group to which
this line is to be assigned.
CENTREX Multi-Group Number
Calling Card Restriction
This element identifies the type of
restrictions associated with a calling card.
CS
Circuit Signaling Condition
Indicates the type of conditioning
necessary to elevate transmission quality
within specific parameters set for the
circuit.
CT
Common Language Segment Number
(SFN)
A locally defined code to identify the
individual segments (Sections / Legs) of a
multi-point circuit for access services,
special services, or telephone lines.
Commingling Arrangement
Identifies the billing configuration in a
commingled service arrangement for
same bandwidth segments.
Call Pickup Group
This element identifies a grouping of
CENTREX stations for a Secondary
Location Address (SLA).
Local Service Providers Circuit Number
Identifies the circuit number assigned by
the Local Service Provider. May also be
used by the customer as a cross reference
to the provider's circuit ID(s) and in many
cases to identify the customer's end-toend service.
DESCRIPTION of DE1000 Code
CU
Channel Pair Identifier
The channel of a hi-cap facility used for a
switched access service.
CV
Cable Type Indicator
Identifies the configuration of the facility
connection assignment.
Identification code for the circuit number.
CO
A locally defined code to identify the
Central office serving the account.
Usually the 3-digit code known as Prefix in
a dialed telephone number. Could be NXX
of NPA Plan.
CP
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Central Office Exchange Code
CW
Identifies the circuit identification that was
previously provided to the old LSP/NSPSwitch by the NSP-Loop.
Channel Type
Indicates the channel type as specified in
the telecommunications provider's tariff,
which is utilized in providing data services.
December 2014
Out Exchange Company Circuit ID
CX
CENTREX Location Address Code
A locally defined code that identifies a
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
location address for the CENTREX
equipment. The address may identify a
customer, or company address.
number in a directory listing caption
header or SLU header.
C5
CY
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Identifies the telephone number of the
indent line that is followed by a sequence
override
C6
C7
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Circuit Switched Data Configuration
C8
C2
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Channel Number
Identifies the specific channel number on
a circuit that the customer is requesting to
use.
C9
Call Forwarding Telephone Number
Header Telephone Number
Identifies the telephone number on level 0
for a directory listing caption header or
SLU header.
C4
Circuit Switched Data
Identifies the number of ISDN BRI B
channels available for data.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Indicates the telephone number to which
calls will be directed for Interim Number
Portability.
C3
Circuit Switched Voice Configuration
Identifies which B channel will be used for
voice.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
C1
Circuit Switched Voice
Identifies the number of B channels
available for voice per user profile.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Identifies the quantity of ISDN BRI B
channels which will allow or deny access
to an individual ISDN user.
File After Non-Standard Telephone
Number
Identifies the non-standard telephone
number of the indent line that is followed
by a sequence override.
Cellular Usage Indicator
A code used to identify cellular usage and
separate cellular usage type.
C0
Sequence Telephone Number
Type of Cable
Identifies the type of cable associated with
the loop or loop segment.
CZ
DESCRIPTION of DE1000 Code
Header Non-Standard Telephone Number
Identifies the non-standard telephone
December 2014
DA
Directory Assistance Category Code
A EGCS defined code to identify the type
of directory assistance billing.
Valid DE234 values:
01 Local
02 Intrastate/Intraprovincial
03 Intrastate/IntraLATA
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Intrastate/InterLATA
Interstate/Interprovincial
Interstate/IntraLATA
Interstate/InterLATA
Corridor
411
555
Both 411 and 555 combined
International
Intrastate beyond service area
Interstate beyond service area
Intrastate Operator
Interstate, Canada and/or 809
Multi-Listing
Multi-Listing by appointment
Call Credit
Interstate Operator Handled
Information Call Completion
Intrastate Call Completion
Interstate Call Completion
Name/Address
InterLATA
555 National
411 National
555 Information Call Completion
411 Information Call Completion
555 Name/Address
411 Name/Address
Business Listing
555 Business Listing
411 Business Listing
Message Delivery
North America
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
item as originating or terminating.
Valid DE234 values:
C Combination of originating and
terminating
O Originating
T Terminating
LM Land to mobile
ML Mobile to Land
MM Mobile to mobile
DD
Digits Outpulsed
Number of digits forwarded.
DE
Primary/Originating Exchange Carrier
Circuit (ECCKT) Data Link Connection
Identifier (DLCI)
Identifies the near and logical primary
addresses of a Frame relay permanent
virtual circuit.
DF
Directory Subsection
Identifies the subsection of a directory in
which to place the listing.
DG
Degree of Indent
Identifies the degree of indentation for a
listing.
DH
DB
DESCRIPTION of DE1000 Code
Discount/Promo Application Code
Directory Book Code
Code to identify a type of discount or
special promotion application.
The Yellow Pages Publishing Association
(YPPA) Directory Publication code.
DI
SOURCE:
Publisher Contact List
AVAILABLE FROM:
Yellow Pages Publishing Association
Operations Group
820 Kirts Blvd - Suite 100
Troy, MI 48084
(248) 244-6200
(248) 244-0700 (Fax)
Department Code/Customer ID Code
A locally defined code to further identify
the charges and/or equipment by
customer defined category.
DJ
Sub-Departmental ID Code
Identifies specific groups or sub-groups
within the department identifier. Primarily
used by the customer, usually for billing
reference purposes.
INTERNET: www.yppa.org
DK
DC
Dialing
Direction Code
A EGCS defined code to distinguish the
December 2014
An OBF value which identifies CENTREX
dialing capability. For a list of Valid Values
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
used with this code see the current issue
of OBF Local Service Ordering Guidelines
(LSOG).
DL
DM
DR
DRT
DS
Directory Book Name
Locally defined code that identifies the
requested data rate at the time of turn-up
for digital loop requests.
Discount Planned Code
Dialed Telephone Number
The dialed telephone number associated
with a call when different than the
To/Terminating Number.
DU
Directory Caption Header Status
Directory Order Status
Identifies whether it is a new header or a
recap of an existing header, which is
supplied to define placement within the
caption set.
Identifies the status of the directory order.
Different Premises Address/Location Code
Identifies the customer location when
services are provided at a location
different than that of the primary service,
e.g., a PBX off-premises extension.
DQ
Data Rate Testing
Do Not Abbreviate
DT
DP
DRT
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
An OBF value that indicates data in
supplied fields must not be abbreviated.
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
DOS
Reason for Disconnect
Locally defined code to identify the
discount plan.
The name of the Directory Book that is
used when the Yellow Page Publishing
Association code is not available.
DO
Disaster Recovery
Extended Connectivity Option
Global Permanent Virtual Circuit
Global Port
Location
Permanent Virtual Circuit
Unbundled Local Switching (Port)
Unknown
Locally defined code that identifies the
reason for disconnecting service.
Dialable Station Number
Identifies the dialable 1 - 7 digit Station
Digit Dialing number.
DN
DRC
ECO
GPV
GPT
LOC
PVC
PRT
UKN
Delivered Line Speed
This code defines the line speed to be
delivered to the customer at the interface
point. This code is used only when the
requested line speed, i.e., the raw
bandwidth provided by the carrier is
different than the line speed required by
the customers application. The unit of
measure will always be in bits per second
(BPS).
DESCRIPTION of DE1000 Code
Data Service Classification
Valid DE234 values:
E Existing
N New
DV
Code identifying the Data Services.
Valid DE234 values:
ACC
Frame Relay Access
APT
Access Port
CNM Customer Network Management
Service
DLC
Data Link Connection Identifier
December 2014
Diversity from Circuit Number
This code specifies that the circuit being
ordered should be provisioned such that
its path does not coincide with the path of
another (new or existing) circuit.
DW
Detect Number
Identifies the customer assigned
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
telephone number associated with this
loop request.
DX
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
D3
D4
D5
Indicates which PIN on the Data Unit
enables or disables the loop back testing
capability.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
D6
Valid DE234 values:
I
Include
X Exclude
D7
D8
D2
D9
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EC
Exception Character
A locally defined field that identifies any
specific digits that are to be bypassed in
assigning a telephone number.
Data Set Options - Delete
December 2014
Disabilities Indicator
Identifies for LIDB that the end user has a
disability that requires special handling of
operator-assisted and/or directoryassistance calls.
Data Set Options - Add
Indicates the options to be deleted from a
data set ordered by the customer or
presently installed on the data line.
Distinctive Ring Telephone Number
Identifies the additional telephone
number(s) associated with unique ringing.
Disassociated Telephone Number
Indicates the options to be added to a
data set ordered by the customer or
presently installed on the data line.
Multiple Data Mounting Address Code
Specifies the address of a multiple data
set mounting device or modem pooling
address.
Identifies the telephone number that is
disassociated from the DID telephone
number range.
D1
Data Unit Loop Back Test Options
Indicates Loop back test options on data
unit interface.
Directory Advertising Category Code
Valid DE234 values:
01 DA Issue Billing
10 DA Monthly Billing
15 DA Adjustment
20 Credit/Debit
25 DA Sales
30 Increase in DA
35 Decrease in DA
D0
Data Unit PIN Connector Set-Up
Disassociated Telephone Number Action
Identifies the activity involved against the
disassociated telephone number.
DZ
Data Unit Interface Functions
Indicates Data Unit Interface function
conventions; such as EIA (Electronics
Industry Assn.) Interface conventions.
Valid DE234 values:
01 Yellow Pages
02 White Pages
DY
Data Terminal Address Identity
Indicates the customer provided identifier
for a data channel terminal unit.
Directory Book Type
A EGCS-maintained code to determine
type of directory book.
DESCRIPTION of DE1000 Code
ED
Disconnect ECCKT
Identifies the ECCKT to be disconnected.
EDI GUIDELINE
GENERAL SECTION
CODE
EJ
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Easy Word Justification
Code identifying the activity detail that will
occur only at the end user account level.
Identifies the justification of the EWORD
field.
EK
Electronic Key Telephone Set
EZ
Identifies the terminal set associated with
the national ISDN.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EM
EO
FA
Electronic Mail Category Code
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Earning Number
FB
Identifies the condition of the existing
facility(s) as assembled in the field.
EO Service or Equipment Indicator
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
FC
Feature Data
Primary/Originating ECCKT ID
This code is used to pass data associated
with Service Feature/Option code,
DE1000 code SF or SC.
The exchange carrier circuit ID used for
billing purposes.
Secondary/Terminating ECCKT ID
FE
Feature/Service Status
The exchange carrier circuit ID used for
billing purposes.
Indicates Pre-ordering Feature/Service
Response Code List.
Electronic Serial Number
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Identifies the electronic serial number or a
part of the serial number associated with a
specific cellular telephone.
FF
EUA
Facility Complement Code
This code is used to identify the prepaid
facility through which the service will be
provided.
FD
ET
Assembled Facilities Status
An identifying number that can actually
incur charges.
For a list of Valid Values used with this
code refer to the Telcordia Technologies
document SR-4111, Originating Line
Number Screening (OLNS) Planning and
Implementation Guide.
ES
Facility Charge Type Indicator
Identifies the type of access facility
charges being billed on a facility access
account.
Identifies the type of service/equipment
associated with the line in the Line
Information Database (LIDB).
EP
Valid DE234 values:
ADET Activity Detail
Easy Word to Find
Allows a selection of TN's that consist of
letters and numbers that make up a word.
A locally defined code identifying the
category for the Electronic Mail service.
EN
DESCRIPTION of DE1000 Code
Transfer Of Calls From Number
End User Activity
This is the disconnected telephone
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
number from which calls are being
transferred.
FI
Facility Interface Code
used for disaster recovery and diversity
planning.
FS
Identifies the Facility Interface Code (FIC)
for Customer Premises Equipment (CPE)
which translates to the Network Channel
Interface.
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
FO
Identifies the name of the Foreign
Township used to determine the
Telephone Directory that the customer’s
listing should be placed. It is normally
used for Customers with multiple listings.
FW
A code that denotes whether pricing
flexibility rates were applied.
Telephone number from which the call
originated.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Firm Order Confirmation Indicator
FX
Link Management Protocol
Valid DE234 values:
1
LMI
2
Annex A
3
Annex B
4
Auto
5
Other (e.g., RLMI version)
6
None
Tariff Status
A locally defined field used to provide
current status of the service abbreviation
in the tariff.
FR
Fiber Ring Identifier
A locally defined code used to specify the
Fiber Ring Name to which requested
service should be connected. This is also
December 2014
Pricing Flex Band
A locally defined code which identifies the
pricing flexibility band or area.
FY
Identifies the Virtual Connection (VC)
status for signaling protocol.
FQ
Pricing Flex Indicator
From/Originating Station Telephone
Number
A locally defined code that indicates the
status of the Firm Order Confirmation
(FOC).
FP
Foreign Township
Foreign Language Indicator
Identifies the foreign language preference
associated with the line number.
FN
Foreign Serving Office (FSO)
A locally defined code identifying the
switching central office unit. Usually
represented in NPA-NXX format.
FT
FL
DESCRIPTION of DE1000 Code
Pricing Flex Band – 2
A locally defined code which identifies the
second pricing flexibility band or area.
FZ
Freeze PIC Indicator.
Indicates the customer’s desired freeze
option for the PIC.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EGCS Valid DE234 values:
A Freeze LSP’s IntraLATA PIC
B Freeze LSP’s Inter & IntraLATA
PIC
E Freeze LSP’s InterLATA PIC
J
Freeze LSP End User Customer’s
InterLATA PIC
K Freeze LSP End User Customer’s
IntraLATA PIC
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
L
R
S
T
F1
Freeze LSP End User Customer’s
Inter & IntraLATA PICs
Remove InterLATA-Freeze
Remove IntraLATA-Freeze
Remove Inter & IntraLATA
Freezes
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
used with this code see the current issue
of OBF Local Service Ordering Guidelines
(LSOG).
GC
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Facility Type
A code that describes a type of facility
when it is other than a single baseband
channel on cable.
GL
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Location A
A standardized code that uniquely
identifies the location of facility terminal A,
which has the lower in alpha/numeric
sequence of two facility location codes in a
connecting facility arrangement.
GN
GR
Dialing Plan Group
Location Z
A standardized code that uniquely
identifies the location of facility terminal Z,
which has the higher in alpha/numeric
sequence of two facility location codes in a
connecting facility arrangement.
Identifies the dialing plan name for a
specific CENTREX.
GS
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
General Exchange Tariff Options Billing
Telephone Number (GBTN)
GT
An OBF value which identifies the Billing
Telephone Number or Billing Account
Number for charges associated with
options such as inside wire time and
material charges. For a list of Valid Values
December 2014
Terminal Group Station Restriction
Identifies the CENTREX station restriction
assigned to a station line.
See Telcordia Technologies practice BR795-100-100 for a list of valid values to be
used in DE234.
GB
Global Circuit Number
A locally service provider defined value
that identifies a global circuit. A global
circuit is comprised of one or more circuits
(DE1000 = CN) from one or more service
providers.
See Telcordia Technologies practice BR795-100-100 for a list of valid values to be
used in DE234.
F4
Glare
Identifies who will yield in a call contention
situation.
See Telcordia Technologies practice BR795-450-100 for a list of valid values to be
used in DE234.
F3
Terminal Configuration Group Name
Identifies a group of features selected by
the customer and is applicable only when
a feature key button is activated on the
ISDN set.
Facility Designation
A code that, for a specific type of facility,
uniquely identifies a path between two
network nodes.
F2
DESCRIPTION of DE1000 Code
Pair Gain Type
Identifies the actual type of pair gain when
present.
HC
Hotel Commission Flag
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
IE
This code indicates whether the toll
message is included in the calculation of
hotel commission.
Valid DE234 values:
01 Included
HG
HT
IF
Installation Disconnect Code
IG
EGCS Valid DE234 values:
I
Install
D Disconnect
B Both Install and Disconnect
Digits In
Hunting Telephone Number
Identifies the number of digits out-pulsed
from the end user equipment to the
providers central office.
Identifies a hunting number within a
hunting group.
IM
HY
This code specifies that on a customer
calling card order, interim cards are to be
used for the order. Additionally the interim
cards will be used with the same number
that will be assigned to the customer
cards.
Service Disconnect/Interruption Indicator.
Valid DE234 values:
Y Yes, issue interim card
N No, do not issue interim card
Identifies whether non-payment of a
charge item is service affecting.
IN
EGCS Valid DE 234 values:
DN Deny/Non-payment
IB
ID
IP
IQ
December 2014
Transaction Type
An OBF value which identifies the type of
transaction. For a list of Valid Values
used with this code see the current issue
of OBF Local Service Ordering Guidelines
(LSOG).
Terminal Group Name
Identifies the terminal group name used to
provision CENTREX-like lines.
Number Portability Type
An OBF value which identifies the type of
action to be taken when doing number
portability. For a list of Valid Values used
with this code see the practices dealing
with Number Portability in the current
issue of OBF Local Service Ordering
Guidelines (LSOG).
Interexchange Carrier Serving Office Code
A locally defined code to identify the
Interexchange Carrier central office
serving the account. May be a Common
Language Location Identifier (CLLI)
code.
International Card Number
This code identifies the international card
number(s) assigned by the
telecommunications provider.
ISDN Basic Rate Interface (BRI) Type
An OBF value that indicates the type of
National ISDN Basic Rate Interface (BRI).
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
IC
Interim Card
Hunt
An OBF value which indicates the type of
hunting being requested. For a list of Valid
Values used with this code see the current
issue of OBF Local Service Ordering
Guidelines (LSOG).
IA
Testing Indicator
Locally defined code to indicate the type
of testing requested.
Hunt Group Code
A code which identifies the hunt group
number on an account.
DESCRIPTION of DE1000 Code
IR
Transaction Activity
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
customer’s switch or the provider’s switch.
An OBF value which identifies the
transaction activity. For a list of Valid
Values used with this code See the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
IS
Sub-loop Indicator
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
I2
Identifies the type of sub-loop the
customer is requesting.
Identifies that the telephone number in the
OTN is served from either the customer’s
switch or the provider’s switch.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
IT
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Ported Telephone Number (s)
J5
Identifies the telephone number (s) that
is/are to be retained (ported) for Number
Portability.
IV
Inside Wire Type
KA
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
A locally defined code that identifies the
cable pair unit current activity status.
KB
Cable Pair Unit Pending Activity Status
A locally defined code that identifies the
cable pair unit pending activity status.
KF
KG
December 2014
Package
Indicates the ISDN BRI feature package
associated with this request.
KL
Last Unit
A locally defined code that identifies the
inter-office or tie cable last unit by number.
KP
Telephone Number Indicator
Identifies that the telephone number(s) in
the TNS field is served from either the
First Unit
A locally defined code that identifies the
inter-office or tie cable first unit by number.
Inside Wire Billing Account Telephone
Number
To identify the billing account telephone
number for the charges associated with
inside wire. For a list of Valid Values used
with this code see the current issue of
OBF Local Service Ordering Guidelines
(LSOG).
I1
Current Activity
Inside Wire Options
An OBF value which identifies the
requirements for inside wire services. For
a list of Valid Values used with this code
see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
IX
Demarcation Designation
Identification of the point where the
network provider terminates service at the
end user’s premises.
Identifies the type of inside wiring to be
used.
IW
Out Telephone Number Indicator (OTNI)
Plain Old Telephone Service Splitter
A locally defined code that identifies the
co-providers POTS splitter
KR
Inventory Status
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
A locally defined value that identifies the
status of the co-providers POTS splitter or
cable connection.
KS
K1
K7
Unit
Identification of the panel, shelf, or case
within the Network Provider’s central office
bay or cabinet.
K8
Slot Port
Identifies the specific connection port of
the slot to be used.
K9
Cross Box Identifier
Identifies the provider's cable to be
connected to the customer's terminal in a
field location.
DESCRIPTION of DE1000 Code
within the Network Provider’s central
office.
Cable Connection Type
A locally defined code that identifies which
cable connection type is being specified.
K0
CODE
Key System Number
Identifies the customer equipment, or
group of extensions, to which this item of
equipment is related.
KT
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Cable Identification 2
Identification of the second Network
Provider’s central office cable in response
to mechanization of line splitting.
LA
Local Access Transport Area (LATA)
Code
System ID
A code to identify a geographic area.
Identification of the Local Service
Provider’s system to be used in a colocation arrangement.
K2
K3
K4
SOURCE:
LATA Directory
Identification of the Network Provider’s
central office cable to be connected to the
Local Service Provider’s co-located
equipment.
AVAILABLE FROM:
Center for Communications Management
Information
11300 Rockville Pike, Suite 1100
Rockville, MD 20852-3030
1-888-ASK-CCMI (1-888-275-2264)
Shelf
INTERNET: www.ccmi.com
Number assigned to the Local Service
Provider’s shelf to be used in a co-location
arrangement.
ABSTRACT: CCMI's LATA Directory
shows area codes and exchange numbers
within each LATA across the U.S.,
including LATAs within states, numeric list
of LATAs, alphabetical list of LATA
names, rate center directory by LATA, and
LATAs by NPA and NXX. Updated twice a
year.
Cable Identification
Slot
Identification of the Local Service
Provider’s specific connection slot to be
used in a co-location arrangement.
LB
K5
An OBF value that identifies the activity
involved on a directory listing request. For
a list of valid values see the current issue
of OBF Local Service Ordering Guidelines
(LSOG).
Identification of the bay/cabinet in the
Network Provider’s central office.
K6
Listing Activity Indicator (LACT)
Relay Rack
Channel/Pair
Identification of the specific channel or pair
December 2014
LC
Library Code
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
charges.
A two position alphanumeric code that
references the Distance Dialing Reference
Guide (DDRG) Toll Library Directory as
defined in the Telcordia Technologies EMI
standard (SR-STS-000320).
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
LI
LD
A code used to indicate the portion of a
long duration call when the call spans
billing periods.
A locally defined code used to align the
customer service record.
LE
Listing Type
Valid DE234 values:
1
Initial Portion
2
Continuation Portion
3
Ending Portion
Identifies the type of directory listing being
submitted within the publication and
directory assistance (DA) rules.
LJ
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EGCS Valid DE234 values:
1
Listed, appears in DA & directory
2
Non-Listed, appears only in DA
3
Non-Pub, does not appear in
directory
4
Non Pub Emergency, does not
appear in directory, customer may
be contacted in an emergency
5
Non Pub Special, does not appear
in a directory, customer never
wants to be contacted
6
Omit DA, listing only appears in
the published directory
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
LK
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Location Routing Number (LRN)
Line Class Code
A number (NPA-NXX / NPA-NXX-XXXX)
used to uniquely identify a switch that has
ported numbers and is used to route a call
to the switch that owns the NPA-NXX
portion of the LRN.
LN
Listed Telephone Number
Listed Telephone Number DA
The telephone number as it appears on
the directory listing for the account.
Identifies the telephone number as it will
be given in directory assistance.
LO
LH
Loop Make-Up Status
Identifies the status of the loop make-up
returned.
Identifies functionality of the line as it
pertains to the type of switching
equipment. Used with CENTREX/ESSEX
services. For POTS, line class codes,
control routing for certain services.
LG
Local Transport Code
A code which identifies the type of traffic
to which local transport charges apply.
LM
LF
Long Duration Indicator
Low Speed Service Deriving Code (LSSD)
Late Payment Charge Applicability/Impact
Indicator
Identifies whether a debit adjustment
affects the calculation of late payment
December 2014
Local Exchange Carrier Serving Office
Code
A locally defined code identifying the Local
Exchange Carrier Central Office serving
the account. This code may be in
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
Common Language Location Identifier
(CLLI) format.
LP
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Indicates the provider’s NPA/NXX.
LY
Transmission Level Point
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
LPC Type
A code which identifies the type of late
payment charge.
LZ
Local Serving Office (LSO)
A locally defined code identifying the
central office unit associated with the wire
center that services the subscriber
premises. Usually represented in NPANXX format.
LT
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
L1
Indicates the type of circuit location.
LV
LW
L2
L3
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
A code that denotes whether the
associated usage is toll free within the
LATA.
LX
Local Exchange
December 2014
Local Calling Scope
Identifies the Local Calling Scope options
being requested.
LATA Wide Indicator
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Loop Status
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
LATA Wide Factor
Identifies the number by which the usage
rate has been multiplied for a LATA Wide
trunk group.
Spectrum Management Class
Spectrum Management Classes represent
the speed of data transmission and
whether the data is transmitted in a
symmetrical versus asymmetrical manner.
Classes are defined by T1E1.4.
Location Type
Valid DE234 values:
01 Master
02 Primary
03 Remote
04 Secondary
05 Alternate Master
Freeze Local Service Provider (LSP)
Identifies that the end user has requested
the option of prohibiting the change of
their current service provider or removing
the option.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
LS
Multipoint Leg Activity
Identifies the activity that is occurring on
this leg per this request.
Identifies the required transmission level
when a non-standard interface is required
at the primary/secondary location.
LQ
DESCRIPTION of DE1000 Code
L4
LPC Type Rate – Interstate
A code which indicates the type of late
payment charge rate applicable for the
interstate jurisdiction.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
06
07
MAC
L5
MB
Message/Rate Class
LPC Type Rate – Local
Indicates what method was used to place
the call.
A code which indicates the type of late
payment charge rate applicable for the
local jurisdiction.
Valid DE234 values:
AB Automated Billing Service (0+
Calling Card, Automated Collect
and Automated Third Number)
DS Dial station (Includes both
domestic and International Direct
Distance Dialing (DDD)
OC Operator Completed with Dial
Rate Applied
OS Operator Station
PC Person Call Back
PR Person
ST Station
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
LPC Type Rate
A code which denotes the type of late
payment charge rate applicable.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
MD
Miscellaneous Description
Digital Subscriber Line Class of Service
Locally defined text description to identify
components of itemized call charge. This
is a temporary code that should not be
used once the ITA segment is added to
the TCD loop.
Identifies the ISDN BRI line class of
service.
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
MA
Mail Box
Identifies a mailbox in which information is
stored and retrieved.
MC
L8
Missed Appointment Code
Identifies the provider’s code for the
missed appointment.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
L7
Part Charge
Credit miss-rated message
LPC Type Rate – Intrastate
A code which indicates the type of late
payment charge rate applicable for the
intrastate jurisdiction.
L6
DESCRIPTION of DE1000 Code
Special Message Adjustment Code
This code indicates that this is an
adjustment to a current/previous message
charge.
Valid DE234 values:
01 Adjusted cutoff (CTO)
02 Adjusted poor transmission (PRT)
03 Rebill
04 Rebill and credit applied
05 Message Credit
December 2014
ME
Multiple Charge Component
(See Note 4 in Appendix A)
A code used to qualify the multiple charge
component for itemized calls. This code is
temporary and should not be used after
the ITA segment is added to TCD loop.
Valid DE234 values:
01 Transfer State Tax
02 Other Line Charges – Mexican
Portion
03 Set Use Fee
04 Other Line Charges – Canadian
Portion
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
MF
Transfer Local Tax
Conference Surcharge
Authorization Code Surcharge
Type 1
Conversion Surcharge
High Capacity Surcharge
Queuing Surcharge
Intelligent Call Processing
Surcharge
Announcement Timer Surcharge
Alternate Termination Sequence
Surcharge
Alternate Destination Routing
Redirection Surcharge
Network Remote Access
Surcharge
Originating LEC Switched Access
Surcharge
Terminating LEC Switched
Access Surcharge
Announcement Surcharge
Authorization Code Surcharge
Type 2
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
information about the rating for a toll
message.
Valid DE234 values are:
01 Time and Charge Quoted
02 Indicates a Toll Message
Spanned Multiple Rate Periods
03 Pay Phone Non-Revenue Call
09 Postalized Rated Call
MJ
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
MK
Migration Indicator
ML
Valid DE234 values
UR Urgent
MN
Meet Point Billing Traffic Type
Identifies the type of account level activity
when lines/numbers are converting from
one LSP to another LSP.
A code that denotes the type of meet point
billing arrangement(s) applicable to the
traffic type.
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
MOU Apportionment
Month
Conveys the “month” in which a charge
was incurred
MI
Message Delivery
Identifies the message delivery service
that appears on the telephone bill.
MO
MH
Market Segment
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guideline (LSOG) for a
list of these values.
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
MG
Loop Modification Type
Identifies the loop changes involved in this
service request.
Primary Rate Interface (PRI) ISDN Method
Selection
Identifies the "B" channel selection
method used by the end user's equipment.
DESCRIPTION of DE1000 Code
Special Message Information Code
Qualifier
Indicates special and/or supplemental
December 2014
A code which identifies the percentage of
Total Minutes for Use in a state billed to a
given ACNA.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
EDI GUIDELINE
GENERAL SECTION
CODE
MP
DESCRIPTION of DE1000 Code
Meet Point Billing
Valid DE234 values are:
01 Multiple Bill
02 Combination Meet Point
03 Single Bill-Multiple Tariffs
04 Single Bill-Single Tariff
05 Single Bill-Pass Thru
06 Single Bill-Special Access
MQ
Meet Point Billing End Office
A code that denotes the type of meet point
billing arrangement(s) applicable at the
end office.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
MR
Transmission Medium Type
Identifies the specific medium or system
type supporting the loop segment.
OBF maintains a list of valid values that
may be used with this code. See the
Local Service Ordering Guidelines (LSOG)
for a list of these values.
MS
Special Message Discount Code
Locally defined code indicating that the
message is entitled to a special discount.
MT
Message Type
A EGCS maintained code identifying a
characteristic of a message in respect to
billing.
Valid DE234 values:
AB Automated Billing Service Third
Number
(See Note 2 in Appendix A)
AC Automated Billing Service Collect
(See Note 2 in Appendix A)
AD Automated Billing Service Calling
Card
(See Note 2 in Appendix A)
AH Attendant Handled
(See Note 2 in Appendix A)
AL Alternately Billed
AN ANI
(See Note 2 in Appendix A)
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
Collect – Person to Person
(See Note 2 in Appendix A)
CB Collect – Station to Station
(See Note 2 in Appendix A)
CC Calling Card
CD Domestic Calling Card
(See Note 2 in Appendix A)
CF Conference
(See Note 2 in Appendix A)
CL Collect
CP Coin Paid
CW Call Forward
(See Note 2 in Appendix A)
DO Direct Dialed – Operator Number
Identification
(See Note 2 in Appendix A)
FC Florida COCOT calls
(See Note 2 in Appendix A)
IA Intra-state
(See Note 2 in Appendix A)
IC International Calling Card calls
(See Note 2 in Appendix A)
IR Inter-state
(See Note 2 in Appendix A)
IT International calls
(See Note 2 in Appendix A)
LI Local Interrupt
(See Note 2 in Appendix A)
LV Local Verify
(See Note 2 in Appendix A)
MC Messenger Charge
(See Note 2 in Appendix A)
MO Mainland Originated
(See Note 2 in Appendix A)
NM Non-Mainland Originated
(See Note 2 in Appendix A)
OA Operator Assisted Conference
Call
(See Note 2 in Appendix A)
OC Operator Assisted Calling Card
(See Note 2 in Appendix A)
OD Operator Handled – Direct Dialed
Rate
(See Note 2 in Appendix A)
OH Operator Handled – Calling
Card/Person-to-Person
(See Note 2 in Appendix A)
OP Operator Assisted Person-toPerson
(See Note 2 in Appendix A)
OS Operator Assisted Station-toStation
(See Note 2 in Appendix A)
PR Person
(See Note 2 in Appendix A)
CA
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
PT
Prompter
(See Note 2 in Appendix A)
RP Receipt Paid
SA Sent Paid – Person to Person
(See Note 2 in Appendix A)
SC Special Collect
SP Sent Paid / DDD
ST Station
(See Note 2 in Appendix A)
TF Toll Free – Reverse Bill
TG Telegram
(See Note 2 in Appendix A)
TN Third Number
TP Operator Handled – 3rd Number
Person-to-Person
(See Note 2 in Appendix A)
WD WATS Message Detail
(See Note 2 in Appendix A)
MU
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
MZ
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
M0
OBF maintains a list of valid values that
may be used with this code. Se Local
Service Ordering Guideline (LSOG) for a
list of these values.
Maintenance Center
Minutes of Use (MOU) type
Valid DE234 values:
A Adjusted
R Recorded
TA Total Adjusted
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
M5A
Alternate F1 Disturber Type
Identifies the type of the alternate
disturber present in the feeder facility(ies).
Mid Span Percent
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
A percent used to bill the appropriate
amount of local channel charges for
Intrastate and Interstate jurisdictions on a
mid-span service.
M6
F1 Disturber Location
Mailbox Extension
Identifies the proximity of the disturber
within the feeder facility(ies).
The extension used to identify a specific
voice mailbox.
MY
F1 Disturber Type
Identifies the type of disturber present in
the feeder facility(ies).
A code which identifies minutes of use
quantity type when used in a calculation.
MX
F2 Loop Composition
Identifies the composition of the loop
material (serving technology type) of the
distribution facility(ies).
M5
MW
MUX Type
A code that denotes the type of
multiplexing charge applied.
Identifies the maintenance center
associated with the service order.
MV
DESCRIPTION of DE1000 Code
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Multi-Line Indicator
An indicator that distinguishes multi-line or
non multi-line (single) applicability.
M6A
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
December 2014
Alternate F1 Location
Identifies the proximity of the alternate
disturber within the feeder facility(ies).
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
M7
CODE
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
ND
NE
NF
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
NG
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
NH
NI
Nearby Telephone Number
Identifies the telephone number that may
be at or adjacent to the requested service
delivery location.
NC
Network Channel Interface Code
Indicates the electrical and physical
interface between the telecommunications
provider office and the customer location.
Updated codes can be obtained by
contacting ATIS at 202-628-6380 and
requesting A Technical Report on Carrier
to Customer Installation Interface
Connector Wiring Configuration Catalog.
Valid DE234 values:
E1 E.164
E2 DS1
NB
Telephone Number Change
Identifies the end user’s new telephone
number.
Network Addressing Method
Code Indicating the Network Addressing
method being used.
Network Point Indicator
A code that identifies at which point in the
network a charge is being assessed.
Identifies the proximity of the disturber
within the distribution facility(ies).
NA
Notification Type
Identifies the type of notification being
sent to the customer.
F2 Disturber Location
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Digital Services Network Assignment
Identifies the circuit number associated
with the ISDN BRI.
Identifies the type of disturber present in
the distribution facility(ies).
M9
Disconnect Number
Identifies the end user telephone number
to be disconnected in association with
unbundled services.
F2 Disturber Type
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
DESCRIPTION of DE1000 Code
provided by the exchange company
between two customer locations.
F1 Loop Composition
Identifies the composition of the loop
material (serving technology type) of the
feeder facility(ies).
M8
INDUSTRY CONVENTIONS
ASC X12 Version 004050
NJ
Secondary Network Channel Interface
Code (SECNCI)
Network Channel Code
Identifies the network channel code for the
circuit(s) involved. It describes the channel
December 2014
Identifies the electrical connotation on the
circuit at the secondary ACTL or primary
location.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
network subscriber.
NK
Network Path Indicator
NW
New Construction
Identifies network path rating points.
Identifies that the service address is a new
construction or a new location within an
existing service address.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
NP
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
North America Numbering Plan (NANP)
Code
Area Code.
NY
SOURCE: (X12 Code Source 719)
NANPA – North American Numbering
Plan Administration
Identifies how the disassociated telephone
number is to be used.
AVAILABLE FROM:
NANPA – North American Numbering
Plan Administration
46000 Center Oak Plaza, Building 10
Sterling, VA. 20166
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
N1
INTERNET: http://www.nanpa.com
ABSTRACT: Provides and maintains a list
of telecommunications carrier identification
codes which are used in the ordering and
billing of telecommunications services.
NQ
NS
Non-Standard Telephone Number
Identifies a telephone number that is not in
the North American Numbering Plan such
as, a vanity number, 911, or enterprise
numbers.
NT
Shared Line Telephone Number
Identifies the end user telephone
number(s) for line sharing.
NU
Network User Identification (NUI) Code
A locally defined code to identify the
December 2014
Primary Number
Identifies a shared telephone number
when the number in the TNS field will
appear as a secondary line on an ISDN
set.
N2
Number Portability Indicator
Identifies the status of the telephone
number being ported. For a list of Valid
Values used with this code see the current
issue of OBF Local Service Ordering
Guidelines (LSOG).
Disassociated Telephone Number Type
Data Telephone Number
Identifies the packet telephone number
associated with the ISDN.
N3
Data Out Telephone Number
Identifies the existing data telephone
number that is being changed.
OC
Other Charges and Credits Category
Code
A EGCS maintained code identifying the
basic category for this charge or credit.
Valid DE234 values:
(See Note 6 in Appendix A)
02 Annual Inventory
06 Out of Service
08 Miscellaneous Activity
12 Service Order Activity
14 Deposit Refund
16 Interest on deposit
18 Installment Billing
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
20
22
24
26
28
30
32
33
A
A01
A02
A03
A04
B
B01
B02
B03
B04
C
C01
C02
C03
C04
C05
C06
C07
D
D01
D02
D03
D04
D05
December 2014
Rate Change
Fractional
Fractional Credit
(See Note 4 in Appendix A)
Non-recurring
Non-recurring Credit
(See Note 4 in Appendix A)
Gift certificates
Installation
Change in Primary Interexchange
Carrier (PIC)
(See Note 5 in Appendix A)
Indicates an adjustment related
to partial month charges or
credits:
Adjustment related to partial
month charges or credits
Service billed before connection
Service Outage/Interruption
Suspension of Service
Indicates charges or credits
related to a change in rate:
Charge or credit related to rate
change
Carrier Access Line
Rate changed to discount rate
Border Interconnection
Percentage (BIP) Change
Indicates charges or credits
related to additions, changes,
or deletions in monthly
recurring events:
Addition, change or deletion
related to monthly recurring
events
Due to change in billing
Directory advertising
Promotional credit/discount/gift
Reversal of credit due to early
removal
Service discontinued by provider
Reversal of promotional credit
Indicates adjustments related to
previously billed events:
Adjustment related to previously
billed event
Directory advertising
Directory assistance
Error in billing rate
Tax
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
DESCRIPTION of DE1000 Code
D06
D07
D08
D09
D10
Surcharge
Late payment charge
Disputed amount
Transferred Billing
Charges/Payments
On discount
D11
D12
D13
D14
D15
Non-recurring credits or charges
Recurring Credits or Charges
Usage Sensitive
Additional Media/Report/Study
Equipment
E
E01
E02
E03
E04
E05
Indicates credits due to refund:
Refund
Interest
Deposit
Regulatory
Overbilling
F
Indicates charges or credits
due to banking transactions:
Charge or credit due to a banking
transaction
Dishonored check/electronic funds
transfer
F01
F02
G
G01
G02
G03
G04
G05
G06
H
H01
H02
H03
H04
H05
H06
H07
H08
H09
Indicates charges or credits
due to installment billing
transactions:
Charge or credit related to
installment billing
Construction installation
Transfer to a new number
Repair
Connection/equipment
Interest
Indicates charges or credits
due to non-recurring events:
Charge or credit related to nonrecurring event
Premises visit
Materials/equipment
Labor
Materials/equipment and labor
Central office connection
Processing/conversion/service
ordering
Installation/Establishment
/Activation
One-time Pre-subscribed
Interexchange Carrier (PIC)
activity
(See Note 7 in Appendix A)
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
H20
H21
H22
Additional media/report/study
Shipping/handling
Construction
Expedite
Change/rearrangement/removal
Usage sensitive
Gift of service/installation
Foreign directory
Discount on installation
Directory Advertising/Listing
Promotional Credit/Discount/Gift
Penalty
Tax
I
Indicates charges or credits
due to Pre-Subscribed
Interexchange Carrier (PIC)
activity
(See Note 8 in Appendix A):
Charge or credit related to Presubscribed Interexchange Carrier
activities
Disputed amounts
Carrier merger
No selection
Promotional Pre-subscribed
Interexchange Carrier change
I01
I02
I03
I04
I05
J
J01
J02
J03
J04
J05
J06
J07
OD
Indicates Charges or Credits
due to IntraLATA PreSubscribed Interexchange
Carrier (LPIC) Activity
Charge or Credit related to
IntraLATA Pre-Subscribed
Interexchange Carrier (LPIC)
Activity
Establishment
Change
Discontinue
No Selection
Assigned
Promotional Change
Other Charges and Credits Description
Code
A locally defined code to specifically
identify the type of charge or credit being
applied. This may be an OC&C phrase
code.
OE
Service Order Type
A locally defined value used to identify the
status of the order.
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
OF
DESCRIPTION of DE1000 Code
Retrieve Orders
Indicates search criteria for Posted
Orders.
OL
From/Originating Location
The originating location of a call or circuit.
OM
Originating/Terminating Rate Indicator
Identifies the rate applicable to originating
and terminating minutes of use.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
ON
Other Network User Address
The packet switching network user ID in a
transmission to which the usage charge is
not being applied.
OO
Outgoing Only Service Code (OGO)
An outgoing only service identifier
associated with a telephone number.
OP
Working Service On Premises
A code that indicates that there is a
working service at the end user location.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EGCS Valid DE234 values:
A Additional line requested
V Validate status of existing service
OR
Type of Engineer Order
To identify the various types of orders
issued on TEO’s.
Valid DE234 values:
EO
Engineer Only
EF
Engineer & Furnish
EFI
Engineer, Furnish & Install
EI
Engineer & Install
FI
Furnish & Install
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
FO
IO
Furnish Only
Install Only
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
PE
DESCRIPTION of DE1000 Code
Pulse Type
Type of pulsing on the type of trunk.
OS
Other Service Type
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
A locally defined code to identify the
service type associated with the other
Network User Address.
OT
Out Telephone Number
EGCS Valid DE234 values:
DP
Dial Pulse
MF
Multi Frequency
DTMF
Dual-tone Multi Frequency
Identifies the existing telephone number
that is being changed.
OW
PA
Type of Pulsing Outward
PF
Identifies the type of pulsing requested from
the provider to the customer.
A EGCS maintained code identifying a
Packet Switching Service Type.
OBF maintains a list of valid values which
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
Valid DE234 values:
DT Data Transport
FS Fast Select
HP Holding Time Premium
HS Holding Time Standard
PC Protocol Conversion
Primary/Originating Message Carrier
Identification
PG
A locally defined code which identifies a
third party service provider for billing.
PB
PICC Capacity Type Indicator Channels
Indicates the rating quantity which is
applied at the channel level when the
PICC is assessed.
Point Of Termination (POT) Bay Type
Identifies the location of the POT Bay and
who is responsible, ILEC or CLEC, for
installation and maintenance. For a list of
Valid Values used with this code see the
current issue of the OBF Local Service
Ordering Guidelines (LSOG).
PH
PICC Capacity Type Indicator Trunks
Indicates the rating quantity which is
applied at the trunk level when the PICC is
assessed.
PI
PC
Packet Switching Service Type
Pager Cap/Code
Proprietary Classification
Pager network identifier.
Indicates the type of an account’s
proprietary restrictions per the customer’s
request.
PD
PJ
Indicates the rating quantity which is
applied at the line level when the PICC is
assessed.
Number Portability Direction Indicator
Identifies the direction of wireless
conversion activity
PK
Previous Provider Telephone Number
Identifies the end user’s previous listed
telephone # if the user is changing
providers.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
PL
December 2014
PICC Capacity Type Indicator Lines
PBX Private Line Service Code
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
Identifies the service code of the PBX
private line ports required when
connecting private line service to
registered systems.
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
PS
PN
OBF maintains a list of valid values that
may be used with this code. See Local
Service Ordering Guidelines (LSOG) for a
list of these values.
PU
PV
Percent Available
Specifies the percent of a facility that is
available for ratcheting.
PW
Port Type
Identifies the type of unbundled port
ordered from the provider.
Packet Switch Port
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Major Product Code
Locally defined code to identify the type of
product to which the charges are grouped.
PR
Percent of Interstate Usage (PIU)
Specifies the percent of interstate traffic, a
physically intrastate circuit carries or is
capable of carrying.
Identifies the access port to the packet
switched network.
PQ
Pre-assigned Telephone Number
Indicates a new telephone number that is
assigned by the customer.
Provider Initiated Activity (PIA)
Indicates a provider initiated response that
is not a result of a customer Local Service
Request or supplement prior to
completion.
PP
PT
Personal Identification Number (PIN)
Identifies the Personal Identification
Number.
PO
Valid DE234 values:
CO Canada – Overseas
CU Canada – United States
DO Domestic
IA Intra-network
IL Intra-LATA
IO Inter-office
IP Intra-office
IR Inter-network
Pager Number
Telephone/Pin Number associated with a
pager.
Packet Switching Category Code
A EGCS defined code to identify the
package switched service category type.
Valid DE234 values:
OF Fully protected private line ports
ON Non-protected private line ports
OP Partially protected private line
ports
OX Ancillary Equipment
PM
DESCRIPTION of DE1000 Code
EGCS Valid DE234 Values:
L
Line Port
T Trunk Port
Protocol Type
PX
A code used by the customer to specify
the type of transmission protocol required.
Valid DE234 values:
X25
X.25
X400
X.400
ASYC
Asynchronous
SYNC
Synchronous
December 2014
Private Branch Exchange/CENTREX
Extension Number
The local extension number associated
with a PBX or CENTREX.
PY
PICC Application Indicator
Indicates the type of PICC being applied.
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
PZ
A locally defined code related to packet
switching that identifies the type of access
(dialed, dedicated) and access protocols
of the connected originating end users.
PICC CENTREX Indicator
P6
Identifies the CENTREX line formula used
in the assessment of PICC.
P7
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
A locally defined code related to packet
switching that identifies the type of access
arrangement at the originating network.
P8
P9
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Remote Sensor Identification Code
QC
Originating Data Network ID Code
QD
A locally defined code related to packet
switching that identifies the called network.
P5
Originating Type
December 2014
Quick Dial Tone Number
Identifies the telephone number of a QDTqualified telephone line.
QM
Terminating Data Network Identification
Code
Transaction Class
For ordering purposes, a locally defined
code that identifies the class of a
transaction when there are multiple
selections available for a single
transaction type.
A locally defined code related to packet
switching that identifies the calling
network.
P4
Pricing Plan Level Indicator
A code which denotes the level at which a
pricing plan exists.
A locally defined code related to packet
switching which uniquely identifies the
remote node PAD (Packet
Assembler/Dissembler) that originally
creates the usage measurement
contained in the call detail record.
P3
Terminating Tariff Utility
A locally defined code related to packet
switching that identifies the type of access
arrangement at the terminating network.
Sensor Identification Code Qualifier
A locally defined code related to packet
switching, which uniquely identifies the
sensor where the record was recorded.
For PAD (Packet Assembler / Dissembler)
generated records, the sensor
identification may be the unique PADNCC/INF code.
P2
Originating Tariff Utility
Pricing Plan Type Indicator
A code which denotes the type of pricing
plan.
P1
Terminating Type
A locally defined code related to packet
switching that identifies the type of access
(dialed, dedicated) and access protocols
of the terminating connected end users.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
P0
DESCRIPTION of DE1000 Code
Minutes/Query Indicator
A code used to identify database usage
measurement values.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
EDI GUIDELINE
GENERAL SECTION
CODE
QT
DESCRIPTION of DE1000 Code
Quantity Qualifier
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
RD
The code used to qualify the quantity
appearing in the QTY segment associated
with the SI to which it is paired.
RA
RB
RC
RF
Rate City
Identifies the city used as the basis for
rate calculation. This may be different
than the actual service location city.
December 2014
Related Circuit Number
This element identifies the circuit
identification number(s) of a circuit already
in service or being provisioned.
RG
Regulatory Agency
This code identifies the regulatory agency
responsible for the tariff under which the
service is being ordered.
Valid DE234 values:
FCC
Federal Communications
Commission
PUC State Public Utility Commission
CRTC Canadian Radio and Telecom.
Commission
RH
Rate Category Indicator
Indicates the specific switched access rate
category being adjusted.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
RI
Related Committed Burst Size
Identifies the maximum amount of data
that a user is permitted to offer to the
network during time interval (Tc) across
the related circuit.
Requisition Type
An OBF value that identifies the type of
requisition being requested. For a list of
Valid Values used with this code see the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
Routing Arrangement
Identifies a grouping of WATS/800 access
lines and their service area.
Related Port Speed
Identifies the speed of the port of the
related circuit.
RE
Valid DE234 values:
01
Additional Minutes
(See Note 2 in Appendix A)
02
Average minutes per call
(See Note 2 in Appendix A)
AF1DQ Alternate F1 Disturber Quantity
BTQ
Bridge Tap Quantity
CCH Composite Channels
CH
Channels
F1DQ F1 Disturber Quantity
F2DQ F2 Disturber Quantity
GC
Gigacell
LCQ
Load Coil Quantity
MAXB Maximum B Channels
MDPK Maximum D Channel Packet
Usage
MTER Maximum Number of Terminals
NR
New Rate
PL
Per Line
RPET- Repeater Quantity
RQTY
RPL
Required Plan
SBCH Split Billed Channels
SC
System Capacity
SUCH Shared Use Channels
TCCH Tandem Routed Composite
Channels
TCH
Tandem Routed Channels
TST
Tests
VPL
Variable Plan
DESCRIPTION of DE1000 Code
Route Index
Identifies the index used by the Service
Provider’s switching equipment.
RJ
Rate Zone
Identifies the applicable zone rate.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
EDI GUIDELINE
GENERAL SECTION
CODE
RK
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Equipment Rate Band
10
11
12
13
14
Identifies the rate band for a specific type
of equipment.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
RL
RQ
Revenue Code
A locally defined code that identifies the
applicable journal or revenue code
associated with the itemized
charge/adjustment.
RN
RR
RS
Requested Telephone Number
RP
Related Committed Information Rate
Rate Schedule
Identifies the rating schedule used to
calculate usage charges.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Requested Local Serving Office
A locally defined code used by the
customer to identify the provisioning office.
This code, when resent, supersedes the
default local serving office field (LS).
Requested Number
Identifies the rate of ingress traffic across
the related circuit under normal conditions.
The telephone number requested and
provided in a directory assistance call.
RO
Discount
Economy
Prime
Standard
Multi-period
This element identifies a number(s) or a
range of numbers requested by a
customer that has not been previously
reserved. The number entry may include
a “W” for a wild card entry to indicate any
number can be provided in that position.
Requested Location
The location for which a telephone
number is provided in a directory
assistance call.
RM
DESCRIPTION of DE1000 Code
RT
Rate State
Identifies the state used as the basis for
rate calculation. This may be different
than the actual service location state.
Rate Period Code
RU
A EGCS maintained code identifying the
rate period in which the message
occurred.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Valid DE234 values:
01 Peak
02 Off Peak
03 Day
04 Evening
05 Night/Weekend
06 Weekend (when separate from
night)
07 Special Intrastate
08 Late night
09 Regular (Non time of day WATS)
December 2014
Rate Country
Identifies the country used as the basis for
rate calculation.
RV
Reserved Number
Identifies the number(s) to be reserved by
the telecommunications provider for future
use.
RW
Regulation Indicator
Identifies whether the charge was a
regulated or non-regulated service.
EGCS Valid DE234 values:
N
Non-Regulated
Y
Regulated
EDI GUIDELINE
GENERAL SECTION
CODE
RX
DESCRIPTION of DE1000 Code
CODE
Related Excess Burst Size
Identifies the maximum amount of data
that a user is permitted to offer to the
network that exceeds Bc during time
interval (Tc) across the related circuit.
RY
INDUSTRY CONVENTIONS
ASC X12 Version 004050
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
R6
R7
Subscriber/Router ID
R8
A unique identifier/device that is used to
route data information between the
evolving packet based networks in order
to create an overlay internetwork.
Small office/home office (SOHO) ID
Valid DE234 values:
L
Local Service
T
Toll Service
RZ
EMI Record Identification
Identifies charges associated with
customer premises equipment (CPE)
Small office/home office (SOHO) devices.
The Exchange Message Interface (EMI)
Record ID as defined in the ATIS EMI
standard (ATIS-0406000-23).
R9
R0
Identifies charges associated to a private
network connection for IP based services.
SA
R3
Routing Indicator
A code which identifies how usage was
routed through the network.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Remote Switching Unit Type
EGCS Valid DE234 values:
A
Add
AF
Add Feature(s)
C
Change
CF
Change From
CT
Change To
D
Delete
H
Short Term
I
Include
L
Seasonal
P
PIC Change
R
Record – Information only
RA
Record Activity – Add
RD
Record Activity – Delete
Remote Terminal Indicator
A locally defined code that indicates that
the loop originates at a remote terminal.
R5
A EGCS maintained code identifying the
type of activity resulting in an OC&C item
being created.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
A locally defined code to indicate the type
of remote switching unit (RSU).
R4
Service Activity Code
Repeater Type
A locally defined code that indicates the
type of repeater on the loop.
R2
Private Network Connection ID
Service Center Route Code
Identifies the code for the route followed
by the technician during his daily calls.
R1
Restore Type
A locally defined code that indicates the
type of suspension being restored.
Local/Toll indicator
Identifies whether a charge or credit is
related to local service or toll service.
DESCRIPTION of DE1000 Code
Rate Source Indicator
Identifies the source for the billed rates.
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
RF
RL
RS
S
SS
V
W
X
Y
SB
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
IEMA
IEME
IR
IT
IU
IY
IYN
IYS
LO
NA
NB
Switch Type
Indicates the type of local serving office
switch that is used to provide the BRI.
This information may be needed to
correctly configure the end user’s
customer premises equipment.
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
SC
Service Category Code
A locally defined code identifying the
service category. This may be a USOC.
SD
SE
Settlement Code
This code provides a greater level of detail
regarding zone rate or origin and
termination of the message and/or usage
service, charge or credit.
December 2014
Secondary/Terminating Exchange Carrier
Circuit (ECCKT) Data Link Connection
Identifier (DLCI)
Identifies the near and logical secondary
address of a Frame relay permanent
virtual circuit.
SF
Valid DE234 values:
AA Intra – Canada
AB Intra – US/US
AC Intrastate – Independent
Exchange Carrier/Independent
Exchange Carrier
AD Intra – Non-US-NANP
AE Intrastate – Intracompany
AF Intrastate – Intercompany
EE Interstate – InterLATA
ER Interstate – IntraLATA
IA Intrastate
IAMA IntraMTA-Intrastate
IAME IntraMTA-Interstate
IB Interstate – Independent
Exchange Carrier/Independent
Exchange Carrier
IC Interstate – US/Alaska, Hawaii,
Puerto Rico & US Virgin Islands
ID Interstate – Intracompany
IE Interstate – Intercompany
IEM InterMTA
DESCRIPTION of DE1000 Code
InterMTA – Intrastate
InterMTA – Interstate
Interstate
International
Interstate – US/US
Intermediary
Intermediary Non-Settlement
Intermediary Settlement
Local
International – US/Canada
International – International
Point/International Point
NC International – US or
Canada/International Point
ND International – US/Mexico
NJ Non-Jurisdictional
NS Non-Standard
OC Outside Specified Area
OF Offshore
OS Overseas
RE Intrastate – InterLATA
RR Intrastate – IntraLATA
WC Inside Specified Area
Remove Feature(s)
Relocate Service Location
Restore Service
Reseller Assume
Suspend Service
Conversion as specified
Conversion as is
Exclude
Deny
Service Feature/Option Code
A locally defined code to identify the
features and options for the associated
service, e.g., CENTREX line station
features; call waiting, call pickup.
For ordering purposes suggested DE234
values are in Appendix C.
SG
Service Group
Identifies a grouping of access
lines/service.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
SH
Switch Data Identifier
Identifies the type of Switched Data for
ISDN BRI in instances of multiple IXC
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
selection, e.g. One IXC is requested as
the PIC and one B channel providing
voice and another IXC is requested as the
PIC for the second B channel providing
just data. For a list of Valid Values used
with this code see the current issue of
OBF Local Service Ordering Guidelines
(LSOG).
SI
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Identifies additional descriptive scoping
information required to identify the
directory in which to place the listing.
SP
Circuit Number Special ID
Special Exemption for Customer Service
Information
Identifies the special exemptions
associated with the end user’s account.
The code value in DE 234 may be a
USOC, FID or valid Company code.
SK
Valid DE234 values:
CP Commitment Plan Applies
PP Payment plan commitment applies
TP Hi-capacity term pricing applies
SL
SQ
SR
Identifies the secondary call pickup group
arrangement(s) to which this line is to be
assigned.
Sub-Product Code
Special Routing Code
A code that identifies the type of special
routing being requested. For a list of Valid
Values used with this code see the current
issue of OBF Local Service Ordering
Guidelines (LSOG).
SS
Service Sub-category Code
A locally defined code that further defines
the service category. This code may or
may not be used in conjunction with
Service Category Code.
Speed Call Group
The speed calling group number for a
station line or the line number for each line
in the group.
Secondary Call Pickup Group
A locally defined code to provide
segregation of billing details by subproduct code.
Secondary Location Address
This element identifies an address for a
primary termination of CENTREX service
or Direct Inward Dialing trunk in addition to
the customer’s main address.
SM
SPG
Station Digit Dialing
Identifies the dialing patterns of the
CENTREX common block. For a list of
Valid Values used with this code see the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
Special Payment
Indicates that a charge applies to a
special billing/payment commitment plan.
A locally defined alphanumeric code that
further identifies a circuit.
SJ
DESCRIPTION of DE1000 Code
ST
Message Service Type
Type of message service being billed.
SN
ISDN Service Profile Identifier (ISPID)
Provides a code that must be programmed
into the ISDN BRI customer premises
equipment (CPE). This code is
transmitted from the CPE over the ISDN
BRI D-channel to the LSO switch. It must
be present in order for the BRI to become
active.
SO
Additional Scoping ZIP Code
December 2014
Valid DE234 values:
211 Information Referral
311 Non Emergency
511 Transportation Information
AH Attendant Handled/Operator
Handled
AN ANI (Automated Number ID)
BR Branding – OA (Operator
Assistance/DA (Directory
Assistance)
CA On Demand Call Feature
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
Activation
CE Cellular
CF Non-Dial Conference
CH Non-Dial Conference Leg
CI Dial Conference Bridge
CR Cost Recovery
CW Call Forward
DI Digital
E911 Enhanced 911
FC Florida COCOTS
FE Foreign Exchange
FX Fax
IA Intra-switch
IE Inter-switch
IN Inward Calls (excluding
WATS/800)
LI Local Interrupt
LV Local Verify
MC Messenger Charge
MO Mainland Originated
NM Non-Mainland Originated
NS Non-Subscriber Service Charge
ON ONI (Operator Number ID)
PP Payphone
PT Prompter
PV Private Line
RA Network Remote Access
TA Trace Activation
TG Telegram
VM Voice Mail
WD WATS Message Detail
SU
CODE
SW
SX
SY
SZ
S0
Scoping ZIP Code
Suspend Activity Indicator
Indicates the type of suspend activity
being requested.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
S1
USOC Surcharge Applicability Indicator
Indicates a surcharge is applicable to a
specific USOC
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
S2
Subtotal Type
Denotes the type of Customer Service
Record (CSR) subtotal
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Identifies the level of service the customer
is requesting.
December 2014
Start Signaling
Identifies the ZIP or Postal Code used to
aid in identifying the directory in which to
place the listing.
Service Level Identifier
OBF maintains a list of valid values that
may be used with this field. See Local
Two-Six Code (FID TSC)
Identifies type of start signaling requested.
For a list of Valid Values used with this
code see the current issue of OBF Local
Service Ordering Guidelines (LSOG).
Identifies the way in which an existing
service is configured.
SVC
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Switchboard ID
The unique identity assigned to message
trunks within a telecommunications
company.
Service Configuration
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
DESCRIPTION of DE1000 Code
Identifies the auxiliary switchboard
associated with this equipment item.
Secondary/Terminating Network
Address/User ID
The secondary/terminating data services
address/user ID in the transmission.
SV
INDUSTRY CONVENTIONS
ASC X12 Version 004050
S3
Status of Service Order
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
B
C
D
E
F
G
H
Identifies the status code/description of
the service order.
S4
Section
A locally-defined code that identifies the
section of the service order where the
FIDs or USOCs are located in (e.g., S&E,
BIL).
S5
J
K
L
M
N
P
Q
R
S
T
W
Y
Sonet Ring Mileage Indicator
A code which denotes whether the billing
of mileage is for the full Sonet ring or point
to point.
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
S6
TA
Switch Indicator
A locally defined value that identifies that
the LSO has multiple switches or a single
switch associated with the location, if
known.
TC
Timing Source
TD
TE
December 2014
Transmission Speed
Indicates the transmission speed for the
circuit.
TF
Framing
Describes the technique to be used on a
high speed digital communication circuit to
define the start and end of each single
frame of transmitted information as well as
the internal structure of that frame.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
EGCS Valid DE234 values:
A No collect and/or third number
Transmission Duplex
Valid DE234 values:
F Full Duplex
H Half Duplex
I
In Only
O Out Only
T Two Way
Blocking/Billing Exception
Indicates blocking and/or billing exception
on designated line(s).
Transfer Announcement Number
Indicates whether the circuit is to be
designed for one way or two way
transmission.
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
TB
No third number
No collect call
No 1+ dialing
No 0+ dialing
No 1+ and 0+ dialing
No 011 dialing
No directory call assistance call
comp.
No 700 dialing
No 976 dialing
No 915 dialing
No 900 dialing
No Casual Calling (10
No N11 (except 911 and 411)
No 411
No Incoming (CENTREX)
No 976, 900-303, 900-505
No 900-303
No 7 digit Toll (CENTREX)
No 500
The telephone number(s) to which the
calls to an intercepted telephone number
are to be referred.
Identifies the source of timing.
EGCS Valid DE234 values:
1
Internal
2
External
3
Loop
C Customer
T
Telecommunication Provider’s
DESCRIPTION of DE1000 Code
TG
Coding
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
Describes the method used on a high
speed digital circuit to encode the stream
of bits to ensure the proper bit density and
proper transmission synchronization
between the transmitting and receiving
stations. Identifies unique Dialing Plan for
some services arrangements.
TH
Trunk Group Number
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
listings.
TP
TQ
Termination ID
TR
TK
Terminating User
TS
Identifies lines and trunks that require
specific central office equipment.
Valid DE234 values:
NS Non-Subscriber
SR Subscriber
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Trunk Number/Identification
EGCS Valid DE234 values:
ARL
Two Point Automatic Ringdown
Signaling Arrangements Loop
Closure
DST
Delayed Dial Start
EMS E&M Signaling Interface
EM1
E+M1
EM2
E+M2
EM3
E+M3
IST
Immediate Start
GST
Ground Start
LPS
Loop Signaling
LRB
Loop Reverse Battery
LST
Loop Start
SAC
Manual Signaling Arrangement
with Code Selection for Multipoint
Service
SAH
Manual Signaling Arrangement for
Two-Point or Multipoint Services
20 Hertz Interface
SRA
Signal Range Extension-Type A
SRB
Signal Range Extension-Type B
SRC Signal Range Extension-Type C
SRE
Signal Range Extension
VST
Virtual Start
WST Wink Start
To/Terminating Location
To/Terminating Station Telephone
Number
The terminating telephone number.
TN
Telephone Number
For Billing purposes, the line number or
network address associated with billable
charges.
For Ordering purposes, the line number or
range of numbers associated with a main
account
TO
Type of Signaling
Identifies the user of the service to be
billed as itemized usage.
The terminating location of a call or a
circuit.
TM
Transport Tariff
A locally defined tariff.
Identifies individual trunks in a trunk
group.
TL
Telephone Line Identifier
To identify the pilot number in a multiline
hunt group.
Identifies the type of termination
equipment used for a private line access.
TJ
Telecommunications Provider Office
Identifies the appropriate Service Center
in a telecommunications company which is
to receive this request.
Identifying number for a group of trunks.
TI
DESCRIPTION of DE1000 Code
Service Center DA Listings
Identifies the provider’s service center for
processing Directory Assistance (DA)
December 2014
TT
Transport Type
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
Identifies the type of transport for the
usage charges.
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
T0
Service Center Directory Listings
T1
Identifies the provider’s service center for
processing directory listings.
TV
TX
TY
Telephone Service – Boards
Identifies the specific lines/trunks that are
to be wired to the Telephone Service/
Connection Information for boards.
T3
Telephone Service – Jack
Identifies the specific lines/trunks that are
to be wired to the Telephone Service/
Connection Information for jacks.
T4
Telephone Service – Forwarding Number
Identifies the telephone number on which
a jack physically works when the jack also
physically works on the account on which
this request is written. It is the number at
the Telephone Bureau to which calls are
forwarded.
Translated Telephone Number
The translated telephone number
associated with a Dialed Telephone
number when different than the
To/Terminating Number, e.g. the working
telephone number for an 800 call.
T5
Type of Service
T6
An OBF value which identifies the type of
service for the line ordered. For a list of
Valid Values used with this code see the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
TZ
T2
Style Code
An OBF value that identifies whether the
listing is a straight line, caption header,
etc. For a list of Valid Values used with
this code see the current issue of OBF
Local Service Ordering Guidelines
(LSOG).
Telephone Service – Position
Identifies the specific line/trunks that are to
be wired to the Telephone Service/
Connection information for position.
TTY or TDD Indicator
An OBF value that identifies that Service
Equipment or Directory Listings should
have a special TTY or TDD phrase
included. For a list of Valid Values used
with this code see the current issue of
OBF Local Service Ordering Guidelines
(LSOG).
TW
Telephone Number Type
An OBF value which identifies the type of
telephone number being requested. For a
list of Valid Values used with this code see
the current issue of OBF Local Service
Ordering Guidelines (LSOG).
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
TU
DESCRIPTION of DE1000 Code
Terminal Number
Number used to identify a Terminal.
Transfer of Calls Options
A code to identify the type of calls options
requested by the end user.
Telephone Line Identifier Type
OBF maintains the list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
An OBF value which identifies the type of
Telephone Line Identifier. For a list of
Valid Values used with this code see the
current issue of OBF Local Service
Ordering Guidelines (LSOG).
EGCS Valid DE234 values:
N None
S Standard
T Split Transfer of Calls
-- Code provided by Trading Partner
December 2014
EDI GUIDELINE
GENERAL SECTION
CODE
T7
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Jack Number
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Number used to identify a jack.
T8
Transfer Call to Secondary Number
UL
Identifies a secondary number to which
calls can also be transferred to.
T9
DID Telephone Number Range
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
UB
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Apportioned Minutes of Use (MOU) Type
A code which denotes the type of Minutes
of Use used in an apportionment
calculation.
UP
US
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
UT
Class of Service (USOC)
UU
UK
Unbundled Tariff Indicator
A code which denotes that the applicable
rates are from the unbundled tariff.
A service provider defined code that
identifies the class of service for a
dedicated or switched circuit (or group of
circuits).
UG
PIU Source Indicator.
A code which denotes the source of the
PIU used when actual data is not
available.
A code used to identify the type of USOC
presented in customer service record
information.
UC
Percent Local Usage
The percent of usage for determination of
the access service charges associated
with CABS billing.
Class of Service (USOC) Indicator
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Universal Life Line Designator
Indicates whether the residential resale
line is the Primary Line or a Non-Primary
line at the same address for the purpose
of tracking Universal Life-Line
qualification.
Identifies the range of DID telephone
numbers within the same switch where a
dash (-) is used to express the range, e.g.
2035221200-1259.
UA
DESCRIPTION of DE1000 Code
For CABS billing applications, see current
issue of CABS BOS Specifications for a
list of valid values.
Unbundled Usage Indicator
USOC Billing Group
Identifies the minutes of use originating
from or terminating to an unbundled port.
Identifies a grouping of USOCs, or other
service codes, across customer locations.
The grouping may be used to identify
USOCs that are eligible for a special rate
and/or discount.
UY
Cut Type
Trunk Type
U1
A locally defined code that identifies the
type of Batch Hot Cut being performed.
USOC Specific Percent Local Usage
Identifies the type of trunk.
December 2014
The percent of local usage for
EDI GUIDELINE
GENERAL SECTION
CODE
DESCRIPTION of DE1000 Code
determination of the local access service
charges for a particular USOC.
U2
VP
VR
VM
VT
Valid DE234 values:
A Surcharge Applies and should be
Billed
B Customer has a blanket
exemption certificate filed with the
local exchange company
E Customer certifies that the service
terminates on a device which
prohibits the interconnection of the
service with the local exchange
carrier and the circuit is exempt
from the surcharge
N Surcharge does not apply to this
circuit
Virtual Connection Identifier
Mailbox access billing categories for
access methods.
Valid DE234 values:
UA User Access
CA Outside Caller Access
December 2014
Voice Traffic Surcharge Exempt Reason
Identifies the applicability of the leakage
surcharge for each location on a circuit
carrying voice traffic.
Virtual Circuit Identifier
Voice Mailbox
Variable Rate Code
Identifies that a variable rate applies to the
billed item.
Percent Proportional Usage.
Identifies the address of a virtual
connection.
Virtual Path Indicator
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
Identifies the logical connection address
between the provider's switch and the
circuit for the virtual circuit requested.
VK
Virtual Path Identifier
Identifies the logical connection location
and quality of service for the virtual path
requested.
The percent of monthly recurring charges
to be billed to the CLEC for utilization of
two-way trunks for local usage.
VC
DESCRIPTION of DE1000 Code
For Ordering purposes, identifies the
logical connection address for the virtual
path requested. For Billing purposes,
identifies the address of a virtual path.
USOC Specific Percent
Intrastate/intraLATA Usage
The percent of intrastate/intraLATA usage
for determination of the
intrastate/intraLATA versus
intrastate/interLATA access service
charges for a particular USOC.
U5
VI
USOC Specific Percent
Interstate/interLATA Usage
The percent of interstate/interLATA usage
for determination of the
interstate/interLATA versus
interstate/intraLATA access service
charges for a particular USOC.
U4
CODE
USOC Specific Percent
Intrastate/InterLATA Usage
The percent of intrastate/interLATA usage
for determination of the
intrastate/interLATA versus
intrastate/intraLATA access service
charges for a particular USOC.
U3
INDUSTRY CONVENTIONS
ASC X12 Version 004050
WC
Wire Count Option
Number of wires to be utilized in the
provisioning of the service.
Valid DE234 values:
2
Two Wire
4
Four Wire
8
Eight Wire
EDI GUIDELINE
GENERAL SECTION
CODE
WN
DESCRIPTION of DE1000 Code
INDUSTRY CONVENTIONS
ASC X12 Version 004050
CODE
Wide Area Telephone Service (WATS)
Line Number SIT Code
The WATS or 800 service access line
number for which service is rendered.
WS
WT
W1
XA
Z1
Special Identifying Telephone Number
Supplement (SIS) code used to identify
individual 800 service lines.
Z2
Mutually Defined
(See Note 1 in Appendix A)
Z3
Mutually Defined
(See Note 1 in Appendix A)
Identifies the End User’s Working
Telephone Number at a specific location.
Z4
Mutually Defined
(See Note 1 in Appendix A)
Working Telephone Number Status
Z5
Mutually Defined
(See Note 1 in Appendix A)
A locally-defined code that identifies the
status of the working telephone number.
Z6
Mutually Defined
(See Note 1 in Appendix A)
Z7
Mutually Defined
(See Note 1 in Appendix A)
Z8
Mutually Defined
(See Note 1 in Appendix A)
Z9
Mutually Defined
(See Note 1 in Appendix A)
99
Continuation Code
Working Telephone Number
Call Detail Indicator
Valid DE234 values:
8
Billed by Other Entity
9
Previously Sent
NCP – ID
Identifies a number that is set up in the
NCP to verify a customer exists for
intelligent services.
XE
Valid DE234 values:
1
Abandoned Call
Cross Reference Code of Circuit
Location/Drop to Bridging Location
Code identifying the circuit location or drop
at the bridging location.
YP
Used only when preceding DE234
exceeds maximum length of field.
Call Abandoned Indicator
Identifies calls abandoned by the
originator.
XR
OBF maintains a list of valid values that
may be used with this field. See Local
Service Ordering Guidelines (LSOG) for a
list of these valid values.
.
Mutually Defined
(See Note 1 in Appendix A)
Wide Area Telephone Service (WATS)SIS
Code
Identifies disposition of a Call Detail
Record.
XC
DESCRIPTION of DE1000 Code
Feature Query Type
1104 Name Component Qualifier
Type=ID Min=2 Max=2
Code identifying the type of name component
EGCS Maintained Code Values for IN2
Segment.
Phrase Code values to be used in the IN2 segment
in IN203, DE93, are OBF Field Identification (FID)
codes and help to delineate between otherwise
identically qualified IN2 segments.
CODE
01
Identifies the query type selected.
December 2014
DESCRIPTION of DE1104 Code
Prefix
EDI GUIDELINE
GENERAL SECTION
CODE
Suffix
Valid entries for IN203:
TITLE2 Title of Address 2
TITLE2D Title of Address of 2 for Dual
Name listing
10
Generation
Valid entries for IN203:
TL
Title of Lineage
TLD
Title of Lineage for Dual Name
listing
1270 Code List Qualifier Code
TYPE=ID MIN=1 MAX=3
Code identifying a specific Industry code list.
CODE
DESCRIPTION of DE1270 Code
HC
Report Purpose Code
1271 Industry Code
TYPE=AN MIN=1 MAX=30
Code indicating a code from a specific Industry
code list.
PRE-ADDRESS – Pre-ordering Address
Response Code List
NOTE: This codelist should not be used with
ELMS5 and later.
CODE
A
B
C
D
E
ELMS5 and later.
DESCRIPTION of DE1104 Code
Valid entries for IN203:
TITLE1 Title of Address 1
TITLE1D Title of Address of 1 for Dual
Name listing
09
INDUSTRY CONVENTIONS
ASC X12 Version 004050
DESCRIPTION of DE1271 Code
Found (with actual entry of
database)/match
Not found/no match
Alternates exist/near match
Restricted/Government
Additional building and floor
PRE-FRESP - Pre-ordering Feature/Service
Response Code List
NOTE: This code list should not be used with
December 2014
CODE
A
B
G
N
P
Y
DESCRIPTION of DE1271 Code
Alternate NPA-NXX available
Product available may require special
handling
Grandfathered
Not available
Pending
Yes
QR3 – HC - Chart Type
CODE
CC
CU
MR
NP
PP
QM
RR
UU
XX
DESCRIPTION of DE1271 Code
C Chart
CUMSUM Chart
Moving Range Chart
NP Chart
P Chart
QMP Chart
R Chart
U Chart
X-Bar Chart
1301 Agency Service, Promotion,
Allowance, or Charge Code
TYPE=AN MIN=1 MAX=10
Agency maintained code identifying the services,
promotion, allowance, or charge.
EGCS MAINTAINED CODE VALUES
CODE
DEFINITION of DE1301 Code
1
275
295
350
2T
ADV
Type 1 Billing
Discount Incentive
Discount Special
Expedited Shipments
Two Tier Pricing Contract
Advances This is used to indicate an
Advanced Payment
Administrative Overhead Percentage
Avoidance – Geographic Area
Avoidance – Purchase Order
Avoidance – Total Circuit
CENTREX Line Capacity Contract
Customer Calling Discounts
Connect Charge
CENTREX Service Transport Facility
Contract
Contract/Tariff Plan
Disabled Person Discount
Discount
AO
AV1
AV2
AV3
CC
CD
COC
CP
CT
DP
DSC
EDI GUIDELINE
GENERAL SECTION
CODE
DEFINITION of DE1301 Code
DV1
DV2
DV3
EEH
EXP
FUR
GRD
MAE
MTL
Diversity – Central Office
Diversity – Local Loop
Diversity – Total Circuit
Engineering Charge
Expedited Service Charge
Feature Unit Rate
Groupage Discount
Monthly Rental
Installation Material
For a list of Valid Values used with this
code in SAC13 see the current issue of
OBF Local Service Ordering Guidelines
(LSOG).
Overtime Loading
Optional Payment Discount
Promotional Discount
Percentage Pricing Contract Plan
Promotion Discount
Quantity Discount
Rate Code
This is used to specify that SAC08
contains the contracted annuity factor
Rate Stability Plan
Special Assembly Charge
Service Charge
Time Indicator
For a list of Valid Values used with this
code in SAC13 see the current issue of
OBF Local Service Ordering Guidelines
(LSOG).
Termination Liability Charge
Volume Discount
Volume Pricing Plan
Variable Term Contract Pricing Plan
OAC
OP
PAI
PP
PR
QQD
RTC
RS
SA
SER
TIND
TL
VAB
VP
VT
December 2014
INDUSTRY CONVENTIONS
ASC X12 Version 004050
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix A
Notes
Note 1:
This code is to be used only temporarily to meet mandated changes. A request for a new
code should be completed within 90 days.
Note 2: This code is not valid when used with ASC X12 Release 3030 or higher.
Note 3: These codes are only valid with ASC X12 Release 3040 or higher.
Note 4: These codes are not valid with ASC X12 Release 3040 or higher.
Note 5: These codes are only valid with ASC X12 Release 3050 or higher.
Note 6: These codes are not valid with ASC X12 Release 3050 or higher.
Note 7: These codes are not valid with ASC X12 Release 4010 or higher.
Note 8: These codes are only valid with ASC X12 Release 4010 or higher.
Note 9: These codes are only valid with ASC X12 Release 4020 or higher.
Note 10: The three character codes for 1000 Service Characteristics Qualifiers are only valid with
ASC X12 Release 4050 or higher.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix B
Pseudo CICs
AT&T
I288
00IL
00IN
00MI
00OH
00WI
00AR
00KS
00MO
00OK
00TX
00CA
00NV
00LD
00AM
0SN0
0SS0
00AL
00FL
00GA
00KY
00LA
00MS
00NC
00SC
00TN
-
AT&T Invoice Billing
AT&T Illinois
AT&T Indiana
AT&T Michigan
AT&T Ohio
AT&T Wisconsin
AT&T Arkansas
AT&T Kansas
AT&T Missouri
AT&T Oklahoma
AT&T Texas
AT&T California
AT&T Nevada
AT&T Long Distance
AT&T Messaging
AT&T Connecticut
AT&T Diversified Group
AT&T Alabama
AT&T Florida
AT&T Georgia
AT&T Kentucky
AT&T Louisiana
AT&T Mississippi
AT&T North Carolina
AT&T South Carolina
AT&T Tennessee
Cincinnati Bell
00CB
-
Cincinnati Bell
MCI
I222
-
MCI Invoice Billing – formerly Worldcom
Qwest
0C00
0W00
0E00
-
Qwest Central
Qwest Western
Qwest Eastern
SBC
SBC
SBCI
SBCT
SBCIL
SBCIN
SBCM
SBCMI
SBCOH
SBCWI
SBCAR
SBCKS
SBCMO
SBCOK
SBCTX
SBCCA
SBCNV
SBCLD
-
SBC
SBC Internet Services
SBC Telecom
SBC Illinois
SBC Indiana
SBC Messaging
SBC Michigan
SBC Ohio
SBC Wisconsin
SBC Arkansas
SBC Kansas
SBC Missouri
SBC Oklahoma
SBC Texas
SBC California
SBC Nevada
SBC Long Distance
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix B
Pseudo CICs
Southwestern Bell Tel.
SWBT
-
Southwestern Bell Telephone
Sprint
I333
-
Sprint Invoice Billing
Sprint LTD
0141
0142
0209
0341
0470
0506
0567
0661
0832
0203
1317
1456
1595
1728
1842
1957
2084
2400
-
New Jersey Telephone Company
United Telephone Company of New Jersey
United Telephone Company of Pennsylvania
United Telephone Company of Florida
Carolina Telephone and Telegraph Company
United Telephone Company of the Carolinas
United Inter-Mountain Telephone Company
United Telephone Company of Ohio
United Telephone Company of Indiana, Inc.
United Telephone Eastern Group
United Telephone Company of Iowa
United Telephone Company of Minnesota
United Telephone Company of the West
United Telephone Company of Arkansas
United Telephone Company of Kansas
United Telephone Company of Missouri
United Telephone Company of Texas
United Telephone Company of the Northwest
Verizon Communications Inc.
00NJ
0CPV
0CPW
-
0CPM
0CPD
-
00BP
00DS
0698
09X0
0A11
CONT
GTET
-
Verizon - formerly New Jersey Bell
Verizon - formerly Chesapeake & Potomac of Virginia
Verizon - formerly Chesapeake & Potomac of West
Virginia
Verizon - formerly Chesapeake & Potomac of Maryland
Verizon formerly Chesapeake & Potomac of District of
Columbia
Verizon - formerly Bell of Pennsylvania
Verizon - formerly Diamond State
Verizon - formerly New York Telephone
Verizon - formerly New England Telephone
Verizon - formerly Southern Bell
Verizon - formerly Contel of California
Verizon - formerly GTE Telephone Operations
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
3WC
3WC002
3WC003
AAC001
AAC002
AAC003
AAC004
ACJ
ACR001
ACR002
ACR003
ACR004
ACR005
ACR006
ADL
ARS001
ARS002
ARS003
ARS004
ARS005
ARS006
ARS007
CCG001
CCG002
CCG003
CFW001*
CFW002*
CFW003*
CFW004*
CFW005*
CFW006*
CFW007*
CFW008*
CFW009*
CFW010*
CFW011*
CFW012*
CFW013*
CFW014*
CFW015*
CFW016*
CFW017*
December 2014
Description
3-Way Calling
3 Way Calling – Restricted to United States
3 Way Calling-with International Access
Account and Access Codes
Account Codes – Per Line
Account Codes – Per System
Authorization Codes – Per Line
Authorization Codes – Per System
Anonymous Call Rejection
Automatic Call Return
Automatic Call Back
Automatic Recall
Last Call Redial
Continuous Redial
Automatic Recall – Last Call Return
Automatic Recall – Per Number
Additional Line
Automatic Route Selection
Change of Schedule
Changes/Rearrangement
Common Equipment
Expensive Route Warning Tone
Facility Restriction Level
Time of Day Control
Time of Day Routing
Conference Calling
6 Way
Meet Me
Preset
Call Forward
Busy Don’t Answer
Busy Line
Busy Line – All Calls
Busy Line – Cust Actvn, Dactvn & Change Cpblty; Programmable
Busy Line – Data
Busy Line – Don’t Ans
Busy Line – Don’t Ans – Sta Actvn, Dactvn & Chg Cpblty
Busy Line – Don’t Ans – Unrestricted Source
Busy Line – Incoming Calls
Busy Line – Incoming Only – Data
Busy Line – Inhibit Line Busy
Busy Line – Inhibit Make Busy
Busy Overflow
By Calling Number – Day of Year Routing
By Calling Number – Time of Day/Day of Week Routing
Call Forwarding Number
Call Waiting Calls
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
CFW018*
CFW019*
CFW020*
CFW021*
CFW022*
CFW023*
CFW024*
CFW025*
CFW026*
CFW027*
CFW028*
CFW029*
CFW030*
CFW031*
CFW032*
CFW033*
CFW034*
CFW035*
CFW037*
CFW038*
CFW039*
CFW040*
CFW041*
CFW042*
CFW043
CHD001
CHD002
CHD003
CID001
CID002
CID003
CID004
CID005
CID006
CID007
CID008
CID009
CID010
CID011
CID012
CID013
CID014
CID015
CID016
CID017
December 2014
Description
Calling Number
Customer Programmable Call Forward Busy
Customer Programmable Call Forward Don’t Answer
Don’t Answer All Calls
Don’t Answer Call Forward Busy – Per Line
Don’t Answer Call Forward Busy – Per System
Don’t Answer – Customer Activation, Deactivation & Change Capblty; Programmable
Don’t Answer – Incoming Calls
Don’t Answer – Incoming Calls – Data
Don’t Answer – Intra-office
Don’t Answer – Unrestricted Source
Over Private Facilities
Over Private Facilities – Per Line
Over Private Facilities – Per System
Over Private Facilities – Reminder Ring Option
Over Private Facilities – Reminder Ring Option Inhibited
Per Key Per Set
Remote Activation, Deactivation & Change Capability
Time of Day/Day of Week
Variable
Variable – Don’t Answer
Variable – Don’t Answer – Intercom Line Only
Variable – Per Console; Attendant Programming
Variable – Reminder Ring Option Inhibited
Delay Call Forwarding
Call Handling & Distribution
800 Service; Alternate Call Routing
800 Service; Emergency Updates Activate or Deactivate
Call Hold
Caller Identification (ID)
Call Waiting Display
Calling Name Display
Calling Name Display – Blocking
Calling Name Display – Selective Blocking
Calling Name & Number Delivery
Calling Name & Number Delivery – Anonymous Caller Rejection
Calling Name & Number Delivery – Blocking
Calling Name & Number Delivery – Caller Identification
Calling Name & Number Delivery – Selective Blocking
Calling Number Delivery
Calling Number Delivery – Blocking
Calling Number Delivery – Caller ID # Only
Calling Number Delivery – Selective Blocking
Dialable Calling Name & Number Delivery
Dialable Calling Number Delivery
Display Application
Management Info System Package – Per Display Application
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
CID018
CID019
CID020
CID021
CMS001
CMS002
CMS003
CMS004
CMS005
CMS007
CMS008
CMS006
CPK
CPU001
CPU002
CPU003
CPU004
CPU005
CRD
CSC001
CSC002
CSC003
CSC004
CSC005
CTX*
CWG001
CWG002
CWG003
CWG004
CWG005
CWG006
CWG007
CWG008
CWG009
CWG010
CWG011
CWG012
CWG013
DCP*
DIA*
DID001*
December 2014
Description
Software Feature – Custom Roll Over From Display Application to Switch Application
Software Feature – Interface additional 800 Service Numbers – Per No Arranged
Switch Application
Selective Call Management for Anonymous, Private or Unidentified Calls
Centron/CENTREX Management System
Bulk Change
Custom Reports
Initial Installation
Network Manipulation
Packet Control Capability
Subsequent Installation
System Partitioning
Priority Service
Call Park
Call Pickup
Basic
Call Hold
Pickup Group
Directed Call Pickup Barge-In
Directed Call Pickup Non-Barge-In
Call Related Database
Selective Call
Acceptance
Distinctive Alert
Forwarding
Rejection
International Call Alert
Call Transfer
Call Waiting
Cancel Call Waiting; No Double Connect
Dial
Dial Originating
Indication
Originated
Originating
Terminating Calls
Terminating Incoming Calls
Camp-On & Call Waiting – Originating Music Option
Camp-on & Call Waiting – Originating Recorded Announcement Option
Camp-on & Call Waiting – Originating Silence Option
Call Waiting Identification (ID)
Call Waiting ID Options
Data Call Protection (DM-100)
Direct Inward Access Code
DID
Distinctive Ringing
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
DRG001
DRG003
DRG004
DRG002
EBO
EAS*
ESI*
FEX*
HTY001
HTY002
HTY003
HTY004
HTY005
HTY006
HTY007
HTY008
HTY009
HTY010
ICM*
ICM001
KBA
LSP001
LSP002
MBY001
MBY002
MOH*
MWG001
MWG002
MWG003
MWG004
MWG005
NSA*
OCP
RCF001*
RCF002*
RCY001*
RDC
RTI001*
RUD
SBL
SCG001
December 2014
Description
Distinctive Ringing & Call Waiting Tone – Class B Tone
Distinctive Ringing – Centron 1, Call Waiting; Priority Call Per Line
Distinctive Ringing/Distinctive Call Waiting Tone
Distinctive Ringing & Call Waiting Tone – Class C Tone
Executive Busy Override
Extended Area Service Unlimited Calling
Electronic Set Interface – Per Line
Foreign Exchange
Hunting
Circular
Sequence – Non-Multiline Group
Hunting Groups
Multi Line Hunting
Multiple Position Hunt Per Group
Multiple Position Hunt Per Line
Multiple Position Hunt Queuing Per Group
Non-Hunting Number
Preferential Hunting
Combination (CENTREX)
Intercom Feature
Intercom Plus
Key/Button Programming Assignment
Loudspeaker Paging
Per Attendant Access Per Console
Per Trunk Group
Make Busy
Arrangement
Arrangement Key Controller
Music On Hold
Message Waiting
Audible Message Waiting
Message Center
Message Waiting Indication
Message Waiting Visual
Executive Message Waiting
Night Service Arrangement
Optional Calling Plan
Remote Call Forwarding
Call Forwarding Number
Ring Cycle
Ring Cycle
Resale Direct Connection
Route Index
Resale Usage Discount
Station Busy Lamp
Speed Calling
1 Digit Controller
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
SCG002
SCG003
SCG004
SCG005
SCG006
SCG007
SCG008
SCG009
SCG010
SCG011
SCG012
SCG013
SCG014
SCG015
SCG016
SCG017
SCG018
SCG019
SCG020
SCG021
SCO001
SCO002
SMD001
SMD002
TDR001
TDR002
TTN
UCD001
UCD002*
UCD003
UCD004
VAD
VMS001
VMS002
VMS003*
VMS004
VMS005
VMS006
VMS007
VMS008
VMS009
VMS010
December 2014
Description
1 Digit User
1 # List Individual
1000 Code
2 Digit Controller
2 Digit User
2 # List Individual
30 Code – Customer Changeable
30 Numbers
50 Code – Customer Changeable
6 Code
6 Code – Customer Changeable
70 Code – Customer Changeable
8 Code – Customer Changeable
Change in Repertories
Change Speed Calling Group List
Network Speed Call
Pause Insertion – Per System
Share Speed Call List One
Share Speed Call List Two
Up to 10 Code Capacity
Station Camp On
Per Line
Service Establishment
Station Message Detail Recording
Call Detail
Per Line
Time of Day Routing
Per Line
Update
Touch Tone
Uniform Call Distribution
Delay Announcement
Hunt Group
Music After Delay
Silence After Delay Announcement Trunk
Voice Activated Dialing (Dial Dictation)
Voice Message Service
Call Answering Service
Call Routing Service
Call Routing to Number
Contributor Mailbox
Extension Mailbox
Listen Only Mailbox
Message Notification
Message Send
Scheduled Greetings
Transfer Mail Box
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Appendix C
Feature Code List
SF
CODE
VMS011
VMS012*
VMS013*
VMS014
VMS015
VMS016
VMS017*
VMS018
VMS019
VMS020
VMS021
VMS022
VMS023
VMS024
VMS025
WAT001*
WAT002*
WAT003
WAT004
WAT005
WAT006
WAT007*
WAT008
WAT009
WAT010
WAT011
WAT012
WAT013
WAT014
WAT015
WAT016
WML

Description
Voice Mail
Voice Mailbox – With Call Forwarding – Busy Line
Voice Mailbox – With Call Forwarding – Busy Line – Don’t Answer,
Message Waiting Audio & Visual Indicator
Voice Mail Box
Guest Mail Box
Return to Operator
Digital Pager Option
Voice Pager Option
Daily Reminder
Voice Calendar or Reminder
Message Delivery Options
Urgent Message Delivery
Language Prompts
Message Waiting Indicator
Open Network Architecture (ONA) Voice Mail – Call Forward Busy
WATS Service
Area Code Routing
Area of Service
Bulk Calling
Call Allocator
Call Attempt Data Reports
Call Prompter
Courtesy Routing
Emergency Routing
Exchange Routing
Mass Calling
On-line Call Detail
Overflow Routing
Referral Service
Routing Control Service
Single 800 Number
Time of Day Routing
Warm Line Feature
Additional Feature Data required for these “SF” codes using the “FD” code in the next
pair.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Summary of Revisions
12/14 Revisions from December Virtual Meeting
Added new DE 1000 code value “R8” for Small office/home office (SOHO) ID
Added new DE 1000 code value “R9” for Private Network Connection ID
10/13 Revisions from October Virtual Meeting
Added new DE 150 code value “UAF” for Universal Access Fund
Added new DE 1000 code value “A4” for Admin ID
Added new DE 1000 code value “R7” for subscriber/router ID
10/10 Revisions from October Meeting (Virtual Meeting)
Modified DE 1000 code: “AP – Translated Account Code/PIN/Department ID”.
Added new DE1000 code: “A3 - Translated Sub-Department ID”.
09/07 Revisions from August Meeting in San Antonio, TX
Added EDI billing Pseudo CIC’s to Appendix B for AT&T Local Services (AT&T
Alabama, AT&T Florida, AT&T Georgia, AT&T Kentucky, AT&T Louisiana, AT&T
Mississippi, AT&T North Carolina, AT&T South Carolina, and AT&T Tennessee).
11/06 Revisions from November Meeting in Sacramento, CA
Added new DE751 codes: “FE – Facility Environment”, “FEP – Facility Environment
Provisioned”, “FSQ – Fiber Service Qualification”, “DD – Fiber Capability Indicator”
Added new DE1000 code: “IF – Installation/Disconnect Code”.
Added new DE234 codes for SIDE1000 code “IF”:
“I – Installation”, “D – Disconnect”, “B – Both Install and Disconnect”
06/08 Revisions from June Meeting in Savannah, GA
Corrected link name on page 10.4-5 from www.necaservices.com to www.neca.org
03/06 Revisions from March Meeting (Virtual Meeting)
Updated description for DE 66 value 91 related to Telephone Billing applications
Add EDI billing Pseudo CIC for AT&T Messaging
Add EDI billing Pseudo CIC for AT&T Long Distance
Remove EDI billing Pseudo CIC information related to Ameritech, Pacific Bell, and SNET
Add EDI billing Pseudo CIC's for AT&T Illinois, AT&T Indiana, AT&T Michigan, AT&T Ohio, AT&T
Wisconsin, AT&T California, AT&T Nevada, AT&T Arkansas, AT&T Kansas, AT&T Texas, AT&T
Oklahoma, AT&T Missouri
Add EDI billing Pseudo CIC's for AT&T Connecticut and AT&T Diversified Group
11/05 Revisions from November Meeting (Virtual Meeting)
Updated DE128 code “82” to add associated phrase code “ORCD”
Added new DE352 code for DE128 value “IX”: “PONLEREFNUM”
Added new DE369 code “LRNUM” for DE128 value “IX”:
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added new DE369 code “LRC” for DE128 value “82”:
Added new DE369 code “ERRCODE” for DE128 value “1Q”:
Added new DE1000 codes “CPG”, “SPG”, “DOS”
05/05 Revisions from May Meeting in Denver, CO
Added new Pseudo-CIC code “SBCLD” – SBC Long Distance
Added new DE234 code “36” (North America) to DE1000 code “DA”
02/05 Revisions from February Meeting in Long Beach, CA
Added new DE128 code “MZ”
Added new DE234 value “0315” under DE235 code “SV”
Added new DE1000 codes “CHC”, “CMA”, “SVC”
10/04 Revisions from October Meeting in Las Vegas, NV
Updated description of DE234 code “C” under DE1000 code “OC” (remove “partial
month”)
09/04 Revisions from September Meeting (Virtual Meeting)
Added DE1000 code “EUA”
03/04 Revisions from March Meeting (Virtual Meeting)
Added new DE751 codes “BCOPT”, “CZ”, “ISR”
Added new DE1000 codes “DRT”, “UY”
02/04 Revisions from February Meeting in Charlotte, NC.
Corrected URL for DE66 Identification Code Qualifier of 91
12/03 Revisions from September Meeting in Birmingham, AL.
Renamed Pseudo-CIC codes under “Worldcom” to “MCI”
09/03 Revisions from September Meeting in Denver, CO
Added new DE751 codes: “LTNE – Listing Telephone Number Environment”
Modified DE1000 code: “IQ” to “An OBF value which identifies the type of transaction.”
Modified DE1000 code: “IR” to “An OBF value which identifies the transaction activity.”
Renamed Pseudo-CIC codes under “Bell Atlantic and GTE” to “Verizon
Communications Inc.
06/03 Revisions from June Meeting in Seattle, WA
Updated DE128 code “DISPNOTES” description to add “or log”. The description now
reads - “Dispatch or log information associated with the service order”.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added new DE751 codes: “TAI – Transaction Activity Indicator”, “MLT – Mechanized
Line Test”, “CX – Re-Qualification”, “CY – Switch Supported”
Modified DE751 phrase code: “LSA”, added description after the element name
Added new DE1000 codes: “MAC”, “S6”, “VK”
Modified DE1000 code: “VI” to add a billing purpose to the definition
Added the following Pseudo-CIC codes under “SBC”: “SBCM – SBC Messaging”
03/03 Revisions from March Meeting in St. Louis, MO
Updated DE128 code “V0” to add associated phrase code “PONVER”.
Added new DE751 codes: “CO”, “CP”, “CQ”, “CR”, “CS”, “CT”, “CU”, “CV”, “CW”,
“DA”, “DC”, “ACCTDES”, “ASGTRSTN”, ”CFAST”
Updated definition for existing DE751 phrase code: “QRYIND”
Added New DE234 codes to existing DE1000 code “CH”: “08”, “09”
Added new DE1000 Codes: “EC”, “FQ”, “R6”
Added the following Pseudo-CIC codes under “SBC”: “SBCIL”, “SBCIN”, “SBCMI”,
“SBCOH”, “SBCWI”, “SBCAR”, “SBCKS”, “SBCMO”, “SBCOK”, “SBCTX”, “SBCCA”,
“SBCNV”.
11/02 Revisions from December Meeting in St. Louis, MO/Hoffman Estates, IL
Updated DE128 code “OW” to add associated phrase codes “CS01” and “CS02”.
Added new DE751 codes: “CM”, “CN”, “PGPRES”
Added New DE234 code to existing DE1000 code “MT”: “AL”
Added New DE234 code to existing DE1000 code “QT”: “PL”
Added New DE234 code to existing DE1000 code “ST”: “BR”
Added new DE1000 Code: “QC”
Added “SBCI” – SBC Internet Services to Appendix B – Pseudo-CIC.
Modified Column Headers for “Description” to include the Date Element number being
described.
09/02 Revisions from September Meeting in Las Vegas, NV
Updated DE128 code “11” to add associated phrase codes “AAN”, “NAN”, “NATN”.
Updated DE128 code “OW” to add associated phrase code “BOPI”. Added DE128
code “V0” and associated phrase code “BULKVER”
Added new DE751 codes: “BSVC”, “CH”, “CI”, “CJ”, “CK”, “CL”, “DAT”, “ITYP”, “PCT”,
“PPT”, “RP”, “TA”, “TTYP”
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added New DE234 codes to existing DE1000 code “QT”: “MAXB”, “MDPK”, “MTER”
Added New DE234 codes to existing DE1000 code “SD”: “IEM”, “IY”, “IYN”, “IYS”
Updated verbiage for existing code “1610” under existing DE235 code “SV”
Added new DE1000 Codes: “0P”, “3P”, “4P”, “8P”, “8V”, “A0”, “A1”, “A2”, “BW”, “BZ”,
“C0”, “C7”, “C8”, “C9”, “CZ”, “EK”, “FW”, “FY”, “GC”, “GR”, “GS”, “ID”, “IE”, “IV”,
“KG”, “L8”, “LV”, “LW”, “MF”, “MN”, “MQ”, “MW”, “MY”, “MZ”, “N1”, “N2”, “N3”, “NE”,
“NG”, “NK”, “OM”, “QM”, “R2”, “R5”, “UU”
Added standard DE234 Verbiage “For CABS billing applications, see current issue of
CABS BOS Specifications for a list of valid values” to existing DE1000 codes: “BA”,
“RP”
06/02 Revisions from June Meeting in Fairfax, VA
Updated DE128 code “82” to add associated phrase code “CODEDES”
Added new DE751 codes: “CG”, “PROJIND”, “TNE”
Added new DE234 codes to existing DE1000 code “DC”: “LM”, “ML”, “MM”
Added new DE234 codes to existing DE1000 code “SD”: “IAMA”, “IAME”, “IEMA”,
“IEME”
Added new DE234 codes to existing DE1000 code “ST”: “PP”
Added new DE1000 codes: “CW”, “C6”, “FO”, “KB”, “VI”
Updated existing definitions for DE1000 codes: “HY”, “VC”, “VP”
Added new code for DE1301: “FUR”
Changed “MCI” to “Worldcom” in Appendix B for I222
03/02 Revisions from March Meeting in St. Louis, MO
Added new values to DE150 code list: “CRS”, “DDF”
Added new DE234 codes to existing DE1000 code “AR”: “SOACT”
Added new DE234 codes to existing DE1000 code “AS”: “F”
Added new DE234 codes to existing DE1000 code “QT”: “TST”
Added new DE234 codes to existing DE1000 code “ST”: “E911”
Added new DE352 code for DE128 value “2I”: “VSRNO”
Added new DE352 codes for DE128 value “12”: “BAN”, “VAN”
Added new value to DE560 code list: “NREG”
Added new DE751 codes: “POTSSPLITLOC” , “TNT”
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added new DE1000 codes: “AR”, “EJ”, “EZ”, “KA”, “KF”, “KL”, “KP”, “KR”, “KT”,
“LJ”,”S5”, “UB”, “UT”, “W1”
Changed all references to US West in Appendix B to Qwest.
12/01 Revisions from December Meeting in Tampa, FL
Add new DE234 codes to for 235 value “SV”: “0305”, “1250”
Added new DE234 code to existing DE1000 code “DA”: “35”
Added new DE234 codes to existing DE1000 code “QT”: “CCH”, “NR”, “RPL”, “SBCH”,
“SC”, “SUCH”, “TCCH”, “TCH”, “VPL”
Added new DE560 code: “CMPLX”
Added new DE751 codes: “ASGNIND”, “EXP”, “QRYIND”
Added new DE1000 codes: “1P”, “2P”, “FX”,”AZ”,”GT”, “K9”,”RK”, “R0”,”S1”, “S2”
09/01 Revisions from September Meeting in Reno, NV
Added new DE150 codes: “LPA”, “LPP”
Added new DE560 codes: “CPB”, “CPL”, “CPO”, “DSP”, “ND”, “PB”, “SVO”
Added new DE751 codes: “BAI”, “BX”, “BY”, “BZ”, “CA”, “CB”, “CD”, “CE”, “CF”, “LLT”,
“LM”, “MEU”, “NCDEF”, “RTF”, “SSC”, “STATUS”
Added new DE1000 codes: “BI”, “CY”, “D0”, “EO”, “FB”, “GL”, “IG”, “IS”, “K0”, “L4”,
“L5”, “L6”, “L7”, “LK”, “LQ”, “LY”, “MJ”, “MO”, “MR”, “NY”, “OE”, “OW”, “R1”, “R3”, “R4”,
“S4”, “UK”.
Updated DE128 code “82” to add associated phrase code “DCGMU”; code “IX” to add
associated phrase code “RNUM”.
Added valid values to DE235 code “SV”: 2600 – CABS Late Payment Charges
Added valid values to DE1000 code “OC”: D15 – Equipment, H22 – Tax; to code “QT”:
F1DQ - , F2DQ - , REPTRQTY - ; to code “SP”: CP – Commitment Plan Applies
Updated DE1000 code “AD” to remove reference to “Directory Service Request” in the
descriptive definition; updated code “DY” to modify the description.
Added “SBC” – SBC, and “SNET” – SNET to Appendix B – Pseudo-CIC.
06/01 Revisions from June Meeting in Rancho Mirage, CA
Updated DE128 code “82” to add associated phrase code “SOSTATDES”.
Updated DE128 code “IX” to add associated phrase code “LEGNUM”.
Updated DE128 code “OW” to add associated phrase codes “ORDL”, “SON”.
Added new DE751 codes: “BU” and “BV”.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added new DE1000 codes: “AJ” – Primary Interexchange Carrier Apportionment
Factor, “AK” – ACNA/State Indicator, “AO” – Provisioning Activity/Status, “D9” –
Disability Indicator, “F1” – Facility Designation, “F2” – Facility Type, “F3” – Location A,
“F4” – Location Z, “FL” – Foreign Language Indicator, “HG” – Hunt Group Code, “MV” –
Minutes of Use (MOU) type (with associated DE234 values), “NF” – Notification Type,
“NW” – New construction, “OF” – Retrieve Orders, “OO” – Outgoing Only Service Code
(OGO), “QD” – Quick Dial Tone Number, “RY” – Local/Toll indicator (with associated
DE234 values), “UA” – Apportioned Minutes of Use (MOU) Type.
Added valid values to DE1000 code “ST”: 211 – Information Referral, 311 – Non
Emergency, 511 – Transportation Information.
03/01 Revisions from March Meeting in Haines City, FL
Added DE66 code “91” and related code source for OCN (TBWG’s use of this
qualifier).
Updated DE128 code “82” to add associated phrase codes for DE127 (N902):
“APPTINFO”, “DISPNOTES”, “MSDAPT”, “SODETAIL”.
Updated DE128 code “1Q” to add associated phrase codes for DE369 (N903):
“PRESPC” and “RESPC”.
Updated DE235 code “A6” to add associated phrase codes for DE234: “CKT”, “DDA”,
“DID”, “UNI”.
Updated DE235 code “SV” to removed note from associated DE234 value “1750” .
Added new DE560 codes: “ER” – Interstate/IntraLATA, “RR” – Intrastate/IntraLATA,
“TOL” – Toll.
Added new DE751 codes: “FEATDES”, “BT”.
Updated DE751 code “BP” with a note sunsetting the valid values.
Added new DE1000 codes: “AH” – Primary Interexchange Carrier Apportionment ID
(w/ 3 valid values), “CV” – Cable Type Indicator, “DW” – Detect Number, “D8” –
Distinctive Ring Telephone Number, “K8” – Slot Port, “L3” – Local Calling Scope, “MG”
– Migration Indicator, “MU” – Daily Workload for Maintenance Center, “NB” – Nearby
Telephone Number, “NH” – Telephone Number Change, “U5” – Percent Proportional
Usage, “SV” – Service Configuration, “S3” – Status of Service Order, “YP” – Feature
Query Type.
Added “SBCT” – SBC Telecom, to Appendix B – Pseudo-CIC.
12/00 Revisions from December Meeting in Nashville, TN
Added code “4L” to DE128 with code source information.
Updated descriptive information for DE128 code “LU” to differentiate between the uses
for CABS BOS and LSOG applications.
Added new DE150 code “PCR” – Performance Credit.
Added valid values to DE1000 code “DA”: “33” – 555 Business Listing, “34” – 411
Business Listing”.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Added valid value note to DE1000 codes “SA”, “DS”: “For CABS billing applications,
see the current issue of OBF’s CABS BOS specification for a list of valid values.”
Modified description of DE1000 code “SD”.
Updated DE1000 to add codes “AG” – PICC Apportionment Factor Application
Indicator, “BP” – BIP (Border Interconnection Percentage), “BQ” – Supplemental BIP
(Border Interconnection Percentage), “P0” – Pricing Plan Type Indicator, “P9” –
Pricing Plan Level Indicator, “PU” – PIU Source Indicator, ‘UP’- Percent Local Usage,
“U1” – USOC Specific Percent Local Usage, “U2” – USOC Specific Percent
Intrastate/interLATA Usage, “U3” – USOC Specific Percent Interstate/interLATA
Usage, “U4” – USOC Specific Percent Intrastate/intraLATA Usage
09/00 Revisions from September Meeting in Norwood, WA
Added code “42” to DE66 with code source information.
Added new DE150 codes “DSP” – Dispute, and “PEN” – Penalty.
Added new DE560 codes “RESEC” – Resolved-Exchange Carrier, “UNRES” –
Unresolved, “RESCUS” – Resolved-Customer
Updated DE1000 to add codes “AQ” – Type of Account, “FA” – Facility Charge Type
Indicator, “LH” – Late Payment Charge Applicability/Impact Indicator,”NT” – Shared
Line Telephone Number, “PG” – PICC Capacity Type Indicator Channels, “PH” –
PICC Capacity Type Indicator Trunks, “PJ” – PICC Capacity Type Indicator Lines,
“PY” – PICC Application Indicator, “PZ” – PICC CENTREX Indicator, “RH” – Rate
Category Indicator, “RJ” – Rate Zone.
Modified description of DE1000 codes “AF”, “AX”, “TK”.
Added valid values to DE1000 code “DA”: “30” – 555 Name/Address, “31” – 411
Name/Address, “32” – “Business Listing”
Removed valid value “H22” – Discount, from DE1000 code “OC”.
Added new valid values to DE1000 code “AX”: “LI” – Link, “LA” – Local, “IT” –
Interconnection Trunking.
Added new valid values to DE1000 code “CL” : “M” – Measured Rate Residence, “F”
– Flat Rate Residence
Added new valid value to DE1000 code “DC”, “C” – Combination of Originating and
Terminating.
Added valid value note to DE1000 codes “RS”, “SG”, “TT”: “For CABS billing
applications, see the current issue of OBF’s CABS BOS specification for a list of valid
values.”
Please report any errors or inconsistencies found in this document to the EDI Guideline
Consistency Subcommittee Chair via FAX or Email at the addresses listed below;
December 2014
EDI GUIDELINE
GENERAL SECTION
FAX To:
INDUSTRY CONVENTIONS
ASC X12 Version 004050
1-202-393-5481 (ATIS Secretariat), ATTN: EGCS Chair
or
Email To:
December 2014
ATIS Secretariat, www.atis.org
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
ERRATA Sheet
Items not included in Summary for June 2003 and changed in 10.4.
Sequenced the DE1000 qualifiers “FN” and “FO” into the proper order.
Items not included in Summary for March 2002 and changed in 10.4.
Changed all references to valid values for DE234 for CABS Billing application to the
following to make them consistent: “For CABS billing applications, see current issue of
CABS BOS Specifications for a list of valid values”.
Changed ASC X12 version from 4020 to 4030.
Hyphenated DE234 CODE “RPETRQYT” for DE1000 value “QT”.
Items not included in Summary for September 2001 and changed in 10.4.
Changed "SWBT" in the Appendix B to say "Southwestern Bell Telephone".
Created separate entry for LTEXT in alphabetic sequence under list of phrase codes
associated with DE128 qualifier "82". The phrase codes "LISTTEXT" and "LTEXT"
had been listed together.
Added following verbiage to note on DE235 qualifier "WJ": "For implementations
based on X12 version/release prior to 004020 use "ZZ" instead." Removed valid
values list from qualifier "ZZ".
Added definition to DE751 code "RSUIND".
Put DE1000 codes "AO" and "AP" into alphabetic sequence.
Items not included in Summary for June 2001 and changed in 10.4.
Removed the following verbiage from DE128:
OBF Maintained Code Values for N9 and REF Segments.
Code values to be used in the N9 Loop at the Header and Detail levels for remarks, notes, error
messages, directory listings and directory captions, etc. N901 contains codes of 1Q, 82, H7, L1,
etc. and N902 contains the codes of ERR, YPH, ACC, etc. and N903 contains the OBF Field
Identification (FID) code, when applicable. The text information for the associated N9 segment, if
any, would be carried in the MTX (004020 or above) or MSG (prior to 004020) segment
subordinate to the N9.
Codes values to be used in the REF02 with REF03 containing the OBF Field Identification (FID)
codes.
Added the following verbiage to DE128:
Codes listed here are those for which:
 OBF maintains a list of associated "phrase codes" for use in REF02, REF03, N902 or N903
which are listed with the qualifier;
 OBF's use of the qualifier requires the use of values maintained by an external source.
Amended the last sentence in the opening paragraph as follows (changes are
underlined):
"DE128, DE235 and DE1104 contain code lists that are subsets of ASC X12 maintained code
lists for which either OBF maintains associated phrase codes and values, or, associated values
are found in an external codelist."
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
Corrected the definition on DE235 code "ZZ" to the X12 definition "Mutually Defined".
This should have been done at the time the code was restored to the list (see Errata
for March 2001).
Items not included in Summary for March 2001 and changed in 10.4.
Changed all occurrences of "premise" to "premises".
Corrected miscellaneous spelling errors and inconsistencies in capitalization.
Corrected designation for phrase code "LECODE" associated with DE128 code "1Q"
from N902 to N903.
Restored DE235 code "ZZ" which was removed in error in the December 1998
version when code "WJ" was added.
Items not included in Summary for December 2000 and changed in 10.4.
Corrected miscellaneous spelling errors and inconsistencies in capitalization.
Removed the phrase "(formerly Bellcore)" from all references to Telcordia
Technologies.
Changed all occurrences of "(Code Source #)" to "(X12 Code Source #)" where "#" is
the X12 code source number.
Added code source for DE1000 code "LA" - Local Access Transport Area (LATA).
Updated code source information for DE1000 code "DB" - Directory Book Code.
Deleted the following note and changed all references to it to refer to Note 1:
Note 2: This code is to be used only temporarily to meet mandated changes. A request for a new
code should be completed within 90 days.
Deleted the following note and changed all references to it to refer to Note 1:
Note 4: Locally defined codes for temporary use in order to respond to regulatory rulings prior
to formal approval process.
Renumbered the following note from 3 to 2 and changed all references to it to refer to
Note 2:
Note 3: This code is not valid when used with ASC X12 Release 3030 or higher.
Renumbered the following note from 5 to 3 and changed all references to it to refer to
Note 3:
Note 5: These codes are only valid with ASC X12 Release 3040 or higher.
Renumbered the following note from 6 to 4 and changed all references to it to refer to
Note 4:
Note 6: These codes are not valid with ASC X12 Release 3040 or higher.
Renumbered the following note from 7 to 5 and changed all references to it to refer to
Note 5:
Note 7: These codes are only valid with ASC X12 Release 3050 or higher.
Renumbered the following note from 8 to 6 and changed all references to it to refer to
December 2014
EDI GUIDELINE
GENERAL SECTION
Note 6:
Note 8:
INDUSTRY CONVENTIONS
ASC X12 Version 004050
These codes are not valid with ASC X12 Release 3050 or higher.
Renumbered the following note from 9 to 7 and changed all references to it to refer to
Note 7:
Note 9: These codes are not valid with ASC X12 Release 4010 or higher.
Renumbered the following note from 10 to 8 and changed all references to it to refer
to Note 8:
Note 10: These codes are only valid with ASC X12 Release 4010 or higher.
Renumbered the following note from 11 to 9 and changed all references to it to refer
to Note 9:
Note 11: These codes are only valid with ASC X12 Release 4020 or higher.
Items not included in Summary for September 2000 and changed in 10.4.
Corrected definitions for DE560 codes which had been truncated in error:
17 - Multi-Listing
18 - Multi-Listing by appointment
Inserted DE560 codes previously omitted in error: "IA" - Intrastate; "IR" - Interstate.
Inserted DE1000 code "IA" previously omitted in error.
Corrected valid value entry for DE1000 code "DA" - second occurrence of "28" - 411
Information Call Completion, changed to "29" - 411 Information Call Completion.
December 2014
EDI GUIDELINE
GENERAL SECTION
INDUSTRY CONVENTIONS
ASC X12 Version 004050
ATIS-0403104-0002
EDI Guideline Section 10.4
Is an ATIS standard developed by the Billing and Record Exchange Committee under the ATIS Ordering
and Billing Forum (OBF)
Published by
Alliance for Telecommunications Industry Solutions
1200 G Street, NW, Suite 500
Washington, DC 20005
Copyright © 2013 by Alliance for Telecommunications Industry Solutions
All rights reserved.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise,
without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS
is online at < http://www.atis.org >.
December 2014