CCNA3 Practice Lab 2
Objectives
1. Create and verify a basic switch configuration.
2. Configure port security on FastEthernet ports 0/6 and 0/12.
3. Create multiple VLANS, name them and assign switch ports to them.
4. Configure the VTP protocol and establish the VTP server and client switches.
5. Create an 802.1q trunk between the two switches to allow communication
between paired VLANs.
6. Test VLAN functionality by moving a workstation from one VLAN to another.
7. Identify and troubleshoot any network connectivity issues that may arise.
1-1
CCNA 3: Switching Basics and Intermediate Routing v3.0
Copyright  2003, Cisco Systems, Inc.