EXPERIMENTER'S KIT Includes fiber optic components, cable, lab manual and experiments that can be breadboarded. Part No. 3200OK100 • Price: $8.95 COMMUNICATION KIT Easy to assemble, digital link. This kit contains receiver and transmitter PC Boards. 555 based on board oscillator. Frequency range 100Hz to 10KHz. Includes fiber optic devices, cables and connectors. Part No. 3200RSR721 • Price: $14.95 FIBER OPTICS FIBER OPTIC CABLE • Plastic µm core • Typical attenuation .2db/meter (@650nm) Part No. Description 2705FBS1M 2705FBS10M 2705FBS100M 2705FBS500M 2705FIBOPT-D Simplex Plastic 1 Meter Simplex Plastic 10 Meter Simplex plastic 100 Meter Spool Simplex Plastic 500 Meter Spool Duplex Plastic Per Foot 10+ $0.60 5.50 45.00 165.00 0.70/ft. FIBER OPTIC LAB MANUAL AND LAB KIT OPTICAL AUDIO LINK Easy to assemble voice link. Transmitter and receiver on separate PC boards. Great for learning the basics of fiber optic communications. Includes fiber optic devices, cable and connector. Requires 2 – 9V batteries (not included). Features: 7 Experiments, Final Design Project, Glossary, Research Projects. Lab Manual is a complete 60 page technical manual, written in an easy to understand style. It contains 7 ready to use experiments – Making a Light Pipe; Fiber Cable Transmission; Splices; Connectors and Terminations; Speed of Opto-Electronic Devices; Fiber Optic Transmitters; Fiber Optic Receivers; Star Coupler; Final-Design Project. Part No. 3200OK726 • Price $13.90 SCIENCE PROJECT KIT Learn fiber optics by experimenting and building projects with no prior experience needed. The practical 224page text has theory, 8 experiments and 5 projects. After completion of this kit several useful projects will have been constructed, such as an analog voice link, and a light pen. Part No. Description Prices 32FBLM 32FBLMKIT 32IFMLA Lab Manual only Lab Manual w/ Kit Answer Guide $14.90 43.95 7.95 Part No. 3200FBIFE33 • Price: $46.00 DESIGNER KITS FIBER OPTIC CLASSROOM AND LAB COURSE MODEL IF-SD11 (SIMPLEX KIT) MODEL IF-DD11 (DUPLEX KIT) This is a 10-to-15 week course put together to fill the needs of vocational schools and universities in fiber optics. Basic understanding of electronics and mathematics is suggested. Course includes a text for classroom or lecture, lab manual for student experiments, and lab kit with all required components. Part No. 1-9 $0.75 6.25 50.00 185.00 0.80/ft Prices 32FBSC11$95.00 32FBSC11-IN (Instructor's Edition) 135.00 FIBER OPTIC MINI COURSE This course is a package that can be integrated into any electronics class. Beginning with history through system design and applications. Covers industrial and communication applications. The “Instructor’s Edition” contains an additional reference book, answer guide, overhead transparencies, 10 demo pieces and the regular curriculum. “Creative-friendly” kits for technicians, experimenters, scientists and enterprising students who require prototypes or special-purpose interfaces requiring fiber optics capabilities. This very lowcost “active link” requires a single +5 volt supply and interfaces with all TTL/CMOS logic. It includes 10 meters of 1000 µm optical cable; efficient dry, non-polish connectors, bulkhead interfaces, and splices; integrated detector(s) and emitter(s); and top-quality printed wiring boards. Full instructions and technical data sheets complete the package. Part No. Description Price 3200FBSD11 3200FBDD11 Simplex Kit (Single Channel) Duplex Kit (Bi-directional) $66.00 125.00 FIBER OPTIC SPLICE KIT Part No. Description Prices 32FBMC10 Fiber Optic Mini Course $36.95 A complete package for extending or mending the jacket 1000µm plastic fiber. Kit contains all retention clips, fiber sleeves, and assembly instructions to complete ten splices. No polishing, adhesives, or special tools required. Part No. 06FBCS10 • Price: $9.25 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 211 FIBER OPTICS FIBER OPTIC TOOL KIT OPTICAL VOICE LINK This kit includes all the tools needed to work with all plastic optical fibers and termination types: MODEL IF-OVL-K (KIT) MODEL IF-OVL-A (ASSEMBLED) • Jacketed and unjacketed, diameters ranging from .25 to 3 mm, single strands or multi-fiber bundles • Polishing, simple cutting or hot knife terminations • Connector-less or connectorized Kit contains fiber optic stripper, hot knife, universal fiber cutter, water dispenser, rubber pad, 600 grit and 3 µm polishing film, replacement blades, ST fiber polishing puck, rugged storage container and instruction sheet. Part No. 06FBIFTK4 • Price: $125.00 The Fiber Optic Demonstration System is a state-of-the-art fiber optic technology module. This tried and proven academic module comes complete and ready to use. This curriculum recently has been revised and rewritten to include the latest in the rapidly changing fiber technology field. Additions to the curriculum include: Fusion splicing techniques Fiber connector technology Optical power splitters Wavelength division multiplexing • Fiber termination tools and procedures • Fiber optic testing and test equipment • Historical and technical reading assignments • Hands-on working experience and experiments with fiber optics and associated components • Problem solving and student worksheets • Team activities • Homework and investigative research • Web fiber optic tours and projects Hands-on activities immerse students in the technological aspects of: Part No. 32IFDS100G 32IFDS100C 212 Science projects Home projects for hobbyists Short, audio fiber optic curriculums for schools Inexpensive classroom demonstrations Hands-on practical industrial training Voice transmission in critical electrical isolation applications The Optical Voice Link can be extended up to 60 meters. Kit includes: printed wiring boards, switches, electronics, microphone, 8 ohm speaker, three meters of plastic fiber cable, an uncomplicated tutorial, and step-by-step assembly instructions. No prior fiber optics experience, special tools or training are needed to build, use and enjoy the multiple applications of this kit. Some experience with soldering is recommended for completion of the unassembled version. The curriculum manual is precisely formatted into 10 independent activities in 144 pages with more than 60 real-owrld illustrations and industry photos. An extensive list of references and a working glossary of fiber optic terms is included. Each activity includes: • Voice transmission over fiber • Analog and digital data transmission • Morse Code over fiber optics • Optical fiber characterization The Optic Voice Link is designed to meet a wide variety of educational, commercial, and industrial applications, including: • • • • • • FIBER OPTIC DEMONSTRATION SYSTEM • • • • For students and experimenters alike, the Optical Voice Link is the ideal introduction for those first learning about the marvels, mysteries, and science of light transmission through optical fiber. There is something fascinating, indeed, about hearing your own voice, after it has been converted into light and then coupled into, through and out of an optical fiber. • Fiber sensors and applications • Bending losses in optical fibers • Optical fiber termination and polishing • Attenuation in optical fiber Description Demonstration System Glass Version Student Manual Price $850.00 29.00 PART NO. 32IFOVLK 32IFOVLA DESCRIPTION Kit Assembled PRICE $49.95 85.00 ADVENTURES IN FIBER OPTICS KIT Introductory fiber optic technology kit. Contains 5 unique projects: • Image Magnifier • Lighted Constellation Map • Fiber Optic Wand • Fluorescent Holiday Wreath Features 20 different experiments including: • Bending a light guide • Fluorescence • Tyndall’s Prestigious Experiment • Special Fiber Optic Lighting • Art of Polishing Glass • Making Your Own Image Conduit. Kit comes complete with penlight, rubber light hood, 6 different optical fiber types, Ulexite fiber optic rock, 3 coherent fiber optic components, color filters, lens, star/constellation map, polishing film and other miscellaneous components Part No. 32IFE60 • Price: $36.00 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 FIBER OPTICS FIBER OPTIC KIT ANALOG AND DIGITAL COMMUNICATION KIT An ideal kit for high school and technical instructors who require the ability to demonstrate analog and digital fiber optics communications principles with a single, economical product. When assembled, the kit provided a unique arrangement of dual-purpose analog and digital transmitter and receiver modules. The transmitter is a user-selectable design with an on-board microphone for an audio analog signal source and a built-in 15 Hz oscillator for digital signals. it also has input connections for external analog and CMOS-compatible signals. Unlike other fiber optic kits, this one requires no oscilloscope and is powered by two 9-volt batters (not included). Part No. 3200IF545 • Price: $54.95 UNJACKETED FIBER This versatile fiber is particularly suited to simple illumination and demonstration applications such as illuminated maps, lights for model railroads / airplanes, Christmas tree lighting and embroidering into fabric. It is PMMA material, attenuation <400 dB/km @ 660 nm, numerical aperture 0.65. Available in custom lengths or by the spool. Must purchase minimum 10' length. Part No 32IFCU250 32IFCU500 32IFCU1000 32IFCU2000 Diameter (µm) 250 500 1000 2000 Price $0.25 / Ft. 0.25 / Ft. 0.30 / Ft. 2.50 / Ft. UNIVERSAL MICROSCOPE FOR FIBER CABLE FIBER OPTIC TOOL KIT GREAT VALUE $ 13500 (10+) 10 15 13 14 9 8 7 4 11 1 12 5 6 3 2 Kit Contents: 1. Fiber optic crimp tool 2. Precision stripper 3. Kevlar cutter 4. Carbide scribe 5. ST polish disc 6. SC polish disc 7. Epoxy application syringe 2 pieces 8. Two part epoxy for connectarization 9. Glass working pad 6" x 8" 10.Rubber working pad 6" x 6" 11. Cleanser 12.Fiber optic wipes (wet and dry) 13.6µm brown diamond polish film 4" x 4" 14.1µm purple diamond polish film 4" x 4" 15.0.05µm white alum. oxide polish film 4" x 4" Includes most commonly used tools in crimping SC, ST type connectors to glass fiber optics cable. Part No. 3200FOPTK 1-9 $140.00 10+ $135.00 FIBER OPTIC CABLE GLASS / SIMPLEX Standard 62.5/120µm multimode (MM), simplex glass fiber cable. Orange color outer jacket with 2.9mm diameter. Provided with an ST, SC and FC universal faceplate. Insert ferrule into the microscope and inspect the end surface. This 100X microscope is perfect for multimode connectors. Part No. 08FI9786 • Price: $69.00 Part No. 2705FOPG1 • Price: $0.40/meter ST/SC CONNECTORS ST Style FIBER CONTINUITY TESTER Universal Tester (ST, SC and FC) connect your ST, SC, FC connector to the adapter and push on/ off button. The red LED light is transmitted down the fiber, providing easy identification at the other end. Part No. 01FBLP • Price $39.50 These connectors for glass fiber come with a 2.5mm ferrule. Available for multimode cable, these connectors feature reliable, durable field installation. • Zirconia ferrule • Fiber size 125µm (multimode) Part No. 08FI0066 08FI3066 Style ST SC Price $2.45 3.25 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 213 FIBER OPTICS FIBER OPTIC TRAINING CDS FIBER OPTIC POWER METER • • • • FIBER OPTIC TECHNOLOGY SERIES Simple optical power and loss measurements 55db dynamic range Single pushbutton zero reference 2.5mm universal adapter (ST, SC and FC) Part No 01PM100-S 01PM100-G Description Meter with Si Detector Meter with Ge Detector Please see our website at http://www.elexp.com/trn_w4lk.htm for details of various titles. Price $177.00 299.99 FIBER OPTIC TEST SET A versatile and rugged fiber optic test instrument specifically designed for use with plastic optical fiber. It features capabilities for • Performing fiber continuity checks • Measuring fiber output power • Calibrating and screening detectors • Measuring LED power • Measuring fiber attenuation The Fiber Optic Test Set uses a silicon photodetector to measure optical power which is calibrated at the two most commonly used wavelengths in plastic fiber — 660 (red) and 850 (infrared) nanometers. Optical power displayed in easy-to-read 3 1/2 LCD display which can be set in four different power ranges. The detector and LED are both housed in industry-standard ST female input connectors. The connectors permit measurements with any plastic fiber in an ST male connector or connector-less fiber with an outer diameter of 2.5 mm or less. Part No. 01IFFOM • Price: $245.00 DIGITAL PHOTOMETER OPTICAL POWER METER MODEL IF-PM A versatile and economical classroom tool for measuring power levels of laser beams, demodulating optical signals for audio applications and solar experiments. Photometers are essential equipment in any principles-of-technology or inschool research program. The battery power and portability of this model offer particular flexibility. The photometer is powered by two standard 9-volt batteries and offers 4 digital measurements scales from 20 microwatts through 20 milliwatts. It demodulates optical signals up to 10 kHz and provides a DC analog output through standard banana jacks. (The analog output can be connected to a strip chart recorder for solar monitoring or to an oscilloscope for observing optical signals. The photometer will also act as an audio receiver to demodulate laser signals, which are also output to the analog jacks.) Photometer comes complete with storage container, optical stand for the detector, instruction manual and batteries. Part No. 32IFPM • Price: $185.00 214 Length TITLE (min.) Plastic Optical Fiber History of Fiber Optics Fiber Optic Applications Introduction to Fiber Optic Theory & Fiber Structure 31W5LJ Fiber Optic Safety 31W5LC Fiber Optic Cable 31W5LG Fiber Optic LEDs, Lasers & Detectors 31W5LI Fiber Optic Installation 31W5LH Fiber Optic Couplers, Switches & Isolators 31W5LM Dense Wavelength Division Multiplexing 31W5LD Fiber Optic Connectors, Connectorization & Patch Panels 31W5LN Fiber Optic Testing, Troubleshooting & Documentation (F14650CDR) 31W5LR Fiber Optic System Design 31W5LS Fiber Optic Splicing & Splicing Closures (F13000CDR) CD Part No. 31W5LK 31W5LP 31W5LF 31W5LB Price 23 $99.95 35 99.95 43 99.95 35 99.95 26 17 37 99.95 99.95 99.95 41 30 99.95 99.95 34 99.95 30 99.95 30 99.95 30 30 99.95 99.97 FIBER OPTIC DEMONSTRATOR SET Demonstrate the basics of light transmission with two specially formulated Lucite bars — one curved and one straight. Light beams can be seen trapped and reflecting down the straight bar as well as around the bend in the curved bar. Laser source required to create light beams. Part No. 08IF547 • Price $69.00 FIBER OPTIC SPLICE/CONNECTOR It utilizes cinch nuts, alignment principles and no-fuss fiber terminations to quickly handle the three most common requirements for joining two fiber lengths: • Replacing damaged fiber segments. • Combining two different fiber lengths. • Bulkhead or patch panel connections. The connector can be used with index-matching gel, for reducing Fresnel reflection losses, or without gel for quick and easy connections. It does not require that the jacket be stripped. Part No. 08IFCS4 1-9 $9.50 10+ $8.95 INFRARED DETECTION CARDS Now available are indicator cards for converting 850 nm infrared light to the visible spectrum. You will be able to visually detect the presence of infrared light when it is shined upon the active area of the card. Active area is 2.54 x 2.54 cm. Part No. 08IF850050 1-9 $19.50 10+ $19.00 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 INSPECTION MICROSCOPE Insert any 2.5 mm fiber ferrule into the microscope, turn on the light and inspect the end surface with ease. The microscope is provided with an ST®, FC and SC universal faceplate. It is perfect for all multimode plastic and glass fiber, plus it is easy to use. An exceptional value. FIBER OPTICS “TRI-HOLE” FIBER OPTIC STRIPPER • Three-hole design performs all common fiber optic stripping functions in one tool — Standard 250 to 125 micron stripping — Remove 900 tight buffer to 250 micron buffer coating — Hole for removal of 2 to 3 mm fiber jackets • Cutting surfaces are precision formed, hardened, tempered and ground for precise buffer removal • Prevents scratching or nicking of optical fiber • Coil return spring Part No. 08IF370050 • Price: $89.00 FIBER POLISHING KIT Specifically formulated to ensure precise polishing of plastic fiber tips. Contains full instructions with diagrams and two sheets 10 x 14cm of 2000-grit and 3µm polishing film. Part No. 0602FO103T250J Price $26.50 Part No. 08IFCPK • Price: $7.50 FIBER OPTIC STRIPPER ST® POLISHING PUCK Used for stripping 250 micron coating from fiber optic cable down to the 125 micron glass fiber without any nicks or scratches. At last! A polishing disk for terminating ST® fiber connections and one whose capabilities match the economy and utility that are available in hundreds of plastic fiber terminations. The injection molded plastic disk is tough, durable and super-low in cost, and is limited to approximately 100 polishes. The metal disk is slightly more in cost, but is also more durable and capable of performing 1000+ polishes. Part No. Description 08IF370041 Plastic Polishing Puck 08IF370042 Metal ST® Polishing Puck Price $8.50 86.00 ST® STYLE CONNECTOR Designed specifically for the installer who demands fast and easy assembly, top optical performance and low cost. The durable connector has metal housing with hard stainless alloy ferrule and polishes quickly. The connector’s rear design crimps directly on the cable jacket, eliminating cable pull-away from the connector. The ST® connector is supplied with a 3mm boot. Stainless steel ferrule, fiber size 1000µ (ideal for plastic fiber), typical loss .5db Part No. 08IFCST • Price: $4.20 FIBER OPTIC CRIMP TOOL Fiber optic connectors call for precision crimping to attached their sleeves to the fiber cable for maximum strength. The IFO crimp tool is designed to precisely assemble our low cost ST® fiber terminations to the 2.2 mm OD jacket on standard communications plastic fiber. Tool die has four crimp slots (inches): .128 hex, .141 round, .151 hex and .190 hex. Part No. 08IF370045 • Price: $55.00 Part No. 0602JIC125 • Price: $23.75 FIBER STRIPPER NO-NICK® The no-nick stripper is the most commonly used fiber stripper in the industry. Will not nick the fiber cladding and cause light leakage. Precision-ground blade crushes the fiber jacket for easy removal. For use with 1000 µm core fiber with 2.2 mm OD jacket or smaller. Part No. 08IF370015 • Price: $59.00 HOT KNIFE An inexpensive tool for producing clean cuts through plastic fiber of all types and diameters as an alternative to polishing. Used like a soldering iron or wood burning tool. The 25-watt heating element plugs into a standard 110 VAC 3-prong outlet and has 4-foot cord. Replacement blades are standard X-ACTO® type. Part No. 08IF370011 08IF370012 Description 25W Iron 60W Iron With Brass Cutting Edge Price $21.95 95.00 DISPOSABLE FIBER CUTTER This versatile, inexpensive and easy-to-use fiber cutter. The cutter features aperatures for cutting fiber such as: • 750 and 1000µm simple and duplex jacket fibers. • 750 and 1000µm bare fibers. • 16-fiber light guides. A perfect tool for installations where a technician may need to make only a few terminations. Part No. 08IFFC2 1-9 $4.90 10+ $4.40 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 215 SOLAR PRODUCTS SOLAR BATTERY CHARGER W/METER AND LIGHT • Designed with a meter lamp head, equipped with a meter together with a lamp (bulb) • Solar battery charger is designed for charging 2 pcs “AA”, “AAA”, and “C” rechargeable batteries • The charger is equipped with a meter with 3 unique features, (1) strength of the sunlight, (2) strength of the power output from the solar panel, and (3) how long it takes to fully charge the batteries • Meter can register sun power up to 160mA • Reverse blocking diode is built into the circuit Part No. 1-9 10+ 08SLC31 $18.50 $16.95 SOLAR PANEL FOR 12V RECHARGEABLE BATTERY Built-in diode, wires with alligator clips. Panel comes with stand • Power (Max): 2.88W • Voltage Voc: 18V • Current (Max) Isc: 160mA • Cell Size (mm): 25x25 • Cells in Series: 36 • Panel Size (mm): 159x278x17 • Weight: 18 oz. SOLAR WOODEN MODEL KITS Part No. 08SLC33 1-9 $59.90 10+ $57.90 SOLAR PANEL 3, 6, 9, 12V Part No 08SLC21 08SLC22 08SLC23 Description Gramophone with Music Helicopter with Motor Airplane with Motor 1-9 $9.95 9.95 9.95 10+ $8.95 8.95 8.95 RECHARGEABLE SOLAR TRANSFORMERS 7-IN-1 Features all snap together plastic parts (no screws, tools required), solar panel and accessories. It is incredibly easy to assemble the 7 different modules: 2 power charging stations and 5 different vehicles. The transforming rechargeable station has 2 output plugs; one for solar recharging and the other for battery recharging. Amazingly, the battery charging station can bring the selected unit to full power in about 5 seconds and the solar recharging station will fully recharge in approximately 120 seconds. The fun time - run time is approximately 50-80 seconds. Provides 3, 6, 9, 12V volt solar panel output to power small devices. Includes “AA” battery charger, a pair of mini alligator clips, and a multi-connector plug. 3/16" thick. Part No. 08SLC26 • Price $15.95 SOLAR PANEL KIT 30W This do-it-yourself system can product 30W. • Array of 12 (5"), 2.5W monocrystalline solar cells • Custom-milled base panel with a protective recess for each cell • Daisy-chain multiple units for higher voltage/current/power output • Kit Contents: 13 pak of solar cells, base and cover panel, flux pen, cell tabbing wire, adhesive backed flat copper bus-bar wire, polycarbonate cement, disposable gloves • Dimensions: 23.8" x 15.8" x .375" after assembly Part No. 08PX33000 • Price: $149.00 Part No. 32OWIMSK640 • Price: $28.95 SOLAR BULLET TRAIN SOLAR BATTERY CHARGER FOLDING PANEL 6V@200MA All Aboard the fastest train under the sun! OWI is proud to introduce their Solar Bullet Train mini solar kit. This kit entices students and train enthusiasts alike to learn about the environmental benefits of renewable energy. Two interlocking cars attach to the engine, allowing young builders to focus on self-motivation, perseverance and manipulation. The Solar Bullet Train is an excellent beginner building kit designed to teach how solar power is used to drive a small motor. Its 18 parts snap together and are secured with only four screws. Train enthusiasts of all ages will enjoy building this amazingly fast eco-friendly train and watch it travel without rails. • C o n v e n i e n t f o r charging appliances / mobile phone • I n c l u d e s f u l l s e t of multi-plug for charging toys, radio / players etc. • With battery compartment for charging 3 pieces of “AA” size rechargeable batteries Part No. 32OWIMSK680 • Price: $12.50 Part No. 08SLC32 216 1-9 $17.50 10+ $16.50 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 SOLAR PRODUCTS SOLAR PRODUCTS SOLAR MOTOR KIT SOLAR CELLS The solar cells are laminated with Includes a solar cell module (1V, 400mA) plus motor and motor clip. Size: 3.7" x 2.6" Part No. 1-9 10+ 08SLC24 $9.50 $8.95 high quality resin material on the PC board with excellent moisture protection. These modules are designed for educational kits or projects. 2mm thick. These can be connected in series or SOLAR MOTOR parallel to increase voltage or current output Part No. 08SLC02 08SLC03 08SLC04 No. of Voltage Current Size Cells/ (Voc) Isc (typ) mm Modules 0.5V 1.0V 1.5V 500mA 250mA 500mA 1-9 10+ 62x46 62x46 62x120 1 2 3 5.95 6.95 12.95 5.50 6.50 11.95 53x109 138x154 10 36 9.50 19.95 9.05 18.95 MINI SIZE MODULES 08SLC07 08SLC09 5.0V 18.0V 60mA 120mA Can be easily driven by solar panel with 1.0V DC output. Part No. 08DCMOTOR Economical, encapsulated solar cell modules. These can be easily connected in series or parallel to increase voltage or current output. 10+ SOLAR TOY MOTOR This can be easily driven by any solar panel with 1.5V DC output. Part No. 29DCM2 SOLAR CELLS 1-9 $1.50 $1.25 1-9 10+ $0.65$0.60 EDUCATIONAL SOLAR ENERGY KIT Voltage Current Size Part No. (Voc) Isc (typ) mm 08SLC15 08SLC16 0.5V 0.5V 400mA 1,000mA 75x45 95x65 1-9 10+ $5.95 7.95 $5.75 7.50 SOLAR POWER TRAINING COURSE Explore various hands-on activities. Includes solar panel, DC motor, plastic wheel and disk. Part No. 08SLC20 1-9 10+ $8.95$8.50 SOLAR EDUCATIONAL KIT MODEL SO-20K The solar cell comes with 8 solar cells, electric motor, propeller, buzzer, light bulb, wire and hard ware. Training manual included. • Solar cell module, when placed under direct sunlight, generates power comparable to batteries. Discover how to harness solar energy and apply to countless practical applications. • Students can do series of do-it-yourself experiments to acquire the basic knowledge of solar energy. They can learn how to: a)Make an electrical circuit. b)Make a solar circuit. c)Learn how to increase voltage. d)Learn how to increase current. Part No. 08SLC27 Part No. 08SLC30 With the Solar Power Training Course you will learn how sunlight can be converted into electricity. Some projects are: • Make a solar circuit • Make an electrical circuit • Learn how to increase voltage • Learn how to increase current • Learn how to make a solar panel • Use solar power to produce the energy for a radio, calculator, battery charger or 1.5V cassette player 1-9 $18.95 10+ $17.95 1-9 $12.95 10+ $12.25 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 217 LASER / FIBER OPTICS THERMAL FIBER OPTIC STRIPPERS FIXED BLADE & ADJUSTABLE MODEL TSAB-125 - FIXED BLADE MODEL TSAB-40 - ADJ. BLADE WBS LASER THE MOST VERSATILE LASER ON THE MARKET! • Voice communications • Digital line-of-sight communications • AM/FM radio transmission • Video from camcorder • RF video from VCR to receiver to TV In addition, this laser can be used to conduct regular laser, optics and fiber optic experiments. FEATURES: • Semiconductor lasing element and solidstate design for a long, dependable life. LASER RADIATION DO NOT STARE INTO BEAM • Bright 635 nanometer laser light output. • Standard RCA-type input jacks. PEAK POWER 1 mW WAVELENGTH 600-nm • Electrical overdrive protection on all inputs. Class II Laser Product • Bright laser pilot light. • Tamper-resistant screws for safety. • Threaded mounts for holding lenses, filters and diffraction gratings. • Operator’s manual with safety information and common experiments. • Labeling and safety requirements compliants with US CDRH regulations. GROUP PACKAGE: In addition to the WBS Laser, you will also receive a free optical RF video receiver, interconnecting cables, power adapters, and an instruction booklet for setting up a VCR-to Laser-to-Receiver-to-TV link CAUTION Thermal Stripper Fixed Blade Thermal Stripper Adjustable Blade Fitel/Fujikara Style Ericsson Style Holder Holder Thermo-mechanically remove coatings from optical fibers. High strength thermal strippers. Fixed blade Model TSAB-125 supports standard 125um optical fibers, 250um, 400um and 900um coated fibers. Adjustable blade version supports cladding diameters 40um to 1,000um acrylate coated fibers with buffer diameters up to 1200um. Universl Clamp Heater adjustable to 200` C and facilitates stripping difficult, baked on coatings. Adjustable temperature and time settings adaptable for a variety of coatings. Compact design. Weighs less than one lb. Includes AC power supply, coard and cleaning brush. Selectable platforms supplied separately. For Fitel, Fujikura and Ericsson fiber holders use the corresponding platforms. For LDF and all others without fiber holders use the Universal clamp. Part No. Description Each 0602TSFB125 Thermal Stripper Fixed Blade $1895.00 0602TSAB40 Thermal Stripper Adjustable Blade 2129.00 0602TSPE125 Ericsson style holder 159.00 0602TSPF125 Fitel/Fujikura style holder 159.00 0602TSUC40 Universal clamp 219.00 218 Part No. 32IFUL08635X • Price: $450.00 COMPLETE LASER COMMUNICATIONS PACKAGE: You will receive all the items above, as well as a microphone, AM/FM radio, patch cords and an audio receiver. Part No. 32IFUL08635Y • Price: $695.00 LIGHT RAY VIEWING KIT The Light Ray Viewing Kit is a small “liquid laboratory.” When used with any lasers it creates underwater light ray patterns and diagrams that constitute the basics of all introductory optic studies. In a complementary series of activities in the accompanying instruction guide, students can observe, and more readily understand, principles and equations such as: • • • • • Snell’s Law Total internal reflection Equal angles of incidence and reflection Brewster’s Angle Critical angle of light Set-up for each experiment requires less than five minutes and costs only a few pennies. (“Just add water!”) Project equipment includes impact-resistant observation tank; four ounces of scattering solution; first-surface mirror; stirring rod; ruler; protractor; and eight full-color instruction guides. Part No. 08IF548 08IF549 Description Complete Kit w/o Laser Complete Kit with 0.5mw Helium Neon Laser Price $95.00 395.00 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065 INTEGRATED CIRCUITS LOGIC 7400 SERIES For 100+ call for quote. Part No. Pins Function 10 10 10 10 10 10 7400 7401 7402 7403 7404 7405 14 14 14 14 14 14 Quad 2-input NAND gate Quad 2-input NAND gate (O.C.) Quad 2-input NOR gate Quad 2-input NAND gate Hex inverter Hex inverter (O.C.) 10 10 10 10 10 10 7406 7407 7408 7409 7410 7411 14 14 14 14 14 14 10 7412 10 7413 10 7414 1-9 10-99 $1.10 0.95 1.70 0.75 1.45 0.95 $1.00 0.85 1.50 0.65 1.30 0.85 Hex inverter buffer/driver Hex buffer/driver (O.C.) Quad 2-input AND gate Quad 2-input AND gate (O.C.) Triple 3-input NAND gate Triple 3-input AND gate 0.90 0.90 1.95 0.90 0.95 1.50 0.80 0.80 1.75 0.80 0.85 1.40 14 14 14 Triple 3-input NAND gate Dual 4-input NAND schmitt trigger Hex inverter schmitt trigger 0.75 0.95 0.95 0.65 0.85 0.85 10 7416 10 7417 14 14 Hex inverter buffer/driver Hex buffer/driver (O.C. H.V.) 1.45 1.25 1.20 1.10 10 10 10 10 10 10 7420 7422 7425 7426 7427 7430 14 14 14 14 14 14 Dual 4-input pos. NAND gate Dual 4-input pos. NAND gate (O.C.) Dual 4-input NOR gate with strobe Quad 2-input NAND gate (O.C.) Triple 3-input pos. NOR gate 8-input pos. NAND gate 0.95 0.80 0.95 0.70 1.05 0.95 0.85 0.70 0.85 0.60 0.95 0.85 10 10 10 10 10 10 7432 7433 7437 7438 7440 7442 14 14 14 14 14 16 Quad 2-input pos. OR gate Quad 2-input pos. NOR buffer (O.C.) Quad 2-input pos. NAND buffer Quad 2-input pos. NAND buffer(O.C.) Dual 4-input pos. NAND buffer BCD-to-dec. decoder 1.70 0.48 0.20 0.45 0.50 1.40 1.50 0.44 0.18 0.40 0.40 1.35 10 10 10 10 10 7444 7445 7446 7447 7450 16 16 16 16 14 Excess 3-Grcy to Dec. BCD-to-dec. decoder/driver BDC-to-7 Seg. decoder/driver (30v out) BCD-to-7 Seg. decoder/driver (15v out) Dual 2-wide 2-input AND-OR-INVERT gate 0.95 1.80 1.95 2.45 0.45 0.90 1.60 1.75 2.20 0.40 10 10 10 10 10 10 7451 7453 7454 7455 7460 7472 14 14 14 14 14 14 Dual 2-wide 2-input AND-OR-INVERT gate Expand. 4-wide 2-in. AND-OR-INVERT gate 4-wide 2-input AND-OR-INVERT gate 2-wide 4-in. AND/OR INVERT gate Dual 4-input expander AND-gated JK master/slave flip-flop 0.45 0.60 0.60 0.60 0.35 0.85 0.40 0.50 0.50 0.50 0.30 0.80 10 10 10 10 10 10 7473 7474 7475 7476 7480 7481 14 14 16 16 14 14 Dual JK flip-flop with clear Dual D-type flip-flop w/preset & clr. 4-bit bistable latch Dual JK flip-flop w/preset & clr. Full Adder Gated 16-bit active element memory 1.90 1.25 2.50 2.75 0.80 0.85 1.70 1.15 2.25 2.50 0.75 0.80 10 10 10 10 10 10 7482 7483 7485 7486 7489 7490 14 14 16 14 16 14 2-bit binary full adder 4-bit binary full adder 4-bit magnitude comparator Quad 2-input XOR gate 64 bit RAM (O.C.) Decade counter 0.80 2.90 1.95 1.50 2.90 2.50 0.75 2.60 1,90 1.30 2.70 2.20 10 7491 10 7492 10 7493 14 14 14 8-bit shift register Divide-by-12 counter 4-bit binary counter 0.98 1.35 1.90 0.95 1.25 1.70 Part No. Pins Function 1-9 10-99 10 10 10 10 10 7495 7496 74107 74109 74121 14 16 14 16 14 4-bit par-access shift register 5-bit shift register Dual JK flip-flop with clear Dual JK pos. edge trig. F.F. Monostable multivibrator $1.90 0.48 0.95 0.85 2.25 $1.70 0.44 0.85 0.65 2.15 10 10 10 10 74123 74125 74126 74132 16 14 14 14 Dual retrig. MS multivibrator Quad 3-state bus buffer Quad 3-state bus butter Quad 2-in-pos. NAND schmitt trigger 1.95 0.95 0.75 0.69 1.75 0.85 0.65 0.58 10 10 10 10 10 10 74136 74145 74147 74148 74150 74151 14 16 16 16 24 16 Quad 2-input XOR gate (O.C.) BCD-to-dec. decoder/driver 10-to-4 priority encoder 8-to-3 priority encoder 16-to-1 multiplexer 8-channel dig. multiplexer 0.60 1.50 3.25 1.20 2.95 0.70 0.50 1.25 2.95 1.10 2.75 0.60 10 10 10 10 10 10 74153 74154 74155 74156 74157 74160 16 24 16 16 16 16 Dual 4-to-1 multiplexer 4-to-16 decoder/demux Dual 2-to-4 decoder/demux Dual 2-to-4 decoder/demux Quad 2-to-1 data selector/mux BCD decade counter 0.90 1.90 0.80 0.45 0.85 0.75 0.80 1.80 0.70 0.40 0.80 0.65 10 10 10 10 10 10 74161 74162 74163 74164 74165 74166 16 16 16 14 16 16 4-Bit binary counter BCD decade counter 4-bit binary counter 8-bit par-out serial shift register 8-bit par. load serial shift register 8-bit par. load shift register 0.85 0.78 0.75 0.85 0.75 0.75 0.75 0.74 0.55 0.75 0.70 0.65 10 10 10 10 10 10 74170 74173 74174 74175 74178 74180 16 16 16 16 14 14 4x4 register file 4-bit D-type register 3-state Hex D flip-flop with clear Quad D flip-flop with clear 4-Bit Shift Register 9-bit odd/even parity gen. checker 0.90 0.95 1.05 1.30 1.95 1.95 0.85 0.85 0.95 1.20 1.75 1.75 10 10 10 10 10 10 74181 74182 74184 74190 74191 74192 24 16 16 16 16 16 Arithmetic logic unit Look-ahead carry generator BCD to Binary Conv. BCD/decade up/down counter 4-bit binary up/down counter BCD/decade up/down counter 2.95 0.90 2.50 2.50 1.45 2.95 2.75 0.85 1.95 2.25 1.20 2.90 10 10 10 10 10 10 74193 74194 74195 74197 74199 74221 16 16 16 14 24 16 4-bit binary up/down counter 4-bit bi-directional shift register 4-bit par-access shift register 4-bit binary counter 8-bit shift register Dual MS multivibrator schmitt trig. 1.95 1.90 0.95 1.25 1.50 1.50 1.85 1.80 0.75 1.15 1.25 1.25 10 10 10 10 10 74251 74273 74365 74367 74390 16 20 16 16 16 8-channel mux 3-state Octal D flip-flop with clear Hex buffer/driver 3-state Hex buffer/driver 3-state Dual 4-bit decade counter 0.95 1.90 0.90 0.90 0.90 0.90 1.80 0.80 0.80 0.80 Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 219 INTEGRATED CIRCUITS IC LOGIC For 100+ call for quote. Part No. Pins LOGIC 74LS SERIES Function 1-9 Prices 10-99 $0.40 0.30 0.45 0.55 0.45 0.55 $0.35 0.25 0.40 0.45 0.40 0.45 10 74LS00 10 74LS01 10 74LS02 10 74LS03 10 74LS04 10 74LS05 14 14 14 14 14 14 Quad 2-input NAND gate Quad 2-input NAND gate (O.C.) Quad 2-input NOR gate Quad 2-input NAND gate Hex inverter Hex inverter (O.C.) 10 74LS06 10 74LS07 10 74LS08 10 74LS09 10 74LS10 10 74LS11 14 14 14 14 14 14 Hex inverter buffer/driver Hex buffer/driver (O.C.) Quad 2-input AND gate Quad 2-input AND gate (O.C.) Triple 3-input NAND gate Triple 3-input AND gate 0.86 0.73 0.45 0.52 0.56 0.55 0.72 0.62 0.40 0.40 0.46 0.45 10 74LS12 10 74LS13 10 74LS14 10 74LS15 10 74LS20 10 74LS21 14 14 14 14 14 14 Triple 3-input NAND gate Dual 4-input NAND schmitt trigger Hex inverter schmitt trigger Triple 3-input AND gate Dual 4-input pos. NAND gate Dual 4-input pos. AND gate 0.40 0.95 0.45 0.45 0.75 0.55 0.30 0.85 0.35 0.40 0.65 0.45 10 74LS26 10 74LS27 10 74LS30 10 74LS32 10 74LS33 10 74LS37 14 14 14 14 14 14 Quad 2-input NAND gate (O.C.) Triple 3-input pos. NOR gate 8-input pos. NAND gate Quad 2-input pos. OR gate Quad 2-input pos. NOR buffer (O.C.) Quad 2-input pos. NAND buffer 0.45 0.75 0.45 0.40 0.24 0.35 0.40 0.65 0.40 0.35 0.18 0.30 10 74LS38 10 74LS40 10 74LS42 10 74LS47 10 74LS48 10 74LS51 14 14 16 16 16 14 Quad 2-input pos. NAND buffer(O.C.) 0.24 Dual 4-input pos. NAND buffer 0.40 BCD-to-dec. decoder 1.05 BCD-to-7 Seg. decoder/driver (15v out) 1.25 BCD-to-7 Seg. decoder/driver 3.75 Dual 2-wide 2-input AND-OR-INVERT gate 0.35 0.18 0.35 0.95 0.95 2.90 0.30 10 74LS54 10 74LS55 10 74LS73 10 74LS74 10 74LS75 10 74LS76 14 14 14 14 16 16 4-wide 2-input AND-OR-INVERT gate 2-wide 4-in. AND/OR INVERT gate Dual JK flip-flop with clear Dual D-type flip-flop w/preset & clr. 4-bit bistable latch Dual JK flip-flop w/preset & clr. 0.45 0.40 1.40 0.45 1.15 2.50 0.40 0.35 1.20 0.35 1.00 2.20 10 74LS83 10 74LS85 10 74LS86 10 74LS90 10 74LS91 10 74LS92 14 16 14 14 14 14 4-bit binary full adder 4-bit magnitude comparator Quad 2-input XOR gate Decade counter 8-bit shift register Divide-by-12 counter 2.15 0.95 0.45 1.70 0.85 1.90 1.95 0.85 0.35 1.45 0.75 1.70 10 74LS93 10 74LS95 10 74LS96 10 74LS107 10 74LS109 14 14 16 14 16 4-bit binary counter 4-bit par-access shift register 5-bit shift register Dual JK flip-flop with clear Dual JK pos. edge trig. F.F. 1.55 1.50 1.25 1.05 0.95 1.35 1.40 1.15 0.95 0.85 10 74LS112 10 74LS113 10 74LS122 10 74LS123 16 14 14 16 Dual JK edge-trig. flip-flop Dual JK edge-trig. flip-flop Retrig. monostable multivibrator Dual retrig. MS multivibrator 0.60 0.58 0.85 0.60 0.50 0.54 0.75 0.50 For 100+ call for quote. Part No. 10 74LS125 10 74LS126 10 74LS132 10 74LS133 10 74LS136 10 74LS138 10 74LS139 10 74LS145 10 74LS147 10 74LS148 10 74LS151 10 74LS153 10 74LS154 10 74LS155 10 74LS156 10 74LS157 10 74LS158 10 74LS160 10 74LS161 10 74LS162 10 74LS163 10 74LS164 10 74LS165 10 74LS166 10 74LS169 10 74LS170 10 74LS173 10 74LS174 10 74LS175 10 74LS181 10 74LS189 10 74LS190 10 74LS191 10 74LS192 10 74LS193 10 74LS194 10 74LS195 10 74LS197 10 74LS221 10 74LS240 10 74LS241 10 74LS242 10 74LS243 10 74LS244 10 74LS245 10 74LS247 10 74LS251 10 74LS253 10 74LS257 10 74LS258 10 74LS259 10 74LS260 10 74LS266 Pins 14 14 14 16 14 16 16 16 16 16 16 16 24 16 16 16 16 16 16 16 16 14 16 16 16 16 16 16 16 24 16 16 16 16 16 16 16 14 16 20 20 14 14 20 20 16 16 16 16 16 16 14 14 Prices Function Quad 3-state bus buffer Quad 3-state bus butter Quad 2-in-pos. NAND schmitt trigger 13-input NAND gate Quad 2-input XOR gate (O.C.) 3-to-8 line decoder/demux Dual 2-to-4 decoder/demux BCD-to-dec. decoder/driver 10-to-4 priority encoder 8-to-3 priority encoder 8-channel dig. multiplexer Dual 4-to-1 multiplexer 4-to-16 decoder/demux Dual 2-to-4 decoder/demux Dual 2-to-4 decoder/demux Quad 2-to-1 data selector/mux Quad 2-to-1 data select/mux BCD decade counter 4-Bit binary counter BCD decade counter 4-bit binary counter 8-bit par-out serial shift register 8-bit par. load serial shift register 8-bit par. load shift register 4-bit up/down synchr. binary counter 4x4 register file 4-bit D-type register 3-state Hex D flip-flop with clear Quad D flip-flop with clear Arithmetic logic unit 16 x 4 static ram 3-state BCD/decade up/down counter 4-bit binary up/down counter BCD/decade up/down counter 4-bit binary up/down counter 4-bit bi-directional shift register 4-bit par-access shift register 4-bit binary counter Dual MS multivibrator schmitt trig. Octal buffer/line driver 3-st. Octal buffer/line driver 3-st. Quad bus transceiver Quad bus transceiver 3-st. Octal buffer 3-st. Octal bus transceiver 3-st. BCD/7 seg. decoder driver (o.c.) 8-channel mux 3-state Dual 4-to-1 data select/mux 3-st. Quad 2-input mux 3-st. Quad 2-to-1 mux 3-st. 8-bit addressable latch Dual 5-input NOR gate Quad 2-IN XNOR gate (O.C.) 1-9 10-99 $0.60 0.60 0.65 0.38 0.34 0.55 0.55 0.65 4.75 1.00 0.70 0.70 4.90 0.95 0.80 0.55 0.50 2.45 0.50 0.56 0.60 0.55 0.60 0.85 0.95 0.58 1.05 0.65 0.65 3.90 3.78 2.90 0.75 3.45 0.75 0.95 2.00 0.80 0.80 0.65 0.70 0.60 0.60 0.60 0.60 1.15 0.60 0.60 0.60 0.60 0.85 0.60 0.75 $0.50 0.50 0.55 0.34 0.28 0.45 0.45 0.55 4.25 0.90 0.60 0.60 4.70 0.85 0.75 0.45 0.45 2.20 0.40 0.49 0.50 0.45 0.50 0.75 0.85 0.48 0.95 0.55 0.55 3.45 3.48 2.70 0.65 3.20 0.65 0.75 1.90 0.75 0.70 0.50 0.60 0.55 0.55 0.50 0.50 1.05 0.55 0.55 0.55 0.55 0.75 0.50 0.65 DIP IC TEST CLIPS Designed for easier DIP IC testing and troubleshooting. The heavy duty metal spring provides a firm positive grip to DIP under test. Part No. 03TC16 03TC28 03TC40-3M 220 Description 16-Pin (used for 8, 14, 16 pin IC's) 28-Pin (used for 24, 28 pin IC's) 40-Pin Width 0.3" 0.6" 0.6" Price $12.90 15.90 9.90 ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065