iBaby Labs, Inc. 2Wire 2701HG-B Port Forwarding
1. Have your camera connected to the power outlet and set up wireless at home
2. Set Static IP of iBaby monitor
a. Open iBaby App on iOS device
b. Click on Setup
c. Select Set Camera IP
d. Turn "On" Static IP
3. Open a web browser. Enter the internal IP address of your router in the address bar of
your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of
that with the internal IP address of your router. By default the IP address should be set
to 172.16.0.1.
Click the Firewall button.
iBaby Labs, Inc. Click the Firewall Settings button.
iBaby Labs, Inc. Use the Select a computer box to choose the IP Cam to forward ports to (IP cam is the MAC
address found in the iBaby app under set up>camera information). This box contains a list of
computer names that are visible on your network.
Click the Add a new user-defined application link.
iBaby Labs, Inc. We will list a series of lines here that will show you exactly how to forward the ports you need to
forward. iBaby Monitor requires you to forward the 14971 ports or as indicated in the iBaby app
(set up>camera information). Protocol Select TCP. Go ahead and enter the settings shown
above into the Edit Application menu and then click Add Definition.
Application Name:
iBaby
iBaby Labs, Inc. Protocol:
Port (or Range):
Protocol Timeout
(seconds):
Map to Host Port:
Click the Back button.
TCP
From:
UDP
14971
86400
14971
To:
TCP default=86400
UDP default=600
Default= the same port
as
defined above
iBaby Labs, Inc. Select the applications you just created in the Applications list, then click the Add button to
move them to the Hosted Applications box.
When you are finished, click the Done button at the bottom of your screen.
And that is it! You are done!